| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
`rustdoc` can get confused when generating documentation into a folder
that contains generated files from other `rustdoc` versions.
For instance, running something like:
rustup default 1.78.0
make LLVM=1 rustdoc
rustup default 1.88.0
make LLVM=1 rustdoc
may generate errors like:
error: couldn't generate documentation: invalid template: last line expected to start with a comment
|
= note: failed to create or modify "./Documentation/output/rust/rustdoc/src-files.js"
Thus just always clean the output folder before generating the
documentation -- we are anyway regenerating it every time the `rustdoc`
target gets called, at least for the time being.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Reported-by: Daniel Almeida <daniel.almeida@collabora.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089/topic/x/near/527201113
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://lore.kernel.org/r/20250726133435.2460085-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.88.0 (released 2025-06-26), `rustdoc` complains
about a target modifier mismatch in configurations where `-Zfixed-x18`
is passed:
error: mixing `-Zfixed-x18` will cause an ABI mismatch in crate `rust_out`
|
= help: the `-Zfixed-x18` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zfixed-x18` in this crate is incompatible with `-Zfixed-x18=` in dependency `core`
= help: set `-Zfixed-x18=` in this crate or unset `-Zfixed-x18` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=fixed-x18` to silence this error
The reason is that `rustdoc` was not passing the target modifiers when
configuring the session options, and thus it would report a mismatch
that did not exist as soon as a target modifier is used in a dependency.
We did not notice it in the kernel until now because `-Zfixed-x18` has
been a target modifier only since 1.88.0 (and it is the only one we use
so far).
The issue has been reported upstream [1] and a fix has been submitted
[2], including a test similar to the kernel case.
[ This is now fixed upstream (thanks Guillaume for the quick review),
so it will be fixed in Rust 1.90.0 (expected 2025-09-18).
- Miguel ]
Meanwhile, conditionally pass `-Cunsafe-allow-abi-mismatch=fixed-x18`
to workaround the issue on our side.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/rust-for-linux/36cdc798-524f-4910-8b77-d7b9fac08d77@oss.qualcomm.com/
Link: https://github.com/rust-lang/rust/issues/144521 [1]
Link: https://github.com/rust-lang/rust/pull/144523 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250727092317.2930617-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
|
|
Add warn_on macro, uses the BUG/WARN feature (lib/bug.c) via assembly
for x86_64/arm64/riscv.
The current Rust code simply wraps BUG() macro but doesn't provide the
proper debug information. The BUG/WARN feature can only be used from
assembly.
This uses the assembly code exported by the C side via ARCH_WARN_ASM
macro. To avoid duplicating the assembly code, this approach follows
the same strategy as the static branch code: it generates the assembly
code for Rust using the C preprocessor at compile time.
Similarly, ARCH_WARN_REACHABLE is also used at compile time to
generate the assembly code; objtool's reachable annotation code. It's
used for only architectures that use objtool.
For now, Loongarch and arm just use a wrapper for WARN macro.
UML doesn't use the assembly BUG/WARN feature; just wrapping generic
BUG/WARN functions implemented in C works.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502094537.231725-5-fujita.tomonori@gmail.com
[ Avoid evaluating the condition twice (a good idea in general,
but it also matches the C side). Simplify with `as_char_ptr()`
to avoid a cast. Cast to `ffi` integer types for
`warn_slowpath_fmt`. Avoid cast for `null()`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.89.0 (expected 2025-08-07), the Rust compiler fails
to build the `rusttest` target due to undefined references such as:
kernel...-cgu.0:(.text....+0x116): undefined reference to
`rust_helper_kunit_get_current_test'
Moreover, tooling like `modpost` gets confused:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/nova/nova.o
ERROR: modpost: missing MODULE_LICENSE() in drivers/gpu/nova-core/nova_core.o
The reason behind both issues is that the Rust compiler will now [1]
treat `#[used]` as `#[used(linker)]` instead of `#[used(compiler)]`
for our targets. This means that the retain section flag (`R`,
`SHF_GNU_RETAIN`) will be used and that they will be marked as `unique`
too, with different IDs. In turn, that means we end up with undefined
references that did not get discarded in `rusttest` and that multiple
`.modinfo` sections are generated, which confuse tooling like `modpost`
because they only expect one.
Thus start using `#[used(compiler)]` to keep the previous behavior
and to be explicit about what we want. Sadly, it is an unstable feature
(`used_with_arg`) [2] -- we will talk to upstream Rust about it. The good
news is that it has been available for a long time (Rust >= 1.60) [3].
The changes should also be fine for previous Rust versions, since they
behave the same way as before [4].
Alternatively, we could use `#[no_mangle]` or `#[export_name = ...]`
since those still behave like `#[used(compiler)]`, but of course it is
not really what we want to express, and it requires other changes to
avoid symbol conflicts.
Cc: David Wood <david@davidtw.co>
Cc: Wesley Wiser <wwiser@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/140872 [1]
Link: https://github.com/rust-lang/rust/issues/93798 [2]
Link: https://github.com/rust-lang/rust/pull/91504 [3]
Link: https://godbolt.org/z/sxzWTMfzW [4]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20250712160103.1244945-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
|
|
Rust code is currently not instrumented properly when KCOV is enabled.
