summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k
AgeCommit message (Collapse)AuthorFilesLines
2022-04-20ath9k: Fix usage of driver-private space in tx_infoToke Høiland-Jørgensen2-11/+21
commit 5a6b06f5927c940fa44026695779c30b7536474c upstream. The ieee80211_tx_info_clear_status() helper also clears the rate counts and the driver-private part of struct ieee80211_tx_info, so using it breaks quite a few other things. So back out of using it, and instead define a ath-internal helper that only clears the area between the status_driver_data and the rates info. Combined with moving the ath_frame_info struct to status_driver_data, this avoids clearing anything we shouldn't be, and so we can keep the existing code for handling the rate information. While fixing this I also noticed that the setting of tx_info->status.rates[tx_rateindex].count on hardware underrun errors was always immediately overridden by the normal setting of the same fields, so rearrange the code so that the underrun detection actually takes effect. The new helper could be generalised to a 'memset_between()' helper, but leave it as a driver-internal helper for now since this needs to go to stable. Cc: stable@vger.kernel.org Reported-by: Peter Seiderer <ps.report@gmx.net> Fixes: 037250f0a45c ("ath9k: Properly clear TX status area before reporting to mac80211") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Peter Seiderer <ps.report@gmx.net> Tested-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220404204800.2681133-1-toke@toke.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ath9k: Properly clear TX status area before reporting to mac80211Toke Høiland-Jørgensen1-3/+2
commit 037250f0a45cf9ecf5b52d4b9ff8eadeb609c800 upstream. The ath9k driver was not properly clearing the status area in the ieee80211_tx_info struct before reporting TX status to mac80211. Instead, it was manually filling in fields, which meant that fields introduced later were left as-is. Conveniently, mac80211 actually provides a helper to zero out the status area, so use that to make sure we zero everything. The last commit touching the driver function writing the status information seems to have actually been fixing an issue that was also caused by the area being uninitialised; but it only added clearing of a single field instead of the whole struct. That is now redundant, though, so revert that commit and use it as a convenient Fixes tag. Fixes: cc591d77aba1 ("ath9k: Make sure to zero status.tx_time before reporting TX status") Reported-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220330164409.16645-1-toke@toke.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08ath9k_htc: fix uninit value bugsPavel Skripkin1-0/+5
[ Upstream commit d1e0df1c57bd30871dd1c855742a7c346dbca853 ] Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing field initialization. In htc_connect_service() svc_meta_len and pad are not initialized. Based on code it looks like in current skb there is no service data, so simply initialize svc_meta_len to 0. htc_issue_send() does not initialize htc_frame_hdr::control array. Based on firmware code, it will initialize it by itself, so simply zero whole array to make KMSAN happy Fail logs: BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 4-7 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00 BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 16-17 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00 Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Reported-by: syzbot+f83a1df1ed4f67e8d8ad@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220115122733.11160-1-paskripkin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_streamZekun Shen1-0/+7
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ] Large pkt_len can lead to out-out-bound memcpy. Current ath9k_hif_usb_rx_stream allows combining the content of two urb inputs to one pkt. The first input can indicate the size of the pkt. Any remaining size is saved in hif_dev->rx_remain_len. While processing the next input, memcpy is used with rx_remain_len. 4-byte pkt_len can go up to 0xffff, while a single input is 0x4000 maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE. BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 Workqueue: events request_firmware_work_func Call Trace: <IRQ> dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] __kasan_report.cold+0x37/0x7c ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] kasan_report+0xe/0x20 check_memory_region+0x15a/0x1d0 memcpy+0x20/0x50 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc] ? _raw_spin_lock_irqsave+0x7b/0xd0 ? _raw_spin_trylock_bh+0x120/0x120 ? __usb_unanchor_urb+0x12f/0x210 __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU emulation, I found the KASAN report. The bug is triggerable whenever pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes to test the driver works when applying the patch. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()Tetsuo Handa3-0/+10
