Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of serial and tty driver updates for 6.3-rc1.

  Once again, Jiri and Ilpo have done a number of core vt and tty/serial
  layer cleanups that were much needed and appreciated. Other than that,
  it's just a bunch of little tty/serial driver updates:

   - qcom-geni-serial driver updates

   - liteuart driver updates

   - hvcs driver cleanups

   - n_gsm updates and additions for new features

   - more 8250 device support added

   - fpga/dfl update and additions

   - imx serial driver updates

   - fsl_lpuart updates

   - other tiny fixes and updates for serial drivers

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
  tty: n_gsm: add keep alive support
  serial: imx: remove a redundant check
  dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
  soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
  tty: n_gsm: add TIOCMIWAIT support
  tty: n_gsm: add RING/CD control support
  tty: n_gsm: mark unusable ioctl structure fields accordingly
  serial: imx: get rid of registers shadowing
  serial: imx: refine local variables in rxint()
  serial: imx: stop using USR2 in FIFO reading loop
  serial: imx: remove redundant USR2 read from FIFO reading loop
  serial: imx: do not break from FIFO reading loop prematurely
  serial: imx: do not sysrq broken chars
  serial: imx: work-around for hardware RX flood
  serial: imx: factor-out common code to imx_uart_soft_reset()
  serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
  serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
  serial: 8250_pci1xxxx: Add driver for quad-uart support
  serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
  tty: pcn_uart: fix memory leak with using debugfs_lookup()
  ...

60 files changed, 2414 insertions, 1102 deletions

diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index b2735be81ab2..1577eba6fe0e 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -377,8 +377,8 @@ static void async_mode(MGSLPC_INFO *info);
 
 static void tx_timeout(struct timer_list *t);
 
-static int carrier_raised(struct tty_port *port);
-static void dtr_rts(struct tty_port *port, int onoff);
+static bool carrier_raised(struct tty_port *port);
+static void dtr_rts(struct tty_port *port, bool active);
 
 #if SYNCLINK_GENERIC_HDLC
 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
@@ -1309,7 +1309,7 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
 	if (tty)
 		clear_bit(TTY_IO_ERROR, &tty->flags);
 
-	tty_port_set_initialized(&info->port, 1);
+	tty_port_set_initialized(&info->port, true);
 
 	return 0;
 }
@@ -1359,7 +1359,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
 	if (tty)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 
-	tty_port_set_initialized(&info->port, 0);
+	tty_port_set_initialized(&info->port, false);
 }
 
 static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
@@ -2430,7 +2430,7 @@ static void mgslpc_hangup(struct tty_struct *tty)
 	tty_port_hangup(&info->port);
 }
 
-static int carrier_raised(struct tty_port *port)
+static bool carrier_raised(struct tty_port *port)
 {
 	MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
 	unsigned long flags;
@@ -2439,18 +2439,16 @@ static int carrier_raised(struct tty_port *port)
 	get_signals(info);
 	spin_unlock_irqrestore(&info->lock, flags);
 
-	if (info->serial_signals & SerialSignal_DCD)
-		return 1;
-	return 0;
+	return info->serial_signals & SerialSignal_DCD;
 }
 
-static void dtr_rts(struct tty_port *port, int onoff)
+static void dtr_rts(struct tty_port *port, bool active)
 {
 	MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock, flags);
-	if (onoff)
+	if (active)
 		info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
 	else
 		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index b9aae85ba930..0a4227bc9462 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -13,6 +13,7 @@
 #include <linux/dfl.h>
 #include <linux/fpga-dfl.h>
 #include <linux/module.h>
+#include <linux/overflow.h>
 #include <linux/uaccess.h>
 
 #include "dfl.h"
@@ -342,6 +343,8 @@ static void release_dfl_dev(struct device *dev)
 	if (ddev->mmio_res.parent)
 		release_resource(&ddev->mmio_res);
 
+	kfree(ddev->params);
+
 	ida_free(&dfl_device_ida, ddev->id);
 	kfree(ddev->irqs);
 	kfree(ddev);
@@ -380,7 +383,16 @@ dfl_dev_add(struct dfl_feature_platform_data *pdata,
 	ddev->type = feature_dev_id_type(pdev);
 	ddev->feature_id = feature->id;
 	ddev->revision = feature->revision;
+	ddev->dfh_version = feature->dfh_version;
 	ddev->cdev = pdata->dfl_cdev;
+	if (feature->param_size) {
+		ddev->params = kmemdup(feature->params, feature->param_size, GFP_KERNEL);
+		if (!ddev->params) {
+			ret = -ENOMEM;
+			goto put_dev;
+		}
+		ddev->param_size = feature->param_size;
+	}
 
 	/* add mmio resource */
 	parent_res = &pdev->resource[feature->resource_index];
@@ -708,20 +720,27 @@ struct build_feature_devs_info {
  * struct dfl_feature_info - sub feature info collected during feature dev build
  *
  * @fid: id of this sub feature.
+ * @revision: revision of this sub feature
+ * @dfh_version: version of Device Feature Header (DFH)
  * @mmio_res: mmio resource of this sub feature.
  * @ioaddr: mapped base address of mmio resource.
  * @node: node in sub_features linked list.
  * @irq_base: start of irq index in this sub feature.
  * @nr_irqs: number of irqs of this sub feature.
+ * @param_size: size DFH parameters.
+ * @params: DFH parameter data.
  */
 struct dfl_feature_info {
 	u16 fid;
 	u8 revision;
+	u8 dfh_version;
 	struct resource mmio_res;
 	void __iomem *ioaddr;
 	struct list_head node;
 	unsigned int irq_base;
 	unsigned int nr_irqs;
+	unsigned int param_size;
+	u64 params[];
 };
 
 static void dfl_fpga_cdev_add_port_dev(struct dfl_fpga_cdev *cdev,
@@ -797,7 +816,17 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
 		feature->dev = fdev;
 		feature->id = finfo->fid;
 		feature->revision = finfo->revision;
+		feature->dfh_version = finfo->dfh_version;
 
+		if (finfo->param_size) {
+			feature->params = devm_kmemdup(binfo->dev,
+						       finfo->params, finfo->param_size,
+						       GFP_KERNEL);
+			if (!feature->params)
+				return -ENOMEM;
+
+			feature->param_size = finfo->param_size;
+		}
 		/*
 		 * the FIU header feature has some fundamental functions (sriov
 		 * set, port enable/disable) needed for the dfl bus device and
@@ -934,56 +963,115 @@ static u16 feature_id(u64 value)
 	return 0;
 }
 
+static u64 *find_param(u64 *params, resource_size_t max, int param_id)
+{
+	u64 *end = params + max / sizeof(u64);
+	u64 v, next;
+
+	while (params < end) {
+		v = *params;
+		if (param_id == FIELD_GET(DFHv1_PARAM_HDR_ID, v))
+			return params;
+
+		if (FIELD_GET(DFHv1_PARAM_HDR_NEXT_EOP, v))
+			break;
+
+		next = FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, v);
+		params += next;
+	}
+
+	return NULL;
+}
+
+/**
+ * dfh_find_param() - find parameter block for the given parameter id
+ * @dfl_dev: dfl device
+ * @param_id: id of dfl parameter
+ * @psize: destination to store size of parameter data in bytes
+ *
+ * Return: pointer to start of parameter data, PTR_ERR otherwise.
+ */
+void *dfh_find_param(struct dfl_device *dfl_dev, int param_id, size_t *psize)
+{
+	u64 *phdr = find_param(dfl_dev->params, dfl_dev->param_size, param_id);
+
+	if (!phdr)
+		return ERR_PTR(-ENOENT);
+
+	if (psize)
+		*psize = (FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, *phdr) - 1) * sizeof(u64);
+
+	return phdr + 1;
+}
+EXPORT_SYMBOL_GPL(dfh_find_param);
+
 static int parse_feature_irqs(struct build_feature_devs_info *binfo,
-			      resource_size_t ofst, u16 fid,
-			      unsigned int *irq_base, unsigned int *nr_irqs)
+			      resource_size_t ofst, struct dfl_feature_info *finfo)
 {
 	void __iomem *base = binfo->ioaddr + ofst;
 	unsigned int i, ibase, inr = 0;
+	void *params = finfo->params;
 	enum dfl_id_type type;
+	u16 fid = finfo->fid;
 	int virq;
+	u64 *p;
 	u64 v;
 
-	type = feature_dev_id_type(binfo->feature_dev);
+	switch (finfo->dfh_version) {
+	case 0:
+		/*
+		 * DFHv0 only provides MMIO resource information for each feature
+		 * in the DFL header.  There is no generic interrupt information.
+		 * Instead, features with interrupt functionality provide
+		 * the information in feature specific registers.
+		 */
+		type = feature_dev_id_type(binfo->feature_dev);
+		if (type == PORT_ID) {
+			switch (fid) {
+			case PORT_FEATURE_ID_UINT:
+				v = readq(base + PORT_UINT_CAP);
+				ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
+				inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
+				break;
+			case PORT_FEATURE_ID_ERROR:
+				v = readq(base + PORT_ERROR_CAP);
+				ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+				break;
+			}
+		} else if (type == FME_ID) {
+			switch (fid) {
+			case FME_FEATURE_ID_GLOBAL_ERR:
+				v = readq(base + FME_ERROR_CAP);
+				ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
+				break;
+			}
+		}
+		break;
 
-	/*
-	 * Ideally DFL framework should only read info from DFL header, but
-	 * current version DFL only provides mmio resources information for
-	 * each feature in DFL Header, no field for interrupt resources.
-	 * Interrupt resource information is provided by specific mmio
-	 * registers of each private feature which supports interrupt. So in
-	 * order to parse and assign irq resources, DFL framework has to look
-	 * into specific capability registers of these private features.
-	 *
-	 * Once future DFL version supports generic interrupt resource
-	 * information in common DFL headers, the generic interrupt parsing
-	 * code will be added. But in order to be compatible to old version
-	 * DFL, the driver may still fall back to these quirks.
-	 */
-	if (type == PORT_ID) {
-		switch (fid) {
-		case PORT_FEATURE_ID_UINT:
-			v = readq(base + PORT_UINT_CAP);
-			ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
-			inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
-			break;
-		case PORT_FEATURE_ID_ERROR:
-			v = readq(base + PORT_ERROR_CAP);
-			ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
-			inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+	case 1:
+		/*
+		 * DFHv1 provides interrupt resource information in DFHv1
+		 * parameter blocks.
+		 */
+		p = find_param(params, finfo->param_size, DFHv1_PARAM_ID_MSI_X);
+		if (!p)
 			break;
-		}
-	} else if (type == FME_ID) {
-		if (fid == FME_FEATURE_ID_GLOBAL_ERR) {
-			v = readq(base + FME_ERROR_CAP);
-			ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
-			inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
-		}
+
+		p++;
+		ibase = FIELD_GET(DFHv1_PARAM_MSI_X_STARTV, *p);
+		inr = FIELD_GET(DFHv1_PARAM_MSI_X_NUMV, *p);
+		break;
+
+	default:
+		dev_warn(binfo->dev, "unexpected DFH version %d\n", finfo->dfh_version);
+		break;
 	}
 
 	if (!inr) {
-		*irq_base = 0;
-		*nr_irqs = 0;
+		finfo->irq_base = 0;
+		finfo->nr_irqs = 0;
 		return 0;
 	}
 
@@ -1006,12 +1094,37 @@ static int parse_feature_irqs(struct build_feature_devs_info *binfo,
 		}
 	}
 
-	*irq_base = ibase;
-	*nr_irqs = inr;
+	finfo->irq_base = ibase;
+	finfo->nr_irqs = inr;
 
 	return 0;
 }
 
+static int dfh_get_param_size(void __iomem *dfh_base, resource_size_t max)
+{
+	int size = 0;
+	u64 v, next;
+
+	if (!FIELD_GET(DFHv1_CSR_SIZE_GRP_HAS_PARAMS,
+		       readq(dfh_base + DFHv1_CSR_SIZE_GRP)))
+		return 0;
+
+	while (size + DFHv1_PARAM_HDR < max) {
+		v = readq(dfh_base + DFHv1_PARAM_HDR + size);
+
+		next = FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, v);
+		if (!next)
+			return -EINVAL;
+
+		size += next * sizeof(u64);
+
+		if (FIELD_GET(DFHv1_PARAM_HDR_NEXT_EOP, v))
+			return size;
+	}
+
+	return -ENOENT;
+}
+
 /*
  * when create sub feature instances, for private features, it doesn't need
  * to provide resource size and feature id as they could be read from DFH
@@ -1023,39 +1136,69 @@ static int
 create_feature_instance(struct build_feature_devs_info *binfo,
 			resource_size_t ofst, resource_size_t size, u16 fid)
 {
-	unsigned int irq_base, nr_irqs;
 	struct dfl_feature_info *finfo;
+	resource_size_t start, end;
+	int dfh_psize = 0;
 	u8 revision = 0;
+	u64 v, addr_off;
+	u8 dfh_ver = 0;
 	int ret;
-	u64 v;
 
 	if (fid != FEATURE_ID_AFU) {
 		v = readq(binfo->ioaddr + ofst);
 		revision = FIELD_GET(DFH_REVISION, v);
-
+		dfh_ver = FIELD_GET(DFH_VERSION, v);
 		/* read feature size and id if inputs are invalid */
 		size = size ? size : feature_size(v);
 		fid = fid ? fid : feature_id(v);
+		if (dfh_ver == 1) {
+			dfh_psize = dfh_get_param_size(binfo->ioaddr + ofst, size);
+			if (dfh_psize < 0) {
+				dev_err(binfo->dev,
+					"failed to read size of DFHv1 parameters %d\n",
+					dfh_psize);
+				return dfh_psize;
+			}
+			dev_dbg(binfo->dev, "dfhv1_psize %d\n", dfh_psize);
+		}
 	}
 
 	if (binfo->len - ofst < size)
 		return -EINVAL;
 
-	ret = parse_feature_irqs(binfo, ofst, fid, &irq_base, &nr_irqs);
-	if (ret)
-		return ret;
-
-	finfo = kzalloc(sizeof(*finfo), GFP_KERNEL);
+	finfo = kzalloc(struct_size(finfo, params, dfh_psize / sizeof(u64)), GFP_KERNEL);
 	if (!finfo)
 		return -ENOMEM;
 
+	memcpy_fromio(finfo->params, binfo->ioaddr + ofst + DFHv1_PARAM_HDR, dfh_psize);
+	finfo->param_size = dfh_psize;
+
 	finfo->fid = fid;
 	finfo->revision = revision;
-	finfo->mmio_res.start = binfo->start + ofst;
-	finfo->mmio_res.end = finfo->mmio_res.start + size - 1;
+	finfo->dfh_version = dfh_ver;
+	if (dfh_ver == 1) {
+		v = readq(binfo->ioaddr + ofst + DFHv1_CSR_ADDR);
+		addr_off = FIELD_GET(DFHv1_CSR_ADDR_MASK, v);
+		if (FIELD_GET(DFHv1_CSR_ADDR_REL, v))
+			start = addr_off << 1;
+		else
+			start = binfo->start + ofst + addr_off;
+
+		v = readq(binfo->ioaddr + ofst + DFHv1_CSR_SIZE_GRP);
+		end = start + FIELD_GET(DFHv1_CSR_SIZE_GRP_SIZE, v) - 1;
+	} else {
+		start = binfo->start + ofst;
+		end = start + size - 1;
+	}
 	finfo->mmio_res.flags = IORESOURCE_MEM;
-	finfo->irq_base = irq_base;
-	finfo->nr_irqs = nr_irqs;
+	finfo->mmio_res.start = start;
+	finfo->mmio_res.end = end;
+
+	ret = parse_feature_irqs(binfo, ofst, finfo);
+	if (ret) {
+		kfree(finfo);
+		return ret;
+	}
 
 	list_add_tail(&finfo->node, &binfo->sub_features);
 	binfo->feature_num++;
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index 06cfcd5e84bb..20eaddce6988 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -74,11 +74,47 @@
 #define DFH_REVISION		GENMASK_ULL(15, 12)	/* Feature revision */
 #define DFH_NEXT_HDR_OFST	GENMASK_ULL(39, 16)	/* Offset to next DFH */
 #define DFH_EOL			BIT_ULL(40)		/* End of list */
+#define DFH_VERSION		GENMASK_ULL(59, 52)	/* DFH version */
 #define DFH_TYPE		GENMASK_ULL(63, 60)	/* Feature type */
 #define DFH_TYPE_AFU		1
 #define DFH_TYPE_PRIVATE	3
 #define DFH_TYPE_FIU		4
 
+/*
+ * DFHv1 Register Offset definitons
+ * In DHFv1, DFH + GUID + CSR_START + CSR_SIZE_GROUP + PARAM_HDR + PARAM_DATA
+ * as common header registers
+ */
+#define DFHv1_CSR_ADDR		0x18  /* CSR Register start address */
+#define DFHv1_CSR_SIZE_GRP	0x20  /* Size of Reg Block and Group/tag */
+#define DFHv1_PARAM_HDR		0x28  /* Optional First Param header */
+
+/*
+ * CSR Rel Bit, 1'b0 = relative (offset from feature DFH start),
+ * 1'b1 = absolute (ARM or other non-PCIe use)
+ */
+#define DFHv1_CSR_ADDR_REL	BIT_ULL(0)
+
+/* CSR Header Register Bit Definitions */
+#define DFHv1_CSR_ADDR_MASK       GENMASK_ULL(63, 1)  /* 63:1 of CSR address */
+
+/* CSR SIZE Goup Register Bit Definitions */
+#define DFHv1_CSR_SIZE_GRP_INSTANCE_ID	GENMASK_ULL(15, 0)	/* Enumeration instantiated IP */
+#define DFHv1_CSR_SIZE_GRP_GROUPING_ID	GENMASK_ULL(30, 16)	/* Group Features/interfaces */
+#define DFHv1_CSR_SIZE_GRP_HAS_PARAMS	BIT_ULL(31)		/* Presence of Parameters */
+#define DFHv1_CSR_SIZE_GRP_SIZE		GENMASK_ULL(63, 32)	/* Size of CSR Block in bytes */
+
+/* PARAM Header Register Bit Definitions */
+#define DFHv1_PARAM_HDR_ID		GENMASK_ULL(15, 0) /* Id of this Param  */
+#define DFHv1_PARAM_HDR_VER		GENMASK_ULL(31, 16) /* Version Param */
+#define DFHv1_PARAM_HDR_NEXT_OFFSET	GENMASK_ULL(63, 35) /* Offset of next Param */
+#define DFHv1_PARAM_HDR_NEXT_EOP	BIT_ULL(32)
+#define DFHv1_PARAM_DATA		0x08  /* Offset of Param data from Param header */
+
+#define DFHv1_PARAM_ID_MSI_X		0x1
+#define DFHv1_PARAM_MSI_X_NUMV		GENMASK_ULL(63, 32)
+#define DFHv1_PARAM_MSI_X_STARTV	GENMASK_ULL(31, 0)
+
 /* Next AFU Register Bitfield */
 #define NEXT_AFU_NEXT_DFH_OFST	GENMASK_ULL(23, 0)	/* Offset to next AFU */
 
@@ -231,6 +267,7 @@ struct dfl_feature_irq_ctx {
  *
  * @dev: ptr to pdev of the feature device which has the sub feature.
  * @id: sub feature id.
+ * @revision: revisition of the instance of a feature.
  * @resource_index: each sub feature has one mmio resource for its registers.
  *		    this index is used to find its mmio resource from the
  *		    feature dev (platform device)'s resources.
@@ -240,6 +277,9 @@ struct dfl_feature_irq_ctx {
  * @ops: ops of this sub feature.
  * @ddev: ptr to the dfl device of this sub feature.
  * @priv: priv data of this feature.
+ * @dfh_version: version of the DFH
+ * @param_size: size of dfh parameters
+ * @params: point to memory copy of dfh parameters
  */
 struct dfl_feature {
 	struct platform_device *dev;
@@ -252,6 +292,9 @@ struct dfl_feature {
 	const struct dfl_feature_ops *ops;
 	struct dfl_device *ddev;
 	void *priv;
+	u8 dfh_version;
+	unsigned int param_size;
+	void *params;
 };
 
 #define FEATURE_DEV_ID_UNUSED	(-1)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index fd70794bfcee..80d586b0be7a 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -14,7 +14,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/qcom-geni-se.h>
+#include <linux/soc/qcom/geni-se.h>
 #include <linux/spinlock.h>
 
 #define SE_I2C_TX_TRANS_LEN		0x26c
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
index fc00274070b6..103fce0c49e6 100644
--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -647,7 +647,7 @@ static void ipoctal_hangup(struct tty_struct *tty)
 	tty_port_hangup(&channel->tty_port);
 
 	ipoctal_reset_channel(channel);
-	tty_port_set_initialized(&channel->tty_port, 0);
+	tty_port_set_initialized(&channel->tty_port, false);
 	wake_up_interruptible(&channel->tty_port.open_wait);
 }
 
@@ -659,7 +659,7 @@ static void ipoctal_shutdown(struct tty_struct *tty)
 		return;
 
 	ipoctal_reset_channel(channel);
-	tty_port_set_initialized(&channel->tty_port, 0);
+	tty_port_set_initialized(&channel->tty_port, false);
 }
 
 static void ipoctal_cleanup(struct tty_struct *tty)
diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c
index ae7ef2e038be..50536fe59f1a 100644
--- a/drivers/mmc/core/sdio_uart.c
+++ b/drivers/mmc/core/sdio_uart.c
@@ -526,7 +526,7 @@ static void sdio_uart_irq(struct sdio_func *func)
 	port->in_sdio_uart_irq = NULL;
 }
 
-static int uart_carrier_raised(struct tty_port *tport)
+static bool uart_carrier_raised(struct tty_port *tport)
 {
 	struct sdio_uart_port *port =
 			container_of(tport, struct sdio_uart_port, port);
@@ -535,28 +535,27 @@ static int uart_carrier_raised(struct tty_port *tport)
 		return 1;
 	ret = sdio_uart_get_mctrl(port);
 	sdio_uart_release_func(port);
-	if (ret & TIOCM_CAR)
-		return 1;
-	return 0;
+
+	return ret & TIOCM_CAR;
 }
 
 /**
  *	uart_dtr_rts		-	 port helper to set uart signals
  *	@tport: tty port to be updated
- *	@onoff: set to turn on DTR/RTS
+ *	@active: set to turn on DTR/RTS
  *
  *	Called by the tty port helpers when the modem signals need to be
  *	adjusted during an open, close and hangup.
  */
 
-static void uart_dtr_rts(struct tty_port *tport, int onoff)
+static void uart_dtr_rts(struct tty_port *tport, bool active)
 {
 	struct sdio_uart_port *port =
 			container_of(tport, struct sdio_uart_port, port);
 	int ret = sdio_uart_claim_func(port);
 	if (ret)
 		return;
-	if (onoff == 0)
+	if (!active)
 		sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	else
 		sdio_uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c
index d73c4c2ed4e1..443d6bae19d1 100644
--- a/drivers/pps/clients/pps-ldisc.c
+++ b/drivers/pps/clients/pps-ldisc.c
@@ -13,7 +13,7 @@
 #include <linux/pps_kernel.h>
 #include <linux/bug.h>
 
-static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status)
+static void pps_tty_dcd_change(struct tty_struct *tty, bool active)
 {
 	struct pps_device *pps;
 	struct pps_event_time ts;
@@ -29,11 +29,11 @@ static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status)
 		return;
 
 	/* Now do the PPS event report */
-	pps_event(pps, &ts, status ? PPS_CAPTUREASSERT :
+	pps_event(pps, &ts, active ? PPS_CAPTUREASSERT :
 			PPS_CAPTURECLEAR, NULL);
 
 	dev_dbg(pps->dev, "PPS %s at %lu\n",
-			status ? "assert" : "clear", jiffies);
+			active ? "assert" : "clear", jiffies);
 }
 
 static int (*alias_n_tty_open)(struct tty_struct *tty);
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 72ba83c1bc79..0b05cd76b7d0 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -629,7 +629,7 @@ static int raw3215_startup(struct raw3215_info *raw)
 	if (tty_port_initialized(&raw->port))
 		return 0;
 	raw->line_pos = 0;
-	tty_port_set_initialized(&raw->port, 1);
+	tty_port_set_initialized(&raw->port, true);
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 	raw3215_try_io(raw);
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -659,7 +659,7 @@ static void raw3215_shutdown(struct raw3215_info *raw)
 		spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 		remove_wait_queue(&raw->empty_wait, &wait);
 		set_current_state(TASK_RUNNING);
-		tty_port_set_initialized(&raw->port, 1);
+		tty_port_set_initialized(&raw->port, true);
 	}
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 }
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index f0475b93ca73..795a2e1d59b3 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -14,7 +14,7 @@
 #include <linux/of_platform.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
-#include <linux/qcom-geni-se.h>
+#include <linux/soc/qcom/geni-se.h>
 
 /**
  * DOC: Overview
diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index e1b2e0b65779..babb039bcb43 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -12,7 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
-#include <linux/qcom-geni-se.h>
+#include <linux/soc/qcom/geni-se.h>
 #include <linux/spi/spi.h>
 #include <linux/spinlock.h>
 
diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index 90ff07f2cbf7..20a34599859f 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -701,7 +701,7 @@ static int gb_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
 	return -ENOIOCTLCMD;
 }
 
-static void gb_tty_dtr_rts(struct tty_port *port, int on)
+static void gb_tty_dtr_rts(struct tty_port *port, bool active)
 {
 	struct gb_tty *gb_tty;
 	u8 newctrl;
@@ -709,7 +709,7 @@ static void gb_tty_dtr_rts(struct tty_port *port, int on)
 	gb_tty = container_of(port, struct gb_tty, port);
 	newctrl = gb_tty->ctrlout;
 
-	if (on)
+	if (active)
 		newctrl |= (GB_UART_CTRL_DTR | GB_UART_CTRL_RTS);
 	else
 		newctrl &= ~(GB_UART_CTRL_DTR | GB_UART_CTRL_RTS);
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index f52266766df9..d7515d61659e 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -502,7 +502,7 @@ static int startup(struct tty_struct *tty, struct serial_state *info)
 	 */
 	change_speed(tty, info, NULL);
 
-	tty_port_set_initialized(port, 1);
+	tty_port_set_initialized(port, true);
 	local_irq_restore(flags);
 	return 0;
 
@@ -556,7 +556,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
 
 	set_bit(TTY_IO_ERROR, &tty->flags);
 
-	tty_port_set_initialized(&info->tport, 0);
+	tty_port_set_initialized(&info->tport, false);
 	local_irq_restore(flags);
 }
 
@@ -1329,7 +1329,7 @@ static void rs_hangup(struct tty_struct *tty)
 	rs_flush_buffer(tty);
 	shutdown(tty, info);
 	info->tport.count = 0;
-	tty_port_set_active(&info->tport, 0);
+	tty_port_set_active(&info->tport, false);
 	info->tport.tty = NULL;
 	wake_up_interruptible(&info->tport.open_wait);
 }
@@ -1454,18 +1454,18 @@ static const struct tty_operations serial_ops = {
 	.proc_show = rs_proc_show,
 };
 
-static int amiga_carrier_raised(struct tty_port *port)
+static bool amiga_carrier_raised(struct tty_port *port)
 {
 	return !(ciab.pra & SER_DCD);
 }
 
-static void amiga_dtr_rts(struct tty_port *port, int raise)
+static void amiga_dtr_rts(struct tty_port *port, bool active)
 {
 	struct serial_state *info = container_of(port, struct serial_state,
 			tport);
 	unsigned long flags;
 
-	if (raise)
+	if (active)
 		info->MCR |= SER_DTR|SER_RTS;
 	else
 		info->MCR &= ~(SER_DTR|SER_RTS);
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index a683e21df19c..10c10cfdf92a 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -376,7 +376,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 		/* We are ready... raise DTR/RTS */
 		if (C_BAUD(tty))
 			if (hp->ops->dtr_rts)
-				hp->ops->dtr_rts(hp, 1);
+				hp->ops->dtr_rts(hp, true);
 		tty_port_set_initialized(&hp->port, true);
 	}
 
@@ -406,7 +406,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 
 		if (C_HUPCL(tty))
 			if (hp->ops->dtr_rts)
-				hp->ops->dtr_rts(hp, 0);
+				hp->ops->dtr_rts(hp, false);
 
 		if (hp->ops->notifier_del)
 			hp->ops->notifier_del(hp, hp->data);
diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h
index 18d005814e4b..9668f821db01 100644
--- a/drivers/tty/hvc/hvc_console.h
+++ b/drivers/tty/hvc/hvc_console.h
@@ -66,7 +66,7 @@ struct hv_ops {
 	int (*tiocmset)(struct hvc_struct *hp, unsigned int set, unsigned int clear);
 
 	/* Callbacks to handle tty ports */
-	void (*dtr_rts)(struct hvc_struct *hp, int raise);
+	void (*dtr_rts)(struct hvc_struct *hp, bool active);
 };
 
 /* Register a vterm and a slot index for use as a console (console_init) */
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index 7d49a872de48..543f35ddf523 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -658,13 +658,13 @@ static void hvc_iucv_notifier_hangup(struct hvc_struct *hp, int id)
 /**
  * hvc_iucv_dtr_rts() - HVC notifier for handling DTR/RTS
  * @hp:		Pointer the HVC device (struct hvc_struct)
- * @raise:	Non-zero to raise or zero to lower DTR/RTS lines
+ * @active:	True to raise or false to lower DTR/RTS lines
  *
  * This routine notifies the HVC back-end to raise or lower DTR/RTS
  * lines.  Raising DTR/RTS is ignored.  Lowering DTR/RTS indicates to
  * drop the IUCV connection (similar to hang up the modem).
  */
-static void hvc_iucv_dtr_rts(struct hvc_struct *hp, int raise)
+static void hvc_iucv_dtr_rts(struct hvc_struct *hp, bool active)
 {
 	struct hvc_iucv_private *priv;
 	struct iucv_path        *path;
@@ -672,7 +672,7 @@ static void hvc_iucv_dtr_rts(struct hvc_struct *hp, int raise)
 	/* Raising the DTR/RTS is ignored as IUCV connections can be
 	 * established at any times.
 	 */
-	if (raise)
+	if (active)
 		return;
 
 	priv = hvc_iucv_get_private(hp->vtermno);
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 4ba24963685e..1de1a09bf82d 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -52,6 +52,7 @@
 