Thus, add the relevant flags to perform instrumentation correctly. This
is necessary for efficient fuzzing of Rust code.
The sanitizer-coverage features of LLVM have existed for long enough
that they are available on any LLVM version supported by rustc, so we do
not need any Kconfig feature detection. The coverage level is set to 3,
as that is the level needed by trace-pc.
We do not instrument `core` since when we fuzz the kernel, we are
looking for bugs in the kernel, not the Rust stdlib.
Link: https://lkml.kernel.org/r/20250501-rust-kcov-v2-1-b71e83e9779f@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Aleksandr Nogikh <nogikh@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The KUnit `#[test]` support that landed recently is very basic and does
not map the `assert*!` macros into KUnit like the doctests do, so they
panic at the moment.
Thus implement the custom mapping in a similar way to doctests, reusing
the infrastructure there.
In Rust 1.88.0, the `file()` method in `Span` may be stable [1]. However,
it was changed recently (from `SourceFile`), so we need to do something
different in previous versions. Thus create a helper for it and use it
to get the path.
With this, a failing test suite like:
#[kunit_tests(my_test_suite)]
mod tests {
use super::*;
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
#[test]
fn my_second_test() {
assert!(42 >= 43);
}
}
will properly map back to KUnit, printing something like:
[ 1.924325] KTAP version 1
[ 1.924421] # Subtest: my_test_suite
[ 1.924506] # speed: normal
[ 1.924525] 1..2
[ 1.926385] # my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
[ 1.926385] Expected 42 == 43 to be true, but is false
[ 1.928026] # my_first_test.speed: normal
[ 1.928075] not ok 1 my_first_test
[ 1.928723] # my_second_test: ASSERTION FAILED at rust/kernel/lib.rs:256
[ 1.928723] Expected 42 >= 43 to be true, but is false
[ 1.929834] # my_second_test.speed: normal
[ 1.929868] not ok 2 my_second_test
[ 1.930032] # my_test_suite: pass:0 fail:2 skip:0 total:2
[ 1.930153] # Totals: pass:0 fail:2 skip:0 total
Link: https://github.com/rust-lang/rust/pull/140514 [1]
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-2-ojeda@kernel.org
[ Required `KUNIT=y` like for doctests. Used the `cfg_attr` from the
TODO comment and clarified its comment now that the stabilization is
in beta and thus quite likely stable in Rust 1.88.0. Simplified the
`new_body` code by introducing a new variable. Added
`#[allow(clippy::incompatible_msrv)]`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Rust 1.87 (released on 2025-05-15) compiles core library with edition
2024 instead of 2021 [1]. Ensure that the edition matches libcore's
expectation to avoid potential breakage.
[ J3m3 reported in Zulip [2] that the `rust-analyzer` target was
broken after this patch -- indeed, we need to avoid `core-cfgs`
since those are passed to the `rust-analyzer` target.
So, instead, I tweaked the patch to create a new `core-edition`
variable and explicitly mention the `--edition` flag instead of
reusing `core-cfg`s.
In addition, pass a new argument using this new variable to
`generate_rust_analyzer.py` so that we set the right edition there.
By the way, for future reference: the `filter-out` change is needed
for Rust < 1.87, since otherwise we would skip the `--edition=2021`
we just added, ending up with no edition flag, and thus the compiler
would default to the 2015 one.
[2] https://rust-for-linux.zulipchat.com/#narrow/channel/291565/topic/x/near/520206547
- Miguel ]
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/138162 [1]
Reported-by: est31 <est31@protonmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1163
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250517085600.2857460-1-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Currently rust on arm fails to compile due to '-mno-fdpic'. This flag
disables a GCC feature that we don't want for kernel builds, so let's
skip it as it doesn't apply to Clang.
UPD include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
RUSTC L rust/core.o
BINDGEN rust/bindings/bindings_generated.rs
BINDGEN rust/bindings/bindings_helpers_generated.rs
CC rust/helpers/helpers.o
Unable to generate bindings: clang diagnosed error: error: unknown argument: '-mno-fdpic'
make[2]: *** [rust/Makefile:369: rust/bindings/bindings_helpers_generated.rs] Error 1
make[2]: *** Deleting file 'rust/bindings/bindings_helpers_generated.rs'
make[2]: *** Waiting for unfinished jobs....
Unable to generate bindings: clang diagnosed error: error: unknown argument: '-mno-fdpic'
make[2]: *** [rust/Makefile:349: rust/bindings/bindings_generated.rs] Error 1
make[2]: *** Deleting file 'rust/bindings/bindings_generated.rs'
make[1]: *** [/home/pmos/build/src/linux-next-next-20250521/Makefile:1285: prepare] Error 2
make: *** [Makefile:248: __sub-make] Error 2
[ Naresh provided the draft diff [1].
Ben explained [2]:
FDPIC is only relevant with no-MMU targets, and then only for userspace.
