| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "zram: support algorithm-specific parameters" from Sergey Senozhatsky
adds infrastructure for passing algorithm-specific parameters into
zram. A single parameter `winbits' is implemented at this time.
- "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
charging nmi-safe, which is required by BFP, which can operate in NMI
context.
- "Some random fixes and cleanup to shmem" from Kemeng Shi implements
small fixes and cleanups in the shmem code.
- "Skip mm selftests instead when kernel features are not present" from
Zi Yan fixes some issues in the MM selftest code.
- "mm/damon: build-enable essential DAMON components by default" from
SeongJae Park reworks DAMON Kconfig to make it easier to enable
CONFIG_DAMON.
- "sched/numa: add statistics of numa balance task migration" from Libo
Chen adds more info into sysfs and procfs files to improve visibility
into the NUMA balancer's task migration activity.
- "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
provides various updates to some of the MM selftests to make them
play better with the overall containing framework.
* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
mm/khugepaged: clean up refcount check using folio_expected_ref_count()
selftests/mm: fix test result reporting in gup_longterm
selftests/mm: report unique test names for each cow test
selftests/mm: add helper for logging test start and results
selftests/mm: use standard ksft_finished() in cow and gup_longterm
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
sched/numa: add statistics of numa balance task
sched/numa: fix task swap by skipping kernel threads
tools/testing: check correct variable in open_procmap()
tools/testing/vma: add missing function stub
mm/gup: update comment explaining why gup_fast() disables IRQs
selftests/mm: two fixes for the pfnmap test
mm/khugepaged: fix race with folio split/free using temporary reference
mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
mmu_notifiers: remove leftover stub macros
selftests/mm: deduplicate test names in madv_populate
kcov: rust: add flags for KCOV with Rust
mm: rust: make CONFIG_MMU ifdefs more narrow
mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
mm/damon/Kconfig: enable CONFIG_DAMON by default
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix the AT_HANDLE_CONNECTABLE option so filesystems that don't know
how to decode a connected non-dir dentry fail the request
- Use repr(transparent) to ensure identical layout between the C and
Rust implementation of struct file
- Add a missing xas_pause() into the dax code employing
wait_entry_unlocked_exclusive()
- Fix FOP_DONTCACHE which we disabled for v6.15.
A folio could get redirtied and/or scheduled for writeback after the
initial dropbehind test. Change the test accordingly to handle these
cases so we can re-enable FOP_DONTCACHE again
* tag 'vfs-6.16-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
exportfs: require ->fh_to_parent() to encode connectable file handles
rust: file: improve safety comments
rust: file: mark `LocalFile` as `repr(transparent)`
fs/dax: Fix "don't skip locked entries when scanning entries"
iomap: don't lose folio dropbehind state for overwrites
mm/filemap: unify dropbehind flag testing and clearing
mm/filemap: unify read/write dropbehind naming
Revert "Disable FOP_DONTCACHE for now due to bugs"
mm/filemap: use filemap_end_dropbehind() for read invalidation
mm/filemap: gate dropbehind invalidate on folio !dirty && !writeback
|
|
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
|
|
Rust code is currently not instrumented properly when KCOV is enabled.
Thus, add the relevant flags to perform instrumentation correctly. This
is necessary for efficient fuzzing of Rust code.
The sanitizer-coverage features of LLVM have existed for long enough
that they are available on any LLVM version supported by rustc, so we do
not need any Kconfig feature detection. The coverage level is set to 3,
as that is the level needed by trace-pc.
We do not instrument `core` since when we fuzz the kernel, we are
looking for bugs in the kernel, not the Rust stdlib.
Link: https://lkml.kernel.org/r/20250501-rust-kcov-v2-1-b71e83e9779f@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Aleksandr Nogikh <nogikh@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently the entire kernel::mm module is ifdef'd out when CONFIG_MMU=n.
However, there are some downstream users of the module in
rust/kernel/task.rs and rust/kernel/miscdevice.rs. Thus, update the cfgs
so that only MmWithUserAsync is removed with CONFIG_MMU=n.
The code is moved into a new file, since the #[cfg()] annotation
otherwise has to be duplicated several times.
