diff options
45 files changed, 1382 insertions, 1564 deletions
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt deleted file mode 100644 index 2726c1d58a79..000000000000 --- a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt +++ /dev/null @@ -1,49 +0,0 @@ -Binding for Samsung S2M and S5M family clock generator block -============================================================ - -This is a part of device tree bindings for S2M and S5M family multi-function -devices. -More information can be found in bindings/mfd/sec-core.txt file. - -The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz -outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs. - -To register these as clocks with common clock framework instantiate under -main device node a sub-node named "clocks". - -It uses the common clock binding documented in: - - Documentation/devicetree/bindings/clock/clock-bindings.txt - - -Required properties of the "clocks" sub-node: - - #clock-cells: should be 1. - - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", - "samsung,s2mps14-clk", "samsung,s5m8767-clk" - The S2MPS15 uses the same compatible as S2MPS13, as both provides similar - clocks. - - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - Clock ID Devices - ---------------------------------------------------------- - 32KhzAP 0 S2MPS11/13/14/15, S5M8767 - 32KhzCP 1 S2MPS11/13/15, S5M8767 - 32KhzBT 2 S2MPS11/13/14/15, S5M8767 - -Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines -in device tree sources. - - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - s2m_osc: clocks { - compatible = "samsung,s2mps11-clk"; - #clock-cells = <1>; - clock-output-names = "xx", "yy", "zz"; - }; - }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml new file mode 100644 index 000000000000..1410c51e0e7d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,s2mps11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2M and S5M family clock generator block + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz + outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs. + + All available clocks are defined as preprocessor macros in + dt-bindings/clock/samsung,s2mps11.h header. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +properties: + compatible: + enum: + - samsung,s2mps11-clk + - samsung,s2mps13-clk # S2MPS13 and S2MPS15 + - samsung,s2mps14-clk + - samsung,s5m8767-clk + + "#clock-cells": + const: 1 + + clock-output-names: + minItems: 3 + maxItems: 3 + description: Names for AP, CP and BT clocks. + +required: + - compatible + - "#clock-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/max8952.txt b/Documentation/devicetree/bindings/regulator/max8952.txt deleted file mode 100644 index 866fcdd0f4eb..000000000000 --- a/Documentation/devicetree/bindings/regulator/max8952.txt +++ /dev/null @@ -1,52 +0,0 @@ -Maxim MAX8952 voltage regulator - -Required properties: -- compatible: must be equal to "maxim,max8952" -- reg: I2C slave address, usually 0x60 -- max8952,dvs-mode-microvolt: array of 4 integer values defining DVS voltages - in microvolts. All values must be from range <770000, 1400000> -- any required generic properties defined in regulator.txt - -Optional properties: -- max8952,vid-gpios: array of two GPIO pins used for DVS voltage selection -- max8952,en-gpio: GPIO used to control enable status of regulator -- max8952,default-mode: index of default DVS voltage, from <0, 3> range -- max8952,sync-freq: sync frequency, must be one of following values: - - 0: 26 MHz - - 1: 13 MHz - - 2: 19.2 MHz - Defaults to 26 MHz if not specified. -- max8952,ramp-speed: voltage ramp speed, must be one of following values: - - 0: 32mV/us - - 1: 16mV/us - - 2: 8mV/us - - 3: 4mV/us - - 4: 2mV/us - - 5: 1mV/us - - 6: 0.5mV/us - - 7: 0.25mV/us - Defaults to 32mV/us if not specified. -- any available generic properties defined in regulator.txt - -Example: - - vdd_arm_reg: pmic@60 { - compatible = "maxim,max8952"; - reg = <0x60>; - - /* max8952-specific properties */ - max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; - max8952,en-gpio = <&gpx0 1 0>; - max8952,default-mode = <0>; - max8952,dvs-mode-microvolt = <1250000>, <1200000>, - <1050000>, <950000>; - max8952,sync-freq = <0>; - max8952,ramp-speed = <0>; - - /* generic regulator properties */ - regulator-name = "vdd_arm"; - regulator-min-microvolt = <770000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt deleted file mode 100644 index c2c68fcc1b41..000000000000 --- a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Maxim MAX8973 Voltage Regulator - -Required properties: - -- compatible: must be one of following: - "maxim,max8973" - "maxim,max77621". -- reg: the i2c slave address of the regulator. It should be 0x1b. - -Any standard regulator properties can be used to configure the single max8973 -DCDC. - -Optional properties: - --maxim,externally-enable: boolean, externally control the regulator output - enable/disable. --maxim,enable-gpio: GPIO for enable control. If the valid GPIO is provided - then externally enable control will be considered. --maxim,dvs-gpio: GPIO which is connected to DVS pin of device. --maxim,dvs-default-state: Default state of GPIO during initialisation. - 1 for HIGH and 0 for LOW. --maxim,enable-remote-sense: boolean, enable reote sense. --maxim,enable-falling-slew-rate: boolean, enable falling slew rate. --maxim,enable-active-discharge: boolean: enable active discharge. --maxim,enable-frequency-shift: boolean, enable 9% frequency shift. --maxim,enable-bias-control: boolean, enable bias control. By enabling this - startup delay can be reduce to 20us from 220us. --maxim,enable-etr: boolean, enable Enhanced Transient Response. --maxim,enable-high-etr-sensitivity: boolean, Enhanced transient response - circuit is enabled and set for high sensitivity. If this - property is available then etr will be enable default. - -Enhanced transient response (ETR) will affect the configuration of CKADV. - --junction-warn-millicelsius: u32, junction warning temperature threshold - in millicelsius. If die temperature crosses this level then - device generates the warning interrupts. - -Please note that thermal functionality is only supported on MAX77621. The -supported threshold warning temperature for MAX77621 are 120 degC and 140 degC. - -Example: - - max8973@1b { - compatible = "maxim,max8973"; - reg = <0x1b>; - - regulator-min-microvolt = <935000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt deleted file mode 100644 index b53c5e2b335f..000000000000 --- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt +++ /dev/null @@ -1,145 +0,0 @@ -* Maxim MAX8997 Voltage and Current Regulator - -The Maxim MAX8997 is a multi-function device which includes voltage and -current regulators, rtc, charger controller and other sub-blocks. It is -interfaced to the host controller using a i2c interface. Each sub-block is -addressed by the host system using different i2c slave address. This document -describes the bindings for 'pmic' sub-block of max8997. - -Required properties: -- compatible: Should be "maxim,max8997-pmic". -- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. - -- max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck1 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - -- max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck2 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - -- max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck5 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - -[1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional - property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage' - property should specify atleast one voltage level (which would be a - safe operating voltage). - - If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional - property is specified, then all the eight voltage values for the - 'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified. - -Optional properties: -- interrupts: Interrupt specifiers for two interrupt sources. - - First interrupt specifier is for 'irq1' interrupt. - - Second interrupt specifier is for 'alert' interrupt. -- charger-supply: regulator node for charging current. -- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs. -- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. -- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs. - -Additional properties required if either of the optional properties are used: -- max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for - multiple bucks, changing the voltage value of one of the bucks may affect - that of another buck, which is the side effect of the change (set_voltage). - Use this property to ignore such side effects and change the voltage. - -- max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from - the possible 8 options selectable by the dvs gpios. The value of this - property should be between 0 and 7. If not specified or if out of range, the - default value of this property is set to 0. - -- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used - for dvs. The format of the gpio specifier depends in the gpio controller. - -Regulators: The regulators of max8997 that have to be instantiated should be -included in a sub-node named 'regulators'. Regulator nodes included in this -sub-node should be of the format as listed below. - - regulator_name { - standard regulator bindings here - }; - -The following are the names of the regulators that the max8997 pmic block -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of max8997. - - - LDOn - - valid values for n are 1 to 18 and 21 - - Example: LDO0, LD01, LDO2, LDO21 - - BUCKn - - valid values for n are 1 to 7. - - Example: BUCK1, BUCK2, BUCK3, BUCK7 - - - ENVICHG: Battery Charging Current Monitor Output. This is a fixed - voltage type regulator - - - ESAFEOUT1: (ldo19) - - ESAFEOUT2: (ld020) - - - CHARGER_CV: main battery charger voltage control - - CHARGER: main battery charger current control - - CHARGER_TOPOFF: end of charge current threshold level - -The bindings inside the regulator nodes use the standard regulator bindings -which are documented elsewhere. - -Example: - - max8997_pmic@66 { - compatible = "maxim,max8997-pmic"; - interrupt-parent = <&wakeup_eint>; - reg = <0x66>; - interrupts = <4 0>, <3 0>; - - max8997,pmic-buck1-uses-gpio-dvs; - max8997,pmic-buck2-uses-gpio-dvs; - max8997,pmic-buck5-uses-gpio-dvs; - - max8997,pmic-ignore-gpiodvs-side-effect; - max8997,pmic-buck125-default-dvs-idx = <0>; - - max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ - <&gpx0 1 1 0 0>, /* SET2 */ - <&gpx0 2 1 0 0>; /* SET3 */ - - max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; - - max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>, - <1100000>, <1100000>, - <1000000>, <1000000>, - <1000000>, <1000000>; - - max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_ARM_1.2V"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml new file mode 100644 index 000000000000..e4e8c58f6046 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max8952.