When configured for the arm-*-uclinuxfdpiceabi target, GCC enables FDPIC
by default to facilitate compiling userspace programs. FDPIC is never
used for the kernel, and we pass -mno-fdpic when building the kernel to
override the default and make sure FDPIC is disabled.
and [3]:
-mno-fdpic disables a GCC feature that we don't want for kernel builds.
clang does not support this feature, so it always behaves as though
-mno-fdpic is passed. Therefore, it should be fine to mix the two, at
least as far as FDPIC is concerned.
[1] https://lore.kernel.org/rust-for-linux/CA+G9fYt4otQK4pHv8pJBW9e28yHSGCDncKquwuJiJ_1ou0pq0w@mail.gmail.com/
[2] https://lore.kernel.org/rust-for-linux/aAKrq2InExQk7f_k@dell-precision-5540/
[3] https://lore.kernel.org/rust-for-linux/aAo_F_UP1Gd4jHlZ@dell-precision-5540/
- Miguel ]
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYvOanQBYXKSg7C6EU30k8sTRC0JRPJXYu7wWK51w38QUQ@mail.gmail.com/
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20250522-rust-mno-fdpic-arm-fix-v2-1-a6f691d9c198@gmail.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
With CONFIG_PREFIX_SYMBOLS, objtool adds __pfx prefix symbols
to claim the compiler emitted call padding bytes. When
CONFIG_X86_KERNEL_IBT is not selected, the symbols are added to
individual object files and for Rust objects, they end up being
exported, resulting in warnings with CONFIG_GENDWARFKSYMS as the
symbols have no debugging information:
warning: gendwarfksyms: symbol_print_versions: no information for symbol __pfx_rust_helper_put_task_struct
warning: gendwarfksyms: symbol_print_versions: no information for symbol __pfx_rust_helper_task_euid
warning: gendwarfksyms: symbol_print_versions: no information for symbol __pfx_rust_helper_readq_relaxed
...
Filter out the __pfx prefix from exported symbols similarly to
the existing __cfi and __odr_asan prefixes.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org
Fixes: ac61506bf2d1 ("rust: Use gendwarfksyms + extended modversions for CONFIG_MODVERSIONS")
Link: https://lore.kernel.org/r/20250318231815.917621-2-samitolvanen@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
|
|
Pull ARM and clkdev updates from Russell King:
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9445/1: clkdev: Mark some functions with __printf() attribute
ARM: 9444/1: add KEEP() keyword to ARM_VECTORS
ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE
ARM: 9442/1: smp: Fix IPI alignment in /proc/interrupts
ARM: 9441/1: rust: Enable Rust support for ARMv7
ARM: 9439/1: arm32: simplify ARM_MMU_KEEP usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
- Enable UBSAN (Undefined Behavior Sanitizer)
- Increase MAX_IO_PICS up to 8
- Increase ARCH_DMA_MINALIGN up to 16
- Fix and improve BPF JIT
- Fix and improve vDSO implementation
- Update the default config file
- Some bug fixes and other small changes
* tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: vDSO: Make use of the t8 register for vgetrandom-chacha
LoongArch: vDSO: Remove --hash-style=sysv
LoongArch: BPF: Don't override subprog's return value
LoongArch: BPF: Use move_addr() for BPF_PSEUDO_FUNC
LoongArch: BPF: Fix off-by-one error in build_prologue()
LoongArch: Rework the arch_kgdb_breakpoint() implementation
LoongArch: Fix device node refcount leak in fdt_cpu_clk_init()
LoongArch: Increase ARCH_DMA_MINALIGN up to 16
LoongArch: Increase MAX_IO_PICS up to 8
LoongArch: Fix help text of CMDLINE_EXTEND in Kconfig
LoongArch: Enable UBSAN (Undefined Behavior Sanitizer)
LoongArch: Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
rust: Fix enabling Rust and building with GCC for LoongArch
|
|
This patch fixes a build issue on LoongArch when Rust is enabled and
compiled with GCC by explicitly setting the bindgen target and skipping
C flags that Clang doesn't support.
Cc: stable@vger.kernel.org
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This commit allows building ARMv7 kernels with Rust support.
The rust core library expects some __eabi_... functions
that are not implemented in the kernel.
Those functions are some float operations and __aeabi_uldivmod.
For now those are implemented with define_panicking_intrinsics!.
This is based on the code by Sven Van Asbroeck from the original
rust branch and inspired by the AArch version by Jamie Cunliffe.
I have tested the rust samples and a custom simple MMIO module
on hardware (De1SoC FPGA + Arm A9 CPU).
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
`rustdoc` only recognizes `--remap-path-prefix` starting with
Rust 1.81.0, which is later than on minimum, so we cannot pass it
unconditionally. Otherwise, we get:
error: Unrecognized option: 'remap-path-prefix'
Note that `rustc` (the compiler) does recognize the flag since a long
time ago (1.26.0).
Moreover, `rustdoc` since Rust 1.82.0 ICEs in out-of-tree builds when
using `--remap-path-prefix`. The issue has been reduced and reported
upstream [1].
Thus workaround both issues by simply skipping the flag when generating
the docs -- it is not critical there anyway.
The ICE does not reproduce under `--test`, but we still need to skip
the flag as well for `RUSTDOC TK` since it is not recognized.
