summaryrefslogtreecommitdiff
path: root/net/mac80211/cfg.c
AgeCommit message (Collapse)AuthorFilesLines
12 dayswifi: mac80211: reject VHT opmode for unsupported channel widthsMoon Hee Lee1-0/+14
VHT operating mode notifications are not defined for channel widths below 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the VHT specification and must be rejected. Without this check, malformed notifications using these widths may reach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to invalid input. This issue was reported by syzbot. Reject these unsupported widths early in sta_link_apply_parameters() when opmode_notif is used. The accepted set includes 20, 40, 80, 160, and 80+80 MHz, which are valid for VHT. While 320 MHz is not defined for VHT, it is allowed to avoid rejecting HE or EHT clients that may still send a VHT opmode notification. Reported-by: syzbot+ededba317ddeca8b3f08@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ededba317ddeca8b3f08 Fixes: 751e7489c1d7 ("wifi: mac80211: expose ieee80211_chan_width_to_rx_bw() to drivers") Tested-by: syzbot+ededba317ddeca8b3f08@syzkaller.appspotmail.com Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com> Link: https://patch.msgid.link/20250703193756.46622-2-moonhee.lee.ca@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-21wifi: mac80211: validate SCAN_FLAG_AP in scan request during MLOAditya Kumar Singh1-1/+1
When an AP interface is already beaconing, a subsequent scan is not allowed unless the user space explicitly sets the flag NL80211_SCAN_FLAG_AP in the scan request. If this flag is not set, the scan request will be returned with the error code -EOPNOTSUPP. However, this restriction currently applies only to non-ML interfaces. For ML interfaces, scans are allowed without this flag being explicitly set by the user space which is wrong. This is because the beaconing check currently uses only the deflink, which does not get set during MLO. Hence to fix this, during MLO, use the existing helper ieee80211_num_beaconing_links() to know if any of the link is beaconing. Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250516-bug_fix_mlo_scan-v2-1-12e59d9110ac@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-16wifi: mac80211: handle non-MLO mode as well in ieee80211_num_beaconing_links()Aditya Kumar Singh1-3/+3
Currently, ieee80211_num_beaconing_links() returns 0 when the interface operates in non-ML mode. However, non-MLO mode is equivalent to having a single link. Therefore, the function can handle the non-MLO case as well. This adjustment will also eliminate the need for deflink usage in certain scenarios. Hence, implement changes to handle the non-MLO case as well. There is no change in functionality, and no existing user-visible bug is getting fixed. This update simply makes the function generic to handle all cases. Suggested-by: Johannes Berg <johannes@sipsolutions.net> Link: https://lore.kernel.org/linux-wireless/16499ad8e4b060ee04c8a8b3615fe8952aa7b07b.camel@sipsolutions.net/ Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250515-fix_num_beaconing_links-v1-1-4a39e2704314@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-09wifi: mac80211: Update MCS15 support in link_confMohan Kumar G1-0/+3
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element contains MCS15 Disable subfield as the sixth bit, which is set when MCS15 support is not enabled. Get MCS15 support from EHT operation params and add it in link_conf so that driver can use this value to know if EHT-MCS 15 reception is enabled. Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com> Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com [remove pointless !! for bool assignment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: mac80211: restructure tx profile retrieval for MLO MBSSIDRameshkumar Sundaram1-24/+40
For MBSSID, each vif (struct ieee80211_vif) stores another vif pointer for the transmitting profile of MBSSID set. This won't suffice for MLO as there may be multiple links, each of which can be part of different MBSSID sets. Hence the information needs to be stored per-link. Additionally, the transmitted profile itself may be part of an MLD hence storing vif will not suffice either. Fix MLO by storing an instance of struct ieee80211_bss_conf for each link. Modify following operations to reflect the above structure updates: - channel switch completion - BSS color change completion - Removing nontransmitted links in ieee80211_stop_mbssid() - drivers retrieving the transmitted link for beacon templates. Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: mac80211: update ML STA with EML capabilitiesRamasamy Kaliappan1-0/+3