Link: https://lkml.kernel.org/r/20250516193219.2987032-1-aliceryhl@google.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505071753.kldNHYVQ-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202505072116.eSYC8igT-lkp@intel.com/
Fixes: 5bb9ed6cdfeb ("mm: rust: add abstraction for struct mm_struct")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
Merge Rust support for cpufreq and OPP, a new Rust-based cpufreq-dt
driver, an SCMI cpufreq driver cleanup, and an ACPI cpufreq driver
regression fix:
- Add Rust abstractions for CPUFreq framework (Viresh Kumar).
- Add Rust abstractions for OPP framework (Viresh Kumar).
- Add basic Rust abstractions for Clk and Cpumask frameworks (Viresh
Kumar).
- Clean up the SCMI cpufreq driver somewhat (Mike Tipton).
- Use KHz as the nominal_freq units in get_max_boost_ratio() in the
ACPI cpufreq driver (iGautham Shenoy).
* pm-cpufreq:
acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio()
rust: opp: Move `cfg(CONFIG_OF)` attribute to the top of doc test
rust: opp: Make the doctest example depend on CONFIG_OF
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
rust: cpumask: Add few more helpers
|
|
Some of the safety comments in `LocalFile`'s methods incorrectly refer to
the `File` type instead of `LocalFile`, so fix them to use the correct
type.
Also add missing Markdown code spans around lifetimes in the safety
comments, i.e. change 'a to `'a`.
Link: https://github.com/Rust-for-Linux/linux/issues/1165
Signed-off-by: Pekka Ristola <pekkarr@protonmail.com>
Link: https://lore.kernel.org/20250527204636.12573-2-pekkarr@protonmail.com
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unsafe code in `LocalFile`'s methods assumes that the type has the same
layout as the inner `bindings::file`. This is not guaranteed by the default
struct representation in Rust, but requires specifying the `transparent`
representation.
The `File` struct (which also wraps `bindings::file`) is already marked as
`repr(transparent)`, so this change makes their layouts equivalent.
Fixes: 851849824bb5 ("rust: file: add Rust abstraction for `struct file`")
Closes: https://github.com/Rust-for-Linux/linux/issues/1165
Signed-off-by: Pekka Ristola <pekkarr@protonmail.com>
Link: https://lore.kernel.org/20250527204636.12573-1-pekkarr@protonmail.com
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Correct the typo (s/much/must) in the ListArc documentation.
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1166
Fixes: a48026315cd7 ("rust: list: add tracking for ListArc")
Signed-off-by: Sylvan Smit <sylvan@sylvansmit.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250529162923.434978-1-sylvan@sylvansmit.com
[ Changed tag to "Reported-by" and sorted. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a compile-time check that `*$ptr` is of the type of `$type->$($f)*`.
Rename those placeholders for clarity.
Given the incorrect usage:
> diff --git a/rust/kernel/rbtree.rs b/rust/kernel/rbtree.rs
> index 8d978c896747..6a7089149878 100644
> --- a/rust/kernel/rbtree.rs
> +++ b/rust/kernel/rbtree.rs
> @@ -329,7 +329,7 @@ fn raw_entry(&mut self, key: &K) -> RawEntry<'_, K, V> {
> while !(*child_field_of_parent).is_null() {
> let curr = *child_field_of_parent;
> // SAFETY: All links fields we create are in a `Node<K, V>`.
> - let node = unsafe { container_of!(curr, Node<K, V>, links) };
> + let node = unsafe { container_of!(curr, Node<K, V>, key) };
>
> // SAFETY: `node` is a non-null node so it is valid by the type invariants.
> match key.cmp(unsafe { &(*node).key }) {
this patch produces the compilation error:
> error[E0308]: mismatched types
> --> rust/kernel/lib.rs:220:45
> |
> 220 | $crate::assert_same_type(field_ptr, (&raw const (*container_ptr).$($fields)*).cast_mut());
> | ------------------------ --------- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected `*mut rb_node`, found `*mut K`
> | | |
> | | expected all arguments to be this `*mut bindings::rb_node` type because they need to match the type of this parameter
> | arguments to this function are incorrect
> |
> ::: rust/kernel/rbtree.rs:270:6
> |
> 270 | impl<K, V> RBTree<K, V>
> | - found this type parameter
> ...
