Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM multiplatform updates from Arnd Bergmann:
 "The second part of the multiplatform changes now converts the
  Intel/Marvell PXA platform along with the rest. The patches went
  through several rebases before the merge window as bugs were found, so
  they remained separate.

  This has to touch a lot of drivers, in particular the touchscreen,
  pcmcia, sound and clk bits, to detach the driver files from the
  platform and board specific header files"

* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  ARM: pxa/mmp: remove traces of plat-pxa
  ARM: pxa: convert to multiplatform
  ARM: pxa/sa1100: move I/O space to PCI_IOBASE
  ARM: pxa: remove support for MTD_XIP
  ARM: pxa: move mach/*.h to mach-pxa/
  ARM: PXA: fix multi-cpu build of xsc3
  ARM: pxa: move plat-pxa to drivers/soc/
  ARM: mmp: rename pxa_register_device
  ARM: mmp: remove tavorevb board support
  ARM: pxa: remove unused mach/bitfield.h
  ARM: pxa: move clk register definitions to driver
  ARM: pxa: move smemc register access from clk to platform
  cpufreq: pxa3: move clk register access to clk driver
  ARM: pxa: remove get_clk_frequency_khz()
  ARM: pxa: pcmcia: move smemc configuration back to arch
  ASoC: pxa: i2s: use normal MMIO accessors
  ASoC: pxa: ac97: use normal MMIO accessors
  ASoC: pxa: use pdev resource for FIFO regs
  Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
  Input: wm97xx - switch to using threaded IRQ
  ...

17 files changed, 28 insertions, 1626 deletions

diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index c43267b18f55..c59ddde42007 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -50,18 +50,5 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD)		+= sa1100_simpad.o
 
 pxa2xx-obj-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
 pxa2xx-obj-$(CONFIG_PXA_SHARPSL)		+= pxa2xx_sharpsl.o
-pxa2xx-obj-$(CONFIG_ARCOM_PCMCIA)		+= pxa2xx_viper.o
-pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
-pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
-pxa2xx-obj-$(CONFIG_MACH_PALMTC)		+= pxa2xx_palmtc.o
-pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
-pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
-pxa2xx-obj-$(CONFIG_MACH_VPAC270)		+= pxa2xx_vpac270.o
-pxa2xx-obj-$(CONFIG_MACH_BALLOON3)		+= pxa2xx_balloon3.o
-pxa2xx-obj-$(CONFIG_MACH_COLIBRI)		+= pxa2xx_colibri.o
-pxa2xx-obj-$(CONFIG_MACH_COLIBRI320)		+= pxa2xx_colibri.o
-pxa2xx-obj-$(CONFIG_MACH_H4700)			+= pxa2xx_hx4700.o
-
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
-
 obj-$(CONFIG_PCMCIA_XXS1500)			+= xxs1500_ss.o
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
deleted file mode 100644
index 5fe1da7a50e4..000000000000
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_balloon3.c
- *
- * Balloon3 PCMCIA specific routines.
- *
- *  Author:	Nick Bane
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from pxa2xx_mainstone.c, by Nico Pitre
- *
- * Various modification by Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/balloon3.h>
-
-#include <asm/mach-types.h>
-
-#include "soc_common.h"
-
-static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	uint16_t ver;
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"PCMCIA/CF support might be broken in this version!",
-			ver);
-
-	skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
-	skt->stat[SOC_STAT_CD].gpio = BALLOON3_GPIO_S0_CD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
-	skt->stat[SOC_STAT_BVD1].irq = BALLOON3_BP_NSTSCHG_IRQ;
-	skt->stat[SOC_STAT_BVD1].name = "PCMCIA0 STSCHG";
-
-	return 0;
-}
-
-static unsigned long balloon3_pcmcia_status[2] = {
-	BALLOON3_CF_nSTSCHG_BVD1,
-	BALLOON3_CF_nSTSCHG_BVD1
-};
-
-static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				    struct pcmcia_state *state)
-{
-	uint16_t status;
-	int flip;
-
-	/* This actually reads the STATUS register */
-	status = __raw_readw(BALLOON3_CF_STATUS_REG);
-	flip = (status ^ balloon3_pcmcia_status[skt->nr])
-		& BALLOON3_CF_nSTSCHG_BVD1;
-	/*
-	 * Workaround for STSCHG which can't be deasserted:
-	 * We therefore disable/enable corresponding IRQs
-	 * as needed to avoid IRQ locks.
-	 */
-	if (flip) {
-		balloon3_pcmcia_status[skt->nr] = status;
-		if (status & BALLOON3_CF_nSTSCHG_BVD1)
-			enable_irq(BALLOON3_BP_NSTSCHG_IRQ);
-		else
-			disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
-	}
-
-	state->ready	= !!(status & BALLOON3_CF_nIRQ);
-	state->bvd1	= !!(status & BALLOON3_CF_nSTSCHG_BVD1);
-	state->bvd2	= 0;	/* not available */
-	state->vs_3v	= 1;	/* Always true its a CF card */
-	state->vs_Xv	= 0;	/* not available */
-}
-
-static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				       const socket_state_t *state)
-{
-	__raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG +
-			((state->flags & SS_RESET) ?
-			BALLOON3_FPGA_SETnCLR : 0));
-	return 0;
-}
-
-static struct pcmcia_low_level balloon3_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= balloon3_pcmcia_hw_init,
-	.socket_state		= balloon3_pcmcia_socket_state,
-	.configure_socket	= balloon3_pcmcia_configure_socket,
-	.first			= 0,
-	.nr			= 1,
-};
-
-static struct platform_device *balloon3_pcmcia_device;
-
-static int __init balloon3_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_balloon3())
-		return -ENODEV;
-
-	balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!balloon3_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(balloon3_pcmcia_device,
-			&balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(balloon3_pcmcia_device);
-
-	if (ret)
-		platform_device_put(balloon3_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit balloon3_pcmcia_exit(void)
-{
-	platform_device_unregister(balloon3_pcmcia_device);
-}
-
-module_init(balloon3_pcmcia_init);
-module_exit(balloon3_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver");
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index d6d2f75f8f47..0ea41f1411e5 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -23,12 +23,11 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/soc/pxa/smemc.h>
 
