Merge v2.6.37-rc8 into powerpc/next

19 files changed, 878 insertions, 371 deletions

diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
index bfd23bef7363..4db1fbd8969e 100644
--- a/include/linux/mfd/88pm860x.h
+++ b/include/linux/mfd/88pm860x.h
@@ -138,7 +138,7 @@ enum {
 	PM8607_ID_RG_MAX,
 };
 
-#define PM8607_VERSION			(0x40)	/* 8607 chip ID */
+/* 8607 chip ID is 0x40 or 0x50 */
 #define PM8607_VERSION_MASK		(0xF0)	/* 8607 chip ID mask */
 
 /* Interrupt Registers */
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
index b63ff3ba3351..d63b6050b183 100644
--- a/include/linux/mfd/ab8500.h
+++ b/include/linux/mfd/ab8500.h
@@ -10,6 +10,29 @@
 #include <linux/device.h>
 
 /*
+ * AB8500 bank addresses
+ */
+#define AB8500_SYS_CTRL1_BLOCK	0x1
+#define AB8500_SYS_CTRL2_BLOCK	0x2
+#define AB8500_REGU_CTRL1	0x3
+#define AB8500_REGU_CTRL2	0x4
+#define AB8500_USB		0x5
+#define AB8500_TVOUT		0x6
+#define AB8500_DBI		0x7
+#define AB8500_ECI_AV_ACC	0x8
+#define AB8500_RESERVED		0x9
+#define AB8500_GPADC		0xA
+#define AB8500_CHARGER		0xB
+#define AB8500_GAS_GAUGE	0xC
+#define AB8500_AUDIO		0xD
+#define AB8500_INTERRUPT	0xE
+#define AB8500_RTC		0xF
+#define AB8500_MISC		0x10
+#define AB8500_DEBUG		0x12
+#define AB8500_PROD_TEST	0x13
+#define AB8500_OTP_EMUL		0x15
+
+/*
  * Interrupts
  */
 
@@ -76,6 +99,8 @@
 #define AB8500_NR_IRQS			104
 #define AB8500_NUM_IRQ_REGS		13
 
+#define AB8500_NUM_REGULATORS   15
+
 /**
  * struct ab8500 - ab8500 internal structure
  * @dev: parent device
@@ -97,6 +122,7 @@ struct ab8500 {
 	int		revision;
 	int		irq_base;
 	int		irq;
+	u8		chip_id;
 
 	int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
 	int (*read) (struct ab8500 *a8500, u16 addr);
@@ -108,20 +134,20 @@ struct ab8500 {
 	u8 oldmask[AB8500_NUM_IRQ_REGS];
 };
 
+struct regulator_init_data;
+
 /**
  * struct ab8500_platform_data - AB8500 platform data
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
  * @init: board-specific initialization after detection of ab8500
+ * @regulator: machine-specific constraints for regulators
  */
 struct ab8500_platform_data {
 	int irq_base;
 	void (*init) (struct ab8500 *);
+	struct regulator_init_data *regulator[AB8500_NUM_REGULATORS];
 };
 
-extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
-extern int ab8500_read(struct ab8500 *a8500, u16 addr);
-extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data);
-
 extern int __devinit ab8500_init(struct ab8500 *ab8500);
 extern int __devexit ab8500_exit(struct ab8500 *ab8500);
 
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 390726fcbcb1..67bd6f7ecf32 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -6,8 +6,7 @@
  *
  * ABX500 core access functions.
  * The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab3550, ab5500 and possibly comming. It is not used for
- * ab4500 and ab8500 since they are another family of chip.
+ * ab3100, ab3550, ab5500, and ab8500.
  *
  * Author: Mattias Wallin <mattias.wallin@stericsson.com>
  * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
@@ -230,4 +229,5 @@ struct abx500_ops {
 };
 
 int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops);
+void abx500_remove_ops(struct device *dev);
 #endif
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index 11d740b8831d..cb93d80aa642 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -44,6 +44,9 @@ struct mfd_cell {
 	 */
 	int			num_resources;
 	const struct resource	*resources;
+
+	/* don't check for resource conflicts */
+	bool			ignore_resource_conflicts;
 };
 