When an AP and Non-AP MLD operates in EMLSR mode, EML capabilities advertised during Association contains information such as EMLSR transition delay, padding delay and transition timeout values. Save the EML capabilities information that is received during station addition and capabilities update in ieee80211_sta so that drivers can use it for triggering EMLSR operation. Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20250327051320.3253783-3-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18wifi: mac80211: check basic rates validity in sta_link_apply_parametersMikhail Lobanov1-6/+6
When userspace sets supported rates for a new station via NL80211_CMD_NEW_STATION, it might send a list that's empty or contains only invalid values. Currently, we process these values in sta_link_apply_parameters() without checking the result of ieee80211_parse_bitrates(), which can lead to an empty rates bitmap. A similar issue was addressed for NL80211_CMD_SET_BSS in commit ce04abc3fcc6 ("wifi: mac80211: check basic rates validity"). This patch applies the same approach in sta_link_apply_parameters() for NL80211_CMD_NEW_STATION, ensuring there is at least one valid rate by inspecting the result of ieee80211_parse_bitrates(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: b95eb7f0eee4 ("wifi: cfg80211/mac80211: separate link params from station params") Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru> Link: https://patch.msgid.link/20250317103139.17625-1-m.lobanov@rosa.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18wifi: mac80211: fix indentation in ieee80211_set_monitor_channel()Johannes Berg1-2/+2
There's some confusing indentation, I thought even that braces were missing. Fix indentation here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: cfg80211: move link reconfig parameters into a structJohannes Berg1-4/+3
Add a new struct cfg80211_ml_reconf_req to collect the link reconfiguration parameters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.0cf299c1fdd0.Id1a3b1092dc52d0d3731a8798522fdf2e052bf0b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-26wifi: mac80211: Add counter for all monitor interfacesAlexander Wetzel1-3/+2
Count open monitor interfaces regardless of the monitor interface type. The new counter virt_monitors takes over counting interfaces depending on the virtual monitor interface while monitors is used for all active monitor interfaces. This fixes monitor packet mirroring when using MONITOR_FLAG_ACTIVE or NO_VIRTUAL_MONITOR interfaces. Fixes: 286e69677065 ("wifi: mac80211: Drop cooked monitor support") Reported-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Closes: https://lore.kernel.org/r/cc715114-4e3b-619a-49dc-a4878075e1dc@quicinc.com Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Tested-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250220094139.61459-1-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: mac80211: Add support for EPCS configurationIlan Peer1-0/+9
Add support for configuring EPCS state: - When EPCS is enabled, send an EPCS enable request action frame to the AP. When the AP replies with EPCS enable response, enable EPCS by applying the QoS parameters provided by the AP. Do so for all the valid MLD links. Once EPCS is enabled, support processing of unsolicited EPCS enable response frames. - When EPCS is disabled, send an EPCS teardown request to the AP and apply the QoS parameters as obtained from the last received beacons. Do so for all the valid links. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: mac80211: Drop cooked monitor supportAlexander Wetzel1-5/+4
Hostapd switched from cooked monitor interfaces to nl80211 Dec 2011. Drop support for the outdated cooked monitor interfaces and fix creating the virtual monitor interfaces in the following cases: 1) We have one non-monitor and one monitor interface with %MONITOR_FLAG_ACTIVE enabled and then delete the non-monitor interface. 2) We only have monitor interfaces enabled on resume while at least one has %MONITOR_FLAG_ACTIVE set. Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Link: https://patch.msgid.link/20250204111352.7004-2-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: set key link ID to the deflink oneBenjamin Berg1-3/+8
When in non-MLO mode, the key ID was set to -1 even for keys that are not pairwise. Change the link ID to be the link ID of the deflink in this case so that drivers do not need to special cases for this. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.0c066f084677.I4a5c288465e75119edb6a0df90dddf6f30d14a02@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: Support dynamic link addition and removalIlan Peer1-0/+13