> 332 | let node = unsafe { container_of!(curr, Node<K, V>, key) };
> | ------------------------------------ in this macro invocation
> |
> = note: expected raw pointer `*mut bindings::rb_node`
> found raw pointer `*mut K`
> note: function defined here
> --> rust/kernel/lib.rs:227:8
> |
> 227 | pub fn assert_same_type<T>(_: T, _: T) {}
> | ^^^^^^^^^^^^^^^^ - ---- ---- this parameter needs to match the `*mut bindings::rb_node` type of parameter #1
> | | |
> | | parameter #2 needs to match the `*mut bindings::rb_node` type of this parameter
> | parameter #1 and parameter #2 both reference this parameter `T`
> = note: this error originates in the macro `container_of` (in Nightly builds, run with -Z macro-backtrace for more info)
[ We decided to go with a variation of v1 [1] that became v4, since it
seems like the obvious approach, the error messages seem good enough
and the debug performance should be fine, given the kernel is always
built with -O2.
In the future, we may want to make the helper non-hidden, with
proper documentation, for others to use.
[1] https://lore.kernel.org/rust-for-linux/CANiq72kQWNfSV0KK6qs6oJt+aGdgY=hXg=wJcmK3zYcokY1LNw@mail.gmail.com/
- Miguel ]
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/all/CAH5fLgh6gmqGBhPMi2SKn7mCmMWfOSiS0WP5wBuGPYh9ZTAiww@mail.gmail.com/
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250529-b4-container-of-type-check-v4-1-bf3a7ad73cec@gmail.com
[ Added intra-doc link. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Implement `HasWork::work_container_of` in `impl_has_work!`, narrowing
the interface of `HasWork` and replacing pointer arithmetic with
`container_of!`. Remove the provided implementation of
`HasWork::get_work_offset` without replacement; an implementation is
already generated in `impl_has_work!`. Remove the `Self: Sized` bound on
`HasWork::work_container_of` which was apparently necessary to access
`OFFSET` as `OFFSET` no longer exists.
A similar API change was discussed on the hrtimer series[1].
Link: https://lore.kernel.org/all/20250224-hrtimer-v3-v6-12-rc2-v9-1-5bd3bf0ce6cc@kernel.org/ [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250411-no-offset-v3-1-c0b174640ec3@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
Avoid casting the input pointer to `*const _`, allowing the output
pointer to be `*mut` if the input is `*mut`. This allows a number of
`*const` to `*mut` conversions to be removed at the cost of slightly
worse ergonomics when the macro is used with a reference rather than a
pointer; the only example of this was in the macro's own doctest.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250409-container-of-mutness-v1-1-64f472b94534@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
|
|
After commit c5b6ababd21a ("locking/mutex: implement mutex_trylock_nested",
currently in the KVM tree) mutex_trylock() will be a macro when lockdep is
enabled. Rust therefore needs the corresponding helper. Just add it and
the rust/bindings/bindings_helpers_generated.rs Makefile rules will do
their thing.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250528083431.1875345-1-pbonzini@redhat.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since now we have support for returning `-> Result`s, we can convert some
of these tests to use the feature, and serve as a first user for it too.
Thus convert them, which allows us to remove some `unwrap()`s.
We keep the actual assertions we want to make as explicit ones with
`assert*!`s.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-6-ojeda@kernel.org
[ Split the `CString` simplification into a new commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Simplify the `format!` macro used in the tests by using
`CString::try_from_fmt` and directly `unwrap()`ing.
This will allow us to change both `unwrap()`s here in order to showcase
the `?` operator support now that the tests are KUnit ones.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
[ Split from the next commit as suggested by Tamir. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In general, we should aim to test as much as possible within the actual
kernel, and not in the build host.
Thus convert these `rusttest` tests into KUnit tests.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
It is convenient to have certain things in the `kernel` prelude, and
means kernel developers will find it even easier to start writing tests.
And, anyway, nobody should need to use this identifier for anything else.
Thus add it to the prelude.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Currently, return values of KUnit `#[test]` functions are ignored.
Thus introduce support for `-> Result` functions by checking their
returned values.
At the same time, require that test functions return `()` or `Result<T,
E>`, which should avoid mistakes, especially with non-`#[must_use]`
types. Other types can be supported in the future if needed.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will output:
[ 3.744214] KTAP version 1
[ 3.744287] # Subtest: my_test_suite
[ 3.744378] # speed: normal
[ 3.744399] 1..1
[ 3.745817] # my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
[ 3.745817] Expected is_test_result_ok(my_test()) to be true, but is false
[ 3.747152] # my_test.speed: normal
[ 3.747199] not ok 1 my_test
[ 3.747345] not ok 4 my_test_suite
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-3-ojeda@kernel.org
[ Used `::kernel` for paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The KUnit `#[test]` support that landed recently is very basic and does
not map the `assert*!` macros into KUnit like the doctests do, so they
panic at the moment.