 extern int mfd_add_devices(struct device *parent, int id,
diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h
new file mode 100644
index 000000000000..7363dea6bbcd
--- /dev/null
+++ b/include/linux/mfd/max8998-private.h
@@ -0,0 +1,175 @@
+/*
+ * max8998.h - Voltage regulator driver for the Maxim 8998
+ *
+ *  Copyright (C) 2009-2010 Samsung Electrnoics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_MAX8998_PRIV_H
+#define __LINUX_MFD_MAX8998_PRIV_H
+
+#define MAX8998_NUM_IRQ_REGS	4
+
+/* MAX 8998 registers */
+enum {
+	MAX8998_REG_IRQ1,
+	MAX8998_REG_IRQ2,
+	MAX8998_REG_IRQ3,
+	MAX8998_REG_IRQ4,
+	MAX8998_REG_IRQM1,
+	MAX8998_REG_IRQM2,
+	MAX8998_REG_IRQM3,
+	MAX8998_REG_IRQM4,
+	MAX8998_REG_STATUS1,
+	MAX8998_REG_STATUS2,
+	MAX8998_REG_STATUSM1,
+	MAX8998_REG_STATUSM2,
+	MAX8998_REG_CHGR1,
+	MAX8998_REG_CHGR2,
+	MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
+	MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
+	MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+	MAX8998_REG_ONOFF1,
+	MAX8998_REG_ONOFF2,
+	MAX8998_REG_ONOFF3,
+	MAX8998_REG_ONOFF4,
+	MAX8998_REG_BUCK1_VOLTAGE1,
+	MAX8998_REG_BUCK1_VOLTAGE2,
+	MAX8998_REG_BUCK1_VOLTAGE3,
+	MAX8998_REG_BUCK1_VOLTAGE4,
+	MAX8998_REG_BUCK2_VOLTAGE1,
+	MAX8998_REG_BUCK2_VOLTAGE2,
+	MAX8998_REG_BUCK3,
+	MAX8998_REG_BUCK4,
+	MAX8998_REG_LDO2_LDO3,
+	MAX8998_REG_LDO4,
+	MAX8998_REG_LDO5,
+	MAX8998_REG_LDO6,
+	MAX8998_REG_LDO7,
+	MAX8998_REG_LDO8_LDO9,
+	MAX8998_REG_LDO10_LDO11,
+	MAX8998_REG_LDO12,
+	MAX8998_REG_LDO13,
+	MAX8998_REG_LDO14,
+	MAX8998_REG_LDO15,
+	MAX8998_REG_LDO16,
+	MAX8998_REG_LDO17,
+	MAX8998_REG_BKCHR,
+	MAX8998_REG_LBCNFG1,
+	MAX8998_REG_LBCNFG2,
+};
+
+/* IRQ definitions */
+enum {
+	MAX8998_IRQ_DCINF,
+	MAX8998_IRQ_DCINR,
+	MAX8998_IRQ_JIGF,
+	MAX8998_IRQ_JIGR,
+	MAX8998_IRQ_PWRONF,
+	MAX8998_IRQ_PWRONR,
+
+	MAX8998_IRQ_WTSREVNT,
+	MAX8998_IRQ_SMPLEVNT,
+	MAX8998_IRQ_ALARM1,
+	MAX8998_IRQ_ALARM0,
+
+	MAX8998_IRQ_ONKEY1S,
+	MAX8998_IRQ_TOPOFFR,
+	MAX8998_IRQ_DCINOVPR,
+	MAX8998_IRQ_CHGRSTF,
+	MAX8998_IRQ_DONER,
+	MAX8998_IRQ_CHGFAULT,
+
+	MAX8998_IRQ_LOBAT1,
+	MAX8998_IRQ_LOBAT2,
+
+	MAX8998_IRQ_NR,
+};
+
+/* MAX8998 various variants */
+enum {
+	TYPE_MAX8998 = 0, /* Default */
+	TYPE_LP3974,	/* National version of MAX8998 */
+	TYPE_LP3979,	/* Added AVS */
+};
+
+#define MAX8998_IRQ_DCINF_MASK		(1 << 2)
+#define MAX8998_IRQ_DCINR_MASK		(1 << 3)
+#define MAX8998_IRQ_JIGF_MASK		(1 << 4)
+#define MAX8998_IRQ_JIGR_MASK		(1 << 5)
+#define MAX8998_IRQ_PWRONF_MASK		(1 << 6)
+#define MAX8998_IRQ_PWRONR_MASK		(1 << 7)
+
+#define MAX8998_IRQ_WTSREVNT_MASK	(1 << 0)
+#define MAX8998_IRQ_SMPLEVNT_MASK	(1 << 1)
+#define MAX8998_IRQ_ALARM1_MASK		(1 << 2)
+#define MAX8998_IRQ_ALARM0_MASK		(1 << 3)
+
+#define MAX8998_IRQ_ONKEY1S_MASK	(1 << 0)
+#define MAX8998_IRQ_TOPOFFR_MASK	(1 << 2)
+#define MAX8998_IRQ_DCINOVPR_MASK	(1 << 3)
+#define MAX8998_IRQ_CHGRSTF_MASK	(1 << 4)
+#define MAX8998_IRQ_DONER_MASK		(1 << 5)
+#define MAX8998_IRQ_CHGFAULT_MASK	(1 << 7)
+
+#define MAX8998_IRQ_LOBAT1_MASK		(1 << 0)
+#define MAX8998_IRQ_LOBAT2_MASK		(1 << 1)
+
+#define MAX8998_ENRAMP                  (1 << 4)
+
+/**
+ * struct max8998_dev - max8998 master device for sub-drivers
+ * @dev: master device of the chip (can be used to access platform data)
+ * @i2c: i2c client private data for regulator
+ * @rtc: i2c client private data for rtc
+ * @iolock: mutex for serializing io access
+ * @irqlock: mutex for buslock
+ * @irq_base: base IRQ number for max8998, required for IRQs
+ * @irq: generic IRQ number for max8998
+ * @ono: power onoff IRQ number for max8998
+ * @irq_masks_cur: currently active value
+ * @irq_masks_cache: cached hardware value
+ * @type: indicate which max8998 "variant" is used
+ */
+struct max8998_dev {
+	struct device *dev;
+	struct i2c_client *i2c;
+	struct i2c_client *rtc;
+	struct mutex iolock;
+	struct mutex irqlock;
+
+	int irq_base;
+	int irq;
+	int ono;
+	u8 irq_masks_cur[MAX8998_NUM_IRQ_REGS];
+	u8 irq_masks_cache[MAX8998_NUM_IRQ_REGS];
+	int type;
+};
+
+int max8998_irq_init(struct max8998_dev *max8998);
+void max8998_irq_exit(struct max8998_dev *max8998);
+
+extern int max8998_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest);
+extern int max8998_bulk_read(struct i2c_client *i2c, u8 reg, int count,
+		u8 *buf);
+extern int max8998_write_reg(struct i2c_client *i2c, u8 reg, u8 value);
+extern int max8998_bulk_write(struct i2c_client *i2c, u8 reg, int count,
+		u8 *buf);
+extern int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask);
+
+#endif /*  __LINUX_MFD_MAX8998_PRIV_H */
diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
new file mode 100644
index 000000000000..f8c9f884aff2
--- /dev/null
+++ b/include/linux/mfd/max8998.h
@@ -0,0 +1,93 @@
+/*
+ * max8998.h - Voltage regulator driver for the Maxim 8998
+ *
+ *  Copyright (C) 2009-2010 Samsung Electrnoics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_MAX8998_H
+#define __LINUX_MFD_MAX8998_H
+
+#include <linux/regulator/machine.h>
+
+/* MAX 8998 regulator ids */
+enum {
+	MAX8998_LDO2 = 2,
+	MAX8998_LDO3,
+	MAX8998_LDO4,
+	MAX8998_LDO5,
+	MAX8998_LDO6,
+	MAX8998_LDO7,
+	MAX8998_LDO8,
+	MAX8998_LDO9,
+	MAX8998_LDO10,
+	MAX8998_LDO11,
+	MAX8998_LDO12,
+	MAX8998_LDO13,
+	MAX8998_LDO14,
+	MAX8998_LDO15,
+	MAX8998_LDO16,
+	MAX8998_LDO17,
+	MAX8998_BUCK1,
+	MAX8998_BUCK2,
+	MAX8998_BUCK3,
+	MAX8998_BUCK4,
+	MAX8998_EN32KHZ_AP,
+	MAX8998_EN32KHZ_CP,
+	MAX8998_ENVICHG,
+	MAX8998_ESAFEOUT1,
+	MAX8998_ESAFEOUT2,
+};
+
+/**
+ * max8998_regulator_data - regulator data
+ * @id: regulator id
+ * @initdata: regulator init data (contraints, supplies, ...)
+ */
+struct max8998_regulator_data {
+	int				id;
+	struct regulator_init_data	*initdata;
+};
+
+/**
+ * struct max8998_board - packages regulator init data
+ * @regulators: array of defined regulators
+ * @num_regulators: number of regultors used
+ * @irq_base: base IRQ number for max8998, required for IRQs
+ * @ono: power onoff IRQ number for max8998
+ * @buck1_max_voltage1: BUCK1 maximum alowed voltage register 1
+ * @buck1_max_voltage2: BUCK1 maximum alowed voltage register 2
+ * @buck2_max_voltage: BUCK2 maximum alowed voltage
+ * @buck1_set1: BUCK1 gpio pin 1 to set output voltage
+ * @buck1_set2: BUCK1 gpio pin 2 to set output voltage
+ * @buck2_set3: BUCK2 gpio pin to set output voltage
+ */
+struct max8998_platform_data {
+	struct max8998_regulator_data	*regulators;
+	int				num_regulators;
+	int				irq_base;
+	int				ono;
+	int                             buck1_max_voltage1;
+	int                             buck1_max_voltage2;
+	int                             buck2_max_voltage;
+	int				buck1_set1;
+	int				buck1_set2;
+	int				buck2_set3;
+};
+
+#endif /*  __LINUX_MFD_MAX8998_H */
diff --git a/include/linux/mfd/mc13783-private.h b/include/linux/mfd/mc13783-private.h
deleted file mode 100644
index 95cf9360553f..000000000000
--- a/include/linux/mfd/mc13783-private.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Initial development of this code was funded by
- * Phytec Messtechnik GmbH, http://www.phytec.de
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_MFD_MC13783_PRIV_H
-#define __LINUX_MFD_MC13783_PRIV_H
-
-#include <linux/platform_device.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
-
-struct mc13783 {
