diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/88pm860x.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/ab8500.h | 34 | ||||
| -rw-r--r-- | include/linux/mfd/abx500.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/core.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/max8998-private.h | 175 | ||||
| -rw-r--r-- | include/linux/mfd/max8998.h | 93 | ||||
| -rw-r--r-- | include/linux/mfd/mc13783-private.h | 220 | ||||
| -rw-r--r-- | include/linux/mfd/mc13783.h | 239 | ||||
| -rw-r--r-- | include/linux/mfd/mc13xxx.h | 154 | ||||
| -rw-r--r-- | include/linux/mfd/pcf50633/core.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/sh_mobile_sdhi.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/stmpe.h | 207 | ||||
| -rw-r--r-- | include/linux/mfd/tc35892.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/tmio.h | 6 | ||||
| -rw-r--r-- | include/linux/mfd/tps6586x.h | 78 | ||||
| -rw-r--r-- | include/linux/mfd/wm831x/core.h | 12 | ||||
| -rw-r--r-- | include/linux/mfd/wm8350/audio.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/wm8994/gpio.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/wm8994/pdata.h | 2 |
19 files changed, 878 insertions, 371 deletions
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index bfd23bef7363..4db1fbd8969e 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -138,7 +138,7 @@ enum { PM8607_ID_RG_MAX, }; -#define PM8607_VERSION (0x40) /* 8607 chip ID */ +/* 8607 chip ID is 0x40 or 0x50 */ #define PM8607_VERSION_MASK (0xF0) /* 8607 chip ID mask */ /* Interrupt Registers */ diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h index b63ff3ba3351..d63b6050b183 100644 --- a/include/linux/mfd/ab8500.h +++ b/include/linux/mfd/ab8500.h @@ -10,6 +10,29 @@ #include <linux/device.h> /* + * AB8500 bank addresses + */ +#define AB8500_SYS_CTRL1_BLOCK 0x1 +#define AB8500_SYS_CTRL2_BLOCK 0x2 +#define AB8500_REGU_CTRL1 0x3 +#define AB8500_REGU_CTRL2 0x4 +#define AB8500_USB 0x5 +#define AB8500_TVOUT 0x6 +#define AB8500_DBI 0x7 +#define AB8500_ECI_AV_ACC 0x8 +#define AB8500_RESERVED 0x9 +#define AB8500_GPADC 0xA +#define AB8500_CHARGER 0xB +#define AB8500_GAS_GAUGE 0xC +#define AB8500_AUDIO 0xD +#define AB8500_INTERRUPT 0xE +#define AB8500_RTC 0xF +#define AB8500_MISC 0x10 +#define AB8500_DEBUG 0x12 +#define AB8500_PROD_TEST 0x13 +#define AB8500_OTP_EMUL 0x15 + +/* * Interrupts */ @@ -76,6 +99,8 @@ #define AB8500_NR_IRQS 104 #define AB8500_NUM_IRQ_REGS 13 +#define AB8500_NUM_REGULATORS 15 + /** * struct ab8500 - ab8500 internal structure * @dev: parent device @@ -97,6 +122,7 @@ struct ab8500 { int revision; int irq_base; int irq; + u8 chip_id; int (*write) (struct ab8500 *a8500, u16 addr, u8 data); int (*read) (struct ab8500 *a8500, u16 addr); @@ -108,20 +134,20 @@ struct ab8500 { u8 oldmask[AB8500_NUM_IRQ_REGS]; }; +struct regulator_init_data; + /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used * @init: board-specific initialization after detection of ab8500 + * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; void (*init) (struct ab8500 *); + struct regulator_init_data *regulator[AB8500_NUM_REGULATORS]; }; -extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data); -extern int ab8500_read(struct ab8500 *a8500, u16 addr); -extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data); - extern int __devinit ab8500_init(struct ab8500 *ab8500); extern int __devexit ab8500_exit(struct ab8500 *ab8500); diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 390726fcbcb1..67bd6f7ecf32 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -6,8 +6,7 @@ * * ABX500 core access functions. * The abx500 interface is used for the Analog Baseband chip - * ab3100, ab3550, ab5500 and possibly comming. It is not used for - * ab4500 and ab8500 since they are another family of chip. + * ab3100, ab3550, ab5500, and ab8500. * * Author: Mattias Wallin <mattias.wallin@stericsson.com> * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> @@ -230,4 +229,5 @@ struct abx500_ops { }; int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops); +void abx500_remove_ops(struct device *dev); #endif diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 11d740b8831d..cb93d80aa642 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -44,6 +44,9 @@ struct mfd_cell { */ int num_resources; const struct resource *resources; + + /* don't check for resource conflicts */ + bool ignore_resource_conflicts; }; extern int mfd_add_devices(struct device *parent, int id, diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h new file mode 100644 index 000000000000..7363dea6bbcd --- /dev/null +++ b/include/linux/mfd/max8998-private.h @@ -0,0 +1,175 @@ +/* + * max8998.h - Voltage regulator driver for the Maxim 8998 + * + * Copyright (C) 2009-2010 Samsung Electrnoics + * Kyungmin Park <kyungmin.park@samsung.