Add support for adding and removing station links: - Adding links is done asynchronously, i.e., first an ML reconfiguration action frame is sent to the AP requesting to add links, and only when the AP replies, links which were added successfully by the AP are added locally. - Removing links is done synchronously, i.e., the links are removed before sending the ML reconfiguration action frame to the AP (to avoid using this links after the AP MLD removed them but before the station got the ML reconfiguration response). In case the AP replies with a status indicating that a link removal was not successful, disconnect (as this should not happen an is an indication that something might be wrong on the AP MLD). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.ec0492a8dd21.I2869686642bbc0f86c40f284ebf7e6f644b551ab@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: add an option to filter a sta from being flushedMiri Korenblit1-1/+1
Sometimes we might want to flush only part of the stations of a vif, for example only the TDLS ones. To allow this, add a do_not_flush_sta argument to __sta_info_flush, which in turn, will not flush this station. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241224192322.535e1fcca192.Icecf7f443bf98c9535ce8ec03b24d0d17dfbc28e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-20Merge tag 'wireless-next-2024-12-19' of ↵Jakub Kicinski1-4/+12
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Multi-Link Operation implementation continues, both in stack and in drivers. Otherwise it has been relatively quiet. Major changes: cfg80211/mac80211 - define wiphy guard - get TX power per link - EHT 320 MHz channel support for mesh ath11k - QCA6698AQ support ath9k - RX inactivity detection rtl8xxxu - add more USB device IDs rtw88 - add more USB device IDs - enable USB RX aggregation and USB 3 to improve performance rtw89 - PowerSave flow for Multi-Link Operation * tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits) wifi: wlcore: sysfs: constify 'struct bin_attribute' wifi: brcmfmac: clarify unmodifiable headroom log message wifi: brcmfmac: add missing header include for brcmf_dbg wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() wifi: qtnfmac: fix spelling error in core.h wifi: rtw89: phy: add dummy C2H event handler for report of TAS power wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read() wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc() wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: destroy workqueue at rtl_deinit_core wifi: rtlwifi: remove unused check_buddy_priv wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2 wifi: rtw89: regd: update regulatory map to R68-R51 wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ wifi: rtw89: disable firmware training HE GI and LTF wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS wifi: rtw89: ps: refactor channel info to firmware before entering PS wifi: rtw89: ps: refactor PS flow to support MLO wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s ... ==================== Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04wifi: mac80211: get tx power per linkRameshkumar Sundaram1-4/+11
ML interfaces can have multiple affiliated links to it and hence there is a need to report tx power of specified link rather deflink. Add changes to report tx power of requested link from mac80211, also pass link id as an argument in get_tx_power op so that supported drivers can use it to report link's tx power. Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-04wifi: cfg80211: send MLO links tx power info in GET_INTERFACERameshkumar Sundaram1-0/+1
Currently, TX power is reported on interface/wdev level as part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links can be part of an interface/wdev and hence its necessary to report the TX power of each link. Add support to send tx power for all valid links of an MLD as part of NL80211_CMD_GET_INTERFACE request. As far as userspace is concerned, there is no behavioral change for Non-ML Interfaces. For ML interfaces, userspace should fetch TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched. Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: mac80211: fix station NSS capability initialization orderBenjamin Lin1-2/+2
Station's spatial streaming capability should be initialized before handling VHT OMN, because the handling requires the capability information. Fixes: a8bca3e9371d ("wifi: mac80211: track capability/opmode NSS separately") Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Link: https://patch.msgid.link/20241118080722.9603-1-benjamin-jw.lin@mediatek.com [rewrite subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: mac80211: fix a queue stall in certain cases of CSAEmmanuel Grumbach1-2/+1