-#include <mach/hardware.h>
-#include <mach/smemc.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <mach/pxa2xx-regs.h>
 #include <asm/mach-types.h>
 
 #include <pcmcia/ss.h>
@@ -113,7 +112,7 @@ static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz,
 	return (300000 * (pcmcia_mcxx_asst + 1) / mem_clk_10khz);
 }
 
-static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
+static uint32_t pxa2xx_pcmcia_mcmem(int sock, int speed, int clock)
 {
 	uint32_t val;
 
@@ -124,12 +123,10 @@ static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
 		| ((pxa2xx_mcxx_hold(speed, clock)
 		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
-	__raw_writel(val, MCMEM(sock));
-
-	return 0;
+	return val;
 }
 
-static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
+static int pxa2xx_pcmcia_mcio(int sock, int speed, int clock)
 {
 	uint32_t val;
 
@@ -140,12 +137,11 @@ static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
 		| ((pxa2xx_mcxx_hold(speed, clock)
 		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
-	__raw_writel(val, MCIO(sock));
 
-	return 0;
+	return val;
 }
 
-static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
+static int pxa2xx_pcmcia_mcatt(int sock, int speed, int clock)
 {
 	uint32_t val;
 
@@ -156,31 +152,26 @@ static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
 		| ((pxa2xx_mcxx_hold(speed, clock)
 		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
-	__raw_writel(val, MCATT(sock));
 
-	return 0;
+	return val;
 }
 
-static int pxa2xx_pcmcia_set_mcxx(struct soc_pcmcia_socket *skt, unsigned int clk)
+static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
 {
+	unsigned long clk = clk_get_rate(skt->clk) / 10000;
 	struct soc_pcmcia_timing timing;
 	int sock = skt->nr;
 
 	soc_common_pcmcia_get_timing(skt, &timing);
 
-	pxa2xx_pcmcia_set_mcmem(sock, timing.mem, clk);
-	pxa2xx_pcmcia_set_mcatt(sock, timing.attr, clk);
-	pxa2xx_pcmcia_set_mcio(sock, timing.io, clk);
+	pxa_smemc_set_pcmcia_timing(sock,
+		pxa2xx_pcmcia_mcmem(sock, timing.mem, clk),
+		pxa2xx_pcmcia_mcatt(sock, timing.attr, clk),
+		pxa2xx_pcmcia_mcio(sock, timing.io, clk));
 
 	return 0;
 }
 
-static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
-{
-	unsigned long clk = clk_get_rate(skt->clk);
-	return pxa2xx_pcmcia_set_mcxx(skt, clk / 10000);
-}
-
 #ifdef CONFIG_CPU_FREQ
 
 static int
@@ -215,18 +206,13 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
 
 void pxa2xx_configure_sockets(struct device *dev, struct pcmcia_low_level *ops)
 {
-	/*
-	 * We have at least one socket, so set MECR:CIT
-	 * (Card Is There)
-	 */
-	uint32_t mecr = MECR_CIT;
+	int nr = 1;
 
-	/* Set MECR:NOS (Number Of Sockets) */
 	if ((ops->first + ops->nr) > 1 ||
 	    machine_is_viper() || machine_is_arcom_zeus())
-		mecr |= MECR_NOS;
+		nr = 2;
 
-	__raw_writel(mecr, MECR);
+	pxa_smemc_set_pcmcia_socket(nr);
 }
 EXPORT_SYMBOL(pxa2xx_configure_sockets);
 