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8952 voltage regulator + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: maxim,max8952 + + max8952,default-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + index of default DVS voltage + + max8952,dvs-mode-microvolt: + minItems: 4 + maxItems: 4 + items: + minimum: 770000 + maximum: 1400000 + description: | + Array of 4 integer values defining DVS voltages in microvolts. All values + must be from range <770000, 1400000>. + + max8952,en-gpio: + maxItems: 1 + description: | + GPIO used to control enable status of regulator + + max8952,ramp-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: | + Voltage ramp speed, values map to: + - 0: 32mV/us + - 1: 16mV/us + - 2: 8mV/us + - 3: 4mV/us + - 4: 2mV/us + - 5: 1mV/us + - 6: 0.5mV/us + - 7: 0.25mV/us + Defaults to 32mV/us if not specified. + + max8952,sync-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + description: | + Sync frequency, values map to: + - 0: 26 MHz + - 1: 13 MHz + - 2: 19.2 MHz + Defaults to 26 MHz if not specified. + + max8952,vid-gpios: + minItems: 2 + maxItems: 2 + description: | + Array of two GPIO pins used for DVS voltage selection + + reg: + maxItems: 1 + +required: + - compatible + - max8952,dvs-mode-microvolt + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, + <&gpx0 4 GPIO_ACTIVE_HIGH>; + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml new file mode 100644 index 000000000000..54522827265b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max8973.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8973/MAX77621 voltage regulator + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - maxim,max8973 + - maxim,max77621 + + junction-warn-millicelsius: + description: | + Junction warning temperature threshold in millicelsius. If die + temperature crosses this level then device generates the warning + interrupts. + Please note that thermal functionality is only supported on MAX77621. The + supported threshold warning temperature for MAX77621 are 120 degC and 140 + degC. + + maxim,dvs-gpio: + maxItems: 1 + description: | + GPIO which is connected to DVS pin of device. + + maxim,dvs-default-state: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Default state of GPIO during initialisation. + 1 for HIGH and 0 for LOW. + + maxim,externally-enable: + type: boolean + description: | + Externally control the regulator output enable/disable. + + maxim,enable-gpio: + maxItems: 1 + description: | + GPIO for enable control. If the valid GPIO is provided then externally + enable control will be considered. + + maxim,enable-remote-sense: + type: boolean + description: Enable remote sense. + + maxim,enable-falling-slew-rate: + type: boolean + description: Enable falling slew rate. + + maxim,enable-active-discharge: + type: boolean + description: Eable active discharge. + + maxim,enable-frequency-shift: + type: boolean + description: Enable 9% frequency shift. + + maxim,enable-bias-control: + type: boolean + description: | + Enable bias control which can reduce the startup delay to 20us from 220us. + + maxim,enable-etr: + type: boolean + description: Enable Enhanced Transient Response. + + maxim,enable-high-etr-sensitivity: + type: boolean + description: | + Enhanced transient response circuit is enabled and set for high + sensitivity. If this property is available then etr will be enable + default. + Enhanced transient response (ETR) will affect the configuration of CKADV. + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@1b { + compatible = "maxim,max8973"; + reg = <0x1b>; + + regulator-min-microvolt = <935000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + + - | + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@1b { + compatible = "maxim,max77621"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(Y, 1) IRQ_TYPE_LEVEL_LOW>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1231250>; + regulator-name = "PPVAR_CPU"; + regulator-ramp-delay = <12500>; + maxim,dvs-default-state = <1>; + maxim,enable-active-discharge; + maxim,enable-bias-control; + maxim,enable-etr; + maxim,enable-gpio = <&pmic 5 GPIO_ACTIVE_HIGH>; + maxim,externally-enable; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml new file mode 100644 index 000000000000..d5a44ca3df04 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml @@ -0,0 +1,445 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max8997.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8997 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + The Maxim MAX8997 is a Power Management IC which includes voltage and current + regulators, charger controller with fuel gauge, RTC, clock outputs, haptic + motor driver, flash LED driver and Micro-USB Interface Controller. + + The binding here is not complete and describes only regulator and charger + controller parts. + +properties: + compatible: + const: maxim,max8997-pmic + + charger-supply: + description: | + Regulator node for charging current. + + interrupts: + items: + - description: irq1 interrupt + - description: alert interrupt + + max8997,pmic-buck1-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck1 when + changing voltage using GPIO DVS. + If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is + specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should + specify at least one voltage level (which would be a safe operating + voltage). + + max8997,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck2 when + changing voltage using GPIO DVS. + If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is + specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should + specify at least one voltage level (which would be a safe operating + voltage). + + max8997,pmic-buck5-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck5 when + changing voltage using GPIO DVS. + If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is + specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should + specify at least one voltage level (which would be a safe operating + voltage). + + max8997,pmic-buck1-uses-gpio-dvs: + type: boolean + description: | + buck1 can be controlled by GPIO DVS. + + max8997,pmic-buck2-uses-gpio-dvs: + type: boolean + description: | + buck2 can be controlled by GPIO DVS. + + max8997,pmic-buck5-uses-gpio-dvs: + type: boolean + description: | + buck5 can be controlled by GPIO DVS. + + max8997,pmic-buck125-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 0 + description: | + Default voltage setting selected from the possible 8 options selectable + by the dvs gpios. The value of this property should be between 0 and 7. + If not specified or if out of range, the default value of this property + is set to 0. + + max8997,pmic-buck125-dvs-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for DVS. + + max8997,pmic-ignore-gpiodvs-side-effect: + type: boolean + description: | + When GPIO-DVS mode is used for multiple bucks, changing the voltage value + of one of the bucks may affect that of another buck, which is the side + effect of the change (set_voltage). Use this property to ignore such + side effects and change the voltage. + + reg: + maxItems: 1 + + regulators: + type: object + description: + List of child nodes that specify the regulators. + + patternProperties: + # 1-18 and 21 LDOs + "^LDO([1-9]|1[0-8]|21)$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + # 7 bucks + "^BUCK[1-7]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + "^EN32KHZ_[AC]P$": + type: object + $ref: regulator.yaml# + description: + 32768 Hz clock output (modelled as regulator) + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + + required: + - regulator-name + + additionalProperties: false + + properties: + CHARGER: + type: object + $ref: regulator.yaml# + description: main battery charger current control + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + CHARGER_CV: + type: object + $ref: regulator.yaml# + description: main battery charger voltage control + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + CHARGER_TOPOFF: + type: object + $ref: regulator.yaml# + description: end of charge current threshold level + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + ENVICHG: + type: object + $ref: regulator.yaml# + description: | + Battery Charging Current Monitor Output. This is a fixed voltage type + regulator + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + ESAFEOUT1: + type: object + $ref: regulator.yaml# + description: LDO19 + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + + ESAFEOUT2: + type: object + $ref: regulator.yaml# + description: LDO20 + + properties: + regulator-name: true + + required: + - regulator-name + + unevaluatedProperties: false + +required: + - compatible + - max8997,pmic-buck1-dvs-voltage + - max8997,pmic-buck2-dvs-voltage + - max8997,pmic-buck5-dvs-voltage + - reg + - regulators + +dependencies: + max8997,pmic-buck1-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ] + max8997,pmic-buck2-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ] + max8997,pmic-buck5-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ] + +additionalProperties: false + +if: + anyOf: + - required: + - max8997,pmic-buck1-uses-gpio-dvs + - required: + - max8997,pmic-buck2-uses-gpio-dvs + - required: + - max8997,pmic-buck5-uses-gpio-dvs +then: + properties: + max8997,pmic-buck1-dvs-voltage: + minItems: 8 + maxItems: 8 + max8997,pmic-buck2-dvs-voltage: + minItems: 8 + maxItems: 8 + max8997,pmic-buck5-dvs-voltage: + minItems: 8 + maxItems: 8 + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + + interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, + <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>, + <&gpl0 0 GPIO_ACTIVE_HIGH>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>; + pinctrl-names = "default"; + + charger-supply = <&charger_reg>; + + regulators { + LDO1 { + regulator-name = "VADC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + BUCK1 { + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + // ... + + BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; + + EN32KHZ_CP { + regulator-name = "EN32KHZ_CP"; + regulator-always-on; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <950000>; + }; + + CHARGER_CV { + regulator-name = "CHARGER_CV"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + CHARGER_TOPOFF { + regulator-name = "CHARGER_TOPOFF"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>, + <3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&max8997_irq>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + // ... + + BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + // ... + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 34de38377aa6..b959504e0ea4 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -35,6 +35,7 @@ description: | PMIC. Supported regulator node names are For PM6150, smps1 - smps5, ldo1 - ldo19 For PM6150L, smps1 - smps8, ldo1 - ldo11, bob + For PM6350, smps1 - smps5, ldo1 - ldo22 For PM7325, smps1 - smps8, ldo1 - ldo19 For PM8005, smps1 - smps4 For PM8009, smps1 - smps2, ldo1 - ldo7 @@ -52,6 +53,7 @@ properties: enum: - qcom,pm6150-rpmh-regulators - qcom,pm6150l-rpmh-regulators + - qcom,pm6350-rpmh-regulators - qcom,pm7325-rpmh-regulators - qcom,pm8005-rpmh-regulators - qcom,pm8009-rpmh-regulators diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index 83b53579f463..f052e03be402 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -65,6 +65,9 @@ description: For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13 + For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22 + maintainers: - Kathiravan T <kathirav@codeaurora.org> @@ -86,6 +89,7 @@ properties: - qcom,rpm-pmi8994-regulators - qcom,rpm-pmi8998-regulators - qcom,rpm-pms405-regulators + - qcom,rpm-pm2250-regulators patternProperties: ".