-	struct spi_device *spidev;
-	struct mutex lock;
-	int irq;
-	int flags;
-
-	irq_handler_t irqhandler[MC13783_NUM_IRQ];
-	void *irqdata[MC13783_NUM_IRQ];
-
-	/* XXX these should go as platformdata to the regulator subdevice */
-	struct mc13783_regulator_init_data *regulators;
-	int num_regulators;
-};
-
-#define MC13783_REG_INTERRUPT_STATUS_0		 0
-#define MC13783_REG_INTERRUPT_MASK_0		 1
-#define MC13783_REG_INTERRUPT_SENSE_0		 2
-#define MC13783_REG_INTERRUPT_STATUS_1		 3
-#define MC13783_REG_INTERRUPT_MASK_1		 4
-#define MC13783_REG_INTERRUPT_SENSE_1		 5
-#define MC13783_REG_POWER_UP_MODE_SENSE		 6
-#define MC13783_REG_REVISION			 7
-#define MC13783_REG_SEMAPHORE			 8
-#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9
-#define MC13783_REG_ARBITRATION_SWITCHERS	10
-#define MC13783_REG_ARBITRATION_REGULATORS_0	11
-#define MC13783_REG_ARBITRATION_REGULATORS_1	12
-#define MC13783_REG_POWER_CONTROL_0		13
-#define MC13783_REG_POWER_CONTROL_1		14
-#define MC13783_REG_POWER_CONTROL_2		15
-#define MC13783_REG_REGEN_ASSIGNMENT		16
-#define MC13783_REG_CONTROL_SPARE		17
-#define MC13783_REG_MEMORY_A			18
-#define MC13783_REG_MEMORY_B			19
-#define MC13783_REG_RTC_TIME			20
-#define MC13783_REG_RTC_ALARM			21
-#define MC13783_REG_RTC_DAY			22
-#define MC13783_REG_RTC_DAY_ALARM		23
-#define MC13783_REG_SWITCHERS_0			24
-#define MC13783_REG_SWITCHERS_1			25
-#define MC13783_REG_SWITCHERS_2			26
-#define MC13783_REG_SWITCHERS_3			27
-#define MC13783_REG_SWITCHERS_4			28
-#define MC13783_REG_SWITCHERS_5			29
-#define MC13783_REG_REGULATOR_SETTING_0		30
-#define MC13783_REG_REGULATOR_SETTING_1		31
-#define MC13783_REG_REGULATOR_MODE_0		32
-#define MC13783_REG_REGULATOR_MODE_1		33
-#define MC13783_REG_POWER_MISCELLANEOUS		34
-#define MC13783_REG_POWER_SPARE			35
-#define MC13783_REG_AUDIO_RX_0			36
-#define MC13783_REG_AUDIO_RX_1			37
-#define MC13783_REG_AUDIO_TX			38
-#define MC13783_REG_AUDIO_SSI_NETWORK		39
-#define MC13783_REG_AUDIO_CODEC			40
-#define MC13783_REG_AUDIO_STEREO_DAC		41
-#define MC13783_REG_AUDIO_SPARE			42
-#define MC13783_REG_ADC_0			43
-#define MC13783_REG_ADC_1			44
-#define MC13783_REG_ADC_2			45
-#define MC13783_REG_ADC_3			46
-#define MC13783_REG_ADC_4			47
-#define MC13783_REG_CHARGER			48
-#define MC13783_REG_USB				49
-#define MC13783_REG_CHARGE_USB_SPARE		50
-#define MC13783_REG_LED_CONTROL_0		51
-#define MC13783_REG_LED_CONTROL_1		52
-#define MC13783_REG_LED_CONTROL_2		53
-#define MC13783_REG_LED_CONTROL_3		54
-#define MC13783_REG_LED_CONTROL_4		55
-#define MC13783_REG_LED_CONTROL_5		56
-#define MC13783_REG_SPARE			57
-#define MC13783_REG_TRIM_0			58
-#define MC13783_REG_TRIM_1			59
-#define MC13783_REG_TEST_0			60
-#define MC13783_REG_TEST_1			61
-#define MC13783_REG_TEST_2			62
-#define MC13783_REG_TEST_3			63
-#define MC13783_REG_NB				64
-
-/*
- * Reg Regulator Mode 0
- */
-#define MC13783_REGCTRL_VAUDIO_EN	(1 << 0)
-#define MC13783_REGCTRL_VAUDIO_STBY	(1 << 1)
-#define MC13783_REGCTRL_VAUDIO_MODE	(1 << 2)
-#define MC13783_REGCTRL_VIOHI_EN	(1 << 3)
-#define MC13783_REGCTRL_VIOHI_STBY	(1 << 4)
-#define MC13783_REGCTRL_VIOHI_MODE	(1 << 5)
-#define MC13783_REGCTRL_VIOLO_EN	(1 << 6)
-#define MC13783_REGCTRL_VIOLO_STBY 	(1 << 7)
-#define MC13783_REGCTRL_VIOLO_MODE	(1 << 8)
-#define MC13783_REGCTRL_VDIG_EN		(1 << 9)
-#define MC13783_REGCTRL_VDIG_STBY	(1 << 10)
-#define MC13783_REGCTRL_VDIG_MODE	(1 << 11)
-#define MC13783_REGCTRL_VGEN_EN		(1 << 12)
-#define MC13783_REGCTRL_VGEN_STBY	(1 << 13)
-#define MC13783_REGCTRL_VGEN_MODE	(1 << 14)
-#define MC13783_REGCTRL_VRFDIG_EN	(1 << 15)
-#define MC13783_REGCTRL_VRFDIG_STBY	(1 << 16)
-#define MC13783_REGCTRL_VRFDIG_MODE	(1 << 17)
-#define MC13783_REGCTRL_VRFREF_EN	(1 << 18)
-#define MC13783_REGCTRL_VRFREF_STBY	(1 << 19)
-#define MC13783_REGCTRL_VRFREF_MODE	(1 << 20)
-#define MC13783_REGCTRL_VRFCP_EN	(1 << 21)
-#define MC13783_REGCTRL_VRFCP_STBY	(1 << 22)
-#define MC13783_REGCTRL_VRFCP_MODE	(1 << 23)
-
-/*
- * Reg Regulator Mode 1
- */
-#define MC13783_REGCTRL_VSIM_EN		(1 << 0)
-#define MC13783_REGCTRL_VSIM_STBY	(1 << 1)
-#define MC13783_REGCTRL_VSIM_MODE	(1 << 2)
-#define MC13783_REGCTRL_VESIM_EN	(1 << 3)
-#define MC13783_REGCTRL_VESIM_STBY	(1 << 4)
-#define MC13783_REGCTRL_VESIM_MODE	(1 << 5)
-#define MC13783_REGCTRL_VCAM_EN		(1 << 6)
-#define MC13783_REGCTRL_VCAM_STBY	(1 << 7)
-#define MC13783_REGCTRL_VCAM_MODE	(1 << 8)
-#define	MC13783_REGCTRL_VRFBG_EN	(1 << 9)
-#define MC13783_REGCTRL_VRFBG_STBY	(1 << 10)
-#define MC13783_REGCTRL_VVIB_EN		(1 << 11)
-#define MC13783_REGCTRL_VRF1_EN		(1 << 12)
-#define MC13783_REGCTRL_VRF1_STBY	(1 << 13)
-#define MC13783_REGCTRL_VRF1_MODE	(1 << 14)
-#define MC13783_REGCTRL_VRF2_EN		(1 << 15)
-#define MC13783_REGCTRL_VRF2_STBY	(1 << 16)
-#define MC13783_REGCTRL_VRF2_MODE	(1 << 17)
-#define MC13783_REGCTRL_VMMC1_EN	(1 << 18)
-#define MC13783_REGCTRL_VMMC1_STBY	(1 << 19)
-#define MC13783_REGCTRL_VMMC1_MODE	(1 << 20)
-#define MC13783_REGCTRL_VMMC2_EN	(1 << 21)
-#define MC13783_REGCTRL_VMMC2_STBY	(1 << 22)
-#define MC13783_REGCTRL_VMMC2_MODE	(1 << 23)
-
-/*
- * Reg Regulator Misc.
- */
-#define MC13783_REGCTRL_GPO1_EN		(1 << 6)
-#define MC13783_REGCTRL_GPO2_EN		(1 << 8)
-#define MC13783_REGCTRL_GPO3_EN		(1 << 10)
-#define MC13783_REGCTRL_GPO4_EN		(1 << 12)
-#define MC13783_REGCTRL_VIBPINCTRL	(1 << 14)
-
-/*
- * Reg Switcher 4
- */
-#define MC13783_SWCTRL_SW1A_MODE	(1 << 0)
-#define MC13783_SWCTRL_SW1A_STBY_MODE	(1 << 2)
-#define MC13783_SWCTRL_SW1A_DVS_SPEED	(1 << 6)
-#define MC13783_SWCTRL_SW1A_PANIC_MODE	(1 << 8)
-#define MC13783_SWCTRL_SW1A_SOFTSTART	(1 << 9)
-#define MC13783_SWCTRL_SW1B_MODE	(1 << 10)
-#define MC13783_SWCTRL_SW1B_STBY_MODE	(1 << 12)
-#define MC13783_SWCTRL_SW1B_DVS_SPEED	(1 << 14)
-#define MC13783_SWCTRL_SW1B_PANIC_MODE	(1 << 16)
-#define MC13783_SWCTRL_SW1B_SOFTSTART	(1 << 17)
-#define MC13783_SWCTRL_PLL_EN		(1 << 18)
-#define MC13783_SWCTRL_PLL_FACTOR	(1 << 19)
-
-/*
- * Reg Switcher 5
- */
-#define MC13783_SWCTRL_SW2A_MODE	(1 << 0)
-#define MC13783_SWCTRL_SW2A_STBY_MODE	(1 << 2)
-#define MC13783_SWCTRL_SW2A_DVS_SPEED	(1 << 6)
-#define MC13783_SWCTRL_SW2A_PANIC_MODE	(1 << 8)
-#define MC13783_SWCTRL_SW2A_SOFTSTART	(1 << 9)
-#define MC13783_SWCTRL_SW2B_MODE	(1 << 10)
-#define MC13783_SWCTRL_SW2B_STBY_MODE	(1 << 12)
-#define MC13783_SWCTRL_SW2B_DVS_SPEED	(1 << 14)
-#define MC13783_SWCTRL_SW2B_PANIC_MODE	(1 << 16)
-#define MC13783_SWCTRL_SW2B_SOFTSTART	(1 << 17)
-#define MC13783_SWSET_SW3		(1 << 18)
-#define MC13783_SWCTRL_SW3_EN		(1 << 20)
-#define MC13783_SWCTRL_SW3_STBY		(1 << 21)
-#define MC13783_SWCTRL_SW3_MODE		(1 << 22)
-
-static inline int mc13783_set_bits(struct mc13783 *mc13783, unsigned int offset,
-		u32 mask, u32 val)
-{
-	int ret;
-	mc13783_lock(mc13783);
-	ret = mc13783_reg_rmw(mc13783, offset, mask, val);
-	mc13783_unlock(mc13783);
-
-	return ret;
-}
-
-#endif /* __LINUX_MFD_MC13783_PRIV_H */
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
index 4a894f688549..b4c741e352c2 100644
--- a/include/linux/mfd/mc13783.h
+++ b/include/linux/mfd/mc13783.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Pengutronix
+ * Copyright 2009-2010 Pengutronix
  * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify it under
@@ -9,46 +9,83 @@
 #ifndef __LINUX_MFD_MC13783_H
 #define __LINUX_MFD_MC13783_H
 