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
deleted file mode 100644
index f0f725e99604..000000000000
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_colibri.c
- *
- * Driver for Toradex Colibri PXA270 CF socket
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include "soc_common.h"
-
-#define	COLIBRI270_RESET_GPIO	53
-#define	COLIBRI270_PPEN_GPIO	107
-#define	COLIBRI270_BVD1_GPIO	83
-#define	COLIBRI270_BVD2_GPIO	82
-#define	COLIBRI270_DETECT_GPIO	84
-#define	COLIBRI270_READY_GPIO	1
-
-#define	COLIBRI320_RESET_GPIO	77
-#define	COLIBRI320_PPEN_GPIO	57
-#define	COLIBRI320_BVD1_GPIO	53
-#define	COLIBRI320_BVD2_GPIO	79
-#define	COLIBRI320_DETECT_GPIO	81
-#define	COLIBRI320_READY_GPIO	29
-
-enum {
-	DETECT = 0,
-	READY = 1,
-	BVD1 = 2,
-	BVD2 = 3,
-	PPEN = 4,
-	RESET = 5,
-};
-
-/* Contents of this array are configured on-the-fly in init function */
-static struct gpio colibri_pcmcia_gpios[] = {
-	{ 0,	GPIOF_IN,	"PCMCIA Detect" },
-	{ 0,	GPIOF_IN,	"PCMCIA Ready" },
-	{ 0,	GPIOF_IN,	"PCMCIA BVD1" },
-	{ 0,	GPIOF_IN,	"PCMCIA BVD2" },
-	{ 0,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
-	{ 0,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(colibri_pcmcia_gpios,
-				ARRAY_SIZE(colibri_pcmcia_gpios));
-	if (ret)
-		goto err1;
-
-	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
-	skt->stat[SOC_STAT_CD].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-
-err1:
-	return ret;
-}
-
-static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(colibri_pcmcia_gpios,
-			ARRAY_SIZE(colibri_pcmcia_gpios));
-}
-
-static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-
-	state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio);
-	state->ready  = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
-	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
-	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio,
-			!(state->Vcc == 33 && state->Vpp < 50));
-	gpio_set_value(colibri_pcmcia_gpios[RESET].gpio,
-			state->flags & SS_RESET);
-	return 0;
-}
-
-static struct pcmcia_low_level colibri_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= colibri_pcmcia_hw_init,
-	.hw_shutdown		= colibri_pcmcia_hw_shutdown,
-
-	.socket_state		= colibri_pcmcia_socket_state,
-	.configure_socket	= colibri_pcmcia_configure_socket,
-};
-
-static struct platform_device *colibri_pcmcia_device;
-
-static int __init colibri_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_colibri() && !machine_is_colibri320())
-		return -ENODEV;
-
-	colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!colibri_pcmcia_device)
-		return -ENOMEM;
-
-	/* Colibri PXA270 */
-	if (machine_is_colibri()) {
-		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI270_RESET_GPIO;
-		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI270_PPEN_GPIO;
-		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI270_BVD1_GPIO;
-		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI270_BVD2_GPIO;
-		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI270_DETECT_GPIO;
-		colibri_pcmcia_gpios[READY].gpio	= COLIBRI270_READY_GPIO;
-	/* Colibri PXA320 */
-	} else if (machine_is_colibri320()) {
-		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI320_RESET_GPIO;
-		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI320_PPEN_GPIO;
-		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI320_BVD1_GPIO;
-		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI320_BVD2_GPIO;
-		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI320_DETECT_GPIO;
-		colibri_pcmcia_gpios[READY].gpio	= COLIBRI320_READY_GPIO;
-	}
-
-	ret = platform_device_add_data(colibri_pcmcia_device,
-		&colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(colibri_pcmcia_device);
-
-	if (ret)
-		platform_device_put(colibri_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit colibri_pcmcia_exit(void)
-{
-	platform_device_unregister(colibri_pcmcia_device);
-}
-
-module_init(colibri_pcmcia_init);
-module_exit(colibri_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
deleted file mode 100644
index 72caa6d05ab9..000000000000
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Toshiba e740 PCMCIA specific routines.
- *
- * (c) 2004 Ian Molton <spyro@f2s.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <mach/eseries-gpio.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "soc_common.h"
-
-static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	if (skt->nr == 0) {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD0;
-		skt->stat[SOC_STAT_CD].name = "CF card detect";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY0;
-		skt->stat[SOC_STAT_RDY].name = "CF ready";
-	} else {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD1;
-		skt->stat[SOC_STAT_CD].name = "Wifi switch";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY1;
-		skt->stat[SOC_STAT_RDY].name = "Wifi ready";
-	}
-
-	return 0;
-}
-
-static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	if (state->flags & SS_RESET) {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 1);
-	} else {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 0);
-	}
-
-	switch (state->Vcc) {
-	case 0:	/* Socket off */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1);
-		break;
-	case 50:
-	case 33: /* socket on */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0);
-		break;
-	default:
-		printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc);
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level e740_pcmcia_ops = {
-	.owner            = THIS_MODULE,
-	.hw_init          = e740_pcmcia_hw_init,
-	.socket_state     = e740_pcmcia_socket_state,
-	.configure_socket = e740_pcmcia_configure_socket,
-	.nr               = 2,
-};
-
-static struct platform_device *e740_pcmcia_device;
-
-static int __init e740_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_e740())
-		return -ENODEV;
-
-	e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!e740_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops,
-					sizeof(e740_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(e740_pcmcia_device);
-
-	if (ret)
-		platform_device_put(e740_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit e740_pcmcia_exit(void)
-{
-	platform_device_unregister(e740_pcmcia_device);
-}
-
-module_init(e740_pcmcia_init);
-module_exit(e740_pcmcia_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_DESCRIPTION("e740 PCMCIA platform support");
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
deleted file mode 100644
index 87b6a1639d94..000000000000
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hx4700.h>
-
-#include "soc_common.h"
-
-static struct gpio gpios[] = {
-	{ GPIO114_HX4700_CF_RESET,    GPIOF_OUT_INIT_LOW,   "CF reset"        },
-	{ EGPIO4_CF_3V3_ON,           GPIOF_OUT_INIT_LOW,   "CF 3.3V enable"  },
-};
-
-static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (ret)
-		goto out;
-
-	/*
-	 * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
-	 * The asic3 default IRQ type is level trigger low level detect, exactly
-	 * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
-	 * If the IRQ type is not changed, the asic3 interrupt handler will loop
-	 * repeatedly because it is unable to clear the level trigger interrupt.
-	 */
-	irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH);
-
-	skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-	skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-out:
-	return ret;
-}
-
-static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(gpios, ARRAY_SIZE(gpios));
-}
-
-static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-	struct pcmcia_state *state)
-{
-	state->vs_3v = 1;
-	state->vs_Xv = 0;
-}
-
-static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-	const socket_state_t *state)
-{
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 0);
-		break;
-	case 33:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 1);
-		break;
-	default:
-		printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc);
-		return -EINVAL;
-	}
-
-	gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0);
-
-	return 0;
-}
-
-static struct pcmcia_low_level hx4700_pcmcia_ops = {
-	.owner          = THIS_MODULE,
