summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
AgeCommit message (Collapse)AuthorFilesLines
2024-09-06i40e: Remove setting of RX software timestampGal Pressman1-4/+0
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-30i40e: Add Energy Efficient Ethernet ability for X710 Base-T/KR/KX cardsAleksandr Loktionov1-4/+32
Add "EEE: Enabled/Disabled" to dmesg for supported X710 Base-T/KR/KX cards. According to the IEEE standard report the EEE ability and the EEE Link Partner ability. Use the kernel's 'ethtool_keee' structure and report EEE link modes. Example: dmesg | grep 'NIC Link is' ethtool --show-eee <device> Before: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None Supported EEE link modes: Not reported Advertised EEE link modes: Not reported Link partner advertised EEE link modes: Not reported After: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None, EEE: Enabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Link partner advertised EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent1-1/+1
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30i40e: Add helper to access main VEBIvan Vecera1-6/+3
Add a helper to access main VEB: i40e_pf_get_main_veb(pf) replaces 'pf->veb[pf->lan_veb]' Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-30i40e: Consolidate checks whether given VSI is mainIvan Vecera1-6/+6
In the driver code there are 3 types of checks whether given VSI is main or not: 1. vsi->type ==/!= I40E_VSI_MAIN 2. vsi ==/!= pf->vsi[pf->lan_vsi] 3. vsi->seid ==/!= pf->vsi[pf->lan_vsi]->seid All of them are equivalent and can be consolidated. Convert cases 2 and 3 to case 1. Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-30i40e: Add helper to access main VSIIvan Vecera1-4/+4
Add simple helper i40e_pf_get_main_vsi(pf) to access main VSI that replaces pattern 'pf->vsi[pf->lan_vsi]' Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-28net: intel: i40e/igc: Remove setting Autoneg in EEE capabilitiesAndrew Lunn1-6/+1
Energy Efficient Ethernet should always be negotiated with the link peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for supported, advertised or lp_advertised, since it is assumed. Additionally, ethtool(1) ignores the set bit, and no other driver sets this. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keeeHeiner Kallweit1-5/+5
This is in preparation of using the existing names for linkmode bitmaps. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit1-3/+3
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-03i40e: Avoid unnecessary use of comma operatorSimon Horman1-1/+1
Although it does not seem to have any untoward side-effects, the use of ';' to separate to assignments seems more appropriate than ','. Flagged by clang-17 -Wcomma No functional change intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-18i40e: field get conversionJesse Brandeburg1-4/+3
Refactor the i40e driver to use FIELD_GET() for mask and shift reads, which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. While making one of the conversions, an if() check was inverted to return early and avoid un-necessary indentation of the remainder of the function. In some other cases a stack variable was moved inside the block where it was used while doing cleanups/review. A couple places were changed to use le16_get_bits() instead of FIELD_GET with a le16_to_cpu combination. @get@ constant shift,mask; metavariable type T; expression a; @@ -(((T)(a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-15i40e: remove fake support of rx-frames-irqJason Xing1-3/+2
Since we never support this feature for I40E driver, we don't have to display the value when using 'ethtool -c eth0'. Before this patch applied, the rx-frames-irq is 256 which is consistent with tx-frames-irq. Apparently it could mislead users. Signed-off-by: Jason Xing <kernelxing@tencent.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231213184406.1306602-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki1-20/+18
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08net: Convert some ethtool_sprintf() to ethtool_puts()justinstitt@google.com1-4/+2
This patch converts some basic cases of ethtool_sprintf() to ethtool_puts(). The conversions are used in cases where ethtool_sprintf() was being used with just two arguments: | ethtool_sprintf(&data, buffer[i].name); or when it's used with format string: "%s" | ethtool_sprintf(&data, "%s", buffer[i].name); which both now become: | ethtool_puts(&data, buffer[i].name); Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-15i40e: Consolidate hardware capabilitiesIvan Vecera1-18/+18
Fields .caps in i40e_hw and .hw_features in i40e_pf both indicate capabilities provided by hardware. Move and merge i40e_pf.hw_features into i40e_hw.caps as this is more appropriate place for them and adjust their names to I40E_HW_CAP_... convention. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-9-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15i40e: Use DECLARE_BITMAP for flags field in i40e_hwIvan Vecera1-5/+5