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_MFD_MAX8998_PRIV_H +#define __LINUX_MFD_MAX8998_PRIV_H + +#define MAX8998_NUM_IRQ_REGS 4 + +/* MAX 8998 registers */ +enum { + MAX8998_REG_IRQ1, + MAX8998_REG_IRQ2, + MAX8998_REG_IRQ3, + MAX8998_REG_IRQ4, + MAX8998_REG_IRQM1, + MAX8998_REG_IRQM2, + MAX8998_REG_IRQM3, + MAX8998_REG_IRQM4, + MAX8998_REG_STATUS1, + MAX8998_REG_STATUS2, + MAX8998_REG_STATUSM1, + MAX8998_REG_STATUSM2, + MAX8998_REG_CHGR1, + MAX8998_REG_CHGR2, + MAX8998_REG_LDO_ACTIVE_DISCHARGE1, + MAX8998_REG_LDO_ACTIVE_DISCHARGE2, + MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, + MAX8998_REG_ONOFF1, + MAX8998_REG_ONOFF2, + MAX8998_REG_ONOFF3, + MAX8998_REG_ONOFF4, + MAX8998_REG_BUCK1_VOLTAGE1, + MAX8998_REG_BUCK1_VOLTAGE2, + MAX8998_REG_BUCK1_VOLTAGE3, + MAX8998_REG_BUCK1_VOLTAGE4, + MAX8998_REG_BUCK2_VOLTAGE1, + MAX8998_REG_BUCK2_VOLTAGE2, + MAX8998_REG_BUCK3, + MAX8998_REG_BUCK4, + MAX8998_REG_LDO2_LDO3, + MAX8998_REG_LDO4, + MAX8998_REG_LDO5, + MAX8998_REG_LDO6, + MAX8998_REG_LDO7, + MAX8998_REG_LDO8_LDO9, + MAX8998_REG_LDO10_LDO11, + MAX8998_REG_LDO12, + MAX8998_REG_LDO13, + MAX8998_REG_LDO14, + MAX8998_REG_LDO15, + MAX8998_REG_LDO16, + MAX8998_REG_LDO17, + MAX8998_REG_BKCHR, + MAX8998_REG_LBCNFG1, + MAX8998_REG_LBCNFG2, +}; + +/* IRQ definitions */ +enum { + MAX8998_IRQ_DCINF, + MAX8998_IRQ_DCINR, + MAX8998_IRQ_JIGF, + MAX8998_IRQ_JIGR, + MAX8998_IRQ_PWRONF, + MAX8998_IRQ_PWRONR, + + MAX8998_IRQ_WTSREVNT, + MAX8998_IRQ_SMPLEVNT, + MAX8998_IRQ_ALARM1, + MAX8998_IRQ_ALARM0, + + MAX8998_IRQ_ONKEY1S, + MAX8998_IRQ_TOPOFFR, + MAX8998_IRQ_DCINOVPR, + MAX8998_IRQ_CHGRSTF, + MAX8998_IRQ_DONER, + MAX8998_IRQ_CHGFAULT, + + MAX8998_IRQ_LOBAT1, + MAX8998_IRQ_LOBAT2, + + MAX8998_IRQ_NR, +}; + +/* MAX8998 various variants */ +enum { + TYPE_MAX8998 = 0, /* Default */ + TYPE_LP3974, /* National version of MAX8998 */ + TYPE_LP3979, /* Added AVS */ +}; + +#define MAX8998_IRQ_DCINF_MASK (1 << 2) +#define MAX8998_IRQ_DCINR_MASK (1 << 3) +#define MAX8998_IRQ_JIGF_MASK (1 << 4) +#define MAX8998_IRQ_JIGR_MASK (1 << 5) +#define MAX8998_IRQ_PWRONF_MASK (1 << 6) +#define MAX8998_IRQ_PWRONR_MASK (1 << 7) + +#define MAX8998_IRQ_WTSREVNT_MASK (1 << 0) +#define MAX8998_IRQ_SMPLEVNT_MASK (1 << 1) +#define MAX8998_IRQ_ALARM1_MASK (1 << 2) +#define MAX8998_IRQ_ALARM0_MASK (1 << 3) + +#define MAX8998_IRQ_ONKEY1S_MASK (1 << 0) +#define MAX8998_IRQ_TOPOFFR_MASK (1 << 2) +#define MAX8998_IRQ_DCINOVPR_MASK (1 << 3) +#define MAX8998_IRQ_CHGRSTF_MASK (1 << 4) +#define MAX8998_IRQ_DONER_MASK (1 << 5) +#define MAX8998_IRQ_CHGFAULT_MASK (1 << 7) + +#define MAX8998_IRQ_LOBAT1_MASK (1 << 0) +#define MAX8998_IRQ_LOBAT2_MASK (1 << 1) + +#define MAX8998_ENRAMP (1 << 4) + +/** + * struct max8998_dev - max8998 master device for sub-drivers + * @dev: master device of the chip (can be used to access platform data) + * @i2c: i2c client private data for regulator + * @rtc: i2c client private data for rtc + * @iolock: mutex for serializing io access + * @irqlock: mutex for buslock + * @irq_base: base IRQ number for max8998, required for IRQs + * @irq: generic IRQ number for max8998 + * @ono: power onoff IRQ number for max8998 + * @irq_masks_cur: currently active value + * @irq_masks_cache: cached hardware value + * @type: indicate which max8998 "variant" is used + */ +struct max8998_dev { + struct device *dev; + struct i2c_client *i2c; + struct i2c_client *rtc; + struct mutex iolock; + struct mutex irqlock; + + int irq_base; + int irq; + int ono; + u8 irq_masks_cur[MAX8998_NUM_IRQ_REGS]; + u8 irq_masks_cache[MAX8998_NUM_IRQ_REGS]; + int type; +}; + +int max8998_irq_init(struct max8998_dev *max8998); +void max8998_irq_exit(struct max8998_dev *max8998); + +extern int max8998_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest); +extern int max8998_bulk_read(struct i2c_client *i2c, u8 reg, int count, + u8 *buf); +extern int max8998_write_reg(struct i2c_client *i2c, u8 reg, u8 value); +extern int max8998_bulk_write(struct i2c_client *i2c, u8 reg, int count, + u8 *buf); +extern int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask); + +#endif /* __LINUX_MFD_MAX8998_PRIV_H */ diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h new file mode 100644 index 000000000000..f8c9f884aff2 --- /dev/null +++ b/include/linux/mfd/max8998.h @@ -0,0 +1,93 @@ +/* + * max8998.h - Voltage regulator driver for the Maxim 8998 + * + * Copyright (C) 2009-2010 Samsung Electrnoics + * Kyungmin Park <kyungmin.park@samsung.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_MFD_MAX8998_H +#define __LINUX_MFD_MAX8998_H + +#include <linux/regulator/machine.h> + +/* MAX 8998 regulator ids */ +enum { + MAX8998_LDO2 = 2, + MAX8998_LDO3, + MAX8998_LDO4, + MAX8998_LDO5, + MAX8998_LDO6, + MAX8998_LDO7, + MAX8998_LDO8, + MAX8998_LDO9, + MAX8998_LDO10, + MAX8998_LDO11, + MAX8998_LDO12, + MAX8998_LDO13, + MAX8998_LDO14, + MAX8998_LDO15, + MAX8998_LDO16, + MAX8998_LDO17, + MAX8998_BUCK1, + MAX8998_BUCK2, + MAX8998_BUCK3, + MAX8998_BUCK4, + MAX8998_EN32KHZ_AP, + MAX8998_EN32KHZ_CP, + MAX8998_ENVICHG, + MAX8998_ESAFEOUT1, + MAX8998_ESAFEOUT2, +}; + +/** + * max8998_regulator_data - regulator data + * @id: regulator id + * @initdata: regulator init data (contraints, supplies, ...) + */ +struct max8998_regulator_data { + int id; + struct regulator_init_data *initdata; +}; + +/** + * struct max8998_board - packages regulator init data + * @regulators: array of defined regulators + * @num_regulators: number of regultors used + * @irq_base: base IRQ number for max8998, required for IRQs + * @ono: power onoff IRQ number for max8998 + * @buck1_max_voltage1: BUCK1 maximum alowed voltage register 1 + * @buck1_max_voltage2: BUCK1 maximum alowed voltage register 2 + * @buck2_max_voltage: BUCK2 maximum alowed voltage + * @buck1_set1: BUCK1 gpio pin 1 to set output voltage + * @buck1_set2: BUCK1 gpio pin 2 to set output voltage + * @buck2_set3: BUCK2 gpio pin to set output voltage + */ +struct max8998_platform_data { + struct max8998_regulator_data *regulators; + int num_regulators; + int irq_base; + int ono; + int buck1_max_voltage1; + int buck1_max_voltage2; + int buck2_max_voltage; + int buck1_set1; + int buck1_set2; + int buck2_set3; +}; + +#endif /* __LINUX_MFD_MAX8998_H */ diff --git a/include/linux/mfd/mc13783-private.h b/include/linux/mfd/mc13783-private.h deleted file mode 100644 index 95cf9360553f..000000000000 --- a/include/linux/mfd/mc13783-private.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * Initial development of this code was funded by - * Phytec Messtechnik GmbH, http://www.phytec.