If we got an unprotected action frame with CSA and then we heard the beacon with the CSA IE, we'll block the queues with the CSA reason twice. Since this reason is refcounted, we won't wake up the queues since we wake them up only once and the ref count will never reach 0. This led to blocked queues that prevented any activity (even disconnection wouldn't reset the queue state and the only way to recover would be to reload the kernel module. Fix this by not refcounting the CSA reason. It becomes now pointless to maintain the csa_blocked_queues state. Remove it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 414e090bc41d ("wifi: mac80211: restrict public action ECSA frame handling") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447 Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: cfg80211: clear link ID from bitmap during link delete after clean upAditya Kumar Singh1-1/+7
Currently, during link deletion, the link ID is first removed from the valid_links bitmap before performing any clean-up operations. However, some functions require the link ID to remain in the valid_links bitmap. One such example is cfg80211_cac_event(). The flow is - nl80211_remove_link() cfg80211_remove_link() ieee80211_del_intf_link() ieee80211_vif_set_links() ieee80211_vif_update_links() ieee80211_link_stop() cfg80211_cac_event() cfg80211_cac_event() requires link ID to be present but it is cleared already in cfg80211_remove_link(). Ultimately, WARN_ON() is hit. Therefore, clear the link ID from the bitmap only after completing the link clean-up. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20241121-mlo_dfs_fix-v2-1-92c3bf7ab551@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beaconHaoyu Li1-1/+1
With the new __counted_by annocation in cfg80211_mbssid_elems, the "cnt" struct member must be set before accessing the "elem" array. Failing to do so will trigger a runtime warning when enabling CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE. Fixes: c14679d7005a ("wifi: cfg80211: Annotate struct cfg80211_mbssid_elems with __counted_by") Signed-off-by: Haoyu Li <lihaoyu499@gmail.com> Link: https://patch.msgid.link/20241123172500.311853-1-lihaoyu499@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-14Merge tag 'wireless-next-2024-11-13' of ↵Jakub Kicinski1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.13 Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip * tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits) Revert "wifi: iwlegacy: do not skip frames with bad FCS" wifi: mac80211: pass MBSSID config by reference wifi: mac80211: Support EHT 1024 aggregation size in TX net: rfkill: gpio: Add check for clk_enable() wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: Switch back to struct platform_driver::remove() wifi: ipw2x00: libipw_rx_any(): fix bad alignment wifi: brcmfmac: release 'root' node in all execution paths wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA wifi: iwlwifi: bump minimum API version in BZ/SC to 92 wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h wifi: iwlwifi: be less noisy if the NIC is dead in S3 wifi: iwlwifi: mvm: tell iwlmei when we finished suspending wifi: iwlwifi: allow fast resume on ax200 wifi: iwlwifi: mvm: support new initiator and responder command version wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency wifi: iwlwifi: mvm: MLO scan upon channel condition degradation wifi: iwlwifi: mvm: support new versions of the wowlan APIs wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif() ... ==================== Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-12wifi: mac80211: pass MBSSID config by referenceJohannes Berg1-6/+6
It's inefficient and confusing to pass the MBSSID config by value, requiring the whole struct to be copied. Pass it by reference instead. Link: https://patch.msgid.link/20241108092227.48fbd8a00112.I64abc1296a7557aadf798d88db931024486ab3b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-9/+16
Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-23wifi: mac80211: add flag to opt out of virtual monitor supportFelix Fietkau1-16/+28
This is useful for multi-radio devices that are capable of monitoring on multiple channels simultanenously. When this flag is set, each monitor interface is passed to the driver individually and can have a configured channel. The vif mac address for non-active monitor interfaces is cleared, in order to allow the driver to tell them apart from active ones. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/3c55505ee0cf0a5f141fbcb30d1e8be8d9f40373.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: cfg80211: pass net_device to .set_monitor_channelFelix Fietkau1-0/+1
Preparation for allowing multiple monitor interfaces with different channels on a multi-radio wiphy. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/35fa652dbfebf93343f8b9a08fdef0467a2a02dc.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: allow rate_control_rate_init() for linksJohannes Berg1-2/+9
