1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
*/
/dts-v1/;
#include "rk3399-roc-pc.dtsi"
/*
* Notice:
* 1. rk3399-roc-pc-plus is powered by dc_12v directly.
* 2. rk3399-roc-pc-plus has only vcc_bus_typec0 in schematic, which is coresponding
* to vcc_vbus_typec1 in rk3399-roc-pc.
* For simplicity, reserve the node name of vcc_vbus_typec1.
* 3. vcc5v0_host is actually 2 regulators (host0, 1) controlled by the same gpio.
*/
/delete-node/ &fusb1;
/delete-node/ &hub_rst;
/delete-node/ &mp8859;
/delete-node/ &vcc_sys_en;
/delete-node/ &vcc_vbus_typec0;
/delete-node/ &yellow_led;
/ {
model = "Firefly ROC-RK3399-PC-PLUS Board";
compatible = "firefly,roc-rk3399-pc-plus", "rockchip,rk3399";
dc_12v: dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
es8388-sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&hp_det_pin>;
simple-audio-card,name = "rockchip,es8388-codec";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Headphone", "Headphones";
simple-audio-card,routing =
"LINPUT1", "Mic Jack",
"Headphone Amp INL", "LOUT2",
"Headphone Amp INR", "ROUT2",
"Headphones", "Headphone Amp OUTL",
"Headphones", "Headphone Amp OUTR";
simple-audio-card,hp-det-gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
simple-audio-card,aux-devs = <&headphones_amp>;
simple-audio-card,pin-switches = "Headphones";
simple-audio-card,codec {
sound-dai = <&es8388>;
};
simple-audio-card,cpu {
sound-dai = <&i2s1>;
};
};
gpio-fan {
#cooling-cells = <2>;
compatible = "gpio-fan";
gpio-fan,speed-map = <0 0 3000 1>;
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
};
/delete-node/ gpio-keys;
/* not amplifier, used as switcher only */
headphones_amp: headphones-amp {
compatible = "simple-audio-amplifier";
pinctrl-names = "default";
pinctrl-0 = <&ear_ctl_pin>;
enable-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Headphone Amp";
VCC-supply = <&vcca3v0_codec>;
};
ir-receiver {
linux,rc-map-name = "rc-khadas";
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
};
};
&fusb0 {
vbus-supply = <&vcc_vbus_typec1>;
};
&i2c0 {
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA5 IRQ_TYPE_EDGE_FALLING>;
#clock-cells = <0>;
clock-output-names = "xin32k";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
};
};
&i2c1 {
es8388: es8388@11 {
compatible = "everest,es8388";
reg = <0x11>;
clock-names = "mclk";
clocks = <&cru SCLK_I2S_8CH_OUT>;
#sound-dai-cells = <0>;
};
};
/* <4 RK_PA0 1 &pcfg_pull_none> is used as i2s_8ch_mclk_pin */
&i2s0_8ch_bus {
rockchip,pins =
<3 RK_PD0 1 &pcfg_pull_none>,
<3 RK_PD1 1 &pcfg_pull_none>,
<3 RK_PD2 1 &pcfg_pull_none>,
<3 RK_PD3 1 &pcfg_pull_none>,
<3 RK_PD4 1 &pcfg_pull_none>,
<3 RK_PD5 1 &pcfg_pull_none>,
<3 RK_PD6 1 &pcfg_pull_none>,
<3 RK_PD7 1 &pcfg_pull_none>;
};
&i2s1 {
pinctrl-names = "default";
pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
rockchip,playback-channels = <2>;
rockchip,capture-channels = <2>;
status = "okay";
};
&pinctrl {
es8388 {
ear_ctl_pin: ear-ctl-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
};
hp_det_pin: hp-det-pin {
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
i2s1 {
i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
};
};
};
&u2phy0 {
status = "okay";
u2phy0_otg: otg-port {
phy-supply = <&vcc_vbus_typec1>;
status = "okay";
};
u2phy0_host: host-port {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
};
&u2phy1 {
status = "okay";
u2phy1_otg: otg-port {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
u2phy1_host: host-port {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
status = "okay";
};
&usbdrd_dwc3_0 {
dr_mode = "host";
status = "okay";
};
&vcc_sys {
/* vcc_sys is fixed, not controlled by any gpio */
/delete-property/ gpio;
/delete-property/ pinctrl-names;
/delete-property/ pinctrl-0;
};
&vcc5v0_host {
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
};
|
