diff options
59 files changed, 213 insertions, 158 deletions
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 54d7d11bfed4..ff7a6f12cd00 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -124,7 +124,7 @@ properties: atomic mode of operation, even if requested. default: 0 - max-rx-timeout-ms: + arm,max-rx-timeout-ms: description: An optional time value, expressed in milliseconds, representing the transport maximum timeout value for the receive channel. The value should diff --git a/MAINTAINERS b/MAINTAINERS index bdae0faf000c..91d0609db61b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2852,7 +2852,7 @@ F: Documentation/devicetree/bindings/arm/qcom.yaml F: Documentation/devicetree/bindings/bus/qcom* F: Documentation/devicetree/bindings/cache/qcom,llcc.yaml F: Documentation/devicetree/bindings/firmware/qcom,scm.yaml -F: Documentation/devicetree/bindings/reserved-memory/qcom +F: Documentation/devicetree/bindings/reserved-memory/qcom* F: Documentation/devicetree/bindings/soc/qcom/ F: arch/arm/boot/dts/qcom/ F: arch/arm/configs/qcom_defconfig @@ -19846,12 +19846,10 @@ L: linux-riscv@lists.infradead.org S: Maintained Q: https://patchwork.kernel.org/project/linux-riscv/list/ T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ -F: Documentation/devicetree/bindings/riscv/ -F: arch/riscv/boot/dts/ -X: arch/riscv/boot/dts/allwinner/ -X: arch/riscv/boot/dts/renesas/ -X: arch/riscv/boot/dts/sophgo/ -X: arch/riscv/boot/dts/thead/ +F: arch/riscv/boot/dts/canaan/ +F: arch/riscv/boot/dts/microchip/ +F: arch/riscv/boot/dts/sifive/ +F: arch/riscv/boot/dts/starfive/ RISC-V PMU DRIVERS M: Atish Patra <atishp@atishpatra.org> diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts index e32c73d32f0a..2f84e2805712 100644 --- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts @@ -325,8 +325,8 @@ &i2c2 { status = "okay"; - rt5616: rt5616@1b { - compatible = "rt5616"; + rt5616: audio-codec@1b { + compatible = "realtek,rt5616"; reg = <0x1b>; clocks = <&cru SCLK_I2S_OUT>; clock-names = "mclk"; diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi index 96279d1e02fe..63b9912be06a 100644 --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi @@ -384,12 +384,13 @@ }; }; - acodec: acodec-ana@20030000 { - compatible = "rk3036-codec"; + acodec: audio-codec@20030000 { + compatible = "rockchip,rk3036-codec"; reg = <0x20030000 0x4000>; - rockchip,grf = <&grf>; clock-names = "acodec_pclk"; clocks = <&cru PCLK_ACODEC>; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -399,7 +400,6 @@ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI>; clock-names = "pclk"; - rockchip,grf = <&grf>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_ctl>; #sound-dai-cells = <0>; @@ -553,11 +553,11 @@ }; spi: spi@20074000 { - compatible = "rockchip,rockchip-spi"; + compatible = "rockchip,rk3036-spi"; reg = <0x20074000 0x1000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>; - clock-names = "apb-pclk","spi_pclk"; + clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; + clock-names = "spiclk", "apb_pclk"; dmas = <&pdma 8>, <&pdma 9>; dma-names = "tx", "rx"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi index d00036204a8c..dad0dc8fb431 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi @@ -14,7 +14,7 @@ lvds0_subsys: bus@56240000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x56243000 0x4>; #clock-cells = <1>; - clock-output-names = "mipi1_lis_lpcg_ipg_clk"; + clock-output-names = "lvds0_lis_lpcg_ipg_clk"; power-domains = <&pd IMX_SC_R_MIPI_1>; }; @@ -22,9 +22,9 @@ lvds0_subsys: bus@56240000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5624300c 0x4>; #clock-cells = <1>; - clock-output-names = "mipi1_pwm_lpcg_clk", - "mipi1_pwm_lpcg_ipg_clk", - "mipi1_pwm_lpcg_32k_clk"; + clock-output-names = "lvds0_pwm_lpcg_clk", + "lvds0_pwm_lpcg_ipg_clk", + "lvds0_pwm_lpcg_32k_clk"; power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>; }; @@ -32,8 +32,8 @@ lvds0_subsys: bus@56240000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x56243010 0x4>; #clock-cells = <1>; - clock-output-names = "mipi1_i2c0_lpcg_clk", - "mipi1_i2c0_lpcg_ipg_clk"; + clock-output-names = "lvds0_i2c0_lpcg_clk", + "lvds0_i2c0_lpcg_ipg_clk"; power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi index c6540768bdb9..87211c18d65a 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi @@ -15,7 +15,7 @@ vpu: vpu@2c000000 { mu_m0: mailbox@2d000000 { compatible = "fsl,imx6sx-mu"; reg = <0x2d000000 