Thus implement the custom mapping in a similar way to doctests, reusing
the infrastructure there.
In Rust 1.88.0, the `file()` method in `Span` may be stable [1]. However,
it was changed recently (from `SourceFile`), so we need to do something
different in previous versions. Thus create a helper for it and use it
to get the path.
With this, a failing test suite like:
#[kunit_tests(my_test_suite)]
mod tests {
use super::*;
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
#[test]
fn my_second_test() {
assert!(42 >= 43);
}
}
will properly map back to KUnit, printing something like:
[ 1.924325] KTAP version 1
[ 1.924421] # Subtest: my_test_suite
[ 1.924506] # speed: normal
[ 1.924525] 1..2
[ 1.926385] # my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
[ 1.926385] Expected 42 == 43 to be true, but is false
[ 1.928026] # my_first_test.speed: normal
[ 1.928075] not ok 1 my_first_test
[ 1.928723] # my_second_test: ASSERTION FAILED at rust/kernel/lib.rs:256
[ 1.928723] Expected 42 >= 43 to be true, but is false
[ 1.929834] # my_second_test.speed: normal
[ 1.929868] not ok 2 my_second_test
[ 1.930032] # my_test_suite: pass:0 fail:2 skip:0 total:2
[ 1.930153] # Totals: pass:0 fail:2 skip:0 total
Link: https://github.com/rust-lang/rust/pull/140514 [1]
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250502215133.1923676-2-ojeda@kernel.org
[ Required `KUNIT=y` like for doctests. Used the `cfg_attr` from the
TODO comment and clarified its comment now that the stabilization is
in beta and thus quite likely stable in Rust 1.88.0. Simplified the
`new_body` code by introducing a new variable. Added
`#[allow(clippy::incompatible_msrv)]`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Move the `#[cfg(CONFIG_OF)]` attribute to the top of the documentation test
block and hide it. This applies the condition to the entire test and improves
readability.
Placing configuration flags like `CONFIG_OF` at the top serves as a clear
indicator of the conditions under which the example is valid, effectively
acting like configuration metadata for the example itself.
Suggested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d93c783cc4419f16dd8942a4359d74bc0149203.1748323971.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Joel Fernandes:
- Removed swake_up_one_online() workaround
- Reverted an incorrect rcuog wake-up fix from offline softirq
- Rust RCU Guard methods marked as inline
- Updated MAINTAINERS with Joel’s and Zqiang's new email address
- Replaced magic constant in rcu_seq_done_exact() with named constant
- Added warning mechanism to validate rcu_seq_done_exact()
- Switched SRCU polling API to use rcu_seq_done_exact()
- Commented on redundant delta check in rcu_seq_done_exact()
- Made ->gpwrap tests in rcutorture more frequent
- Fixed reuse of ARM64 images in rcutorture
- rcutorture improved to check Kconfig and reader conflict handling
- Extracted logic from rcu_torture_one_read() for clarity
- Updated LWN RCU API documentation links
- Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
- Added tests for SRCU up/down reader primitives
- Added comments and delays checks in rcutorture
- Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
- Added --do-normal and --do-no-normal to torture.sh
- Added RCU Rust binding tests to torture.sh
- Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
- Replaced kmalloc() with kcalloc() in rcuscale
- Refined listRCU example code for stale data elimination
- Fixed hardirq count bug for x86 in cpu_stall_cputime
- Added safety checks in rcu/nocb for offloaded rdp access
- Other miscellaneous changes
* tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (27 commits)
rcutorture: Fix issue with re-using old images on ARM64
rcutorture: Remove MAXSMP and CPUMASK_OFFSTACK from TREE01
rcutorture: Reduce TREE01 CPU overcommit
torture: Check for "Call trace:" as well as "Call Trace:"
rcutorture: Perform more frequent testing of ->gpwrap
torture: Add testing of RCU's Rust bindings to torture.sh
torture: Add --do-{,no-}normal to torture.sh
checkpatch: Deprecate srcu_read_lock_lite() and srcu_read_unlock_lite()
rcutorture: Comment invocations of tick_dep_set_task()
rcu/nocb: Add Safe checks for access offloaded rdp
rcuscale: using kcalloc() to relpace kmalloc()
doc/RCU/listRCU: refine example code for eliminating stale data
doc: Update LWN RCU API links in whatisRCU.rst
Revert "rcu/nocb: Fix rcuog wake-up from offline softirq"
rust: sync: rcu: Mark Guard methods as inline
rcu/cpu_stall_cputime: fix the hardirq count for x86 architecture
rcu: Remove swake_up_one_online() bandaid
MAINTAINERS: Update Zqiang's email address
rcutorture: Make torture.sh --do-rt use CONFIG_PREEMPT_RT
srcu: Use rcu_seq_done_exact() for polling API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux
Pull configfs updates from Andreas Hindborg:
- Allow creation of rw files with custom permissions. This allows
drivers to better protect secrets written through configfs
- Fix a bug where an error condition did not cause an early return
while populating attributes
- Report ENOMEM rather than EFAULT when kvasprintf() fails in
config_item_set_name()
- Add a Rust API for configfs. This allows Rust drivers to use configfs
through a memory safe interface
* tag 'configfs-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux:
MAINTAINERS: add configfs Rust abstractions
rust: configfs: add a sample demonstrating configfs usage
rust: configfs: introduce rust support for configfs
configfs: Correct error value returned by API config_item_set_name()
configfs: Do not override creating attribute file failure in populate_attrs()
configfs: Delete semicolon from macro type_print() definition
configfs: Add CONFIGFS_ATTR_PERM helper
|
|
Clean Rust documentation section headers to use plural names.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1110
Signed-off-by: Patrick Miller <paddymills@proton.me>
Link: https://lore.kernel.org/r/20241002022749.390836-1-paddymills@proton.me
[ Removed the `init` one that doesn't apply anymore and
reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Commit dbd5058ba60c ("rust: make pin-init its own crate") moved all
items from pin-init into the pin-init crate, including the
`assert_pinned!` macro.
Thus fix the path of the sole user of the `assert_pinned!` macro.
This occurrence was missed in the commit above, since it is in a macro
rule that has no current users (although binder is a future user).
Cc: stable@kernel.org
Fixes: dbd5058ba60c ("rust: make pin-init its own crate")
Signed-off-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250525173450.853413-1-lossin@kernel.org
[ Reworded slightly as discussed in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The doctest example uses a function only available for CONFIG_OF and so
the build with doc tests fails when it isn't enabled.
error[E0599]: no function or associated item named `from_of_cpumask`
found for struct `rust_doctest_kernel_alloc_kbox_rs_4::kernel::opp::Table`
in the current scope
Fix this by making the doctest depend on CONFIG_OF.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505260856.ZQWHW2xT-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/a80bfedcb4d94531dc27d3b48062db5042078e88.1748237646.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rust 1.87 (released on 2025-05-15) compiles core library with edition
2024 instead of 2021 [1]. Ensure that the edition matches libcore's
expectation to avoid potential breakage.
[ J3m3 reported in Zulip [2] that the `rust-analyzer` target was
broken after this patch -- indeed, we need to avoid `core-cfgs`
since those are passed to the `rust-analyzer` target.
So, instead, I tweaked the patch to create a new `core-edition`
variable and explicitly mention the `--edition` flag instead of
reusing `core-cfg`s.
In addition, pass a new argument using this new variable to
`generate_rust_analyzer.py` so that we set the right edition there.
By the way, for future reference: the `filter-out` change is needed
for Rust < 1.87, since otherwise we would skip the `--edition=2021`
we just added, ending up with no edition flag, and thus the compiler
would default to the 2015 one.
[2] https://rust-for-linux.zulipchat.com/#narrow/channel/291565/topic/x/near/520206547
- Miguel ]
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/138162 [1]
Reported-by: est31 <est31@protonmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1163
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250517085600.2857460-1-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add missing Markdown code span.
This was found using the Clippy `doc_markdown` lint, which we may want
to enable.
Fixes: ad2907b4e308 ("rust: add dma coherent allocator abstraction")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250324210359.1199574-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add missing Markdown code spans and also convert them into intra-doc
links.
This was found using the Clippy `doc_markdown` lint, which we may want
to enable.
Fixes: e0020ba6cbcb ("rust: add PidNamespace")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250324210359.1199574-10-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In particular:
- Add missing Markdown code spans.
- Improve title for `DeviceId`, adding a link to the struct in the
C side, rather than referring to `bindings::`.
- Convert `TODO` from documentation to a normal comment, and put code
in block.
This was found using the Clippy `doc_markdown` lint, which we may want
to enable.