*-supply$": diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt deleted file mode 100644 index bae3c7f838cf..000000000000 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt +++ /dev/null @@ -1,79 +0,0 @@ -Binding for Samsung S2MPA01 regulator block -=========================================== - -This is a part of device tree bindings for S2M family multi-function devices. -More information can be found in bindings/mfd/sec-core.txt file. - -The S2MPA01 device provide buck and LDO regulators. - -To register these with regulator framework instantiate under main device node -a sub-node named "regulators" with more sub-nodes for each regulator using the -common regulator binding documented in: - - Documentation/devicetree/bindings/regulator/regulator.txt - - -Names of regulators supported by S2MPA01 device: - - LDOn - - valid values for n are 1 to 26 - - Example: LDO1, LD02, LDO26 - - BUCKn - - valid values for n are 1 to 10. - - Example: BUCK1, BUCK2, BUCK9 -Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of device. - - -Optional properties of buck regulator nodes under "regulators" sub-node: - - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500 - (default), 25000, or 50000. May be 0 for disabling the ramp delay on - BUCK{1,2,3,4}. - - In the absence of the regulator-ramp-delay property, the default ramp - delay will be used. - - Note: Some bucks share the ramp rate setting i.e. same ramp value - will be set for a particular group of bucks so provide the same - regulator-ramp-delay value for them. - Groups sharing ramp rate: - - buck{1,6}, - - buck{2,4}, - - buck{8,9,10}. - -Example: - - s2mpa01_pmic@66 { - compatible = "samsung,s2mpa01-pmic"; - reg = <0x66>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_MMC2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml new file mode 100644 index 000000000000..0627dec513da --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mpa01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPA01 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPA01 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml for + additional information and example. + +patternProperties: + # 26 LDOs + "^LDO([1-9]|1[0-9]|2[0-6])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 10 bucks + "^BUCK([1-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + properties: + regulator-ramp-delay: + enum: [0, 6250, 12500, 25000, 50000] + default: 12500 + description: | + May be 0 for disabling the ramp delay on BUCK{1,2,3,4}. + + In the absence of the regulator-ramp-delay property, the default ramp + delay will be used. + + Note: Some bucks share the ramp rate setting i.e. same ramp value + will be set for a particular group of bucks so provide the same + regulator-ramp-delay value for them. + Groups sharing ramp rate: + * buck{1,6}, + * buck{2,4}, + * buck{8,9,10}. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt deleted file mode 100644 index 27a48bf1b185..000000000000 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt +++ /dev/null @@ -1,102 +0,0 @@ -Binding for Samsung S2M family regulator block -============================================== - -This is a part of device tree bindings for S2M family multi-function devices. -More information can be found in bindings/mfd/sec-core.txt file. - -The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators. - -To register these with regulator framework instantiate under main device node -a sub-node named "regulators" with more sub-nodes for each regulator using the -common regulator binding documented in: - - Documentation/devicetree/bindings/regulator/regulator.txt - - -Names of regulators supported by different devices: - - LDOn - - valid values for n are: - - S2MPS11: 1 to 38 - - S2MPS13: 1 to 40 - - S2MPS14: 1 to 25 - - S2MPS15: 1 to 27 - - S2MPU02: 1 to 28 - - Example: LDO1, LDO2, LDO28 - - BUCKn - - valid values for n are: - - S2MPS11: 1 to 10 - - S2MPS13: 1 to 10 - - S2MPS14: 1 to 5 - - S2MPS15: 1 to 10 - - S2MPU02: 1 to 7 - - Example: BUCK1, BUCK2, BUCK9 -Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of device. - - -Optional properties of the nodes under "regulators" sub-node: - - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500, - 25000 (default) or 50000. - - Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6} - by setting it to <0>. - - Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value - will be set for a particular group of bucks so provide the same - regulator-ramp-delay value for them. - Groups sharing ramp rate: - - buck{1,6}, - - buck{3,4}, - - buck{7,8,10}. - - - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be - configured to external control over GPIO. To turn this feature on this - property must be added to the regulator sub-node: - - samsung,ext-control-gpios: GPIO specifier for one GPIO - controlling this regulator (enable/disable) - Example: - LDO12 { - regulator-name = "V_EMMC_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; - }; - - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml new file mode 100644 index 000000000000..e3b780715f44 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mps11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS11 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS11 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 38 LDOs + "^LDO([1-9]|[1-2][0-9]|3[0-8])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 10 bucks + "^BUCK([1-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml new file mode 100644 index 000000000000..579d77aefc3f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mps13.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS13 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS13 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 40 LDOs + "^LDO([1-9]|[1-3][0-9]|40)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 10 bucks + "^BUCK([1-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml new file mode 100644 index 000000000000..fdea290b3e94 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mps14.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS14 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS14 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 25 LDOs + "^LDO([1-9]|[1][0-9]|2[0-5])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 5 bucks + "^BUCK[1-5]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml new file mode 100644 index 000000000000..b3a883c94628 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mps15.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS15 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPS15 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 27 LDOs + "^LDO([1-9]|[1][0-9]|2[0-7])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 10 bucks + "^BUCK([1-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml new file mode 100644 index 000000000000..0ded6953e3b6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mpu02.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPU02 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S2MPU02 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +patternProperties: + # 28 LDOs + "^LDO([1-9]|1[0-9]|2[0-8])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + required: + - regulator-name + + # 7 bucks + "^BUCK[1-7]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt deleted file mode 100644 index 093edda0c8df..000000000000 --- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt +++ /dev/null @@ -1,145 +0,0 @@ -Binding for Samsung S5M8767 regulator block -=========================================== - -This is a part of device tree bindings for S5M family multi-function devices. -More information can be found in bindings/mfd/sec-core.txt file. - -The S5M8767 device provide buck and LDO regulators. - -To register these with regulator framework instantiate under main device node -a sub-node named "regulators" with more sub-nodes for each regulator using the -common regulator binding documented in: - - Documentation/devicetree/bindings/regulator/regulator.txt - - -Required properties of the main device node (the parent!): - - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck2 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - - - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck3 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - - - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck4 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - - - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used - for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines. - - [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional - property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage' - property should specify atleast one voltage level (which would be a - safe operating voltage). - - If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional - property is specified, then all the eight voltage values for the - 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified. - -Optional properties of the main device node (the parent!): - - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. - - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs. - - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs. - -Additional properties required if either of the optional properties are used: - - - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from - the possible 8 options selectable by the dvs gpios. The value of this - property should be between 0 and 7. If not specified or if out of range, the - default value of this property is set to 0. - - - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used - for dvs. The format of the gpio specifier depends in the gpio controller. - - -Names of regulators supported by S5M8767 device: - - LDOn - - valid values for n are 1 to 28 - - Example: LDO1, LDO2, LDO28 - - BUCKn - - valid values for n are 1 to 9. - - Example: BUCK1, BUCK2, BUCK9 -Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of device. - - -Optional properties of the nodes under "regulators" sub-node: - - op_mode: describes the different operating modes of the LDO's with - power mode change in SOC. The different possible values are, - 0 - always off mode - 1 - on in normal mode - 2 - low power mode - 3 - suspend mode - - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one - GPIO controlling this regulator - (enable/disable); This is valid only - for buck9. - -Example: - - s5m8767_pmic@66 { - compatible = "samsung,s5m8767-pmic"; - reg = <0x66>; - - s5m8767,pmic-buck2-uses-gpio-dvs; - s5m8767,pmic-buck3-uses-gpio-dvs; - s5m8767,pmic-buck4-uses-gpio-dvs; - - s5m8767,pmic-buck-default-dvs-idx = <0>; - - s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */ - <&gpx0 1 0>, /* DVS2 */ - <&gpx0 2 0>; /* DVS3 */ - - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */ - <&gpx2 4 0>, /* SET2 */ - <&gpx2 5 0>; /* SET3 */ - - s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; - - s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, - <1100000>, <1100000>, - <1000000>, <1000000>, - <1000000>, <1000000>; - - s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - op_mode = <1>; /* Normal Mode */ - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_MIF_1.2V"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - vemmc_reg: BUCK9 { - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <3>; /* Standby Mode */ - s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml new file mode 100644 index 000000000000..80a63d47790a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5M8767 Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The S5M8767 provides buck and LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for + additional information and example. + +patternProperties: + # 28 LDOs + "^LDO([1-9]|1[0-9]|2[0-8])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + properties: + op_mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + description: | + Describes the different operating modes of the LDO's with power mode + change in SOC. The different possible values are: + 0 - always off mode + 1 - on in normal mode + 2 - low power mode + 3 - suspend mode + + required: + - regulator-name + + # 8 bucks + "^BUCK[1-8]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + required: + - regulator-name + + # 9 buck + "^BUCK9$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single BUCK regulator. + + properties: + s5m8767,pmic-ext-control-gpios: + maxItems: 1 + description: | + GPIO specifier for one GPIO controlling this regulator on/off. + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml new file mode 100644 index 000000000000..a52a67c869b5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/silergy,sy8106a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silergy SY8106A Voltage Regulator Device Tree Bindings + +maintainers: + - Ondrej Jirman <megous@megous.com> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: silergy,sy8106a + + reg: + maxItems: 1 + + silergy,fixed-microvolt: + description: > + The voltage when I2C regulating is disabled (set by external resistor + like a fixed voltage) + +required: + - compatible + - reg + - silergy,fixed-microvolt + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "sy8106a-vdd"; + silergy,fixed-microvolt = <1200000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml index 861d5f3c79e8..1218f21ba320 100644 --- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml @@ -27,6 +27,7 @@ properties: - socionext,uniphier-pxs2-usb3-regulator - socionext,uniphier-ld20-usb3-regulator - socionext,uniphier-pxs3-usb3-regulator + - socionext,uniphier-nx1-usb3-regulator reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt b/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt deleted file mode 100644 index 39a8ca73f572..000000000000 --- a/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt +++ /dev/null @@ -1,23 +0,0 @@ -SY8106A Voltage regulator - -Required properties: -- compatible: Must be "silergy,sy8106a" -- reg: I2C slave address - must be <0x65> -- silergy,fixed-microvolt - the voltage when I2C regulating is disabled (set - by external resistor like a fixed voltage) - -Any property defined as part of the core regulator binding, defined in -./regulator.txt, can also be used. - -Example: - - sy8106a { - compatible = "silergy,sy8106a"; - reg = <0x65>; - regulator-name = "sy8106a-vdd"; - silergy,fixed-microvolt = <1200000>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-boot-on; - regulator-always-on; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 62dd1f891cf7..b2ed0eeed481 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16561,10 +16561,10 @@ M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> L: linux-kernel@vger.kernel.org L: linux-samsung-soc@vger.kernel.org S: Supported -F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt +F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt -F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt -F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt +F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml +F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml F: drivers/clk/clk-s2mps11.c F: drivers/mfd/sec*.c F: drivers/regulator/s2m*.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 4fd13b06231f..6be9b1c8a615 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -609,12 +609,12 @@ config REGULATOR_MAX8952 modes ranging from 0.77V to 1.40V by 0.01V steps. config REGULATOR_MAX8973 - tristate "Maxim MAX8973 voltage regulator " + tristate "Maxim MAX8973A voltage regulator" depends on I2C depends on THERMAL && THERMAL_OF select REGMAP_I2C help - The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down + The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down switching regulator delivers up to 9A of output current. Each phase operates at a 2MHz fixed frequency with a 120 deg shift from the adjacent phase, allowing the use of small magnetic component. @@ -1181,7 +1181,7 @@ config REGULATOR_STPMIC1 config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" - depends on ARCH_OMAP + depends on ARCH_OMAP || COMPILE_TEST help Select this option to support Texas Instruments' on-chip Adaptive Body Bias (ABB) LDO regulators. It is recommended that this option be @@ -1339,15 +1339,6 @@ config REGULATOR_TPS65912 help This driver supports TPS65912 voltage regulator chip. -config REGULATOR_TPS80031 - tristate "TI TPS80031/TPS80032 power regulator driver" - depends on MFD_TPS80031 - help - TPS80031/ TPS80032 Fully Integrated Power Management with Power - Path and Battery Charger. It has 5 configurable step-down - converters, 11 general purpose LDOs, VBUS generator and digital - output to control regulators. - config REGULATOR_TWL4030 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" depends on TWL4030_CORE diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 9e382b50a5ef..b07d2a22df0b 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -158,7 +158,6 @@ obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o -obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c index 16edd9062ca9..acaa6607898e 100644 --- a/drivers/regulator/bd71815-regulator.c +++ b/drivers/regulator/bd71815-regulator.c @@ -461,9 +461,9 @@ static const struct regulator_ops bd7181x_led_regulator_ops = { .min_uV = (min), \ .uV_step = (step), \ .vsel_reg = (vsel), \ - .vsel_mask = 0x3f, \ + .vsel_mask = BD71815_VOLT_MASK, \ .enable_reg = (ereg), \ - .enable_mask = 0x04, \ + .enable_mask = BD71815_BUCK_RUN_ON, \ .ramp_reg = (ereg), \ .ramp_mask = BD71815_BUCK_RAMPRATE_MASK, \ .ramp_delay_table = bd7181x_ramp_table, \ diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f4d441b1a8bf..86aa4141efa9 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1151,9 +1151,10 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, } if (current_uV < 0) { - rdev_err(rdev, - "failed to get the current voltage: %pe\n", - ERR_PTR(current_uV)); + if (current_uV != -EPROBE_DEFER) + rdev_err(rdev, + "failed to get the current voltage: %pe\n", + ERR_PTR(current_uV)); return current_uV; } @@ -1570,7 +1571,7 @@ static int set_supply(struct regulator_dev *rdev, { int err; - rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev)); + rdev_dbg(rdev, "supplied by %s\n", rdev_get_name(supply_rdev)); if (!try_module_get(supply_rdev->owner)) return -ENODEV; @@ -4248,6 +4249,9 @@ int regulator_sync_voltage(struct regulator *regulator) struct regulator_voltage *voltage = ®ulator->voltage[PM_SUSPEND_ON]; int ret, min_uV, max_uV; + if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) + return 0; + regulator_lock(rdev); if (!rdev->desc->ops->set_voltage && diff --git a/drivers/regulator/dummy.c b/drivers/regulator/dummy.c index d8059f596391..24e586f93855 100644 --- a/drivers/regulator/dummy.c +++ b/drivers/regulator/dummy.c @@ -45,7 +45,8 @@ static int dummy_regulator_probe(struct platform_device *pdev) config.dev = &pdev->dev; config.init_data = &dummy_initdata; - dummy_regulator_rdev = regulator_register(&dummy_desc, &config); + dummy_regulator_rdev = devm_regulator_register(&pdev->dev, &dummy_desc, + &config); if (IS_ERR(dummy_regulator_rdev)) { ret = PTR_ERR(dummy_regulator_rdev); pr_err("Failed to register regulator: %d\n", ret); diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index e84be29533f4..35d826fe9def 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -10,13 +10,12 @@ #include <linux/i2c.h> #include <linux/regmap.h> #include <linux/err.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/delay.h> #include <linux/regulator/lp872x.h> #include <linux/regulator/driver.h> #include <linux/platform_device.