0x20000>; - interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <2>; power-domains = <&pd IMX_SC_R_VPU_MU_0>; status = "disabled"; @@ -24,7 +24,7 @@ vpu: vpu@2c000000 { mu1_m0: mailbox@2d020000 { compatible = "fsl,imx6sx-mu"; reg = <0x2d020000 0x20000>; - interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <2>; power-domains = <&pd IMX_SC_R_VPU_MU_1>; status = "disabled"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 50debe821c42..9c102acb8052 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -218,6 +218,18 @@ }; }; +&media_blk_ctrl { + /* + * The LVDS panel on this device uses 72.4 MHz pixel clock, + * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB + * serializer and LCDIFv3 scanout engine can reach accurate + * pixel clock of exactly 72.4 MHz. + */ + assigned-clock-rates = <500000000>, <200000000>, + <0>, <0>, <500000000>, + <506800000>; +}; + &snvs_pwrkey { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts index 3c2efdc59bfa..30962922b361 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts @@ -71,6 +71,7 @@ assigned-clock-rates = <500000000>, <200000000>, <0>, /* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */ <68900000>, + <500000000>, /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */ <964600000>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index f3531cfb0d79..40e847bc0b7f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1261,7 +1261,7 @@ compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_DUMMY>, + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, <&clk IMX8MP_CLK_NAND_USDHC_BUS>, <&clk IMX8MP_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; @@ -1275,7 +1275,7 @@ compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_DUMMY>, + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, <&clk IMX8MP_CLK_NAND_USDHC_BUS>, <&clk IMX8MP_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; @@ -1289,7 +1289,7 @@ compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MP_CLK_DUMMY>, + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, <&clk IMX8MP_CLK_NAND_USDHC_BUS>, <&clk IMX8MP_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi index 7894a3ab26d6..f81937b5fb72 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi @@ -5,6 +5,14 @@ * Author: Alexander Stein */ +&mu_m0 { + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mu1_m0 { + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; +}; + &vpu_core0 { reg = <0x2d040000 0x10000>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index e32d5afcf4a9..43f543768444 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -384,7 +384,7 @@ }; flexspi2: spi@29810000 { - compatible = "nxp,imx8mm-fspi"; + compatible = "nxp,imx8ulp-fspi"; reg = <0x29810000 0x10000>, <0x60000000 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 28634789a8a9..7af210789879 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -248,7 +248,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - mboxes = <&apcs1_mbox 0>; + qcom,ipc = <&apcs1_mbox 8 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 9bafb3b350ff..38cb524cc568 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1973,7 +1973,7 @@ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, - <&pcie1_phy>, + <&pcie1_phy QMP_PCIE_PIPE_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts index 941dfddd6713..fdde988ae01e 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts @@ -139,6 +139,8 @@ pinctrl-0 = <&nvme_reg_en>; pinctrl-names = "default"; + + regulator-boot-on; }; vph_pwr: regulator-vph-pwr { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts index 20616bd4aa6c..fb4a48a1e2a8 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -134,6 +134,8 @@ pinctrl-0 = <&nvme_reg_en>; pinctrl-names = "default"; + + regulator-boot-on; }; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index 10b28d870f08..c6e0356ed9a2 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -177,9 +177,9 @@ compatible = "qcom,x1e80100-sndcard"; model = "X1E80100-CRD"; audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", - "TwitterLeft IN", "WSA WSA_SPK2 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", "WooferRight IN", "WSA2 WSA_SPK2 OUT", - "TwitterRight IN", "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", "AMIC2", "MIC BIAS2", @@ -300,6 +300,8 @@ pinctrl-names = "default"; pinctrl-0 = <&nvme_reg_en>; + + regulator-boot-on; }; vreg_wwan: regulator-wwan { @@ -933,7 +935,7 @@ reg = <0 1>; reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; - sound-name-prefix = "TwitterLeft"; + sound-name-prefix = "TweeterLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; qcom,port-mapping = <4 5 6 7 11 13>; @@ -986,7 +988,7 @@ reg = <0 1>; reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; - sound-name-prefix = "TwitterRight"; + sound-name-prefix = "TweeterRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; qcom,port-mapping = <4 5 6 7 11 13>; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index 3c13331a9ef4..0cdaff9c8cf0 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -205,6 +205,8 @@ pinctrl-0 = <&nvme_reg_en>; pinctrl-names = "default"; + + regulator-boot-on; }; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi index 42e02ad6a9c3..cdb401767c42 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi @@ -164,6 +164,8 @@ pinctrl-0 = <&nvme_reg_en>; pinctrl-names = "default"; + + regulator-boot-on; }; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 1c3a6a7b3ed6..5ef030c60abe 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -253,6 +253,8 @@ pinctrl-names = "default"; pinctrl-0 = <&nvme_reg_en>; + + regulator-boot-on; }; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index a36076e3c56b..0510abc0edf0 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -2924,14 +2924,14 @@ "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>, - <0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>; - bus-range = <0 0xff>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>, + <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; dma-coherent; linux,pci-domain = <6>; - num-lanes = <2>; + num-lanes = <4>; interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, @@ -2997,19 +2997,22 @@ }; pcie6a_phy: phy@1bfc000 { - compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy"; - reg = <0 0x01bfc000 0 0x2000>; + compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy"; + reg = <0 0x01bfc000 0 0x2000>, + <0 0x01bfe000 0 0x2000>; clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>, <&gcc GCC_PCIE_6A_CFG_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>, + <&tcsr TCSR_PCIE_4L_CLKREF_EN>, <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_6A_PIPE_CLK>; + <&gcc GCC_PCIE_6A_PIPE_CLK>, + <&gcc GCC_PCIE_6A_PIPEDIV2_CLK>; clock-names = "aux", "cfg_ahb", "ref", "rchng", - "pipe"; + "pipe", + "pipediv2"; resets = <&gcc GCC_PCIE_6A_PHY_BCR>, <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>; @@ -3021,6 +3024,8 @@ power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>; + qcom,4ln-config-sel = <&tcsr 0x1a000 0>; + #clock-cells = <0>; clock-output-names = "pcie6a_pipe_clk"; @@ -3097,7 +3102,7 @@ assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>; assigned-clock-rates = <19200000>; - interconnects = <&pcie_south_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS + interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>; @@ -3124,14 +3129,16 @@ clocks = <&gcc GCC_PCIE_5_AUX_CLK>, <&gcc GCC_PCIE_5_CFG_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>, + <&tcsr TCSR_PCIE_2L_5_CLKREF_EN>, <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_5_PIPE_CLK>; + <&gcc GCC_PCIE_5_PIPE_CLK>, + <&gcc GCC_PCIE_5_PIPEDIV2_CLK>; clock-names = "aux", "cfg_ahb", "ref", "rchng", - "pipe"; + "pipe", + "pipediv2"; resets = <&gcc GCC_PCIE_5_PHY_BCR>; reset-names = "phy"; @@ -3166,8 +3173,8 @@ "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>, - <0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x7c200000 0x0 0x100000>, + <0x02000000 0x0 0x7c300000 0x0 0x7c300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; dma-coherent; @@ -3217,7 +3224,7 @@ assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; assigned-clock-rates = <19200000>; - interconnects = <&pcie_south_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS + interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>; @@ -3254,14 +3261,16 @@ clocks = <&gcc GCC_PCIE_4_AUX_CLK>, <&gcc GCC_PCIE_4_CFG_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>, + <&tcsr TCSR_PCIE_2L_4_CLKREF_EN>, <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_4_PIPE_CLK>; + <&gcc GCC_PCIE_4_PIPE_CLK>, + <&gcc GCC_PCIE_4_PIPEDIV2_CLK>; clock-names = "aux", "cfg_ahb", "ref", "rchng", - "pipe"; + "pipe", + "pipediv2"; resets = <&gcc GCC_PCIE_4_PHY_BCR>; reset-names = "phy"; @@ -6084,7 +6093,8 @@ <0 0x25a00000 0 0x200000>, <0 0x25c00000 0 0x200000>, <0 0x25e00000 0 0x200000>, - <0 0x26000000 0 0x200000>; + <0 0x26000000 0 0x200000>, + <0 0x26200000 0 0x200000>; reg-names = "llcc0_base", "llcc1_base", "llcc2_base", @@ -6093,7 +6103,8 @@ "llcc5_base", "llcc6_base", "llcc7_base", - "llcc_broadcast_base"; + "llcc_broadcast_base", + "llcc_broadcast_and_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi index bb1aea82e666..b7163ed74232 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi @@ -66,7 +66,6 @@ bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; - supports-emmc; mmc-pwrseq = <&emmc_pwrseq>; non-removable; vmmc-supply = <&vcc_3v3>; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts index 9232357f4fec..d9e191ad1d77 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts @@ -36,14 +36,14 @@ power_led: led-0 { label = "firefly:red:power"; - linux,default-trigger = "ir-power-click"; + linux,default-trigger = "default-on"; default-state = "on"; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; }; user_led: led-1 { label = "firefly:blue:user"; - linux,default-trigger = "ir-user-click"; + linux,default-trigger = "rc-feedback"; default-state = "off"; gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts index cb81ba3f23ff..4b9ced67742d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts @@ -24,9 +24,7 @@ disable-wp; mmc-hs200-1_8v; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; - supports-emmc; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 16b4faa22e4f..c01a4cad48f3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -754,8 +754,7 @@ compatible = "rockchip,rk3328-dw-hdmi"; reg = <0x0 0xff3c0000 0x0 0x20000>; reg-io-width = <4>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI>, <&cru SCLK_HDMI_SFC>, <&cru SCLK_RTC32K>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index 8ac8acf4082d..ab3fda69a1fb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -61,7 +61,6 @@ fan: fan@18 { compatible = "ti,amc6821"; reg = <0x18>; - #cooling-cells = <2>; }; rtc_twi: rtc@6f { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts index 1489eb32e266..4feb78797982 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts @@ -541,7 +541,7 @@ status = "okay"; rt5651: audio-codec@1a { - compatible = "rockchip,rt5651"; + compatible = "realtek,rt5651"; reg = <0x1a>; clocks = <&cru SCLK_I2S_8CH_OUT>; clock-names = "mclk"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index 1a44582a49fb..09a016ea8c76 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -166,7 +166,6 @@ regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys>; gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; }; /* MIPI DSI panel 2.8v supply */ @@ -178,7 +177,6 @@ regulator-max-microvolt = <2800000>; vin-supply = <&vcc3v3_sys>; gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; }; vibrator { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts index 7ba1c28f70a9..2f06bfdd70bf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts @@ -114,7 +114,6 @@ es8388: es8388@11 { compatible = "everest,es8388"; reg = <0x11>; - clock-names = "mclk"; clocks = <&cru SCLK_I2S_8CH_OUT>; #sound-dai-cells = <0>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 8146f870d2bd..ab890e7b6c59 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -576,7 +576,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&rk808 1>; - clock-names = "ext_clock"; + clock-names = "txco"; device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index dbec2b7173a0..31ea3d0182c0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -163,7 +163,7 @@ status = "okay"; rt5651: rt5651@1a { - compatible = "rockchip,rt5651"; + compatible = "realtek,rt5651"; reg = <0x1a>; clocks = <&cru SCLK_I2S_8CH_OUT>; clock-names = "mclk"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts index a73cf30801ec..9816a4ed4599 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts @@ -92,7 +92,7 @@ }; &i2c2 { - pintctrl-names = "default"; + pinctrl-names = "default"; pinctrl-0 = <&i2c2m1_xfer>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts index e9954a33e8cd..a79a5614bcc8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts @@ -79,7 +79,7 @@ }; &i2c2 { - pintctrl-names = "default"; + pinctrl-names = "default"; pinctrl-0 = <&i2c2m1_xfer>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts index 0c18406e4c59..7d4680933823 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts @@ -449,9 +449,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&pmucru CLK_RTC_32K>; - clock-names = "ext_clock"; - device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + clock-names = "txco"; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts index c1194d1e438d..9a2f59a351de 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts @@ -507,7 +507,6 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; - supports-emmc; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index ae2536c65a83..0131f2cdd312 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -684,11 +684,11 @@ compatible = "brcm,bcm43438-bt"; clocks = <&rk817 1>; clock-names = "lpo"; - device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; + device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>; pinctrl-names = "default"; + shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; vbat-supply = <&vcc_wl>; vddio-supply = <&vcca_1v8_pmu>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi index 45de2630bb50..1e36f73840da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi @@ -402,9 +402,9 @@ clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>; + shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; vbat-supply = <&vcc_3v3>; vddio-supply = <&vcc_1v8>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts index a3112d5df200..b505a4537ee8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts @@ -589,7 +589,6 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; - supports-emmc; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts index e333449ead04..2fa89a0eeafc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts @@ -272,7 +272,6 @@ regulator-name = "vdd_logic"; regulator-always-on; regulator-boot-on; - regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; @@ -285,7 +284,6 @@ vdd_gpu: DCDC_REG2 { regulator-name = "vdd_gpu"; - regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; @@ -309,7 +307,6 @@ vdd_npu: DCDC_REG4 { regulator-name = "vdd_npu"; - regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index d97d84b88837..fc67585b64b7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -337,15 +337,19 @@ cache-unified; next-level-cache = <&l3_cache>; }; + }; - l3_cache: l3-cache { - compatible = "cache"; - cache-size = <3145728>; - cache-line-size = <64>; - cache-sets = <4096>; - cache-level = <3>; - cache-unified; - }; + /* + * The L3 cache belongs to the DynamIQ Shared Unit (DSU), + * so it's represented here, outside the "cpus" node + */ + l3_cache: l3-cache { + compatible = "cache"; + cache-size = <3145728>; + cache-line-size = <64>; + cache-sets = <4096>; + cache-level = <3>; + cache-unified; }; display_subsystem: display-subsystem { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index c3a6812cc93a..dd4c79bcad87 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -328,7 +328,6 @@ compatible = "everest,es8388"; reg = <0x11>; clocks = <&cru I2S0_8CH_MCLKOUT>; - clock-names = "mclk"; AVDD-supply = <&vcc_1v8_s0>; DVDD-supply = <&vcc_1v8_s0>; HPVDD-supply = <&vcc_3v3_s0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts index e4a20cda65ed..b38dab009ccc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts @@ -316,7 +316,6 @@ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-rates = <12288000>; clocks = <&cru I2S0_8CH_MCLKOUT>; - clock-names = "mclk"; AVDD-supply = <&avcc_1v8_codec_s0>; DVDD-supply = <&avcc_1v8_codec_s0>; HPVDD-supply = <&vcc_3v3_s0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 966bbc582d89..6bd06e46a101 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -304,12 +304,12 @@ }; cooling-maps { - map1 { + map0 { trip = <&package_fan0>; cooling-device = <&fan THERMAL_NO_LIMIT 1>; }; - map2 { + map1 { trip = <&package_fan1>; cooling-device = <&fan 2 THERMAL_NO_LIMIT>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts index d0021524e7f9..328dcb894ccb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts @@ -428,7 +428,6 @@ regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; - regulator-init-microvolt = <750000>; regulator-ramp-delay = <12500>; regulator-state-mem { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index dbaa94ca69f4..432133251e31 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -296,6 +296,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index d8c50fdcca3b..8ba111d9283f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -377,7 +377,6 @@ assigned-clock-rates = <12288000>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; AVDD-supply = <&vcc_3v3_s3>; - clock-names = "mclk"; clocks = <&cru I2S0_8CH_MCLKOUT>; DVDD-supply = <&vcc_1v8_s3>; HPVDD-supply = <&vcc_3v3_s3>; diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi index 4e5fa6591623..e62ac51ac55a 