Fixes: 1bd8b6b2c5d3 ("rust: pci: add basic PCI device / driver abstractions")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250324210359.1199574-8-ojeda@kernel.org
[ Prefixed link text with `struct`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add missing Markdown code span.
This was found using the Clippy `doc_markdown` lint, which we may want
to enable.
Fixes: dd09538fb409 ("rust: alloc: implement `Cmalloc` in module allocator_test")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250324210359.1199574-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add missing Markdown code spans.
This was found using the Clippy `doc_markdown` lint, which we may want
to enable.
Fixes: b6a006e21b82 ("rust: alloc: introduce allocation flags")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250324210359.1199574-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Convert `TODO` from documentation to a normal comment, and put code in
block.
This was found using the Clippy `doc_markdown` lint, which we may want
to enable.
Fixes: 683a63befc73 ("rust: platform: add basic platform device / driver abstractions")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250324210359.1199574-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Rust kernel code is supposed to use the custom mapping of C FFI types,
i.e. those from the `ffi` crate, rather than the ones coming from `core`.
Thus, to minimize mistakes and to simplify the code everywhere, just
provide them in the `kernel` prelude and ask in the Coding Guidelines
to use them directly, i.e. as a single segment path.
After this lands, we can start cleaning up the existing users.
Ideally, we would use something like Clippy's `disallowed-types` to
prevent the use of the `core` ones, but that one sees through aliases.
Link: https://lore.kernel.org/rust-for-linux/CANiq72kc4gzfieD-FjuWfELRDXXD2vLgPv4wqk3nt4pjdPQ=qg@mail.gmail.com/
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250413005650.1745894-1-ojeda@kernel.org
[ Reworded content of the documentation to focus on how to use the
aliases first. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Macros and auto-generated code should use absolute paths, `::core::...`
and `::kernel::...`, for core and kernel references.
This prevents issues where user-defined modules named `core` or `kernel`
could be picked up instead of the `core` or `kernel` crates.
Thus clean some references up.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Closes: https://github.com/Rust-for-Linux/linux/issues/1150
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250519164615.3310844-1-igor.korotin.linux@gmail.com
[ Applied `rustfmt`. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Currently rust on arm fails to compile due to '-mno-fdpic'. This flag
disables a GCC feature that we don't want for kernel builds, so let's
skip it as it doesn't apply to Clang.
UPD include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
RUSTC L rust/core.o
BINDGEN rust/bindings/bindings_generated.rs
BINDGEN rust/bindings/bindings_helpers_generated.rs
CC rust/helpers/helpers.o
Unable to generate bindings: clang diagnosed error: error: unknown argument: '-mno-fdpic'
make[2]: *** [rust/Makefile:369: rust/bindings/bindings_helpers_generated.rs] Error 1
make[2]: *** Deleting file 'rust/bindings/bindings_helpers_generated.rs'
make[2]: *** Waiting for unfinished jobs....
Unable to generate bindings: clang diagnosed error: error: unknown argument: '-mno-fdpic'
make[2]: *** [rust/Makefile:349: rust/bindings/bindings_generated.rs] Error 1
make[2]: *** Deleting file 'rust/bindings/bindings_generated.rs'
make[1]: *** [/home/pmos/build/src/linux-next-next-20250521/Makefile:1285: prepare] Error 2
make: *** [Makefile:248: __sub-make] Error 2
[ Naresh provided the draft diff [1].
Ben explained [2]:
FDPIC is only relevant with no-MMU targets, and then only for userspace.
When configured for the arm-*-uclinuxfdpiceabi target, GCC enables FDPIC
by default to facilitate compiling userspace programs. FDPIC is never
used for the kernel, and we pass -mno-fdpic when building the kernel to
override the default and make sure FDPIC is disabled.
and [3]:
-mno-fdpic disables a GCC feature that we don't want for kernel builds.
clang does not support this feature, so it always behaves as though
-mno-fdpic is passed. Therefore, it should be fine to mix the two, at
least as far as FDPIC is concerned.