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/kref.h>
@@ -285,6 +286,7 @@ struct hvcs_struct {
 	char p_location_code[HVCS_CLC_LENGTH + 1]; /* CLC + Null Term */
 	struct list_head next; /* list management */
 	struct vio_dev *vdev;
+	struct completion *destroyed;
 };
 
 static LIST_HEAD(hvcs_structs);
@@ -432,7 +434,7 @@ static ssize_t hvcs_index_show(struct device *dev, struct device_attribute *attr
 
 static DEVICE_ATTR(index, S_IRUGO, hvcs_index_show, NULL);
 
-static struct attribute *hvcs_attrs[] = {
+static struct attribute *hvcs_dev_attrs[] = {
 	&dev_attr_partner_vtys.attr,
 	&dev_attr_partner_clcs.attr,
 	&dev_attr_current_vty.attr,
@@ -441,9 +443,7 @@ static struct attribute *hvcs_attrs[] = {
 	NULL,
 };
 
-static struct attribute_group hvcs_attr_group = {
-	.attrs = hvcs_attrs,
-};
+ATTRIBUTE_GROUPS(hvcs_dev);
 
 static ssize_t rescan_show(struct device_driver *ddp, char *buf)
 {
@@ -468,6 +468,13 @@ static ssize_t rescan_store(struct device_driver *ddp, const char * buf,
 
 static DRIVER_ATTR_RW(rescan);
 
+static struct attribute *hvcs_attrs[] = {
+	&driver_attr_rescan.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(hvcs);
+
 static void hvcs_kick(void)
 {
 	hvcs_kicked = 1;
@@ -658,11 +665,13 @@ static void hvcs_destruct_port(struct tty_port *p)
 {
 	struct hvcs_struct *hvcsd = container_of(p, struct hvcs_struct, port);
 	struct vio_dev *vdev;
+	struct completion *comp;
 	unsigned long flags;
 
 	spin_lock(&hvcs_structs_lock);
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
+	comp = hvcsd->destroyed;
 	/* the list_del poisons the pointers */
 	list_del(&(hvcsd->next));
 
@@ -682,15 +691,16 @@ static void hvcs_destruct_port(struct tty_port *p)
 
 	hvcsd->p_unit_address = 0;
 	hvcsd->p_partition_ID = 0;
+	hvcsd->destroyed = NULL;
 	hvcs_return_index(hvcsd->index);
 	memset(&hvcsd->p_location_code[0], 0x00, HVCS_CLC_LENGTH + 1);
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 	spin_unlock(&hvcs_structs_lock);
 
-	sysfs_remove_group(&vdev->dev.kobj, &hvcs_attr_group);
-
 	kfree(hvcsd);
+	if (comp)
+		complete(comp);
 }
 
 static const struct tty_port_operations hvcs_port_ops = {
@@ -721,7 +731,6 @@ static int hvcs_probe(
 {
 	struct hvcs_struct *hvcsd;
 	int index, rc;
-	int retval;
 
 	if (!dev || !id) {
 		printk(KERN_ERR "HVCS: probed with invalid parameter.\n");
@@ -778,13 +787,6 @@ static int hvcs_probe(
 	list_add_tail(&(hvcsd->next), &hvcs_structs);
 	spin_unlock(&hvcs_structs_lock);
 
-	retval = sysfs_create_group(&dev->dev.kobj, &hvcs_attr_group);
-	if (retval) {
-		printk(KERN_ERR "HVCS: Can't create sysfs attrs for vty-server@%X\n",
-		       hvcsd->vdev->unit_address);
-		return retval;
-	}
-
 	printk(KERN_INFO "HVCS: vty-server@%X added to the vio bus.\n", dev->unit_address);
 
 	/*
@@ -797,6 +799,7 @@ static int hvcs_probe(
 static void hvcs_remove(struct vio_dev *dev)
 {
 	struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev);
+	DECLARE_COMPLETION_ONSTACK(comp);
 	unsigned long flags;
 	struct tty_struct *tty;
 
@@ -804,24 +807,22 @@ static void hvcs_remove(struct vio_dev *dev)
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
-	tty = hvcsd->port.tty;
+	hvcsd->destroyed = &comp;
+	tty = tty_port_tty_get(&hvcsd->port);
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
 	/*
-	 * Let the last holder of this object cause it to be removed, which
-	 * would probably be tty_hangup below.
-	 */
-	tty_port_put(&hvcsd->port);
-
-	/*
-	 * The hangup is a scheduled function which will auto chain call
-	 * hvcs_hangup.  The tty should always be valid at this time unless a
+	 * The tty should always be valid at this time unless a
 	 * simultaneous tty close already cleaned up the hvcs_struct.
 	 */
-	if (tty)
-		tty_hangup(tty);
+	if (tty) {
+		tty_vhangup(tty);
+		tty_kref_put(tty);
+	}
 
+	tty_port_put(&hvcsd->port);
+	wait_for_completion(&comp);
 	printk(KERN_INFO "HVCS: vty-server@%X removed from the"
 			" vio bus.\n", dev->unit_address);
 };
@@ -831,6 +832,10 @@ static struct vio_driver hvcs_vio_driver = {
 	.probe		= hvcs_probe,
 	.remove		= hvcs_remove,
 	.name		= hvcs_driver_name,
+	.driver = {
+		.groups = hvcs_groups,
+		.dev_groups = hvcs_dev_groups,
+	},
 };
 
 /* Only called from hvcs_get_pi please */
@@ -1171,7 +1176,10 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 	hvcsd = tty->driver_data;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	if (--hvcsd->port.count == 0) {
+	if (hvcsd->port.count == 0) {
+		spin_unlock_irqrestore(&hvcsd->lock, flags);
+		return;
+	} else if (--hvcsd->port.count == 0) {
 
 		vio_disable_interrupts(hvcsd->vdev);
 
@@ -1215,12 +1223,9 @@ static void hvcs_hangup(struct tty_struct * tty)
 {
 	struct hvcs_struct *hvcsd = tty->driver_data;
 	unsigned long flags;
-	int temp_open_count;
 	int irq;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	/* Preserve this so that we know how many kref refs to put */
-	temp_open_count = hvcsd->port.count;
 
 	/*
 	 * Don't kref put inside the spinlock because the destruction
@@ -1230,11 +1235,7 @@ static void hvcs_hangup(struct tty_struct * tty)
 	vio_disable_interrupts(hvcsd->vdev);
 
 	hvcsd->todo_mask = 0;
-
-	/* I don't think the tty needs the hvcs_struct pointer after a hangup */
-	tty->driver_data = NULL;
 	hvcsd->port.tty = NULL;
-
 	hvcsd->port.count = 0;
 
 	/* This will drop any buffered data on the floor which is OK in a hangup
@@ -1247,21 +1248,6 @@ static void hvcs_hangup(struct tty_struct * tty)
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
 	free_irq(irq, hvcsd);
-
-	/*
-	 * We need to kref_put() for every open_count we have since the
-	 * tty_hangup() function doesn't invoke a close per open connection on a
-	 * non-console device.
-	 */
-	while(temp_open_count) {
-		--temp_open_count;
-		/*
-		 * The final put will trigger destruction of the hvcs_struct.
-		 * NOTE:  If this hangup was signaled from user space then the
-		 * final put will never happen.
-		 */
-		tty_port_put(&hvcsd->port);
-	}
 }
 
 /*
@@ -1525,13 +1511,6 @@ static int __init hvcs_module_init(void)
 
 	pr_info("HVCS: Driver registered.\n");
 
-	/* This needs to be done AFTER the vio_register_driver() call or else
-	 * the kobjects won't be initialized properly.
-	 */
-	rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan);
-	if (rc)
-		pr_warn("HVCS: Failed to create rescan file (err %d)\n", rc);
-
 	return 0;
 }
 
@@ -1556,8 +1535,6 @@ static void __exit hvcs_module_exit(void)
 	hvcs_pi_buff = NULL;
 	spin_unlock(&hvcs_pi_lock);
 
-	driver_remove_file(&hvcs_vio_driver.driver, &driver_attr_rescan);
-
 	tty_unregister_driver(hvcs_tty_driver);
 
 	hvcs_free_index_list();
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 35b6fddf0341..42fa4c878b2e 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -501,16 +501,16 @@ static int moxa_tiocmset(struct tty_struct *tty,
 static void moxa_poll(struct timer_list *);
 static void moxa_set_tty_param(struct tty_struct *, const struct ktermios *);
 static void moxa_shutdown(struct tty_port *);
-static int moxa_carrier_raised(struct tty_port *);
-static void moxa_dtr_rts(struct tty_port *, int);
+static bool moxa_carrier_raised(struct tty_port *);
+static void moxa_dtr_rts(struct tty_port *, bool);
 /*
  * moxa board interface functions:
  */
 static void MoxaPortEnable(struct moxa_port *);
 static void MoxaPortDisable(struct moxa_port *);
 static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
-static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
-static void MoxaPortLineCtrl(struct moxa_port *, int, int);
+static int MoxaPortGetLineOut(struct moxa_port *, bool *, bool *);
+static void MoxaPortLineCtrl(struct moxa_port *, bool, bool);
 static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
 static int MoxaPortLineStatus(struct moxa_port *);
 static void MoxaPortFlushData(struct moxa_port *, int);
@@ -1432,7 +1432,7 @@ static void moxa_shutdown(struct tty_port *port)
 	MoxaPortFlushData(ch, 2);
 }
 
-static int moxa_carrier_raised(struct tty_port *port)
+static bool moxa_carrier_raised(struct tty_port *port)
 {
 	struct moxa_port *ch = container_of(port, struct moxa_port, port);
 	int dcd;
@@ -1443,10 +1443,10 @@ static int moxa_carrier_raised(struct tty_port *port)
 	return dcd;
 }
 
-static void moxa_dtr_rts(struct tty_port *port, int onoff)
+static void moxa_dtr_rts(struct tty_port *port, bool active)
 {
 	struct moxa_port *ch = container_of(port, struct moxa_port, port);
-	MoxaPortLineCtrl(ch, onoff, onoff);
+	MoxaPortLineCtrl(ch, active, active);
 }
 
 
@@ -1481,10 +1481,10 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
 	if (!tty_port_initialized(&ch->port)) {
 		ch->statusflags = 0;
 		moxa_set_tty_param(tty, &tty->termios);
-		MoxaPortLineCtrl(ch, 1, 1);
+		MoxaPortLineCtrl(ch, true, true);
 		MoxaPortEnable(ch);
 		MoxaSetFifo(ch, ch->type == PORT_16550A);
-		tty_port_set_initialized(&ch->port, 1);
+		tty_port_set_initialized(&ch->port, true);
 	}
 	mutex_unlock(&ch->port.mutex);
 	mutex_unlock(&moxa_openlock);
@@ -1557,19 +1557,21 @@ static unsigned int moxa_chars_in_buffer(struct tty_struct *tty)
 static int moxa_tiocmget(struct tty_struct *tty)
 {
 	struct moxa_port *ch = tty->driver_data;
-	int flag = 0, dtr, rts;
+	bool dtr_active, rts_active;
+	int flag = 0;
+	int status;
 
-	MoxaPortGetLineOut(ch, &dtr, &rts);
-	if (dtr)
+	MoxaPortGetLineOut(ch, &dtr_active, &rts_active);
+	if (dtr_active)
 		flag |= TIOCM_DTR;
-	if (rts)
+	if (rts_active)
 		flag |= TIOCM_RTS;
-	dtr = MoxaPortLineStatus(ch);
-	if (dtr & 1)
+	status = MoxaPortLineStatus(ch);
+	if (status & 1)
 		flag |= TIOCM_CTS;
-	if (dtr & 2)
+	if (status & 2)
 		flag |= TIOCM_DSR;
-	if (dtr & 4)
+	if (status & 4)
 		flag |= TIOCM_CD;
 	return flag;
 }
@@ -1577,8 +1579,8 @@ static int moxa_tiocmget(struct tty_struct *tty)
 static int moxa_tiocmset(struct tty_struct *tty,
 			 unsigned int set, unsigned int clear)
 {
+	bool dtr_active, rts_active;
 	struct moxa_port *ch;
-	int dtr, rts;
 
 	mutex_lock(&moxa_openlock);
 	ch = tty->driver_data;
@@ -1587,16 +1589,16 @@ static int moxa_tiocmset(struct tty_struct *tty,
 		return -EINVAL;
 	}
 
-	MoxaPortGetLineOut(ch, &dtr, &rts);
+	MoxaPortGetLineOut(ch, &dtr_active, &rts_active);
 	if (set & TIOCM_RTS)
-		rts = 1;
+		rts_active = true;
 	if (set & TIOCM_DTR)
-		dtr = 1;
+		dtr_active = true;
 	if (clear & TIOCM_RTS)
-		rts = 0;
+		rts_active = false;
 	if (clear & TIOCM_DTR)
-		dtr = 0;
-	MoxaPortLineCtrl(ch, dtr, rts);
+		dtr_active = false;
+	MoxaPortLineCtrl(ch, dtr_active, rts_active);
 	mutex_unlock(&moxa_openlock);
 	return 0;
 }
@@ -1664,8 +1666,8 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
 		u16 __iomem *ip)
 {
 	struct tty_struct *tty = tty_port_tty_get(&p->port);
+	bool inited = tty_port_initialized(&p->port);
 	void __iomem *ofsAddr;
-	unsigned int inited = tty_port_initialized(&p->port);
 	u16 intr;
 
 	if (tty) {
@@ -1877,12 +1879,12 @@ static void MoxaPortFlushData(struct moxa_port *port, int mode)
  *
  *      Function 13:    Get the DTR/RTS state of this port.
  *      Syntax:
- *      int  MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
+ *      int  MoxaPortGetLineOut(int port, bool *dtrState, bool *rtsState);
  *           int port           : port number (0 - 127)
- *           int * dtrState     : pointer to INT to receive the current DTR
+ *           bool * dtr_active  : pointer to bool to receive the current DTR
  *                                state. (if NULL, this function will not
  *                                write to this address)
- *           int * rtsState     : pointer to INT to receive the current RTS
+ *           bool * rts_active  : pointer to bool to receive the current RTS
  *                                state. (if NULL, this function will not
  *                                write to this address)
  *
@@ -1892,10 +1894,10 @@ static void MoxaPortFlushData(struct moxa_port *port, int mode)
  *
  *      Function 14:    Setting the DTR/RTS output state of this port.
  *      Syntax:
- *      void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
+ *      void MoxaPortLineCtrl(int port, bool dtrState, bool rtsState);
  *           int port           : port number (0 - 127)
- *           int dtrState       : DTR output state (0: off, 1: on)
- *           int rtsState       : RTS output state (0: off, 1: on)
+ *           bool dtr_active    : DTR output state
+ *           bool rts_active    : RTS output state
  *
  *
  *      Function 15:    Setting the flow control of this port.
@@ -2103,24 +2105,24 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
 	return baud;
 }
 
-static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
-		int *rtsState)
+static int MoxaPortGetLineOut(struct moxa_port *port, bool *dtr_active,
+		bool *rts_active)
 {
-	if (dtrState)
-		*dtrState = !!(port->lineCtrl & DTR_ON);
-	if (rtsState)
-		*rtsState = !!(port->lineCtrl & RTS_ON);
+	if (dtr_active)
+		*dtr_active = port->lineCtrl & DTR_ON;
+	if (rts_active)
+		*rts_active = port->lineCtrl & RTS_ON;
 
 	return 0;
 }
 
-static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
+static void MoxaPortLineCtrl(struct moxa_port *port, bool dtr_active, bool rts_active)
 {
 	u8 mode = 0;
 
-	if (dtr)
+	if (dtr_active)
 		mode |= DTR_ON;
-	if (rts)
+	if (rts_active)
 		mode |= RTS_ON;
 	port->lineCtrl = mode;
 	moxafunc(port->tableAddr, FC_LineControl, mode);
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 2436e0b10f9a..ef3116e87975 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -458,13 +458,14 @@ static void __mxser_stop_tx(struct mxser_port *info)
 	outb(info->IER, info->ioaddr + UART_IER);
 }
 
-static int mxser_carrier_raised(struct tty_port *port)
+static bool mxser_carrier_raised(struct tty_port *port)
 {
 	struct mxser_port *mp = container_of(port, struct mxser_port, port);
-	return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
+
+	return inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD;
 }
 
-static void mxser_dtr_rts(struct tty_port *port, int on)
+static void mxser_dtr_rts(struct tty_port *port, bool active)
 {
 	struct mxser_port *mp = container_of(port, struct mxser_port, port);
 	unsigned long flags;
@@ -472,7 +473,7 @@ static void mxser_dtr_rts(struct tty_port *port, int on)
 
 	spin_lock_irqsave(&mp->slock, flags);
 	mcr = inb(mp->ioaddr + UART_MCR);
-	if (on)
+	if (active)
 		mcr |= UART_MCR_DTR | UART_MCR_RTS;
 	else
 		mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
@@ -1063,7 +1064,7 @@ static int mxser_set_serial_info(struct tty_struct *tty,
 	} else {
 		retval = mxser_activate(port, tty);
 		if (retval == 0)
-			tty_port_set_initialized(port, 1);
+			tty_port_set_initialized(port, true);
 	}
 	mutex_unlock(&port->mutex);
 	return retval;
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 348d85c13f91..7aa05ebed8e1 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -318,6 +318,11 @@ struct gsm_mux {
 	struct gsm_control *pending_cmd;/* Our current pending command */
 	spinlock_t control_lock;	/* Protects the pending command */
 
+	/* Keep-alive */
+	struct timer_list ka_timer;	/* Keep-alive response timer */
+	u8 ka_num;			/* Keep-alive match pattern */
+	signed int ka_retries;		/* Keep-alive retry counter, -1 if not yet initialized */
+
 	/* Configuration */
 	int adaption;		/* 1 or 2 supported */
 	u8 ftype;		/* UI or UIH */
@@ -325,6 +330,7 @@ struct gsm_mux {
 	unsigned int t3;	/* Power wake-up timer in seconds. */
 	int n2;			/* Retry count */
 	u8 k;			/* Window size */
+	u32 keep_alive;		/* Control channel keep-alive in 10ms */
 
 	/* Statistics (not currently exposed) */
 	unsigned long bad_fcs;
@@ -540,6 +546,11 @@ static u8 gsm_encode_modem(const struct gsm_dlci *dlci)
 		modembits |= MDM_IC;
 	if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator)
 		modembits |= MDM_DV;
+	/* special mappings for passive side to operate as UE */
+	if (dlci->modem_tx & TIOCM_OUT1)
+		modembits |= MDM_IC;
+	if (dlci->modem_tx & TIOCM_OUT2)
+		modembits |= MDM_DV;
 	return modembits;
 }
 
@@ -1531,6 +1542,7 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
 	if (brk & 0x01)
 		tty_insert_flip_char(&dlci->port, 0, TTY_BREAK);
 	dlci->modem_rx = mlines;
+	wake_up_interruptible(&dlci->gsm->event);
 }
 
 /**
@@ -1897,11 +1909,13 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
 						const u8 *data, int clen)
 {
 	struct gsm_control *ctrl;
+	struct gsm_dlci *dlci;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gsm->control_lock, flags);
 
 	ctrl = gsm->pending_cmd;
+	dlci = gsm->dlci[0];
 	command |= 1;
 	/* Does the reply match our command */
 	if (ctrl != NULL && (command == ctrl->cmd || command == CMD_NSC)) {
@@ -1916,6 +1930,53 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
 	/* Or did we receive the PN response to our PN command */
 	} else if (command == CMD_PN) {
 		gsm_control_negotiation(gsm, 0, data, clen);
+	/* Or did we receive the TEST response to our TEST command */
+	} else if (command == CMD_TEST && clen == 1 && *data == gsm->ka_num) {
+		gsm->ka_retries = -1; /* trigger new keep-alive message */
+		if (dlci && !dlci->dead)
+			mod_timer(&gsm->ka_timer, jiffies + gsm->keep_alive * HZ / 100);
+	}
+	spin_unlock_irqrestore(&gsm->control_lock, flags);
+}
+
+/**
+ * gsm_control_keep_alive	-	check timeout or start keep-alive
+ * @t: timer contained in our gsm object
+ *
+ * Called off the keep-alive timer expiry signaling that our link
+ * partner is not responding anymore. Link will be closed.
+ * This is also called to startup our timer.
+ */
+
+static void gsm_control_keep_alive(struct timer_list *t)
+{
+	struct gsm_mux *gsm = from_timer(gsm, t, ka_timer);
+	unsigned long flags;
+
+	spin_lock_irqsave(&gsm->control_lock, flags);
+	if (gsm->ka_num && gsm->ka_retries == 0) {
+		/* Keep-alive expired -> close the link */
+		if (debug & DBG_ERRORS)
+			pr_debug("%s keep-alive timed out\n", __func__);
+		spin_unlock_irqrestore(&gsm->control_lock, flags);
+		if (gsm->dlci[0])
+			gsm_dlci_begin_close(gsm->dlci[0]);
+		return;
+	} else if (gsm->keep_alive && gsm->dlci[0] && !gsm->dlci[0]->dead) {
+		if (gsm->ka_retries > 0) {
+			/* T2 expired for keep-alive -> resend */
+			gsm->ka_retries--;
+		} else {
+			/* Start keep-alive timer */
+			gsm->ka_num++;
+			if (!gsm->ka_num)
+				gsm->ka_num++;
+			gsm->ka_retries = (signed int)gsm->n2;
+		}
+		gsm_control_command(gsm, CMD_TEST, &gsm->ka_num,
+				    sizeof(gsm->ka_num));
+		mod_timer(&gsm->ka_timer,
+			  jiffies + gsm->t2 * HZ / 100);
 	}
 	spin_unlock_irqrestore(&gsm->control_lock, flags);
 }
@@ -2059,14 +2120,16 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
 		tty_port_tty_hangup(&dlci->port, false);
 		gsm_dlci_clear_queues(dlci->gsm, dlci);
 		/* Ensure that gsmtty_open() can return. */
-		tty_port_set_initialized(&dlci->port, 0);
+		tty_port_set_initialized(&dlci->port, false);
 		wake_up_interruptible(&dlci->port.open_wait);
-	} else
+	} else {
+		del_timer(&dlci->gsm->ka_timer);
 		dlci->gsm->dead = true;
+	}
 	/* A DLCI 0 close is a MUX termination so we need to kick that
 	   back to userspace somehow */
 	gsm_dlci_data_kick(dlci);
-	wake_up(&dlci->gsm->event);
+	wake_up_all(&dlci->gsm->event);
 }
 
 /**
@@ -2078,6 +2141,8 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
 
 static void gsm_dlci_open(struct gsm_dlci *dlci)
 {
+	struct gsm_mux *gsm = dlci->gsm;
+
 	/* Note that SABM UA .. SABM UA first UA lost can mean that we go
 	   open -> open */
 	del_timer(&dlci->t1);
@@ -2087,8 +2152,15 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
 	if (debug & DBG_ERRORS)
 		pr_debug("DLCI %d goes open.\n", dlci->addr);
 	/* Send current modem state */
-	if (dlci->addr)
+	if (dlci->addr) {
 		gsm_modem_update(dlci, 0);
+	} else {
+		/* Start keep-alive control */
+		gsm->ka_num = 0;
+		gsm->ka_retries = -1;
+		mod_timer(&gsm->ka_timer,
+			  jiffies + gsm->keep_alive * HZ / 100);
+	}
 	gsm_dlci_data_kick(dlci);
 	wake_up(&dlci->gsm->event);
 }
@@ -2267,6 +2339,7 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci)
 	dlci->state = DLCI_CLOSING;
 	gsm_command(dlci->gsm, dlci->addr, DISC|PF);
 	mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+	wake_up_interruptible(&gsm->event);
 }
 
 /**
@@ -2840,6 +2913,7 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
 	/* Finish outstanding timers, making sure they are done */
 	del_timer_sync(&gsm->kick_timer);
 	del_timer_sync(&gsm->t2_timer);
+	del_timer_sync(&gsm->ka_timer);
 
 	/* Finish writing to ldisc */
 	flush_work(&gsm->tx_work);
@@ -2987,6 +3061,7 @@ static struct gsm_mux *gsm_alloc_mux(void)
 	INIT_LIST_HEAD(&gsm->tx_data_list);
 	timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
 	timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
+	timer_setup(&gsm->ka_timer, gsm_control_keep_alive, 0);
 	INIT_WORK(&gsm->tx_work, gsmld_write_task);
 	init_waitqueue_head(&gsm->event);
 	spin_lock_init(&gsm->control_lock);
@@ -3003,6 +3078,7 @@ static struct gsm_mux *gsm_alloc_mux(void)
 	gsm->mru = 64;	/* Default to encoding 1 so these should be 64 */
 	gsm->mtu = 64;
 	gsm->dead = true;	/* Avoid early tty opens */
+	gsm->keep_alive = 0;	/* Disabled */
 
 	/* Store the instance to the mux array or abort if no space is
 	 * available.
@@ -3138,6 +3214,29 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
 	return 0;
 }
 
+static void gsm_copy_config_ext_values(struct gsm_mux *gsm,
+				       struct gsm_config_ext *ce)
+{
+	memset(ce, 0, sizeof(*ce));
+	ce->keep_alive = gsm->keep_alive;
+}
+
+static int gsm_config_ext(struct gsm_mux *gsm, struct gsm_config_ext *ce)
+{
+	unsigned int i;
+
+	/*
+	 * Check that userspace doesn't put stuff in here to prevent breakages
+	 * in the future.
+	 */
+	for (i = 0; i < ARRAY_SIZE(ce->reserved); i++)
+		if (ce->reserved[i])
+			return -EINVAL;
+
+	gsm->keep_alive = ce->keep_alive;
+	return 0;
+}
+
 /**
  *	gsmld_output		-	write to link
  *	@gsm: our mux
@@ -3456,6 +3555,7 @@ static int gsmld_ioctl(struct tty_struct *tty, unsigned int cmd,
 		       unsigned long arg)
 {
 	struct gsm_config c;
+	struct gsm_config_ext ce;
 	struct gsm_mux *gsm = tty->disc_data;
 	unsigned int base;
 
@@ -3472,6 +3572,15 @@ static int gsmld_ioctl(struct tty_struct *tty, unsigned int cmd,
 	case GSMIOC_GETFIRST:
 		base = mux_num_to_base(gsm);
 		return put_user(base + 1, (__u32 __user *)arg);
+	case GSMIOC_GETCONF_EXT:
+		gsm_copy_config_ext_values(gsm, &ce);
+		if (copy_to_user((void __user *)arg, &ce, sizeof(ce)))
+			return -EFAULT;
+		return 0;
+	case GSMIOC_SETCONF_EXT:
+		if (copy_from_user(&ce, (void __user *)arg, sizeof(ce)))
+			return -EFAULT;
+		return gsm_config_ext(gsm, &ce);
 	default:
 		return n_tty_ioctl_helper(tty, cmd, arg);
 	}
@@ -3770,16 +3879,43 @@ static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk)
 	return -EPROTONOSUPPORT;
 }
 
-static int gsm_carrier_raised(struct tty_port *port)
+/**
+ * gsm_wait_modem_change - wait for modem status line change
+ * @dlci: channel
+ * @mask: modem status line bits
+ *
+ * The function returns if:
+ * - any given modem status line bit changed
+ * - the wait event function got interrupted (e.g. by a signal)
+ * - the underlying DLCI was closed
+ * - the underlying ldisc device was removed
+ */
+static int gsm_wait_modem_change(struct gsm_dlci *dlci, u32 mask)
+{
+	struct gsm_mux *gsm = dlci->gsm;
+	u32 old = dlci->modem_rx;
+	int ret;
+
+	ret = wait_event_interruptible(gsm->event, gsm->dead ||
+				       dlci->state != DLCI_OPEN ||
+				       (old ^ dlci->modem_rx) & mask);
+	if (gsm->dead)
+		return -ENODEV;
+	if (dlci->state != DLCI_OPEN)
+		return -EL2NSYNC;
+	return ret;
+}
+
+static bool gsm_carrier_raised(struct tty_port *port)
 {
 	struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
 	struct gsm_mux *gsm = dlci->gsm;
 
 	/* Not yet open so no carrier info */
 	if (dlci->state != DLCI_OPEN)
-		return 0;
+		return false;
 	if (debug & DBG_CD_ON)
-		return 1;
+		return true;
 