Fixes: dbdffaf50ff9 ("kbuild, rust: use -fremap-path-prefix to make paths relative")
Link: https://github.com/rust-lang/rust/issues/138520 [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Usermode Linux uses "um" as primary architecture name and the underlying
physical architecture is provided in "SUBARCH".
Resolve the target architecture flags through that underlying
architecture.
This is the same pattern as used by scripts/Makefile.clang from which
the bindgen flags are derived.
[ David says:
(...) this is enough to get Rust-for-Linux working with gcc under
64-bit UML on my system.
- Miguel ]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Gow <davidgow@googl.ecom>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://lore.kernel.org/r/20250208-rust-kunit-v1-1-94a026be6d72@weissschuh.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
To synchronize the kernel's version of pin-init with the user-space
version, introduce support for `std` and `alloc`. While the kernel uses
neither, the user-space version has to support both. Thus include the
required `#[cfg]`s and additional code.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-17-benno.lossin@proton.me
[ Undo the temporary `--extern force:alloc` since now we have contents
for `alloc` here. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Rename relative paths inside of the crate to still refer to the same
items, also rename paths inside of the kernel crate and adjust the build
system to build the crate.
[ Remove the `expect` (and thus the `lint_reasons` feature) since
the tree now uses `quote!` from `rust/macros/export.rs`. Remove the
`TokenStream` import removal, since it is now used as well.
In addition, temporarily (i.e. just for this commit) use an `--extern
force:alloc` to prevent an unknown `new_uninit` error in the `rustdoc`
target. For context, please see a similar case in:
https://lore.kernel.org/lkml/20240422090644.525520-1-ojeda@kernel.org/
And adjusted the message above. - Miguel ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-16-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add infrastructure for moving the initialization API to its own crate.
Covers all make targets such as `rust-analyzer` and `rustdoc`. The tests
of pin-init are not added to `rusttest`, as they are already tested in
the user-space repository [1].
Link: https://github.com/Rust-for-Linux/pin-init [1]
Co-developed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-15-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
ASAN generates special synthetic symbols to help check for ODR
violations. These synthetic symbols lack debug information, so
gendwarfksyms emits warnings when processing them. No code should ever
have a dependency on these symbols, so we should not be exporting them,
just like the __cfi symbols.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250122-gendwarfksyms-kasan-rust-v1-1-5ee5658f4fb6@google.com
[ Fixed typo in commit message. Slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This seems to break the build when building with gcc15:
Unable to generate bindings: ClangDiagnostic("error: unknown
argument: '-fzero-init-padding-bits=all'\n")
Thus skip that flag.
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Fixes: dce4aab8441d ("kbuild: Use -fzero-init-padding-bits=all")
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250129215003.1736127-1-jforbes@fedoraproject.org
[ Slightly reworded commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
There seems to have been merge skew between commit b2c261fa8629 ("rust:
kbuild: expand rusttest target for macros") and commit 0730422bced5
("rust: use host dylib naming convention to support macOS") ; the latter
replaced `libmacros.so` with `$(libmacros_name)` and the former added an
instance of `libmacros.so`. The former was not yet applied when the
latter was sent, resulting in a stray `libmacros.so`. Replace the stray
with `$(libmacros_name)` to allow `rusttest` to build on macOS.
Fixes: 0730422bced5 ("rust: use host dylib naming convention to support macOS")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250201-fix-mac-build-again-v1-1-ca665f5d7de7@gmail.com
[ Slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
|
|
Previously, two things stopped Rust from using MODVERSIONS:
1. Rust symbols are occasionally too long to be represented in the
original versions table
2. Rust types cannot be properly hashed by the existing genksyms
approach because:
* Looking up type definitions in Rust is more complex than C
* Type layout is potentially dependent on the compiler in Rust,
not just the source type declaration.
CONFIG_EXTENDED_MODVERSIONS addresses the first point, and
CONFIG_GENDWARFKSYMS the second. If Rust wants to use MODVERSIONS, allow
it to do so by selecting both features.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Co-developed-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
These are flags to be passed when linking proc macros for the Rust
toolchain. If unset, it defaults to $(KBUILD_HOSTLDFLAGS).
This is needed because the list of flags to link hostprogs is not
necessarily the same as the list of flags used to link libmacros.so.
When we build proc macros, we need the latter, not the former (e.g. when
using a Rust compiler binary linked to a different C library than host
programs).
To distinguish between the two, introduce this new variable to stand
out from KBUILD_HOSTLDFLAGS used to link other host progs.
Signed-off-by: HONG Yifan <elsk@google.com>
Link: https://lore.kernel.org/r/20241017210430.2401398-2-elsk@google.com
[ v3:
- `export`ed the variable. Otherwise it would not be visible in
`rust/Makefile`.
- Removed "additional" from the documentation and commit message,
since this actually replaces the other flags, unlike other cases.
- Added example of use case to documentation and commit message.
Thanks Alice for the details on what Google needs!
- Instead of `HOSTLDFLAGS`, used `KBUILD_HOSTLDFLAGS` as the fallback
to preserve the previous behavior as much as possible, as discussed
with Alice/Yifan. Thus moved the variable down too (currently we
do not modify `KBUILD_HOSTLDFLAGS` elsewhere) and avoided
mentioning `HOSTLDFLAGS` directly in the documentation.