Andrei previously fixed an issue in the client where the NSS for links other than the primary/assoc/deflink isn't set. The same issue appears to exist on the AP side, because there's only a call to rate_control_rate_init() for the deflink, and not any other links. Rework the code a bit to do rate_control_rate_init() for links, even if it really doesn't work with software rate control yet, it does other things as well. Also add rate_control_rate_init_all_links() to actually do it properly when moving to ASSOC state in cfg80211. Change the explicit call to ieee80211_sta_init_nss() to instead be rate_control_rate_init() now in the client code, but also add a call to rate_control_rate_init() when a link is added in AP mode and the STA is already associated. This should fix the NSS initialization issue, and perhaps pave the way for actual software rate scaling a bit, in case anyone cares in the future, but that of course needs a lot more than just the init call. We still need to fix the rate control _update_ as well, and the sta_rc_update() driver method especially, but that will be in a different patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.c693274a908f.I0376da02e9f5a30eaa1b5d0d01371ff09506d453@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: update the right link for tx powerEmmanuel Grumbach1-35/+59
Stop looking at deflink and start using the actual link. Initialize the power settings upon link init. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.2685dab8e1ab.I1d82cbdb2dda020aee4a225bd9a134f7d82dd810@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: ieee80211_recalc_txpower receives a linkEmmanuel Grumbach1-3/+4
Handle the tx power per-link. Don't change the behavior for now. Just change the signature of the function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.705bbf953d0a.I8a429dede07bab5801f4c730a6abff7ce23b22d3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: cfg80211: disallow SMPS in AP modeJohannes Berg1-3/+0
In practice, userspace hasn't been able to set this for many years, and mac80211 has already rejected it (which is now no longer needed), so reject SMPS mode (other than "OFF" to be a bit more compatible) in AP mode. Also remove the parameter from the AP settings struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.fe1fc46484cf.I8676fb52b818a4bedeb9c25b901e1396277ffc0b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: Add support to indicate that a new interface is to be addedIlan Peer1-0/+18
Add support to indicate to the driver that an interface is about to be added so that the driver could prepare its resources early if it needs so. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.e0e8563e1c30.Ifccc96a46a347eb15752caefc9f4eff31f75ed47@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-08wifi: mac80211: do not pass a stopped vif to the driver in .get_txpowerFelix Fietkau1-1/+2
Avoid potentially crashing in the driver because of uninitialized private data Fixes: 5b3dc42b1b0d ("mac80211: add support for driver tx power reporting") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/20241002095630.22431-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-08wifi: mac80211: Convert color collision detection to wiphy workRemi Pommarel1-8/+9
Call to ieee80211_color_collision_detection_work() needs wiphy lock to be held (see lockdep assert in cfg80211_bss_color_notify()). Not locking wiphy causes the following lockdep error: WARNING: CPU: 2 PID: 42 at net/wireless/nl80211.c:19505 cfg80211_bss_color_notify+0x1a4/0x25c Modules linked in: CPU: 2 PID: 42 Comm: kworker/u8:3 Tainted: G W 6.4.0-02327-g36c6cb260481 #1048 Hardware name: Workqueue: phy1 ieee80211_color_collision_detection_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : cfg80211_bss_color_notify+0x1a4/0x25c lr : cfg80211_bss_color_notify+0x1a0/0x25c sp : ffff000002947d00 x29: ffff000002947d00 x28: ffff800008e1a000 x27: ffff000002bd4705 x26: ffff00000d034000 x25: ffff80000903cf40 x24: 0000000000000000 x23: ffff00000cb70720 x22: 0000000000800000 x21: ffff800008dfb008 x20: 000000000000008d x19: ffff00000d035fa8 x18: 0000000000000010 x17: 0000000000000001 x16: 000003564b1ce96a x15: 000d69696d057970 x14: 000000000000003b x13: 0000000000000001 x12: 0000000000040000 x11: 0000000000000001 x10: ffff80000978f9c0 x9 : ffff0000028d3174 x8 : ffff800008e30000 x7 : 0000000000000000 x6 : 0000000000000028 x5 : 000000000002f498 x4 : ffff00000d034a80 x3 : 0000000000800000 x2 : ffff800016143000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: cfg80211_bss_color_notify+0x1a4/0x25c ieee80211_color_collision_detection_work+0x20/0x118 