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi @@ -112,7 +112,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -134,7 +134,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -156,7 +156,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi index c7771b3b6475..d6c55f1cc96a 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -128,7 +128,6 @@ assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; assigned-clock-rates = <49500000>, <198000000>; - status = "okay"; ports { #address-cells = <1>; @@ -151,7 +150,6 @@ &csi2rx { assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; assigned-clock-rates = <297000000>; - status = "okay"; ports { #address-cells = <1>; diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts index b720cdd15ed6..8e39fdc73ecb 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts @@ -44,8 +44,7 @@ }; &phy0 { - rx-internal-delay-ps = <1900>; - tx-internal-delay-ps = <1500>; + rx-internal-delay-ps = <1500>; motorcomm,rx-clk-drv-microamp = <2910>; motorcomm,rx-data-drv-microamp = <2910>; motorcomm,tx-clk-adj-enabled; diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c index d3cd4cc54ace..a9a8ba067007 100644 --- a/drivers/edac/qcom_edac.c +++ b/drivers/edac/qcom_edac.c @@ -342,9 +342,11 @@ static int qcom_llcc_edac_probe(struct platform_device *pdev) int ecc_irq; int rc; - rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap); - if (rc) - return rc; + if (!llcc_driv_data->ecc_irq_configured) { + rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap); + if (rc) + return rc; + } /* Allocate edac control info */ edev_ctl = edac_device_alloc_ctl_info(0, "qcom-llcc", 1, "bank", diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c index 96b2e5f9a8ef..157172a5f2b5 100644 --- a/drivers/firmware/arm_scmi/bus.c +++ b/drivers/firmware/arm_scmi/bus.c @@ -325,7 +325,10 @@ EXPORT_SYMBOL_GPL(scmi_driver_unregister); static void scmi_device_release(struct device *dev) { - kfree(to_scmi_dev(dev)); + struct scmi_device *scmi_dev = to_scmi_dev(dev); + + kfree_const(scmi_dev->name); + kfree(scmi_dev); } static void __scmi_device_destroy(struct scmi_device *scmi_dev) @@ -338,7 +341,6 @@ static void __scmi_device_destroy(struct scmi_device *scmi_dev) if (scmi_dev->protocol_id == SCMI_PROTOCOL_SYSTEM) atomic_set(&scmi_syspower_registered, 0); - kfree_const(scmi_dev->name); ida_free(&scmi_bus_id, scmi_dev->id); device_unregister(&scmi_dev->dev); } @@ -410,7 +412,6 @@ __scmi_device_create(struct device_node *np, struct device *parent, return scmi_dev; put_dev: - kfree_const(scmi_dev->name); put_device(&scmi_dev->dev); ida_free(&scmi_bus_id, id); return NULL; diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h index c4b8e7ff88aa..cdec50a698a1 100644 --- a/drivers/firmware/arm_scmi/common.h +++ b/drivers/firmware/arm_scmi/common.h @@ -163,6 +163,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id); * used to initialize this channel * @dev: Reference to device in the SCMI hierarchy corresponding to this * channel + * @is_p2a: A flag to identify a channel as P2A (RX) * @rx_timeout_ms: The configured RX timeout in milliseconds. * @handle: Pointer to SCMI entity handle * @no_completion_irq: Flag to indicate that this channel has no completion @@ -174,6 +175,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id); struct scmi_chan_info { int id; struct device *dev; + bool is_p2a; unsigned int rx_timeout_ms; struct scmi_handle *handle; bool no_completion_irq; diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index a477b5ade38d..f8934d049d68 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -1048,6 +1048,11 @@ static inline void scmi_xfer_command_release(struct scmi_info *info, static inline void scmi_clear_channel(struct scmi_info *info, struct scmi_chan_info *cinfo) { + if (!cinfo->is_p2a) { + dev_warn(cinfo->dev, "Invalid clear on A2P channel !\n"); + return; + } + if (info->desc->ops->clear_channel) info->desc->ops->clear_channel(cinfo); } @@ -2638,6 +2643,7 @@ static int scmi_chan_setup(struct scmi_info *info, struct device_node *of_node, if (!cinfo) return -ENOMEM; + cinfo->is_p2a = !tx; cinfo->rx_timeout_ms = info->desc->max_rx_timeout_ms; /* Create a unique name for this transport device */ @@ -3042,10 +3048,10 @@ static const struct scmi_desc *scmi_transport_setup(struct device *dev) dev_info(dev, "Using %s\n", dev_driver_string(trans->supplier)); - ret = of_property_read_u32(dev->of_node, "max-rx-timeout-ms", + ret = of_property_read_u32(dev->of_node, "arm,max-rx-timeout-ms", &trans->desc->max_rx_timeout_ms); if (ret && ret != -EINVAL) - dev_err(dev, "Malformed max-rx-timeout-ms DT property.