-	.nr             = 1,
-	.hw_init        = hx4700_pcmcia_hw_init,
-	.hw_shutdown    = hx4700_pcmcia_hw_shutdown,
-	.socket_state   = hx4700_pcmcia_socket_state,
-	.configure_socket = hx4700_pcmcia_configure_socket,
-};
-
-static struct platform_device *hx4700_pcmcia_device;
-
-static int __init hx4700_pcmcia_init(void)
-{
-	struct platform_device *pdev;
-
-	if (!machine_is_h4700())
-		return -ENODEV;
-
-	pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1,
-		&hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops));
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	hx4700_pcmcia_device = pdev;
-
-	return 0;
-}
-
-static void __exit hx4700_pcmcia_exit(void)
-{
-	platform_device_unregister(hx4700_pcmcia_device);
-}
-
-module_init(hx4700_pcmcia_init);
-module_exit(hx4700_pcmcia_exit);
-
-MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
-MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
deleted file mode 100644
index cfff41ac9ca2..000000000000
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmld.c
- *
- * Driver for Palm LifeDrive PCMCIA
- *
- * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <mach/palmld.h>
-#include "soc_common.h"
-
-static struct gpio palmld_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMLD_PCMCIA_POWER,	GPIOF_INIT_LOW,	"PCMCIA Power" },
-	{ GPIO_NR_PALMLD_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmld_pcmcia_gpios,
-				ARRAY_SIZE(palmld_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMLD_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios));
-}
-
-static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1);
-	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET,
-			!!(state->flags & SS_RESET));
-
-	return 0;
-}
-
-static struct pcmcia_low_level palmld_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 1,
-	.nr			= 1,
-
-	.hw_init		= palmld_pcmcia_hw_init,
-	.hw_shutdown		= palmld_pcmcia_hw_shutdown,
-
-	.socket_state		= palmld_pcmcia_socket_state,
-	.configure_socket	= palmld_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmld_pcmcia_device;
-
-static int __init palmld_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmld())
-		return -ENODEV;
-
-	palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmld_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops,
-					sizeof(palmld_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmld_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmld_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmld_pcmcia_exit(void)
-{
-	platform_device_unregister(palmld_pcmcia_device);
-}
-
-module_init(palmld_pcmcia_init);
-module_exit(palmld_pcmcia_exit);
-
-MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
-	    " Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
deleted file mode 100644
index 8fe05613ed04..000000000000
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmtc.c
- *
- * Driver for Palm Tungsten|C PCMCIA
- *
- * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <mach/palmtc.h>
-#include "soc_common.h"
-
-static struct gpio palmtc_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMTC_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
-	{ GPIO_NR_PALMTC_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
-	{ GPIO_NR_PALMTC_PCMCIA_POWER3,	GPIOF_INIT_LOW,	"PCMCIA Power 3" },
-	{ GPIO_NR_PALMTC_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-	{ GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN,	"PCMCIA Power Ready" },
-};
-
-static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmtc_pcmcia_gpios,
-				ARRAY_SIZE(palmtc_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTC_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios));
-}
-
-static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int palmtc_wifi_powerdown(void)
-{
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
-	mdelay(40);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
-	return 0;
-}
-
-static int palmtc_wifi_powerup(void)
-{
-	int timeout = 50;
-
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1);
-	mdelay(50);
-
-	/* Power up the card, 1.8V first, after a while 3.3V */
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1);
-	mdelay(100);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1);
-
-	/* Wait till the card is ready */
-	while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) &&
-		timeout) {
-		mdelay(1);
-		timeout--;
-	}
-
-	/* Power down the WiFi in case of error */
-	if (!timeout) {
-		palmtc_wifi_powerdown();
-		return 1;
-	}
-
-	/* Reset the card */
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	mdelay(20);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0);
-	mdelay(25);
-
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
-
-	return 0;
-}
-
-static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	int ret = 1;
-
-	if (state->Vcc == 0)
-		ret = palmtc_wifi_powerdown();
-	else if (state->Vcc == 33)
-		ret = palmtc_wifi_powerup();
-
-	return ret;
-}
-
-static struct pcmcia_low_level palmtc_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= palmtc_pcmcia_hw_init,
-	.hw_shutdown		= palmtc_pcmcia_hw_shutdown,
-
-	.socket_state		= palmtc_pcmcia_socket_state,
-	.configure_socket	= palmtc_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmtc_pcmcia_device;
-
-static int __init palmtc_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmtc())
-		return -ENODEV;
-
-	palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmtc_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops,
-					sizeof(palmtc_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmtc_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmtc_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmtc_pcmcia_exit(void)
-{
-	platform_device_unregister(palmtc_pcmcia_device);
-}
-
-module_init(palmtc_pcmcia_init);
-module_exit(palmtc_pcmcia_exit);
-
-MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
-	    " Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
deleted file mode 100644
index c449ca72cb87..000000000000
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmtx.c
- *
- * Driver for Palm T|X PCMCIA
- *
- * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <mach/palmtx.h>
-#include "soc_common.h"
-
-static struct gpio palmtx_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMTX_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
-	{ GPIO_NR_PALMTX_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
-	{ GPIO_NR_PALMTX_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmtx_pcmcia_gpios,
-				ARRAY_SIZE(palmtx_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTX_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios));
-}
-
-static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-palmtx_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER1, 1);
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER2, 1);
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_RESET,
-			!!(state->flags & SS_RESET));
-
-	return 0;
-}
-
-static struct pcmcia_low_level palmtx_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= palmtx_pcmcia_hw_init,
-	.hw_shutdown		= palmtx_pcmcia_hw_shutdown,
-
-	.socket_state		= palmtx_pcmcia_socket_state,
-	.configure_socket	= palmtx_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmtx_pcmcia_device;
-
-static int __init palmtx_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmtx())
-		return -ENODEV;
-
-	palmtx_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmtx_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmtx_pcmcia_device, &palmtx_pcmcia_ops,
-					sizeof(palmtx_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmtx_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmtx_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmtx_pcmcia_exit(void)
-{
-	platform_device_unregister(palmtx_pcmcia_device);
-}
-
-module_init(palmtx_pcmcia_init);
-module_exit(palmtx_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm T|X");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 5fdd25a9e28e..b3ba858f70cb 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -15,11 +15,10 @@
 #include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/hardware/scoop.h>
 