- Fixed documentation header formatting.
- Reworded slightly.
- Miguel ]
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: HONG Yifan <elsk@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241112184455.855133-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Because the `macros` crate exposes procedural macros, it must be
compiled as a dynamic library (so it can be loaded by the compiler at
compile-time).
Before this change the resulting artifact was always named
`libmacros.so`, which works on hosts where this matches the naming
convention for dynamic libraries. However the proper name on macOS would
be `libmacros.dylib`.
This turns out to matter even when the dependency is passed with a path
(`--extern macros=path/to/libmacros.so` rather than `--extern macros`)
because rustc uses the file name to infer the type of the library (see
link). This is because there's no way to specify both the path to and
the type of the external library via CLI flags. The compiler could
speculatively parse the file to determine its type, but it does not do
so today.
This means that libraries that match neither rustc's naming convention
for static libraries nor the platform's naming convention for dynamic
libraries are *rejected*.
The only solution I've found is to follow the host platform's naming
convention. This patch does that by querying the compiler to determine
the appropriate name for the artifact. This allows the kernel to build
with CONFIG_RUST=y on macOS.
Link: https://github.com/rust-lang/rust/blob/d829780/compiler/rustc_metadata/src/locator.rs#L728-L752
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Co-developed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241216-b4-dylib-host-macos-v7-1-cfc507681447@gmail.com
[ Added `MAKEFLAGS=`s to avoid jobserver warnings. Removed space.
Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Running Clippy for `rusttest` code is useful to catch issues there too,
even if the code is not as critical. In the future, this code may also
run in kernelspace and could be copy-pasted. Thus it is useful to keep
it under the same standards. For instance, it will now make us add
`// SAFETY` comments.
It also makes everything more consistent.
Thus clean the few issues spotted by Clippy and start running it.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123180639.260191-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Each `bindgen` release may upgrade the list of Rust targets. For instance,
currently, in their master branch [1], the latest ones are:
Nightly => {
vectorcall_abi: #124485,
ptr_metadata: #81513,
layout_for_ptr: #69835,
},
Stable_1_77(77) => { offset_of: #106655 },
Stable_1_73(73) => { thiscall_abi: #42202 },
Stable_1_71(71) => { c_unwind_abi: #106075 },
Stable_1_68(68) => { abi_efiapi: #105795 },
By default, the highest stable release in their list is used, and users
are expected to set one if they need to support older Rust versions
(e.g. see [2]).
Thus, over time, new Rust features are used by default, and at some
point, it is likely that `bindgen` will emit Rust code that requires a
Rust version higher than our minimum (or perhaps enabling an unstable
feature). Currently, there is no problem because the maximum they have,
as seen above, is Rust 1.77.0, and our current minimum is Rust 1.78.0.
Therefore, set a Rust target explicitly now to prevent going forward in
time too much and thus getting potential build failures at some point.
Since we also support a minimum `bindgen` version, and since `bindgen`
does not support passing unknown Rust target versions, we need to use
the list of our minimum `bindgen` version, rather than the latest. So,
since `bindgen` 0.65.1 had this list [3], we need to use Rust 1.68.0:
/// Rust stable 1.64
/// * `core_ffi_c` ([Tracking issue](https://github.com/rust-lang/rust/issues/94501))
=> Stable_1_64 => 1.64;
/// Rust stable 1.68
/// * `abi_efiapi` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/65815))
=> Stable_1_68 => 1.68;
/// Nightly rust
/// * `thiscall` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/42202))
/// * `vectorcall` calling convention (no tracking issue)
/// * `c_unwind` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/74990))
=> Nightly => nightly;
...
/// Latest stable release of Rust
pub const LATEST_STABLE_RUST: RustTarget = RustTarget::Stable_1_68;
Thus add the `--rust-target 1.68` parameter. Add a comment as well
explaining this.
An alternative would be to use the currently running (i.e. actual) `rustc`
and `bindgen` versions to pick a "better" Rust target version. However,
that would introduce more moving parts depending on the user setup and
is also more complex to implement.
Starting with `bindgen` 0.71.0 [4], we will be able to set any future
Rust version instead, i.e. we will be able to set here our minimum
supported Rust version. Christian implemented it [5] after seeing this
patch. Thanks!
Cc: Christian Poveda <git@pvdrz.com>
Cc: Emilio Cobos Álvarez <emilio@crisal.io>
Cc: stable@vger.kernel.org # needed for 6.12.y; unneeded for 6.6.y; do not apply to 6.1.y
Fixes: c844fa64a2d4 ("rust: start supporting several `bindgen` versions")
Link: https://github.com/rust-lang/rust-bindgen/blob/21c60f473f4e824d4aa9b2b508056320d474b110/bindgen/features.rs#L97-L105 [1]
Link: https://github.com/rust-lang/rust-bindgen/issues/2960 [2]
Link: https://github.com/rust-lang/rust-bindgen/blob/7d243056d335fdc4537f7bca73c06d01aae24ddc/bindgen/features.rs#L131-L150 [3]
Link: https://github.com/rust-lang/rust-bindgen/blob/main/CHANGELOG.md#0710-2024-12-06 [4]
Link: https://github.com/rust-lang/rust-bindgen/pull/2993 [5]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123180323.255997-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
|
|
Currently, Kbuild always operates in the output directory of the kernel,
even when building external modules. This increases the risk of external
module Makefiles attempting to write to the kernel directory.