 	/*
 	 * Basic mode with control channel in ADM mode may not respond
@@ -3787,16 +3923,16 @@ static int gsm_carrier_raised(struct tty_port *port)
 	 */
 	if (gsm->encoding == GSM_BASIC_OPT &&
 	    gsm->dlci[0]->mode == DLCI_MODE_ADM && !dlci->modem_rx)
-		return 1;
+		return true;
 
 	return dlci->modem_rx & TIOCM_CD;
 }
 
-static void gsm_dtr_rts(struct tty_port *port, int onoff)
+static void gsm_dtr_rts(struct tty_port *port, bool active)
 {
 	struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
 	unsigned int modem_tx = dlci->modem_tx;
-	if (onoff)
+	if (active)
 		modem_tx |= TIOCM_DTR | TIOCM_RTS;
 	else
 		modem_tx &= ~(TIOCM_DTR | TIOCM_RTS);
@@ -3880,7 +4016,7 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 	dlci->modem_rx = 0;
 	/* We could in theory open and close before we wait - eg if we get
 	   a DM straight back. This is ok as that will have caused a hangup */
-	tty_port_set_initialized(port, 1);
+	tty_port_set_initialized(port, true);
 	/* Start sending off SABM messages */
 	if (gsm->initiator)
 		gsm_dlci_begin_open(dlci);
@@ -4029,6 +4165,8 @@ static int gsmtty_ioctl(struct tty_struct *tty,
 		gsm_destroy_network(dlci);
 		mutex_unlock(&dlci->mutex);
 		return 0;
+	case TIOCMIWAIT:
+		return gsm_wait_modem_change(dlci, (u32)arg);
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/tty/serial/8250/8250_dfl.c b/drivers/tty/serial/8250/8250_dfl.c
new file mode 100644
index 000000000000..6c5ff019df4b
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_dfl.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for FPGA UART
+ *
+ * Copyright (C) 2022 Intel Corporation.
+ *
+ * Authors:
+ *   Ananda Ravuri <ananda.ravuri@intel.com>
+ *   Matthew Gerlach <matthew.gerlach@linux.intel.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/dfl.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#define DFHv1_PARAM_ID_CLK_FRQ    0x2
+#define DFHv1_PARAM_ID_FIFO_LEN   0x3
+
+#define DFHv1_PARAM_ID_REG_LAYOUT	0x4
+#define DFHv1_PARAM_REG_LAYOUT_WIDTH	GENMASK_ULL(63, 32)
+#define DFHv1_PARAM_REG_LAYOUT_SHIFT	GENMASK_ULL(31, 0)
+
+struct dfl_uart {
+	int line;
+};
+
+static int dfh_get_u64_param_val(struct dfl_device *dfl_dev, int param_id, u64 *pval)
+{
+	size_t psize;
+	u64 *p;
+
+	p = dfh_find_param(dfl_dev, param_id, &psize);
+	if (IS_ERR(p))
+		return PTR_ERR(p);
+
+	if (psize != sizeof(*pval))
+		return -EINVAL;
+
+	*pval = *p;
+
+	return 0;
+}
+
+static int dfl_uart_get_params(struct dfl_device *dfl_dev, struct uart_8250_port *uart)
+{
+	struct device *dev = &dfl_dev->dev;
+	u64 fifo_len, clk_freq, reg_layout;
+	u32 reg_width;
+	int ret;
+
+	ret = dfh_get_u64_param_val(dfl_dev, DFHv1_PARAM_ID_CLK_FRQ, &clk_freq);
+	if (ret)
+		return dev_err_probe(dev, ret, "missing CLK_FRQ param\n");
+
+	uart->port.uartclk = clk_freq;
+
+	ret = dfh_get_u64_param_val(dfl_dev, DFHv1_PARAM_ID_FIFO_LEN, &fifo_len);
+	if (ret)
+		return dev_err_probe(dev, ret, "missing FIFO_LEN param\n");
+
+	switch (fifo_len) {
+	case 32:
+		uart->port.type = PORT_ALTR_16550_F32;
+		break;
+
+	case 64:
+		uart->port.type = PORT_ALTR_16550_F64;
+		break;
+
+	case 128:
+		uart->port.type = PORT_ALTR_16550_F128;
+		break;
+
+	default:
+		return dev_err_probe(dev, -EINVAL, "unsupported FIFO_LEN %llu\n", fifo_len);
+	}
+
+	ret = dfh_get_u64_param_val(dfl_dev, DFHv1_PARAM_ID_REG_LAYOUT, &reg_layout);
+	if (ret)
+		return dev_err_probe(dev, ret, "missing REG_LAYOUT param\n");
+
+	uart->port.regshift = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_SHIFT, reg_layout);
+	reg_width = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_WIDTH, reg_layout);
+	switch (reg_width) {
+	case 4:
+		uart->port.iotype = UPIO_MEM32;
+		break;
+
+	case 2:
+		uart->port.iotype = UPIO_MEM16;
+		break;
+
+	default:
+		return dev_err_probe(dev, -EINVAL, "unsupported reg-width %u\n", reg_width);
+
+	}
+
+	return 0;
+}
+
+static int dfl_uart_probe(struct dfl_device *dfl_dev)
+{
+	struct device *dev = &dfl_dev->dev;
+	struct uart_8250_port uart = { };
+	struct dfl_uart *dfluart;
+	int ret;
+
+	uart.port.flags = UPF_IOREMAP;
+	uart.port.mapbase = dfl_dev->mmio_res.start;
+	uart.port.mapsize = resource_size(&dfl_dev->mmio_res);
+
+	ret = dfl_uart_get_params(dfl_dev, &uart);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "failed uart feature walk\n");
+
+	if (dfl_dev->num_irqs == 1)
+		uart.port.irq = dfl_dev->irqs[0];
+
+	dfluart = devm_kzalloc(dev, sizeof(*dfluart), GFP_KERNEL);
+	if (!dfluart)
+		return -ENOMEM;
+
+	dfluart->line = serial8250_register_8250_port(&uart);
+	if (dfluart->line < 0)
+		return dev_err_probe(dev, dfluart->line, "unable to register 8250 port.\n");
+
+	dev_set_drvdata(dev, dfluart);
+
+	return 0;
+}
+
+static void dfl_uart_remove(struct dfl_device *dfl_dev)
+{
+	struct dfl_uart *dfluart = dev_get_drvdata(&dfl_dev->dev);
+
+	serial8250_unregister_port(dfluart->line);
+}
+
+#define FME_FEATURE_ID_UART 0x24
+
+static const struct dfl_device_id dfl_uart_ids[] = {
+	{ FME_ID, FME_FEATURE_ID_UART },
+	{ }
+};
+MODULE_DEVICE_TABLE(dfl, dfl_uart_ids);
+
+static struct dfl_driver dfl_uart_driver = {
+	.drv = {
+		.name = "dfl-uart",
+	},
+	.id_table = dfl_uart_ids,
+	.probe = dfl_uart_probe,
+	.remove = dfl_uart_remove,
+};
+module_dfl_driver(dfl_uart_driver);
+
+MODULE_DESCRIPTION("DFL Intel UART driver");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index f271becfc46c..0ebde0ab8167 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -136,11 +136,11 @@ static void __init init_port(struct earlycon_device *device)
 	unsigned char c;
 	unsigned int ier;
 
-	serial8250_early_out(port, UART_LCR, 0x3);	/* 8n1 */
+	serial8250_early_out(port, UART_LCR, UART_LCR_WLEN8);		/* 8n1 */
 	ier = serial8250_early_in(port, UART_IER);
 	serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */
 	serial8250_early_out(port, UART_FCR, 0);	/* no fifo */
-	serial8250_early_out(port, UART_MCR, 0x3);	/* DTR + RTS */
+	serial8250_early_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
 
 	if (port->uartclk) {
 		divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 8e9f247590bd..c55be6fda0ca 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -24,6 +24,7 @@
 #include <asm/io.h>
 
 #include "8250.h"
+#include "8250_pcilib.h"
 
 /*
  * init function returns:
@@ -89,28 +90,7 @@ static int
 setup_port(struct serial_private *priv, struct uart_8250_port *port,
 	   u8 bar, unsigned int offset, int regshift)
 {
-	struct pci_dev *dev = priv->dev;
-
-	if (bar >= PCI_STD_NUM_BARS)
-		return -EINVAL;
-
-	if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
-		if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
-			return -ENOMEM;
-
-		port->port.iotype = UPIO_MEM;
-		port->port.iobase = 0;
-		port->port.mapbase = pci_resource_start(dev, bar) + offset;
-		port->port.membase = pcim_iomap_table(dev)[bar] + offset;
-		port->port.regshift = regshift;
-	} else {
-		port->port.iotype = UPIO_PORT;
-		port->port.iobase = pci_resource_start(dev, bar) + offset;
-		port->port.mapbase = 0;
-		port->port.membase = NULL;
-		port->port.regshift = 0;
-	}
-	return 0;
+	return serial8250_pci_setup_port(priv->dev, port, bar, offset, regshift);
 }
 
 /*
@@ -5757,3 +5737,4 @@ module_pci_driver(serial_pci_driver);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
 MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
+MODULE_IMPORT_NS(SERIAL_8250_PCI);
diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
new file mode 100644
index 000000000000..a3b25779d921
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Probe module for 8250/16550-type MCHP PCI serial ports.
+ *
+ *  Based on drivers/tty/serial/8250/8250_pci.c,
+ *
+ *  Copyright (C) 2022 Microchip Technology Inc., All Rights Reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/units.h>
+#include <linux/tty.h>
+
+#include <asm/byteorder.h>
+
+#include "8250.h"
+#include "8250_pcilib.h"
+
+#define PCI_DEVICE_ID_EFAR_PCI12000		0xa002
+#define PCI_DEVICE_ID_EFAR_PCI11010		0xa012
+#define PCI_DEVICE_ID_EFAR_PCI11101		0xa022
+#define PCI_DEVICE_ID_EFAR_PCI11400		0xa032
+#define PCI_DEVICE_ID_EFAR_PCI11414		0xa042
+
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p	0x0001
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012	0x0002
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013	0x0003
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023	0x0004
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123	0x0005
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01	0x0006
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02	0x0007
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03	0x0008
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12	0x0009
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13	0x000a
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23	0x000b
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0	0x000c
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1	0x000d
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2	0x000e
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3	0x000f
+
+#define PCI_SUBDEVICE_ID_EFAR_PCI12000		PCI_DEVICE_ID_EFAR_PCI12000
+#define PCI_SUBDEVICE_ID_EFAR_PCI11010		PCI_DEVICE_ID_EFAR_PCI11010
+#define PCI_SUBDEVICE_ID_EFAR_PCI11101		PCI_DEVICE_ID_EFAR_PCI11101
+#define PCI_SUBDEVICE_ID_EFAR_PCI11400		PCI_DEVICE_ID_EFAR_PCI11400
+#define PCI_SUBDEVICE_ID_EFAR_PCI11414		PCI_DEVICE_ID_EFAR_PCI11414
+
+#define UART_ACTV_REG				0x11
+#define UART_BLOCK_SET_ACTIVE			BIT(0)
+
+#define UART_PCI_CTRL_REG			0x80
+#define UART_PCI_CTRL_SET_MULTIPLE_MSI		BIT(4)
+#define UART_PCI_CTRL_D3_CLK_ENABLE		BIT(0)
+
+#define ADCL_CFG_REG				0x40
+#define ADCL_CFG_POL_SEL			BIT(2)
+#define ADCL_CFG_PIN_SEL			BIT(1)
+#define ADCL_CFG_EN				BIT(0)
+
+#define UART_BIT_SAMPLE_CNT			16
+#define BAUD_CLOCK_DIV_INT_MSK			GENMASK(31, 8)
+#define ADCL_CFG_RTS_DELAY_MASK			GENMASK(11, 8)
+#define UART_CLOCK_DEFAULT			(62500 * HZ_PER_KHZ)
+
+#define UART_WAKE_REG				0x8C
+#define UART_WAKE_MASK_REG			0x90
+#define UART_WAKE_N_PIN				BIT(2)
+#define UART_WAKE_NCTS				BIT(1)
+#define UART_WAKE_INT				BIT(0)
+#define UART_WAKE_SRCS	\
+	(UART_WAKE_N_PIN | UART_WAKE_NCTS | UART_WAKE_INT)
+
+#define UART_BAUD_CLK_DIVISOR_REG		0x54
+
+#define UART_RESET_REG				0x94
+#define UART_RESET_D3_RESET_DISABLE		BIT(16)
+
+#define MAX_PORTS				4
+#define PORT_OFFSET				0x100
+
+static const int logical_to_physical_port_idx[][MAX_PORTS] = {
+	{0,  1,  2,  3}, /* PCI12000, PCI11010, PCI11101, PCI11400, PCI11414 */
+	{0,  1,  2,  3}, /* PCI4p */
+	{0,  1,  2, -1}, /* PCI3p012 */
+	{0,  1,  3, -1}, /* PCI3p013 */
+	{0,  2,  3, -1}, /* PCI3p023 */
+	{1,  2,  3, -1}, /* PCI3p123 */
+	{0,  1, -1, -1}, /* PCI2p01 */
+	{0,  2, -1, -1}, /* PCI2p02 */
+	{0,  3, -1, -1}, /* PCI2p03 */
+	{1,  2, -1, -1}, /* PCI2p12 */
+	{1,  3, -1, -1}, /* PCI2p13 */
+	{2,  3, -1, -1}, /* PCI2p23 */
+	{0, -1, -1, -1}, /* PCI1p0 */
+	{1, -1, -1, -1}, /* PCI1p1 */
+	{2, -1, -1, -1}, /* PCI1p2 */
+	{3, -1, -1, -1}, /* PCI1p3 */
+};
+
+struct pci1xxxx_8250 {
+	unsigned int nr;
+	void __iomem *membase;
+	int line[];
+};
+
+static int pci1xxxx_get_num_ports(struct pci_dev *dev)
+{
+	switch (dev->subsystem_device) {
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3:
+	case PCI_SUBDEVICE_ID_EFAR_PCI12000:
+	case PCI_SUBDEVICE_ID_EFAR_PCI11010:
+	case PCI_SUBDEVICE_ID_EFAR_PCI11101:
+	case PCI_SUBDEVICE_ID_EFAR_PCI11400:
+	default:
+		return 1;
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23:
+		return 2;
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013:
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023:
+		return 3;
+	case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p:
+	case PCI_SUBDEVICE_ID_EFAR_PCI11414:
+		return 4;
+	}
+}
+
+static unsigned int pci1xxxx_get_divisor(struct uart_port *port,
+					 unsigned int baud, unsigned int *frac)
+{
+	unsigned int quot;
+
+	/*
+	 * Calculate baud rate sampling period in nanoseconds.
+	 * Fractional part x denotes x/255 parts of a nanosecond.
+	 */
+	quot = NSEC_PER_SEC / (baud * UART_BIT_SAMPLE_CNT);
+	*frac = (NSEC_PER_SEC - quot * baud * UART_BIT_SAMPLE_CNT) *
+		  255 / UART_BIT_SAMPLE_CNT / baud;
+
+	return quot;
+}
+
+static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud,
+				 unsigned int quot, unsigned int frac)
+{
+	writel(FIELD_PREP(BAUD_CLOCK_DIV_INT_MSK, quot) | frac,
+	       port->membase + UART_BAUD_CLK_DIVISOR_REG);
+}
+
+static int pci1xxxx_rs485_config(struct uart_port *port,
+				 struct ktermios *termios,
+				 struct serial_rs485 *rs485)
+{
+	u32 delay_in_baud_periods;
+	u32 baud_period_in_ns;
+	u32 mode_cfg = 0;
+	u32 clock_div;
+
+	/*
+	 * pci1xxxx's uart hardware supports only RTS delay after
+	 * Tx and in units of bit times to a maximum of 15
+	 */
+	if (rs485->flags & SER_RS485_ENABLED) {
+		mode_cfg = ADCL_CFG_EN | ADCL_CFG_PIN_SEL;
+
+		if (!(rs485->flags & SER_RS485_RTS_ON_SEND))
+			mode_cfg |= ADCL_CFG_POL_SEL;
+
+		if (rs485->delay_rts_after_send) {
+			clock_div = readl(port->membase + UART_BAUD_CLK_DIVISOR_REG);
+			baud_period_in_ns =
+				FIELD_GET(BAUD_CLOCK_DIV_INT_MSK, clock_div) *
+				UART_BIT_SAMPLE_CNT;
+			delay_in_baud_periods =
+				rs485->delay_rts_after_send * NSEC_PER_MSEC /
+				baud_period_in_ns;
+			delay_in_baud_periods =
+				min_t(u32, delay_in_baud_periods,
+				      FIELD_MAX(ADCL_CFG_RTS_DELAY_MASK));
+			mode_cfg |= FIELD_PREP(ADCL_CFG_RTS_DELAY_MASK,
+					   delay_in_baud_periods);
+			rs485->delay_rts_after_send =
+				baud_period_in_ns * delay_in_baud_periods /
+				NSEC_PER_MSEC;
+		}
+	}
+	writel(mode_cfg, port->membase + ADCL_CFG_REG);
+	return 0;
+}
+
+static const struct serial_rs485 pci1xxxx_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
+		 SER_RS485_RTS_AFTER_SEND,
+	.delay_rts_after_send = 1,
+	/* Delay RTS before send is not supported */
+};
+
+static bool pci1xxxx_port_suspend(int line)
+{
+	struct uart_8250_port *up = serial8250_get_port(line);
+	struct uart_port *port = &up->port;
+	struct tty_port *tport = &port->state->port;
+	unsigned long flags;
+	bool ret = false;
+	u8 wakeup_mask;
+
+	mutex_lock(&tport->mutex);
+	if (port->suspended == 0 && port->dev) {
+		wakeup_mask = readb(up->port.membase + UART_WAKE_MASK_REG);
+
+		spin_lock_irqsave(&port->lock, flags);
+		port->mctrl &= ~TIOCM_OUT2;
+		port->ops->set_mctrl(port, port->mctrl);
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		ret = (wakeup_mask & UART_WAKE_SRCS) != UART_WAKE_SRCS;
+	}
+
+	writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG);
+	mutex_unlock(&tport->mutex);
+
+	return ret;
+}
+
+static void pci1xxxx_port_resume(int line)
+{
+	struct uart_8250_port *up = serial8250_get_port(line);
+	struct uart_port *port = &up->port;
+	struct tty_port *tport = &port->state->port;
+	unsigned long flags;
+
+	mutex_lock(&tport->mutex);
+	writeb(UART_BLOCK_SET_ACTIVE, port->membase + UART_ACTV_REG);
+	writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG);
+
+	if (port->suspended == 0) {
+		spin_lock_irqsave(&port->lock, flags);
+		port->mctrl |= TIOCM_OUT2;
+		port->ops->set_mctrl(port, port->mctrl);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+	mutex_unlock(&tport->mutex);
+}
+
+static int pci1xxxx_suspend(struct device *dev)
+{
+	struct pci1xxxx_8250 *priv = dev_get_drvdata(dev);
+	struct pci_dev *pcidev = to_pci_dev(dev);
+	bool wakeup = false;
+	unsigned int data;
+	void __iomem *p;
+	int i;
+
+	for (i = 0; i < priv->nr; i++) {
+		if (priv->line[i] >= 0) {
+			serial8250_suspend_port(priv->line[i]);
+			wakeup |= pci1xxxx_port_suspend(priv->line[i]);
+		}
+	}
+
+	p = pci_ioremap_bar(pcidev, 0);
+	if (!p) {
+		dev_err(dev, "remapping of bar 0 memory failed");
+		return -ENOMEM;
+	}
+
+	data = readl(p + UART_RESET_REG);
+	writel(data | UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG);
+
+	if (wakeup)
+		writeb(UART_PCI_CTRL_D3_CLK_ENABLE, p + UART_PCI_CTRL_REG);
+
+	iounmap(p);
+	device_set_wakeup_enable(dev, true);
+	pci_wake_from_d3(pcidev, true);
+
+	return 0;
+}
+
+static int pci1xxxx_resume(struct device *dev)
+{
+	struct pci1xxxx_8250 *priv = dev_get_drvdata(dev);
+	struct pci_dev *pcidev = to_pci_dev(dev);
+	unsigned int data;
+	void __iomem *p;
+	int i;
+
+	p = pci_ioremap_bar(pcidev, 0);
+	if (!p) {
+		dev_err(dev, "remapping of bar 0 memory failed");
+		return -ENOMEM;
+	}
+
+	data = readl(p + UART_RESET_REG);
+	writel(data & ~UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG);
+	iounmap(p);
+
+	for (i = 0; i < priv->nr; i++) {
+		if (priv->line[i] >= 0) {
+			pci1xxxx_port_resume(priv->line[i]);
+			serial8250_resume_port(priv->line[i]);
+		}
+	}
+
+	return 0;
+}
+
+static int pci1xxxx_setup(struct pci_dev *pdev,
+			  struct uart_8250_port *port, int port_idx)
+{
+	int ret;
+
+	port->port.flags |= UPF_FIXED_TYPE | UPF_SKIP_TEST;
+	port->port.type = PORT_MCHP16550A;
+	port->port.set_termios = serial8250_do_set_termios;
+	port->port.get_divisor = pci1xxxx_get_divisor;
+	port->port.set_divisor = pci1xxxx_set_divisor;
+	port->port.rs485_config = pci1xxxx_rs485_config;
+	port->port.rs485_supported = pci1xxxx_rs485_supported;
+
+	ret = serial8250_pci_setup_port(pdev, port, 0, PORT_OFFSET * port_idx, 0);
+	if (ret < 0)
+		return ret;
+
+	writeb(UART_BLOCK_SET_ACTIVE, port->port.membase + UART_ACTV_REG);
+	writeb(UART_WAKE_SRCS, port->port.membase + UART_WAKE_REG);
+	writeb(UART_WAKE_N_PIN, port->port.membase + UART_WAKE_MASK_REG);
+
+	return 0;
+}
+
+static unsigned int pci1xxxx_get_max_port(int subsys_dev)
+{
+	unsigned int i = MAX_PORTS;
+
+	if (subsys_dev < ARRAY_SIZE(logical_to_physical_port_idx))
+		while (i--) {
+			if (logical_to_physical_port_idx[subsys_dev][i] != -1)
+				return logical_to_physical_port_idx[subsys_dev][i] + 1;
+		}
+
+	if (subsys_dev == PCI_SUBDEVICE_ID_EFAR_PCI11414)
+		return 4;
+
+	return 1;
+}
+
+static int pci1xxxx_logical_to_physical_port_translate(int subsys_dev, int port)
+{
+	if (subsys_dev < ARRAY_SIZE(logical_to_physical_port_idx))
+		return logical_to_physical_port_idx[subsys_dev][port];
+
+	return logical_to_physical_port_idx[0][port];
+}
+
+static int pci1xxxx_serial_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *id)
+{
+	struct device *dev = &pdev->dev;
+	struct pci1xxxx_8250 *priv;
+	struct uart_8250_port uart;
+	unsigned int max_vec_reqd;
+	unsigned int nr_ports, i;
+	int num_vectors;
+	int subsys_dev;
+	int port_idx;
+	int rc;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	nr_ports = pci1xxxx_get_num_ports(pdev);
+
+	priv = devm_kzalloc(dev, struct_size(priv, line, nr_ports), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->membase = pci_ioremap_bar(pdev, 0);
+	if (!priv->membase)
+		return -ENOMEM;
+
+	pci_set_master(pdev);
+
+	priv->nr = nr_ports;
+
+	subsys_dev = pdev->subsystem_device;
+	max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
+
+	num_vectors = pci_alloc_irq_vectors(pdev, 1, max_vec_reqd, PCI_IRQ_ALL_TYPES);
+	if (num_vectors < 0) {
+		pci_iounmap(pdev, priv->membase);
+		return num_vectors;
+	}
+
+	memset(&uart, 0, sizeof(uart));
+	uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
+	uart.port.uartclk = UART_CLOCK_DEFAULT;
+	uart.port.dev = dev;
+
+	if (num_vectors == max_vec_reqd)
+		writeb(UART_PCI_CTRL_SET_MULTIPLE_MSI, priv->membase + UART_PCI_CTRL_REG);
+
+	for (i = 0; i < nr_ports; i++) {
+		priv->line[i] = -ENODEV;
+
+		port_idx = pci1xxxx_logical_to_physical_port_translate(subsys_dev, i);
+
+		if (num_vectors == max_vec_reqd)
+			uart.port.irq = pci_irq_vector(pdev, port_idx);
+		else
+			uart.port.irq = pci_irq_vector(pdev, 0);
+
+		rc = pci1xxxx_setup(pdev, &uart, port_idx);
+		if (rc) {
+			dev_warn(dev, "Failed to setup port %u\n", i);
+			continue;
+		}
+
+		priv->line[i] = serial8250_register_8250_port(&uart);
+		if (priv->line[i] < 0) {
+			dev_warn(dev,
+				"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+				uart.port.iobase, uart.port.irq, uart.port.iotype,
+				priv->line[i]);
+		}
+	}
+
+	pci_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static void pci1xxxx_serial_remove(struct pci_dev *dev)
+{
+	struct pci1xxxx_8250 *priv = pci_get_drvdata(dev);
+	unsigned int i;
+
+	for (i = 0; i < priv->nr; i++) {
+		if (priv->line[i] >= 0)
+			serial8250_unregister_port(priv->line[i]);
+	}
+
+	pci_free_irq_vectors(dev);
+	pci_iounmap(dev, priv->membase);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(pci1xxxx_pm_ops, pci1xxxx_suspend, pci1xxxx_resume);
+
+static const struct pci_device_id pci1xxxx_pci_tbl[] = {
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11010) },
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11101) },
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11400) },
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11414) },
+	{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI12000) },
+	{}
+};
+MODULE_DEVICE_TABLE(pci, pci1xxxx_pci_tbl);
+
+static struct pci_driver pci1xxxx_pci_driver = {
+	.name = "pci1xxxx serial",
+	.probe = pci1xxxx_serial_probe,
+	.remove = pci1xxxx_serial_remove,
+	.driver = {
+		.pm     = pm_sleep_ptr(&pci1xxxx_pm_ops),
+	},
+	.id_table = pci1xxxx_pci_tbl,
+};
+module_pci_driver(pci1xxxx_pci_driver);
+
+static_assert((ARRAY_SIZE(logical_to_physical_port_idx) == PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3 + 1));
+
+MODULE_IMPORT_NS(SERIAL_8250_PCI);
+MODULE_DESCRIPTION("Microchip Technology Inc. PCIe to UART module");
+MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>");
+MODULE_AUTHOR("Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/8250_pcilib.c b/drivers/tty/serial/8250/8250_pcilib.c
new file mode 100644
index 000000000000..d234e9194feb
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pcilib.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * 8250 PCI library.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ */
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include "8250.h"
+#include "8250_pcilib.h"
+
+int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port,
+		   u8 bar, unsigned int offset, int regshift)
+{
+	if (bar >= PCI_STD_NUM_BARS)
+		return -EINVAL;
+
+	if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
+		if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
+			return -ENOMEM;
+
+		port->port.iotype = UPIO_MEM;
+		port->port.iobase = 0;
+		port->port.mapbase = pci_resource_start(dev, bar) + offset;
+		port->port.membase = pcim_iomap_table(dev)[bar] + offset;
+		port->port.regshift = regshift;
+	} else {
+		port->port.iotype = UPIO_PORT;
+		port->port.iobase = pci_resource_start(dev, bar) + offset;
+		port->port.mapbase = 0;
+		port->port.membase = NULL;
+		port->port.regshift = 0;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(serial8250_pci_setup_port, SERIAL_8250_PCI);
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/8250_pcilib.h b/drivers/tty/serial/8250/8250_pcilib.h
new file mode 100644
index 000000000000..1aaf1b50ce9c
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pcilib.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * 8250 PCI library header file.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ */
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+struct uart_8250_port;
+
+int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar,
+		   unsigned int offset, int regshift);
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index beba8f38b3dc..fa43df05342b 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -313,6 +313,14 @@ static const struct serial8250_config uart_config[] = {
 		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_MCHP16550A] = {
+		.name           = "MCHP16550A",
+		.fifo_size      = 256,
+		.tx_loadsz      = 256,
+		.fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+		.rxtrig_bytes   = {2, 66, 130, 194},
+		.flags          = UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
@@ -1050,11 +1058,12 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			serial_out(up, UART_LCR, 0);
 			serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
 				   UART_FCR7_64BYTE);
-			status1 = serial_in(up, UART_IIR) >> 5;
+			status1 = serial_in(up, UART_IIR) & (UART_IIR_64BYTE_FIFO |
+							     UART_IIR_FIFO_ENABLED);
 			serial_out(up, UART_FCR, 0);
 			serial_out(up, UART_LCR, 0);
 
-			if (status1 == 7)
+			if (status1 == (UART_IIR_64BYTE_FIFO | UART_IIR_FIFO_ENABLED))
 				up->port.type = PORT_16550A_FSL64;
 			else
 				DEBUG_AUTOCONF("Motorola 8xxx DUART ");
@@ -1122,17 +1131,20 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	 */
 	serial_out(up, UART_LCR, 0);
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
-	status1 = serial_in(up, UART_IIR) >> 5;
+	status1 = serial_in(up, UART_IIR) & (UART_IIR_64BYTE_FIFO | UART_IIR_FIFO_ENABLED);
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
-	status2 = serial_in(up, UART_IIR) >> 5;
+	status2 = serial_in(up, UART_IIR) & (UART_IIR_64BYTE_FIFO | UART_IIR_FIFO_ENABLED);
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+
 	serial_out(up, UART_LCR, 0);
 
 	DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
 
-	if (status1 == 6 && status2 == 7) {
+	if (status1 == UART_IIR_FIFO_ENABLED_16550A &&
+	    status2 == (UART_IIR_64BYTE_FIFO | UART_IIR_FIFO_ENABLED_16550A)) {
 		up->port.type = PORT_16750;
 		up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
 		return;
@@ -1236,14 +1248,14 @@ static void autoconfig(struct uart_8250_port *up)
 		 * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
 		 * 16C754B) allow only to modify them if an EFR bit is set.
 		 */
-		scratch2 = serial_in(up, UART_IER) & 0x0f;
-		serial_out(up, UART_IER, 0x0F);
+		scratch2 = serial_in(up, UART_IER) & UART_IER_ALL_INTR;
+		serial_out(up, UART_IER, UART_IER_ALL_INTR);
 #ifdef __i386__
 		outb(0, 0x080);
 #endif
-		scratch3 = serial_in(up, UART_IER) & 0x0f;
+		scratch3 = serial_in(up, UART_IER) & UART_IER_ALL_INTR;
 		serial_out(up, UART_IER, scratch);
-		if (scratch2 != 0 || scratch3 != 0x0F) {
+		if (scratch2 != 0 || scratch3 != UART_IER_ALL_INTR) {
 			/*
 			 * We failed; there's nothing here
 			 */
@@ -1267,10 +1279,10 @@ static void autoconfig(struct uart_8250_port *up)
 	 * that conflicts with COM 1-4 --- we hope!
 	 */
 	if (!(port->flags & UPF_SKIP_TEST)) {
-		serial8250_out_MCR(up, UART_MCR_LOOP | 0x0A);
-		status1 = serial_in(up, UART_MSR) & 0xF0;
+		serial8250_out_MCR(up, UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);
+		status1 = serial_in(up, UART_MSR) & UART_MSR_STATUS_BITS;
 		serial8250_out_MCR(up, save_mcr);
-		if (status1 != 0x90) {
+		if (status1 != (UART_MSR_DCD | UART_MSR_CTS)) {
 			spin_unlock_irqrestore(&port->lock, flags);
 			DEBUG_AUTOCONF("LOOP test failed (%02x) ",
 				       status1);
@@ -1293,22 +1305,19 @@ static void autoconfig(struct uart_8250_port *up)
 
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
 
-	/* Assign this as it is to truncate any bits above 7.  */
-	scratch = serial_in(up, UART_IIR);
-
-	switch (scratch >> 6) {
-	case 0:
+	switch (serial_in(up, UART_IIR) & UART_IIR_FIFO_ENABLED) {
+	case UART_IIR_FIFO_ENABLED_8250:
 		autoconfig_8250(up);
 		break;
-	case 1:
-		port->type = PORT_UNKNOWN;
-		break;
-	case 2:
+	case UART_IIR_FIFO_ENABLED_16550:
 		port->type = PORT_16550;
 		break;
-	case 3:
+	case UART_IIR_FIFO_ENABLED_16550A:
 		autoconfig_16550a(up);
 		break;
+	default:
+		port->type = PORT_UNKNOWN;
+		break;
 	}
 
 #ifdef CONFIG_SERIAL_8250_RSA
@@ -1394,7 +1403,7 @@ static void autoconfig_irq(struct uart_8250_port *up)
 		serial8250_out_MCR(up,
 			UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
 	}
-	serial_out(up, UART_IER, 0x0f);	/* enable all intrs */
+	serial_out(up, UART_IER, UART_IER_ALL_INTR);
 	serial_in(up, UART_LSR);
 	serial_in(up, UART_RX);
 	serial_in(up, UART_IIR);
@@ -1511,8 +1520,6 @@ static inline void __stop_tx(struct uart_8250_port *p)
 		u16 lsr = serial_lsr_in(p);
 		u64 stop_delay = 0;
 
-		p->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
-
 		if (!(lsr & UART_LSR_THRE))
 			return;
 		/*
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index b0f62345bc84..978dc196c29b 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -129,9 +129,13 @@ config SERIAL_8250_DMA
 	  This builds DMA support that can be used with 8250/16650
 	  compatible UART controllers that support DMA signaling.
 
