| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 5a6b06f5927c940fa44026695779c30b7536474c upstream.
The ieee80211_tx_info_clear_status() helper also clears the rate counts and
the driver-private part of struct ieee80211_tx_info, so using it breaks
quite a few other things. So back out of using it, and instead define a
ath-internal helper that only clears the area between the
status_driver_data and the rates info. Combined with moving the
ath_frame_info struct to status_driver_data, this avoids clearing anything
we shouldn't be, and so we can keep the existing code for handling the rate
information.
While fixing this I also noticed that the setting of
tx_info->status.rates[tx_rateindex].count on hardware underrun errors was
always immediately overridden by the normal setting of the same fields, so
rearrange the code so that the underrun detection actually takes effect.
The new helper could be generalised to a 'memset_between()' helper, but
leave it as a driver-internal helper for now since this needs to go to
stable.
Cc: stable@vger.kernel.org
Reported-by: Peter Seiderer <ps.report@gmx.net>
Fixes: 037250f0a45c ("ath9k: Properly clear TX status area before reporting to mac80211")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220404204800.2681133-1-toke@toke.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 037250f0a45cf9ecf5b52d4b9ff8eadeb609c800 upstream.
The ath9k driver was not properly clearing the status area in the
ieee80211_tx_info struct before reporting TX status to mac80211. Instead,
it was manually filling in fields, which meant that fields introduced later
were left as-is.
Conveniently, mac80211 actually provides a helper to zero out the status
area, so use that to make sure we zero everything.
The last commit touching the driver function writing the status information
seems to have actually been fixing an issue that was also caused by the
area being uninitialised; but it only added clearing of a single field
instead of the whole struct. That is now redundant, though, so revert that
commit and use it as a convenient Fixes tag.
Fixes: cc591d77aba1 ("ath9k: Make sure to zero status.tx_time before reporting TX status")
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220330164409.16645-1-toke@toke.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 10cb21f4ff3f9cb36d1e1c39bf80426f02f4986a ]
This reverts commit 743b9065fe6348a5f8f5ce04869ce2d701e5e1bc.
The original commit breaks the 256 bitmap in blockack frames in AP
mode. After reverting the commit the feature works again in both AP and
mesh modes
Tested-on: IPQ8074 hw2.0 PCI WLAN.HK.2.6.0.1-00786-QCAHKSWPL_SILICONZ-1
Fixes: 743b9065fe63 ("ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax")
Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648701477-16367-1-git-send-email-quic_akolli@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3df6d74aedfdca919cca475d15dfdbc8b05c9e5d ]
If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.
I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.
[ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567
[ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[ 145.570623] Call Trace:
[ 145.570675] <TASK>
[ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[ 145.570864] ? tasklet_init+0x150/0x150
[ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[ 145.570986] ? tasklet_clear_sched+0x42/0xe0
[ 145.571042] ? tasklet_kill+0xe9/0x1b0
[ 145.571095] ? tasklet_clear_sched+0xe0/0xe0
[ 145.571148] ? irq_has_action+0x120/0x120
[ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k]
[ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k]
[ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[ 145.571553] pci_device_remove+0x9a/0x1c0
[ 145.571605] __device_release_driver+0x332/0x660
[ 145.571659] driver_detach+0x1e7/0x2c0
[ 145.571712] bus_remove_driver+0xe2/0x2d0
[ 145.571772] pci_unregister_driver+0x21/0x250
[ 145.571826] __do_sys_delete_module+0x30a/0x4b0
[ 145.571879] ? free_module+0xac0/0xac0
[ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50
[ 145.572039] ? lockdep_hardirqs_on+0x79/0x100
[ 145.572097] do_syscall_64+0x3b/0x90
[ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-2-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b4f4c56459a5c744f7f066b9fc2b54ea995030c5 ]
Mario reported that the kernel was crashing on suspend if ath11k was not able
to find a board file:
[ 473.693286] PM: Suspending system (s2idle)
[ 473.693291] printk: Suspending console(s) (use no_console_suspend to debug)
[ 474.407787] BUG: unable to handle page fault for address: 0000000000002070
[ 474.407791] #PF: supervisor read access in kernel mode
[ 474.407794] #PF: error_code(0x0000) - not-present page
[ 474.407798] PGD 0 P4D 0
[ 474.407801] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 474.407805] CPU: 2 PID: 2350 Comm: kworker/u32:14 Tainted: G W 5.16.0 #248
[...]