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __LINUX_MFD_MC13783_PRIV_H -#define __LINUX_MFD_MC13783_PRIV_H - -#include <linux/platform_device.h> -#include <linux/mfd/mc13783.h> -#include <linux/mutex.h> -#include <linux/interrupt.h> - -struct mc13783 { - struct spi_device *spidev; - struct mutex lock; - int irq; - int flags; - - irq_handler_t irqhandler[MC13783_NUM_IRQ]; - void *irqdata[MC13783_NUM_IRQ]; - - /* XXX these should go as platformdata to the regulator subdevice */ - struct mc13783_regulator_init_data *regulators; - int num_regulators; -}; - -#define MC13783_REG_INTERRUPT_STATUS_0 0 -#define MC13783_REG_INTERRUPT_MASK_0 1 -#define MC13783_REG_INTERRUPT_SENSE_0 2 -#define MC13783_REG_INTERRUPT_STATUS_1 3 -#define MC13783_REG_INTERRUPT_MASK_1 4 -#define MC13783_REG_INTERRUPT_SENSE_1 5 -#define MC13783_REG_POWER_UP_MODE_SENSE 6 -#define MC13783_REG_REVISION 7 -#define MC13783_REG_SEMAPHORE 8 -#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9 -#define MC13783_REG_ARBITRATION_SWITCHERS 10 -#define MC13783_REG_ARBITRATION_REGULATORS_0 11 -#define MC13783_REG_ARBITRATION_REGULATORS_1 12 -#define MC13783_REG_POWER_CONTROL_0 13 -#define MC13783_REG_POWER_CONTROL_1 14 -#define MC13783_REG_POWER_CONTROL_2 15 -#define MC13783_REG_REGEN_ASSIGNMENT 16 -#define MC13783_REG_CONTROL_SPARE 17 -#define MC13783_REG_MEMORY_A 18 -#define MC13783_REG_MEMORY_B 19 -#define MC13783_REG_RTC_TIME 20 -#define MC13783_REG_RTC_ALARM 21 -#define MC13783_REG_RTC_DAY 22 -#define MC13783_REG_RTC_DAY_ALARM 23 -#define MC13783_REG_SWITCHERS_0 24 -#define MC13783_REG_SWITCHERS_1 25 -#define MC13783_REG_SWITCHERS_2 26 -#define MC13783_REG_SWITCHERS_3 27 -#define MC13783_REG_SWITCHERS_4 28 -#define MC13783_REG_SWITCHERS_5 29 -#define MC13783_REG_REGULATOR_SETTING_0 30 -#define MC13783_REG_REGULATOR_SETTING_1 31 -#define MC13783_REG_REGULATOR_MODE_0 32 -#define MC13783_REG_REGULATOR_MODE_1 33 -#define MC13783_REG_POWER_MISCELLANEOUS 34 -#define MC13783_REG_POWER_SPARE 35 -#define MC13783_REG_AUDIO_RX_0 36 -#define MC13783_REG_AUDIO_RX_1 37 -#define MC13783_REG_AUDIO_TX 38 -#define MC13783_REG_AUDIO_SSI_NETWORK 39 -#define MC13783_REG_AUDIO_CODEC 40 -#define MC13783_REG_AUDIO_STEREO_DAC 41 -#define MC13783_REG_AUDIO_SPARE 42 -#define MC13783_REG_ADC_0 43 -#define MC13783_REG_ADC_1 44 -#define MC13783_REG_ADC_2 45 -#define MC13783_REG_ADC_3 46 -#define MC13783_REG_ADC_4 47 -#define MC13783_REG_CHARGER 48 -#define MC13783_REG_USB 49 -#define MC13783_REG_CHARGE_USB_SPARE 50 -#define MC13783_REG_LED_CONTROL_0 51 -#define MC13783_REG_LED_CONTROL_1 52 -#define MC13783_REG_LED_CONTROL_2 53 -#define MC13783_REG_LED_CONTROL_3 54 -#define MC13783_REG_LED_CONTROL_4 55 -#define MC13783_REG_LED_CONTROL_5 56 -#define MC13783_REG_SPARE 57 -#define MC13783_REG_TRIM_0 58 -#define MC13783_REG_TRIM_1 59 -#define MC13783_REG_TEST_0 60 -#define MC13783_REG_TEST_1 61 -#define MC13783_REG_TEST_2 62 -#define MC13783_REG_TEST_3 63 -#define MC13783_REG_NB 64 - -/* - * Reg Regulator Mode 0 - */ -#define MC13783_REGCTRL_VAUDIO_EN (1 << 0) -#define MC13783_REGCTRL_VAUDIO_STBY (1 << 1) -#define MC13783_REGCTRL_VAUDIO_MODE (1 << 2) -#define MC13783_REGCTRL_VIOHI_EN (1 << 3) -#define MC13783_REGCTRL_VIOHI_STBY (1 << 4) -#define MC13783_REGCTRL_VIOHI_MODE (1 << 5) -#define MC13783_REGCTRL_VIOLO_EN (1 << 6) -#define MC13783_REGCTRL_VIOLO_STBY (1 << 7) -#define MC13783_REGCTRL_VIOLO_MODE (1 << 8) -#define MC13783_REGCTRL_VDIG_EN (1 << 9) -#define MC13783_REGCTRL_VDIG_STBY (1 << 10) -#define MC13783_REGCTRL_VDIG_MODE (1 << 11) -#define MC13783_REGCTRL_VGEN_EN (1 << 12) -#define MC13783_REGCTRL_VGEN_STBY (1 << 13) -#define MC13783_REGCTRL_VGEN_MODE (1 << 14) -#define MC13783_REGCTRL_VRFDIG_EN (1 << 15) -#define MC13783_REGCTRL_VRFDIG_STBY (1 << 16) -#define MC13783_REGCTRL_VRFDIG_MODE (1 << 17) -#define MC13783_REGCTRL_VRFREF_EN (1 << 18) -#define MC13783_REGCTRL_VRFREF_STBY (1 << 19) -#define MC13783_REGCTRL_VRFREF_MODE (1 << 20) -#define MC13783_REGCTRL_VRFCP_EN (1 << 21) -#define MC13783_REGCTRL_VRFCP_STBY (1 << 22) -#define MC13783_REGCTRL_VRFCP_MODE (1 << 23) - -/* - * Reg Regulator Mode 1 - */ -#define MC13783_REGCTRL_VSIM_EN (1 << 0) -#define MC13783_REGCTRL_VSIM_STBY (1 << 1) -#define MC13783_REGCTRL_VSIM_MODE (1 << 2) -#define MC13783_REGCTRL_VESIM_EN (1 << 3) -#define MC13783_REGCTRL_VESIM_STBY (1 << 4) -#define MC13783_REGCTRL_VESIM_MODE (1 << 5) -#define MC13783_REGCTRL_VCAM_EN (1 << 6) -#define MC13783_REGCTRL_VCAM_STBY (1 << 7) -#define MC13783_REGCTRL_VCAM_MODE (1 << 8) -#define MC13783_REGCTRL_VRFBG_EN (1 << 9) -#define MC13783_REGCTRL_VRFBG_STBY (1 << 10) -#define MC13783_REGCTRL_VVIB_EN (1 << 11) -#define MC13783_REGCTRL_VRF1_EN (1 << 12) -#define MC13783_REGCTRL_VRF1_STBY (1 << 13) -#define MC13783_REGCTRL_VRF1_MODE (1 << 14) -#define MC13783_REGCTRL_VRF2_EN (1 << 15) -#define MC13783_REGCTRL_VRF2_STBY (1 << 16) -#define MC13783_REGCTRL_VRF2_MODE (1 << 17) -#define MC13783_REGCTRL_VMMC1_EN (1 << 18) -#define MC13783_REGCTRL_VMMC1_STBY (1 << 19) -#define MC13783_REGCTRL_VMMC1_MODE (1 << 20) -#define MC13783_REGCTRL_VMMC2_EN (1 << 21) -#define MC13783_REGCTRL_VMMC2_STBY (1 << 22) -#define MC13783_REGCTRL_VMMC2_MODE (1 << 23) - -/* - * Reg Regulator Misc. - */ -#define MC13783_REGCTRL_GPO1_EN (1 << 6) -#define MC13783_REGCTRL_GPO2_EN (1 << 8) -#define MC13783_REGCTRL_GPO3_EN (1 << 10) -#define MC13783_REGCTRL_GPO4_EN (1 << 12) -#define MC13783_REGCTRL_VIBPINCTRL (1 << 14) - -/* - * Reg Switcher 4 - */ -#define MC13783_SWCTRL_SW1A_MODE (1 << 0) -#define MC13783_SWCTRL_SW1A_STBY_MODE (1 << 2) -#define MC13783_SWCTRL_SW1A_DVS_SPEED (1 << 6) -#define