process_one_work+0x294/0x554 worker_thread+0x70/0x440 kthread+0xf4/0xf8 ret_from_fork+0x10/0x20 irq event stamp: 77372 hardirqs last enabled at (77371): [<ffff800008a346fc>] _raw_spin_unlock_irq+0x2c/0x4c hardirqs last disabled at (77372): [<ffff800008a28754>] el1_dbg+0x20/0x48 softirqs last enabled at (77350): [<ffff8000089e120c>] batadv_send_outstanding_bcast_packet+0xb8/0x120 softirqs last disabled at (77348): [<ffff8000089e11d4>] batadv_send_outstanding_bcast_packet+0x80/0x120 The wiphy lock cannot be taken directly from color collision detection delayed work (ieee80211_color_collision_detection_work()) because this work is cancel_delayed_work_sync() under this wiphy lock causing a potential deadlock( see [0] for details). To fix that ieee80211_color_collision_detection_work() could be converted to a wiphy work and cancel_delayed_work_sync() can be simply replaced by wiphy_delayed_work_cancel() serving the same purpose under wiphy lock. This could potentially fix [1]. [0]: https://lore.kernel.org/linux-wireless/D4A40Q44OAY2.W3SIF6UEPBUN@freebox.fr/ [1]: https://lore.kernel.org/lkml/000000000000612f290618eee3e5@google.com/ Reported-by: Nicolas Escande <nescande@freebox.fr> Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://patch.msgid.link/20240924192805.13859-3-repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-08wifi: mac80211: Fix setting txpower with emulate_chanctxBen Greear1-0/+5
Propagate hw conf into the driver when txpower changes and driver is emulating channel contexts. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://patch.msgid.link/20240924011325.1509103-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211/mac80211: use proper link ID for DFSAditya Kumar Singh1-3/+3
Now that all APIs have support to handle DFS per link, use proper link ID instead of 0. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-8-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: mac80211: handle DFS per linkAditya Kumar Singh1-8/+18
In order to support DFS with MLO, handle the link ID now passed from cfg80211, adjust the code to do everything per link and call the notifications to cfg80211 correctly. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-7-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: handle DFS per linkAditya Kumar Singh1-3/+3
Currently, during starting a radar detection, no link id information is parsed and passed down. In order to support starting radar detection during Multi Link Operation, it is required to pass link id as well. Add changes to first parse and then pass link id in the start radar detection path. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. However, everything is handled at link 0 only until all API's are ready to handle it per link. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: move DFS related members to links[] in wireless_devAditya Kumar Singh1-4/+4
A few members related to DFS handling are currently under per wireless device data structure. However, in order to support DFS with MLO, there is a need to have them on a per-link manner. Hence, as a preliminary step, move members cac_started, cac_start_time and cac_time_ms to be on a per-link basis. Since currently, link ID is not known at all places, use default value of 0 for now. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: mac80211: remove label usage in ieee80211_start_radar_detection()Aditya Kumar Singh1-7/+4
After locks rework [1], ieee80211_start_radar_detection() function is no longer acquiring any lock as such explicitly. Hence, it is not unlocking anything as well. However, label "out_unlock" is still used which creates confusion. Also, now there is no need of goto label as such. Get rid of the goto logic and use direct return statements. [1]: https://lore.kernel.org/all/20230828135928.b1c6efffe9ad.I4aec875e25abc9ef0b5ad1e70b5747fd483fbd3c@changeid/ Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-3-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06Revert "wifi: mac80211: move radar detect work to sdata"Aditya Kumar Singh1-3/+3
This reverts commit ce9e660ef32e ("wifi: mac80211: move radar detect work to sdata"). To enable radar detection with MLO, it’s essential to handle it on a per-link basis. This is because when using MLO, multiple links may already be active and beaconing. In this scenario, another link should be able to initiate a radar detection. Also, if underlying links are associated with different hardware devices but grouped together for MLO, they could potentially start radar detection simultaneously. Therefore, it makes sense to manage radar detection settings separately for each link by moving them back to a per-link data structure. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-26wifi: mac80211: use monitor sdata with driver only if desiredJohannes Berg1-2/+5