[ 474.407868] Call Trace:
[ 474.407870] <TASK>
[ 474.407874] ? _raw_spin_lock_irqsave+0x2a/0x60
[ 474.407882] ? lock_timer_base+0x72/0xa0
[ 474.407889] ? _raw_spin_unlock_irqrestore+0x29/0x3d
[ 474.407892] ? try_to_del_timer_sync+0x54/0x80
[ 474.407896] ath11k_dp_rx_pktlog_stop+0x49/0xc0 [ath11k]
[ 474.407912] ath11k_core_suspend+0x34/0x130 [ath11k]
[ 474.407923] ath11k_pci_pm_suspend+0x1b/0x50 [ath11k_pci]
[ 474.407928] pci_pm_suspend+0x7e/0x170
[ 474.407935] ? pci_pm_freeze+0xc0/0xc0
[ 474.407939] dpm_run_callback+0x4e/0x150
[ 474.407947] __device_suspend+0x148/0x4c0
[ 474.407951] async_suspend+0x20/0x90
dmesg-efi-164255130401001:
Oops#1 Part1
[ 474.407955] async_run_entry_fn+0x33/0x120
[ 474.407959] process_one_work+0x220/0x3f0
[ 474.407966] worker_thread+0x4a/0x3d0
[ 474.407971] kthread+0x17a/0x1a0
[ 474.407975] ? process_one_work+0x3f0/0x3f0
[ 474.407979] ? set_kthread_struct+0x40/0x40
[ 474.407983] ret_from_fork+0x22/0x30
[ 474.407991] </TASK>
The issue here is that board file loading happens after ath11k_pci_probe()
succesfully returns (ath11k initialisation happends asynchronously) and the
suspend handler is still enabled, of course failing as ath11k is not properly
initialised. Fix this by checking ATH11K_FLAG_QMI_FAIL during both suspend and
resume.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215504
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-1-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22b59cb965f79ee1accf83172441c9ca0ecb632a ]
Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix
the following kernel panic when unload/load ath11k modules
for few iterations.
[ 971.201365] Unable to handle kernel paging request at virtual address 6d97a208
[ 971.204227] pgd = 594c2919
[ 971.211478] [6d97a208] *pgd=00000000
[ 971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0
[ 971.434256] Hardware name: Generic DT based system
[ 971.440165] PC is at napi_by_id+0x10/0x40
[ 971.445019] LR is at netif_napi_add+0x160/0x1dc
[ 971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc)
[ 971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb])
[ 971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb])
[ 971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94)
[ 971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450)
[ 971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8)
[ 971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60)
[ 971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140)
[ 971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4)
[ 971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8)
[ 971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0)
[ 971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac)
[ 971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200)
[ 971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc)
[ 971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c)
[ 971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1642583973-21599-1-git-send-email-quic_vnaralas@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 564d4eceb97eaf381dd6ef6470b06377bb50c95a ]
The bug was found during fuzzing. Stacktrace locates it in
ath5k_eeprom_convert_pcal_info_5111.
When none of the curve is selected in the loop, idx can go
up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound.
pd = &chinfo[pier].pd_curves[idx];
There are many OOB writes using pd later in the code. So I
added a sanity check for idx. Checks for other loops involving
AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not
used outside the loops.
The patch is NOT tested with real device.
The following is the fuzzing report
BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
Write of size 1 at addr ffff8880174a4d60 by task modprobe/214
CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1
Call Trace:
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
__kasan_report.cold+0x37/0x7c
? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
kasan_report+0xe/0x20
ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
? apic_timer_interrupt+0xa/0x20
? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k]
ath5k_eeprom_init+0x2513/0x6290 [ath5k]
? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
? usleep_range+0xb8/0x100
? apic_timer_interrupt+0xa/0x20
? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k]
ath5k_hw_init+0xb60/0x1970 [ath5k]
ath5k_init_ah+0x6fe/0x2530 [ath5k]
? kasprintf+0xa6/0xe0
? ath5k_stop+0x140/0x140 [ath5k]
? _dev_notice+0xf6/0xf6
? apic_timer_interrupt+0xa/0x20
ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k]
? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
? mutex_lock+0x89/0xd0
? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
local_pci_probe+0xd3/0x160
pci_device_probe+0x23f/0x3e0
? pci_device_remove+0x280/0x280
? pci_device_remove+0x280/0x280
really_probe+0x209/0x5d0
Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9747a78d5f758a5284751a10aee13c30d02bd5f1 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: 727fec790ead ("ath10k: Setup the msa resources before qmi init")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220308070238.19295-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1e0df1c57bd30871dd1c855742a7c346dbca853 ]
Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.