[ Upstream commit 8b3046abc99eefe11438090bcc4ec3a3994b55d0 ] syzbot is reporting lockdep warning at ath9k_wmi_event_tasklet() followed by kernel panic at get_htc_epid_queue() from ath9k_htc_tx_get_packet() from ath9k_htc_txstatus() [1], for ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) depends on spin_lock_init() from ath9k_init_priv() being already completed. Since ath9k_wmi_event_tasklet() is set by ath9k_init_wmi() from ath9k_htc_probe_device(), it is possible that ath9k_wmi_event_tasklet() is called via tasklet interrupt before spin_lock_init() from ath9k_init_priv() from ath9k_init_device() from ath9k_htc_probe_device() is called. Let's hold ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) no-op until ath9k_tx_init() completes. Link: https://syzkaller.appspot.com/bug?extid=31d54c60c5b254d6f75b [1] Reported-by: syzbot <syzbot+31d54c60c5b254d6f75b@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+31d54c60c5b254d6f75b@syzkaller.appspotmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/77b76ac8-2bee-6444-d26c-8c30858b8daa@i-love.sakura.ne.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath9k_htc: fix NULL pointer dereference at ath9k_htc_rxep()Tetsuo Handa2-0/+9
[ Upstream commit b0ec7e55fce65f125bd1d7f02e2dc4de62abee34 ] syzbot is reporting lockdep warning followed by kernel panic at ath9k_htc_rxep() [1], for ath9k_htc_rxep() depends on ath9k_rx_init() being already completed. Since ath9k_htc_rxep() is set by ath9k_htc_connect_svc(WMI_BEACON_SVC) from ath9k_init_htc_services(), it is possible that ath9k_htc_rxep() is called via timer interrupt before ath9k_rx_init() from ath9k_init_device() is called. Since we can't call ath9k_init_device() before ath9k_init_htc_services(), let's hold ath9k_htc_rxep() no-op until ath9k_rx_init() completes. Link: https://syzkaller.appspot.com/bug?extid=4d2d56175b934b9a7bf9 [1] Reported-by: syzbot <syzbot+4d2d56175b934b9a7bf9@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+4d2d56175b934b9a7bf9@syzkaller.appspotmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/2b88f416-b2cb-7a18-d688-951e6dc3fe92@i-love.sakura.ne.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ath9k: Fix potential interrupt storm on queue resetLinus Lüssing1-1/+3
[ Upstream commit 4925642d541278575ad1948c5924d71ffd57ef14 ] In tests with two Lima boards from 8devices (QCA4531 based) on OpenWrt 19.07 we could force a silent restart of a device with no serial output when we were sending a high amount of UDP traffic (iperf3 at 80 MBit/s in both directions from external hosts, saturating the wifi and causing a load of about 4.5 to 6) and were then triggering an ath9k_queue_reset(). Further debugging showed that the restart was caused by the ath79 watchdog. With disabled watchdog we could observe that the device was constantly going into ath_isr() interrupt handler and was returning early after the ATH_OP_HW_RESET flag test, without clearing any interrupts. Even though ath9k_queue_reset() calls ath9k_hw_kill_interrupts(). With JTAG we could observe the following race condition: 1) ath9k_queue_reset() ... -> ath9k_hw_kill_interrupts() -> set_bit(ATH_OP_HW_RESET, &common->op_flags); ... <- returns 2) ath9k_tasklet() ... -> ath9k_hw_resume_interrupts() ... <- returns 3) loops around: ... handle_int() -> ath_isr() ... -> if (test_bit(ATH_OP_HW_RESET, &common->op_flags)) return IRQ_HANDLED; x) ath_reset_internal(): => never reached <= And in ath_isr() we would typically see the following interrupts / interrupt causes: * status: 0x00111030 or 0x00110030 * async_cause: 2 (AR_INTR_MAC_IPQ) * sync_cause: 0 So the ath9k_tasklet() reenables the ath9k interrupts through ath9k_hw_resume_interrupts() which ath9k_queue_reset() had just disabled. And ath_isr() then keeps firing because it returns IRQ_HANDLED without actually clearing the interrupt. To fix this IRQ storm also clear/disable the interrupts again when we are in reset state. Cc: Sven Eckelmann <sven@narfation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Linus Lüssing <linus.luessing@c0d3.blue> Fixes: 872b5d814f99 ("ath9k: do not access hardware on IRQs during reset") Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914192515.9273-3-linus.luessing@c0d3.blue Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-29ath9k: fix sleeping in atomic contextMiaoqing Pan1-5/+7
The problem is that gpio_free() can sleep and the cfg_soc() can be called with spinlocks held. One problematic call tree is: --> ath_reset_internal() takes &sc->sc_pcu_lock spin lock --> ath9k_hw_reset() --> ath9k_hw_gpio_request_in() --> ath9k_hw_gpio_request() --> ath9k_hw_gpio_cfg_soc() Remove gpio_free(), use error message instead, so we should make sure there is no GPIO conflict. Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(), as gpio_mask will never be set for SOC chips. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