+config SERIAL_8250_PCILIB
+	bool
+
 config SERIAL_8250_PCI
 	tristate "8250/16550 PCI device support"
 	depends on SERIAL_8250 && PCI
+	select SERIAL_8250_PCILIB
 	default SERIAL_8250
 	help
 	  This builds standard PCI serial support. You may be able to
@@ -291,6 +295,17 @@ config SERIAL_8250_HUB6
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8250_hub6.
 
+config SERIAL_8250_PCI1XXXX
+	tristate "Microchip 8250 based serial port"
+	depends on SERIAL_8250 && PCI
+	select SERIAL_8250_PCILIB
+	default SERIAL_8250
+	help
+	 Select this option if you have a setup with Microchip PCIe
+	 Switch with serial port enabled and wish to enable 8250
+	 serial driver for the serial interface. This driver support
+	 will ensure to support baud rates upto 1.5Mpbs.
+
 #
 # Misc. options/drivers.
 #
@@ -370,6 +385,18 @@ config SERIAL_8250_FSL
 	  erratum for Freescale 16550 UARTs in the 8250 driver. It also
 	  enables support for ACPI enumeration.
 
+config SERIAL_8250_DFL
+	tristate "DFL bus driver for Altera 16550 UART"
+	depends on SERIAL_8250 && FPGA_DFL
+	help
+	  This option enables support for a Device Feature List (DFL) bus
+	  driver for the Altera 16550 UART. One or more Altera 16550 UARTs
+	  can be instantiated in a FPGA and then be discovered during
+	  enumeration of the DFL bus.
+
+	  To compile this driver as a module, chose M here: the
+	  module will be called 8250_dfl.
+
 config SERIAL_8250_DW
 	tristate "Support for Synopsys DesignWare 8250 quirks"
 	depends on SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 1615bfdde2a0..4fc2fc1f41b6 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIAL_8250)		+= 8250.o 8250_base.o
 8250_base-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o
 8250_base-$(CONFIG_SERIAL_8250_DWLIB)	+= 8250_dwlib.o
 8250_base-$(CONFIG_SERIAL_8250_FINTEK)	+= 8250_fintek.o
+8250_base-$(CONFIG_SERIAL_8250_PCILIB)	+= 8250_pcilib.o
 obj-$(CONFIG_SERIAL_8250_PARISC)	+= 8250_parisc.o
 obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
 obj-$(CONFIG_SERIAL_8250_EXAR)		+= 8250_exar.o
@@ -26,8 +27,10 @@ obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
 obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
 obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
 obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
+obj-$(CONFIG_SERIAL_8250_PCI1XXXX)	+= 8250_pci1xxxx.o
 obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o
 obj-$(CONFIG_SERIAL_8250_MEN_MCB)	+= 8250_men_mcb.o
+obj-$(CONFIG_SERIAL_8250_DFL)		+= 8250_dfl.o
 obj-$(CONFIG_SERIAL_8250_DW)		+= 8250_dw.o
 obj-$(CONFIG_SERIAL_8250_EM)		+= 8250_em.o
 obj-$(CONFIG_SERIAL_8250_IOC3)		+= 8250_ioc3.o
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index ed0672d2d0ef..625358f44419 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -73,17 +73,17 @@ config SERIAL_AMBA_PL011_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
-config SERIAL_EARLYCON_ARM_SEMIHOST
-	bool "Early console using ARM semihosting"
-	depends on ARM64 || ARM
+config SERIAL_EARLYCON_SEMIHOST
+	bool "Early console using Arm compatible semihosting"
+	depends on ARM64 || ARM || RISCV
 	select SERIAL_CORE
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
 	help
-	  Support for early debug console using ARM semihosting. This enables
-	  the console before standard serial driver is probed. This is enabled
-	  with "earlycon=smh" on the kernel command line. The console is
-	  enabled when early_param is processed.
+	  Support for early debug console using Arm compatible semihosting.
+	  This enables the console before standard serial driver is probed.
+	  This is enabled with "earlycon=smh" on the kernel command line.
+	  The console is enabled when early_param is processed.
 
 config SERIAL_EARLYCON_RISCV_SBI
 	bool "Early console using RISC-V SBI"
@@ -1507,7 +1507,7 @@ config SERIAL_MILBEAUT_USIO_CONSOLE
 config SERIAL_LITEUART
 	tristate "LiteUART serial port support"
 	depends on HAS_IOMEM
-	depends on OF || COMPILE_TEST
+	depends on OF
 	depends on LITEX || COMPILE_TEST
 	select SERIAL_CORE
 	help
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 238a9557b487..cd9afd9e3018 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -6,7 +6,7 @@
 obj-$(CONFIG_SERIAL_CORE) += serial_core.o
 
 obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
-obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
+obj-$(CONFIG_SERIAL_EARLYCON_SEMIHOST) += earlycon-semihost.o
 obj-$(CONFIG_SERIAL_EARLYCON_RISCV_SBI) += earlycon-riscv-sbi.o
 
 # These Sparc drivers have to appear before others such as 8250
diff --git a/drivers/tty/serial/earlycon-arm-semihost.c b/drivers/tty/serial/earlycon-semihost.c
index fcdec5f42376..e4692a8433f9 100644
--- a/drivers/tty/serial/earlycon-arm-semihost.c
+++ b/drivers/tty/serial/earlycon-semihost.c
@@ -11,30 +11,7 @@
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
-
-#ifdef CONFIG_THUMB2_KERNEL
-#define SEMIHOST_SWI	"0xab"
-#else
-#define SEMIHOST_SWI	"0x123456"
-#endif
-
-/*
- * Semihosting-based debug console
- */
-static void smh_putc(struct uart_port *port, unsigned char c)
-{
-#ifdef CONFIG_ARM64
-	asm volatile("mov  x1, %0\n"
-		     "mov  x0, #3\n"
-		     "hlt  0xf000\n"
-		     : : "r" (&c) : "x0", "x1", "memory");
-#else
-	asm volatile("mov  r1, %0\n"
-		     "mov  r0, #3\n"
-		     "svc  " SEMIHOST_SWI "\n"
-		     : : "r" (&c) : "r0", "r1", "memory");
-#endif
-}
+#include <asm/semihost.h>
 
 static void smh_write(struct console *con, const char *s, unsigned n)
 {
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 4f6e9bf57169..a5fbb6ed38ae 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -120,7 +120,13 @@ static int __init parse_options(struct earlycon_device *device, char *options)
 	}
 
 	if (options) {
+		char *uartclk;
+
 		device->baud = simple_strtoul(options, NULL, 0);
+		uartclk = strchr(options, ',');
+		if (uartclk && kstrtouint(uartclk + 1, 0, &port->uartclk) < 0)
+			pr_warn("[%s] unsupported earlycon uart clkrate option\n",
+				options);
 		length = min(strcspn(options, " ") + 1,
 			     (size_t)(sizeof(device->options)));
 		strscpy(device->options, options, length);
@@ -139,7 +145,8 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match)
 		buf = NULL;
 
 	spin_lock_init(&port->lock);
-	port->uartclk = BASE_BAUD * 16;
+	if (!port->uartclk)
+		port->uartclk = BASE_BAUD * 16;
 	if (port->mapbase)
 		port->membase = earlycon_map(port->mapbase, 64);
 
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 5e69fb73f570..e945f41b93d4 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -5,6 +5,8 @@
  *  Copyright 2012-2014 Freescale Semiconductor, Inc.
  */
 
+#include <linux/bitfield.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/console.h>
 #include <linux/delay.h>
@@ -181,7 +183,7 @@
 #define UARTCTRL_SBK		0x00010000
 #define UARTCTRL_MA1IE		0x00008000
 #define UARTCTRL_MA2IE		0x00004000
-#define UARTCTRL_IDLECFG	0x00000100
+#define UARTCTRL_IDLECFG	GENMASK(10, 8)
 #define UARTCTRL_LOOPS		0x00000080
 #define UARTCTRL_DOZEEN		0x00000040
 #define UARTCTRL_RSRC		0x00000020
@@ -199,6 +201,7 @@
 #define UARTDATA_MASK		0x3ff
 
 #define UARTMODIR_IREN		0x00020000
+#define UARTMODIR_RTSWATER	GENMASK(10, 8)
 #define UARTMODIR_TXCTSSRC	0x00000020
 #define UARTMODIR_TXCTSC	0x00000010
 #define UARTMODIR_RXRTSE	0x00000008
@@ -212,6 +215,7 @@
 #define UARTFIFO_RXUF		0x00010000
 #define UARTFIFO_TXFLUSH	0x00008000
 #define UARTFIFO_RXFLUSH	0x00004000
+#define UARTFIFO_RXIDEN	GENMASK(12, 10)
 #define UARTFIFO_TXOFE		0x00000200
 #define UARTFIFO_RXUFE		0x00000100
 #define UARTFIFO_TXFE		0x00000080
@@ -238,7 +242,7 @@
 
 #define DRIVER_NAME	"fsl-lpuart"
 #define DEV_NAME	"ttyLP"
-#define UART_NR		6
+#define UART_NR		8
 
 /* IMX lpuart has four extra unused regs located at the beginning */
 #define IMX_REG_OFF	0x10
@@ -248,6 +252,7 @@ enum lpuart_type {
 	LS1021A_LPUART,
 	LS1028A_LPUART,
 	IMX7ULP_LPUART,
+	IMX8ULP_LPUART,
 	IMX8QXP_LPUART,
 	IMXRT1050_LPUART,
 };
@@ -260,6 +265,7 @@ struct lpuart_port {
 	unsigned int		txfifo_size;
 	unsigned int		rxfifo_size;
 
+	u8			rx_watermark;
 	bool			lpuart_dma_tx_use;
 	bool			lpuart_dma_rx_use;
 	struct dma_chan		*dma_tx_chan;
@@ -286,38 +292,52 @@ struct lpuart_soc_data {
 	enum lpuart_type devtype;
 	char iotype;
 	u8 reg_off;
+	u8 rx_watermark;
 };
 
 static const struct lpuart_soc_data vf_data = {
 	.devtype = VF610_LPUART,
 	.iotype = UPIO_MEM,
+	.rx_watermark = 1,
 };
 
 static const struct lpuart_soc_data ls1021a_data = {
 	.devtype = LS1021A_LPUART,
 	.iotype = UPIO_MEM32BE,
+	.rx_watermark = 1,
 };
 
 static const struct lpuart_soc_data ls1028a_data = {
 	.devtype = LS1028A_LPUART,
 	.iotype = UPIO_MEM32,
+	.rx_watermark = 1,
 };
 
 static struct lpuart_soc_data imx7ulp_data = {
 	.devtype = IMX7ULP_LPUART,
 	.iotype = UPIO_MEM32,
 	.reg_off = IMX_REG_OFF,
+	.rx_watermark = 1,
+};
+
+static struct lpuart_soc_data imx8ulp_data = {
+	.devtype = IMX8ULP_LPUART,
+	.iotype = UPIO_MEM32,
+	.reg_off = IMX_REG_OFF,
+	.rx_watermark = 3,
 };
 
 static struct lpuart_soc_data imx8qxp_data = {
 	.devtype = IMX8QXP_LPUART,
 	.iotype = UPIO_MEM32,
 	.reg_off = IMX_REG_OFF,
+	.rx_watermark = 31,
 };
 static struct lpuart_soc_data imxrt1050_data = {
 	.devtype = IMXRT1050_LPUART,
 	.iotype = UPIO_MEM32,
 	.reg_off = IMX_REG_OFF,
+	.rx_watermark = 1,
 };
 
 static const struct of_device_id lpuart_dt_ids[] = {
@@ -325,6 +345,7 @@ static const struct of_device_id lpuart_dt_ids[] = {
 	{ .compatible = "fsl,ls1021a-lpuart",	.data = &ls1021a_data, },
 	{ .compatible = "fsl,ls1028a-lpuart",	.data = &ls1028a_data, },
 	{ .compatible = "fsl,imx7ulp-lpuart",	.data = &imx7ulp_data, },
+	{ .compatible = "fsl,imx8ulp-lpuart",	.data = &imx8ulp_data, },
 	{ .compatible = "fsl,imx8qxp-lpuart",	.data = &imx8qxp_data, },
 	{ .compatible = "fsl,imxrt1050-lpuart",	.data = &imxrt1050_data},
 	{ /* sentinel */ }
@@ -345,6 +366,11 @@ static inline bool is_imx7ulp_lpuart(struct lpuart_port *sport)
 	return sport->devtype == IMX7ULP_LPUART;
 }
 
+static inline bool is_imx8ulp_lpuart(struct lpuart_port *sport)
+{
+	return sport->devtype == IMX8ULP_LPUART;
+}
+
 static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport)
 {
 	return sport->devtype == IMX8QXP_LPUART;
@@ -1387,9 +1413,9 @@ static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termio
 		 * Note: UART is assumed to be active high.
 		 */
 		if (rs485->flags & SER_RS485_RTS_ON_SEND)
-			modem &= ~UARTMODEM_TXRTSPOL;
-		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
 			modem |= UARTMODEM_TXRTSPOL;
+		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+			modem &= ~UARTMODEM_TXRTSPOL;
 	}
 
 	lpuart32_write(&sport->port, modem, UARTMODIR);
@@ -1462,12 +1488,32 @@ static void lpuart_break_ctl(struct uart_port *port, int break_state)
 
 static void lpuart32_break_ctl(struct uart_port *port, int break_state)
 {
-	unsigned long temp;
+	unsigned long temp, modem;
+	struct tty_struct *tty;
+	unsigned int cflag = 0;
+
+	tty = tty_port_tty_get(&port->state->port);
+	if (tty) {
+		cflag = tty->termios.c_cflag;
+		tty_kref_put(tty);
+	}
 
 	temp = lpuart32_read(port, UARTCTRL) & ~UARTCTRL_SBK;
+	modem = lpuart32_read(port, UARTMODIR);
 
-	if (break_state != 0)
+	if (break_state != 0) {
 		temp |= UARTCTRL_SBK;
+		/*
+		 * LPUART CTS has higher priority than SBK, need to disable CTS before
+		 * asserting SBK to avoid any interference if flow control is enabled.
+		 */
+		if (cflag & CRTSCTS && modem & UARTMODIR_TXCTSE)
+			lpuart32_write(port, modem & ~UARTMODIR_TXCTSE, UARTMODIR);
+	} else {
+		/* Re-enable the CTS when break off. */
+		if (cflag & CRTSCTS && !(modem & UARTMODIR_TXCTSE))
+			lpuart32_write(port, modem | UARTMODIR_TXCTSE, UARTMODIR);
+	}
 
 	lpuart32_write(port, temp, UARTCTRL);
 }
@@ -1497,8 +1543,10 @@ static void lpuart_setup_watermark(struct lpuart_port *sport)
 		writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
 	}
 
+	if (uart_console(&sport->port))
+		sport->rx_watermark = 1;
 	writeb(0, sport->port.membase + UARTTWFIFO);
-	writeb(1, sport->port.membase + UARTRWFIFO);
+	writeb(sport->rx_watermark, sport->port.membase + UARTRWFIFO);
 
 	/* Restore cr2 */
 	writeb(cr2_saved, sport->port.membase + UARTCR2);
@@ -1523,19 +1571,30 @@ static void lpuart32_setup_watermark(struct lpuart_port *sport)
 	ctrl = lpuart32_read(&sport->port, UARTCTRL);
 	ctrl_saved = ctrl;
 	ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE |
-			UARTCTRL_RIE | UARTCTRL_RE);
+			UARTCTRL_RIE | UARTCTRL_RE | UARTCTRL_ILIE);
 	lpuart32_write(&sport->port, ctrl, UARTCTRL);
 
 	/* enable FIFO mode */
 	val = lpuart32_read(&sport->port, UARTFIFO);
 	val |= UARTFIFO_TXFE | UARTFIFO_RXFE;
 	val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH;
+	val |= FIELD_PREP(UARTFIFO_RXIDEN, 0x3);
 	lpuart32_write(&sport->port, val, UARTFIFO);
 
 	/* set the watermark */
-	val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF);
+	if (uart_console(&sport->port))
+		sport->rx_watermark = 1;
+	val = (sport->rx_watermark << UARTWATER_RXWATER_OFF) |
+	      (0x0 << UARTWATER_TXWATER_OFF);
 	lpuart32_write(&sport->port, val, UARTWATER);
 
+	/* set RTS watermark */
+	if (!uart_console(&sport->port)) {
+		val = lpuart32_read(&sport->port, UARTMODIR);
+		val |= FIELD_PREP(UARTMODIR_RTSWATER, sport->rxfifo_size >> 1);
+		lpuart32_write(&sport->port, val, UARTMODIR);
+	}
+
 	/* Restore cr2 */
 	lpuart32_write(&sport->port, ctrl_saved, UARTCTRL);
 }
@@ -1547,7 +1606,8 @@ static void lpuart32_setup_watermark_enable(struct lpuart_port *sport)
 	lpuart32_setup_watermark(sport);
 
 	temp = lpuart32_read(&sport->port, UARTCTRL);
-	temp |= UARTCTRL_RE | UARTCTRL_TE | UARTCTRL_ILIE;
+	temp |= UARTCTRL_RE | UARTCTRL_TE;
+	temp |= FIELD_PREP(UARTCTRL_IDLECFG, 0x7);
 	lpuart32_write(&sport->port, temp, UARTCTRL);
 }
 
@@ -1679,19 +1739,23 @@ static int lpuart_startup(struct uart_port *port)
 	return 0;
 }
 
+static void lpuart32_hw_disable(struct lpuart_port *sport)
+{
+	unsigned long temp;
+
+	temp = lpuart32_read(&sport->port, UARTCTRL);
+	temp &= ~(UARTCTRL_RIE | UARTCTRL_ILIE | UARTCTRL_RE |
+		  UARTCTRL_TIE | UARTCTRL_TE);
+	lpuart32_write(&sport->port, temp, UARTCTRL);
+}
+
 static void lpuart32_configure(struct lpuart_port *sport)
 {
 	unsigned long temp;
 
-	if (sport->lpuart_dma_rx_use) {
-		/* RXWATER must be 0 */
-		temp = lpuart32_read(&sport->port, UARTWATER);
-		temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF);
-		lpuart32_write(&sport->port, temp, UARTWATER);
-	}
 	temp = lpuart32_read(&sport->port, UARTCTRL);
 	if (!sport->lpuart_dma_rx_use)
-		temp |= UARTCTRL_RIE;
+		temp |= UARTCTRL_RIE | UARTCTRL_ILIE;
 	if (!sport->lpuart_dma_tx_use)
 		temp |= UARTCTRL_TIE;
 	lpuart32_write(&sport->port, temp, UARTCTRL);
@@ -1703,11 +1767,12 @@ static void lpuart32_hw_setup(struct lpuart_port *sport)
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 
-	lpuart32_setup_watermark_enable(sport);
+	lpuart32_hw_disable(sport);
 
 	lpuart_rx_dma_startup(sport);
 	lpuart_tx_dma_startup(sport);
 
+	lpuart32_setup_watermark_enable(sport);
 	lpuart32_configure(sport);
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -1796,10 +1861,19 @@ static void lpuart32_shutdown(struct uart_port *port)
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	/* disable Rx/Tx and interrupts */
+	/* clear status */
+	temp = lpuart32_read(&sport->port, UARTSTAT);
+	lpuart32_write(&sport->port, temp, UARTSTAT);
+
+	/* disable Rx/Tx DMA */
+	temp = lpuart32_read(port, UARTBAUD);
+	temp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
+	lpuart32_write(port, temp, UARTBAUD);
+
+	/* disable Rx/Tx and interrupts and break condition */
 	temp = lpuart32_read(port, UARTCTRL);
-	temp &= ~(UARTCTRL_TE | UARTCTRL_RE |
-			UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
+	temp &= ~(UARTCTRL_TE | UARTCTRL_RE | UARTCTRL_ILIE |
+			UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE | UARTCTRL_SBK);
 	lpuart32_write(port, temp, UARTCTRL);
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -2631,7 +2705,7 @@ static int lpuart_global_reset(struct lpuart_port *sport)
 		return ret;
 	}
 
-	if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) {
+	if (is_imx7ulp_lpuart(sport) || is_imx8ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) {
 		/*
 		 * If the transmitter is used by earlycon, wait for transmit engine to
 		 * complete and then reset.
@@ -2688,6 +2762,7 @@ static int lpuart_probe(struct platform_device *pdev)
 	sport->port.dev = &pdev->dev;
 	sport->port.type = PORT_LPUART;
 	sport->devtype = sdata->devtype;
+	sport->rx_watermark = sdata->rx_watermark;
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 757825edb0cd..523f296d5747 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -210,12 +210,8 @@ struct imx_port {
 
 	struct mctrl_gpios *gpios;
 
-	/* shadow registers */
-	unsigned int ucr1;
-	unsigned int ucr2;
-	unsigned int ucr3;
-	unsigned int ucr4;
-	unsigned int ufcr;
+	/* counter to stop 0xff flood */
+	int idle_counter;
 
 	/* DMA fields */
 	unsigned int		dma_is_enabled:1;
@@ -273,59 +269,14 @@ static const struct of_device_id imx_uart_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
 
-static void imx_uart_writel(struct imx_port *sport, u32 val, u32 offset)
-{
-	switch (offset) {
-	case UCR1:
-		sport->ucr1 = val;
-		break;
-	case UCR2:
-		sport->ucr2 = val;
-		break;
-	case UCR3:
-		sport->ucr3 = val;
-		break;
-	case UCR4:
-		sport->ucr4 = val;
-		break;
-	case UFCR:
-		sport->ufcr = val;
-		break;
-	default:
-		break;
-	}
+static inline void imx_uart_writel(struct imx_port *sport, u32 val, u32 offset)
+{
 	writel(val, sport->port.membase + offset);
 }
 
-static u32 imx_uart_readl(struct imx_port *sport, u32 offset)
+static inline u32 imx_uart_readl(struct imx_port *sport, u32 offset)
 {
-	switch (offset) {
-	case UCR1:
-		return sport->ucr1;
-		break;
-	case UCR2:
-		/*
-		 * UCR2_SRST is the only bit in the cached registers that might
-		 * differ from the value that was last written. As it only
-		 * automatically becomes one after being cleared, reread
-		 * conditionally.
-		 */
-		if (!(sport->ucr2 & UCR2_SRST))
-			sport->ucr2 = readl(sport->port.membase + offset);
-		return sport->ucr2;
-		break;
-	case UCR3:
-		return sport->ucr3;
-		break;
-	case UCR4:
-		return sport->ucr4;
-		break;
-	case UFCR:
-		return sport->ufcr;
-		break;
-	default:
-		return readl(sport->port.membase + offset);
-	}
+	return readl(sport->port.membase + offset);
 }
 
 static inline unsigned imx_uart_uts_reg(struct imx_port *sport)
@@ -398,6 +349,41 @@ static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec)
 }
 
 /* called with port.lock taken and irqs off */
+static void imx_uart_soft_reset(struct imx_port *sport)
+{
+	int i = 10;
+	u32 ucr2, ubir, ubmr, uts;
+
+	/*
+	 * According to the Reference Manual description of the UART SRST bit:
+	 *
+	 * "Reset the transmit and receive state machines,
+	 * all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD
+	 * and UTS[6-3]".
+	 *
+	 * We don't need to restore the old values from USR1, USR2, URXD and
+	 * UTXD. UBRC is read only, so only save/restore the other three
+	 * registers.
+	 */
+	ubir = imx_uart_readl(sport, UBIR);
+	ubmr = imx_uart_readl(sport, UBMR);
+	uts = imx_uart_readl(sport, IMX21_UTS);
+
+	ucr2 = imx_uart_readl(sport, UCR2);
+	imx_uart_writel(sport, ucr2 & ~UCR2_SRST, UCR2);
+
+	while (!(imx_uart_readl(sport, UCR2) & UCR2_SRST) && (--i > 0))
+		udelay(1);
+
+	/* Restore the registers */
+	imx_uart_writel(sport, ubir, UBIR);
+	imx_uart_writel(sport, ubmr, UBMR);
+	imx_uart_writel(sport, uts, IMX21_UTS);
+
+	sport->idle_counter = 0;
+}
+
+/* called with port.lock taken and irqs off */
 static void imx_uart_start_rx(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
@@ -476,7 +462,8 @@ static void imx_uart_stop_tx(struct uart_port *port)
 				imx_uart_rts_inactive(sport, &ucr2);
 			imx_uart_writel(sport, ucr2, UCR2);
 
-			imx_uart_start_rx(port);
+			if (!port->rs485_rx_during_tx_gpio)
+				imx_uart_start_rx(port);
 
 			sport->tx_state = OFF;
 		}
@@ -705,7 +692,8 @@ static void imx_uart_start_tx(struct uart_port *port)
 				imx_uart_rts_inactive(sport, &ucr2);
 			imx_uart_writel(sport, ucr2, UCR2);
 
-			if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
+			if (!(port->rs485.flags & SER_RS485_RX_DURING_TX) &&
+			    !port->rs485_rx_during_tx_gpio)
 				imx_uart_stop_rx(port);
 
 			sport->tx_state = WAIT_AFTER_RTS;
@@ -771,7 +759,7 @@ static irqreturn_t __imx_uart_rtsint(int irq, void *dev_id)
 
 	imx_uart_writel(sport, USR1_RTSD, USR1);
 	usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS;
-	uart_handle_cts_change(&sport->port, !!usr1);
+	uart_handle_cts_change(&sport->port, usr1);
 	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 
 	return IRQ_HANDLED;
@@ -801,33 +789,73 @@ static irqreturn_t imx_uart_txint(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/* Check if hardware Rx flood is in progress, and issue soft reset to stop it.
+ * This is to be called from Rx ISRs only when some bytes were actually
+ * received.
+ *
+ * A way to reproduce the flood (checked on iMX6SX) is: open iMX UART at 9600
+ * 8N1, and from external source send 0xf0 char at 115200 8N1. In about 90% of
+ * cases this starts a flood of "receiving" of 0xff characters by the iMX6 UART
+ * that is terminated by any activity on RxD line, or could be stopped by
+ * issuing soft reset to the UART (just stop/start of RX does not help). Note
+ * that what we do here is sending isolated start bit about 2.4 times shorter
+ * than it is to be on UART configured baud rate.
+ */
+static void imx_uart_check_flood(struct imx_port *sport, u32 usr2)
+{
+	/* To detect hardware 0xff flood we monitor RxD line between RX
+	 * interrupts to isolate "receiving" of char(s) with no activity
+	 * on RxD line, that'd never happen on actual data transfers.
+	 *
+	 * We use USR2_WAKE bit to check for activity on RxD line, but we have a
+	 * race here if we clear USR2_WAKE when receiving of a char is in
+	 * progress, so we might get RX interrupt later with USR2_WAKE bit
+	 * cleared. Note though that as we don't try to clear USR2_WAKE when we
+	 * detected no activity, this race may hide actual activity only once.
+	 *
+	 * Yet another case where receive interrupt may occur without RxD
+	 * activity is expiration of aging timer, so we consider this as well.
+	 *
+	 * We use 'idle_counter' to ensure that we got at least so many RX
+	 * interrupts without any detected activity on RxD line. 2 cases
+	 * described plus 1 to be on the safe side gives us a margin of 3,
+	 * below. In practice I was not able to produce a false positive to
+	 * induce soft reset at regular data transfers even using 1 as the
+	 * margin, so 3 is actually very strong.
+	 *
+	 * We count interrupts, not chars in 'idle-counter' for simplicity.
+	 */
+
+	if (usr2 & USR2_WAKE) {
+		imx_uart_writel(sport, USR2_WAKE, USR2);
+		sport->idle_counter = 0;
+	} else if (++sport->idle_counter > 3) {
+		dev_warn(sport->port.dev, "RX flood detected: soft reset.");
+		imx_uart_soft_reset(sport); /* also clears 'sport->idle_counter' */
+	}
+}
+
 static irqreturn_t __imx_uart_rxint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
-	unsigned int rx, flg, ignored = 0;
 	struct tty_port *port = &sport->port.state->port;
+	u32 usr2, rx;
 