MC13783_SWCTRL_SW1A_PANIC_MODE (1 << 8) -#define MC13783_SWCTRL_SW1A_SOFTSTART (1 << 9) -#define MC13783_SWCTRL_SW1B_MODE (1 << 10) -#define MC13783_SWCTRL_SW1B_STBY_MODE (1 << 12) -#define MC13783_SWCTRL_SW1B_DVS_SPEED (1 << 14) -#define MC13783_SWCTRL_SW1B_PANIC_MODE (1 << 16) -#define MC13783_SWCTRL_SW1B_SOFTSTART (1 << 17) -#define MC13783_SWCTRL_PLL_EN (1 << 18) -#define MC13783_SWCTRL_PLL_FACTOR (1 << 19) - -/* - * Reg Switcher 5 - */ -#define MC13783_SWCTRL_SW2A_MODE (1 << 0) -#define MC13783_SWCTRL_SW2A_STBY_MODE (1 << 2) -#define MC13783_SWCTRL_SW2A_DVS_SPEED (1 << 6) -#define MC13783_SWCTRL_SW2A_PANIC_MODE (1 << 8) -#define MC13783_SWCTRL_SW2A_SOFTSTART (1 << 9) -#define MC13783_SWCTRL_SW2B_MODE (1 << 10) -#define MC13783_SWCTRL_SW2B_STBY_MODE (1 << 12) -#define MC13783_SWCTRL_SW2B_DVS_SPEED (1 << 14) -#define MC13783_SWCTRL_SW2B_PANIC_MODE (1 << 16) -#define MC13783_SWCTRL_SW2B_SOFTSTART (1 << 17) -#define MC13783_SWSET_SW3 (1 << 18) -#define MC13783_SWCTRL_SW3_EN (1 << 20) -#define MC13783_SWCTRL_SW3_STBY (1 << 21) -#define MC13783_SWCTRL_SW3_MODE (1 << 22) - -static inline int mc13783_set_bits(struct mc13783 *mc13783, unsigned int offset, - u32 mask, u32 val) -{ - int ret; - mc13783_lock(mc13783); - ret = mc13783_reg_rmw(mc13783, offset, mask, val); - mc13783_unlock(mc13783); - - return ret; -} - -#endif /* __LINUX_MFD_MC13783_PRIV_H */ diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h index 4a894f688549..b4c741e352c2 100644 --- a/include/linux/mfd/mc13783.h +++ b/include/linux/mfd/mc13783.h @@ -1,5 +1,5 @@ /* - * Copyright 2009 Pengutronix + * Copyright 2009-2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> * * This program is free software; you can redistribute it and/or modify it under @@ -9,46 +9,83 @@ #ifndef __LINUX_MFD_MC13783_H #define __LINUX_MFD_MC13783_H -#include <linux/interrupt.h> +#include <linux/mfd/mc13xxx.h> struct mc13783; -void mc13783_lock(struct mc13783 *mc13783); -void mc13783_unlock(struct mc13783 *mc13783); +struct mc13xxx *mc13783_to_mc13xxx(struct mc13783 *mc13783); -int mc13783_reg_read(struct mc13783 *mc13783, unsigned int offset, u32 *val); -int mc13783_reg_write(struct mc13783 *mc13783, unsigned int offset, u32 val); -int mc13783_reg_rmw(struct mc13783 *mc13783, unsigned int offset, - u32 mask, u32 val); +static inline void mc13783_lock(struct mc13783 *mc13783) +{ + mc13xxx_lock(mc13783_to_mc13xxx(mc13783)); +} + +static inline void mc13783_unlock(struct mc13783 *mc13783) +{ + mc13xxx_unlock(mc13783_to_mc13xxx(mc13783)); +} + +static inline int mc13783_reg_read(struct mc13783 *mc13783, + unsigned int offset, u32 *val) +{ + return mc13xxx_reg_read(mc13783_to_mc13xxx(mc13783), offset, val); +} -int mc13783_irq_request(struct mc13783 *mc13783, int irq, - irq_handler_t handler, const char *name, void *dev); -int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq, - irq_handler_t handler, const char *name, void *dev); -int mc13783_irq_free(struct mc13783 *mc13783, int irq, void *dev); +static inline int mc13783_reg_write(struct mc13783 *mc13783, + unsigned int offset, u32 val) +{ + return mc13xxx_reg_write(mc13783_to_mc13xxx(mc13783), offset, val); +} -int mc13783_irq_mask(struct mc13783 *mc13783, int irq); -int mc13783_irq_unmask(struct mc13783 *mc13783, int irq); -int mc13783_irq_status(struct mc13783 *mc13783, int irq, - int *enabled, int *pending); -int mc13783_irq_ack(struct mc13783 *mc13783, int irq); +static inline int mc13783_reg_rmw(struct mc13783 *mc13783, + unsigned int offset, u32 mask, u32 val) +{ + return mc13xxx_reg_rmw(mc13783_to_mc13xxx(mc13783), offset, mask, val); +} -static inline int mc13783_mask(struct mc13783 *mc13783, int irq) __deprecated; -static inline int mc13783_mask(struct mc13783 *mc13783, int irq) +static inline int mc13783_get_flags(struct mc13783 *mc13783) { - return mc13783_irq_mask(mc13783, irq); + return mc13xxx_get_flags(mc13783_to_mc13xxx(mc13783)); } -static inline int mc13783_unmask(struct mc13783 *mc13783, int irq) __deprecated; -static inline int mc13783_unmask(struct mc13783 *mc13783, int irq) +static inline int mc13783_irq_request(struct mc13783 *mc13783, int irq, + irq_handler_t handler, const char *name, void *dev) { - return mc13783_irq_unmask(mc13783, irq); + return mc13xxx_irq_request(mc13783_to_mc13xxx(mc13783), irq, + handler, name, dev); } -static inline int mc13783_ackirq(struct mc13783 *mc13783, int irq) __deprecated; -static inline int mc13783_ackirq(struct mc13783 *mc13783, int irq) +static inline int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq, + irq_handler_t handler, const char *name, void *dev) { - return mc13783_irq_ack(mc13783, irq); + return mc13xxx_irq_request_nounmask(mc13783_to_mc13xxx(mc13783), irq, + handler, name, dev); +} + +static inline int mc13783_irq_free(struct mc13783 *mc13783, int irq, void *dev) +{ + return mc13xxx_irq_free(mc13783_to_mc13xxx(mc13783), irq, dev); +} + +static inline int mc13783_irq_mask(struct mc13783 *mc13783, int irq) +{ + return mc13xxx_irq_mask(mc13783_to_mc13xxx(mc13783), irq); +} + +static inline int mc13783_irq_unmask(struct mc13783 *mc13783, int irq) +{ + return mc13xxx_irq_unmask(mc13783_to_mc13xxx(mc13783), irq); +} +static inline int mc13783_irq_status(struct mc13783 *mc13783, int irq, + int *enabled, int *pending) +{ + return mc13xxx_irq_status(mc13783_to_mc13xxx(mc13783), + irq, enabled, pending); +} + +static inline int mc13783_irq_ack(struct mc13783 *mc13783, int irq) +{ + return mc13xxx_irq_ack(mc13783_to_mc13xxx(mc13783), irq); } #define MC13783_ADC0 43 @@ -64,96 +101,18 @@ static inline int mc13783_ackirq(struct mc13783 *mc13783, int irq) MC13783_ADC0_TSMOD1 | \ MC13783_ADC0_TSMOD2) -struct