-#include <linux/interrupt.h>
+#include <linux/mfd/mc13xxx.h>
 
 struct mc13783;
 
-void mc13783_lock(struct mc13783 *mc13783);
-void mc13783_unlock(struct mc13783 *mc13783);
+struct mc13xxx *mc13783_to_mc13xxx(struct mc13783 *mc13783);
 
-int mc13783_reg_read(struct mc13783 *mc13783, unsigned int offset, u32 *val);
-int mc13783_reg_write(struct mc13783 *mc13783, unsigned int offset, u32 val);
-int mc13783_reg_rmw(struct mc13783 *mc13783, unsigned int offset,
-		u32 mask, u32 val);
+static inline void mc13783_lock(struct mc13783 *mc13783)
+{
+	mc13xxx_lock(mc13783_to_mc13xxx(mc13783));
+}
+
+static inline void mc13783_unlock(struct mc13783 *mc13783)
+{
+	mc13xxx_unlock(mc13783_to_mc13xxx(mc13783));
+}
+
+static inline int mc13783_reg_read(struct mc13783 *mc13783,
+		unsigned int offset, u32 *val)
+{
+	return mc13xxx_reg_read(mc13783_to_mc13xxx(mc13783), offset, val);
+}
 
-int mc13783_irq_request(struct mc13783 *mc13783, int irq,
-		irq_handler_t handler, const char *name, void *dev);
-int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq,
-		irq_handler_t handler, const char *name, void *dev);
-int mc13783_irq_free(struct mc13783 *mc13783, int irq, void *dev);
+static inline int mc13783_reg_write(struct mc13783 *mc13783,
+		unsigned int offset, u32 val)
+{
+	return mc13xxx_reg_write(mc13783_to_mc13xxx(mc13783), offset, val);
+}
 
-int mc13783_irq_mask(struct mc13783 *mc13783, int irq);
-int mc13783_irq_unmask(struct mc13783 *mc13783, int irq);
-int mc13783_irq_status(struct mc13783 *mc13783, int irq,
-		int *enabled, int *pending);
-int mc13783_irq_ack(struct mc13783 *mc13783, int irq);
+static inline int mc13783_reg_rmw(struct mc13783 *mc13783,
+		unsigned int offset, u32 mask, u32 val)
+{
+	return mc13xxx_reg_rmw(mc13783_to_mc13xxx(mc13783), offset, mask, val);
+}
 
-static inline int mc13783_mask(struct mc13783 *mc13783, int irq) __deprecated;
-static inline int mc13783_mask(struct mc13783 *mc13783, int irq)
+static inline int mc13783_get_flags(struct mc13783 *mc13783)
 {
-	return mc13783_irq_mask(mc13783, irq);
+	return mc13xxx_get_flags(mc13783_to_mc13xxx(mc13783));
 }
 
-static inline int mc13783_unmask(struct mc13783 *mc13783, int irq) __deprecated;
-static inline int mc13783_unmask(struct mc13783 *mc13783, int irq)
+static inline int mc13783_irq_request(struct mc13783 *mc13783, int irq,
+		irq_handler_t handler, const char *name, void *dev)
 {
-	return mc13783_irq_unmask(mc13783, irq);
+	return mc13xxx_irq_request(mc13783_to_mc13xxx(mc13783), irq,
+			handler, name, dev);
 }
 
-static inline int mc13783_ackirq(struct mc13783 *mc13783, int irq) __deprecated;
-static inline int mc13783_ackirq(struct mc13783 *mc13783, int irq)
+static inline int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq,
+		irq_handler_t handler, const char *name, void *dev)
 {
-	return mc13783_irq_ack(mc13783, irq);
+	return mc13xxx_irq_request_nounmask(mc13783_to_mc13xxx(mc13783), irq,
+			handler, name, dev);
+}
+
+static inline int mc13783_irq_free(struct mc13783 *mc13783, int irq, void *dev)
+{
+	return mc13xxx_irq_free(mc13783_to_mc13xxx(mc13783), irq, dev);
+}
+
+static inline int mc13783_irq_mask(struct mc13783 *mc13783, int irq)
+{
+	return mc13xxx_irq_mask(mc13783_to_mc13xxx(mc13783), irq);
+}
+
+static inline int mc13783_irq_unmask(struct mc13783 *mc13783, int irq)
+{
+	return mc13xxx_irq_unmask(mc13783_to_mc13xxx(mc13783), irq);
+}
+static inline int mc13783_irq_status(struct mc13783 *mc13783, int irq,
+		int *enabled, int *pending)
+{
+	return mc13xxx_irq_status(mc13783_to_mc13xxx(mc13783),
+			irq, enabled, pending);
+}
+
+static inline int mc13783_irq_ack(struct mc13783 *mc13783, int irq)
+{
+	return mc13xxx_irq_ack(mc13783_to_mc13xxx(mc13783), irq);
 }
 