-#include "soc_common.h"
+#include <pcmcia/soc_common.h>
 
 #define	NO_KEEP_VS 0x0001
 #define SCOOP_DEV platform_scoop_config->devs
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
deleted file mode 100644
index 6db8fe880ed4..000000000000
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_trizeps4.c
- *
- * TRIZEPS PCMCIA specific routines.
- *
- * Author:	Jürgen Schindele
- * Created:	20 02, 2006
- * Copyright:	Jürgen Schindele
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <mach/pxa2xx-regs.h>
-#include <mach/trizeps4.h>
-
-#include "soc_common.h"
-
-extern void board_pcmcia_power(int power);
-
-static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	/* we dont have voltage/card/ready detection
-	 * so we dont need interrupts for it
-	 */
-	switch (skt->nr) {
-	case 0:
-		skt->stat[SOC_STAT_CD].gpio = GPIO_PCD;
-		skt->stat[SOC_STAT_CD].name = "cs0_cd";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY;
-		skt->stat[SOC_STAT_RDY].name = "cs0_rdy";
-		break;
-	default:
-		break;
-	}
-	/* release the reset of this card */
-	pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq);
-
-	return 0;
-}
-
-static unsigned long trizeps_pcmcia_status[2];
-
-static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				struct pcmcia_state *state)
-{
-	unsigned short status = 0, change;
-	status = CFSR_readw();
-	change = (status ^ trizeps_pcmcia_status[skt->nr]) &
-				ConXS_CFSR_BVD_MASK;
-	if (change) {
-		trizeps_pcmcia_status[skt->nr] = status;
-		if (status & ConXS_CFSR_BVD1) {
-			/* enable_irq empty */
-		} else {
-			/* disable_irq empty */
-		}
-	}
-
-	switch (skt->nr) {
-	case 0:
-		/* just fill in fix states */
-		state->bvd1   = (status & ConXS_CFSR_BVD1) ? 1 : 0;
-		state->bvd2   = (status & ConXS_CFSR_BVD2) ? 1 : 0;
-		state->vs_3v  = (status & ConXS_CFSR_VS1) ? 0 : 1;
-		state->vs_Xv  = (status & ConXS_CFSR_VS2) ? 0 : 1;
-		break;
-
-#ifndef CONFIG_MACH_TRIZEPS_CONXS
-	/* on ConXS we only have one slot. Second is inactive */
-	case 1:
-		state->detect = 0;
-		state->ready  = 0;
-		state->bvd1   = 0;
-		state->bvd2   = 0;
-		state->vs_3v  = 0;
-		state->vs_Xv  = 0;
-		break;
-
-#endif
-	}
-}
-
-static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	int ret = 0;
-	unsigned short power = 0;
-
-	/* we do nothing here just check a bit */
-	switch (state->Vcc) {
-	case 0:  power &= 0xfc; break;
-	case 33: power |= ConXS_BCR_S0_VCC_3V3; break;
-	case 50:
-		pr_err("%s(): Vcc 5V not supported in socket\n", __func__);
-		break;
-	default:
-		pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc);
-		ret = -1;
-	}
-
-	switch (state->Vpp) {
-	case 0:  power &= 0xf3; break;
-	case 33: power |= ConXS_BCR_S0_VPP_3V3; break;
-	case 120:
-		pr_err("%s(): Vpp 12V not supported in socket\n", __func__);
-		break;
-	default:
-		if (state->Vpp != state->Vcc) {
-			pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp);
-			ret = -1;
-		}
-	}
-
-	switch (skt->nr) {
-	case 0:			 /* we only have 3.3V */
-		board_pcmcia_power(power);
-		break;
-
-#ifndef CONFIG_MACH_TRIZEPS_CONXS
-	/* on ConXS we only have one slot. Second is inactive */
-	case 1:
-#endif
-	default:
-		break;
-	}
-
-	return ret;
-}
-
-static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-{
-	/* default is on */
-	board_pcmcia_power(0x9);
-}
-
-static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
-	board_pcmcia_power(0x0);
-}
-
-static struct pcmcia_low_level trizeps_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= trizeps_pcmcia_hw_init,
-	.socket_state		= trizeps_pcmcia_socket_state,
-	.configure_socket	= trizeps_pcmcia_configure_socket,
-	.socket_init		= trizeps_pcmcia_socket_init,
-	.socket_suspend		= trizeps_pcmcia_socket_suspend,
-#ifdef CONFIG_MACH_TRIZEPS_CONXS
-	.nr			= 1,
-#else
-	.nr			= 2,
-#endif
-	.first			= 0,
-};
-
-static struct platform_device *trizeps_pcmcia_device;
-
-static int __init trizeps_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_trizeps4() && !machine_is_trizeps4wl())
-		return -ENODEV;
-
-	trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!trizeps_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(trizeps_pcmcia_device,
-			&trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops));
-
-	if (ret == 0)
-		ret = platform_device_add(trizeps_pcmcia_device);
-
-	if (ret)
-		platform_device_put(trizeps_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit trizeps_pcmcia_exit(void)
-{
-	platform_device_unregister(trizeps_pcmcia_device);
-}
-
-fs_initcall(trizeps_pcmcia_init);
-module_exit(trizeps_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Juergen Schindele");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
deleted file mode 100644
index 7ac6647d286e..000000000000
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Viper/Zeus PCMCIA support
- *   Copyright 2004 Arcom Control Systems
- *
- * Maintained by Marc Zyngier <maz@misterjones.org>
- *
- * Based on:
- *   iPAQ h2200 PCMCIA support
- *   Copyright 2004 Koen Kooi <koen@vestingbar.nl>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <pcmcia/ss.h>
-
-#include <asm/irq.h>
-
-#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
-
-#include "soc_common.h"
-#include "pxa2xx_base.h"
-
-static struct platform_device *arcom_pcmcia_dev;
-
-static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
-{
-	return arcom_pcmcia_dev->dev.platform_data;
-}
-
-static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-	unsigned long flags;
-
-	skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA_CD";
-	skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio;
-	skt->stat[SOC_STAT_RDY].name = "CF ready";
-
-	if (gpio_request(pdata->pwr_gpio, "CF power"))
-		goto err_request_pwr;
-
-	local_irq_save(flags);
-
-	if (gpio_direction_output(pdata->pwr_gpio, 0)) {
-		local_irq_restore(flags);