2021-08-29ath9k: fix OOB read ar9300_eeprom_restore_internalZekun Shen1-1/+2
Bad header can have large length field which can cause OOB. cptr is the last bytes for read, and the eeprom is parsed from high to low address. The OOB, triggered by the condition length > cptr could cause memory error with a read on negative index. There are some sanity check around length, but it is not compared with cptr (the remaining bytes). Here, the corrupted/bad EEPROM can cause panic. I was able to reproduce the crash, but I cannot find the log and the reproducer now. After I applied the patch, the bug is no longer reproducible. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
2021-07-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo1-7/+1
ath.git patches for v5.15. Major changes: ath5k, ath9k, ath10k, ath11k: * switch from 'pci_' to 'dma_' API
2021-07-02ath: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-7/+1
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. While at it, some 'dma_set_mask()/dma_set_coherent_mask()' have been updated to a much less verbose 'dma_set_mask_and_coherent()'. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/9150bd6cde9ad592aff8ee3ad94dffa90b004e89.1624720959.git.christophe.jaillet@wanadoo.fr
2021-06-23mac80211: notify driver on mgd TX completionJohannes Berg1-1/+1
We have mgd_prepare_tx(), but sometimes drivers may want/need to take action when the exchange finishes, whether successfully or not. Add a notification to the driver on completion, i.e. call the new method mgd_complete_tx(). To unify the two scenarios, and to add more information, make both of them take a struct that has the duration (prepare only), subtype (both) and success (complete only). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-12ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()Pali Rohár1-0/+5
I got this crash more times during debugging of PCIe controller and crash happens somehow at the time when PCIe kernel code started link retraining (as part of ASPM code) when at the same time PCIe link went down and ath9k probably executed hw reset procedure. Currently I'm not able to reproduce this issue as it looks like to be some race condition between link training, ASPM, link down and reset path. And as always, race conditions which depends on more input parameters are hard to reproduce as it depends on precise timings. But it is clear that pointers are zero in this case and should be properly filled as same code pattern is used in ath9k_stop() function. Anyway I was able to reproduce this crash by manually triggering ath reset worker prior putting card up. I created simple patch to export reset functionality via debugfs and use it to "simulate" of triggering reset. s proved that NULL-pointer dereference issue is there. Function ath9k_hw_reset() is dereferencing chan structure pointer, so it needs to be non-NULL pointer. Function ath9k_stop() already contains code which sets ah->curchan to valid non-NULL pointer prior calling ath9k_hw_reset() function. Add same code pattern also into ath_reset_internal() function to prevent kernel NULL pointer dereference in ath9k_hw_reset() function. This change fixes kernel NULL pointer dereference in ath9k_hw_reset() which is caused by calling ath9k_hw_reset() from ath_reset_internal() with NULL chan structure. [ 45.334305] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 45.344417] Mem abort info: [ 45.347301] ESR = 0x96000005 [ 45.350448] EC = 0x25: DABT (current EL), IL = 32 bits [ 45.356166] SET = 0, FnV = 0 [ 45.359350] EA = 0, S1PTW = 0 [ 45.362596] Data abort info: [ 45.365756] ISV = 0, ISS = 0x00000005 [ 45.369735] CM = 0, WnR = 0 [ 45.372814] user pgtable: 4k pages, 39-bit VAs, pgdp=000000000685d000 [ 45.379663] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 45.388856] Internal error: Oops: 96000005 [#1] SMP [ 45.393897] Modules linked in: ath9k ath9k_common ath9k_hw [ 45.399574] CPU: 1 PID: 309 Comm: kworker/u4:2 Not tainted 5.12.0-rc2-dirty #785 [ 45.414746] Workqueue: phy0 ath_reset_work [ath9k] [ 45.419713] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 45.425910] pc : ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw] [ 45.431234] lr : ath9k_hw_reset+0xc0/0x1c48 [ath9k_hw] [ 45.436548] sp : ffffffc0118dbca0 [ 45.439961] x29: ffffffc0118dbca0 x28: 0000000000000000 [ 45.445442] x27: ffffff800dee4080 x26: 0000000000000000 [ 45.450923] x25: ffffff800df9b9d8 x24: 0000000000000000 [ 45.456404] x23: ffffffc0115f6000 x22: ffffffc008d0d408 [ 45.461885] x21: ffffff800dee5080 x20: ffffff800df9b9d8 [ 45.467366] x19: 0000000000000000 x18: 0000000000000000 [ 45.472846] x17: 0000000000000000 x16: 0000000000000000 [ 45.478326] x15: 0000000000000010 x14: ffffffffffffffff [ 45.483807] x13: ffffffc0918db94f x12: ffffffc011498720 [ 45.489289] x11: 0000000000000003 x10: ffffffc0114806e0 [ 45.494770] x9 : ffffffc01014b2ec x8 : 0000000000017fe8 [ 45.500251] x7 : c0000000ffffefff x6 : 0000000000000001 [ 45.505733] x5 : 0000000000000000 x4 : 0000000000000000 [ 45.511213] x3 : 0000000000000000 x2 : ffffff801fece870 [ 45.516693] x1 : ffffffc00eded000 x0 : 000000000000003f [ 45.522174] Call trace: [ 45.524695] ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw] [ 45.529653] ath_reset_internal+0x1a8/0x2b8 [ath9k] [ 45.534696] ath_reset_work+0x2c/0x40 [ath9k] [ 45.539198] process_one_work+0x210/0x480 [ 45.543339] worker_thread+0x5c/0x510 [ 45.547115] kthread+0x12c/0x130 [ 45.550445] ret_from_fork+0x10/0x1c [ 45.554138] Code: 910922c2 9117e021 95ff0398 b4000294 (b9400a61) [ 45.560430] ---[ end trace 566410ba90b50e8b ]--- [ 45.565193] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 45.572282] SMP: stopping secondary CPUs [ 45.576331] Kernel Offset: disabled [ 45.579924] CPU features: 0x00040002,0000200c [ 45.584416] Memory Limit: none [ 45.587564] Rebooting in 3 seconds.. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210402122653.24014-1-pali@kernel.org
2021-05-30ath9k: ar9003_mac: read STBC indicator from rx descriptorPhilipp Borgers1-0/+2
The rx descriptor contains a STBC indicator. If the indicator is set the frame was received with STBC. Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210517172426.15919-1-borgers@mi.fu-berlin.de
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds3-6/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-26Merge tag 'irq-core-2021-04-26' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual updates from the irq departement: Core changes: - Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can be cleaned up which either use a seperate mechanism to prevent auto-enable at request time or have a racy mechanism which disables the interrupt right after request. - Get rid of the last usage of irq_create_identity_mapping() and remove the interface. - An overhaul of tasklet_disable(). Most usage sites of tasklet_disable() are in task context and usually in cleanup, teardown code pathes. tasklet_disable() spinwaits for a tasklet which is currently executed. That's not only a problem for PREEMPT_RT where this can lead to a live lock when the disabling task preempts the softirq thread. It's also problematic in context of virtualization when the vCPU which runs the tasklet is scheduled out and the disabling code has to spin wait until it's scheduled back in. There are a few code pathes which invoke tasklet_disable() from non-sleepable context. For these a new disable variant which still spinwaits is provided which allows to switch tasklet_disable() to a sleep wait mechanism. For the atomic use cases this does not solve the live lock issue on PREEMPT_RT. That is mitigated by blocking on the RT specific softirq lock. - The PREEMPT_RT specific implementation of softirq processing and local_bh_disable/enable(). On RT enabled kernels soft interrupt processing happens always in task context and all interrupt handlers, which are not explicitly marked to be invoked in hard interrupt context are forced into task context as well. This allows to protect against softirq processing with a per CPU lock, which in turn allows to make BH disabled regions preemptible. Most of the softirq handling code is still shared. The RT/non-RT specific differences are addressed with a set of inline functions which provide the context specific functionality. The local_bh_disable() / local_bh_enable() mechanism are obviously seperate. - The usual set of small improvements and cleanups Driver changes: - New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt controllers - Extended functionality for MStar, STM32 and SC7280 irq chips - Enhanced robustness for ARM GICv3/4.1 drivers - The usual set of cleanups and improvements all over the place" * tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP irqchip/gic-v3: Do not enable irqs when handling spurious interrups dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller irqchip: Add support for IDT 79rc3243x interrupt controller irqdomain: Drop references to recusive irqdomain setup irqdomain: Get rid of irq_create_strict_mappings() irqchip/jcore-aic: Kill use of irq_create_strict_mappings() ARM: PXA: Kill use of irq_create_strict_mappings() irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection irqchip/tb10x: Use 'fallthrough' to eliminate a warning genirq: Reduce irqdebug cacheline bouncing kernel: Initialize cpumask before parsing irqchip/wpcm450: Drop COMPILE_TEST irqchip/irq-mst: Support polarity configuration irqchip: Add driver for WPCM450 interrupt controller dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic dt-bindings: qcom,pdc: Add compatible for sc7280 irqchip/stm32: Add usart instances exti direct event support irqchip/gic-v3: Fix OF_BAD_ADDR error handling irqchip/sifive-plic: Mark two global variables __ro_after_init ...