 #define MC13783_ADC0		43
@@ -64,96 +101,18 @@ static inline int mc13783_ackirq(struct mc13783 *mc13783, int irq)
 					MC13783_ADC0_TSMOD1 | \
 					MC13783_ADC0_TSMOD2)
 
-struct mc13783_led_platform_data {
-#define MC13783_LED_MD		0
-#define MC13783_LED_AD		1
-#define MC13783_LED_KP		2
-#define MC13783_LED_R1		3
-#define MC13783_LED_G1		4
-#define MC13783_LED_B1		5
-#define MC13783_LED_R2		6
-#define MC13783_LED_G2		7
-#define MC13783_LED_B2		8
-#define MC13783_LED_R3		9
-#define MC13783_LED_G3		10
-#define MC13783_LED_B3		11
-#define MC13783_LED_MAX MC13783_LED_B3
-	int id;
-	const char *name;
-	const char *default_trigger;
-
-/* Three or two bits current selection depending on the led */
-	char max_current;
-};
-
-struct mc13783_leds_platform_data {
-	int num_leds;
-	struct mc13783_led_platform_data *led;
-
-#define MC13783_LED_TRIODE_MD	(1 << 0)
-#define MC13783_LED_TRIODE_AD	(1 << 1)
-#define MC13783_LED_TRIODE_KP	(1 << 2)
-#define MC13783_LED_BOOST_EN	(1 << 3)
-#define MC13783_LED_TC1HALF	(1 << 4)
-#define MC13783_LED_SLEWLIMTC	(1 << 5)
-#define MC13783_LED_SLEWLIMBL	(1 << 6)
-#define MC13783_LED_TRIODE_TC1	(1 << 7)
-#define MC13783_LED_TRIODE_TC2	(1 << 8)
-#define MC13783_LED_TRIODE_TC3	(1 << 9)
-	int flags;
-
-#define MC13783_LED_AB_DISABLED		0
-#define MC13783_LED_AB_MD1		1
-#define MC13783_LED_AB_MD12		2
-#define MC13783_LED_AB_MD123		3
-#define MC13783_LED_AB_MD1234		4
-#define MC13783_LED_AB_MD1234_AD1	5
-#define MC13783_LED_AB_MD1234_AD12	6
-#define MC13783_LED_AB_MD1_AD		7
-	char abmode;
-
-#define MC13783_LED_ABREF_200MV	0
-#define MC13783_LED_ABREF_400MV	1
-#define MC13783_LED_ABREF_600MV	2
-#define MC13783_LED_ABREF_800MV	3
-	char abref;
-
-#define MC13783_LED_PERIOD_10MS		0
-#define MC13783_LED_PERIOD_100MS	1
-#define MC13783_LED_PERIOD_500MS	2
-#define MC13783_LED_PERIOD_2S		3
-	char bl_period;
-	char tc1_period;
-	char tc2_period;
-	char tc3_period;
-};
-
-/* to be cleaned up */
-struct regulator_init_data;
-
-struct mc13783_regulator_init_data {
-	int id;
-	struct regulator_init_data *init_data;
-};
-
-struct mc13783_regulator_platform_data {
-	int num_regulators;
-	struct mc13783_regulator_init_data *regulators;
-};
-
-struct mc13783_platform_data {
-	int num_regulators;
-	struct mc13783_regulator_init_data *regulators;
-	struct mc13783_leds_platform_data *leds;
-
-#define MC13783_USE_TOUCHSCREEN (1 << 0)
-#define MC13783_USE_CODEC	(1 << 1)
-#define MC13783_USE_ADC		(1 << 2)
-#define MC13783_USE_RTC		(1 << 3)
-#define MC13783_USE_REGULATOR	(1 << 4)
-#define MC13783_USE_LED		(1 << 5)
-	unsigned int flags;
-};
+#define mc13783_regulator_init_data mc13xxx_regulator_init_data
+#define mc13783_regulator_platform_data mc13xxx_regulator_platform_data
+#define mc13783_led_platform_data mc13xxx_led_platform_data
+#define mc13783_leds_platform_data mc13xxx_leds_platform_data
+
+#define mc13783_platform_data mc13xxx_platform_data
+#define MC13783_USE_TOUCHSCREEN	MC13XXX_USE_TOUCHSCREEN
+#define MC13783_USE_CODEC	MC13XXX_USE_CODEC
+#define MC13783_USE_ADC		MC13XXX_USE_ADC
+#define MC13783_USE_RTC		MC13XXX_USE_RTC
+#define MC13783_USE_REGULATOR	MC13XXX_USE_REGULATOR
+#define MC13783_USE_LED		MC13XXX_USE_LED
 
 #define MC13783_ADC_MODE_TS		1
 #define MC13783_ADC_MODE_SINGLE_CHAN	2
@@ -197,46 +156,46 @@ int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
 #define	MC13783_REGU_PWGT1SPI	31
 #define	MC13783_REGU_PWGT2SPI	32
 
-#define MC13783_IRQ_ADCDONE	0
-#define MC13783_IRQ_ADCBISDONE	1
-#define MC13783_IRQ_TS		2
+#define MC13783_IRQ_ADCDONE	MC13XXX_IRQ_ADCDONE
+#define MC13783_IRQ_ADCBISDONE	MC13XXX_IRQ_ADCBISDONE
+#define MC13783_IRQ_TS		MC13XXX_IRQ_TS
 #define MC13783_IRQ_WHIGH	3
 #define MC13783_IRQ_WLOW	4
-#define MC13783_IRQ_CHGDET	6
+#define MC13783_IRQ_CHGDET	MC13XXX_IRQ_CHGDET
 #define MC13783_IRQ_CHGOV	7
-#define MC13783_IRQ_CHGREV	8
-#define MC13783_IRQ_CHGSHORT	9
-#define MC13783_IRQ_CCCV	10
-#define MC13783_IRQ_CHGCURR	11
-#define MC13783_IRQ_BPON	12
-#define MC13783_IRQ_LOBATL	13
-#define MC13783_IRQ_LOBATH	14
+#define MC13783_IRQ_CHGREV	MC13XXX_IRQ_CHGREV
+#define MC13783_IRQ_CHGSHORT	MC13XXX_IRQ_CHGSHORT
+#define MC13783_IRQ_CCCV	MC13XXX_IRQ_CCCV
+#define MC13783_IRQ_CHGCURR	MC13XXX_IRQ_CHGCURR
+#define MC13783_IRQ_BPON	MC13XXX_IRQ_BPON
+#define MC13783_IRQ_LOBATL	MC13XXX_IRQ_LOBATL
+#define MC13783_IRQ_LOBATH	MC13XXX_IRQ_LOBATH
 #define MC13783_IRQ_UDP		15
 #define MC13783_IRQ_USB		16
 #define MC13783_IRQ_ID		19
 #define MC13783_IRQ_SE1		21
 #define MC13783_IRQ_CKDET	22
 #define MC13783_IRQ_UDM		23
-#define MC13783_IRQ_1HZ		24
-#define MC13783_IRQ_TODA	25
+#define MC13783_IRQ_1HZ		MC13XXX_IRQ_1HZ
+#define MC13783_IRQ_TODA	MC13XXX_IRQ_TODA
 #define MC13783_IRQ_ONOFD1	27
 #define MC13783_IRQ_ONOFD2	28
 #define MC13783_IRQ_ONOFD3	29
-#define MC13783_IRQ_SYSRST	30
-#define MC13783_IRQ_RTCRST	31
-#define MC13783_IRQ_PC		32
-#define MC13783_IRQ_WARM	33
-#define MC13783_IRQ_MEMHLD	34
+#define MC13783_IRQ_SYSRST	MC13XXX_IRQ_SYSRST
+#define MC13783_IRQ_RTCRST	MC13XXX_IRQ_RTCRST
+#define MC13783_IRQ_PC		MC13XXX_IRQ_PC
+#define MC13783_IRQ_WARM	MC13XXX_IRQ_WARM
+#define MC13783_IRQ_MEMHLD	MC13XXX_IRQ_MEMHLD
 #define MC13783_IRQ_PWRRDY	35
-#define MC13783_IRQ_THWARNL	36
-#define MC13783_IRQ_THWARNH	37
-#define MC13783_IRQ_CLK		38
+#define MC13783_IRQ_THWARNL	MC13XXX_IRQ_THWARNL
+#define MC13783_IRQ_THWARNH	MC13XXX_IRQ_THWARNH
+#define MC13783_IRQ_CLK		MC13XXX_IRQ_CLK
 #define MC13783_IRQ_SEMAF	39
 #define MC13783_IRQ_MC2B	41
 #define MC13783_IRQ_HSDET	42
 #define MC13783_IRQ_HSL		43
 #define MC13783_IRQ_ALSPTH	44
 #define MC13783_IRQ_AHSSHORT	45
-#define MC13783_NUM_IRQ		46
+#define MC13783_NUM_IRQ		MC13XXX_NUM_IRQ
 