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/regulator/of_regulator.h> /* Registers : LP8720/8725 shared */ @@ -104,7 +103,7 @@ struct lp872x { enum lp872x_id chipid; struct lp872x_platform_data *pdata; int num_regulators; - enum lp872x_dvs_state dvs_pin; + enum gpiod_flags dvs_pin; }; /* LP8720/LP8725 shared voltage table for LDOs */ @@ -250,12 +249,12 @@ static int lp872x_regulator_enable_time(struct regulator_dev *rdev) } static void lp872x_set_dvs(struct lp872x *lp, enum lp872x_dvs_sel dvs_sel, - int gpio) + struct gpio_desc *gpio) { - enum lp872x_dvs_state state; + enum gpiod_flags state; - state = dvs_sel == SEL_V1 ? DVS_HIGH : DVS_LOW; - gpio_set_value(gpio, state); + state = dvs_sel == SEL_V1 ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + gpiod_set_value(gpio, state); lp->dvs_pin = state; } @@ -270,7 +269,7 @@ static u8 lp872x_select_buck_vout_addr(struct lp872x *lp, switch (buck) { case LP8720_ID_BUCK: if (val & LP8720_EXT_DVS_M) { - addr = (lp->dvs_pin == DVS_HIGH) ? + addr = (lp->dvs_pin == GPIOD_OUT_HIGH) ? LP8720_BUCK_VOUT1 : LP8720_BUCK_VOUT2; } else { if (lp872x_read_byte(lp, LP8720_ENABLE, &val)) @@ -284,7 +283,7 @@ static u8 lp872x_select_buck_vout_addr(struct lp872x *lp, if (val & LP8725_DVS1_M) addr = LP8725_BUCK1_VOUT1; else - addr = (lp->dvs_pin == DVS_HIGH) ? + addr = (lp->dvs_pin == GPIOD_OUT_HIGH) ? LP8725_BUCK1_VOUT1 : LP8725_BUCK1_VOUT2; break; case LP8725_ID_BUCK2: @@ -321,7 +320,7 @@ static int lp872x_buck_set_voltage_sel(struct regulator_dev *rdev, u8 addr, mask = LP872X_VOUT_M; struct lp872x_dvs *dvs = lp->pdata ? lp->pdata->dvs : NULL; - if (dvs && gpio_is_valid(dvs->gpio)) + if (dvs && dvs->gpio) lp872x_set_dvs(lp, dvs->vsel, dvs->gpio); addr = lp872x_select_buck_vout_addr(lp, buck); @@ -675,24 +674,23 @@ static const struct regulator_desc lp8725_regulator_desc[] = { static int lp872x_init_dvs(struct lp872x *lp) { - int ret, gpio; struct lp872x_dvs *dvs = lp->pdata ? lp->pdata->dvs : NULL; - enum lp872x_dvs_state pinstate; + enum gpiod_flags pinstate; u8 mask[] = { LP8720_EXT_DVS_M, LP8725_DVS1_M | LP8725_DVS2_M }; u8 default_dvs_mode[] = { LP8720_DEFAULT_DVS, LP8725_DEFAULT_DVS }; if (!dvs) goto set_default_dvs_mode; - gpio = dvs->gpio; - if (!gpio_is_valid(gpio)) + if (!dvs->gpio) goto set_default_dvs_mode; pinstate = dvs->init_state; - ret = devm_gpio_request_one(lp->dev, gpio, pinstate, "LP872X DVS"); - if (ret) { - dev_err(lp->dev, "gpio request err: %d\n", ret); - return ret; + dvs->gpio = devm_gpiod_get_optional(lp->dev, "ti,dvs", pinstate); + + if (IS_ERR(dvs->gpio)) { + dev_err(lp->dev, "gpio request err: %ld\n", PTR_ERR(dvs->gpio)); + return PTR_ERR(dvs->gpio); } lp->dvs_pin = pinstate; @@ -706,20 +704,17 @@ set_default_dvs_mode: static int lp872x_hw_enable(struct lp872x *lp) { - int ret, gpio; - if (!lp->pdata) return -EINVAL; - gpio = lp->pdata->enable_gpio; - if (!gpio_is_valid(gpio)) + if (!lp->pdata->enable_gpio) return 0; /* Always set enable GPIO high. */ - ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN"); - if (ret) { - dev_err(lp->dev, "gpio request err: %d\n", ret); - return ret; + lp->pdata->enable_gpio = devm_gpiod_get_optional(lp->dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(lp->pdata->enable_gpio)) { + dev_err(lp->dev, "gpio request err: %ld\n", PTR_ERR(lp->pdata->enable_gpio)); + return PTR_ERR(lp->pdata->enable_gpio); } /* Each chip has a different enable delay. */ @@ -844,12 +839,9 @@ static struct lp872x_platform_data if (!pdata->dvs) return ERR_PTR(-ENOMEM); - pdata->dvs->gpio = of_get_named_gpio(np, "ti,dvs-gpio", 0); of_property_read_u8(np, "ti,dvs-vsel", (u8 *)&pdata->dvs->vsel); of_property_read_u8(np, "ti,dvs-state", &dvs_state); - pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; - - pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0); + pdata->dvs->init_state = dvs_state ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; if (of_get_child_count(np) == 0) goto out; diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c index 8da8f9b6c4fd..80b65cb87cef 100644 --- a/drivers/regulator/max8973-regulator.c +++ b/drivers/regulator/max8973-regulator.c @@ -1,7 +1,7 @@ /* - * max8973-regulator.c -- Maxim max8973 + * max8973-regulator.c -- Maxim max8973A * - * Regulator driver for MAXIM 8973 DC-DC step-down switching regulator. + * Regulator driver for MAXIM 8973A DC-DC step-down switching regulator. * * Copyright (c) 2012, NVIDIA Corporation. * diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index 7629476d94ae..b9eeaff1c661 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -352,15 +352,9 @@ static int pwm_regulator_probe(struct platform_device *pdev) config.init_data = init_data; drvdata->pwm = devm_pwm_get(&pdev->dev, NULL); - if (IS_ERR(drvdata->pwm)) { - ret = PTR_ERR(drvdata->pwm); - if (ret == -EPROBE_DEFER) - dev_dbg(&pdev->dev, - "Failed to get PWM, deferring probe\n"); - else - dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret); - return ret; - } + if (IS_ERR(drvdata->pwm)) + return dev_err_probe(&pdev->dev, PTR_ERR(drvdata->pwm), + "Failed to get PWM\n"); if (init_data->constraints.boot_on || init_data->constraints.always_on) gpio_flags = GPIOD_OUT_HIGH; diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 7f458d510483..12425f667c00 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -1047,6 +1047,34 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = { {} }; +static const struct rpmh_vreg_init_data pm6350_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, NULL), + RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps510, NULL), + /* smps3 - smps5 not configured */ + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, NULL), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, NULL), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_pldo, NULL), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, NULL), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, NULL), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, NULL), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, NULL), + RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, NULL), + RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, NULL), + RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, NULL), + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, NULL), + RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo, NULL), + RPMH_VREG("ldo13", "ldo%s13", &pmic5_nldo, NULL), + RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo, NULL), + RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo, NULL), + RPMH_VREG("ldo16", "ldo%s16", &pmic5_nldo, NULL), + /* ldo17 not configured */ + RPMH_VREG("ldo18", "ldo%s18", &pmic5_nldo, NULL), + RPMH_VREG("ldo19", "ldo%s19", &pmic5_nldo, NULL), + RPMH_VREG("ldo20", "ldo%s20", &pmic5_nldo, NULL), + RPMH_VREG("ldo21", "ldo%s21", &pmic5_nldo, NULL), + RPMH_VREG("ldo22", "ldo%s22", &pmic5_nldo, NULL), +}; + static const struct rpmh_vreg_init_data pmx55_vreg_data[] = { RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"), RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps510, "vdd-s2"), @@ -1202,6 +1230,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .data = pm6150l_vreg_data, }, { + .compatible = "qcom,pm6350-rpmh-regulators", + .data = pm6350_vreg_data, + }, + { .compatible = "qcom,pmc8180-rpmh-regulators", .data = pm8150_vreg_data, }, diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 198fcc6551f6..8bac024dde8b 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -738,6 +738,24 @@ static const struct regulator_desc mp5496_ldoa2 = { .ops = &rpm_mp5496_ops, }; +static const struct regulator_desc pm2250_lvftsmps = { + .linear_ranges = (struct linear_range[]) { + REGULATOR_LINEAR_RANGE(320000, 0, 269, 4000), + }, + .n_linear_ranges = 1, + .n_voltages = 270, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm2250_ftsmps = { + .linear_ranges = (struct linear_range[]) { + REGULATOR_LINEAR_RANGE(640000, 0, 269, 8000), + }, + .n_linear_ranges = 1, + .n_voltages = 270, + .ops = &rpm_smps_ldo_ops, +}; + struct rpm_regulator_data { const char *name; u32 type; @@ -1170,6 +1188,36 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pm2250_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPA, 1, &pm2250_lvftsmps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPA, 2, &pm2250_lvftsmps, "vdd_s2" }, + { "s3", QCOM_SMD_RPM_SMPA, 3, &pm2250_lvftsmps, "vdd_s3" }, + { "s4", QCOM_SMD_RPM_SMPA, 4, &pm2250_ftsmps, "vdd_s4" }, + { "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l4", QCOM_SMD_RPM_LDOA, 4, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" }, + { "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" }, + { "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" }, + { "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" }, + { "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" }, + { "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" }, + { "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" }, + { "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" }, + { "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" }, + { "l20", QCOM_SMD_RPM_LDOA, 20, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" }, + { "l21", QCOM_SMD_RPM_LDOA, 21, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" }, + { "l22", QCOM_SMD_RPM_LDOA, 22, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" }, + {} +}; + static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators }, { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, @@ -1186,6 +1234,7 @@ static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pmi8994-regulators", .data = &rpm_pmi8994_regulators }, { .compatible = "qcom,rpm-pmi8998-regulators", .data = &rpm_pmi8998_regulators }, { .compatible = "qcom,rpm-pms405-regulators", .data = &rpm_pms405_regulators }, + { .compatible = "qcom,rpm-pm2250-regulators", .data = &rpm_pm2250_regulators }, {} }; MODULE_DEVICE_TABLE(of, rpm_of_match); diff --git a/drivers/regulator/rtq6752-regulator.c b/drivers/regulator/rtq6752-regulator.c index 609d3fcf4923..dfe45fb67353 100644 --- a/drivers/regulator/rtq6752-regulator.c +++ b/drivers/regulator/rtq6752-regulator.c @@ -54,14 +54,14 @@ static int rtq6752_set_vdd_enable(struct regulator_dev *rdev) int rid = rdev_get_id(rdev), ret; mutex_lock(&priv->lock); - if (priv->enable_gpio) { - gpiod_set_value(priv->enable_gpio, 1); + if (!priv->enable_flag) { + if (priv->enable_gpio) { + gpiod_set_value(priv->enable_gpio, 1); - usleep_range(RTQ6752_I2CRDY_TIMEUS, - RTQ6752_I2CRDY_TIMEUS + 100); - } + usleep_range(RTQ6752_I2CRDY_TIMEUS, + RTQ6752_I2CRDY_TIMEUS + 100); + } - if (!priv->enable_flag) { regcache_cache_only(priv->regmap, false); ret = regcache_sync(priv->regmap); if (ret) { @@ -91,11 +91,11 @@ static int rtq6752_set_vdd_disable(struct regulator_dev *rdev) if (!priv->enable_flag) { regcache_cache_only(priv->regmap, true); regcache_mark_dirty(priv->regmap); - } - if (priv->enable_gpio) - gpiod_set_value(priv->enable_gpio, 0); + if (priv->enable_gpio) + gpiod_set_value(priv->enable_gpio, 0); + } mutex_unlock(&priv->lock); return 0; diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 