mc13783_led_platform_data { -#define MC13783_LED_MD 0 -#define MC13783_LED_AD 1 -#define MC13783_LED_KP 2 -#define MC13783_LED_R1 3 -#define MC13783_LED_G1 4 -#define MC13783_LED_B1 5 -#define MC13783_LED_R2 6 -#define MC13783_LED_G2 7 -#define MC13783_LED_B2 8 -#define MC13783_LED_R3 9 -#define MC13783_LED_G3 10 -#define MC13783_LED_B3 11 -#define MC13783_LED_MAX MC13783_LED_B3 - int id; - const char *name; - const char *default_trigger; - -/* Three or two bits current selection depending on the led */ - char max_current; -}; - -struct mc13783_leds_platform_data { - int num_leds; - struct mc13783_led_platform_data *led; - -#define MC13783_LED_TRIODE_MD (1 << 0) -#define MC13783_LED_TRIODE_AD (1 << 1) -#define MC13783_LED_TRIODE_KP (1 << 2) -#define MC13783_LED_BOOST_EN (1 << 3) -#define MC13783_LED_TC1HALF (1 << 4) -#define MC13783_LED_SLEWLIMTC (1 << 5) -#define MC13783_LED_SLEWLIMBL (1 << 6) -#define MC13783_LED_TRIODE_TC1 (1 << 7) -#define MC13783_LED_TRIODE_TC2 (1 << 8) -#define MC13783_LED_TRIODE_TC3 (1 << 9) - int flags; - -#define MC13783_LED_AB_DISABLED 0 -#define MC13783_LED_AB_MD1 1 -#define MC13783_LED_AB_MD12 2 -#define MC13783_LED_AB_MD123 3 -#define MC13783_LED_AB_MD1234 4 -#define MC13783_LED_AB_MD1234_AD1 5 -#define MC13783_LED_AB_MD1234_AD12 6 -#define MC13783_LED_AB_MD1_AD 7 - char abmode; - -#define MC13783_LED_ABREF_200MV 0 -#define MC13783_LED_ABREF_400MV 1 -#define MC13783_LED_ABREF_600MV 2 -#define MC13783_LED_ABREF_800MV 3 - char abref; - -#define MC13783_LED_PERIOD_10MS 0 -#define MC13783_LED_PERIOD_100MS 1 -#define MC13783_LED_PERIOD_500MS 2 -#define MC13783_LED_PERIOD_2S 3 - char bl_period; - char tc1_period; - char tc2_period; - char tc3_period; -}; - -/* to be cleaned up */ -struct regulator_init_data; - -struct mc13783_regulator_init_data { - int id; - struct regulator_init_data *init_data; -}; - -struct mc13783_regulator_platform_data { - int num_regulators; - struct mc13783_regulator_init_data *regulators; -}; - -struct mc13783_platform_data { - int num_regulators; - struct mc13783_regulator_init_data *regulators; - struct mc13783_leds_platform_data *leds; - -#define MC13783_USE_TOUCHSCREEN (1 << 0) -#define MC13783_USE_CODEC (1 << 1) -#define MC13783_USE_ADC (1 << 2) -#define MC13783_USE_RTC (1 << 3) -#define MC13783_USE_REGULATOR (1 << 4) -#define MC13783_USE_LED (1 << 5) - unsigned int flags; -}; +#define mc13783_regulator_init_data mc13xxx_regulator_init_data +#define mc13783_regulator_platform_data mc13xxx_regulator_platform_data +#define mc13783_led_platform_data mc13xxx_led_platform_data +#define mc13783_leds_platform_data mc13xxx_leds_platform_data + +#define mc13783_platform_data mc13xxx_platform_data +#define MC13783_USE_TOUCHSCREEN MC13XXX_USE_TOUCHSCREEN +#define MC13783_USE_CODEC MC13XXX_USE_CODEC +#define MC13783_USE_ADC MC13XXX_USE_ADC +#define MC13783_USE_RTC MC13XXX_USE_RTC +#define MC13783_USE_REGULATOR MC13XXX_USE_REGULATOR +#define MC13783_USE_LED MC13XXX_USE_LED #define MC13783_ADC_MODE_TS 1 #define MC13783_ADC_MODE_SINGLE_CHAN 2 @@ -197,46 +156,46 @@ int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode, #define MC13783_REGU_PWGT1SPI 31 #define MC13783_REGU_PWGT2SPI 32 -#define MC13783_IRQ_ADCDONE 0 -#define MC13783_IRQ_ADCBISDONE 1 -#define MC13783_IRQ_TS 2 +#define MC13783_IRQ_ADCDONE MC13XXX_IRQ_ADCDONE +#define MC13783_IRQ_ADCBISDONE MC13XXX_IRQ_ADCBISDONE +#define MC13783_IRQ_TS MC13XXX_IRQ_TS #define MC13783_IRQ_WHIGH 3 #define MC13783_IRQ_WLOW 4 -#define MC13783_IRQ_CHGDET 6 +#define MC13783_IRQ_CHGDET MC13XXX_IRQ_CHGDET #define MC13783_IRQ_CHGOV 7 -#define MC13783_IRQ_CHGREV 8 -#define MC13783_IRQ_CHGSHORT 9 -#define MC13783_IRQ_CCCV 10 -#define MC13783_IRQ_CHGCURR 11 -#define MC13783_IRQ_BPON 12 -#define MC13783_IRQ_LOBATL 13 -#define MC13783_IRQ_LOBATH 14 +#define MC13783_IRQ_CHGREV MC13XXX_IRQ_CHGREV +#define MC13783_IRQ_CHGSHORT MC13XXX_IRQ_CHGSHORT +#define MC13783_IRQ_CCCV MC13XXX_IRQ_CCCV +#define MC13783_IRQ_CHGCURR MC13XXX_IRQ_CHGCURR +#define MC13783_IRQ_BPON MC13XXX_IRQ_BPON +#define MC13783_IRQ_LOBATL MC13XXX_IRQ_LOBATL +#define MC13783_IRQ_LOBATH MC13XXX_IRQ_LOBATH #define MC13783_IRQ_UDP 15 #define MC13783_IRQ_USB 16 #define MC13783_IRQ_ID 19 #define MC13783_IRQ_SE1 21 #define MC13783_IRQ_CKDET 22 #define MC13783_IRQ_UDM 23 -#define MC13783_IRQ_1HZ 24 -#define MC13783_IRQ_TODA 25 +#define MC13783_IRQ_1HZ MC13XXX_IRQ_1HZ +#define MC13783_IRQ_TODA MC13XXX_IRQ_TODA #define MC13783_IRQ_ONOFD1 27 #define MC13783_IRQ_ONOFD2 28 #define MC13783_IRQ_ONOFD3 29 -#define MC13783_IRQ_SYSRST 30 -#define MC13783_IRQ_RTCRST 31 -#define MC13783_IRQ_PC 32 -#define MC13783_IRQ_WARM 33 -#define MC13783_IRQ_MEMHLD 34 +#define MC13783_IRQ_SYSRST MC13XXX_IRQ_SYSRST +#define MC13783_IRQ_RTCRST MC13XXX_IRQ_RTCRST +#define MC13783_IRQ_PC MC13XXX_IRQ_PC +#define MC13783_IRQ_WARM MC13XXX_IRQ_WARM +#define MC13783_IRQ_MEMHLD MC13XXX_IRQ_MEMHLD #define MC13783_IRQ_PWRRDY 35 -#define MC13783_IRQ_THWARNL 36 -#define MC13783_IRQ_THWARNH 37 -#define MC13783_IRQ_CLK 38 +#define MC13783_IRQ_THWARNL MC13XXX_IRQ_THWARNL +#define MC13783_IRQ_THWARNH MC13XXX_IRQ_THWARNH +#define MC13783_IRQ_CLK MC13XXX_IRQ_CLK #define MC13783_IRQ_SEMAF 39 #define MC13783_IRQ_MC2B 41 #define MC13783_IRQ_HSDET 42 #define MC13783_IRQ_HSL 43 #define MC13783_IRQ_ALSPTH 44 #define MC13783_IRQ_AHSSHORT 45 -#define MC13783_NUM_IRQ 46 +#define MC13783_NUM_IRQ MC13XXX_NUM_IRQ -#endif /* __LINUX_MFD_MC13783_H */ +#endif /* ifndef __LINUX_MFD_MC13783_H */ diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h new file mode 100644 index 000000000000..a1d391b40e68 --- /dev/null +++ b/include/linux/mfd/mc13xxx.h @@ -0,0 +1,154 @@ +/* + * Copyright 