In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.
htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy
Fail logs:
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+f83a1df1ed4f67e8d8ad@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220115122733.11160-1-paskripkin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e3fb3d4418fce5484dfe7995fcd94c18b10a431a ]
In function ath10k_wow_convert_8023_to_80211(), it will do memcpy for
the new->pattern, and currently the new->pattern and new->mask is same
with the old, then the memcpy of new->pattern will also overwrite the
old->pattern, because the header format of new->pattern is 802.11,
its length is larger than the old->pattern which is 802.3. Then the
operation of "Copy frame body" will copy a mistake value because the
body memory has been overwrite when memcpy the new->pattern.
Assign another empty value to new_pattern to avoid the overwrite issue.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Fixes: fa3440fa2fa1 ("ath10k: convert wow pattern from 802.3 to 802.11")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211222031347.25463-1-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 02a95374b5eebdbd3b6413fd7ddec151d2ea75a1 upstream.
Currently tx_params is being re-assigned with a new value and the
previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten.
The assignment operator is incorrect, the original intent was to
bit-wise or the value in. Fix this by replacing the = operator
with |= instead.
Kudos to Christian Lamparter for suggesting the correct fix.
Fixes: fe8ee9ad80b2 ("carl9170: mac80211 glue and command interface")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: <Stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220125004406.344422-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 98d504a82cc75840bec8e3c6ae0e4f411921962b upstream.
The spread of capability between the three WiFi silicon parts wcn36xx
supports is:
wcn3620 - 802.11 a/b/g
wcn3660 - 802.11 a/b/g/n
wcn3680 - 802.11 a/b/g/n/ac
We currently treat wcn3660 as wcn3620 thus limiting it to 2GHz channels.
Fix this regression by ensuring we differentiate between all three parts.
Fixes: 8490987bdb9a ("wcn36xx: Hook and identify RF_IRIS_WCN3680")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220125004046.4058284-1-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ec7ed5163c70a0d040150d2279f932c7e7c143f upstream.
This reverts commit 2dc016599cfa9672a147528ca26d70c3654a5423.
Users are reporting regressions in regulatory domain detection and
channel availability.
The problem this was trying to resolve was fixed in firmware anyway:
QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042
https://github.com/kvalo/ath10k-firmware/commit/4d382787f0efa77dba40394e0bc604f8eff82552
Link: https://bbs.archlinux.org/viewtopic.php?id=254535
Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html
Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html
Link: https://lore.kernel.org/all/1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at/
Fixes: 2dc016599cfa ("ath: add support for special 0x0 regulatory domain")
Cc: <stable@vger.kernel.org>
Cc: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200527165718.129307-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9b5948cdd7bc8d9fa31c78cbbb04382c815587f upstream.
qmi tries to allocate a large contiguous dma memory at first,
on the AMD Ryzen platform it fails, then retries with small slices.
So set flag GFP_NOWARN to avoid flooding dmesg.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210823063258.37747-1-aaron.ma@canonical.com
Cc: "Limonciello, Mario" <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d943fdad7589653065be0e20aadc6dff37725ed4 ]
Similar to the same bug in ath10k, a napi disable w/out it being enabled
will hang forever. I believe I saw this while trying rmmod after driver
had some failure on startup. Fix it by keeping state on whether napi is
enabled or not.
And, remove un-used napi pointer in ath11k driver base struct.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200903195254.29379-1-greearb@candelatech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]
Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.
4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.
BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
__kasan_report.cold+0x37/0x7c
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
kasan_report+0xe/0x20
check_memory_region+0x15a/0x1d0
memcpy+0x20/0x50
ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
? _raw_spin_lock_irqsave+0x7b/0xd0
? _raw_spin_trylock_bh+0x120/0x120
? __usb_unanchor_urb+0x12f/0x210
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __hrtimer_run_queues+0x316/0x740
? __usb_hcd_giveback_urb+0x380/0x380
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
irq_exit+0x114/0x140
smp_apic_timer_interrupt+0xde/0x380
apic_timer_interrupt+0xf/0x20
I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.
After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b3046abc99eefe11438090bcc4ec3a3994b55d0 ]
syzbot is reporting lockdep warning at ath9k_wmi_event_tasklet() followed
by kernel panic at get_htc_epid_queue() from ath9k_htc_tx_get_packet() from
ath9k_htc_txstatus() [1], for ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID)
depends on spin_lock_init() from ath9k_init_priv() being already completed.
Since ath9k_wmi_event_tasklet() is set by ath9k_init_wmi() from
ath9k_htc_probe_device(), it is possible that ath9k_wmi_event_tasklet() is
called via tasklet interrupt before spin_lock_init() from ath9k_init_priv()
from ath9k_init_device() from ath9k_htc_probe_device() is called.