This commit switches the working directory to the external module
directory, allowing the removal of the $(KBUILD_EXTMOD)/ prefix from
some build artifacts.
The command for building external modules maintains backward
compatibility, but Makefiles that rely on working in the kernel
directory may break. In such cases, $(objtree) and $(srctree) should
be used to refer to the output and source directories of the kernel.
The appearance of the build log will change as follows:
[Before]
$ make -C /path/to/my/linux M=/path/to/my/externel/module
make: Entering directory '/path/to/my/linux'
CC [M] /path/to/my/externel/module/helloworld.o
MODPOST /path/to/my/externel/module/Module.symvers
CC [M] /path/to/my/externel/module/helloworld.mod.o
CC [M] /path/to/my/externel/module/.module-common.o
LD [M] /path/to/my/externel/module/helloworld.ko
make: Leaving directory '/path/to/my/linux'
[After]
$ make -C /path/to/my/linux M=/path/to/my/externel/module
make: Entering directory '/path/to/my/linux'
make[1]: Entering directory '/path/to/my/externel/module'
CC [M] helloworld.o
MODPOST Module.symvers
CC [M] helloworld.mod.o
CC [M] .module-common.o
LD [M] helloworld.ko
make[1]: Leaving directory '/path/to/my/externel/module'
make: Leaving directory '/path/to/my/linux'
Printing "Entering directory" twice is cumbersome. This will be
addressed later.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a
frequent source of review comments, thus having the compiler guide
new developers on where they are expected (and where not) is very
nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up
locally ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance,
our first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is
the support to write custom types that can be used as 'self', i.e.
as receivers, since the kernel needs to write types such as 'Arc'
that common userspace Rust would not. 'arbitrary_self_types' has
been accepted to become stable, and this is one of the steps
required to get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize'
instead of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some
distributions backported the fix (e.g. Debian -- thanks!). All
major distributions we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the
extension traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type
'T' that is also generic over an allocator and considers the
kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add
'ArrayLayout' type. Add 'Vec' (a contiguous growable array type)
and its shorthand aliases '{K,V,KV}Vec', including iterator
support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes"
* tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits)
rust: alloc: Fix `ArrayLayout` allocations
docs: rust: remove spurious item in `expect` list
rust: allow `clippy::needless_lifetimes`
rust: warn on bindgen < 0.69.5 and libclang >= 19.1
rust: use custom FFI integer types
rust: map `__kernel_size_t` and friends also to usize/isize
rust: fix size_t in bindgen prototypes of C builtins
rust: sync: add global lock support
rust: macros: enable the rest of the tests
rust: macros: enable paste! use from macro_rules!
rust: enable macros::module! tests
rust: kbuild: expand rusttest target for macros
rust: types: extend `Opaque` documentation
rust: block: fix formatting of `kernel::block::mq::request` module
rust: macros: fix documentation of the paste! macro
rust: kernel: fix THIS_MODULE header path in ThisModule doc comment
rust: page: add Rust version of PAGE_ALIGN
rust: helpers: remove unnecessary header includes
rust: exports: improve grammar in commentary
drm/panic: allow verbose version check
...
|
|
After a source tree build of the kernel, and having used the `RSCPP`
rule, running `rustfmt` fails with:
error: macros that expand to items must be delimited with braces or followed by a semicolon
--> rust/kernel/arch_static_branch_asm.rs:1:27
|
1 | ...ls!("1: jmp " ... ".popsection \n\t")
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
help: change the delimiters to curly braces
|
1 | ::kernel::concat_literals!{"1: jmp " ... ".popsection \n\t"}
| ~ ~
help: add a semicolon
|
1 | ::kernel::concat_literals!("1: jmp " ... ".popsection \n\t");
| +
This file is not meant to be formatted nor works on its own since it is
meant to be textually included.
Thus skip formatting it by prefixing its name with `generated_`.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/20241120175916.58860-1-ojeda@kernel.org
Fixes: 169484ab6677 ("rust: add arch_static_branch")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently FFI integer types are defined in libcore. This commit creates
the `ffi` crate and asks bindgen to use that crate for FFI integer types
instead of `core::ffi`.
This commit is preparatory and no type changes are made in this commit
yet.
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240913213041.395655-4-gary@garyguo.net
[ Added `rustdoc`, `rusttest` and KUnit tests support. Rebased on top of
`rust-next` (e.g. migrated more `core::ffi` cases). Reworded crate
docs slightly and formatted. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Without `-fno-builtin`, for functions like memcpy/memmove (and many
others), bindgen seems to be using the clang-provided prototype. This
prototype is ABI-wise compatible, but the issue is that it does not have
the same information as the source code w.r.t. typedefs.