2021-04-22ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devicesToke Høiland-Jørgensen2-2/+2
When the error check in ath9k_hw_read_revisions() was added, it checked for -EIO which is what ath9k_regread() in the ath9k_htc driver uses. However, for plain ath9k, the register read function uses ioread32(), which just returns -1 on error. So if such a read fails, it still gets passed through and ends up as a weird mac revision in the log output. Fix this by changing ath9k_regread() to return -1 on error like ioread32() does, and fix the error check to look for that instead of -EIO. Fixes: 2f90c7e5d094 ("ath9k: Check for errors when reading SREV register") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210326180819.142480-1-toke@redhat.com
2021-04-14of: net: pass the dst buffer to of_get_mac_address()Michael Walle1-4/+1
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky2-2/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-17ath9k: Use tasklet_disable_in_atomic()Sebastian Andrzej Siewior1-1/+1
All callers of ath9k_beacon_ensure_primary_slot() are preemptible / acquire a mutex except for this callchain: spin_lock_bh(&sc->sc_pcu_lock); ath_complete_reset() -> ath9k_calculate_summary_state() -> ath9k_beacon_ensure_primary_slot() It's unclear how that can be distangled, so use tasklet_disable_in_atomic() for now. This allows tasklet_disable() to become sleepable once the remaining atomic users are cleaned up. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210309084242.313899703@linutronix.de
2021-02-18ath9k: fix transmitting to stations in dynamic SMPS modeFelix Fietkau2-1/+8
When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Cc: stable@vger.kernel.org Reported-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210214184911.96702-1-nbd@nbd.name
2021-02-13Merge tag 'wireless-drivers-next-2021-02-12' of ↵David S. Miller1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.12 Second set of patches for v5.12. Last time there was a smaller pull request so unsurprisingly this time we have a big one. mt76 has new hardware support and lots of new features, iwlwifi getting new features and rtw88 got NAPI support. And the usual cleanups and fixes all over. Major changes: ath10k * support setting SAR limits via nl80211 rtw88 * support 8821 RFE type2 devices * NAPI support iwlwifi * add new FW API support * support for new So devices * support for RF interference mitigation (RFI) * support for PNVM (Platform Non-Volatile Memory, a firmware data file) from BIOS mt76 * add new mt7921e driver * 802.11 encap offload support * support for multiple pcie gen1 host interfaces on 7915 * 7915 testmode support * 7915 txbf support brcmfmac * support for CQM RSSI notifications wil6210 * support for extended DMG MCS 12.1 rate ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ath9k: fix data bus crash when setting nf_override via debugfsLinus Lüssing1-1/+4
When trying to set the noise floor via debugfs, a "data bus error" crash like the following can happen: [ 88.433133] Data bus error, epc == 80221c28, ra == 83314e60 [ 88.438895] Oops[#1]: [ 88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0 [ 88.447174] task: 838a1c20 task.stack: 82d5e000 [ 88.451847] $ 0 : 00000000 00000030 deadc0de 83141de4 [ 88.457248] $ 4 : b810a2c4 0000a2c4 83230fd4 00000000 [ 88.462652] $ 8 : 0000000a 00000000 00000001 00000000 [ 88.468055] $12 : 7f8ef318 00000000 00000000 77f802a0 [ 88.473457] $16 : 83230080 00000002 0000001b 83230080 [ 88.478861] $20 : 83a1c3f8 00841000 77f7adb0 ffffff92 [ 88.484263] $24 : 00000fa4 77edd860 [ 88.489665] $28 : 82d5e000 82d5fda8 00000000 83314e60 [ 88.495070] Hi : 00000000 [ 88.498044] Lo : 00000000 [ 88.501040] epc : 80221c28 ioread32+0x8/0x10 [ 88.505671] ra : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw] [ 88.512049] Status: 1000fc03 KERNEL EXL IE [ 88.516369] Cause : 5080801c (ExcCode 07) [ 88.520508] PrId : 00019374 (MIPS 24Kc) [ 88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack [ 88.597894] libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic [ 88.671671] crypto_hash [ 88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc) [ 88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002 [ 88.690916] 80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858 [ 88.699553] 00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38 [ 88.708190] 82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000 [ 88.716828] 80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292 [ 88.725465] ... [ 88.727994] Call Trace: [ 88.730532] [<80221c28>] ioread32+0x8/0x10 [ 88.734765] Code: 00000000 8c820000 0000000f <03e00008> 00000000 08088708 00000000 aca40000 03e00008 [ 88.744846] [ 88.746464] ---[ end trace db226b2de1b69b9e ]--- [ 88.753477] Kernel panic - not syncing: Fatal exception [ 88.759981] Rebooting in 3 seconds.. The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not like being called when the hardware is asleep, leading to this crash. The easiest way to reproduce this is trying to set nf_override while the hardware is down: $ ip link set down dev wlan0 $ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override Fixing this crash by waking the hardware up before trying to set the noise floor. Similar to what other ath9k debugfs files do. Tested on a Lima board from 8devices, which has a QCA 4531 chipset. Fixes: b90189759a7f ("ath9k: add noise floor override option") Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@c0d3.blue