-		goto err_dir;
-	}
-
-	local_irq_restore(flags);
-
-	return 0;
-
-err_dir:
-	gpio_free(pdata->pwr_gpio);
-err_request_pwr:
-	dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
-	return -1;
-}
-
-/*
- * Release all resources.
- */
-static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-
-	gpio_free(pdata->pwr_gpio);
-}
-
-static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				      struct pcmcia_state *state)
-{
-	state->vs_3v  = 1; /* Can only apply 3.3V */
-	state->vs_Xv  = 0;
-}
-
-static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					 const socket_state_t *state)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-
-	/* Silently ignore Vpp, output enable, speaker enable. */
-	pdata->reset(state->flags & SS_RESET);
-
-	/* Apply socket voltage */
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(pdata->pwr_gpio, 0);
-		break;
-	case 33:
-		gpio_set_value(pdata->pwr_gpio, 1);
-		break;
-	default:
-		dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
-		return -1;
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level viper_pcmcia_ops = {
-	.owner          	= THIS_MODULE,
-	.hw_init        	= viper_pcmcia_hw_init,
-	.hw_shutdown		= viper_pcmcia_hw_shutdown,
-	.socket_state		= viper_pcmcia_socket_state,
-	.configure_socket	= viper_pcmcia_configure_socket,
-	.nr         		= 1,
-};
-
-static struct platform_device *viper_pcmcia_device;
-
-static int viper_pcmcia_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	/* I can't imagine more than one device, but you never know... */
-	if (arcom_pcmcia_dev)
-		return -EEXIST;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!viper_pcmcia_device)
-		return -ENOMEM;
-
-	arcom_pcmcia_dev = pdev;
-
-	viper_pcmcia_device->dev.parent = &pdev->dev;
-
-	ret = platform_device_add_data(viper_pcmcia_device,
-				       &viper_pcmcia_ops,
-				       sizeof(viper_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(viper_pcmcia_device);
-
-	if (ret) {
-		platform_device_put(viper_pcmcia_device);
-		arcom_pcmcia_dev = NULL;
-	}
-
-	return ret;
-}
-
-static int viper_pcmcia_remove(struct platform_device *pdev)
-{
-	platform_device_unregister(viper_pcmcia_device);
-	arcom_pcmcia_dev = NULL;
-	return 0;
-}
-
-static struct platform_device_id viper_pcmcia_id_table[] = {
-	{ .name = "viper-pcmcia", },
-	{ .name = "zeus-pcmcia",  },
-	{ },
-};
-
-static struct platform_driver viper_pcmcia_driver = {
-	.probe		= viper_pcmcia_probe,
-	.remove		= viper_pcmcia_remove,
-	.driver		= {
-		.name	= "arcom-pcmcia",
-	},
-	.id_table	= viper_pcmcia_id_table,
-};
-
-module_platform_driver(viper_pcmcia_driver);
-
-MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
deleted file mode 100644
index 3565add03a5e..000000000000
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_vpac270.c
- *
- * Driver for Voipac PXA270 PCMCIA and CF sockets
- *
- * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/vpac270.h>
-
-#include "soc_common.h"
-
-static struct gpio vpac270_pcmcia_gpios[] = {
-	{ GPIO107_VPAC270_PCMCIA_PPEN,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
-	{ GPIO11_VPAC270_PCMCIA_RESET,	GPIOF_INIT_LOW,	"PCMCIA Reset" },
-};
-
-static struct gpio vpac270_cf_gpios[] = {
-	{ GPIO16_VPAC270_CF_RESET,	GPIOF_INIT_LOW,	"CF Reset" },
-};
-
-static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	if (skt->nr == 0) {
-		ret = gpio_request_array(vpac270_pcmcia_gpios,
-				ARRAY_SIZE(vpac270_pcmcia_gpios));
-
-		skt->stat[SOC_STAT_CD].gpio = GPIO84_VPAC270_PCMCIA_CD;
-		skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO35_VPAC270_PCMCIA_RDY;
-		skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-	} else {
-		ret = gpio_request_array(vpac270_cf_gpios,
-				ARRAY_SIZE(vpac270_cf_gpios));
-
-		skt->stat[SOC_STAT_CD].gpio = GPIO17_VPAC270_CF_CD;
-		skt->stat[SOC_STAT_CD].name = "CF CD";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO12_VPAC270_CF_RDY;
-		skt->stat[SOC_STAT_RDY].name = "CF Ready";
-	}
-
-	return ret;
-}
-
-static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	if (skt->nr == 0)
-		gpio_free_array(vpac270_pcmcia_gpios,
-					ARRAY_SIZE(vpac270_pcmcia_gpios));
-	else
-		gpio_free_array(vpac270_cf_gpios,
-					ARRAY_SIZE(vpac270_cf_gpios));
-}
-
-static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	if (skt->nr == 0) {
-		gpio_set_value(GPIO11_VPAC270_PCMCIA_RESET,
-			(state->flags & SS_RESET));
-		gpio_set_value(GPIO107_VPAC270_PCMCIA_PPEN,
-			!(state->Vcc == 33 || state->Vcc == 50));
-	} else {
-		gpio_set_value(GPIO16_VPAC270_CF_RESET,
-			(state->flags & SS_RESET));
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level vpac270_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 2,
-
-	.hw_init		= vpac270_pcmcia_hw_init,
-	.hw_shutdown		= vpac270_pcmcia_hw_shutdown,
-
-	.socket_state		= vpac270_pcmcia_socket_state,
-	.configure_socket	= vpac270_pcmcia_configure_socket,
-};
-
-static struct platform_device *vpac270_pcmcia_device;
-
-static int __init vpac270_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_vpac270())
-		return -ENODEV;
-
-	vpac270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!vpac270_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(vpac270_pcmcia_device,
-		&vpac270_pcmcia_ops, sizeof(vpac270_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(vpac270_pcmcia_device);
-
-	if (ret)
-		platform_device_put(vpac270_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit vpac270_pcmcia_exit(void)
-{
-	platform_device_unregister(vpac270_pcmcia_device);
-}
-
-module_init(vpac270_pcmcia_init);
-module_exit(vpac270_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Voipac PXA270");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 29fdd174bc23..bce664bbdc98 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -17,7 +17,6 @@
 