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#ifndef __LINUX_MFD_MC13XXX_H +#define __LINUX_MFD_MC13XXX_H + +#include <linux/interrupt.h> + +struct mc13xxx; + +void mc13xxx_lock(struct mc13xxx *mc13xxx); +void mc13xxx_unlock(struct mc13xxx *mc13xxx); + +int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val); +int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val); +int mc13xxx_reg_rmw(struct mc13xxx *mc13xxx, unsigned int offset, + u32 mask, u32 val); + +int mc13xxx_get_flags(struct mc13xxx *mc13xxx); + +int mc13xxx_irq_request(struct mc13xxx *mc13xxx, int irq, + irq_handler_t handler, const char *name, void *dev); +int mc13xxx_irq_request_nounmask(struct mc13xxx *mc13xxx, int irq, + irq_handler_t handler, const char *name, void *dev); +int mc13xxx_irq_free(struct mc13xxx *mc13xxx, int irq, void *dev); + +int mc13xxx_irq_mask(struct mc13xxx *mc13xxx, int irq); +int mc13xxx_irq_unmask(struct mc13xxx *mc13xxx, int irq); +int mc13xxx_irq_status(struct mc13xxx *mc13xxx, int irq, + int *enabled, int *pending); +int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq); + +int mc13xxx_get_flags(struct mc13xxx *mc13xxx); + +#define MC13XXX_IRQ_ADCDONE 0 +#define MC13XXX_IRQ_ADCBISDONE 1 +#define MC13XXX_IRQ_TS 2 +#define MC13XXX_IRQ_CHGDET 6 +#define MC13XXX_IRQ_CHGREV 8 +#define MC13XXX_IRQ_CHGSHORT 9 +#define MC13XXX_IRQ_CCCV 10 +#define MC13XXX_IRQ_CHGCURR 11 +#define MC13XXX_IRQ_BPON 12 +#define MC13XXX_IRQ_LOBATL 13 +#define MC13XXX_IRQ_LOBATH 14 +#define MC13XXX_IRQ_1HZ 24 +#define MC13XXX_IRQ_TODA 25 +#define MC13XXX_IRQ_SYSRST 30 +#define MC13XXX_IRQ_RTCRST 31 +#define MC13XXX_IRQ_PC 32 +#define MC13XXX_IRQ_WARM 33 +#define MC13XXX_IRQ_MEMHLD 34 +#define MC13XXX_IRQ_THWARNL 36 +#define MC13XXX_IRQ_THWARNH 37 +#define MC13XXX_IRQ_CLK 38 + +#define MC13XXX_NUM_IRQ 46 + +struct regulator_init_data; + +struct mc13xxx_regulator_init_data { + int id; + struct regulator_init_data *init_data; +}; + +struct mc13xxx_regulator_platform_data { + int num_regulators; + struct mc13xxx_regulator_init_data *regulators; +}; + +struct mc13xxx_led_platform_data { +#define MC13783_LED_MD 0 +#define MC13783_LED_AD 1 +#define MC13783_LED_KP 2 +#define MC13783_LED_R1 3 +#define MC13783_LED_G1 4 +#define MC13783_LED_B1 5 +#define MC13783_LED_R2 6 +#define MC13783_LED_G2 7 +#define MC13783_LED_B2 8 +#define MC13783_LED_R3 9 +#define MC13783_LED_G3 10 +#define MC13783_LED_B3 11 +#define MC13783_LED_MAX MC13783_LED_B3 + int id; + const char *name; + const char *default_trigger; + +/* Three or two bits current selection depending on the led */ + char max_current; +}; + +struct mc13xxx_leds_platform_data { + int num_leds; + struct mc13xxx_led_platform_data *led; + +#define MC13783_LED_TRIODE_MD (1 << 0) +#define MC13783_LED_TRIODE_AD (1 << 1) +#define MC13783_LED_TRIODE_KP (1 << 2) +#define MC13783_LED_BOOST_EN (1 << 3) +#define MC13783_LED_TC1HALF (1 << 4) +#define MC13783_LED_SLEWLIMTC (1 << 5) +#define MC13783_LED_SLEWLIMBL (1 << 6) +#define MC13783_LED_TRIODE_TC1 (1 << 7) +#define MC13783_LED_TRIODE_TC2 (1 << 8) +#define MC13783_LED_TRIODE_TC3 (1 << 9) + int flags; + +#define MC13783_LED_AB_DISABLED 0 +#define MC13783_LED_AB_MD1 1 +#define MC13783_LED_AB_MD12 2 +#define MC13783_LED_AB_MD123 3 +#define MC13783_LED_AB_MD1234 4 +#define MC13783_LED_AB_MD1234_AD1 5 +#define MC13783_LED_AB_MD1234_AD12 6 +#define MC13783_LED_AB_MD1_AD 7 + char abmode; + +#define MC13783_LED_ABREF_200MV 0 +#define MC13783_LED_ABREF_400MV 1 +#define MC13783_LED_ABREF_600MV 2 +#define MC13783_LED_ABREF_800MV 3 + char abref; + +#define MC13783_LED_PERIOD_10MS 0 +#define MC13783_LED_PERIOD_100MS 1 +#define MC13783_LED_PERIOD_500MS 2 +#define MC13783_LED_PERIOD_2S 3 + char bl_period; + char tc1_period; + char tc2_period; + char tc3_period; +}; + +struct mc13xxx_platform_data { +#define MC13XXX_USE_TOUCHSCREEN (1 << 0) +#define MC13XXX_USE_CODEC (1 << 1) +#define MC13XXX_USE_ADC (1 << 2) +#define MC13XXX_USE_RTC (1 << 3) +#define MC13XXX_USE_REGULATOR (1 << 4) +#define MC13XXX_USE_LED (1 << 5) + unsigned int flags; + + int num_regulators; + struct mc13xxx_regulator_init_data *regulators; + struct mc13xxx_leds_platform_data *leds; +}; + +#endif /* ifndef __LINUX_MFD_MC13XXX_H */ diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index ad411a78870c..50d4a047118d 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -227,4 +227,11 @@ static inline struct pcf50633 *dev_to_pcf50633(struct device *dev) return dev_get_drvdata(dev); } +int pcf50633_irq_init(struct pcf50633 *pcf, int irq); +void pcf50633_irq_free(struct pcf50633 *pcf); +#ifdef CONFIG_PM +int pcf50633_irq_suspend(struct pcf50633 *pcf); +int pcf50633_irq_resume(struct pcf50633 *pcf); +#endif + #endif diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h index 49067802a6d7..c981b959760f 100644 --- a/include/linux/mfd/sh_mobile_sdhi.h +++ b/include/linux/mfd/sh_mobile_sdhi.h @@ -7,8 +7,10 @@ struct sh_mobile_sdhi_info { int dma_slave_tx; int dma_slave_rx; unsigned long tmio_flags; + unsigned long tmio_caps; u32 tmio_ocr_mask; /* available MMC voltages */ void (*set_pwr)(struct platform_device *pdev, int state); + int (*get_cd)(struct platform_device *pdev); }; #endif /* __SH_MOBILE_SDHI_H__ */ diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h new file mode 100644 index 000000000000..e762c270d8d4 --- /dev/null +++ b/include/linux/mfd/stmpe.h @@ -0,0 +1,207 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#ifndef __LINUX_MFD_STMPE_H +#define __LINUX_MFD_STMPE_H + +#include <linux/device.h> + +enum stmpe_block { + STMPE_BLOCK_GPIO = 1 << 0, + STMPE_BLOCK_KEYPAD = 1 << 1, + STMPE_BLOCK_TOUCHSCREEN = 1 << 2, + STMPE_BLOCK_ADC = 1 << 3, + STMPE_BLOCK_PWM = 1 << 4, + STMPE_BLOCK_ROTATOR = 1 << 5, +}; + +enum stmpe_partnum { + STMPE811, + STMPE1601, + STMPE2401, + STMPE2403, +}; + +/* + * For registers whose locations differ on variants, the correct address is + * obtained by indexing stmpe->regs with one of the following. + */ +enum { + STMPE_IDX_CHIP_ID, + STMPE_IDX_ICR_LSB, + STMPE_IDX_IER_LSB, + STMPE_IDX_ISR_MSB, + STMPE_IDX_GPMR_LSB, + STMPE_IDX_GPSR_LSB, + STMPE_IDX_GPCR_LSB, + STMPE_IDX_GPDR_LSB, + STMPE_IDX_GPEDR_MSB, + STMPE_IDX_GPRER_LSB, + STMPE_IDX_GPFER_LSB, + STMPE_IDX_GPAFR_U_MSB, + STMPE_IDX_IEGPIOR_LSB, + STMPE_IDX_ISGPIOR_MSB, + STMPE_IDX_MAX, +}; + + +struct stmpe_variant_info; + +/** + * struct stmpe - STMPE MFD structure + * @lock: lock protecting I/O operations + * @irq_lock: IRQ bus lock + * @dev: device, mostly for dev_dbg() + * @i2c: i2c client + * @variant: the detected STMPE model number + * @regs: list of addresses of registers which are at different addresses on + * different variants. Indexed by one of STMPE_IDX_*. + * @irq_base: starting IRQ number for internal IRQs + * @num_gpios: number of gpios, differs for variants + * @ier: cache of IER registers for bus_lock + * @oldier: cache of IER registers for bus_lock + * @pdata: platform data + */ +struct stmpe { + struct mutex lock; + struct mutex irq_lock; + struct device *dev; + struct i2c_client *i2c; + enum stmpe_partnum partnum; + struct stmpe_variant_info *variant; + const u8 *regs; + + int irq_base; + int num_gpios; + u8 ier[2]; + u8 oldier[2]; + struct stmpe_platform_data *pdata; +}; + +extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data); +extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg); +extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, + u8 *values); +extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, + const u8 *values); +extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val); +extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, + enum stmpe_block block); +extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks); +extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); + +struct matrix_keymap_data; + +/** + * struct stmpe_keypad_platform_data - STMPE keypad platform data + * @keymap_data: key map table and size + * @debounce_ms: debounce interval, in ms. Maximum is + * %STMPE_KEYPAD_MAX_DEBOUNCE. + * @scan_count: number of key scanning cycles to confirm key data. + * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT. + * @no_autorepeat: disable key autorepeat + */ +struct stmpe_keypad_platform_data { + struct matrix_keymap_data *keymap_data; + unsigned int debounce_ms; + unsigned int scan_count; + bool no_autorepeat; +}; + +#define STMPE_GPIO_NOREQ_811_TOUCH (0xf0) + +/** + * struct stmpe_gpio_platform_data - STMPE GPIO platform data + * @gpio_base: first gpio number assigned. A maximum of + * %STMPE_NR_GPIOS GPIOs will be allocated. + * @norequest_mask: bitmask specifying which GPIOs should _not_ be + * requestable due to different usage (e.g. touch, keypad) + * STMPE_GPIO_NOREQ_* macros can be used here. + */ +struct stmpe_gpio_platform_data { + int gpio_base; + unsigned norequest_mask; + void (*setup)(struct stmpe *stmpe, unsigned gpio_base); + void (*remove)(struct stmpe *stmpe, unsigned gpio_base); +}; + +/** + * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform + * data + * @sample_time: ADC converstion time in number of clock. + * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, + * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), + * recommended is 4. + * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) + * @ref_sel: ADC reference source + * (0 -> internal reference, 1 -> external reference) + * @adc_freq: ADC Clock speed + * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) + * @ave_ctrl: Sample average control + * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) + * @touch_det_delay: Touch detect interrupt delay + * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, + * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) + * recommended is 3 + * @settling: Panel driver settling time + * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, + * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) + * recommended is 2 + * @fraction_z: Length of the fractional part in z + * (fraction_z ([0..7]) = Count of the fractional part) + * recommended is 7 + * @i_drive: current limit value of the touchscreen drivers + * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) + * + * */ +struct stmpe_ts_platform_data { + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; + u8 ave_ctrl; + u8 touch_det_delay; + u8 settling; + u8 fraction_z; + u8 i_drive; +}; + +/** + * struct stmpe_platform_data - STMPE platform data + * @id: device id to distinguish between multiple STMPEs on the same board + * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*) + * @irq_trigger: IRQ trigger to use for the interrupt to the host + * @irq_invert_polarity: IRQ line is connected with reversed polarity + * @autosleep: bool to enable/disable stmpe autosleep + * @autosleep_timeout: inactivity timeout in milliseconds for autosleep + * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or + * %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used. + * @gpio: GPIO-specific platform data + * @keypad: keypad-specific platform data + * @ts: touchscreen-specific platform data + */ +struct stmpe_platform_data { + int id; + unsigned int blocks; + int irq_base; + unsigned int irq_trigger; + bool irq_invert_polarity; + bool autosleep; + int autosleep_timeout; + + struct stmpe_gpio_platform_data *gpio; + struct stmpe_keypad_platform_data *keypad; + struct