In commit 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") I changed mac80211 to always have an internal monitor_sdata to have something to have the chanctx bound to. However, if the driver didn't also have the WANT_MONITOR flag this would cause mac80211 to allocate it without telling the driver (which was intentional) but also use it for later APIs to the driver without it ever having known about it which was _not_ intentional. Check through the code and only use the monitor_sdata in the relevant places (TX, MU-MIMO follow settings, TX power, and interface iteration) when the WANT_MONITOR flag is set. Cc: stable@vger.kernel.org Fixes: 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") Reported-by: ZeroBeat <ZeroBeat@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086 Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-09wifi: mac80211: extend ifcomb check functions for multi-radioFelix Fietkau1-3/+4
Add support for counting global and per-radio max/current number of channels, as well as checking radio-specific interface combinations. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/e76307f8ce562a91a74faab274ae01f6a5ba0a2e.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-28wifi: mac80211: remove key data from get_key callbackJohannes Berg1-3/+0
This is now unused in nl80211, so there's no need to set the pointer/length. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627104411.f8ac49a8cfe0.Ic01f775903f0acd10b9ba77eb39d4ed50e709173@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: refactor CSA queue block/unblockJohannes Berg1-16/+4
This code is duplicated many times, refactor it into new separate functions. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143037.1ad22f10392d.If21490c2c67aae28f3c54038363181ee920ce3d1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: mac80211: clean up 'ret' in sta_link_apply_parameters()Johannes Berg1-2/+3
There's no need to have the always-zero ret variable in the function scope, move it into the inner scope only. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605135233.eb7a24632d98.I72d7fe1da89d4b89bcfd0f5fb9057e3e69355cfe@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: mac80211: fix erroneous errors for STA changesJohannes Berg1-19/+36
When e.g. wpa_supplicant sets only the MLD "sta" authorized state, the code actually applies that change, but then returns an error to userspace anyway because there were no changes to the link station, and no link ID was given. However, it's not incorrect to not have a link ID when wanting to change only the MLD peer ("sta") state, so the code shouldn't require it. To fix this, separate the "new_link" argument out into a new three-state enum, because if modify is called on a link STA only, it should return an error if no link is given or if it doesn't exist. For modify on the MLD "sta", not having a link ID is OK, but if there is one it should be validated. This seems to not have mattered much as wpa_supplicant just prints a message and continues, and the authorized state was already set before this error return. However, in the later code powersave recalculation etc. will be skipped, so that it may result in never allowing powersave on MLO connections. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605135233.48e2b8af07e3.Ib9793c383fcba118c05100e024f4a11a1c3d0e85@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-11Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski1-51/+29
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29wifi: mac80211: pass proper link id for channel switch started notificationAditya Kumar Singh1-2/+2
Original changes[1] posted is having proper changes. However, at the same time, there was chandef puncturing changes which had a conflict with this. While applying, two errors crept in - a) Whitespace error. b) Link ID being passed to channel switch started notifier function is 0. However proper link ID is present in the function. Fix these now. [1] https://lore.kernel.org/all/20240130140918.1172387-5-quic_adisi@quicinc.com/ Fixes: 1a96bb4e8a79 ("wifi: mac80211: start and finalize channel switch on link basis") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240509032555.263933-1-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: mac80211: apply mcast rate only if interface is upJohannes Berg1-2/+3
If the interface isn't enabled, don't apply multicast rate changes immediately. Reported-by: syzbot+de87c09cc7b964ea2e23@syzkaller.appspotmail.com Link: https://msgid.link/20240515133410.d6cffe5756cc.I47b624a317e62bdb4609ff7fa79403c0c444d32d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-07-19 02:28:48 +0300