-	while (imx_uart_readl(sport, USR2) & USR2_RDR) {
-		u32 usr2;
+	/* If we received something, check for 0xff flood */
+	usr2 = imx_uart_readl(sport, USR2);
+	if (usr2 & USR2_RDR)
+		imx_uart_check_flood(sport, usr2);
 
-		flg = TTY_NORMAL;
+	while ((rx = imx_uart_readl(sport, URXD0)) & URXD_CHARRDY) {
+		unsigned int flg = TTY_NORMAL;
 		sport->port.icount.rx++;
 
-		rx = imx_uart_readl(sport, URXD0);
-
-		usr2 = imx_uart_readl(sport, USR2);
-		if (usr2 & USR2_BRCD) {
-			imx_uart_writel(sport, USR2_BRCD, USR2);
-			if (uart_handle_break(&sport->port))
-				continue;
-		}
-
-		if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
-			continue;
-
 		if (unlikely(rx & URXD_ERR)) {
-			if (rx & URXD_BRK)
+			if (rx & URXD_BRK) {
 				sport->port.icount.brk++;
+				if (uart_handle_break(&sport->port))
+					continue;
+			}
 			else if (rx & URXD_PRERR)
 				sport->port.icount.parity++;
 			else if (rx & URXD_FRMERR)
@@ -835,11 +863,8 @@ static irqreturn_t __imx_uart_rxint(int irq, void *dev_id)
 			if (rx & URXD_OVRRUN)
 				sport->port.icount.overrun++;
 
-			if (rx & sport->port.ignore_status_mask) {
-				if (++ignored > 100)
-					goto out;
+			if (rx & sport->port.ignore_status_mask)
 				continue;
-			}
 
 			rx &= (sport->port.read_status_mask | 0xFF);
 
@@ -853,16 +878,17 @@ static irqreturn_t __imx_uart_rxint(int irq, void *dev_id)
 				flg = TTY_OVERRUN;
 
 			sport->port.sysrq = 0;
+		} else if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) {
+			continue;
 		}
 
 		if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
-			goto out;
+			continue;
 
 		if (tty_insert_flip_char(port, rx, flg) == 0)
 			sport->port.icount.buf_overrun++;
 	}
 
-out:
 	tty_flip_buffer_push(port);
 
 	return IRQ_HANDLED;
@@ -1147,55 +1173,62 @@ static void imx_uart_dma_rx_callback(void *data)
 	status = dmaengine_tx_status(chan, sport->rx_cookie, &state);
 
 	if (status == DMA_ERROR) {
+		spin_lock(&sport->port.lock);
 		imx_uart_clear_rx_errors(sport);
+		spin_unlock(&sport->port.lock);
 		return;
 	}
 
-	if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) {
+	/*
+	 * The state-residue variable represents the empty space
+	 * relative to the entire buffer. Taking this in consideration
+	 * the head is always calculated base on the buffer total
+	 * length - DMA transaction residue. The UART script from the
+	 * SDMA firmware will jump to the next buffer descriptor,
+	 * once a DMA transaction if finalized (IMX53 RM - A.4.1.2.4).
+	 * Taking this in consideration the tail is always at the
+	 * beginning of the buffer descriptor that contains the head.
+	 */
 
-		/*
-		 * The state-residue variable represents the empty space
-		 * relative to the entire buffer. Taking this in consideration
-		 * the head is always calculated base on the buffer total
-		 * length - DMA transaction residue. The UART script from the
-		 * SDMA firmware will jump to the next buffer descriptor,
-		 * once a DMA transaction if finalized (IMX53 RM - A.4.1.2.4).
-		 * Taking this in consideration the tail is always at the
-		 * beginning of the buffer descriptor that contains the head.
-		 */
+	/* Calculate the head */
+	rx_ring->head = sg_dma_len(sgl) - state.residue;
+
+	/* Calculate the tail. */
+	bd_size = sg_dma_len(sgl) / sport->rx_periods;
+	rx_ring->tail = ((rx_ring->head-1) / bd_size) * bd_size;
 
-		/* Calculate the head */
-		rx_ring->head = sg_dma_len(sgl) - state.residue;
+	if (rx_ring->head <= sg_dma_len(sgl) &&
+	    rx_ring->head > rx_ring->tail) {
 
-		/* Calculate the tail. */
-		bd_size = sg_dma_len(sgl) / sport->rx_periods;
-		rx_ring->tail = ((rx_ring->head-1) / bd_size) * bd_size;
+		/* Move data from tail to head */
+		r_bytes = rx_ring->head - rx_ring->tail;
 
-		if (rx_ring->head <= sg_dma_len(sgl) &&
-		    rx_ring->head > rx_ring->tail) {
+		/* If we received something, check for 0xff flood */
+		spin_lock(&sport->port.lock);
+		imx_uart_check_flood(sport, imx_uart_readl(sport, USR2));
+		spin_unlock(&sport->port.lock);
 
-			/* Move data from tail to head */
-			r_bytes = rx_ring->head - rx_ring->tail;
+		if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) {
 
 			/* CPU claims ownership of RX DMA buffer */
 			dma_sync_sg_for_cpu(sport->port.dev, sgl, 1,
-				DMA_FROM_DEVICE);
+					    DMA_FROM_DEVICE);
 
 			w_bytes = tty_insert_flip_string(port,
-				sport->rx_buf + rx_ring->tail, r_bytes);
+							 sport->rx_buf + rx_ring->tail, r_bytes);
 
 			/* UART retrieves ownership of RX DMA buffer */
 			dma_sync_sg_for_device(sport->port.dev, sgl, 1,
-				DMA_FROM_DEVICE);
+					       DMA_FROM_DEVICE);
 
 			if (w_bytes != r_bytes)
 				sport->port.icount.buf_overrun++;
 
 			sport->port.icount.rx += w_bytes;
-		} else	{
-			WARN_ON(rx_ring->head > sg_dma_len(sgl));
-			WARN_ON(rx_ring->head <= rx_ring->tail);
 		}
+	} else	{
+		WARN_ON(rx_ring->head > sg_dma_len(sgl));
+		WARN_ON(rx_ring->head <= rx_ring->tail);
 	}
 
 	if (w_bytes) {
@@ -1271,6 +1304,8 @@ static void imx_uart_clear_rx_errors(struct imx_port *sport)
 		imx_uart_writel(sport, USR2_ORE, USR2);
 	}
 
+	sport->idle_counter = 0;
+
 }
 
 #define TXTL_DEFAULT 2 /* reset default */
@@ -1398,7 +1433,7 @@ static void imx_uart_disable_dma(struct imx_port *sport)
 static int imx_uart_startup(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
-	int retval, i;
+	int retval;
 	unsigned long flags;
 	int dma_is_inited = 0;
 	u32 ucr1, ucr2, ucr3, ucr4, uts;
@@ -1430,15 +1465,9 @@ static int imx_uart_startup(struct uart_port *port)
 		dma_is_inited = 1;
 
 	spin_lock_irqsave(&sport->port.lock, flags);
-	/* Reset fifo's and state machines */
-	i = 100;
 
-	ucr2 = imx_uart_readl(sport, UCR2);
-	ucr2 &= ~UCR2_SRST;
-	imx_uart_writel(sport, ucr2, UCR2);
-
-	while (!(imx_uart_readl(sport, UCR2) & UCR2_SRST) && (--i > 0))
-		udelay(1);
+	/* Reset fifo's and state machines */
+	imx_uart_soft_reset(sport);
 
 	/*
 	 * Finally, clear and enable interrupts
@@ -1564,7 +1593,8 @@ static void imx_uart_shutdown(struct uart_port *port)
 	spin_lock_irqsave(&sport->port.lock, flags);
 
 	ucr1 = imx_uart_readl(sport, UCR1);
-	ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_RXDMAEN | UCR1_ATDMAEN);
+	ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_RXDMAEN |
+		  UCR1_ATDMAEN | UCR1_SNDBRK);
 	/* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
 	if (port->rs485.flags & SER_RS485_ENABLED &&
 	    port->rs485.flags & SER_RS485_RTS_ON_SEND &&
@@ -1593,8 +1623,6 @@ static void imx_uart_flush_buffer(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
 	struct scatterlist *sgl = &sport->tx_sgl[0];
-	u32 ucr2;
-	int i = 100, ubir, ubmr, uts;
 
 	if (!sport->dma_chan_tx)
 		return;
@@ -1612,32 +1640,8 @@ static void imx_uart_flush_buffer(struct uart_port *port)
 		sport->dma_is_txing = 0;
 	}
 
-	/*
-	 * According to the Reference Manual description of the UART SRST bit:
-	 *
-	 * "Reset the transmit and receive state machines,
-	 * all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD
-	 * and UTS[6-3]".
-	 *
-	 * We don't need to restore the old values from USR1, USR2, URXD and
-	 * UTXD. UBRC is read only, so only save/restore the other three
-	 * registers.
-	 */
-	ubir = imx_uart_readl(sport, UBIR);
-	ubmr = imx_uart_readl(sport, UBMR);
-	uts = imx_uart_readl(sport, IMX21_UTS);
-
-	ucr2 = imx_uart_readl(sport, UCR2);
-	ucr2 &= ~UCR2_SRST;
-	imx_uart_writel(sport, ucr2, UCR2);
-
-	while (!(imx_uart_readl(sport, UCR2) & UCR2_SRST) && (--i > 0))
-		udelay(1);
+	imx_uart_soft_reset(sport);
 
-	/* Restore the registers */
-	imx_uart_writel(sport, ubir, UBIR);
-	imx_uart_writel(sport, ubmr, UBMR);
-	imx_uart_writel(sport, uts, IMX21_UTS);
 }
 
 static void
@@ -1955,6 +1959,10 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio
 	    rs485conf->flags & SER_RS485_RX_DURING_TX)
 		imx_uart_start_rx(port);
 
+	if (port->rs485_rx_during_tx_gpio)
+		gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio,
+					 !!(rs485conf->flags & SER_RS485_RX_DURING_TX));
+
 	return 0;
 }
 
@@ -2340,13 +2348,6 @@ static int imx_uart_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/* initialize shadow register values */
-	sport->ucr1 = readl(sport->port.membase + UCR1);
-	sport->ucr2 = readl(sport->port.membase + UCR2);
-	sport->ucr3 = readl(sport->port.membase + UCR3);
-	sport->ucr4 = readl(sport->port.membase + UCR4);
-	sport->ufcr = readl(sport->port.membase + UFCR);
-
 	ret = uart_get_rs485_mode(&sport->port);
 	if (ret) {
 		clk_disable_unprepare(sport->clk_ipg);
@@ -2374,6 +2375,11 @@ static int imx_uart_probe(struct platform_device *pdev)
 	ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN);
 	imx_uart_writel(sport, ucr1, UCR1);
 
+	/* Disable Ageing Timer interrupt */
+	ucr2 = imx_uart_readl(sport, UCR2);
+	ucr2 &= ~UCR2_ATEN;
+	imx_uart_writel(sport, ucr2, UCR2);
+
 	/*
 	 * In case RS485 is enabled without GPIO RTS control, the UART IP
 	 * is used to control CTS signal. Keep both the UART and Receiver
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index 062812fe1b09..80de3a42b67b 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -5,7 +5,9 @@
  * Copyright (C) 2019-2020 Antmicro <www.antmicro.com>
  */
 
+#include <linux/bits.h>
 #include <linux/console.h>
+#include <linux/interrupt.h>
 #include <linux/litex.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -38,13 +40,13 @@
 #define OFF_EV_ENABLE	0x14
 
 /* events */
-#define EV_TX		0x1
-#define EV_RX		0x2
+#define EV_TX		BIT(0)
+#define EV_RX		BIT(1)
 
 struct liteuart_port {
 	struct uart_port port;
 	struct timer_list timer;
-	u32 id;
+	u8 irq_reg;
 };
 
 #define to_liteuart_port(port)	container_of(port, struct liteuart_port, port)
@@ -57,7 +59,7 @@ static struct console liteuart_console;
 
 static struct uart_driver liteuart_driver = {
 	.owner = THIS_MODULE,
-	.driver_name = "liteuart",
+	.driver_name = KBUILD_MODNAME,
 	.dev_name = "ttyLXU",
 	.major = 0,
 	.minor = 0,
@@ -67,38 +69,95 @@ static struct uart_driver liteuart_driver = {
 #endif
 };
 
-static void liteuart_timer(struct timer_list *t)
+static void liteuart_update_irq_reg(struct uart_port *port, bool set, u8 mask)
+{
+	struct liteuart_port *uart = to_liteuart_port(port);
+
+	if (set)
+		uart->irq_reg |= mask;
+	else
+		uart->irq_reg &= ~mask;
+
+	if (port->irq)
+		litex_write8(port->membase + OFF_EV_ENABLE, uart->irq_reg);
+}
+
+static void liteuart_stop_tx(struct uart_port *port)
+{
+	liteuart_update_irq_reg(port, false, EV_TX);
+}
+
+static void liteuart_start_tx(struct uart_port *port)
+{
+	liteuart_update_irq_reg(port, true, EV_TX);
+}
+
+static void liteuart_stop_rx(struct uart_port *port)
+{
+	struct liteuart_port *uart = to_liteuart_port(port);
+
+	/* just delete timer */
+	del_timer(&uart->timer);
+}
+
+static void liteuart_rx_chars(struct uart_port *port)
 {
-	struct liteuart_port *uart = from_timer(uart, t, timer);
-	struct uart_port *port = &uart->port;
 	unsigned char __iomem *membase = port->membase;
-	unsigned int flg = TTY_NORMAL;
-	int ch;
-	unsigned long status;
+	u8 ch;
 
-	while ((status = !litex_read8(membase + OFF_RXEMPTY)) == 1) {
+	while (!litex_read8(membase + OFF_RXEMPTY)) {
 		ch = litex_read8(membase + OFF_RXTX);
 		port->icount.rx++;
 
 		/* necessary for RXEMPTY to refresh its value */
-		litex_write8(membase + OFF_EV_PENDING, EV_TX | EV_RX);
+		litex_write8(membase + OFF_EV_PENDING, EV_RX);
 
 		/* no overflow bits in status */
 		if (!(uart_handle_sysrq_char(port, ch)))
-			uart_insert_char(port, status, 0, ch, flg);
-
-		tty_flip_buffer_push(&port->state->port);
+			uart_insert_char(port, 1, 0, ch, TTY_NORMAL);
 	}
 
-	mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
+	tty_flip_buffer_push(&port->state->port);
 }
 
-static void liteuart_putchar(struct uart_port *port, unsigned char ch)
+static void liteuart_tx_chars(struct uart_port *port)
 {
-	while (litex_read8(port->membase + OFF_TXFULL))
-		cpu_relax();
+	u8 ch;
 
-	litex_write8(port->membase + OFF_RXTX, ch);
+	uart_port_tx(port, ch,
+		!litex_read8(port->membase + OFF_TXFULL),
+		litex_write8(port->membase + OFF_RXTX, ch));
+}
+
+static irqreturn_t liteuart_interrupt(int irq, void *data)
+{
+	struct liteuart_port *uart = data;
+	struct uart_port *port = &uart->port;
+	unsigned long flags;
+	u8 isr;
+
+	/*
+	 * if polling, the context would be "in_serving_softirq", so use
+	 * irq[save|restore] spin_lock variants to cover all possibilities
+	 */
+	spin_lock_irqsave(&port->lock, flags);
+	isr = litex_read8(port->membase + OFF_EV_PENDING) & uart->irq_reg;
+	if (isr & EV_RX)
+		liteuart_rx_chars(port);
+	if (isr & EV_TX)
+		liteuart_tx_chars(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return IRQ_RETVAL(isr);
+}
+
+static void liteuart_timer(struct timer_list *t)
+{
+	struct liteuart_port *uart = from_timer(uart, t, timer);
+	struct uart_port *port = &uart->port;
+
+	liteuart_interrupt(0, port);
+	mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
 }
 
 static unsigned int liteuart_tx_empty(struct uart_port *port)
@@ -120,60 +179,49 @@ static unsigned int liteuart_get_mctrl(struct uart_port *port)
 	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 }
 
-static void liteuart_stop_tx(struct uart_port *port)
-{
-}
-
-static void liteuart_start_tx(struct uart_port *port)
+static int liteuart_startup(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->state->xmit;
-	unsigned char ch;
-
-	if (unlikely(port->x_char)) {
-		litex_write8(port->membase + OFF_RXTX, port->x_char);
-		port->icount.tx++;
-		port->x_char = 0;
-	} else if (!uart_circ_empty(xmit)) {
-		while (xmit->head != xmit->tail) {
-			ch = xmit->buf[xmit->tail];
-			uart_xmit_advance(port, 1);
-			liteuart_putchar(port, ch);
+	struct liteuart_port *uart = to_liteuart_port(port);
+	unsigned long flags;
+	int ret;
+
+	if (port->irq) {
+		ret = request_irq(port->irq, liteuart_interrupt, 0,
+				  KBUILD_MODNAME, uart);
+		if (ret) {
+			dev_warn(port->dev,
+				"line %d irq %d failed: switch to polling\n",
+				port->line, port->irq);
+			port->irq = 0;
 		}
 	}
 
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(port);
-}
-
-static void liteuart_stop_rx(struct uart_port *port)
-{
-	struct liteuart_port *uart = to_liteuart_port(port);
+	spin_lock_irqsave(&port->lock, flags);
+	/* only enabling rx irqs during startup */
+	liteuart_update_irq_reg(port, true, EV_RX);
+	spin_unlock_irqrestore(&port->lock, flags);
 
-	/* just delete timer */
-	del_timer(&uart->timer);
-}
+	if (!port->irq) {
+		timer_setup(&uart->timer, liteuart_timer, 0);
+		mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
+	}
 
-static void liteuart_break_ctl(struct uart_port *port, int break_state)
-{
-	/* LiteUART doesn't support sending break signal */
+	return 0;
 }
 
-static int liteuart_startup(struct uart_port *port)
+static void liteuart_shutdown(struct uart_port *port)
 {
 	struct liteuart_port *uart = to_liteuart_port(port);
+	unsigned long flags;
 
-	/* disable events */
-	litex_write8(port->membase + OFF_EV_ENABLE, 0);
-
-	/* prepare timer for polling */
-	timer_setup(&uart->timer, liteuart_timer, 0);
-	mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
-
-	return 0;
-}
+	spin_lock_irqsave(&port->lock, flags);
+	liteuart_update_irq_reg(port, false, EV_RX | EV_TX);
+	spin_unlock_irqrestore(&port->lock, flags);
 
-static void liteuart_shutdown(struct uart_port *port)
-{
+	if (port->irq)
+		free_irq(port->irq, port);
+	else
+		del_timer_sync(&uart->timer);
 }
 
 static void liteuart_set_termios(struct uart_port *port, struct ktermios *new,
@@ -196,15 +244,6 @@ static const char *liteuart_type(struct uart_port *port)
 	return "liteuart";
 }
 
-static void liteuart_release_port(struct uart_port *port)
-{
-}
-
-static int liteuart_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
 static void liteuart_config_port(struct uart_port *port, int flags)
 {
 	/*
@@ -231,13 +270,10 @@ static const struct uart_ops liteuart_ops = {
 	.stop_tx	= liteuart_stop_tx,
 	.start_tx	= liteuart_start_tx,
 	.stop_rx	= liteuart_stop_rx,
-	.break_ctl	= liteuart_break_ctl,
 	.startup	= liteuart_startup,
 	.shutdown	= liteuart_shutdown,
 	.set_termios	= liteuart_set_termios,
 	.type		= liteuart_type,
-	.release_port	= liteuart_release_port,
-	.request_port	= liteuart_request_port,
 	.config_port	= liteuart_config_port,
 	.verify_port	= liteuart_verify_port,
 };
@@ -249,6 +285,23 @@ static int liteuart_probe(struct platform_device *pdev)
 	struct xa_limit limit;
 	int dev_id, ret;
 
+	uart = devm_kzalloc(&pdev->dev, sizeof(struct liteuart_port), GFP_KERNEL);
+	if (!uart)
+		return -ENOMEM;
+
+	port = &uart->port;
+
+	/* get membase */
+	port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(port->membase))
+		return PTR_ERR(port->membase);
+
+	ret = platform_get_irq_optional(pdev, 0);
+	if (ret < 0 && ret != -ENXIO)
+		return ret;
+	if (ret > 0)
+		port->irq = ret;
+
 	/* look for aliases; auto-enumerate for free index if not found */
 	dev_id = of_alias_get_id(pdev->dev.of_node, "serial");
 	if (dev_id < 0)
@@ -256,32 +309,16 @@ static int liteuart_probe(struct platform_device *pdev)
 	else
 		limit = XA_LIMIT(dev_id, dev_id);
 
-	uart = devm_kzalloc(&pdev->dev, sizeof(struct liteuart_port), GFP_KERNEL);
-	if (!uart)
-		return -ENOMEM;
-
 	ret = xa_alloc(&liteuart_array, &dev_id, uart, limit, GFP_KERNEL);
 	if (ret)
 		return ret;
 
-	uart->id = dev_id;
-	port = &uart->port;
-
-	/* get membase */
-	port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-	if (IS_ERR(port->membase)) {
-		ret = PTR_ERR(port->membase);
-		goto err_erase_id;
-	}
-
 	/* values not from device tree */
 	port->dev = &pdev->dev;
 	port->iotype = UPIO_MEM;
 	port->flags = UPF_BOOT_AUTOCONF;
 	port->ops = &liteuart_ops;
-	port->regshift = 2;
 	port->fifosize = 16;
-	port->iobase = 1;
 	port->type = PORT_UNKNOWN;
 	port->line = dev_id;
 	spin_lock_init(&port->lock);
@@ -295,7 +332,7 @@ static int liteuart_probe(struct platform_device *pdev)
 	return 0;
 
 err_erase_id:
-	xa_erase(&liteuart_array, uart->id);
+	xa_erase(&liteuart_array, dev_id);
 
 	return ret;
 }
@@ -303,10 +340,10 @@ err_erase_id:
 static int liteuart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
-	struct liteuart_port *uart = to_liteuart_port(port);
+	unsigned int line = port->line;
 
 	uart_remove_one_port(&liteuart_driver, port);
-	xa_erase(&liteuart_array, uart->id);
+	xa_erase(&liteuart_array, line);
 
 	return 0;
 }
@@ -321,13 +358,21 @@ static struct platform_driver liteuart_platform_driver = {
 	.probe = liteuart_probe,
 	.remove = liteuart_remove,
 	.driver = {
-		.name = "liteuart",
+		.name = KBUILD_MODNAME,
 		.of_match_table = liteuart_of_match,
 	},
 };
 
 #ifdef CONFIG_SERIAL_LITEUART_CONSOLE
 
+static void liteuart_putchar(struct uart_port *port, unsigned char ch)
+{
+	while (litex_read8(port->membase + OFF_TXFULL))
+		cpu_relax();
+
+	litex_write8(port->membase + OFF_RXTX, ch);
+}
+
 static void liteuart_console_write(struct console *co, const char *s,
 	unsigned int count)
 {
@@ -367,7 +412,7 @@ static int liteuart_console_setup(struct console *co, char *options)
 }
 
 static struct console liteuart_console = {
-	.name = "liteuart",
+	.name = KBUILD_MODNAME,
 	.write = liteuart_console_write,
 	.device = uart_console_device,
 	.setup = liteuart_console_setup,
@@ -415,12 +460,10 @@ static int __init liteuart_init(void)
 		return res;
 
 	res = platform_driver_register(&liteuart_platform_driver);
-	if (res) {
+	if (res)
 		uart_unregister_driver(&liteuart_driver);
-		return res;
-	}
 
-	return 0;
+	return res;
 }
 
 static void __exit liteuart_exit(void)
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index bb74f23251fe..86dcbff8faa3 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -247,7 +247,7 @@ static int max3100_handlerx(struct max3100_port *s, u16 rx)
 	cts = (rx & MAX3100_CTS) > 0;
 	if (s->cts != cts) {
 		s->cts = cts;
-		uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0);
+		uart_handle_cts_change(&s->port, cts);
 	}
 
 	return ret;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 4eb24e3407f8..e9cacfe7e032 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -819,8 +819,7 @@ static irqreturn_t max310x_port_irq(struct max310x_port *s, int portno)
 
 		if (ists & MAX310X_IRQ_CTS_BIT) {
 			lsr = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG);
-			uart_handle_cts_change(port,
-					       !!(lsr & MAX310X_LSR_CTS_BIT));
+			uart_handle_cts_change(port, lsr & MAX310X_LSR_CTS_BIT);
 		}
 		if (rxlen)
 			max310x_handle_rx(port, rxlen);
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 843798e63084..90953e679e38 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1120,6 +1120,7 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud,
 
 static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
 			     unsigned long *saved_flags)
+	__must_hold(&port->lock)
 {
 	unsigned int rxstale, watermark, mask;
 	struct msm_port *msm_port = to_msm_port(port);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 9576ba8bbc40..cc83b772b7ca 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1775,7 +1775,7 @@ static void pch_uart_exit_port(struct eg20t_port *priv)
 	char name[32];
 
 	snprintf(name, sizeof(name), "uart%d_regs", priv->port.line);
-	debugfs_remove(debugfs_lookup(name, NULL));
+	debugfs_lookup_and_remove(name, NULL);
 	uart_remove_one_port(&pch_uart_driver, &priv->port);
 	free_page((unsigned long)priv->rxbuf.buf);
 }
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index ba3435263c1f..196a4e678451 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -889,6 +889,8 @@ static int pic32_uart_probe(struct platform_device *pdev)
 	sport->irq_rx		= irq_of_parse_and_map(np, 1);
 	sport->irq_tx		= irq_of_parse_and_map(np, 2);
 	sport->clk		= devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(sport->clk))
+		return PTR_ERR(sport->clk);
 	sport->dev		= &pdev->dev;
 
 	/* Hardware flow control: gpios
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 57f04f8bf504..d69592e5e2ec 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/pm_wakeirq.h>
-#include <linux/qcom-geni-se.h>
+#include <linux/soc/qcom/geni-se.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/slab.h>
@@ -39,76 +39,70 @@
 #define SE_UART_MANUAL_RFR		0x2ac
 
 /* SE_UART_TRANS_CFG */
-#define UART_TX_PAR_EN		BIT(0)
-#define UART_CTS_MASK		BIT(1)
-
-/* SE_UART_TX_WORD_LEN */
-#define TX_WORD_LEN_MSK		GENMASK(9, 0)
+#define UART_TX_PAR_EN			BIT(0)
+#define UART_CTS_MASK			BIT(1)
 
 /* SE_UART_TX_STOP_BIT_LEN */
-#define TX_STOP_BIT_LEN_MSK	GENMASK(23, 0)
-#define TX_STOP_BIT_LEN_1	0
-#define TX_STOP_BIT_LEN_1_5	1
-#define TX_STOP_BIT_LEN_2	2
-
-/* SE_UART_TX_TRANS_LEN */
-#define TX_TRANS_LEN_MSK	GENMASK(23, 0)
+#define TX_STOP_BIT_LEN_1		0
+#define TX_STOP_BIT_LEN_2		2
 
 /* SE_UART_RX_TRANS_CFG */
-#define UART_RX_INS_STATUS_BIT	BIT(2)
-#define UART_RX_PAR_EN		BIT(3)
+#define UART_RX_PAR_EN			BIT(3)
 
 /* SE_UART_RX_WORD_LEN */
-#define RX_WORD_LEN_MASK	GENMASK(9, 0)
+#define RX_WORD_LEN_MASK		GENMASK(9, 0)
 
 /* SE_UART_RX_STALE_CNT */
-#define RX_STALE_CNT		GENMASK(23, 0)
+#define RX_STALE_CNT			GENMASK(23, 0)
 
 /* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */
-#define PAR_CALC_EN		BIT(0)
-#define PAR_MODE_MSK		GENMASK(2, 1)
-#define PAR_MODE_SHFT		1
-#define PAR_EVEN		0x00
-#define PAR_ODD			0x01
-#define PAR_SPACE		0x10
-#define PAR_MARK		0x11
+#define PAR_CALC_EN			BIT(0)
+#define PAR_EVEN			0x00
+#define PAR_ODD				0x01
+#define PAR_SPACE			0x10
 