Convert flags field in i40e_hw from u64 to bitmap and its usage to use bit access functions and rename the field to 'caps' as this field describes capabilities that are set once on init and read many times later. Changes: - Convert "hw_ptr->flags & FLAG" to "test_bit(FLAG, ...)" - Convert "hw_ptr->flags |= FLAG" to "set_bit(FLAG, ...)" - Convert "hw_ptr->flags &= ~FLAG" to "clear_bit(FLAG, ...)" - Rename i40e_hw.flags to i40e_hw.caps - Rename i40e_set_hw_flags() to i40e_set_hw_caps() - Adjust caps names so they are prefixed by I40E_HW_CAP_ and existing _CAPABLE suffixes are stripped Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15i40e: Use DECLARE_BITMAP for flags and hw_features fields in i40e_pfIvan Vecera1-101/+108
Convert flags and hw_features fields from i40e_pf from u32 to bitmaps and their usage to use bit access functions. Changes: - Convert "pf_ptr->(flags|hw_features) & FL" to "test_bit(FL, ...)" - Convert "pf_ptr->(flags|hw_features) |= FL" to "set_bit(FL, ...)" - Convert "pf_ptr->(flags|hw_features) &= ~FL" to "clear_bit(FL, ...)" - Rename flag field to bitno in i40e_priv_flags and adjust ethtool callbacks to work with flags bitmap - Rename flag names where '_ENABLED'->'_ENA' and '_DISABLED'->'_DIS' like in ice driver Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-7-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15i40e: Change user notification of non-SFP module in i40e_get_module_info()Andrii Staikov1-2/+2
Make the driver not produce an error message on "ethtool -m ethX" command when a non-SFP module is encountered hence there is no possibility to read the EEPROM. Make the message to appear in the debug log rather than as an error string. Change the return code to -EOPNOTSUPP and the string to make it more verbose. Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> CC: Stefan Assmann <sassmann@redhat.com> CC: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15i40e: increase max descriptors for XL710Justin Bronder1-6/+19
In Tables 8-12 and 8-22 in the X710/XXV710/XL710 datasheet, the QLEN description states that the maximum size of the descriptor queue is 8k minus 32, or 8160. Signed-off-by: Justin Bronder <jsbronder@cold-front.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19intel: fix format warningsJesse Brandeburg1-2/+4
Get ahead of the game and fix all the -Wformat=2 noted warnings in the intel drivers directory. There are one set of i40e and iavf warnings I couldn't figure out how to fix because the driver is already using vsnprintf without an explicit "const char *" format string. Tested with both gcc-12 and clang-15. I found gcc-12 runs clean after this series but clang-15 is a little worried about the vsnprintf lines. summary of warnings: drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c:148:34: warning: format string is not a string literal [-Wformat-nonliteral] drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/iavf/iavf_ethtool.c:199:34: warning: format string is not a string literal [-Wformat-nonliteral] drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/i40e/i40e_ethtool.c:208:34: warning: format string is not a string literal [-Wformat-nonliteral] drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: note: treat the string as an argument to avoid this Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231017190411.2199743-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-15i40e: Split and refactor i40e_nvm_version_str()Ivan Vecera1-2/+2
The function formats NVM version string according adapter's EETrackID value. If this value OEM specific (0xffffffff) then the reported version is with format: "<gen>.<snap>.<release>" and in other case "<nvm_maj>.<nvm_min> <eetrackid> <cvid_maj>.<cvid_bld>.<cvid_min>" These versions are reported in the subsequent patch in this series that implements devlink .info_get but separately. So split the function into separate ones, refactor it to use them and remove ugly static string buffer. Additionally convert NVM/OEM version mask macros to use GENMASK and use FIELD_GET/FIELD_PREP for them in i40e_nvm_version_str() and i40e_get_oem_version(). This makes code more readable and allows us to remove related shift macros. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-05i40e: Remove circular header dependencies and fix headersIvan Vecera1-1/+2
Similarly as for ice driver [1] there are also circular header dependencies in i40e driver: i40e.h -> i40e_virtchnl_pf.h -> i40e.h Another issue is that i40e header files does not contain their own dependencies on other header files (both private and standard) so their inclusion in .c file require to add these deps in certain order to that .c file to make it compilable. Fix both issues by removal the mentioned circular dependency, by filling i40e headers with their dependencies so they can be placed anywhere in a source code. Additionally remove bunch of includes from i40e.h super header file that are not necessary and include i40e.h only in .c files that really require it. [1] 649c87c6ff52 ("ice: remove circular header dependencies on ice.h") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-04i40e: Add rx_missed_errors for buffer exhaustionYajun Deng1-1/+2
As the comment in struct rtnl_link_stats64, rx_dropped should not include packets dropped by the device due to buffer exhaustion. They are counted in rx_missed_errors, procfs folds those two counters together. Add rx_missed_errors for buffer exhaustion, rx_missed_errors corresponds to rx_discards, rx_dropped corresponds to rx_discards_other. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-01i40e: remove i40e_statusJan Sokolowski1-1/+1