For example, bindgen generates the following:
extern "C" {
pub fn strlen(s: *const core::ffi::c_char) -> core::ffi::c_ulong;
}
note that the return type is `c_ulong` (i.e. unsigned long), despite the
size_t-is-usize behavior (this is default, and we have not opted out
from it using --no-size_t-is-usize).
Similarly, memchr's size argument should be of type `__kernel_size_t`,
but bindgen generates `c_ulong` directly.
We want to ensure any `size_t` is translated to Rust `usize` so that we
can avoid having them be different type on 32-bit and 64-bit
architectures, and hence would require a lot of excessive type casts
when calling FFI functions.
I found that this bindgen behavior (which probably is caused by
libclang) can be disabled by `-fno-builtin`. Using the flag for compiled
code can result in less optimisation because compiler cannot assume
about their properties anymore, but this should not affect bindgen.
[ Trevor asked: "I wonder how reliable this behavior is. Maybe bindgen
could do a better job controlling this, is there an open issue?".
Gary replied: ..."apparently this is indeed the suggested approach in
https://github.com/rust-lang/rust-bindgen/issues/1770". - Miguel ]
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240913213041.395655-2-gary@garyguo.net
[ Formatted comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
To allow the Rust implementation of static_key_false to use runtime code
patching instead of the generic implementation, pull in the relevant
inline assembly from the jump_label.h header by running the C
preprocessor on a .rs.S file. Build rules are added for .rs.S files.
Since the relevant inline asm has been adjusted to export the inline asm
via the ARCH_STATIC_BRANCH_ASM macro in a consistent way, the Rust side
does not need architecture specific code to pull in the asm.
It is not possible to use the existing C implementation of
arch_static_branch via a Rust helper because it passes the argument
`key` to inline assembly as an 'i' parameter. Any attempt to add a C
helper for this function will fail to compile because the value of `key`
must be known at compile-time.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: " =?utf-8?q?Bj=C3=B6rn_Roy_Baron?= " <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Link: https://lore.kernel.org/20241030-tracepoint-v12-5-eec7f0f8ad22@google.com
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Previously, these tests were ignored due to a missing necessary dependency
on the `kernel` crate. Enable the tests, and update them: for both,
add the parameter to `init()`; for the first one, remove the use of a
kernel parameter mechanism that was never merged.
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-3-ethan.twardy@gmail.com
[ Rebased (moved the `export` to the `rustdoc_test` rule, enable the
firmware example too). Removed `export` for `RUST_MODFILE`. Removed
unneeded `rust` language in examples, as well as `#[macro_use]`
`extern`s. Reworded accordingly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Previously, the rusttest target for the macros crate did not specify
the dependencies necessary to run the rustdoc tests. These tests rely on
the kernel crate, so add the dependencies.
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-2-ethan.twardy@gmail.com
[ Rebased (`alloc` is gone nowadays, sysroot handling is simpler) and
simplified (reused `rustdoc_test` rule instead of adding a new one,
no need for `rustdoc-compiler_builtins`, removed unneeded `macros`
explicit path). Made `vtable` example fail (avoiding to increase
the complexity in the `rusttest` target). Removed unstable
`-Zproc-macro-backtrace` option. Reworded accordingly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Now that we have our own `Allocator`, `Box` and `Vec` types we can remove
Rust's `alloc` crate and the `new_uninit` unstable feature.
Also remove `Kmalloc`'s `GlobalAlloc` implementation -- we can't remove
this in a separate patch, since the `alloc` crate requires a
`#[global_allocator]` to set, that implements `GlobalAlloc`.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-29-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In Rust 1.71.0, `rustdoc` added the `unescaped_backticks` lint, which
detects what are typically typos in Markdown formatting regarding inline
code [1], e.g. from the Rust standard library:
/// ... to `deref`/`deref_mut`` must ...
/// ... use [`from_mut`]`. Specifically, ...
It does not seem to have almost any false positives, from the experience
of enabling it in the Rust standard library [2], which will be checked
starting with Rust 1.82.0. The maintainers also confirmed it is ready
to be used.
Thus enable it.
Link: https://doc.rust-lang.org/rustdoc/lints.html#unescaped_backticks [1]
Link: https://github.com/rust-lang/rust/pull/128307 [2]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
|
|
Make it possible to use the Control Flow Integrity (CFI) sanitizer when
Rust is enabled. Enabling CFI with Rust requires that CFI is configured
to normalize integer types so that all integer types of the same size
and signedness are compatible under CFI.
Rust and C use the same LLVM backend for code generation, so Rust KCFI
is compatible with the KCFI used in the kernel for C. In the case of
FineIBT, CFI also depends on -Zpatchable-function-entry for rewriting
the function prologue, so we set that flag for Rust as well. The flag
for FineIBT requires rustc 1.80.0 or later, so include a Kconfig
requirement for that.
Enabling Rust will select CFI_ICALL_NORMALIZE_INTEGERS because the flag
is required to use Rust with CFI. Using select rather than `depends on`
avoids the case where Rust is not visible in menuconfig due to
CFI_ICALL_NORMALIZE_INTEGERS not being enabled. One disadvantage of
select is that RUST must `depends on` all of the things that
CFI_ICALL_NORMALIZE_INTEGERS depends on to avoid invalid configurations.