-#endif /* __LINUX_MFD_MC13783_H */
+#endif /* ifndef __LINUX_MFD_MC13783_H */
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
new file mode 100644
index 000000000000..a1d391b40e68
--- /dev/null
+++ b/include/linux/mfd/mc13xxx.h
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#ifndef __LINUX_MFD_MC13XXX_H
+#define __LINUX_MFD_MC13XXX_H
+
+#include <linux/interrupt.h>
+
+struct mc13xxx;
+
+void mc13xxx_lock(struct mc13xxx *mc13xxx);
+void mc13xxx_unlock(struct mc13xxx *mc13xxx);
+
+int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val);
+int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val);
+int mc13xxx_reg_rmw(struct mc13xxx *mc13xxx, unsigned int offset,
+		u32 mask, u32 val);
+
+int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
+
+int mc13xxx_irq_request(struct mc13xxx *mc13xxx, int irq,
+		irq_handler_t handler, const char *name, void *dev);
+int mc13xxx_irq_request_nounmask(struct mc13xxx *mc13xxx, int irq,
+		irq_handler_t handler, const char *name, void *dev);
+int mc13xxx_irq_free(struct mc13xxx *mc13xxx, int irq, void *dev);
+
+int mc13xxx_irq_mask(struct mc13xxx *mc13xxx, int irq);
+int mc13xxx_irq_unmask(struct mc13xxx *mc13xxx, int irq);
+int mc13xxx_irq_status(struct mc13xxx *mc13xxx, int irq,
+		int *enabled, int *pending);
+int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq);
+
+int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
+
+#define MC13XXX_IRQ_ADCDONE	0
+#define MC13XXX_IRQ_ADCBISDONE	1
+#define MC13XXX_IRQ_TS		2
+#define MC13XXX_IRQ_CHGDET	6
+#define MC13XXX_IRQ_CHGREV	8
+#define MC13XXX_IRQ_CHGSHORT	9
+#define MC13XXX_IRQ_CCCV	10
+#define MC13XXX_IRQ_CHGCURR	11
+#define MC13XXX_IRQ_BPON	12
+#define MC13XXX_IRQ_LOBATL	13
+#define MC13XXX_IRQ_LOBATH	14
+#define MC13XXX_IRQ_1HZ		24
+#define MC13XXX_IRQ_TODA	25
+#define MC13XXX_IRQ_SYSRST	30
+#define MC13XXX_IRQ_RTCRST	31
+#define MC13XXX_IRQ_PC		32
+#define MC13XXX_IRQ_WARM	33
+#define MC13XXX_IRQ_MEMHLD	34
+#define MC13XXX_IRQ_THWARNL	36
+#define MC13XXX_IRQ_THWARNH	37
+#define MC13XXX_IRQ_CLK		38
+
+#define MC13XXX_NUM_IRQ		46
+
+struct regulator_init_data;
+
+struct mc13xxx_regulator_init_data {
+	int id;
+	struct regulator_init_data *init_data;
+};
+
+struct mc13xxx_regulator_platform_data {
+	int num_regulators;
+	struct mc13xxx_regulator_init_data *regulators;
+};
+
+struct mc13xxx_led_platform_data {
+#define MC13783_LED_MD		0
+#define MC13783_LED_AD		1
+#define MC13783_LED_KP		2
+#define MC13783_LED_R1		3
+#define MC13783_LED_G1		4
+#define MC13783_LED_B1		5
+#define MC13783_LED_R2		6
+#define MC13783_LED_G2		7
+#define MC13783_LED_B2		8
+#define MC13783_LED_R3		9
+#define MC13783_LED_G3		10
+#define MC13783_LED_B3		11
+#define MC13783_LED_MAX MC13783_LED_B3
+	int id;
+	const char *name;
+	const char *default_trigger;
+
+/* Three or two bits current selection depending on the led */
+	char max_current;
+};
+
+struct mc13xxx_leds_platform_data {
+	int num_leds;
+	struct mc13xxx_led_platform_data *led;
+
+#define MC13783_LED_TRIODE_MD	(1 << 0)
+#define MC13783_LED_TRIODE_AD	(1 << 1)
+#define MC13783_LED_TRIODE_KP	(1 << 2)
+#define MC13783_LED_BOOST_EN	(1 << 3)
+#define MC13783_LED_TC1HALF	(1 << 4)
+#define MC13783_LED_SLEWLIMTC	(1 << 5)
+#define MC13783_LED_SLEWLIMBL	(1 << 6)
+#define MC13783_LED_TRIODE_TC1	(1 << 7)
+#define MC13783_LED_TRIODE_TC2	(1 << 8)
+#define MC13783_LED_TRIODE_TC3	(1 << 9)
+	int flags;
+
+#define MC13783_LED_AB_DISABLED		0
+#define MC13783_LED_AB_MD1		1
+#define MC13783_LED_AB_MD12		2
+#define MC13783_LED_AB_MD123		3
+#define MC13783_LED_AB_MD1234		4
+#define MC13783_LED_AB_MD1234_AD1	5
+#define MC13783_LED_AB_MD1234_AD12	6
+#define MC13783_LED_AB_MD1_AD		7
+	char abmode;
+
+#define MC13783_LED_ABREF_200MV	0
+#define MC13783_LED_ABREF_400MV	1
+#define MC13783_LED_ABREF_600MV	2
+#define MC13783_LED_ABREF_800MV	3
+	char abref;
+
+#define MC13783_LED_PERIOD_10MS		0
+#define MC13783_LED_PERIOD_100MS	1
+#define MC13783_LED_PERIOD_500MS	2
+#define MC13783_LED_PERIOD_2S		3
+	char bl_period;
+	char tc1_period;
+	char tc2_period;
+	char tc3_period;
+};
+
+struct mc13xxx_platform_data {
+#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
+#define MC13XXX_USE_CODEC	(1 << 1)
+#define MC13XXX_USE_ADC		(1 << 2)
+#define MC13XXX_USE_RTC		(1 << 3)
+#define MC13XXX_USE_REGULATOR	(1 << 4)
+#define MC13XXX_USE_LED		(1 << 5)
+	unsigned int flags;
+
+	int num_regulators;
+	struct mc13xxx_regulator_init_data *regulators;
+	struct mc13xxx_leds_platform_data *leds;
+};
+
+#endif /* ifndef __LINUX_MFD_MC13XXX_H */
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index ad411a78870c..50d4a047118d 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -227,4 +227,11 @@ static inline struct pcf50633 *dev_to_pcf50633(struct device *dev)
 	return dev_get_drvdata(dev);
 }
 