\n"); + dev_err(dev, "Malformed arm,max-rx-timeout-ms DT property.\n"); dev_info(dev, "SCMI max-rx-timeout: %dms\n", trans->desc->max_rx_timeout_ms); diff --git a/drivers/firmware/microchip/mpfs-auto-update.c b/drivers/firmware/microchip/mpfs-auto-update.c index 9ca5ee58edbd..0f7ec8848202 100644 --- a/drivers/firmware/microchip/mpfs-auto-update.c +++ b/drivers/firmware/microchip/mpfs-auto-update.c @@ -76,14 +76,11 @@ #define AUTO_UPDATE_INFO_SIZE SZ_1M #define AUTO_UPDATE_BITSTREAM_BASE (AUTO_UPDATE_DIRECTORY_SIZE + AUTO_UPDATE_INFO_SIZE) -#define AUTO_UPDATE_TIMEOUT_MS 60000 - struct mpfs_auto_update_priv { struct mpfs_sys_controller *sys_controller; struct device *dev; struct mtd_info *flash; struct fw_upload *fw_uploader; - struct completion programming_complete; size_t size_per_bitstream; bool cancel_request; }; @@ -156,19 +153,6 @@ static void mpfs_auto_update_cancel(struct fw_upload *fw_uploader) static enum fw_upload_err mpfs_auto_update_poll_complete(struct fw_upload *fw_uploader) { - struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle; - int ret; - - /* - * There is no meaningful way to get the status of the programming while - * it is in progress, so attempting anything other than waiting for it - * to complete would be misplaced. - */ - ret = wait_for_completion_timeout(&priv->programming_complete, - msecs_to_jiffies(AUTO_UPDATE_TIMEOUT_MS)); - if (!ret) - return FW_UPLOAD_ERR_TIMEOUT; - return FW_UPLOAD_ERR_NONE; } @@ -349,33 +333,23 @@ static enum fw_upload_err mpfs_auto_update_write(struct fw_upload *fw_uploader, u32 offset, u32 size, u32 *written) { struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle; - enum fw_upload_err err = FW_UPLOAD_ERR_NONE; int ret; - reinit_completion(&priv->programming_complete); - ret = mpfs_auto_update_write_bitstream(fw_uploader, data, offset, size, written); - if (ret) { - err = FW_UPLOAD_ERR_RW_ERROR; - goto out; - } + if (ret) + return FW_UPLOAD_ERR_RW_ERROR; - if (priv->cancel_request) { - err = FW_UPLOAD_ERR_CANCELED; - goto out; - } + if (priv->cancel_request) + return FW_UPLOAD_ERR_CANCELED; if (mpfs_auto_update_is_bitstream_info(data, size)) - goto out; + return FW_UPLOAD_ERR_NONE; ret = mpfs_auto_update_verify_image(fw_uploader); if (ret) - err = FW_UPLOAD_ERR_FW_INVALID; + return FW_UPLOAD_ERR_FW_INVALID; -out: - complete(&priv->programming_complete); - - return err; + return FW_UPLOAD_ERR_NONE; } static const struct fw_upload_ops mpfs_auto_update_ops = { @@ -461,8 +435,6 @@ static int mpfs_auto_update_probe(struct platform_device *pdev) return dev_err_probe(dev, ret, "The current bitstream does not support auto-update\n"); - init_completion(&priv->programming_complete); - fw_uploader = firmware_upload_register(THIS_MODULE, dev, "mpfs-auto-update", &mpfs_auto_update_ops, priv); if (IS_ERR(fw_uploader)) diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 10986cb11ec0..2e4260ba5f79 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -112,6 +112,7 @@ enum qcom_scm_qseecom_tz_cmd_info { }; #define QSEECOM_MAX_APP_NAME_SIZE 64 +#define SHMBRIDGE_RESULT_NOTSUPP 4 /* Each bit configures cold/warm boot address for one of the 4 CPUs */ static const u8 qcom_scm_cpu_cold_bits[QCOM_SCM_BOOT_MAX_CPUS] = { @@ -216,7 +217,7 @@ static DEFINE_SPINLOCK(scm_query_lock); struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void) { - return __scm->mempool; + return __scm ? __scm->mempool : NULL; } static enum qcom_scm_convention __get_convention(void) @@ -545,7 +546,7 @@ static void qcom_scm_set_download_mode(u32 dload_mode) } else if (__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE)) { ret = __qcom_scm_set_dload_mode(__scm->dev, !!dload_mode); - } else { + } else if (dload_mode) { dev_err(__scm->dev, "No available mechanism for setting download mode\n"); } @@ -1361,6 +1362,8 @@ EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh_available); int qcom_scm_shm_bridge_enable(void) { + int ret; + struct qcom_scm_desc desc = { .svc = QCOM_SCM_SVC_MP, .cmd = QCOM_SCM_MP_SHM_BRIDGE_ENABLE, @@ -1373,7 +1376,15 @@ int qcom_scm_shm_bridge_enable(void) QCOM_SCM_MP_SHM_BRIDGE_ENABLE)) return -EOPNOTSUPP; - return qcom_scm_call(__scm->dev, &desc, &res) ?: res.result[0]; + ret = qcom_scm_call(__scm->dev, &desc, &res); + + if (ret) + return ret; + + if (res.result[0] == SHMBRIDGE_RESULT_NOTSUPP) + return -EOPNOTSUPP; + + return res.result[0]; } EXPORT_SYMBOL_GPL(qcom_scm_shm_bridge_enable); diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c index 0b2f29006908..d3af1dfa3c7d 100644 --- a/drivers/rpmsg/qcom_glink_native.c +++ b/drivers/rpmsg/qcom_glink_native.c @@ -1440,14 +1440,18 @@ static int qcom_glink_request_intent(struct qcom_glink *glink, goto unlock; ret = wait_event_timeout(channel->intent_req_wq, - READ_ONCE(channel->intent_req_result) >= 0 && - READ_ONCE(channel->intent_received), + READ_ONCE(channel->intent_req_result) == 0 || + (READ_ONCE(channel->intent_req_result) > 0 && + READ_ONCE(channel->intent_received)) || + glink->abort_tx, 10 * HZ); if (!ret) { dev_err(glink->dev, "intent request timed out\n"); ret = -ETIMEDOUT; + } else if (glink->abort_tx) { + ret = -ECANCELED; } else { - ret = READ_ONCE(channel->intent_req_result) ? 0 : -ECANCELED; + ret = READ_ONCE(channel->intent_req_result) ? 0 : -EAGAIN; } unlock: diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index 8fa4ffd3a9b5..28bcc65e91be 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -139,6 +139,7 @@ struct qcom_llcc_config { int size; bool need_llcc_cfg; bool no_edac; + bool irq_configured; }; struct qcom_sct_config { @@ -718,6 +719,7 @@ static const struct qcom_llcc_config x1e80100_cfg[] = { .need_llcc_cfg = true, .reg_offset = llcc_v2_1_reg_offset, .edac_reg_offset = &llcc_v2_1_edac_reg_offset, + .irq_configured = true, }, }; @@ -1345,6 +1347,7 @@ static int qcom_llcc_probe(struct platform_device *pdev) drv_data->cfg = llcc_cfg; drv_data->cfg_size = sz; drv_data->edac_reg_offset = cfg->edac_reg_offset; + drv_data->ecc_irq_configured = cfg->irq_configured; mutex_init(&drv_data->lock); platform_set_drvdata(pdev, drv_data); diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c index 9606222993fd..baa4ac6704a9 100644 --- a/drivers/soc/qcom/pmic_glink.c +++ b/drivers/soc/qcom/pmic_glink.c @@ -4,6 +4,7 @@ * Copyright (c) 2022, Linaro Ltd */ #include <linux/auxiliary_bus.h> +#include <linux/delay.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> @@ -13,6 +14,8 @@ #include <linux/soc/qcom/pmic_glink.h> #include <linux/spinlock.h> +#define PMIC_GLINK_SEND_TIMEOUT (5 * HZ) + enum { PMIC_GLINK_CLIENT_BATT = 0, PMIC_GLINK_CLIENT_ALTMODE, @@ -112,13 +115,29 @@ EXPORT_SYMBOL_GPL(pmic_glink_client_register); int pmic_glink_send(struct pmic_glink_client *client, void *data, size_t len) { struct pmic_glink *pg = client->pg; + bool timeout_reached = false; + unsigned long start; int ret; mutex_lock(&pg->state_lock); - if (!pg->ept) + if (!pg->ept) { ret = -ECONNRESET; - else - ret = rpmsg_send(pg->ept, data, len); + } else { + start = jiffies; + for (;;) { + ret = rpmsg_send(pg->ept, data, len); + if (ret != -EAGAIN) + break; + + if (timeout_reached) { + ret = -ETIMEDOUT; + break; + } + + usleep_range(1000, 5000); + timeout_reached = time_after(jiffies, start + PMIC_GLINK_SEND_TIMEOUT); + } + } mutex_unlock(&pg->state_lock); return ret; diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c index 64fc4f41da77..ecfd3da9d5e8 100644 --- a/drivers/soc/qcom/socinfo.c +++ b/drivers/soc/qcom/socinfo.c @@ -786,10 +786,16 @@ static int qcom_socinfo_probe(struct platform_device *pdev) qs->attr.revision = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%u.%u", SOCINFO_MAJOR(le32_to_cpu(info->ver)), SOCINFO_MINOR(le32_to_cpu(info->ver))); - if (offsetof(struct socinfo, serial_num) <= item_size) + if (!qs->attr.soc_id || !qs->attr.revision) + return -ENOMEM; + + if (offsetof(struct socinfo, serial_num) <= item_size) { qs->attr.serial_number = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%u", le32_to_cpu(info->serial_num)); + if (!qs->attr.serial_number) + return -ENOMEM; + } qs->soc_dev = soc_device_register(&qs->attr); if (IS_ERR(qs->soc_dev)) diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h index 9e9f528b1370..2f20281d4ad4 100644 --- a/include/linux/soc/qcom/llcc-qcom.h +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -125,6 +125,7 @@ struct llcc_edac_reg_offset { * @num_banks: Number of llcc banks * @bitmap: Bit map to track the active slice ids * @ecc_irq: interrupt for llcc cache error detection and reporting + * @ecc_irq_configured: 'True' if firmware has already configured the irq propagation * @version: Indicates the LLCC version */ struct llcc_drv_data { @@ -139,6 +140,7 @@ struct llcc_drv_data { u32 num_banks; unsigned long *bitmap; int ecc_irq; + bool ecc_irq_configured; u32 version; }; |