Alice has been using KCFI on her phone for several months, so it is
reasonably well tested on arm64.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801-kcfi-v2-2-c93caed3d121@google.com
[ Replaced `!FINEIBT` requirement with `!CALL_PADDING` to prevent
a build error on older Rust compilers. Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
With the `RUSTC_VERSION_TEXT` rebuild support in place, now proc macros
can depend on that instead of `core.o`.
This means that both the `core` and `macros` crates can be built in
parallel, and that touching `core.o` does not trigger a rebuild of the
proc macros.
This could be accomplished using the same approach as for `core`
(i.e. depending directly on `include/config/RUSTC_VERSION_TEXT`). However,
that is considered an implementation detail [1], and thus it is best
to avoid it. Instead, let fixdep find a string that we explicitly
write down in the source code for this purpose (like it is done for
`include/linux/compiler-version.h`), which we can easily do (unlike for
`core`) since this is our own source code.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQBG0nDupXSgAAk-6nOqeqGVkr3H1RjYaqRJ1OxmLm6xA@mail.gmail.com/ [1]
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Now that `RUSTC_VERSION_TEXT` exists, use it to rebuild `core` when the
version text changes (which in turn will trigger a rebuild of all the
kernel Rust code).
This also applies to proc macros (which only work with the `rustc` that
compiled them), via the already existing dependency on `core.o`. That
is cleaned up in the next commit.
However, this does not cover host programs written in Rust, which is
the same case in the C side.
This is accomplished by referencing directly the generated file, instead
of using the `fixdep` header trick, since we cannot change the Rust
standard library sources. This is not too much of a burden, since it
only needs to be done for `core`.
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In Rust 1.56.0 [1], rustdoc introduced the "jump to definition"
feature [2], i.e. the unstable flag `--generate-link-to-definition`.
It adds links to the source view of the documentation.
For instance, in the source view of `rust/kernel/sync.rs`, for this code:
impl Default for LockClassKey {
fn default() -> Self {
Self::new()
}
}
It will add three hyperlinks:
- `Default` points to the rendered "Trait `core::default::Default`"
page (not the source view, since it goes to another crate, though
this may change).
- `LockClassKey` points to the `pub struct LockClassKey(...);` line
in the same page, highlighting the line number.
- `Self::new()` points to the `pub const fn new() -> Self { ... }`
associated function, highlighting its line numbers (i.e. for the
full function).
This makes the source view more useful and a bit closer to the experience
in e.g. the Elixir Cross Referencer [3].
I have provisionally enabled it for rust.docs.kernel.org [4] -- one can
take a look at the source view there for an example of how it looks like.
Thus enable it.
Cc: Guillaume Gomez <guillaume1.gomez@gmail.com>
Link: https://github.com/rust-lang/rust/pull/84176 [1]
Link: https://github.com/rust-lang/rust/issues/89095 [2]
Link: https://elixir.bootlin.com [3]
Link: https://rust.docs.kernel.org [4]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240818141249.387166-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Symbols in the bss segment are not currently exported. This is a problem
for Rust modules that link against statics, that are resident in the kernel
image. Thus export symbols in the bss segment.
Fixes: 2f7ab1267dc9 ("Kbuild: add Rust support")
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240815074519.2684107-2-nmi@metaspace.dk
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
`bindgen` is able to detect certain function attributes and annotate
functions correspondingly in its output for the Rust side, when the
`--enable-function-attribute-detection` is passed.
In particular, it is currently able to use `__must_check` in C
(`#[must_use]` in Rust), which give us a bunch of annotations that are
nice to have to prevent possible issues in Rust abstractions, e.g.:
extern "C" {
+ #[must_use]
pub fn kobject_add(
kobj: *mut kobject,
parent: *mut kobject,
fmt: *const core::ffi::c_char,
...
) -> core::ffi::c_int;
}
Apparently, there are edge cases where this can make generation very slow,
which is why it is behind a flag [1], but it does not seem to affect us
in any major way at the moment.
Thus enable it.
Link: https://github.com/rust-lang/rust-bindgen/issues/1465 [1]
Link: https://lore.kernel.org/rust-for-linux/CANiq72=u5Nrz_NW3U3_VqywJkD8pECA07q2pFDd1wjtXOWdkAQ@mail.gmail.com/
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20240814163722.1550064-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This removes the need to explicitly export all symbols.
Generate helper exports similarly to what's currently done for Rust
crates. These helpers are exclusively called from within Rust code and
therefore can be treated similar as other Rust symbols.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240817165302.3852499-1-gary@garyguo.net
[ Fixed dependency path, reworded slightly, edited comment a bit and
rebased on top of the changes made when applying Andreas' patch
(e.g. no `README.md` anymore, so moved the edits). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Now that we should be `objtool`-warning free, enable `objtool` for
Rust too.
Before this patch series, we were already getting warnings under e.g. IBT
builds, since those would see Rust code via `vmlinux.o`.
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240725183325.122827-7-ojeda@kernel.org
[ Solved trivial conflict. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