+int pcf50633_irq_init(struct pcf50633 *pcf, int irq);
+void pcf50633_irq_free(struct pcf50633 *pcf);
+#ifdef CONFIG_PM
+int pcf50633_irq_suspend(struct pcf50633 *pcf);
+int pcf50633_irq_resume(struct pcf50633 *pcf);
+#endif
+
 #endif
diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h
index 49067802a6d7..c981b959760f 100644
--- a/include/linux/mfd/sh_mobile_sdhi.h
+++ b/include/linux/mfd/sh_mobile_sdhi.h
@@ -7,8 +7,10 @@ struct sh_mobile_sdhi_info {
 	int dma_slave_tx;
 	int dma_slave_rx;
 	unsigned long tmio_flags;
+	unsigned long tmio_caps;
 	u32 tmio_ocr_mask;	/* available MMC voltages */
 	void (*set_pwr)(struct platform_device *pdev, int state);
+	int (*get_cd)(struct platform_device *pdev);
 };
 
 #endif /* __SH_MOBILE_SDHI_H__ */
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
new file mode 100644
index 000000000000..e762c270d8d4
--- /dev/null
+++ b/include/linux/mfd/stmpe.h
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#ifndef __LINUX_MFD_STMPE_H
+#define __LINUX_MFD_STMPE_H
+
+#include <linux/device.h>
+
+enum stmpe_block {
+	STMPE_BLOCK_GPIO	= 1 << 0,
+	STMPE_BLOCK_KEYPAD	= 1 << 1,
+	STMPE_BLOCK_TOUCHSCREEN	= 1 << 2,
+	STMPE_BLOCK_ADC		= 1 << 3,
+	STMPE_BLOCK_PWM		= 1 << 4,
+	STMPE_BLOCK_ROTATOR	= 1 << 5,
+};
+
+enum stmpe_partnum {
+	STMPE811,
+	STMPE1601,
+	STMPE2401,
+	STMPE2403,
+};
+
+/*
+ * For registers whose locations differ on variants,  the correct address is
+ * obtained by indexing stmpe->regs with one of the following.
+ */
+enum {
+	STMPE_IDX_CHIP_ID,
+	STMPE_IDX_ICR_LSB,
+	STMPE_IDX_IER_LSB,
+	STMPE_IDX_ISR_MSB,
+	STMPE_IDX_GPMR_LSB,
+	STMPE_IDX_GPSR_LSB,
+	STMPE_IDX_GPCR_LSB,
+	STMPE_IDX_GPDR_LSB,
+	STMPE_IDX_GPEDR_MSB,
+	STMPE_IDX_GPRER_LSB,
+	STMPE_IDX_GPFER_LSB,
+	STMPE_IDX_GPAFR_U_MSB,
+	STMPE_IDX_IEGPIOR_LSB,
+	STMPE_IDX_ISGPIOR_MSB,
+	STMPE_IDX_MAX,
+};
+
+
+struct stmpe_variant_info;
+
+/**
+ * struct stmpe - STMPE MFD structure
+ * @lock: lock protecting I/O operations
+ * @irq_lock: IRQ bus lock
+ * @dev: device, mostly for dev_dbg()
+ * @i2c: i2c client
+ * @variant: the detected STMPE model number
+ * @regs: list of addresses of registers which are at different addresses on
+ *	  different variants.  Indexed by one of STMPE_IDX_*.
+ * @irq_base: starting IRQ number for internal IRQs
+ * @num_gpios: number of gpios, differs for variants
+ * @ier: cache of IER registers for bus_lock
+ * @oldier: cache of IER registers for bus_lock
+ * @pdata: platform data
+ */
+struct stmpe {
+	struct mutex lock;
+	struct mutex irq_lock;
+	struct device *dev;
+	struct i2c_client *i2c;
+	enum stmpe_partnum partnum;
+	struct stmpe_variant_info *variant;
+	const u8 *regs;
+
+	int irq_base;
+	int num_gpios;
+	u8 ier[2];
+	u8 oldier[2];
+	struct stmpe_platform_data *pdata;
+};
+
+extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
+extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
+extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
+			    u8 *values);
+extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+			     const u8 *values);
+extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
+extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
+			     enum stmpe_block block);
+extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
+extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
+
+struct matrix_keymap_data;
+
+/**
+ * struct stmpe_keypad_platform_data - STMPE keypad platform data
+ * @keymap_data: key map table and size
+ * @debounce_ms: debounce interval, in ms.  Maximum is
+ *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ */
+struct stmpe_keypad_platform_data {
+	struct matrix_keymap_data *keymap_data;
+	unsigned int debounce_ms;
+	unsigned int scan_count;
+	bool no_autorepeat;
+};
+
+#define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
+
+/**
+ * struct stmpe_gpio_platform_data - STMPE GPIO platform data
+ * @gpio_base: first gpio number assigned.  A maximum of
+ *	       %STMPE_NR_GPIOS GPIOs will be allocated.
+ * @norequest_mask: bitmask specifying which GPIOs should _not_ be
+ *		    requestable due to different usage (e.g. touch, keypad)
+ *		    STMPE_GPIO_NOREQ_* macros can be used here.
+ */
+struct stmpe_gpio_platform_data {
+	int gpio_base;
+	unsigned norequest_mask;
+	void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
+	void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
+};
+
+/**
+ * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
+ * data
+ * @sample_time: ADC converstion time in number of clock.
+ * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
+ * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
+ * recommended is 4.
+ * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+ * @ref_sel: ADC reference source
+ * (0 -> internal reference, 1 -> external reference)
+ * @adc_freq: ADC Clock speed
+ * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+ * @ave_ctrl: Sample average control
+ * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
+ * @touch_det_delay: Touch detect interrupt delay
+ * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
+ * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
+ * recommended is 3
+ * @settling: Panel driver settling time
+ * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
+ * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
+ * recommended is 2
+ * @fraction_z: Length of the fractional part in z
+ * (fraction_z ([0..7]) = Count of the fractional part)
+ * recommended is 7
+ * @i_drive: current limit value of the touchscreen drivers
+ * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
+ *
+ * */
+struct stmpe_ts_platform_data {
+       u8 sample_time;
+       u8 mod_12b;
+       u8 ref_sel;
+       u8 adc_freq;
+       u8 ave_ctrl;
+       u8 touch_det_delay;
+       u8 settling;
+       u8 fraction_z;
+       u8 i_drive;
+};
+
+/**
+ * struct stmpe_platform_data - STMPE platform data
+ * @id: device id to distinguish between multiple STMPEs on the same board
+ * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
+ * @irq_trigger: IRQ trigger to use for the interrupt to the host
+ * @irq_invert_polarity: IRQ line is connected with reversed polarity
+ * @autosleep: bool to enable/disable stmpe autosleep
+ * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
+ * @irq_base: base IRQ number.  %STMPE_NR_IRQS irqs will be used, or
+ *	      %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
+ * @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
+ * @ts: touchscreen-specific platform data
+ */
+struct stmpe_platform_data {
+	int id;
+	unsigned int blocks;
+	int irq_base;
+	unsigned int irq_trigger;
+	bool irq_invert_polarity;
+	bool autosleep;
+	int autosleep_timeout;
+
+	struct stmpe_gpio_platform_data *gpio;
+	struct stmpe_keypad_platform_data *keypad;
+	struct stmpe_ts_platform_data *ts;
+};
+
+#define STMPE_NR_INTERNAL_IRQS	9
+#define STMPE_INT_GPIO(x)	(STMPE_NR_INTERNAL_IRQS + (x))
+
+#define STMPE_NR_GPIOS		24
+#define STMPE_NR_IRQS		STMPE_INT_GPIO(STMPE_NR_GPIOS)
+
+#endif
diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h
index e47f770d3068..eff3094ca84e 100644
--- a/include/linux/mfd/tc35892.h
+++ b/include/linux/mfd/tc35892.h
@@ -111,9 +111,13 @@ extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val);
  * struct tc35892_gpio_platform_data - TC35892 GPIO platform data
  * @gpio_base: first gpio number assigned to TC35892.  A maximum of
  *	       %TC35892_NR_GPIOS GPIOs will be allocated.
+ * @setup: callback for board-specific initialization
+ * @remove: callback for board-specific teardown
  */
 struct tc35892_gpio_platform_data {
 	int gpio_base;
+	void (*setup)(struct tc35892 *tc35892, unsigned gpio_base);
+	void (*remove)(struct tc35892 *tc35892, unsigned gpio_base);
 };
 