 /* SE_UART_MANUAL_RFR register fields */
-#define UART_MANUAL_RFR_EN	BIT(31)
-#define UART_RFR_NOT_READY	BIT(1)
-#define UART_RFR_READY		BIT(0)
+#define UART_MANUAL_RFR_EN		BIT(31)
+#define UART_RFR_NOT_READY		BIT(1)
+#define UART_RFR_READY			BIT(0)
 
 /* UART M_CMD OP codes */
-#define UART_START_TX		0x1
-#define UART_START_BREAK	0x4
-#define UART_STOP_BREAK		0x5
+#define UART_START_TX			0x1
 /* UART S_CMD OP codes */
-#define UART_START_READ		0x1
-#define UART_PARAM		0x1
-
-#define UART_OVERSAMPLING	32
-#define STALE_TIMEOUT		16
-#define DEFAULT_BITS_PER_CHAR	10
-#define GENI_UART_CONS_PORTS	1
-#define GENI_UART_PORTS		3
-#define DEF_FIFO_DEPTH_WORDS	16
-#define DEF_TX_WM		2
-#define DEF_FIFO_WIDTH_BITS	32
-#define UART_RX_WM		2
+#define UART_START_READ			0x1
+#define UART_PARAM			0x1
+#define UART_PARAM_RFR_OPEN		BIT(7)
+
+#define UART_OVERSAMPLING		32
+#define STALE_TIMEOUT			16
+#define DEFAULT_BITS_PER_CHAR		10
+#define GENI_UART_CONS_PORTS		1
+#define GENI_UART_PORTS			3
+#define DEF_FIFO_DEPTH_WORDS		16
+#define DEF_TX_WM			2
+#define DEF_FIFO_WIDTH_BITS		32
+#define UART_RX_WM			2
 
 /* SE_UART_LOOPBACK_CFG */
-#define RX_TX_SORTED	BIT(0)
-#define CTS_RTS_SORTED	BIT(1)
-#define RX_TX_CTS_RTS_SORTED	(RX_TX_SORTED | CTS_RTS_SORTED)
+#define RX_TX_SORTED			BIT(0)
+#define CTS_RTS_SORTED			BIT(1)
+#define RX_TX_CTS_RTS_SORTED		(RX_TX_SORTED | CTS_RTS_SORTED)
 
 /* UART pin swap value */
-#define DEFAULT_IO_MACRO_IO0_IO1_MASK		GENMASK(3, 0)
+#define DEFAULT_IO_MACRO_IO0_IO1_MASK	GENMASK(3, 0)
 #define IO_MACRO_IO0_SEL		0x3
-#define DEFAULT_IO_MACRO_IO2_IO3_MASK		GENMASK(15, 4)
+#define DEFAULT_IO_MACRO_IO2_IO3_MASK	GENMASK(15, 4)
 #define IO_MACRO_IO2_IO3_SWAP		0x4640
 
 /* We always configure 4 bytes per FIFO word */
-#define BYTES_PER_FIFO_WORD		4
+#define BYTES_PER_FIFO_WORD		4U
+
+#define DMA_RX_BUF_SIZE		2048
+
+struct qcom_geni_device_data {
+	bool console;
+	enum geni_se_xfer_mode mode;
+};
 
 struct qcom_geni_private_data {
 	/* NOTE: earlycon port will have NULL here */
@@ -128,10 +122,11 @@ struct qcom_geni_serial_port {
 	u32 tx_fifo_depth;
 	u32 tx_fifo_width;
 	u32 rx_fifo_depth;
+	dma_addr_t tx_dma_addr;
+	dma_addr_t rx_dma_addr;
 	bool setup;
-	int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
 	unsigned int baud;
-	void *rx_fifo;
+	void *rx_buf;
 	u32 loopback;
 	bool brk;
 
@@ -141,44 +136,42 @@ struct qcom_geni_serial_port {
 	bool cts_rts_swap;
 
 	struct qcom_geni_private_data private_data;
+	const struct qcom_geni_device_data *dev_data;
 };
 
 static const struct uart_ops qcom_geni_console_pops;
 static const struct uart_ops qcom_geni_uart_pops;
 static struct uart_driver qcom_geni_console_driver;
 static struct uart_driver qcom_geni_uart_driver;
-static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop);
-static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop);
-static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
-static void qcom_geni_serial_stop_rx(struct uart_port *uport);
-static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop);
 
-#define to_dev_port(ptr, member) \
-		container_of(ptr, struct qcom_geni_serial_port, member)
+static inline struct qcom_geni_serial_port *to_dev_port(struct uart_port *uport)
+{
+	return container_of(uport, struct qcom_geni_serial_port, uport);
+}
 
 static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = {
 	[0] = {
 		.uport = {
-				.iotype = UPIO_MEM,
-				.ops = &qcom_geni_uart_pops,
-				.flags = UPF_BOOT_AUTOCONF,
-				.line = 0,
+			.iotype = UPIO_MEM,
+			.ops = &qcom_geni_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.line = 0,
 		},
 	},
 	[1] = {
 		.uport = {
-				.iotype = UPIO_MEM,
-				.ops = &qcom_geni_uart_pops,
-				.flags = UPF_BOOT_AUTOCONF,
-				.line = 1,
+			.iotype = UPIO_MEM,
+			.ops = &qcom_geni_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.line = 1,
 		},
 	},
 	[2] = {
 		.uport = {
-				.iotype = UPIO_MEM,
-				.ops = &qcom_geni_uart_pops,
-				.flags = UPF_BOOT_AUTOCONF,
-				.line = 2,
+			.iotype = UPIO_MEM,
+			.ops = &qcom_geni_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.line = 2,
 		},
 	},
 };
@@ -195,7 +188,7 @@ static struct qcom_geni_serial_port qcom_geni_console_port = {
 static int qcom_geni_serial_request_port(struct uart_port *uport)
 {
 	struct platform_device *pdev = to_platform_device(uport->dev);
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 
 	uport->membase = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(uport->membase))
@@ -232,7 +225,7 @@ static void qcom_geni_serial_set_mctrl(struct uart_port *uport,
 							unsigned int mctrl)
 {
 	u32 uart_manual_rfr = 0;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 
 	if (uart_console(uport))
 		return;
@@ -262,6 +255,16 @@ static struct qcom_geni_serial_port *get_port_from_line(int line, bool console)
 	return port;
 }
 
+static bool qcom_geni_serial_main_active(struct uart_port *uport)
+{
+	return readl(uport->membase + SE_GENI_STATUS) & M_GENI_CMD_ACTIVE;
+}
+
+static bool qcom_geni_serial_secondary_active(struct uart_port *uport)
+{
+	return readl(uport->membase + SE_GENI_STATUS) & S_GENI_CMD_ACTIVE;
+}
+
 static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
 				int offset, int field, bool set)
 {
@@ -273,7 +276,7 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
 	struct qcom_geni_private_data *private_data = uport->private_data;
 
 	if (private_data->drv) {
-		port = to_dev_port(uport, uport);
+		port = to_dev_port(uport);
 		baud = port->baud;
 		if (!baud)
 			baud = 115200;
@@ -338,7 +341,6 @@ static void qcom_geni_serial_abort_rx(struct uart_port *uport)
 }
 
 #ifdef CONFIG_CONSOLE_POLL
-
 static int qcom_geni_serial_get_char(struct uart_port *uport)
 {
 	struct qcom_geni_private_data *private_data = uport->private_data;
@@ -521,12 +523,12 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s,
 		spin_unlock_irqrestore(&uport->lock, flags);
 }
 
-static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
+static void handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
 {
 	u32 i;
 	unsigned char buf[sizeof(u32)];
 	struct tty_port *tport;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 
 	tport = &uport->state->port;
 	for (i = 0; i < bytes; ) {
@@ -556,30 +558,21 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
 	}
 	if (!drop)
 		tty_flip_buffer_push(tport);
-	return 0;
 }
 #else
-static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
+static void handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
 {
-	return -EPERM;
-}
 
+}
 #endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */
 
-static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
+static void handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
 {
-	struct tty_port *tport;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
-	u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE;
-	u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw;
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+	struct tty_port *tport = &uport->state->port;
 	int ret;
 
-	tport = &uport->state->port;
-	ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words);
-	if (drop)
-		return 0;
-
-	ret = tty_insert_flip_string(tport, port->rx_fifo, bytes);
+	ret = tty_insert_flip_string(tport, port->rx_buf, bytes);
 	if (ret != bytes) {
 		dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n",
 				__func__, ret, bytes);
@@ -587,19 +580,82 @@ static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
 	}
 	uport->icount.rx += ret;
 	tty_flip_buffer_push(tport);
-	return ret;
 }
 
-static void qcom_geni_serial_start_tx(struct uart_port *uport)
+static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
 {
-	u32 irq_en;
-	u32 status;
+	return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
+}
+
+static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+	bool done;
+	u32 m_irq_en;
 
-	status = readl(uport->membase + SE_GENI_STATUS);
-	if (status & M_GENI_CMD_ACTIVE)
+	if (!qcom_geni_serial_main_active(uport))
 		return;
 
-	if (!qcom_geni_serial_tx_empty(uport))
+	if (port->rx_dma_addr) {
+		geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr,
+				      port->tx_remaining);
+		port->tx_dma_addr = 0;
+		port->tx_remaining = 0;
+	}
+
+	m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
+	writel(m_irq_en, uport->membase + SE_GENI_M_IRQ_EN);
+	geni_se_cancel_m_cmd(&port->se);
+
+	done = qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
+					 S_CMD_CANCEL_EN, true);
+	if (!done) {
+		geni_se_abort_m_cmd(&port->se);
+		done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
+						 M_CMD_ABORT_EN, true);
+		if (!done)
+			dev_err_ratelimited(uport->dev, "M_CMD_ABORT_EN not set");
+		writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
+	}
+
+	writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
+}
+
+static void qcom_geni_serial_start_tx_dma(struct uart_port *uport)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+	struct circ_buf *xmit = &uport->state->xmit;
+	unsigned int xmit_size;
+	int ret;
+
+	if (port->tx_dma_addr)
+		return;
+
+	xmit_size = uart_circ_chars_pending(xmit);
+	if (xmit_size < WAKEUP_CHARS)
+		uart_write_wakeup(uport);
+
+	xmit_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+
+	qcom_geni_serial_setup_tx(uport, xmit_size);
+
+	ret = geni_se_tx_dma_prep(&port->se, &xmit->buf[xmit->tail],
+				  xmit_size, &port->tx_dma_addr);
+	if (ret) {
+		dev_err(uport->dev, "unable to start TX SE DMA: %d\n", ret);
+		qcom_geni_serial_stop_tx_dma(uport);
+		return;
+	}
+
+	port->tx_remaining = xmit_size;
+}
+
+static void qcom_geni_serial_start_tx_fifo(struct uart_port *uport)
+{
+	u32 irq_en;
+
+	if (qcom_geni_serial_main_active(uport) ||
+	    !qcom_geni_serial_tx_empty(uport))
 		return;
 
 	irq_en = readl(uport->membase +	SE_GENI_M_IRQ_EN);
@@ -609,19 +665,17 @@ static void qcom_geni_serial_start_tx(struct uart_port *uport)
 	writel(irq_en, uport->membase +	SE_GENI_M_IRQ_EN);
 }
 
-static void qcom_geni_serial_stop_tx(struct uart_port *uport)
+static void qcom_geni_serial_stop_tx_fifo(struct uart_port *uport)
 {
 	u32 irq_en;
-	u32 status;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 
 	irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
 	irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN);
 	writel(0, uport->membase + SE_GENI_TX_WATERMARK_REG);
 	writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
-	status = readl(uport->membase + SE_GENI_STATUS);
 	/* Possible stop tx is called multiple times. */
-	if (!(status & M_GENI_CMD_ACTIVE))
+	if (!qcom_geni_serial_main_active(uport))
 		return;
 
 	geni_se_cancel_m_cmd(&port->se);
@@ -635,32 +689,34 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport)
 	writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
 }
 
-static void qcom_geni_serial_start_rx(struct uart_port *uport)
+static void qcom_geni_serial_handle_rx_fifo(struct uart_port *uport, bool drop)
 {
-	u32 irq_en;
 	u32 status;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
-
-	status = readl(uport->membase + SE_GENI_STATUS);
-	if (status & S_GENI_CMD_ACTIVE)
-		qcom_geni_serial_stop_rx(uport);
-
-	geni_se_setup_s_cmd(&port->se, UART_START_READ, 0);
+	u32 word_cnt;
+	u32 last_word_byte_cnt;
+	u32 last_word_partial;
+	u32 total_bytes;
 
-	irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
-	irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN;
-	writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
+	status = readl(uport->membase +	SE_GENI_RX_FIFO_STATUS);
+	word_cnt = status & RX_FIFO_WC_MSK;
+	last_word_partial = status & RX_LAST;
+	last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >>
+						RX_LAST_BYTE_VALID_SHFT;
 
-	irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
-	irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
-	writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
+	if (!word_cnt)
+		return;
+	total_bytes = BYTES_PER_FIFO_WORD * (word_cnt - 1);
+	if (last_word_partial && last_word_byte_cnt)
+		total_bytes += last_word_byte_cnt;
+	else
+		total_bytes += BYTES_PER_FIFO_WORD;
+	handle_rx_console(uport, total_bytes, drop);
 }
 
-static void qcom_geni_serial_stop_rx(struct uart_port *uport)
+static void qcom_geni_serial_stop_rx_fifo(struct uart_port *uport)
 {
 	u32 irq_en;
-	u32 status;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 	u32 s_irq_status;
 
 	irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
@@ -671,9 +727,7 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport)
 	irq_en &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
 	writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
 
-	status = readl(uport->membase + SE_GENI_STATUS);
-	/* Possible stop rx is called multiple times. */
-	if (!(status & S_GENI_CMD_ACTIVE))
+	if (!qcom_geni_serial_secondary_active(uport))
 		return;
 
 	geni_se_cancel_s_cmd(&port->se);
@@ -686,52 +740,154 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport)
 	s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
 	/* Flush the Rx buffer */
 	if (s_irq_status & S_RX_FIFO_LAST_EN)
-		qcom_geni_serial_handle_rx(uport, true);
+		qcom_geni_serial_handle_rx_fifo(uport, true);
 	writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR);
 
-	status = readl(uport->membase + SE_GENI_STATUS);
-	if (status & S_GENI_CMD_ACTIVE)
+	if (qcom_geni_serial_secondary_active(uport))
 		qcom_geni_serial_abort_rx(uport);
 }
 
-static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop)
+static void qcom_geni_serial_start_rx_fifo(struct uart_port *uport)
 {
-	u32 status;
-	u32 word_cnt;
-	u32 last_word_byte_cnt;
-	u32 last_word_partial;
-	u32 total_bytes;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	u32 irq_en;
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 
-	status = readl(uport->membase +	SE_GENI_RX_FIFO_STATUS);
-	word_cnt = status & RX_FIFO_WC_MSK;
-	last_word_partial = status & RX_LAST;
-	last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >>
-						RX_LAST_BYTE_VALID_SHFT;
+	if (qcom_geni_serial_secondary_active(uport))
+		qcom_geni_serial_stop_rx_fifo(uport);
 
-	if (!word_cnt)
+	geni_se_setup_s_cmd(&port->se, UART_START_READ, 0);
+
+	irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
+	irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN;
+	writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
+
+	irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
+	irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
+	writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
+}
+
+static void qcom_geni_serial_stop_rx_dma(struct uart_port *uport)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+
+	if (!qcom_geni_serial_secondary_active(uport))
 		return;
-	total_bytes = BYTES_PER_FIFO_WORD * (word_cnt - 1);
-	if (last_word_partial && last_word_byte_cnt)
-		total_bytes += last_word_byte_cnt;
-	else
-		total_bytes += BYTES_PER_FIFO_WORD;
-	port->handle_rx(uport, total_bytes, drop);
+
+	geni_se_cancel_s_cmd(&port->se);
+	qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
+				  S_CMD_CANCEL_EN, true);
+
+	if (qcom_geni_serial_secondary_active(uport))
+		qcom_geni_serial_abort_rx(uport);
+
+	if (port->rx_dma_addr) {
+		geni_se_rx_dma_unprep(&port->se, port->rx_dma_addr,
+				      DMA_RX_BUF_SIZE);
+		port->rx_dma_addr = 0;
+	}
+}
+
+static void qcom_geni_serial_start_rx_dma(struct uart_port *uport)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+	int ret;
+
+	if (qcom_geni_serial_secondary_active(uport))
+		qcom_geni_serial_stop_rx_dma(uport);
+
+	geni_se_setup_s_cmd(&port->se, UART_START_READ, UART_PARAM_RFR_OPEN);
+
+	ret = geni_se_rx_dma_prep(&port->se, port->rx_buf,
+				  DMA_RX_BUF_SIZE,
+				  &port->rx_dma_addr);
+	if (ret) {
+		dev_err(uport->dev, "unable to start RX SE DMA: %d\n", ret);
+		qcom_geni_serial_stop_rx_dma(uport);
+	}
+}
+
+static void qcom_geni_serial_handle_rx_dma(struct uart_port *uport, bool drop)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+	u32 rx_in;
+	int ret;
+
+	if (!qcom_geni_serial_secondary_active(uport))
+		return;
+
+	if (!port->rx_dma_addr)
+		return;
+
+	geni_se_rx_dma_unprep(&port->se, port->rx_dma_addr, DMA_RX_BUF_SIZE);
+	port->rx_dma_addr = 0;
+
+	rx_in = readl(uport->membase + SE_DMA_RX_LEN_IN);
+	if (!rx_in) {
+		dev_warn(uport->dev, "serial engine reports 0 RX bytes in!\n");
+		return;
+	}
+
+	if (!drop)
+		handle_rx_uart(uport, rx_in, drop);
+
+	ret = geni_se_rx_dma_prep(&port->se, port->rx_buf,
+				  DMA_RX_BUF_SIZE,
+				  &port->rx_dma_addr);
+	if (ret) {
+		dev_err(uport->dev, "unable to start RX SE DMA: %d\n", ret);
+		qcom_geni_serial_stop_rx_dma(uport);
+	}
+}
+
+static void qcom_geni_serial_start_rx(struct uart_port *uport)
+{
+	uport->ops->start_rx(uport);
+}
+
+static void qcom_geni_serial_stop_rx(struct uart_port *uport)
+{
+	uport->ops->stop_rx(uport);
+}
+
+static void qcom_geni_serial_stop_tx(struct uart_port *uport)
+{
+	uport->ops->stop_tx(uport);
+}
+
+static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport,
+					     unsigned int chunk)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+	struct circ_buf *xmit = &uport->state->xmit;
+	unsigned int tx_bytes, c, remaining = chunk;
+	u8 buf[BYTES_PER_FIFO_WORD];
+
+	while (remaining) {
+		memset(buf, 0, sizeof(buf));
+		tx_bytes = min(remaining, BYTES_PER_FIFO_WORD);
+
+		for (c = 0; c < tx_bytes ; c++) {
+			buf[c] = xmit->buf[xmit->tail];
+			uart_xmit_advance(uport, 1);
+		}
+
+		iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
+
+		remaining -= tx_bytes;
+		port->tx_remaining -= tx_bytes;
+	}
 }
 
-static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
-		bool active)
+static void qcom_geni_serial_handle_tx_fifo(struct uart_port *uport,
+					    bool done, bool active)
 {
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 	struct circ_buf *xmit = &uport->state->xmit;
 	size_t avail;
-	size_t remaining;
 	size_t pending;
-	int i;
 	u32 status;
 	u32 irq_en;
 	unsigned int chunk;
-	int tail;
 
 	status = readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
 
@@ -743,14 +899,13 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
 
 	/* All data has been transmitted and acknowledged as received */
 	if (!pending && !status && done) {
-		qcom_geni_serial_stop_tx(uport);
+		qcom_geni_serial_stop_tx_fifo(uport);
 		goto out_write_wakeup;
 	}
 
 	avail = port->tx_fifo_depth - (status & TX_FIFO_WC);
 	avail *= BYTES_PER_FIFO_WORD;
 
-	tail = xmit->tail;
 	chunk = min(avail, pending);
 	if (!chunk)
 		goto out_write_wakeup;
@@ -765,29 +920,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
 					uport->membase + SE_GENI_M_IRQ_EN);
 	}
 
-	remaining = chunk;
-	for (i = 0; i < chunk; ) {
-		unsigned int tx_bytes;
-		u8 buf[sizeof(u32)];
-		int c;
-
-		memset(buf, 0, sizeof(buf));
-		tx_bytes = min_t(size_t, remaining, BYTES_PER_FIFO_WORD);
-
-		for (c = 0; c < tx_bytes ; c++) {
-			buf[c] = xmit->buf[tail++];
-			tail &= UART_XMIT_SIZE - 1;
-		}
-
-		iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
-
-		i += tx_bytes;
-		uport->icount.tx += tx_bytes;
-		remaining -= tx_bytes;
-		port->tx_remaining -= tx_bytes;
-	}
-
-	xmit->tail = tail;
+	qcom_geni_serial_send_chunk_fifo(uport, chunk);
 
 	/*
 	 * The tx fifo watermark is level triggered and latched. Though we had
@@ -809,16 +942,36 @@ out_write_wakeup:
 		uart_write_wakeup(uport);
 }
 
+static void qcom_geni_serial_handle_tx_dma(struct uart_port *uport)
+{
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
+	struct circ_buf *xmit = &uport->state->xmit;
+
+	uart_xmit_advance(uport, port->tx_remaining);
+	geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, port->tx_remaining);
+	port->tx_dma_addr = 0;
+	port->tx_remaining = 0;
+
+	if (!uart_circ_empty(xmit))
+		qcom_geni_serial_start_tx_dma(uport);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(uport);
+}
+
 static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
 {
 	u32 m_irq_en;
 	u32 m_irq_status;
 	u32 s_irq_status;
 	u32 geni_status;
+	u32 dma;
+	u32 dma_tx_status;
+	u32 dma_rx_status;
 	struct uart_port *uport = dev;
 	bool drop_rx = false;
 	struct tty_port *tport = &uport->state->port;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 
 	if (uport->suspended)
 		return IRQ_NONE;
@@ -827,10 +980,15 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
 
 	m_irq_status = readl(uport->membase + SE_GENI_M_IRQ_STATUS);
 	s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
+	dma_tx_status = readl(uport->membase + SE_DMA_TX_IRQ_STAT);
+	dma_rx_status = readl(uport->membase + SE_DMA_RX_IRQ_STAT);
 	geni_status = readl(uport->membase + SE_GENI_STATUS);
+	dma = readl(uport->membase + SE_GENI_DMA_MODE_EN);
 	m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
 	writel(m_irq_status, uport->membase + SE_GENI_M_IRQ_CLEAR);
 	writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR);
+	writel(dma_tx_status, uport->membase + SE_DMA_TX_IRQ_CLR);
+	writel(dma_rx_status, uport->membase + SE_DMA_RX_IRQ_CLR);
 
 	if (WARN_ON(m_irq_status & M_ILLEGAL_CMD_EN))
 		goto out_unlock;
@@ -840,23 +998,44 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
 		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 	}
 
-	if (m_irq_status & m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN))
-		qcom_geni_serial_handle_tx(uport, m_irq_status & M_CMD_DONE_EN,
-					geni_status & M_GENI_CMD_ACTIVE);
-
-	if (s_irq_status & S_GP_IRQ_0_EN || s_irq_status & S_GP_IRQ_1_EN) {
+	if (s_irq_status & (S_GP_IRQ_0_EN | S_GP_IRQ_1_EN)) {
 		if (s_irq_status & S_GP_IRQ_0_EN)
 			uport->icount.parity++;
 		drop_rx = true;
-	} else if (s_irq_status & S_GP_IRQ_2_EN ||
-					s_irq_status & S_GP_IRQ_3_EN) {
+	} else if (s_irq_status & (S_GP_IRQ_2_EN | S_GP_IRQ_3_EN)) {
 		uport->icount.brk++;
 		port->brk = true;
 	}
 
-	if (s_irq_status & S_RX_FIFO_WATERMARK_EN ||
-					s_irq_status & S_RX_FIFO_LAST_EN)
-		qcom_geni_serial_handle_rx(uport, drop_rx);
+	if (dma) {
+		if (dma_tx_status & TX_DMA_DONE)
+			qcom_geni_serial_handle_tx_dma(uport);
+
+		if (dma_rx_status) {
+			if (dma_rx_status & RX_RESET_DONE)
+				goto out_unlock;
+
+			if (dma_rx_status & RX_DMA_PARITY_ERR) {
+				uport->icount.parity++;
+				drop_rx = true;
+			}
+
+			if (dma_rx_status & RX_DMA_BREAK)
+				uport->icount.brk++;
+
+			if (dma_rx_status & (RX_DMA_DONE | RX_EOT))
+				qcom_geni_serial_handle_rx_dma(uport, drop_rx);
+		}
+	} else {
+		if (m_irq_status & m_irq_en &
+		    (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN))
+			qcom_geni_serial_handle_tx_fifo(uport,
+					m_irq_status & M_CMD_DONE_EN,
+					geni_status & M_GENI_CMD_ACTIVE);
+
+		if (s_irq_status & (S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN))
+			qcom_geni_serial_handle_rx_fifo(uport, drop_rx);
+	}
 
 out_unlock:
 	uart_unlock_and_check_sysrq(uport);
@@ -876,11 +1055,11 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
 	uport->fifosize =
 		(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
 
-	if (port->rx_fifo && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
-		port->rx_fifo = devm_krealloc(uport->dev, port->rx_fifo,
-					      port->rx_fifo_depth * sizeof(u32),
-					      GFP_KERNEL);
-		if (!port->rx_fifo)
+	if (port->rx_buf && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
+		port->rx_buf = devm_krealloc(uport->dev, port->rx_buf,
+					     port->rx_fifo_depth * sizeof(u32),
+					     GFP_KERNEL);
+		if (!port->rx_buf)
 			return -ENOMEM;
 	}
 
@@ -891,11 +1070,13 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
 static void qcom_geni_serial_shutdown(struct uart_port *uport)
 {
 	disable_irq(uport->irq);
+	qcom_geni_serial_stop_tx(uport);
+	qcom_geni_serial_stop_rx(uport);
 }
 
 static int qcom_geni_serial_port_setup(struct uart_port *uport)
 {
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 	u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
 	u32 proto;
 	u32 pin_swap;
@@ -937,7 +1118,7 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 	geni_se_config_packing(&port->se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD,
 			       false, true, true);
 	geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2);
-	geni_se_select_mode(&port->se, GENI_SE_FIFO);
+	geni_se_select_mode(&port->se, port->dev_data->mode);
 	qcom_geni_serial_start_rx(uport);
 	port->setup = true;
 
@@ -947,7 +1128,7 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 static int qcom_geni_serial_startup(struct uart_port *uport)
 {
 	int ret;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 
 	if (!port->setup) {
 		ret = qcom_geni_serial_port_setup(uport);
@@ -1033,7 +1214,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 	u32 stop_bit_len;
 	unsigned int clk_div;
 	u32 ser_clk_cfg;
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 	unsigned long clk_rate;
 	u32 ver, sampling_rate;
 	unsigned int avg_bw_core;
@@ -1137,11 +1318,6 @@ out_restart_rx:
 	qcom_geni_serial_start_rx(uport);
 }
 
-static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
-{
-	return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
-}
-
 #ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
 static int qcom_geni_console_setup(struct console *co, char *options)
 {
@@ -1323,7 +1499,7 @@ static struct uart_driver qcom_geni_uart_driver = {
 static void qcom_geni_serial_pm(struct uart_port *uport,
 		unsigned int new_state, unsigned int old_state)
 {
-	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+	struct qcom_geni_serial_port *port = to_dev_port(uport);
 
 	/* If we've never been called, treat it as off */
 	if (old_state == UART_PM_STATE_UNDEFINED)
@@ -1341,10 +1517,10 @@ static void qcom_geni_serial_pm(struct uart_port *uport,
 
 static const struct uart_ops qcom_geni_console_pops = {
 	.tx_empty = qcom_geni_serial_tx_empty,
-	.stop_tx = qcom_geni_serial_stop_tx,
-	.start_tx = qcom_geni_serial_start_tx,
-	.stop_rx = qcom_geni_serial_stop_rx,
-	.start_rx = qcom_geni_serial_start_rx,
+	.stop_tx = qcom_geni_serial_stop_tx_fifo,
+	.start_tx = qcom_geni_serial_start_tx_fifo,
+	.stop_rx = qcom_geni_serial_stop_rx_fifo,
+	.start_rx = qcom_geni_serial_start_rx_fifo,
 	.set_termios = qcom_geni_serial_set_termios,
 	.startup = qcom_geni_serial_startup,
 	.request_port = qcom_geni_serial_request_port,
@@ -1362,9 +1538,10 @@ static const struct uart_ops qcom_geni_console_pops = {
 
 static const struct uart_ops qcom_geni_uart_pops = {
 	.tx_empty = qcom_geni_serial_tx_empty,
-	.stop_tx = qcom_geni_serial_stop_tx,
-	.start_tx = qcom_geni_serial_start_tx,
-	.stop_rx = qcom_geni_serial_stop_rx,
+	.stop_tx = qcom_geni_serial_stop_tx_dma,
+	.start_tx = qcom_geni_serial_start_tx_dma,
+	.start_rx = qcom_geni_serial_start_rx_dma,
+	.stop_rx = qcom_geni_serial_stop_rx_dma,
 	.set_termios = qcom_geni_serial_set_termios,
 	.startup = qcom_geni_serial_startup,
 	.request_port = qcom_geni_serial_request_port,
@@ -1384,13 +1561,14 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	struct uart_port *uport;
 	struct resource *res;
 	int irq;
-	bool console = false;
 	struct uart_driver *drv;
+	const struct qcom_geni_device_data *data;
 