Replace uses of i40e_status to as equivalent as possible error codes. Remove enum i40e_status as it is no longer needed Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230728171336.2446156-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-10i40e: change Rx buffer size for legacy-rx to support XDP multi-bufferTirthendu Sarkar1-0/+7
Adding support for XDP multi-buffer entails adding information of all the fragments of the packet in the xdp_buff. This approach implies that underlying buffer has to provide tailroom for skb_shared_info. In the legacy-rx mode, driver can only configure up to 2k sized Rx buffers and with the current configuration of 2k sized Rx buffers there is no way to do tailroom reservation for skb_shared_info. Hence size of Rx buffers is now lowered to 2048 - sizeof(skb_shared_info). Also, driver can only chain up to 5 Rx buffers and this means max MTU supported for legacy-rx is now 8614 (5 * rx_buffer_len - ETH header with VLAN). Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: use ERR_PTR error print in i40e messagesJan Sokolowski1-20/+20
In i40e_status removal patches, i40e_status conversion to strings was removed in order to easily refactor the code to use standard errornums. This however made it more difficult for read error logs. Use %pe formatter to print error messages in human-readable format. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: use int for i40e_statusJan Sokolowski1-12/+12
To prepare for removal of i40e_status, change the variables from i40e_status to int. This eases the transition when values are changed to return standard int error codes over enum i40e_status. As such changes often also change variable orders, a cleanup is also applied here to make variables conform to RCT and some lines are also reformatted where applicable. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: Remove string printing for i40e_statusJan Sokolowski1-21/+20
Remove the i40e_stat_str() function which prints the string representation of the i40e_status error code. With upcoming changes moving away from i40e_status, there will be no need for this function Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-10/+2
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-05i40e: Disallow ip4 and ip6 l4_4_bytesPrzemyslaw Patynowski1-10/+2
Return -EOPNOTSUPP, when user requests l4_4_bytes for raw IP4 or IP6 flow director filters. Flow director does not support filtering on l4 bytes for PCTYPEs used by IP4 and IP6 filters. Without this patch, user could create filters with l4_4_bytes fields, which did not do any filtering on L4, but only on L3 fields. Fixes: 36777d9fa24c ("i40e: check current configured input set when adding ntuple filters") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02i40e: Add appropriate error message logged for incorrect duplex settingAlicja Kowalska1-1/+3
Nothing logged in dmesg for attempting to set incorrect duplex. Add appropriate error message logged for incorrect duplex setting. Signed-off-by: Alicja Kowalska <alicjax.kowalska@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-10-29net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner1-4/+4
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26i40e: Fix flow-type by setting GL_HASH_INSET registersSlawomir Laba1-33/+38
Fix setting bits for specific flow_type for GLQF_HASH_INSET register. In previous version all of the bits were set only in hena register, while in inset only one bit was set. In order for this working correctly on all types of cards these bits needs to be set correctly for both hena and inset registers. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26i40e: Fix ethtool rx-flow-hash setting for X722Slawomir Laba1-8/+23
When enabling flow type for RSS hash via ethtool: ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d the driver would fail to setup this setting on X722 device since it was using the mask on the register dedicated for X710 devices. Apply a different mask on the register when setting the RSS hash for the X722 device. When displaying the flow types enabled via ethtool: ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6 the driver would print wrong values for X722 device. Fix this issue by testing masks for X722 device in i40e_get_rss_hash_opts function. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-14i40e: Fix DMA mappings leakJan Sokolowski1-3/+0
During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-01net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang1-3/+3
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24i40e: Fix incorrect address type for IPv6 flow rulesSylwester Dziedziuch1-1/+1
It was not possible to create 1-tuple flow director rule for IPv6 flow type. It was caused by incorrectly checking for source IP address when validating user provided destination IP address. Fix this by changing ip6src to correct ip6dst address in destination IP address validation for IPv6 flow type. Fixes: efca91e89b67 ("i40e: Add flow director support for IPv6") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-22i40e: Refactor tc mqprio checksPrzemyslaw Patynowski1-1/+1