Let's hold ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) no-op until
ath9k_tx_init() completes.
Link: https://syzkaller.appspot.com/bug?extid=31d54c60c5b254d6f75b [1]
Reported-by: syzbot <syzbot+31d54c60c5b254d6f75b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+31d54c60c5b254d6f75b@syzkaller.appspotmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/77b76ac8-2bee-6444-d26c-8c30858b8daa@i-love.sakura.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0ec7e55fce65f125bd1d7f02e2dc4de62abee34 ]
syzbot is reporting lockdep warning followed by kernel panic at
ath9k_htc_rxep() [1], for ath9k_htc_rxep() depends on ath9k_rx_init()
being already completed.
Since ath9k_htc_rxep() is set by ath9k_htc_connect_svc(WMI_BEACON_SVC)
from ath9k_init_htc_services(), it is possible that ath9k_htc_rxep() is
called via timer interrupt before ath9k_rx_init() from ath9k_init_device()
is called.
Since we can't call ath9k_init_device() before ath9k_init_htc_services(),
let's hold ath9k_htc_rxep() no-op until ath9k_rx_init() completes.
Link: https://syzkaller.appspot.com/bug?extid=4d2d56175b934b9a7bf9 [1]
Reported-by: syzbot <syzbot+4d2d56175b934b9a7bf9@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+4d2d56175b934b9a7bf9@syzkaller.appspotmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/2b88f416-b2cb-7a18-d688-951e6dc3fe92@i-love.sakura.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 767c94caf0efad136157110787fe221b74cb5c8a ]
With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports
below warning:
[ 166.059415] ============================================
[ 166.059416] WARNING: possible recursive locking detected
[ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O
[ 166.059420] --------------------------------------------
[ 166.059421] kworker/0:2/116 is trying to acquire lock:
[ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059440]
but task is already holding lock:
[ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059491]
other info that might help us debug this:
[ 166.059492] Possible unsafe locking scenario:
[ 166.059493] CPU0
[ 166.059494] ----
[ 166.059495] lock(&srng->lock);
[ 166.059498] lock(&srng->lock);
[ 166.059500]
*** DEADLOCK ***
[ 166.059501] May be due to missing lock nesting notation
[ 166.059502] 3 locks held by kworker/0:2/116:
[ 166.059504] #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059511] #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059517] #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059532]
stack backtrace:
[ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10
[ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019
[ 166.059539] Workqueue: events free_obj_work
[ 166.059543] Call Trace:
[ 166.059545] <IRQ>
[ 166.059547] dump_stack_lvl+0x56/0x7b
[ 166.059552] __lock_acquire+0xb9a/0x1a50
[ 166.059556] lock_acquire+0x1e2/0x330
[ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059571] _raw_spin_lock_bh+0x33/0x70
[ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k]
[ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k]
[ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k]
[ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci]
[ 166.059659] __napi_poll+0x28/0x230
[ 166.059664] net_rx_action+0x285/0x310
[ 166.059668] __do_softirq+0xe6/0x4d2
[ 166.059672] irq_exit_rcu+0xd2/0xf0
[ 166.059675] common_interrupt+0xa5/0xc0
[ 166.059678] </IRQ>
[ 166.059679] <TASK>
[ 166.059680] asm_common_interrupt+0x1e/0x40
[ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70
[ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a
[ 166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206
[ 166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006
[ 166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001
[ 166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001
[ 166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840
[ 166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001
[ 166.059704] free_debug_processing+0x257/0x3d0
[ 166.059708] ? free_obj_work+0x1f5/0x250
[ 166.059712] __slab_free+0x374/0x5a0
[ 166.059718] ? kmem_cache_free+0x2e1/0x370
[ 166.059721] ? free_obj_work+0x1f5/0x250
[ 166.059724] kmem_cache_free+0x2e1/0x370
[ 166.059727] free_obj_work+0x1f5/0x250
[ 166.059731] process_one_work+0x28b/0x660
[ 166.059735] ? process_one_work+0x660/0x660
[ 166.059738] worker_thread+0x37/0x390
[ 166.059741] ? process_one_work+0x660/0x660
[ 166.059743] kthread+0x176/0x1a0
[ 166.059746] ? set_kthread_struct+0x40/0x40
[ 166.059749] ret_from_fork+0x22/0x30
[ 166.059754] </TASK>
Since these two lockes are both initialized in ath11k_hal_srng_setup,
they are assigned with the same key. As a result lockdep suspects that
the task is trying to acquire the same lock (due to same key) while
already holding it, and thus reports the DEADLOCK warning. However as
they are different spinlock instances, the warning is false positive.