7c111bbdc2af..35269f998210 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -850,18 +850,15 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) /* DS4 GPIO */ gpio_direction_output(pdata->buck_ds[2], 0x0); - if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs || - pdata->buck4_gpiodvs) { - regmap_update_bits(s5m8767->iodev->regmap_pmic, - S5M8767_REG_BUCK2CTRL, 1 << 1, - (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1)); - regmap_update_bits(s5m8767->iodev->regmap_pmic, - S5M8767_REG_BUCK3CTRL, 1 << 1, - (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1)); - regmap_update_bits(s5m8767->iodev->regmap_pmic, - S5M8767_REG_BUCK4CTRL, 1 << 1, - (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1)); - } + regmap_update_bits(s5m8767->iodev->regmap_pmic, + S5M8767_REG_BUCK2CTRL, 1 << 1, + (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1)); + regmap_update_bits(s5m8767->iodev->regmap_pmic, + S5M8767_REG_BUCK3CTRL, 1 << 1, + (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1)); + regmap_update_bits(s5m8767->iodev->regmap_pmic, + S5M8767_REG_BUCK4CTRL, 1 << 1, + (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1)); /* Initialize GPIO DVS registers */ for (i = 0; i < 8; i++) { diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c index 8360b3947ead..22fddf868e4c 100644 --- a/drivers/regulator/sy7636a-regulator.c +++ b/drivers/regulator/sy7636a-regulator.c @@ -70,7 +70,7 @@ static const struct regulator_desc desc = { static int sy7636a_regulator_probe(struct platform_device *pdev) { - struct regmap *regmap = dev_get_drvdata(pdev->dev.parent); + struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL); struct regulator_config config = { }; struct regulator_dev *rdev; struct gpio_desc *gdp; diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c index 9f0a4d50cead..2931a0b89bff 100644 --- a/drivers/regulator/ti-abb-regulator.c +++ b/drivers/regulator/ti-abb-regulator.c @@ -725,9 +725,7 @@ static int ti_abb_probe(struct platform_device *pdev) /* Map ABB resources */ if (abb->regs->setup_off || abb->regs->control_off) { - pname = "base-address"; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname); - abb->base = devm_ioremap_resource(dev, res); + abb->base = devm_platform_ioremap_resource_byname(pdev, "base-address"); if (IS_ERR(abb->base)) return PTR_ERR(abb->base); @@ -735,35 +733,18 @@ static int ti_abb_probe(struct platform_device *pdev) abb->control_reg = abb->base + abb->regs->control_off; } else { - pname = "control-address"; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname); - abb->control_reg = devm_ioremap_resource(dev, res); + abb->control_reg = devm_platform_ioremap_resource_byname(pdev, "control-address"); if (IS_ERR(abb->control_reg)) return PTR_ERR(abb->control_reg); - pname = "setup-address"; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname); - abb->setup_reg = devm_ioremap_resource(dev, res); + abb->setup_reg = devm_platform_ioremap_resource_byname(pdev, "setup-address"); if (IS_ERR(abb->setup_reg)) return PTR_ERR(abb->setup_reg); } - pname = "int-address"; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname); - if (!res) { - dev_err(dev, "Missing '%s' IO resource\n", pname); - return -ENODEV; - } - /* - * We may have shared interrupt register offsets which are - * write-1-to-clear between domains ensuring exclusivity. - */ - abb->int_base = devm_ioremap(dev, res->start, - resource_size(res)); - if (!abb->int_base) { - dev_err(dev, "Unable to map '%s'\n", pname); - return -ENOMEM; - } + abb->int_base = devm_platform_ioremap_resource_byname(pdev, "int-address"); + if (IS_ERR(abb->int_base)) + return PTR_ERR(abb->int_base); /* Map Optional resources */ pname = "efuse-address"; diff --git a/drivers/regulator/tps62360-regulator.c b/drivers/regulator/tps62360-regulator.c index 315cd5daf480..574958690ace 100644 --- a/drivers/regulator/tps62360-regulator.c +++ b/drivers/regulator/tps62360-regulator.c @@ -28,13 +28,12 @@ #include <linux/err.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/regulator/of_regulator.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps62360.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/slab.h> #include <linux/regmap.h> @@ -65,8 +64,8 @@ struct tps62360_chip { struct regulator_desc desc; struct regulator_dev *rdev; struct regmap *regmap; - int vsel0_gpio; - int vsel1_gpio; + struct gpio_desc *vsel0_gpio; + struct gpio_desc *vsel1_gpio; u8 voltage_reg_mask; bool en_internal_pulldn; bool en_discharge; @@ -165,8 +164,8 @@ static int tps62360_dcdc_set_voltage_sel(struct regulator_dev *dev, /* Select proper VSET register vio gpios */ if (tps->valid_gpios) { - gpio_set_value_cansleep(tps->vsel0_gpio, new_vset_id & 0x1); - gpio_set_value_cansleep(tps->vsel1_gpio, + gpiod_set_value_cansleep(tps->vsel0_gpio, new_vset_id & 0x1); + gpiod_set_value_cansleep(tps->vsel1_gpio, (new_vset_id >> 1) & 0x1); } return 0; @@ -310,9 +309,6 @@ static struct tps62360_regulator_platform_data * return NULL; } - pdata->vsel0_gpio = of_get_named_gpio(np, "vsel0-gpio", 0); - pdata->vsel1_gpio = of_get_named_gpio(np, "vsel1-gpio", 0); - if (of_find_property(np, "ti,vsel0-state-high", NULL)) pdata->vsel0_def_state = 1; @@ -349,6 +345,7 @@ static int tps62360_probe(struct i2c_client *client, int ret; int i; int chip_id; + int gpio_flags; pdata = dev_get_platdata(&client->dev); @@ -390,8 +387,6 @@ static int tps62360_probe(struct i2c_client *client, tps->en_discharge = pdata->en_discharge; tps->en_internal_pulldn = pdata->en_internal_pulldn; - tps->vsel0_gpio = pdata->vsel0_gpio; - tps->vsel1_gpio = pdata->vsel1_gpio; tps->dev = &client->dev; switch (chip_id) { @@ -426,29 +421,27 @@ static int tps62360_probe(struct i2c_client *client, tps->lru_index[0] = tps->curr_vset_id; tps->valid_gpios = false; - if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) { - int gpio_flags; - gpio_flags = (pdata->vsel0_def_state) ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; - ret = devm_gpio_request_one(&client->dev, tps->vsel0_gpio, - gpio_flags, "tps62360-vsel0"); - if (ret) { - dev_err(&client->dev, - "%s(): Could not obtain vsel0 GPIO %d: %d\n", - __func__, tps->vsel0_gpio, ret); - return ret; - } + gpio_flags = (pdata->vsel0_def_state) ? + GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + tps->vsel0_gpio = devm_gpiod_get_optional(&client->dev, "vsel0", gpio_flags); + if (IS_ERR(tps->vsel0_gpio)) { + dev_err(&client->dev, + "%s(): Could not obtain vsel0 GPIO: %ld\n", + __func__, PTR_ERR(tps->vsel0_gpio)); + return PTR_ERR(tps->vsel0_gpio); + } - gpio_flags = (pdata->vsel1_def_state) ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; - ret = devm_gpio_request_one(&client->dev, tps->vsel1_gpio, - gpio_flags, "tps62360-vsel1"); - if (ret) { - dev_err(&client->dev, - "%s(): Could not obtain vsel1 GPIO %d: %d\n", - __func__, tps->vsel1_gpio, ret); - return ret; - } + gpio_flags = (pdata->vsel1_def_state) ? + GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + tps->vsel1_gpio = devm_gpiod_get_optional(&client->dev, "vsel1", gpio_flags); + if (IS_ERR(tps->vsel1_gpio)) { + dev_err(&client->dev, + "%s(): Could not obtain vsel1 GPIO: %ld\n", + __func__, PTR_ERR(tps->vsel1_gpio)); + return PTR_ERR(tps->vsel1_gpio); + } + + if (tps->vsel0_gpio != NULL && tps->vsel1_gpio != NULL) { tps->valid_gpios = true; /* diff --git a/drivers/regulator/tps80031-regulator.c b/drivers/regulator/tps80031-regulator.c deleted file mode 100644 index a29e65230132..000000000000 --- a/drivers/regulator/tps80031-regulator.c +++ /dev/null @@ -1,753 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// tps80031-regulator.c -- TI TPS80031 regulator driver. -// -// Regulator driver for TI TPS80031/TPS80032 Fully Integrated Power -// Management with Power Path and Battery Charger. -// -// Copyright (c) 2012, NVIDIA Corporation. -// -// Author: Laxman Dewangan <ldewangan@nvidia.com> - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mfd/tps80031.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/regulator/driver.h> -#include <linux/regulator/machine.h> -#include <linux/slab.h> - -/* Flags for DCDC Voltage reading */ -#define DCDC_OFFSET_EN BIT(0) -#define DCDC_EXTENDED_EN BIT(1) -#define TRACK_MODE_ENABLE BIT(2) - -#define SMPS_MULTOFFSET_VIO BIT(1) -#define SMPS_MULTOFFSET_SMPS1 BIT(3) -#define SMPS_MULTOFFSET_SMPS2 BIT(4) -#define SMPS_MULTOFFSET_SMPS3 BIT(6) -#define SMPS_MULTOFFSET_SMPS4 BIT(0) - -#define SMPS_CMD_MASK 0xC0 -#define SMPS_VSEL_MASK 0x3F -#define LDO_VSEL_MASK 0x1F -#define LDO_TRACK_VSEL_MASK 0x3F - -#define MISC2_LDOUSB_IN_VSYS BIT(4) -#define MISC2_LDOUSB_IN_PMID BIT(3) -#define MISC2_LDOUSB_IN_MASK 0x18 - -#define MISC2_LDO3_SEL_VIB_VAL BIT(0) -#define MISC2_LDO3_SEL_VIB_MASK 0x1 - -#define BOOST_HW_PWR_EN BIT(5) -#define BOOST_HW_PWR_EN_MASK BIT(5) - -#define OPA_MODE_EN BIT(6) -#define OPA_MODE_EN_MASK BIT(6) - -#define USB_VBUS_CTRL_SET 0x04 -#define USB_VBUS_CTRL_CLR 0x05 -#define VBUS_DISCHRG 0x20 - -struct tps80031_regulator_info { - /* Regulator register address.*/ - u8 trans_reg; - u8 state_reg; - u8 force_reg; - u8 volt_reg; - u8 volt_id; - - /*Power request bits */ - int preq_bit; - - /* used by regulator core */ - struct regulator_desc desc; - -}; - -struct tps80031_regulator { - struct device *dev; - struct tps80031_regulator_info *rinfo; - - u8 device_flags; - unsigned int config_flags; - unsigned int ext_ctrl_flag; -}; - -static inline struct device *to_tps80031_dev(struct regulator_dev *rdev) -{ - return rdev_get_dev(rdev)->parent->parent; -} - -static int tps80031_reg_is_enabled(struct regulator_dev *rdev) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - u8 reg_val; - int ret; - - if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ) - return true; - - ret = tps80031_read(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg, - ®_val); - if (ret < 0) { - dev_err(&rdev->dev, "Reg 0x%02x read failed, err = %d\n", - ri->rinfo->state_reg, ret); - return ret; - } - return (reg_val & TPS80031_STATE_MASK) == TPS80031_STATE_ON; -} - -static int tps80031_reg_enable(struct regulator_dev *rdev) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - int ret; - - if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ) - return 0; - - ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg, - TPS80031_STATE_ON, TPS80031_STATE_MASK); - if (ret < 0) { - dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n", - ri->rinfo->state_reg, ret); - return ret; - } - return ret; -} - -static int tps80031_reg_disable(struct regulator_dev *rdev) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - int ret; - - if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ) - return 0; - - ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg, - TPS80031_STATE_OFF, TPS80031_STATE_MASK); - if (ret < 0) - dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n", - ri->rinfo->state_reg, ret); - return ret; -} - -/* DCDC voltages for the selector of 58 to 63 */ -static const int tps80031_dcdc_voltages[4][5] = { - { 1350, 1500, 1800, 1900, 2100}, - { 1350, 1500, 1800, 1900, 2100}, - { 2084, 2315, 2778, 2932, 3241}, - { 4167, 2315, 2778, 2932, 3241}, -}; - -static int tps80031_dcdc_list_voltage(struct regulator_dev *rdev, unsigned sel) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - int volt_index = ri->device_flags & 0x3; - - if (sel == 0) - return 0; - else if (sel < 58) - return regulator_list_voltage_linear(rdev, sel - 1); - else - return tps80031_dcdc_voltages[volt_index][sel - 58] * 1000; -} - -static int tps80031_dcdc_set_voltage_sel(struct regulator_dev *rdev, - unsigned vsel) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - int ret; - u8 reg_val; - - if (ri->rinfo->force_reg) { - ret = tps80031_read(parent, ri->rinfo->volt_id, - ri->rinfo->force_reg, ®_val); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", - ri->rinfo->force_reg, ret); - return ret; - } - if (!