[1] https://lore.kernel.org/rust-for-linux/CA+G9fYt4otQK4pHv8pJBW9e28yHSGCDncKquwuJiJ_1ou0pq0w@mail.gmail.com/
[2] https://lore.kernel.org/rust-for-linux/aAKrq2InExQk7f_k@dell-precision-5540/
[3] https://lore.kernel.org/rust-for-linux/aAo_F_UP1Gd4jHlZ@dell-precision-5540/
- Miguel ]
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYvOanQBYXKSg7C6EU30k8sTRC0JRPJXYu7wWK51w38QUQ@mail.gmail.com/
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20250522-rust-mno-fdpic-arm-fix-v2-1-a6f691d9c198@gmail.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
`bindgen` currently generates the wrong type for an `enum` when there
is a forward reference to it. For instance:
enum E;
enum E { A };
generates:
pub const E_A: E = 0;
pub type E = i32;
instead of the expected:
pub const E_A: E = 0;
pub type E = ffi::c_uint;
The issue was reported to upstream `bindgen` [1].
Now, both GCC and Clang support silently these forward references to
`enum` types, unless `-Wpedantic` is passed, and it turns out that some
headers in the kernel depend on them.
Thus, depending on how the headers are included, which in turn may depend
on the kernel configuration or the architecture, we may get a different
type on the Rust side for a given C `enum`.
That can be quite confusing, to say the least, especially since
developers may only notice issues when building for other architectures
like in [2]. In particular, they may end up forcing a cast and adding
an `#[allow(clippy::unnecessary_cast)]` like it was done in commit
94e05a66ea3e ("rust: hrtimer: allow timer restart from timer handler"),
which isn't great.
Instead, let's have a section at the top of our `bindings_helper.h` that
`#include`s the headers with the affected types -- hopefully there are
not many cases and there is a single ordering that covers all cases.
This allows us to remove the cast and the `#[allow]`, thus keeping the
correct code in the source files. When the issue gets resolved in upstream
`bindgen` (and we update our minimum `bindgen` version), we can easily
remove this section at the top.
Link: https://github.com/rust-lang/rust-bindgen/issues/3179 [1]
Link: https://lore.kernel.org/rust-for-linux/87tt7md1s6.fsf@kernel.org/ [2]
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250325184309.97170-1-ojeda@kernel.org
[ Added extra paragraph on the comment to clarify that the workaround may
not be possible in some cases. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add basic examples for the structure "List", which also serve as unit
tests for basic list methods. It includes the following manipulations:
* List creation
* List emptiness check
* List insertion through push_front(), push_back()
* List item removal through pop_front(), pop_back()
* Push one list to another through push_all_back()
The method "remove()" doesn't have an example here because insertion
with push_front() or push_back() will take the ownership of the item,
which means we can't keep any valid reference to the node we want to
remove, unless Cursor is used. The "remove" example through Cursor is
already demonstrated with commit 52ae96f5187c ("rust: list: make the
cursor point between elements").
Link: https://github.com/Rust-for-Linux/linux/issues/1121
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250311133357.90322-1-richard120310@gmail.com
[ Removed prelude import and spurious newlines. Formatted comments
with the usual style. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
"List::is_empty()" provides a straight forward convention to check
whether a given "List" is empty or not. There're numerous places in the
current implementation still use "self.first.is_null()" to perform the
equivalent check, replace them with "List::is_empty()".
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Link: https://lore.kernel.org/r/20250310073853.427954-1-richard120310@gmail.com
Reviewed-by: Benno Lossin <lossin@kernel.org>
[ Rebased dropping the cases that do not apply anymore. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Place cleanup_module() in .exit.text section. Currently,
cleanup_module() is likely placed in the .text section. It's
inconsistent with the layout of C modules, where cleanup_module() is
placed in .exit.text.
[ Boqun asked for an example of how the section changed to be
put in the log. Tomonori provided the following examples:
C module:
$ objdump -t ~/build/x86/drivers/block/loop.o|grep clean
0000000000000000 l O .exit.data 0000000000000008 __UNIQUE_ID___addressable_cleanup_module412
0000000000000000 g F .exit.text 000000000000009c cleanup_module
Rust module without this patch:
$ objdump -t ~/build/x86/samples/rust/rust_minimal.o|grep clean
00000000000002b0 g F .text 00000000000000c6 cleanup_module
0000000000000000 g O .exit.data 0000000000000008 _R...___UNIQUE_ID___addressable_cleanup_module
Rust module with this patch:
$ objdump -t ~/build/x86/samples/rust/rust_minimal.o|grep clean
0000000000000000 g F .exit.text 00000000000000c6 cleanup_module
0000000000000000 g O .exit.data 0000000000000008 _R...___UNIQUE_ID___addressable_cleanup_module
- Miguel ]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250308044506.14458-1-fujita.tomonori@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
For the Rust 1.87.0 release, Clippy was expected to warn with:
error: use `core::ptr::eq` when comparing raw pointers
--> rust/kernel/list.rs:438:12
|
438 | if self.first == item {
| ^^^^^^^^^^^^^^^^^^ help: try: `core::ptr::eq(self.first, item)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_eq
= note: `-D clippy::ptr-eq` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::ptr_eq)]`
However, a backport to relax a bit the `clippy::ptr_eq` finally landed,
and thus Clippy did not warn by the time the release happened.