-	if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart"))
-		console = true;
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data)
+		return -EINVAL;
 
-	if (console) {
+	if (data->console) {
 		drv = &qcom_geni_console_driver;
 		line = of_alias_get_id(pdev->dev.of_node, "serial");
 	} else {
@@ -1400,7 +1578,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 			line = of_alias_get_id(pdev->dev.of_node, "hsuart");
 	}
 
-	port = get_port_from_line(line, console);
+	port = get_port_from_line(line, data->console);
 	if (IS_ERR(port)) {
 		dev_err(&pdev->dev, "Invalid line %d\n", line);
 		return PTR_ERR(port);
@@ -1412,6 +1590,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	uport->dev = &pdev->dev;
+	port->dev_data = data;
 	port->se.dev = &pdev->dev;
 	port->se.wrapper = dev_get_drvdata(pdev->dev.parent);
 	port->se.clk = devm_clk_get(&pdev->dev, "se");
@@ -1430,10 +1609,10 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
 	port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
 
-	if (!console) {
-		port->rx_fifo = devm_kcalloc(uport->dev,
-			port->rx_fifo_depth, sizeof(u32), GFP_KERNEL);
-		if (!port->rx_fifo)
+	if (!data->console) {
+		port->rx_buf = devm_kzalloc(uport->dev,
+					    DMA_RX_BUF_SIZE, GFP_KERNEL);
+		if (!port->rx_buf)
 			return -ENOMEM;
 	}
 
@@ -1460,7 +1639,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	uport->irq = irq;
 	uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_QCOM_GENI_CONSOLE);
 
-	if (!console)
+	if (!data->console)
 		port->wakeup_irq = platform_get_irq_optional(pdev, 1);
 
 	if (of_property_read_bool(pdev->dev.of_node, "rx-tx-swap"))
@@ -1482,7 +1661,6 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	port->private_data.drv = drv;
 	uport->private_data = &port->private_data;
 	platform_set_drvdata(pdev, port);
-	port->handle_rx = console ? handle_rx_console : handle_rx_uart;
 
 	ret = uart_add_one_port(drv, uport);
 	if (ret)
@@ -1594,6 +1772,16 @@ static int qcom_geni_serial_sys_hib_resume(struct device *dev)
 	return ret;
 }
 
+static const struct qcom_geni_device_data qcom_geni_console_data = {
+	.console = true,
+	.mode = GENI_SE_FIFO,
+};
+
+static const struct qcom_geni_device_data qcom_geni_uart_data = {
+	.console = false,
+	.mode = GENI_SE_DMA,
+};
+
 static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
 	.suspend = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
 	.resume = pm_sleep_ptr(qcom_geni_serial_sys_resume),
@@ -1604,8 +1792,14 @@ static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
 };
 
 static const struct of_device_id qcom_geni_serial_match_table[] = {
-	{ .compatible = "qcom,geni-debug-uart", },
-	{ .compatible = "qcom,geni-uart", },
+	{
+		.compatible = "qcom,geni-debug-uart",
+		.data = &qcom_geni_console_data,
+	},
+	{
+		.compatible = "qcom,geni-uart",
+		.data = &qcom_geni_uart_data,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table);
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 39f92eb1e698..29c94be09159 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1423,25 +1423,6 @@ static int sc16is7xx_probe(struct device *dev,
 	}
 	sched_set_fifo(s->kworker_task);
 
-#ifdef CONFIG_GPIOLIB
-	if (devtype->nr_gpio) {
-		/* Setup GPIO cotroller */
-		s->gpio.owner		 = THIS_MODULE;
-		s->gpio.parent		 = dev;
-		s->gpio.label		 = dev_name(dev);
-		s->gpio.direction_input	 = sc16is7xx_gpio_direction_input;
-		s->gpio.get		 = sc16is7xx_gpio_get;
-		s->gpio.direction_output = sc16is7xx_gpio_direction_output;
-		s->gpio.set		 = sc16is7xx_gpio_set;
-		s->gpio.base		 = -1;
-		s->gpio.ngpio		 = devtype->nr_gpio;
-		s->gpio.can_sleep	 = 1;
-		ret = gpiochip_add_data(&s->gpio, s);
-		if (ret)
-			goto out_thread;
-	}
-#endif
-
 	/* reset device, purging any pending irq / data */
 	regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT,
 			SC16IS7XX_IOCONTROL_SRESET_BIT);
@@ -1518,6 +1499,25 @@ static int sc16is7xx_probe(struct device *dev,
 				s->p[u].irda_mode = true;
 	}
 
+#ifdef CONFIG_GPIOLIB
+	if (devtype->nr_gpio) {
+		/* Setup GPIO cotroller */
+		s->gpio.owner		 = THIS_MODULE;
+		s->gpio.parent		 = dev;
+		s->gpio.label		 = dev_name(dev);
+		s->gpio.direction_input	 = sc16is7xx_gpio_direction_input;
+		s->gpio.get		 = sc16is7xx_gpio_get;
+		s->gpio.direction_output = sc16is7xx_gpio_direction_output;
+		s->gpio.set		 = sc16is7xx_gpio_set;
+		s->gpio.base		 = -1;
+		s->gpio.ngpio		 = devtype->nr_gpio;
+		s->gpio.can_sleep	 = 1;
+		ret = gpiochip_add_data(&s->gpio, s);
+		if (ret)
+			goto out_thread;
+	}
+#endif
+
 	/*
 	 * Setup interrupt. We first try to acquire the IRQ line as level IRQ.
 	 * If that succeeds, we can allow sharing the interrupt as well.
@@ -1537,18 +1537,19 @@ static int sc16is7xx_probe(struct device *dev,
 	if (!ret)
 		return 0;
 
-out_ports:
-	for (i--; i >= 0; i--) {
-		uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
-		clear_bit(s->p[i].port.line, &sc16is7xx_lines);
-	}
-
 #ifdef CONFIG_GPIOLIB
 	if (devtype->nr_gpio)
 		gpiochip_remove(&s->gpio);
 
 out_thread:
 #endif
+
+out_ports:
+	for (i--; i >= 0; i--) {
+		uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
+		clear_bit(s->p[i].port.line, &sc16is7xx_lines);
+	}
+
 	kthread_stop(s->kworker_task);
 
 out_clk:
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index 7df687822634..4f2fc5f7bb19 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -913,23 +913,13 @@ static int sccnxp_probe(struct platform_device *pdev)
 	} else if (PTR_ERR(s->regulator) == -EPROBE_DEFER)
 		return -EPROBE_DEFER;
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		ret = PTR_ERR(clk);
 		if (ret == -EPROBE_DEFER)
 			goto err_out;
 		uartclk = 0;
 	} else {
-		ret = clk_prepare_enable(clk);
-		if (ret)
-			goto err_out;
-
-		ret = devm_add_action_or_reset(&pdev->dev,
-				(void(*)(void *))clk_disable_unprepare,
-				clk);
-		if (ret)
-			goto err_out;
-
 		uartclk = clk_get_rate(clk);
 	}
 
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index e5b9773db5e3..1cf08b33456c 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1046,6 +1046,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	if (tup->cdata->fifo_mode_enable_status) {
 		ret = tegra_uart_wait_fifo_mode_enabled(tup);
 		if (ret < 0) {
+			clk_disable_unprepare(tup->uart_clk);
 			dev_err(tup->uport.dev,
 				"Failed to enable FIFO mode: %d\n", ret);
 			return ret;
@@ -1067,6 +1068,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	 */
 	ret = tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD);
 	if (ret < 0) {
+		clk_disable_unprepare(tup->uart_clk);
 		dev_err(tup->uport.dev, "Failed to set baud rate\n");
 		return ret;
 	}
@@ -1226,10 +1228,13 @@ static int tegra_uart_startup(struct uart_port *u)
 				dev_name(u->dev), tup);
 	if (ret < 0) {
 		dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq);
-		goto fail_hw_init;
+		goto fail_request_irq;
 	}
 	return 0;
 
+fail_request_irq:
+	/* tup->uart_clk is already enabled in tegra_uart_hw_init */
+	clk_disable_unprepare(tup->uart_clk);
 fail_hw_init:
 	if (!tup->use_rx_pio)
 		tegra_uart_dma_channel_free(tup, true);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index ec874f3a567c..2bd32c8ece39 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -169,9 +169,9 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
 #define uart_set_mctrl(port, set)	uart_update_mctrl(port, set, 0)
 #define uart_clear_mctrl(port, clear)	uart_update_mctrl(port, 0, clear)
 
-static void uart_port_dtr_rts(struct uart_port *uport, int raise)
+static void uart_port_dtr_rts(struct uart_port *uport, bool active)
 {
-	if (raise)
+	if (active)
 		uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 	else
 		uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
@@ -182,7 +182,7 @@ static void uart_port_dtr_rts(struct uart_port *uport, int raise)
  * will be serialised by the per-port mutex.
  */
 static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
-		int init_hw)
+			     bool init_hw)
 {
 	struct uart_port *uport = uart_port_check(state);
 	unsigned long flags;
@@ -239,7 +239,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
 		 * port is open and ready to respond.
 		 */
 		if (init_hw && C_BAUD(tty))
-			uart_port_dtr_rts(uport, 1);
+			uart_port_dtr_rts(uport, true);
 	}
 
 	/*
@@ -254,7 +254,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
 }
 
 static int uart_startup(struct tty_struct *tty, struct uart_state *state,
-		int init_hw)
+			bool init_hw)
 {
 	struct tty_port *port = &state->port;
 	int retval;
@@ -290,7 +290,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 
 	if (tty_port_initialized(port)) {
-		tty_port_set_initialized(port, 0);
+		tty_port_set_initialized(port, false);
 
 		/*
 		 * Turn off DTR and RTS early.
@@ -302,7 +302,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 		}
 
 		if (!tty || C_HUPCL(tty))
-			uart_port_dtr_rts(uport, 0);
+			uart_port_dtr_rts(uport, false);
 
 		uart_port_shutdown(port);
 	}
@@ -312,7 +312,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 	 * a DCD drop (hangup) at just the right time.  Clear suspended bit so
 	 * we don't try to resume a port that has been shutdown.
 	 */
-	tty_port_set_suspended(port, 0);
+	tty_port_set_suspended(port, false);
 
 	/*
 	 * Do not free() the transmit buffer page under the port lock since
@@ -997,7 +997,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
 			uart_change_speed(tty, state, NULL);
 		}
 	} else {
-		retval = uart_startup(tty, state, 1);
+		retval = uart_startup(tty, state, true);
 		if (retval == 0)
 			tty_port_set_initialized(port, true);
 		if (retval > 0)
@@ -1165,7 +1165,7 @@ static int uart_do_autoconfig(struct tty_struct *tty, struct uart_state *state)
 		 */
 		uport->ops->config_port(uport, flags);
 
-		ret = uart_startup(tty, state, 1);
+		ret = uart_startup(tty, state, true);
 		if (ret == 0)
 			tty_port_set_initialized(port, true);
 		if (ret > 0)
@@ -1725,7 +1725,7 @@ static void uart_tty_port_shutdown(struct tty_port *port)
 	 * a DCD drop (hangup) at just the right time.  Clear suspended bit so
 	 * we don't try to resume a port that has been shutdown.
 	 */
-	tty_port_set_suspended(port, 0);
+	tty_port_set_suspended(port, false);
 
 	/*
 	 * Free the transmit buffer.
@@ -1827,7 +1827,7 @@ static void uart_hangup(struct tty_struct *tty)
 		spin_lock_irqsave(&port->lock, flags);
 		port->count = 0;
 		spin_unlock_irqrestore(&port->lock, flags);
-		tty_port_set_active(port, 0);
+		tty_port_set_active(port, false);
 		tty_port_tty_set(port, NULL);
 		if (uport && !uart_console(uport))
 			uart_change_pm(state, UART_PM_STATE_OFF);
@@ -1861,7 +1861,7 @@ static void uart_port_shutdown(struct tty_port *port)
 	}
 }
 
-static int uart_carrier_raised(struct tty_port *port)
+static bool uart_carrier_raised(struct tty_port *port)
 {
 	struct uart_state *state = container_of(port, struct uart_state, port);
 	struct uart_port *uport;
@@ -1875,18 +1875,17 @@ static int uart_carrier_raised(struct tty_port *port)
 	 * continue and not sleep
 	 */
 	if (WARN_ON(!uport))
-		return 1;
+		return true;
 	spin_lock_irq(&uport->lock);
 	uart_enable_ms(uport);
 	mctrl = uport->ops->get_mctrl(uport);
 	spin_unlock_irq(&uport->lock);
 	uart_port_deref(uport);
-	if (mctrl & TIOCM_CAR)
-		return 1;
-	return 0;
+
+	return mctrl & TIOCM_CAR;
 }
 
-static void uart_dtr_rts(struct tty_port *port, int raise)
+static void uart_dtr_rts(struct tty_port *port, bool active)
 {
 	struct uart_state *state = container_of(port, struct uart_state, port);
 	struct uart_port *uport;
@@ -1894,7 +1893,7 @@ static void uart_dtr_rts(struct tty_port *port, int raise)
 	uport = uart_port_ref(state);
 	if (!uport)
 		return;
-	uart_port_dtr_rts(uport, raise);
+	uart_port_dtr_rts(uport, active);
 	uart_port_deref(uport);
 }
 
@@ -1943,9 +1942,9 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty)
 	/*
 	 * Start up the serial port.
 	 */
-	ret = uart_startup(tty, state, 0);
+	ret = uart_startup(tty, state, false);
 	if (ret > 0)
-		tty_port_set_active(port, 1);
+		tty_port_set_active(port, true);
 
 	return ret;
 }
@@ -2349,8 +2348,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 		int tries;
 		unsigned int mctrl;
 
-		tty_port_set_suspended(port, 1);
-		tty_port_set_initialized(port, 0);
+		tty_port_set_suspended(port, true);
+		tty_port_set_initialized(port, false);
 
 		spin_lock_irq(&uport->lock);
 		ops->stop_tx(uport);
@@ -2461,7 +2460,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 					uart_rs485_config(uport);
 				ops->start_tx(uport);
 				spin_unlock_irq(&uport->lock);
-				tty_port_set_initialized(port, 1);
+				tty_port_set_initialized(port, true);
 			} else {
 				/*
 				 * Failed to resume - maybe hardware went away?
@@ -2472,7 +2471,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 			}
 		}
 
-		tty_port_set_suspended(port, 0);
+		tty_port_set_suspended(port, false);
 	}
 
 	mutex_unlock(&port->mutex);
@@ -3258,11 +3257,11 @@ EXPORT_SYMBOL(uart_match_port);
 /**
  * uart_handle_dcd_change - handle a change of carrier detect state
  * @uport: uart_port structure for the open port
- * @status: new carrier detect status, nonzero if active
+ * @active: new carrier detect status
  *
  * Caller must hold uport->lock.
  */
-void uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
+void uart_handle_dcd_change(struct uart_port *uport, bool active)
 {
 	struct tty_port *port = &uport->state->port;
 	struct tty_struct *tty = port->tty;
@@ -3274,7 +3273,7 @@ void uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 		ld = tty_ldisc_ref(tty);
 		if (ld) {
 			if (ld->ops->dcd_change)
-				ld->ops->dcd_change(tty, status);
+				ld->ops->dcd_change(tty, active);
 			tty_ldisc_deref(ld);
 		}
 	}
@@ -3282,7 +3281,7 @@ void uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 	uport->icount.dcd++;
 
 	if (uart_dcd_enabled(uport)) {
-		if (status)
+		if (active)
 			wake_up_interruptible(&port->open_wait);
 		else if (tty)
 			tty_hangup(tty);
@@ -3293,11 +3292,11 @@ EXPORT_SYMBOL_GPL(uart_handle_dcd_change);
 /**
  * uart_handle_cts_change - handle a change of clear-to-send state
  * @uport: uart_port structure for the open port
- * @status: new clear to send status, nonzero if active
+ * @active: new clear-to-send status
  *
  * Caller must hold uport->lock.
  */
-void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
+void uart_handle_cts_change(struct uart_port *uport, bool active)
 {
 	lockdep_assert_held_once(&uport->lock);
 
@@ -3305,13 +3304,13 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
 
 	if (uart_softcts_mode(uport)) {
 		if (uport->hw_stopped) {
-			if (status) {
+			if (active) {
 				uport->hw_stopped = 0;
 				uport->ops->start_tx(uport);
 				uart_write_wakeup(uport);
 			}
 		} else {
-			if (!status) {
+			if (!active) {
 				uport->hw_stopped = 1;
 				uport->ops->stop_tx(uport);
 			}
@@ -3415,6 +3414,7 @@ int uart_get_rs485_mode(struct uart_port *port)
 	struct device *dev = port->dev;
 	u32 rs485_delay[2];
 	int ret;
+	int rx_during_tx_gpio_flag;
 
 	ret = device_property_read_u32_array(dev, "rs485-rts-delay",
 					     rs485_delay, 2);
@@ -3463,6 +3463,17 @@ int uart_get_rs485_mode(struct uart_port *port)
 	if (port->rs485_term_gpio)
 		port->rs485_supported.flags |= SER_RS485_TERMINATE_BUS;
 
+	rx_during_tx_gpio_flag = (rs485conf->flags & SER_RS485_RX_DURING_TX) ?
+				 GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	port->rs485_rx_during_tx_gpio = devm_gpiod_get_optional(dev,
+								"rs485-rx-during-tx",
+								rx_during_tx_gpio_flag);
+	if (IS_ERR(port->rs485_rx_during_tx_gpio)) {
+		ret = PTR_ERR(port->rs485_rx_during_tx_gpio);
+		port->rs485_rx_during_tx_gpio = NULL;
+		return dev_err_probe(dev, ret, "Cannot get rs485-rx-during-tx-gpios\n");
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(uart_get_rs485_mode);
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 409e91d6829a..767ff9fdb2e5 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -226,7 +226,11 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter
 
 	stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
 
-	rs485conf->flags |= SER_RS485_RX_DURING_TX;
+	if (port->rs485_rx_during_tx_gpio)
+		gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio,
+					 !!(rs485conf->flags & SER_RS485_RX_DURING_TX));
+	else
+		rs485conf->flags |= SER_RS485_RX_DURING_TX;
 
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		cr1 = readl_relaxed(port->membase + ofs->cr1);
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 16c746a63258..7d38c33ef506 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -87,10 +87,10 @@ static int receive_chars_getchar(struct uart_port *port)
 
 		if (c == CON_HUP) {
 			hung_up = 1;
-			uart_handle_dcd_change(port, 0);
+			uart_handle_dcd_change(port, false);
 		} else if (hung_up) {
 			hung_up = 0;
-			uart_handle_dcd_change(port, 1);
+			uart_handle_dcd_change(port, true);
 		}
 
 		if (port->state == NULL) {
@@ -133,7 +133,7 @@ static int receive_chars_read(struct uart_port *port)
 				bytes_read = 1;
 			} else if (stat == CON_HUP) {
 				hung_up = 1;
-				uart_handle_dcd_change(port, 0);
+				uart_handle_dcd_change(port, false);
 				continue;
 			} else {
 				/* HV_EWOULDBLOCK, etc.  */
@@ -143,7 +143,7 @@ static int receive_chars_read(struct uart_port *port)
 
 		if (hung_up) {
 			hung_up = 0;
-			uart_handle_dcd_change(port, 1);
+			uart_handle_dcd_change(port, true);
 		}
 
 		if (port->sysrq != 0 &&  *con_read_page) {
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index b09b6496ee3e..32c7a5b43f8e 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1468,6 +1468,8 @@ static int ucc_uart_remove(struct platform_device *ofdev)
 
 	uart_remove_one_port(&ucc_uart_driver, &qe_port->port);
 
+	of_node_put(qe_port->np);
+
 	kfree(qe_port);
 
 	return 0;
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 72b76cdde534..33f258d6fef9 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -694,7 +694,7 @@ static void hangup(struct tty_struct *tty)
 	info->port.count = 0;
 	info->port.tty = NULL;
 	spin_unlock_irqrestore(&info->port.lock, flags);
-	tty_port_set_active(&info->port, 0);
+	tty_port_set_active(&info->port, false);
 	mutex_unlock(&info->port.mutex);
 
 	wake_up_interruptible(&info->port.open_wait);
@@ -2354,7 +2354,7 @@ static int startup(struct slgt_info *info)
 	if (info->port.tty)
 		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	tty_port_set_initialized(&info->port, 1);
+	tty_port_set_initialized(&info->port, true);
 
 	return 0;
 }
@@ -2401,7 +2401,7 @@ static void shutdown(struct slgt_info *info)
 	if (info->port.tty)
 		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	tty_port_set_initialized(&info->port, 0);
+	tty_port_set_initialized(&info->port, false);
 }
 
 static void program_hw(struct slgt_info *info)
@@ -3126,7 +3126,7 @@ static int tiocmset(struct tty_struct *tty,
 	return 0;
 }
 
-static int carrier_raised(struct tty_port *port)
+static bool carrier_raised(struct tty_port *port)
 {
 	unsigned long flags;
 	struct slgt_info *info = container_of(port, struct slgt_info, port);
@@ -3134,16 +3134,17 @@ static int carrier_raised(struct tty_port *port)
 	spin_lock_irqsave(&info->lock,flags);
 	get_gtsignals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
-	return (info->signals & SerialSignal_DCD) ? 1 : 0;
+
+	return info->signals & SerialSignal_DCD;
 }
 
-static void dtr_rts(struct tty_port *port, int on)
+static void dtr_rts(struct tty_port *port, bool active)
 {
 	unsigned long flags;
 	struct slgt_info *info = container_of(port, struct slgt_info, port);
 
 	spin_lock_irqsave(&info->lock,flags);
-	if (on)
+	if (active)
 		info->signals |= SerialSignal_RTS | SerialSignal_DTR;
 	else
 		info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
@@ -3162,14 +3163,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	int		retval;
 	bool		do_clocal = false;
 	unsigned long	flags;
-	int		cd;
+	bool		cd;
 	struct tty_port *port = &info->port;
 
 	DBGINFO(("%s block_til_ready\n", tty->driver->name));
 
 	if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) {
 		/* nonblock mode is set or port is not enabled */
-		tty_port_set_active(port, 1);
+		tty_port_set_active(port, true);
 		return 0;
 	}
 
@@ -3226,7 +3227,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	port->blocked_open--;
 
 	if (!retval)
-		tty_port_set_active(port, 1);
+		tty_port_set_active(port, true);
 
 	DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
 	return retval;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 3149114bf130..36fb945fdad4 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1224,14 +1224,16 @@ static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
 {
 	struct tty_struct *tty;
 
-	if (driver->ops->lookup)
+	if (driver->ops->lookup) {
 		if (!file)
 			tty = ERR_PTR(-EIO);
 		else
 			tty = driver->ops->lookup(driver, file, idx);
-	else
+	} else {
+		if (idx >= driver->num)
+			return ERR_PTR(-EINVAL);
 		tty = driver->ttys[idx];
-
+	}
 	if (!IS_ERR(tty))
 		tty_kref_get(tty);
 	return tty;
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index ce511557b98b..12983ce4e43e 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -270,13 +270,13 @@ EXPORT_SYMBOL(tty_termios_copy_hw);
  *	between the two termios structures, or a speed change is needed.
  */
 
-int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b)
+bool tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b)
 {
 	if (a->c_ispeed != b->c_ispeed || a->c_ospeed != b->c_ospeed)
-		return 1;
+		return true;
 	if ((a->c_cflag ^ b->c_cflag) & ~(HUPCL | CREAD | CLOCAL))
-		return 1;
-	return 0;
+		return true;
+	return false;
 }
 EXPORT_SYMBOL(tty_termios_hw_change);
 
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index dce08a6d7b5e..a788a6bf487d 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -367,7 +367,7 @@ static void tty_port_shutdown(struct tty_port *port, struct tty_struct *tty)
 		goto out;
 
 	if (tty_port_initialized(port)) {
-		tty_port_set_initialized(port, 0);
+		tty_port_set_initialized(port, false);
 		/*
 		 * Drop DTR/RTS if HUPCL is set. This causes any attached
 		 * modem to hang up the line.
@@ -403,7 +403,7 @@ void tty_port_hangup(struct tty_port *port)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 	port->tty = NULL;
 	spin_unlock_irqrestore(&port->lock, flags);
-	tty_port_set_active(port, 0);
+	tty_port_set_active(port, false);
 	tty_port_shutdown(port, tty);
 	tty_kref_put(tty);
 	wake_up_interruptible(&port->open_wait);
@@ -444,10 +444,10 @@ EXPORT_SYMBOL_GPL(tty_port_tty_wakeup);
  * to hide some internal details. This will eventually become entirely
  * internal to the tty port.
  */
-int tty_port_carrier_raised(struct tty_port *port)
+bool tty_port_carrier_raised(struct tty_port *port)
 {
 	if (port->ops->carrier_raised == NULL)
-		return 1;
+		return true;
 	return port->ops->carrier_raised(port);
 }
 EXPORT_SYMBOL(tty_port_carrier_raised);
@@ -463,7 +463,7 @@ EXPORT_SYMBOL(tty_port_carrier_raised);
 void tty_port_raise_dtr_rts(struct tty_port *port)
 {
 	if (port->ops->dtr_rts)
-		port->ops->dtr_rts(port, 1);
+		port->ops->dtr_rts(port, true);
 }
 EXPORT_SYMBOL(tty_port_raise_dtr_rts);
 
@@ -478,7 +478,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts);
 void tty_port_lower_dtr_rts(struct tty_port *port)
 {
 	if (port->ops->dtr_rts)
-		port->ops->dtr_rts(port, 0);
+		port->ops->dtr_rts(port, false);
 }
 EXPORT_SYMBOL(tty_port_lower_dtr_rts);
 
@@ -518,14 +518,14 @@ int tty_port_block_til_ready(struct tty_port *port,
 	 * the port has just hung up or is in another error state.
 	 */
 	if (tty_io_error(tty)) {
-		tty_port_set_active(port, 1);
+		tty_port_set_active(port, true);
 		return 0;
 	}
 	if (filp == NULL || (filp->f_flags & O_NONBLOCK)) {
 		/* Indicate we are open */
 		if (C_BAUD(tty))
 			tty_port_raise_dtr_rts(port);
-		tty_port_set_active(port, 1);
+		tty_port_set_active(port, true);
 		return 0;
 	}
 
@@ -588,7 +588,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 	port->blocked_open--;
 	spin_unlock_irqrestore(&port->lock, flags);
 	if (retval == 0)
-		tty_port_set_active(port, 1);
+		tty_port_set_active(port, true);
 	return retval;
 }
 EXPORT_SYMBOL(tty_port_block_til_ready);
@@ -695,7 +695,7 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
 		wake_up_interruptible(&port->open_wait);
 	}
 	spin_unlock_irqrestore(&port->lock, flags);
-	tty_port_set_active(port, 0);
+	tty_port_set_active(port, false);
 }
 EXPORT_SYMBOL(tty_port_close_end);
 
@@ -788,7 +788,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty,
 				return retval;
 			}
 		}
-		tty_port_set_initialized(port, 1);
+		tty_port_set_initialized(port, true);
 	}
 	mutex_unlock(&port->mutex);
 	return tty_port_block_til_ready(port, tty, filp);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 981d2bfcf9a5..57a5c23b51d4 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -316,73 +316,55 @@ void schedule_console_callback(void)
  * Code to manage unicode-based screen buffers
  */
 
-#ifdef NO_VC_UNI_SCREEN
-/* this disables and optimizes related code away at compile time */
-#define get_vc_uniscr(vc) NULL
-#else
-#define get_vc_uniscr(vc) vc->vc_uni_screen
-#endif
-
-#define VC_UNI_SCREEN_DEBUG 0
-
-typedef uint32_t char32_t;
-
 /*
  * Our screen buffer is preceded by an array of line pointers so that
  * scrolling only implies some pointer shuffling.
  */
-struct uni_screen {
-	char32_t *lines[0];
-};
 
-static struct uni_screen *vc_uniscr_alloc(unsigned int cols, unsigned int rows)
+static u32 **vc_uniscr_alloc(unsigned int cols, unsigned int rows)
 {
-	struct uni_screen *uniscr;
+	u32 **uni_lines;
 	void *p;
-	unsigned int memsize, i;
+	unsigned int memsize, i, col_size = cols * sizeof(**uni_lines);
 
 	/* allocate everything in one go */
-	memsize = cols * rows * sizeof(char32_t);
-	memsize += rows * sizeof(char32_t *);
-	p = vzalloc(memsize);
-	if (!p)
+	memsize = col_size * rows;
+	memsize += rows * sizeof(*uni_lines);
+	uni_lines = vzalloc(memsize);
+	if (!uni_lines)
 		return NULL;
 
 	/* initial line pointers */
-	uniscr = p;
-	p = uniscr->lines + rows;
+	p = uni_lines + rows;
 	for (i = 0; i < rows; i++) {
-		uniscr->lines[i] = p;
-		p += cols * sizeof(char32_t);
+		uni_lines[i] = p;
+		p += col_size;
 	}
-	return uniscr;
+
+	return uni_lines;
 }
 
-static void vc_uniscr_free(struct uni_screen *uniscr)
+static void vc_uniscr_free(u32 **uni_lines)
 {
-	vfree(uniscr);
+	vfree(uni_lines);
 }
 
-static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr)
+static void vc_uniscr_set(struct vc_data *vc, u32 **new_uni_lines)
 {
-	vc_uniscr_free(vc->vc_uni_screen);
-	vc->vc_uni_screen = new_uniscr;
+	vc_uniscr_free(vc->vc_uni_lines);
+	vc->vc_uni_lines = new_uni_lines;
 }
 