2021-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-6/+2
2021-01-28ath9k: fix build error with LEDS_CLASS=mArnd Bergmann1-6/+2
When CONFIG_ATH9K is built-in but LED support is in a loadable module, both ath9k drivers fails to link: x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_deinit_leds': gpio.c:(.text+0x36): undefined reference to `led_classdev_unregister' x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_init_leds': gpio.c:(.text+0x179): undefined reference to `led_classdev_register_ext' The problem is that the 'imply' keyword does not enforce any dependency but is only a weak hint to Kconfig to enable another symbol from a defconfig file. Change imply to a 'depends on LEDS_CLASS' that prevents the incorrect configuration but still allows building the driver without LED support. The 'select MAC80211_LEDS' is now ensures that the LED support is actually used if it is present, and the added Kconfig dependency on MAC80211_LEDS ensures that it cannot be enabled manually when it has no effect. Fixes: 197f466e93f5 ("ath9k_htc: Do not select MAC80211_LEDS by default") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210125113654.2408057-1-arnd@kernel.org
2021-01-11Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo3-4/+94
ath.git patches for v5.12. Major changes: ath9k * more robust encryption key cache management
2020-12-17ath9k: Postpone key cache entry deletion for TXQ frames reference itJouni Malinen2-1/+87
Do not delete a key cache entry that is still being referenced by pending frames in TXQs. This avoids reuse of the key cache entry while a frame might still be transmitted using it. To avoid having to do any additional operations during the main TX path operations, track pending key cache entries in a new bitmap and check whether any pending entries can be deleted before every new key add/remove operation. Also clear any remaining entries when stopping the interface. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-6-jouni@codeaurora.org
2020-12-17ath: Modify ath_key_delete() to not need full key entryJouni Malinen2-4/+3
tkip_keymap can be used internally to avoid the reference to key->cipher and with this, only the key index value itself is needed. This allows ath_key_delete() call to be postponed to be handled after the upper layer STA and key entry have already been removed. This is needed to make ath9k key cache management safer. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-5-jouni@codeaurora.org
2020-12-17ath9k: Clear key cache explicitly on disabling hardwareJouni Malinen1-0/+5
Now that ath/key.c may not be explicitly clearing keys from the key cache, clear all key cache entries when disabling hardware to make sure no keys are left behind beyond this point. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-3-jouni@codeaurora.org
2020-12-16ath9k: make relay callbacks constJani Nikula1-1/+1
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/7db0286c428f3a478dd7544afef04a3b131f1aa0.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-09ath9k_htc: adhere to the DONT_REORDER transmit flagMathy Vanhoef1-1/+6
Assure that frames with the fixed order flag are not reordered relative to each other. This is accomplished by transmitting them using a fixed priority independent of their QoS field. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201104061823.197407-6-Mathy.Vanhoef@kuleuven.be
2020-12-07ath9k: remove trailing semicolon in macro definitionTom Rix2-2/+2
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201127175336.2752730-1-trix@redhat.com