Thus remove the `allow`s added back then, which were added just in case
the backport did not land in time.
See commit a39f30870927 ("rust: allow Rust 1.87.0's `clippy::ptr_eq`
lint") for details.
Link: https://github.com/rust-lang/rust/pull/140859 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250520182125.806758-1-ojeda@kernel.org
[ Reworded for clarity. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pass PHY driver pointer to .match_phy_device OP in addition to phydev.
Having access to the PHY driver struct might be useful to check the
PHY ID of the driver is being matched for in case the PHY ID scanned in
the phydev is not consistent.
A scenario for this is a PHY that change PHY ID after a firmware is
loaded, in such case, the PHY ID stored in PHY device struct is not
valid anymore and PHY will manually scan the ID in the match_phy_device
function.
Having the PHY driver info is also useful for those PHY driver that
implement multiple simple .match_phy_device OP to match specific MMD PHY
ID. With this extra info if the parsing logic is the same, the matching
function can be generalized by using the phy_id in the PHY driver
instead of hardcoding.
Rust wrapper callback is updated to align to the new match_phy_device
arguments.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org> # for Rust
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM CPUFreq updates for 6.16 from Viresh Kumar:
"- Rust abstractions for CPUFreq framework (Viresh Kumar).
- Rust abstractions for OPP framework (Viresh Kumar).
- Basic Rust abstractions for Clk and Cpumask frameworks (Viresh Kumar).
- Minor cleanup to the SCMI cpufreq driver (Mike Tipton)."
* tag 'cpufreq-arm-updates-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (24 commits)
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
rust: cpumask: Add few more helpers
rust: devres: require a bound device
rust: pci: move iomap_region() to impl Device<Bound>
rust: device: implement Bound device context
rust: pci: preserve device context in AsRef
...
|
|
Fixes one small typo (`utilties` to `utilities`) in the documentation of
`MiscDevice::ioctl`.
Fixes: f893691e7426 ("rust: miscdevice: add base miscdevice abstraction")
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250517-rust_miscdevice_fix_typo-v1-1-8c30a6237ba9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a typo ("then" to "than") in a comment.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Fixes: fffed679eeea ("rust: str: add `Formatter` type")
Link: https://lore.kernel.org/r/20250517002604.603223-1-jihed.chaibi.dev@gmail.com
[ Reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/nova into drm-next
Nova changes for v6.16
auxiliary:
- bus abstractions
- implementation for driver registration
- add sample driver
drm:
- implement __drm_dev_alloc()
- DRM core infrastructure Rust abstractions
- device, driver and registration
- DRM IOCTL
- DRM File
- GEM object
- IntoGEMObject rework
- generically implement AlwaysRefCounted through IntoGEMObject
- refactor unsound from_gem_obj() into as_ref()
- refactor into_gem_obj() into as_raw()
driver-core:
- merge topic/device-context-2025-04-17 from driver-core tree
- implement Devres::access()
- fix: doctest build under `!CONFIG_PCI`
- accessor for Device::parent()
- fix: conditionally expect `dead_code` for `parent()`
- impl TryFrom<&Device> bus devices (PCI, platform)
nova-core:
- remove completed Vec extentions from task list
- register auxiliary device for nova-drm
- derive useful traits for Chipset
- add missing GA100 chipset
- take &Device<Bound> in Gpu::new()
- infrastructure to generate register definitions
- fix register layout of NV_PMC_BOOT_0
- move Firmware into own (Rust) module
- fix: select AUXILIARY_BUS
nova-drm:
- initial driver skeleton (depends on drm and auxiliary bus
abstractions)
- fix: select AUXILIARY_BUS
Rust (dependencies):
- implement Opaque::zeroed()
- implement Revocable::try_access_with()
- implement Revocable::access()
From: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/aCxAf3RqQAXLDhAj@cassiopeiae
|