(reg_val & SMPS_CMD_MASK)) { - ret = tps80031_update(parent, ri->rinfo->volt_id, - ri->rinfo->force_reg, vsel, SMPS_VSEL_MASK); - if (ret < 0) - dev_err(ri->dev, - "reg 0x%02x update failed, e = %d\n", - ri->rinfo->force_reg, ret); - return ret; - } - } - ret = tps80031_update(parent, ri->rinfo->volt_id, - ri->rinfo->volt_reg, vsel, SMPS_VSEL_MASK); - if (ret < 0) - dev_err(ri->dev, "reg 0x%02x update failed, e = %d\n", - ri->rinfo->volt_reg, ret); - return ret; -} - -static int tps80031_dcdc_get_voltage_sel(struct regulator_dev *rdev) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - uint8_t vsel = 0; - int ret; - - if (ri->rinfo->force_reg) { - ret = tps80031_read(parent, ri->rinfo->volt_id, - ri->rinfo->force_reg, &vsel); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", - ri->rinfo->force_reg, ret); - return ret; - } - - if (!(vsel & SMPS_CMD_MASK)) - return vsel & SMPS_VSEL_MASK; - } - ret = tps80031_read(parent, ri->rinfo->volt_id, - ri->rinfo->volt_reg, &vsel); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", - ri->rinfo->volt_reg, ret); - return ret; - } - return vsel & SMPS_VSEL_MASK; -} - -static int tps80031_ldo_list_voltage(struct regulator_dev *rdev, - unsigned int sel) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - - /* Check for valid setting for TPS80031 or TPS80032-ES1.0 */ - if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) && - (ri->device_flags & TRACK_MODE_ENABLE)) { - unsigned nvsel = (sel) & 0x1F; - if (((tps80031_get_chip_info(parent) == TPS80031) || - ((tps80031_get_chip_info(parent) == TPS80032) && - (tps80031_get_pmu_version(parent) == 0x0))) && - ((nvsel == 0x0) || (nvsel >= 0x19 && nvsel <= 0x1F))) { - dev_err(ri->dev, - "Invalid sel %d in track mode LDO2\n", - nvsel); - return -EINVAL; - } - } - - return regulator_list_voltage_linear(rdev, sel); -} - -static int tps80031_ldo_map_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - - /* Check for valid setting for TPS80031 or TPS80032-ES1.0 */ - if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) && - (ri->device_flags & TRACK_MODE_ENABLE)) { - if (((tps80031_get_chip_info(parent) == TPS80031) || - ((tps80031_get_chip_info(parent) == TPS80032) && - (tps80031_get_pmu_version(parent) == 0x0)))) { - return regulator_map_voltage_iterate(rdev, min_uV, - max_uV); - } - } - - return regulator_map_voltage_linear(rdev, min_uV, max_uV); -} - -static int tps80031_vbus_is_enabled(struct regulator_dev *rdev) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - int ret; - uint8_t ctrl1 = 0; - uint8_t ctrl3 = 0; - - ret = tps80031_read(parent, TPS80031_SLAVE_ID2, - TPS80031_CHARGERUSB_CTRL1, &ctrl1); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", - TPS80031_CHARGERUSB_CTRL1, ret); - return ret; - } - ret = tps80031_read(parent, TPS80031_SLAVE_ID2, - TPS80031_CHARGERUSB_CTRL3, &ctrl3); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", - TPS80031_CHARGERUSB_CTRL3, ret); - return ret; - } - if ((ctrl1 & OPA_MODE_EN) && (ctrl3 & BOOST_HW_PWR_EN)) - return 1; - return ret; -} - -static int tps80031_vbus_enable(struct regulator_dev *rdev) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - int ret; - - ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2, - TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", - TPS80031_CHARGERUSB_CTRL1, ret); - return ret; - } - - ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2, - TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", - TPS80031_CHARGERUSB_CTRL3, ret); - return ret; - } - return ret; -} - -static int tps80031_vbus_disable(struct regulator_dev *rdev) -{ - struct tps80031_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps80031_dev(rdev); - int ret; - - if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) { - ret = tps80031_write(parent, TPS80031_SLAVE_ID2, - USB_VBUS_CTRL_SET, VBUS_DISCHRG); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n", - USB_VBUS_CTRL_SET, ret); - return ret; - } - } - - ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2, - TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n", - TPS80031_CHARGERUSB_CTRL1, ret); - return ret; - } - - ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2, - TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n", - TPS80031_CHARGERUSB_CTRL3, ret); - return ret; - } - - mdelay(DIV_ROUND_UP(ri->rinfo->desc.enable_time, 1000)); - if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) { - ret = tps80031_write(parent, TPS80031_SLAVE_ID2, - USB_VBUS_CTRL_CLR, VBUS_DISCHRG); - if (ret < 0) { - dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n", - USB_VBUS_CTRL_CLR, ret); - return ret; - } - } - return ret; -} - -static const struct regulator_ops tps80031_dcdc_ops = { - .list_voltage = tps80031_dcdc_list_voltage, - .set_voltage_sel = tps80031_dcdc_set_voltage_sel, - .get_voltage_sel = tps80031_dcdc_get_voltage_sel, - .enable = tps80031_reg_enable, - .disable = tps80031_reg_disable, - .is_enabled = tps80031_reg_is_enabled, -}; - -static const struct regulator_ops tps80031_ldo_ops = { - .list_voltage = tps80031_ldo_list_voltage, - .map_voltage = tps80031_ldo_map_voltage, - .set_voltage_sel = regulator_set_voltage_sel_regmap, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .enable = tps80031_reg_enable, - .disable = tps80031_reg_disable, - .is_enabled = tps80031_reg_is_enabled, -}; - -static const struct regulator_ops tps80031_vbus_sw_ops = { - .list_voltage = regulator_list_voltage_linear, - .enable = tps80031_vbus_enable, - .disable = tps80031_vbus_disable, - .is_enabled = tps80031_vbus_is_enabled, -}; - -static const struct regulator_ops tps80031_vbus_hw_ops = { - .list_voltage = regulator_list_voltage_linear, -}; - -static const struct regulator_ops tps80031_ext_reg_ops = { - .list_voltage = regulator_list_voltage_linear, - .enable = tps80031_reg_enable, - .disable = tps80031_reg_disable, - .is_enabled = tps80031_reg_is_enabled, -}; - -/* Non-exiting default definition for some register */ -#define TPS80031_SMPS3_CFG_FORCE 0 -#define TPS80031_SMPS4_CFG_FORCE 0 - -#define TPS80031_VBUS_CFG_TRANS 0 -#define TPS80031_VBUS_CFG_STATE 0 - -#define TPS80031_REG_SMPS(_id, _volt_id, _pbit) \ -{ \ - .trans_reg = TPS80031_##_id##_CFG_TRANS, \ - .state_reg = TPS80031_##_id##_CFG_STATE, \ - .force_reg = TPS80031_##_id##_CFG_FORCE, \ - .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \ - .volt_id = TPS80031_SLAVE_##_volt_id, \ - .preq_bit = _pbit, \ - .desc = { \ - .name = "tps80031_"#_id, \ - .id = TPS80031_REGULATOR_##_id, \ - .n_voltages = 63, \ - .ops = &tps80031_dcdc_ops, \ - .type = REGULATOR_VOLTAGE, \ - .owner = THIS_MODULE, \ - .enable_time = 500, \ - }, \ -} - -#define TPS80031_REG_LDO(_id, _preq_bit) \ -{ \ - .trans_reg = TPS80031_##_id##_CFG_TRANS, \ - .state_reg = TPS80031_##_id##_CFG_STATE, \ - .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \ - .volt_id = TPS80031_SLAVE_ID1, \ - .preq_bit = _preq_bit, \ - .desc = { \ - .owner = THIS_MODULE, \ - .name = "tps80031_"#_id, \ - .id = TPS80031_REGULATOR_##_id, \ - .ops = &tps80031_ldo_ops, \ - .type = REGULATOR_VOLTAGE, \ - .min_uV = 1000000, \ - .uV_step = 100000, \ - .linear_min_sel = 1, \ - .n_voltages = 25, \ - .vsel_reg = TPS80031_##_id##_CFG_VOLTAGE, \ - .vsel_mask = LDO_VSEL_MASK, \ - .enable_time = 500, \ - }, \ -} - -#define TPS80031_REG_FIXED(_id, max_mV, _ops, _delay, _pbit) \ -{ \ - .trans_reg = TPS80031_##_id##_CFG_TRANS, \ - .state_reg = TPS80031_##_id##_CFG_STATE, \ - .volt_id = TPS80031_SLAVE_ID1, \ - .preq_bit = _pbit, \ - .desc = { \ - .name = "tps80031_"#_id, \ - .id = TPS80031_REGULATOR_##_id, \ - .min_uV = max_mV * 1000, \ - .n_voltages = 1, \ - .ops = &_ops, \ - .type = REGULATOR_VOLTAGE, \ - .owner = THIS_MODULE, \ - .enable_time = _delay, \ - }, \ -} - -static struct tps80031_regulator_info tps80031_rinfo[TPS80031_REGULATOR_MAX] = { - TPS80031_REG_SMPS(VIO, ID0, 4), - TPS80031_REG_SMPS(SMPS1, ID0, 0), - TPS80031_REG_SMPS(SMPS2, ID0, 1), - TPS80031_REG_SMPS(SMPS3, ID1, 2), - TPS80031_REG_SMPS(SMPS4, ID1, 3), - TPS80031_REG_LDO(VANA, -1), - TPS80031_REG_LDO(LDO1, 8), - TPS80031_REG_LDO(LDO2, 9), - TPS80031_REG_LDO(LDO3, 10), - TPS80031_REG_LDO(LDO4, 11), - TPS80031_REG_LDO(LDO5, 12), - TPS80031_REG_LDO(LDO6, 13), - TPS80031_REG_LDO(LDO7, 14), - TPS80031_REG_LDO(LDOLN, 15), - TPS80031_REG_LDO(LDOUSB, 5), - TPS80031_REG_FIXED(VBUS, 5000, tps80031_vbus_hw_ops, 100000, -1), - TPS80031_REG_FIXED(REGEN1, 3300, tps80031_ext_reg_ops, 0, 16), - TPS80031_REG_FIXED(REGEN2, 3300, tps80031_ext_reg_ops, 0, 17), - TPS80031_REG_FIXED(SYSEN, 3300, tps80031_ext_reg_ops, 0, 18), -}; - -static int tps80031_power_req_config(struct device *parent, - struct tps80031_regulator *ri, - struct tps80031_regulator_platform_data *tps80031_pdata) -{ - int ret = 0; - - if (ri->rinfo->preq_bit < 0) - goto skip_pwr_req_config; - - ret = tps80031_ext_power_req_config(parent, ri->ext_ctrl_flag, - ri->rinfo->preq_bit, ri->rinfo->state_reg, - ri->rinfo->trans_reg); - if (ret < 0) { - dev_err(ri->dev, "ext powerreq config failed, err = %d\n", ret); - return ret; - } - -skip_pwr_req_config: - if (tps80031_pdata->ext_ctrl_flag & TPS80031_PWR_ON_ON_SLEEP) { - ret = tps80031_update(parent, TPS80031_SLAVE_ID1, - ri->rinfo->trans_reg, TPS80031_TRANS_SLEEP_ON, - TPS80031_TRANS_SLEEP_MASK); - if (ret < 0) { - dev_err(ri->dev, "Reg 0x%02x update failed, e %d\n", - ri->rinfo->trans_reg, ret); - return ret; - } - } - return ret; -} - -static int tps80031_regulator_config(struct device *parent, - struct tps80031_regulator *ri, - struct tps80031_regulator_platform_data *tps80031_pdata) -{ - int ret = 0; - - switch (ri->rinfo->desc.id) { - case TPS80031_REGULATOR_LDOUSB: - if (ri->config_flags & (TPS80031_USBLDO_INPUT_VSYS | - TPS80031_USBLDO_INPUT_PMID)) { - unsigned val; - - if (ri->config_flags & TPS80031_USBLDO_INPUT_VSYS) - val = MISC2_LDOUSB_IN_VSYS; - else - val = MISC2_LDOUSB_IN_PMID; - - ret = tps80031_update(parent, TPS80031_SLAVE_ID1, - TPS80031_MISC2, val, - MISC2_LDOUSB_IN_MASK); - if (ret < 0) { - dev_err(ri->dev, - "LDOUSB config failed, e= %d\n", ret); - return ret; - } - } - break; - - case TPS80031_REGULATOR_LDO3: - if (ri->config_flags & TPS80031_LDO3_OUTPUT_VIB) { - ret = tps80031_update(parent, TPS80031_SLAVE_ID1, - TPS80031_MISC2, MISC2_LDO3_SEL_VIB_VAL, - MISC2_LDO3_SEL_VIB_MASK); - if (ret < 0) { - dev_err(ri->dev, - "LDO3 config failed, e = %d\n", ret); - return ret; - } - } - break; - - case TPS80031_REGULATOR_VBUS: - /* Provide SW control Ops if VBUS is SW control */ - if (!