-static void vc_uniscr_putc(struct vc_data *vc, char32_t uc)
+static void vc_uniscr_putc(struct vc_data *vc, u32 uc)
 {
-	struct uni_screen *uniscr = get_vc_uniscr(vc);
-
-	if (uniscr)
-		uniscr->lines[vc->state.y][vc->state.x] = uc;
+	if (vc->vc_uni_lines)
+		vc->vc_uni_lines[vc->state.y][vc->state.x] = uc;
 }
 
 static void vc_uniscr_insert(struct vc_data *vc, unsigned int nr)
 {
-	struct uni_screen *uniscr = get_vc_uniscr(vc);
-
-	if (uniscr) {
-		char32_t *ln = uniscr->lines[vc->state.y];
+	if (vc->vc_uni_lines) {
+		u32 *ln = vc->vc_uni_lines[vc->state.y];
 		unsigned int x = vc->state.x, cols = vc->vc_cols;
 
 		memmove(&ln[x + nr], &ln[x], (cols - x - nr) * sizeof(*ln));
@@ -392,10 +374,8 @@ static void vc_uniscr_insert(struct vc_data *vc, unsigned int nr)
 
 static void vc_uniscr_delete(struct vc_data *vc, unsigned int nr)
 {
-	struct uni_screen *uniscr = get_vc_uniscr(vc);
-
-	if (uniscr) {
-		char32_t *ln = uniscr->lines[vc->state.y];
+	if (vc->vc_uni_lines) {
+		u32 *ln = vc->vc_uni_lines[vc->state.y];
 		unsigned int x = vc->state.x, cols = vc->vc_cols;
 
 		memcpy(&ln[x], &ln[x + nr], (cols - x - nr) * sizeof(*ln));
@@ -406,86 +386,84 @@ static void vc_uniscr_delete(struct vc_data *vc, unsigned int nr)
 static void vc_uniscr_clear_line(struct vc_data *vc, unsigned int x,
 				 unsigned int nr)
 {
-	struct uni_screen *uniscr = get_vc_uniscr(vc);
-
-	if (uniscr) {
-		char32_t *ln = uniscr->lines[vc->state.y];
-
-		memset32(&ln[x], ' ', nr);
-	}
+	if (vc->vc_uni_lines)
+		memset32(&vc->vc_uni_lines[vc->state.y][x], ' ', nr);
 }
 
 static void vc_uniscr_clear_lines(struct vc_data *vc, unsigned int y,
 				  unsigned int nr)
 {
-	struct uni_screen *uniscr = get_vc_uniscr(vc);
+	if (vc->vc_uni_lines)
+		while (nr--)
+			memset32(vc->vc_uni_lines[y++], ' ', vc->vc_cols);
+}
+
+/* juggling array rotation algorithm (complexity O(N), size complexity O(1)) */
+static void juggle_array(u32 **array, unsigned int size, unsigned int nr)
+{
+	unsigned int gcd_idx;
 
-	if (uniscr) {
-		unsigned int cols = vc->vc_cols;
+	for (gcd_idx = 0; gcd_idx < gcd(nr, size); gcd_idx++) {
+		u32 *gcd_idx_val = array[gcd_idx];
+		unsigned int dst_idx = gcd_idx;
 
-		while (nr--)
-			memset32(uniscr->lines[y++], ' ', cols);
+		while (1) {
+			unsigned int src_idx = (dst_idx + nr) % size;
+			if (src_idx == gcd_idx)
+				break;
+
+			array[dst_idx] = array[src_idx];
+			dst_idx = src_idx;
+		}
+
+		array[dst_idx] = gcd_idx_val;
 	}
 }
 
-static void vc_uniscr_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
-			     enum con_scroll dir, unsigned int nr)
+static void vc_uniscr_scroll(struct vc_data *vc, unsigned int top,
+			     unsigned int bottom, enum con_scroll dir,
+			     unsigned int nr)
 {
-	struct uni_screen *uniscr = get_vc_uniscr(vc);
+	u32 **uni_lines = vc->vc_uni_lines;
+	unsigned int size = bottom - top;
 
-	if (uniscr) {
-		unsigned int i, j, k, sz, d, clear;
+	if (!uni_lines)
+		return;
 
-		sz = b - t;
-		clear = b - nr;
-		d = nr;
-		if (dir == SM_DOWN) {
-			clear = t;
-			d = sz - nr;
-		}
-		for (i = 0; i < gcd(d, sz); i++) {
-			char32_t *tmp = uniscr->lines[t + i];
-			j = i;
-			while (1) {
-				k = j + d;
-				if (k >= sz)
-					k -= sz;
-				if (k == i)
-					break;
-				uniscr->lines[t + j] = uniscr->lines[t + k];
-				j = k;
-			}
-			uniscr->lines[t + j] = tmp;
-		}
-		vc_uniscr_clear_lines(vc, clear, nr);
+	if (dir == SM_DOWN) {
+		juggle_array(&uni_lines[top], size, size - nr);
+		vc_uniscr_clear_lines(vc, top, nr);
+	} else {
+		juggle_array(&uni_lines[top], size, nr);
+		vc_uniscr_clear_lines(vc, bottom - nr, nr);
 	}
 }
 
-static void vc_uniscr_copy_area(struct uni_screen *dst,
+static void vc_uniscr_copy_area(u32 **dst_lines,
 				unsigned int dst_cols,
 				unsigned int dst_rows,
-				struct uni_screen *src,
+				u32 **src_lines,
 				unsigned int src_cols,
 				unsigned int src_top_row,
 				unsigned int src_bot_row)
 {
 	unsigned int dst_row = 0;
 
-	if (!dst)
+	if (!dst_lines)
 		return;
 
 	while (src_top_row < src_bot_row) {
-		char32_t *src_line = src->lines[src_top_row];
-		char32_t *dst_line = dst->lines[dst_row];
+		u32 *src_line = src_lines[src_top_row];
+		u32 *dst_line = dst_lines[dst_row];
 
-		memcpy(dst_line, src_line, src_cols * sizeof(char32_t));
+		memcpy(dst_line, src_line, src_cols * sizeof(*src_line));
 		if (dst_cols - src_cols)
 			memset32(dst_line + src_cols, ' ', dst_cols - src_cols);
 		src_top_row++;
 		dst_row++;
 	}
 	while (dst_row < dst_rows) {
-		char32_t *dst_line = dst->lines[dst_row];
+		u32 *dst_line = dst_lines[dst_row];
 
 		memset32(dst_line, ' ', dst_cols);
 		dst_row++;
@@ -500,23 +478,20 @@ static void vc_uniscr_copy_area(struct uni_screen *dst,
  */
 int vc_uniscr_check(struct vc_data *vc)
 {
-	struct uni_screen *uniscr;
+	u32 **uni_lines;
 	unsigned short *p;
 	int x, y, mask;
 
-	if (__is_defined(NO_VC_UNI_SCREEN))
-		return -EOPNOTSUPP;
-
 	WARN_CONSOLE_UNLOCKED();
 
 	if (!vc->vc_utf)
 		return -ENODATA;
 
-	if (vc->vc_uni_screen)
+	if (vc->vc_uni_lines)
 		return 0;
 
-	uniscr = vc_uniscr_alloc(vc->vc_cols, vc->vc_rows);
-	if (!uniscr)
+	uni_lines = vc_uniscr_alloc(vc->vc_cols, vc->vc_rows);
+	if (!uni_lines)
 		return -ENOMEM;
 
 	/*
@@ -528,14 +503,15 @@ int vc_uniscr_check(struct vc_data *vc)
 	p = (unsigned short *)vc->vc_origin;
 	mask = vc->vc_hi_font_mask | 0xff;
 	for (y = 0; y < vc->vc_rows; y++) {
-		char32_t *line = uniscr->lines[y];
+		u32 *line = uni_lines[y];
 		for (x = 0; x < vc->vc_cols; x++) {
 			u16 glyph = scr_readw(p++) & mask;
 			line[x] = inverse_translate(vc, glyph, true);
 		}
 	}
 
-	vc->vc_uni_screen = uniscr;
+	vc->vc_uni_lines = uni_lines;
+
 	return 0;
 }
 
@@ -547,11 +523,12 @@ int vc_uniscr_check(struct vc_data *vc)
 void vc_uniscr_copy_line(const struct vc_data *vc, void *dest, bool viewed,
 			 unsigned int row, unsigned int col, unsigned int nr)
 {
-	struct uni_screen *uniscr = get_vc_uniscr(vc);
+	u32 **uni_lines = vc->vc_uni_lines;
 	int offset = row * vc->vc_size_row + col * 2;
 	unsigned long pos;
 
-	BUG_ON(!uniscr);
+	if (WARN_ON_ONCE(!uni_lines))
+		return;
 
 	pos = (unsigned long)screenpos(vc, offset, viewed);
 	if (pos >= vc->vc_origin && pos < vc->vc_scr_end) {
@@ -562,7 +539,7 @@ void vc_uniscr_copy_line(const struct vc_data *vc, void *dest, bool viewed,
 		 */
 		row = (pos - vc->vc_origin) / vc->vc_size_row;
 		col = ((pos - vc->vc_origin) % vc->vc_size_row) / 2;
-		memcpy(dest, &uniscr->lines[row][col], nr * sizeof(char32_t));
+		memcpy(dest, &uni_lines[row][col], nr * sizeof(u32));
 	} else {
 		/*
 		 * Scrollback is active. For now let's simply backtranslate
@@ -572,7 +549,7 @@ void vc_uniscr_copy_line(const struct vc_data *vc, void *dest, bool viewed,
 		 */
 		u16 *p = (u16 *)pos;
 		int mask = vc->vc_hi_font_mask | 0xff;
-		char32_t *uni_buf = dest;
+		u32 *uni_buf = dest;
 		while (nr--) {
 			u16 glyph = scr_readw(p++) & mask;
 			*uni_buf++ = inverse_translate(vc, glyph, true);
@@ -580,64 +557,31 @@ void vc_uniscr_copy_line(const struct vc_data *vc, void *dest, bool viewed,
 	}
 }
 
-/* this is for validation and debugging only */
-static void vc_uniscr_debug_check(struct vc_data *vc)
+static void con_scroll(struct vc_data *vc, unsigned int top,
+		       unsigned int bottom, enum con_scroll dir,
+		       unsigned int nr)
 {
-	struct uni_screen *uniscr = get_vc_uniscr(vc);
-	unsigned short *p;
-	int x, y, mask;
+	unsigned int rows = bottom - top;
+	u16 *clear, *dst, *src;
 
-	if (!VC_UNI_SCREEN_DEBUG || !uniscr)
+	if (top + nr >= bottom)
+		nr = rows - 1;
+	if (bottom > vc->vc_rows || top >= bottom || nr < 1)
 		return;
 
-	WARN_CONSOLE_UNLOCKED();
-
-	/*
-	 * Make sure our unicode screen translates into the same glyphs
-	 * as the actual screen. This is brutal indeed.
-	 */
-	p = (unsigned short *)vc->vc_origin;
-	mask = vc->vc_hi_font_mask | 0xff;
-	for (y = 0; y < vc->vc_rows; y++) {
-		char32_t *line = uniscr->lines[y];
-		for (x = 0; x < vc->vc_cols; x++) {
-			u16 glyph = scr_readw(p++) & mask;
-			char32_t uc = line[x];
-			int tc = conv_uni_to_pc(vc, uc);
-			if (tc == -4)
-				tc = conv_uni_to_pc(vc, 0xfffd);
-			if (tc == -4)
-				tc = conv_uni_to_pc(vc, '?');
-			if (tc != glyph)
-				pr_err_ratelimited(
-					"%s: mismatch at %d,%d: glyph=%#x tc=%#x\n",
-					__func__, x, y, glyph, tc);
-		}
-	}
-}
-
-
-static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
-		enum con_scroll dir, unsigned int nr)
-{
-	u16 *clear, *d, *s;
-
-	if (t + nr >= b)
-		nr = b - t - 1;
-	if (b > vc->vc_rows || t >= b || nr < 1)
-		return;
-	vc_uniscr_scroll(vc, t, b, dir, nr);
-	if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, dir, nr))
+	vc_uniscr_scroll(vc, top, bottom, dir, nr);
+	if (con_is_visible(vc) &&
+			vc->vc_sw->con_scroll(vc, top, bottom, dir, nr))
 		return;
 
-	s = clear = (u16 *)(vc->vc_origin + vc->vc_size_row * t);
-	d = (u16 *)(vc->vc_origin + vc->vc_size_row * (t + nr));
+	src = clear = (u16 *)(vc->vc_origin + vc->vc_size_row * top);
+	dst = (u16 *)(vc->vc_origin + vc->vc_size_row * (top + nr));
 
 	if (dir == SM_UP) {
-		clear = s + (b - t - nr) * vc->vc_cols;
-		swap(s, d);
+		clear = src + (rows - nr) * vc->vc_cols;
+		swap(src, dst);
 	}
-	scr_memmovew(d, s, (b - t - nr) * vc->vc_size_row);
+	scr_memmovew(dst, src, (rows - nr) * vc->vc_size_row);
 	scr_memsetw(clear, vc->vc_video_erase_char, vc->vc_size_row * nr);
 }
 
@@ -1201,7 +1145,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	unsigned int new_cols, new_rows, new_row_size, new_screen_size;
 	unsigned int user;
 	unsigned short *oldscreen, *newscreen;
-	struct uni_screen *new_uniscr = NULL;
+	u32 **new_uniscr = NULL;
 
 	WARN_CONSOLE_UNLOCKED();
 
@@ -1245,7 +1189,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	if (!newscreen)
 		return -ENOMEM;
 
-	if (get_vc_uniscr(vc)) {
+	if (vc->vc_uni_lines) {
 		new_uniscr = vc_uniscr_alloc(new_cols, new_rows);
 		if (!new_uniscr) {
 			kfree(newscreen);
@@ -1297,7 +1241,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	end = old_origin + old_row_size * min(old_rows, new_rows);
 
 	vc_uniscr_copy_area(new_uniscr, new_cols, new_rows,
-			    get_vc_uniscr(vc), rlth/2, first_copied_row,
+			    vc->vc_uni_lines, rlth/2, first_copied_row,
 			    min(old_rows, new_rows));
 	vc_uniscr_set(vc, new_uniscr);
 
@@ -2959,7 +2903,6 @@ rescan_last_byte:
 			goto rescan_last_byte;
 	}
 	con_flush(vc, &draw);
-	vc_uniscr_debug_check(vc);
 	console_conditional_schedule();
 	notify_update(vc);
 	console_unlock();
@@ -3156,8 +3099,14 @@ static struct tty_driver *vt_console_device(struct console *c, int *index)
 	return console_driver;
 }
 
+static int vt_console_setup(struct console *co, char *options)
+{
+	return co->index >= MAX_NR_CONSOLES ? -EINVAL : 0;
+}
+
 static struct console vt_console_driver = {
 	.name		= "tty",
+	.setup		= vt_console_setup,
 	.write		= vt_console_print,
 	.device		= vt_console_device,
 	.unblank	= unblank_screen,
@@ -4574,26 +4523,30 @@ void reset_palette(struct vc_data *vc)
 /*
  *  Font switching
  *
- *  Currently we only support fonts up to 32 pixels wide, at a maximum height
- *  of 32 pixels. Userspace fontdata is stored with 32 bytes (shorts/ints, 
- *  depending on width) reserved for each character which is kinda wasty, but 
- *  this is done in order to maintain compatibility with the EGA/VGA fonts. It 
- *  is up to the actual low-level console-driver convert data into its favorite
- *  format (maybe we should add a `fontoffset' field to the `display'
- *  structure so we won't have to convert the fontdata all the time.
+ *  Currently we only support fonts up to 128 pixels wide, at a maximum height
+ *  of 128 pixels. Userspace fontdata may have to be stored with 32 bytes
+ *  (shorts/ints, depending on width) reserved for each character which is
+ *  kinda wasty, but this is done in order to maintain compatibility with the
+ *  EGA/VGA fonts. It is up to the actual low-level console-driver convert data
+ *  into its favorite format (maybe we should add a `fontoffset' field to the
+ *  `display' structure so we won't have to convert the fontdata all the time.
  *  /Jes
  */
 
-#define max_font_size 65536
+#define max_font_width	64
+#define max_font_height	128
+#define max_font_glyphs	512
+#define max_font_size	(max_font_glyphs*max_font_width*max_font_height)
 
 static int con_font_get(struct vc_data *vc, struct console_font_op *op)
 {
 	struct console_font font;
 	int rc = -EINVAL;
 	int c;
+	unsigned int vpitch = op->op == KD_FONT_OP_GET_TALL ? op->height : 32;
 
 	if (op->data) {
-		font.data = kmalloc(max_font_size, GFP_KERNEL);
+		font.data = kvmalloc(max_font_size, GFP_KERNEL);
 		if (!font.data)
 			return -ENOMEM;
 	} else
@@ -4603,7 +4556,7 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op)
 	if (vc->vc_mode != KD_TEXT)
 		rc = -EINVAL;
 	else if (vc->vc_sw->con_font_get)
-		rc = vc->vc_sw->con_font_get(vc, &font);
+		rc = vc->vc_sw->con_font_get(vc, &font, vpitch);
 	else
 		rc = -ENOSYS;
 	console_unlock();
@@ -4611,7 +4564,7 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op)
 	if (rc)
 		goto out;
 
-	c = (font.width+7)/8 * 32 * font.charcount;
+	c = (font.width+7)/8 * vpitch * font.charcount;
 
 	if (op->data && font.charcount > op->charcount)
 		rc = -ENOSPC;
@@ -4628,7 +4581,7 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op)
 		rc = -EFAULT;
 
 out:
-	kfree(font.data);
+	kvfree(font.data);
 	return rc;
 }
 
@@ -4637,16 +4590,20 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op)
 	struct console_font font;
 	int rc = -EINVAL;
 	int size;
+	unsigned int vpitch = op->op == KD_FONT_OP_SET_TALL ? op->height : 32;
 
 	if (vc->vc_mode != KD_TEXT)
 		return -EINVAL;
 	if (!op->data)
 		return -EINVAL;
-	if (op->charcount > 512)
+	if (op->charcount > max_font_glyphs)
+		return -EINVAL;
+	if (op->width <= 0 || op->width > max_font_width || !op->height ||
+	    op->height > max_font_height)
 		return -EINVAL;
-	if (op->width <= 0 || op->width > 32 || !op->height || op->height > 32)
+	if (vpitch < op->height)
 		return -EINVAL;
-	size = (op->width+7)/8 * 32 * op->charcount;
+	size = (op->width+7)/8 * vpitch * op->charcount;
 	if (size > max_font_size)
 		return -ENOSPC;
 
@@ -4664,7 +4621,7 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op)
 	else if (vc->vc_sw->con_font_set) {
 		if (vc_is_sel(vc))
 			clear_selection();
-		rc = vc->vc_sw->con_font_set(vc, &font, op->flags);
+		rc = vc->vc_sw->con_font_set(vc, &font, vpitch, op->flags);
 	} else
 		rc = -ENOSYS;
 	console_unlock();
@@ -4710,8 +4667,10 @@ int con_font_op(struct vc_data *vc, struct console_font_op *op)
 {
 	switch (op->op) {
 	case KD_FONT_OP_SET:
+	case KD_FONT_OP_SET_TALL:
 		return con_font_set(vc, op);
 	case KD_FONT_OP_GET:
+	case KD_FONT_OP_GET_TALL:
 		return con_font_get(vc, op);
 	case KD_FONT_OP_SET_DEFAULT:
 		return con_font_default(vc, op);
@@ -4740,10 +4699,11 @@ EXPORT_SYMBOL_GPL(screen_glyph);
 
 u32 screen_glyph_unicode(const struct vc_data *vc, int n)
 {
-	struct uni_screen *uniscr = get_vc_uniscr(vc);
+	u32 **uni_lines = vc->vc_uni_lines;
+
+	if (uni_lines)
+		return uni_lines[n / vc->vc_cols][n % vc->vc_cols];
 
-	if (uniscr)
-		return uniscr->lines[n / vc->vc_cols][n % vc->vc_cols];
 	return inverse_translate(vc, screen_glyph(vc, n * 2), true);
 }
 EXPORT_SYMBOL_GPL(screen_glyph_unicode);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 36bf051b345b..11da5fb284d0 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -651,13 +651,13 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	return tty_port_open(&acm->port, tty, filp);
 }
 
-static void acm_port_dtr_rts(struct tty_port *port, int raise)
+static void acm_port_dtr_rts(struct tty_port *port, bool active)
 {
 	struct acm *acm = container_of(port, struct acm, port);
 	int val;
 	int res;
 
-	if (raise)
+	if (active)
 		val = USB_CDC_CTRL_DTR | USB_CDC_CTRL_RTS;
 	else
 		val = 0;
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index da19a5fa414f..c3ea3a46ed76 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,7 +169,7 @@ static int usb_console_setup(struct console *co, char *options)
 			tty_save_termios(tty);
 			tty_kref_put(tty);
 		}
-		tty_port_set_initialized(&port->port, 1);
+		tty_port_set_initialized(&port->port, true);
 	}
 	/* Now that any required fake tty operations are completed restore
 	 * the tty port count */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 164521ee10c6..f8404073558b 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -754,7 +754,7 @@ static struct usb_serial_driver *search_serial_device(
 	return NULL;
 }
 
-static int serial_port_carrier_raised(struct tty_port *port)
+static bool serial_port_carrier_raised(struct tty_port *port)
 {
 	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 	struct usb_serial_driver *drv = p->serial->type;
@@ -762,10 +762,10 @@ static int serial_port_carrier_raised(struct tty_port *port)
 	if (drv->carrier_raised)
 		return drv->carrier_raised(p);
 	/* No carrier control - don't block */
-	return 1;
+	return true;
 }
 
-static void serial_port_dtr_rts(struct tty_port *port, int on)
+static void serial_port_dtr_rts(struct tty_port *port, bool on)
 {
 	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 	struct usb_serial_driver *drv = p->serial->type;
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index d9c682ae0392..e8e4f82cd4a1 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -497,7 +497,7 @@ static int newport_blank(struct vc_data *c, int blank, int mode_switch)
 	return 1;
 }
 
-static int newport_set_font(int unit, struct console_font *op)
+static int newport_set_font(int unit, struct console_font *op, unsigned int vpitch)
 {
 	int w = op->width;
 	int h = op->height;
@@ -507,7 +507,7 @@ static int newport_set_font(int unit, struct console_font *op)
 
 	/* ladis: when I grow up, there will be a day... and more sizes will
 	 * be supported ;-) */
-	if ((w != 8) || (h != 16)
+	if ((w != 8) || (h != 16) || (vpitch != 32)
 	    || (op->charcount != 256 && op->charcount != 512))
 		return -EINVAL;
 
@@ -569,9 +569,10 @@ static int newport_font_default(struct vc_data *vc, struct console_font *op, cha
 	return newport_set_def_font(vc->vc_num, op);
 }
 
-static int newport_font_set(struct vc_data *vc, struct console_font *font, unsigned flags)
+static int newport_font_set(struct vc_data *vc, struct console_font *font,
+			    unsigned int vpitch, unsigned int flags)
 {
-	return newport_set_font(vc->vc_num, font);
+	return newport_set_font(vc->vc_num, font, vpitch);
 }
 
 static bool newport_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index f304163e87e9..2cea69418a83 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -169,7 +169,8 @@ static int sticon_set_def_font(int unit, struct console_font *op)
 	return 0;
 }
 
-static int sticon_set_font(struct vc_data *vc, struct console_font *op)
+static int sticon_set_font(struct vc_data *vc, struct console_font *op,
+			   unsigned int vpitch)
 {
 	struct sti_struct *sti = sticon_sti;
 	int vc_cols, vc_rows, vc_old_cols, vc_old_rows;
@@ -181,7 +182,7 @@ static int sticon_set_font(struct vc_data *vc, struct console_font *op)
 	struct sti_cooked_font *cooked_font;
 	unsigned char *data = op->data, *p;
 
-	if ((w < 6) || (h < 6) || (w > 32) || (h > 32)
+	if ((w < 6) || (h < 6) || (w > 32) || (h > 32) || (vpitch != 32)
 	    || (op->charcount != 256 && op->charcount != 512))
 		return -EINVAL;
 	pitch = ALIGN(w, 8) / 8;
@@ -267,9 +268,9 @@ static int sticon_font_default(struct vc_data *vc, struct console_font *op, char
 }
 
 static int sticon_font_set(struct vc_data *vc, struct console_font *font,
-			   unsigned int flags)
+			   unsigned int vpitch, unsigned int flags)
 {
-	return sticon_set_font(vc, font);
+	return sticon_set_font(vc, font, vpitch);
 }
 
 static void sticon_init(struct vc_data *c, int init)
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index fcdf017e2665..e25ba523892e 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1029,7 +1029,7 @@ static int vgacon_adjust_height(struct vc_data *vc, unsigned fontheight)
 }
 
 static int vgacon_font_set(struct vc_data *c, struct console_font *font,
-			   unsigned int flags)
+			   unsigned int vpitch, unsigned int flags)
 {
 	unsigned charcount = font->charcount;
 	int rc;
@@ -1037,7 +1037,7 @@ static int vgacon_font_set(struct vc_data *c, struct console_font *font,
 	if (vga_video_type < VIDEO_TYPE_EGAM)
 		return -EINVAL;
 
-	if (font->width != VGA_FONTWIDTH ||
+	if (font->width != VGA_FONTWIDTH || font->height > 32 || vpitch != 32 ||
 	    (charcount != 256 && charcount != 512))
 		return -EINVAL;
 
@@ -1050,9 +1050,9 @@ static int vgacon_font_set(struct vc_data *c, struct console_font *font,
 	return rc;
 }
 
-static int vgacon_font_get(struct vc_data *c, struct console_font *font)
+static int vgacon_font_get(struct vc_data *c, struct console_font *font, unsigned int vpitch)
 {
-	if (vga_video_type < VIDEO_TYPE_EGAM)
+	if (vga_video_type < VIDEO_TYPE_EGAM || vpitch != 32)
 		return -EINVAL;
 
 	font->width = VGA_FONTWIDTH;
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 94d4ed0331c9..0a2c47df01f4 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2266,7 +2266,7 @@ static int fbcon_debug_leave(struct vc_data *vc)
 	return 0;
 }
 
-static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
+static int fbcon_get_font(struct vc_data *vc, struct console_font *font, unsigned int vpitch)
 {
 	u8 *fontdata = vc->vc_font.data;
 	u8 *data = font->data;
@@ -2274,6 +2274,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 
 	font->width = vc->vc_font.width;
 	font->height = vc->vc_font.height;
+	if (font->height > vpitch)
+		return -ENOSPC;
 	font->charcount = vc->vc_hi_font_mask ? 512 : 256;
 	if (!font->data)
 		return 0;
@@ -2285,8 +2287,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 
 		for (i = 0; i < font->charcount; i++) {
 			memcpy(data, fontdata, j);
-			memset(data + j, 0, 32 - j);
-			data += 32;
+			memset(data + j, 0, vpitch - j);
+			data += vpitch;
 			fontdata += j;
 		}
 	} else if (font->width <= 16) {
@@ -2296,8 +2298,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 
 		for (i = 0; i < font->charcount; i++) {
 			memcpy(data, fontdata, j);
-			memset(data + j, 0, 64 - j);
-			data += 64;
+			memset(data + j, 0, 2*vpitch - j);
+			data += 2*vpitch;
 			fontdata += j;
 		}
 	} else if (font->width <= 24) {
@@ -2311,8 +2313,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 				*data++ = fontdata[2];
 				fontdata += sizeof(u32);
 			}
-			memset(data, 0, 3 * (32 - j));
-			data += 3 * (32 - j);
+			memset(data, 0, 3 * (vpitch - j));
+			data += 3 * (vpitch - j);
 		}
 	} else {
 		j = vc->vc_font.height * 4;
@@ -2321,8 +2323,8 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 
 		for (i = 0; i < font->charcount; i++) {
 			memcpy(data, fontdata, j);
-			memset(data + j, 0, 128 - j);
-			data += 128;
+			memset(data + j, 0, 4 * vpitch - j);
+			data += 4 * vpitch;
 			fontdata += j;
 		}
 	}
@@ -2457,19 +2459,12 @@ err_out:
 }
 
 /*
- *  User asked to set font; we are guaranteed that
- *	a) width and height are in range 1..32
- *	b) charcount does not exceed 512
- *  but lets not assume that, since someone might someday want to use larger
- *  fonts. And charcount of 512 is small for unicode support.
- *
- *  However, user space gives the font in 32 rows , regardless of
- *  actual font height. So a new API is needed if support for larger fonts
- *  is ever implemented.
+ *  User asked to set font; we are guaranteed that charcount does not exceed 512
+ *  but lets not assume that, since charcount of 512 is small for unicode support.
  */
 
 static int fbcon_set_font(struct vc_data *vc, struct console_font *font,
-			  unsigned int flags)
+			  unsigned int vpitch, unsigned int flags)
 {
 	struct fb_info *info = fbcon_info_from_console(vc->vc_num);
 	unsigned charcount = font->charcount;
@@ -2515,7 +2510,7 @@ static int fbcon_set_font(struct vc_data *vc, struct console_font *font,
 	FNTSIZE(new_data) = size;
 	REFCOUNT(new_data) = 0;	/* usage counter */
 	for (i=0; i< charcount; i++) {
-		memcpy(new_data + i*h*pitch, data +  i*32*pitch, h*pitch);
+		memcpy(new_data + i*h*pitch, data +  i*vpitch*pitch, h*pitch);
 	}
 
 	/* Since linux has a nice crc32 function use it for counting font