2020-12-04Merge tag 'wireless-drivers-next-2020-12-03' of ↵Jakub Kicinski7-146/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 First set of patches for v5.11. rtw88 getting improvements to work better with Bluetooth and other driver also getting some new features. mhi-ath11k-immutable branch was pulled from mhi tree to avoid conflicts with mhi tree. Major changes: rtw88 * major bluetooth co-existance improvements wilc1000 * Wi-Fi Multimedia (WMM) support ath11k * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast probe response support * qcom,ath11k-calibration-variant Device Tree setting * cold boot calibration support * new DFS region: JP wnc36xx * enable connection monitoring and keepalive in firmware ath10k * firmware IRAM recovery feature mhi * merge mhi-ath11k-immutable branch to make MHI API change go smoothly * tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits) wl1251: remove trailing semicolon in macro definition airo: remove trailing semicolon in macro definition wilc1000: added queue support for WMM wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt() wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path wilc1000: added 'ndo_set_mac_address' callback support brcmfmac: expose firmware config files through modinfo wlcore: Switch to using the new API kobj_to_dev() rtw88: coex: add feature to enhance HID coexistence performance rtw88: coex: upgrade coexistence A2DP mechanism rtw88: coex: add action for coexistence in hardware initial rtw88: coex: add function to avoid cck lock rtw88: coex: change the coexistence mechanism for WLAN connected rtw88: coex: change the coexistence mechanism for HID rtw88: coex: update AFH information while in free-run mode rtw88: coex: update the mechanism for A2DP + PAN rtw88: coex: add debug message rtw88: coex: run coexistence when WLAN entering/leaving LPS Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices" ... ==================== Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo6-145/+10
ath.git patches for v5.11. Major changes: ath11k * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast probe response support * qcom,ath11k-calibration-variant Device Tree setting * cold boot calibration support * new DFS region: JP wnc36xx * enable connection monitoring and keepalive in firmware ath10k * firmware IRAM recovery feature mhi * merge mhi-ath11k-immutable branch to make MHI API change go smoothly
2020-11-11ath9k: remove WDS codeJohannes Berg4-27/+2
The ability to reach this code was hidden behind CONFIG_WIRELESS_WDS, which was just removed. Clean up the driver accordingly. Link: https://lore.kernel.org/r/20201109105103.e1d48ee20b0a.I89f8af0d50a02ce16a922fa790d6c1908f31a496@changeid Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-10ath9k: work around false-positive gcc warningArnd Bergmann1-2/+6
gcc-10 shows a false-positive warning with CONFIG_KASAN: drivers/net/wireless/ath/ath9k/dynack.c: In function 'ath_dynack_sample_tx_ts': include/linux/etherdevice.h:290:14: warning: writing 4 bytes into a region of size 0 [-Wstringop-overflow=] 290 | *(u32 *)dst = *(const u32 *)src; | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~ Until gcc is fixed, work around this by using memcpy() in place of ether_addr_copy(). Hopefully gcc-11 will not have this problem. Link: https://godbolt.org/z/sab1MK Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97490 Signed-off-by: Arnd Bergmann <arnd@arndb.de> [kvalo@codeaurora.org: remove ifdef and add a comment] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201026213040.3889546-8-arnd@kernel.org
2020-11-07wireless: remove unneeded breakTom Rix1-1/+0
A break is not needed if it is preceded by a return Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020125841.26791-1-trix@redhat.com
2020-11-07ath9k: dynack: Demote non-compliant function headerLee Jones1-2/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'old' not described in 'ath_dynack_ewma' drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'new' not described in 'ath_dynack_ewma' Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-40-lee.jones@linaro.org
2020-11-07ath9k: ar5008_phy: Demote half completed function headersLee Jones1-12/+3
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'rfBuf' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'reg32' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'numBits' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'firstBit' not described in 'ar5008_hw_phy_modify_rx_buffer' Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-21-lee.jones@linaro.org
2020-11-07ath9k: ar9003_2p2_initvals: Remove unused const variablesLee Jones1-14/+0
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h:1734:18: warning: ‘ar9300PciePhy_clkreq_disable_L1_2p2’ defined but not used [-Wunused-const-variable=] drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h:1727:18: warning: ‘ar9300PciePhy_clkreq_enable_L1_2p2’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-14-lee.jones@linaro.org
2020-11-07ath9k: ar9485_initvals: Remove unused const variable ↵Lee Jones1-7/+0
'ar9485_fast_clock_1_1_baseband_postamble' Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9485_initvals.h:1009:18: warning: ‘ar9485_fast_clock_1_1_baseband_postamble’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-13-lee.jones@linaro.org
2020-11-07ath9k: ar9340_initvals: Remove unused const variable ↵Lee Jones1-101/+0