stmpe_ts_platform_data *ts; +}; + +#define STMPE_NR_INTERNAL_IRQS 9 +#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x)) + +#define STMPE_NR_GPIOS 24 +#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS) + +#endif diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h index e47f770d3068..eff3094ca84e 100644 --- a/include/linux/mfd/tc35892.h +++ b/include/linux/mfd/tc35892.h @@ -111,9 +111,13 @@ extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val); * struct tc35892_gpio_platform_data - TC35892 GPIO platform data * @gpio_base: first gpio number assigned to TC35892. A maximum of * %TC35892_NR_GPIOS GPIOs will be allocated. + * @setup: callback for board-specific initialization + * @remove: callback for board-specific teardown */ struct tc35892_gpio_platform_data { int gpio_base; + void (*setup)(struct tc35892 *tc35892, unsigned gpio_base); + void (*remove)(struct tc35892 *tc35892, unsigned gpio_base); }; /** diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index f07425bc3dcd..085f041197dc 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -52,6 +52,11 @@ /* tmio MMC platform flags */ #define TMIO_MMC_WRPROTECT_DISABLE (1 << 0) +/* + * Some controllers can support a 2-byte block size when the bus width + * is configured in 4-bit mode. + */ +#define TMIO_MMC_BLKSZ_2BYTES (1 << 1) int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); @@ -74,6 +79,7 @@ struct tmio_mmc_data { struct tmio_mmc_dma *dma; void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); + int (*get_cd)(struct platform_device *host); }; /* diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h new file mode 100644 index 000000000000..b6bab1b04e25 --- /dev/null +++ b/include/linux/mfd/tps6586x.h @@ -0,0 +1,78 @@ +#ifndef __LINUX_MFD_TPS6586X_H +#define __LINUX_MFD_TPS6586X_H + +enum { + TPS6586X_ID_SM_0, + TPS6586X_ID_SM_1, + TPS6586X_ID_SM_2, + TPS6586X_ID_LDO_0, + TPS6586X_ID_LDO_1, + TPS6586X_ID_LDO_2, + TPS6586X_ID_LDO_3, + TPS6586X_ID_LDO_4, + TPS6586X_ID_LDO_5, + TPS6586X_ID_LDO_6, + TPS6586X_ID_LDO_7, + TPS6586X_ID_LDO_8, + TPS6586X_ID_LDO_9, + TPS6586X_ID_LDO_RTC, +}; + +enum { + TPS6586X_INT_PLDO_0, + TPS6586X_INT_PLDO_1, + TPS6586X_INT_PLDO_2, + TPS6586X_INT_PLDO_3, + TPS6586X_INT_PLDO_4, + TPS6586X_INT_PLDO_5, + TPS6586X_INT_PLDO_6, + TPS6586X_INT_PLDO_7, + TPS6586X_INT_COMP_DET, + TPS6586X_INT_ADC, + TPS6586X_INT_PLDO_8, + TPS6586X_INT_PLDO_9, + TPS6586X_INT_PSM_0, + TPS6586X_INT_PSM_1, + TPS6586X_INT_PSM_2, + TPS6586X_INT_PSM_3, + TPS6586X_INT_RTC_ALM1, + TPS6586X_INT_ACUSB_OVP, + TPS6586X_INT_USB_DET, + TPS6586X_INT_AC_DET, + TPS6586X_INT_BAT_DET, + TPS6586X_INT_CHG_STAT, + TPS6586X_INT_CHG_TEMP, + TPS6586X_INT_PP, + TPS6586X_INT_RESUME, + TPS6586X_INT_LOW_SYS, + TPS6586X_INT_RTC_ALM2, +}; + +struct tps6586x_subdev_info { + int id; + const char *name; + void *platform_data; +}; + +struct tps6586x_platform_data { + int num_subdevs; + struct tps6586x_subdev_info *subdevs; + + int gpio_base; + int irq_base; +}; + +/* + * NOTE: the functions below are not intended for use outside + * of the TPS6586X sub-device drivers + */ +extern int tps6586x_write(struct device *dev, int reg, uint8_t val); +extern int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val); +extern int tps6586x_read(struct device *dev, int reg, uint8_t *val); +extern int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val); +extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask); +extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask); +extern int tps6586x_update(struct device *dev, int reg, uint8_t val, + uint8_t mask); + +#endif /*__LINUX_MFD_TPS6586X_H */ diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index eb5bd4e0e03c..a1239c48b41a 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -238,6 +238,15 @@ struct regulator_dev; #define WM831X_NUM_IRQ_REGS 5 +enum wm831x_parent { + WM8310 = 0x8310, + WM8311 = 0x8311, + WM8312 = 0x8312, + WM8320 = 0x8320, + WM8321 = 0x8321, + WM8325 = 0x8325, +}; + struct wm831x { struct mutex io_lock; @@ -285,6 +294,9 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg, int count, u16 *buf); +int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq); +void wm831x_device_exit(struct wm831x *wm831x); +int wm831x_device_suspend(struct wm831x *wm831x); int wm831x_irq_init(struct wm831x *wm831x, int irq); void wm831x_irq_exit(struct wm831x *wm831x); diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h index a95141eafce3..bd581c6fa085 100644 --- a/include/linux/mfd/wm8350/audio.h +++ b/include/linux/mfd/wm8350/audio.h @@ -522,9 +522,6 @@ #define WM8350_MCLK_SEL_PLL_32K 3 #define WM8350_MCLK_SEL_MCLK 5 -#define WM8350_MCLK_DIR_OUT 0 -#define WM8350_MCLK_DIR_IN 1 - /* clock divider id's */ #define WM8350_ADC_CLKDIV 0 #define WM8350_DAC_CLKDIV 1 diff --git a/include/linux/mfd/wm8994/gpio.h b/include/linux/mfd/wm8994/gpio.h index b4d4c22991e8..0c79b5ff4b5a 100644 --- a/include/linux/mfd/wm8994/gpio.h +++ b/include/linux/mfd/wm8994/gpio.h @@ -36,6 +36,10 @@ #define WM8994_GP_FN_WSEQ_STATUS 16 #define WM8994_GP_FN_FIFO_ERROR 17 #define WM8994_GP_FN_OPCLK 18 +#define WM8994_GP_FN_THW 19 +#define WM8994_GP_FN_DCS_DONE 20 +#define WM8994_GP_FN_FLL1_OUT 21 +#define WM8994_GP_FN_FLL2_OUT 22 #define WM8994_GPN_DIR 0x8000 /* GPN_DIR */ #define WM8994_GPN_DIR_MASK 0x8000 /* GPN_DIR */ diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 5c51f367c061..add8a1b8bcf0 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -29,7 +29,7 @@ struct wm8994_ldo_pdata { #define WM8994_CONFIGURE_GPIO 0x8000 #define WM8994_DRC_REGS 5 -#define WM8994_EQ_REGS 19 +#define WM8994_EQ_REGS 20 /** * DRC configurations are specified with a label and a set of register |