 /**
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index f07425bc3dcd..085f041197dc 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -52,6 +52,11 @@
 
 /* tmio MMC platform flags */
 #define TMIO_MMC_WRPROTECT_DISABLE	(1 << 0)
+/*
+ * Some controllers can support a 2-byte block size when the bus width
+ * is configured in 4-bit mode.
+ */
+#define TMIO_MMC_BLKSZ_2BYTES		(1 << 1)
 
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
 int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
@@ -74,6 +79,7 @@ struct tmio_mmc_data {
 	struct tmio_mmc_dma		*dma;
 	void (*set_pwr)(struct platform_device *host, int state);
 	void (*set_clk_div)(struct platform_device *host, int state);
+	int (*get_cd)(struct platform_device *host);
 };
 
 /*
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
new file mode 100644
index 000000000000..b6bab1b04e25
--- /dev/null
+++ b/include/linux/mfd/tps6586x.h
@@ -0,0 +1,78 @@
+#ifndef __LINUX_MFD_TPS6586X_H
+#define __LINUX_MFD_TPS6586X_H
+
+enum {
+	TPS6586X_ID_SM_0,
+	TPS6586X_ID_SM_1,
+	TPS6586X_ID_SM_2,
+	TPS6586X_ID_LDO_0,
+	TPS6586X_ID_LDO_1,
+	TPS6586X_ID_LDO_2,
+	TPS6586X_ID_LDO_3,
+	TPS6586X_ID_LDO_4,
+	TPS6586X_ID_LDO_5,
+	TPS6586X_ID_LDO_6,
+	TPS6586X_ID_LDO_7,
+	TPS6586X_ID_LDO_8,
+	TPS6586X_ID_LDO_9,
+	TPS6586X_ID_LDO_RTC,
+};
+
+enum {
+	TPS6586X_INT_PLDO_0,
+	TPS6586X_INT_PLDO_1,
+	TPS6586X_INT_PLDO_2,
+	TPS6586X_INT_PLDO_3,
+	TPS6586X_INT_PLDO_4,
+	TPS6586X_INT_PLDO_5,
+	TPS6586X_INT_PLDO_6,
+	TPS6586X_INT_PLDO_7,
+	TPS6586X_INT_COMP_DET,
+	TPS6586X_INT_ADC,
+	TPS6586X_INT_PLDO_8,
+	TPS6586X_INT_PLDO_9,
+	TPS6586X_INT_PSM_0,
+	TPS6586X_INT_PSM_1,
+	TPS6586X_INT_PSM_2,
+	TPS6586X_INT_PSM_3,
+	TPS6586X_INT_RTC_ALM1,
+	TPS6586X_INT_ACUSB_OVP,
+	TPS6586X_INT_USB_DET,
+	TPS6586X_INT_AC_DET,
+	TPS6586X_INT_BAT_DET,
+	TPS6586X_INT_CHG_STAT,
+	TPS6586X_INT_CHG_TEMP,
+	TPS6586X_INT_PP,
+	TPS6586X_INT_RESUME,
+	TPS6586X_INT_LOW_SYS,
+	TPS6586X_INT_RTC_ALM2,
+};
+
+struct tps6586x_subdev_info {
+	int		id;
+	const char	*name;
+	void		*platform_data;
+};
+
+struct tps6586x_platform_data {
+	int num_subdevs;
+	struct tps6586x_subdev_info *subdevs;
+
+	int gpio_base;
+	int irq_base;
+};
+
+/*
+ * NOTE: the functions below are not intended for use outside
+ * of the TPS6586X sub-device drivers
+ */
+extern int tps6586x_write(struct device *dev, int reg, uint8_t val);
+extern int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val);
+extern int tps6586x_read(struct device *dev, int reg, uint8_t *val);
+extern int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val);
+extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int tps6586x_update(struct device *dev, int reg, uint8_t val,
+			   uint8_t mask);
+
+#endif /*__LINUX_MFD_TPS6586X_H */
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index eb5bd4e0e03c..a1239c48b41a 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -238,6 +238,15 @@ struct regulator_dev;
 
 #define WM831X_NUM_IRQ_REGS 5
 
+enum wm831x_parent {
+	WM8310 = 0x8310,
+	WM8311 = 0x8311,
+	WM8312 = 0x8312,
+	WM8320 = 0x8320,
+	WM8321 = 0x8321,
+	WM8325 = 0x8325,
+};
+
 struct wm831x {
 	struct mutex io_lock;
 
@@ -285,6 +294,9 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
 int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
 		     int count, u16 *buf);
 
+int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq);
+void wm831x_device_exit(struct wm831x *wm831x);
+int wm831x_device_suspend(struct wm831x *wm831x);
 int wm831x_irq_init(struct wm831x *wm831x, int irq);
 void wm831x_irq_exit(struct wm831x *wm831x);
 
diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h
index a95141eafce3..bd581c6fa085 100644
--- a/include/linux/mfd/wm8350/audio.h
+++ b/include/linux/mfd/wm8350/audio.h
@@ -522,9 +522,6 @@
 #define WM8350_MCLK_SEL_PLL_32K			3
 #define WM8350_MCLK_SEL_MCLK			5
 
-#define WM8350_MCLK_DIR_OUT			0
-#define WM8350_MCLK_DIR_IN			1
-
 /* clock divider id's */
 #define WM8350_ADC_CLKDIV			0
 #define WM8350_DAC_CLKDIV			1
diff --git a/include/linux/mfd/wm8994/gpio.h b/include/linux/mfd/wm8994/gpio.h
index b4d4c22991e8..0c79b5ff4b5a 100644
--- a/include/linux/mfd/wm8994/gpio.h
+++ b/include/linux/mfd/wm8994/gpio.h
@@ -36,6 +36,10 @@
 #define WM8994_GP_FN_WSEQ_STATUS    16
 #define WM8994_GP_FN_FIFO_ERROR     17
 #define WM8994_GP_FN_OPCLK          18
+#define WM8994_GP_FN_THW	    19
+#define WM8994_GP_FN_DCS_DONE	    20
+#define WM8994_GP_FN_FLL1_OUT       21
+#define WM8994_GP_FN_FLL2_OUT       22
 
 #define WM8994_GPN_DIR                          0x8000  /* GPN_DIR */
 #define WM8994_GPN_DIR_MASK                     0x8000  /* GPN_DIR */
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 5c51f367c061..add8a1b8bcf0 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -29,7 +29,7 @@ struct wm8994_ldo_pdata {
 #define WM8994_CONFIGURE_GPIO 0x8000
 
 #define WM8994_DRC_REGS 5
-#define WM8994_EQ_REGS  19
+#define WM8994_EQ_REGS  20
 
 /**
  * DRC configurations are specified with a label and a set of register