 #include <pcmcia/ss.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
index 7feb8d61c639..f1b5160cb8fa 100644
--- a/drivers/pcmcia/sa1111_lubbock.c
+++ b/drivers/pcmcia/sa1111_lubbock.c
@@ -17,7 +17,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 3a8c84bb174d..61b0c8952bb5 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -46,8 +46,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
 #include <linux/timer.h>
-
-#include <mach/hardware.h>
+#include <linux/pci.h>
 
 #include "soc_common.h"
 
@@ -784,8 +783,7 @@ void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt)
 	/* should not be required; violates some lowlevel drivers */
 	soc_common_pcmcia_config_skt(skt, &dead_socket);
 
-	iounmap(skt->virt_io);
-	skt->virt_io = NULL;
+	iounmap(PCI_IOBASE + skt->res_io_io.start);
 	release_resource(&skt->res_attr);
 	release_resource(&skt->res_mem);
 	release_resource(&skt->res_io);
@@ -818,11 +816,12 @@ int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt)
 	if (ret)
 		goto out_err_4;
 
-	skt->virt_io = ioremap(skt->res_io.start, 0x10000);
-	if (skt->virt_io == NULL) {
-		ret = -ENOMEM;
+	skt->res_io_io = (struct resource)
+		 DEFINE_RES_IO_NAMED(skt->nr * 0x1000 + 0x10000, 0x1000,
+				     "PCMCIA I/O");
+	ret = pci_remap_iospace(&skt->res_io_io, skt->res_io.start);
+	if (ret)
 		goto out_err_5;
-	}
 