'ar9340Modes_ub124_tx_gain_table_1p0' Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9340_initvals.h:624:18: warning: ‘ar9340Modes_ub124_tx_gain_table_1p0’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-12-lee.jones@linaro.org
2020-11-07ath9k: ar9330_1p1_initvals: Remove unused const variable ↵Lee Jones1-7/+0
'ar9331_common_tx_gain_offset1_1' Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h:1013:18: warning: ‘ar9331_common_tx_gain_offset1_1’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-11-lee.jones@linaro.org
2020-09-29ath9k: Remove set but not used variableLi Heng1-21/+0
This addresses the following gcc warning with "make W=1": drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h:1331:18: warning: ‘ar9580_1p0_pcie_phy_clkreq_enable_L1’ defined but not used [-Wunused-const-variable=] drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h:1338:18: warning: ‘ar9580_1p0_pcie_phy_clkreq_disable_L1’ defined but not used [-Wunused-const-variable=] drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h:1345:18: warning: ‘ar9580_1p0_pcie_phy_pll_on_clkreq’ defined but not used [-Wunused-const-variable=] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Li Heng <liheng40@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600831531-8573-1-git-send-email-liheng40@huawei.com
2020-09-21ath9k: hif_usb: fix race condition between usb_get_urb() and ↵Brooke Basile1-0/+19
usb_kill_anchored_urbs() Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor systems create a race condition in which usb_kill_anchored_urbs() deallocates the URB before the completer callback is called in usb_kill_urb(), resulting in a use-after-free. To fix this, add proper lock protection to usb_kill_urb() calls that can possibly run concurrently with usb_kill_anchored_urbs(). Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf Signed-off-by: Brooke Basile <brookebasile@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com
2020-09-11Merge tag 'wireless-drivers-next-2020-09-11' of ↵David S. Miller24-170/+92
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 First set of patches for v5.10. Most noteworthy here is ath11k getting initial support for QCA6390 and IPQ6018 devices. But most of the patches are cleanup: W=1 warning fixes, fallthrough keywords, DMA API changes and tasklet API changes. Major changes: ath10k * support SDIO firmware codedumps * support station specific TID configurations ath11k * add support for IPQ6018 * add support for QCA6390 PCI devices ath9k * add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0 rekeying wcn36xx * add support for TX ack ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27mac80211: rename csa counters to countdown countersJohn Crispin2-2/+2
We want to reuse the functions and structs for other counters such as BSS color change. Rename them to more generic names. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27ath9k: Do not select MAC80211_LEDS by defaultKrzysztof Kozlowski1-3/+3
The ath9k driver hides all LEDs related code behind CONFIG_MAC80211_LEDS ifdefs so it does not really require the MAC80211_LEDS. The code builds fine. Convert the "select" into "imply" to allow disabling LED trigger when not needed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200820194049.28055-1-krzk@kernel.org
2020-08-27ath9k: ar5008_initvals: Move ar5416Bank{0,1,2,3,7} to where they are usedLee Jones2-32/+30
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar5008_initvals.h:627:18: warning: ‘ar5416Bank7’ defined but not used [-Wunused-const-variable=] 627 | static const u32 ar5416Bank7[][2] = { | ^~~~~~~~~~~ drivers/net/wireless/ath/ath9k/ar5008_initvals.h:548:18: warning: ‘ar5416Bank3’ defined but not used [-Wunused-const-variable=] 548 | static const u32 ar5416Bank3[][3] = { | ^~~~~~~~~~~ drivers/net/wireless/ath/ath9k/ar5008_initvals.h:542:18: warning: ‘ar5416Bank2’ defined but not used [-Wunused-const-variable=] 542 | static const u32 ar5416Bank2[][2] = { | ^~~~~~~~~~~ drivers/net/wireless/ath/ath9k/ar5008_initvals.h:536:18: warning: ‘ar5416Bank1’ defined but not used [-Wunused-const-variable=] 536 | static const u32 ar5416Bank1[][2] = { | ^~~~~~~~~~~ drivers/net/wireless/ath/ath9k/ar5008_initvals.h:462:18: warning: ‘ar5416Bank0’ defined but not used [-Wunused-const-variable=] 462 | static const u32 ar5416Bank0[][2] = { | ^~~~~~~~~~~ Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200826093401.1458456-27-lee.jones@linaro.org
2020-08-27ath9k: ar5008_initvals: Remove unused table entirelyLee Jones1-37/+0
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar5008_initvals.h:553:18: warning: ‘ar5416Bank6’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200826093401.1458456-26-lee.jones@linaro.org
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 00:09:17 +0300