Refactor bitwise checks for whether TC MQPRIO is enabled into one single method for improved readability. Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30intel: remove unused macrosJesse Brandeburg1-2/+0
As found by the compile option -Wunused-macros, remove these macros that are never used by the code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21i40e: Add support for ethtool -s <interface> speed <speed in Mb>Mateusz Palczewski1-0/+90
Add ability to change speed through ethtool -s <interface> speed <speed in Mb> Driver advertises all link modes that support requested speed. Autoneg must be set off e.g.: ethtool -s <interface> autoneg off speed <speed in Mb>. Add helper function that translate speed in Mb to enum i40e_aq_link_speed and compare it to supported speeds from given ethtool_link_ksettings. Add in i40e_set_link_ksettings hold for requested speed and set copy_ks.base.speed to safe_ks.base.speed to be sure that user is not changing unsupported setting. In i40e_speed_to_link_speed compare requested speed with supported speeds. Set speed to requested speed. Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+17
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09i40e: Fix call trace in setup_tx_descriptorsAleksandr Loktionov1-8/+17
After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add netif_info("testing failed") into unhappy path of i40e_diag_test() Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled") Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07i40e: Add VF VLAN pruningMateusz Palczewski1-0/+9
VFs by default are able to see all tagged traffic regardless of trust and VLAN filters configured. Add new private flag vf-vlan-pruning that allows changing of default VF behavior for tagged traffic. When the flag is turned on untrusted VF will only be able to receive untagged traffic or traffic with VLAN tags it has created interfaces for The flag is off by default and can only be changed if there are no VFs spawned on the PF. This flag will only be effective when no PVID is set on VF and VF is not trusted. Add new function that computes the correct VLAN ID for VF VLAN filters based on trust, PVID, vf-vlan-prune-disable flag and current VLAN ID. Testing Hints: Test 1: vf-vlan-pruning == off ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Use scapy to send any VLAN tagged traffic and make sure the VF receives all VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). Test 2: vf-vlan-pruning == on ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning on 2. Use scapy to send any VLAN tagged traffic and make sure the VF does not receive any VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). 3. Add a VLAN filter on the VF netdev > ip link add link eth0v0 name vlan10 type vlan id 10 4. Bring the VLAN netdev up > ip link set vlan10 up 4. Use scapy to send traffic with VLAN 10, VLAN 11 (anything not VLAN 10), and untagged traffic. Make sure the VF only receives VLAN 10 and untagged traffic when the link partner is sending. Test 3: vf-vlan-pruning == off && VF is in a port VLAN ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Create a VF > echo 1 > sriov_numvfs 3. Put the VF in a port VLAN > ip link set eth0 vf 0 vlan 10 4. Use scapy to send traffic with VLAN 10 and VLAN 11 (anything not VLAN 10) and make sure the VF only receives untagged traffic when the link partner is sending VLAN 10 tagged traffic as the VLAN tag is expected to be stripped by HW for port VLANs and not visible to the VF. Test 4: Change vf-vlan-pruning while VFs are created ============================== echo 0 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning off echo 1 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning on (expect failure) Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-12i40e: Add vsi.tx_restart to i40e ethtool statsNabil S. Alramli1-0/+1
Add vsi.tx_restart to the i40e driver ethtool statistics Signed-off-by: Nabil S. Alramli <dev@nalramli.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-12i40e: Add tx_stopped statJoe Damato1-0/+1
Track TX queue stop events and export the new stat with ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08i40e: Add a stat for tracking busy rx pagesJoe Damato1-0/+1
In some cases, pages cannot be reused by i40e because the page is busy. Add a counter for this event. Busy page count is accessible via ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08i40e: Add a stat for tracking pages waivedJoe Damato1-0/+1
In some cases, pages can not be reused because they are not associated with the correct NUMA zone. Knowing how often pages are waived helps users to understand the interaction between the driver's memory usage and their system. Pass rx_stats through to i40e_can_reuse_rx_page to allow tracking when pages are waived. The page waive count is accessible via ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08i40e: Add a stat tracking new RX page allocationsJoe Damato1-0/+1
Add a counter for new page allocations in the i40e RX path. This stat is accessible with ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08i40e: Aggregate and export RX page reuse statJoe Damato1-0/+1
rx page reuse was already being tracked by the i40e driver per RX ring. Aggregate the counts and make them accessible via ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-2/+6
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>