 	/*
 	 * We initialize default socket timing here, because
@@ -840,7 +839,7 @@ int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt)
 	skt->socket.resource_ops = &pccard_static_ops;
 	skt->socket.irq_mask = 0;
 	skt->socket.map_size = PAGE_SIZE;
-	skt->socket.io_offset = (unsigned long)skt->virt_io;
+	skt->socket.io_offset = (unsigned long)skt->res_io_io.start;
 
 	skt->status = soc_common_pcmcia_skt_state(skt);
 
@@ -874,7 +873,7 @@ int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt)
  out_err_7:
 	soc_pcmcia_hw_shutdown(skt);
  out_err_6:
-	iounmap(skt->virt_io);
+	iounmap(PCI_IOBASE + skt->res_io_io.start);
  out_err_5:
 	release_resource(&skt->res_attr);
  out_err_4:
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 222e81c79365..17ef05aa8afe 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -13,137 +13,19 @@
 /* include the world */
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
-#include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
-
+#include <pcmcia/soc_common.h>
 
 struct device;
 struct gpio_desc;
 struct pcmcia_low_level;
 struct regulator;
 
-struct soc_pcmcia_regulator {
-	struct regulator	*reg;
-	bool			on;
-};
-
-/*
- * This structure encapsulates per-socket state which we might need to
- * use when responding to a Card Services query of some kind.
- */
-struct soc_pcmcia_socket {
-	struct pcmcia_socket	socket;
-
-	/*
-	 * Info from low level handler
-	 */
-	unsigned int		nr;
-	struct clk		*clk;
-
-	/*
-	 * Core PCMCIA state
-	 */
-	const struct pcmcia_low_level *ops;
-
-	unsigned int		status;
-	socket_state_t		cs_state;
-
-	unsigned short		spd_io[MAX_IO_WIN];
-	unsigned short		spd_mem[MAX_WIN];
-	unsigned short		spd_attr[MAX_WIN];
-
-	struct resource		res_skt;
-	struct resource		res_io;
-	struct resource		res_mem;
-	struct resource		res_attr;
-	void __iomem		*virt_io;
-
-	struct {
-		int		gpio;
-		struct gpio_desc *desc;
-		unsigned int	irq;
-		const char	*name;
-	} stat[6];
-#define SOC_STAT_CD		0	/* Card detect */
-#define SOC_STAT_BVD1		1	/* BATDEAD / IOSTSCHG */
-#define SOC_STAT_BVD2		2	/* BATWARN / IOSPKR */
-#define SOC_STAT_RDY		3	/* Ready / Interrupt */
-#define SOC_STAT_VS1		4	/* Voltage sense 1 */
-#define SOC_STAT_VS2		5	/* Voltage sense 2 */
-
-	struct gpio_desc	*gpio_reset;
-	struct gpio_desc	*gpio_bus_enable;
-	struct soc_pcmcia_regulator vcc;
-	struct soc_pcmcia_regulator vpp;
-
-	unsigned int		irq_state;
-
-#ifdef CONFIG_CPU_FREQ
-	struct notifier_block	cpufreq_nb;
-#endif
-	struct timer_list	poll_timer;
-	struct list_head	node;
-	void *driver_data;
-};
-
 struct skt_dev_info {
 	int nskt;
 	struct soc_pcmcia_socket skt[];
 };
 
-struct pcmcia_state {
-  unsigned detect: 1,
-            ready: 1,
-             bvd1: 1,
-             bvd2: 1,
-           wrprot: 1,
-            vs_3v: 1,
-            vs_Xv: 1;
-};
-
-struct pcmcia_low_level {
-	struct module *owner;
-
-	/* first socket in system */
-	int first;
-	/* nr of sockets */
-	int nr;
-
-	int (*hw_init)(struct soc_pcmcia_socket *);
-	void (*hw_shutdown)(struct soc_pcmcia_socket *);
-
-	void (*socket_state)(struct soc_pcmcia_socket *, struct pcmcia_state *);
-	int (*configure_socket)(struct soc_pcmcia_socket *, const socket_state_t *);
-
-	/*
-	 * Enable card status IRQs on (re-)initialisation.  This can
-	 * be called at initialisation, power management event, or
-	 * pcmcia event.
-	 */
-	void (*socket_init)(struct soc_pcmcia_socket *);
-
-	/*
-	 * Disable card status IRQs and PCMCIA bus on suspend.
-	 */
-	void (*socket_suspend)(struct soc_pcmcia_socket *);
-
-	/*
-	 * Hardware specific timing routines.
-	 * If provided, the get_timing routine overrides the SOC default.
-	 */
-	unsigned int (*get_timing)(struct soc_pcmcia_socket *, unsigned int, unsigned int);
-	int (*set_timing)(struct soc_pcmcia_socket *);
-	int (*show_timing)(struct soc_pcmcia_socket *, char *);
-
-#ifdef CONFIG_CPU_FREQ
-	/*
-	 * CPUFREQ support.
-	 */
-	int (*frequency_change)(struct soc_pcmcia_socket *, unsigned long, struct cpufreq_freqs *);
-#endif
-};
-
-
 struct soc_pcmcia_timing {
 	unsigned short io;
 	unsigned short mem;