(ri->config_flags & TPS80031_VBUS_SW_ONLY)) - ri->rinfo->desc.ops = &tps80031_vbus_sw_ops; - break; - default: - break; - } - - /* Configure Active state to ON, SLEEP to OFF and OFF_state to OFF */ - ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->trans_reg, - TPS80031_TRANS_ACTIVE_ON | TPS80031_TRANS_SLEEP_OFF | - TPS80031_TRANS_OFF_OFF, TPS80031_TRANS_ACTIVE_MASK | - TPS80031_TRANS_SLEEP_MASK | TPS80031_TRANS_OFF_MASK); - if (ret < 0) { - dev_err(ri->dev, "trans reg update failed, e %d\n", ret); - return ret; - } - - return ret; -} - -static int check_smps_mode_mult(struct device *parent, - struct tps80031_regulator *ri) -{ - int mult_offset; - int ret; - u8 smps_offset; - u8 smps_mult; - - ret = tps80031_read(parent, TPS80031_SLAVE_ID1, - TPS80031_SMPS_OFFSET, &smps_offset); - if (ret < 0) { - dev_err(parent, "Error in reading smps offset register\n"); - return ret; - } - - ret = tps80031_read(parent, TPS80031_SLAVE_ID1, - TPS80031_SMPS_MULT, &smps_mult); - if (ret < 0) { - dev_err(parent, "Error in reading smps mult register\n"); - return ret; - } - - switch (ri->rinfo->desc.id) { - case TPS80031_REGULATOR_VIO: - mult_offset = SMPS_MULTOFFSET_VIO; - break; - case TPS80031_REGULATOR_SMPS1: - mult_offset = SMPS_MULTOFFSET_SMPS1; - break; - case TPS80031_REGULATOR_SMPS2: - mult_offset = SMPS_MULTOFFSET_SMPS2; - break; - case TPS80031_REGULATOR_SMPS3: - mult_offset = SMPS_MULTOFFSET_SMPS3; - break; - case TPS80031_REGULATOR_SMPS4: - mult_offset = SMPS_MULTOFFSET_SMPS4; - break; - case TPS80031_REGULATOR_LDO2: - ri->device_flags = smps_mult & BIT(5) ? TRACK_MODE_ENABLE : 0; - /* TRACK mode the ldo2 varies from 600mV to 1300mV */ - if (ri->device_flags & TRACK_MODE_ENABLE) { - ri->rinfo->desc.min_uV = 600000; - ri->rinfo->desc.uV_step = 12500; - ri->rinfo->desc.n_voltages = 57; - ri->rinfo->desc.vsel_mask = LDO_TRACK_VSEL_MASK; - } - return 0; - default: - return 0; - } - - ri->device_flags = (smps_offset & mult_offset) ? DCDC_OFFSET_EN : 0; - ri->device_flags |= (smps_mult & mult_offset) ? DCDC_EXTENDED_EN : 0; - switch (ri->device_flags) { - case 0: - ri->rinfo->desc.min_uV = 607700; - ri->rinfo->desc.uV_step = 12660; - break; - case DCDC_OFFSET_EN: - ri->rinfo->desc.min_uV = 700000; - ri->rinfo->desc.uV_step = 12500; - break; - case DCDC_EXTENDED_EN: - ri->rinfo->desc.min_uV = 1852000; - ri->rinfo->desc.uV_step = 38600; - break; - case DCDC_OFFSET_EN | DCDC_EXTENDED_EN: - ri->rinfo->desc.min_uV = 2161000; - ri->rinfo->desc.uV_step = 38600; - break; - } - return 0; -} - -static int tps80031_regulator_probe(struct platform_device *pdev) -{ - struct tps80031_platform_data *pdata; - struct tps80031_regulator_platform_data *tps_pdata; - struct tps80031_regulator *ri; - struct tps80031_regulator *pmic; - struct regulator_dev *rdev; - struct regulator_config config = { }; - struct tps80031 *tps80031_mfd = dev_get_drvdata(pdev->dev.parent); - int ret; - int num; - - pdata = dev_get_platdata(pdev->dev.parent); - - if (!pdata) { - dev_err(&pdev->dev, "No platform data\n"); - return -EINVAL; - } - - pmic = devm_kcalloc(&pdev->dev, - TPS80031_REGULATOR_MAX, sizeof(*pmic), GFP_KERNEL); - if (!pmic) - return -ENOMEM; - - for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) { - tps_pdata = pdata->regulator_pdata[num]; - ri = &pmic[num]; - ri->rinfo = &tps80031_rinfo[num]; - ri->dev = &pdev->dev; - - check_smps_mode_mult(pdev->dev.parent, ri); - config.dev = &pdev->dev; - config.init_data = NULL; - config.driver_data = ri; - config.regmap = tps80031_mfd->regmap[ri->rinfo->volt_id]; - - if (tps_pdata) { - config.init_data = tps_pdata->reg_init_data; - ri->config_flags = tps_pdata->config_flags; - ri->ext_ctrl_flag = tps_pdata->ext_ctrl_flag; - ret = tps80031_regulator_config(pdev->dev.parent, - ri, tps_pdata); - if (ret < 0) { - dev_err(&pdev->dev, - "regulator config failed, e %d\n", ret); - return ret; - } - - ret = tps80031_power_req_config(pdev->dev.parent, - ri, tps_pdata); - if (ret < 0) { - dev_err(&pdev->dev, - "pwr_req config failed, err %d\n", ret); - return ret; - } - } - rdev = devm_regulator_register(&pdev->dev, &ri->rinfo->desc, - &config); - if (IS_ERR(rdev)) { - dev_err(&pdev->dev, - "register regulator failed %s\n", - ri->rinfo->desc.name); - return PTR_ERR(rdev); - } - } - - platform_set_drvdata(pdev, pmic); - return 0; -} - -static struct platform_driver tps80031_regulator_driver = { - .driver = { - .name = "tps80031-pmic", - }, - .probe = tps80031_regulator_probe, -}; - -static int __init tps80031_regulator_init(void) -{ - return platform_driver_register(&tps80031_regulator_driver); -} -subsys_initcall(tps80031_regulator_init); - -static void __exit tps80031_regulator_exit(void) -{ - platform_driver_unregister(&tps80031_regulator_driver); -} -module_exit(tps80031_regulator_exit); - -MODULE_ALIAS("platform:tps80031-regulator"); -MODULE_DESCRIPTION("Regulator Driver for TI TPS80031/TPS80032 PMIC"); -MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c index e75b0973e325..39a68b01fc38 100644 --- a/drivers/regulator/uniphier-regulator.c +++ b/drivers/regulator/uniphier-regulator.c @@ -199,6 +199,10 @@ static const struct of_device_id uniphier_regulator_match[] = { .compatible = "socionext,uniphier-pxs3-usb3-regulator", .data = &uniphier_pxs2_usb3_data, }, + { + .compatible = "socionext,uniphier-nx1-usb3-regulator", + .data = &uniphier_pxs2_usb3_data, + }, { /* Sentinel */ }, }; MODULE_DEVICE_TABLE(of, uniphier_regulator_match); diff --git a/drivers/regulator/vqmmc-ipq4019-regulator.c b/drivers/regulator/vqmmc-ipq4019-regulator.c index 6d5ae25d08d1..c4213f096fe5 100644 --- a/drivers/regulator/vqmmc-ipq4019-regulator.c +++ b/drivers/regulator/vqmmc-ipq4019-regulator.c @@ -48,7 +48,6 @@ static int ipq4019_regulator_probe(struct platform_device *pdev) struct regulator_init_data *init_data; struct regulator_config cfg = {}; struct regulator_dev *rdev; - struct resource *res; struct regmap *rmap; void __iomem *base; @@ -57,8 +56,7 @@ static int ipq4019_regulator_probe(struct platform_device *pdev) if (!init_data) return -EINVAL; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 926b68aa45d3..2a2f41b6df68 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -451,6 +451,47 @@ int __spi_register_driver(struct module *owner, struct spi_driver *sdrv) { sdrv->driver.owner = owner; sdrv->driver.bus = &spi_bus_type; + + /* + * For Really Good Reasons we use spi: modaliases not of: + * modaliases for DT so module autoloading won't work if we + * don't have a spi_device_id as well as a compatible string. + */ + if (sdrv->driver.of_match_table) { + const struct of_device_id *of_id; + + for (of_id = sdrv->driver.of_match_table; of_id->compatible[0]; + of_id++) { + const char *of_name; + + /* Strip off any vendor prefix */ + of_name = strnchr(of_id->compatible, + sizeof(of_id->compatible), ','); + if (of_name) + of_name++; + else + of_name = of_id->compatible; + + if (sdrv->id_table) { + const struct spi_device_id *spi_id; + + for (spi_id = sdrv->id_table; spi_id->name[0]; + spi_id++) + if (strcmp(spi_id->name, of_name) == 0) + break; + + if (spi_id->name[0]) + continue; + } else { + if (strcmp(sdrv->driver.name, of_name) == 0) + continue; + } + + pr_warn("SPI driver %s has no spi_device_id for %s\n", + sdrv->driver.name, of_id->compatible); + } + } + return driver_register(&sdrv->driver); } EXPORT_SYMBOL_GPL(__spi_register_driver); diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h index d780dbb8b423..b62e45aa1dd3 100644 --- a/include/linux/regulator/lp872x.h +++ b/include/linux/regulator/lp872x.h @@ -10,7 +10,7 @@ #include <linux/regulator/machine.h> #include <linux/platform_device.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #define LP872X_MAX_REGULATORS 9 @@ -40,11 +40,6 @@ enum lp872x_regulator_id { LP872X_ID_MAX, }; -enum lp872x_dvs_state { - DVS_LOW = GPIOF_OUT_INIT_LOW, - DVS_HIGH = GPIOF_OUT_INIT_HIGH, -}; - enum lp872x_dvs_sel { SEL_V1, SEL_V2, @@ -52,14 +47,14 @@ enum lp872x_dvs_sel { /** * lp872x_dvs - * @gpio : gpio pin number for dvs control + * @gpio : gpio descriptor for dvs control * @vsel : dvs selector for buck v1 or buck v2 register * @init_state : initial dvs pin state */ struct lp872x_dvs { - int gpio; + struct gpio_desc *gpio; enum lp872x_dvs_sel vsel; - enum lp872x_dvs_state init_state; + enum gpiod_flags init_state; }; /** @@ -78,14 +73,14 @@ struct lp872x_regulator_data { * @update_config : if LP872X_GENERAL_CFG register is updated, set true * @regulator_data : platform regulator id and init data * @dvs : dvs data for buck voltage control - * @enable_gpio : gpio pin number for enable control + * @enable_gpio : gpio descriptor for enable control */ struct lp872x_platform_data { u8 general_config; bool update_config; struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; struct lp872x_dvs *dvs; - int enable_gpio; + struct gpio_desc *enable_gpio; }; #endif diff --git a/include/linux/regulator/tps62360.h b/include/linux/regulator/tps62360.h index 94a90c06f1e5..398e74a1d941 100644 --- a/include/linux/regulator/tps62360.h +++ b/include/linux/regulator/tps62360.h @@ -19,10 +19,6 @@ * @en_discharge: Enable discharge the output capacitor via internal * register. * @en_internal_pulldn: internal pull down enable or not. - * @vsel0_gpio: Gpio number for vsel0. It should be -1 if this is tied with - * fixed logic. - * @vsel1_gpio: Gpio number for vsel1. It should be -1 if this is tied with - * fixed logic. * @vsel0_def_state: Default state of vsel0. 1 if it is high else 0. * @vsel1_def_state: Default state of vsel1. 1 if it is high else 0. */ @@ -30,8 +26,6 @@ struct tps62360_regulator_platform_data { struct regulator_init_data *reg_init_data; bool en_discharge; bool en_internal_pulldn; - int vsel0_gpio; - int vsel1_gpio; int vsel0_def_state; int vsel1_def_state; }; |