On the other hand, even no dead lock indeed, this is a major issue for
upstream regression testing as it disables lockdep functionality.
Fix it by assigning separate lock class key for each srng->lock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ]
While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed05c7cf1286d7e31e7623bce55ff135723591bf ]
When enable debug config, it print below warning while shut down wlan
interface shuh as run "ifconfig wlan0 down".
The reason is because ar->regd_update_work is ran once, and it is will
call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which
is running in workqueue of ieee80211_local queued by ieee80211_queue_work().
Another thread from "ifconfig wlan0 down" will also accuqire the lock
by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and
then it call ieee80211_stop_device() to flush_workqueue(local->workqueue),
this will wait the workqueue of ieee80211_local finished. Then deadlock
will happen easily if the two thread run meanwhile.
Below warning disappeared after this change.
[ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0)
[ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan
[ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0
[ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0
[ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0
[ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20
[ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error
[ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0
[ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0
[ 914.117583] ======================================================
[ 914.117592] WARNING: possible circular locking dependency detected
[ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE
[ 914.117611] ------------------------------------------------------
[ 914.117618] ifconfig/2805 is trying to acquire lock:
[ 914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470
[ 914.117674]
but task is already holding lock:
[ 914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[ 914.117872]
which lock already depends on the new lock.
[ 914.117880]
the existing dependency chain (in reverse order) is:
[ 914.117888]
-> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}:
[ 914.117910] __mutex_lock+0xa0/0x9c0
[ 914.117930] mutex_lock_nested+0x1b/0x20
[ 914.117944] reg_process_self_managed_hints+0x3a/0xb0 [cfg80211]
[ 914.118093] wiphy_regulatory_register+0x47/0x80 [cfg80211]
[ 914.118229] wiphy_register+0x84f/0x9c0 [cfg80211]
[ 914.118353] ieee80211_register_hw+0x6b1/0xd90 [mac80211]
[ 914.118486] ath11k_mac_register+0x6af/0xb60 [ath11k]
[ 914.118550] ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k]
[ 914.118598] ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k]
[ 914.118656] process_one_work+0x228/0x670
[ 914.118669] worker_thread+0x4d/0x440
[ 914.118680] kthread+0x16d/0x1b0
[ 914.118697] ret_from_fork+0x22/0x30
[ 914.118714]
-> #2 (rtnl_mutex){+.+.}-{4:4}:
[ 914.118736] __mutex_lock+0xa0/0x9c0
[ 914.118751] mutex_lock_nested+0x1b/0x20
[ 914.118767] rtnl_lock+0x17/0x20
[ 914.118783] ath11k_regd_update+0x15a/0x260 [ath11k]
[ 914.118841] ath11k_regd_update_work+0x15/0x20 [ath11k]
[ 914.118897] process_one_work+0x228/0x670
[ 914.118909] worker_thread+0x4d/0x440
[ 914.118920] kthread+0x16d/0x1b0
[ 914.118934] ret_from_fork+0x22/0x30
[ 914.118948]
-> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}:
[ 914.118972] process_one_work+0x1fa/0x670
[ 914.118984] worker_thread+0x4d/0x440
[ 914.118996] kthread+0x16d/0x1b0
[ 914.119010] ret_from_fork+0x22/0x30
[ 914.119023]
-> #0 ((wq_completion)phy0){+.+.}-{0:0}:
[ 914.119045] __lock_acquire+0x146d/0x1cf0
[ 914.119057] lock_acquire+0x19b/0x360
[ 914.119067] flush_workqueue+0xae/0x470
[ 914.119084] ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.119260] ieee80211_do_stop+0x5d7/0x830 [mac80211]
[ 914.119409] ieee80211_stop+0x45/0x180 [mac80211]
[ 914.119557] __dev_close_many+0xb3/0x120
[ 914.119573] __dev_change_flags+0xc3/0x1d0
[ 914.119590] dev_change_flags+0x29/0x70
[ 914.119605] devinet_ioctl+0x653/0x810
[ 914.119620] inet_ioctl+0x193/0x1e0
[ 914.119631] sock_do_ioctl+0x4d/0xf0
[ 914.119649] sock_ioctl+0x262/0x340
[ 914.119665] __x64_sys_ioctl+0x96/0xd0
[ 914.119678] do_syscall_64+0x3d/0xd0
[ 914.119694] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 914.119709]
other info that might help us debug this:
[ 914.119717] Chain exists of:
(wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx
[ 914.119745] Possible unsafe locking scenario:
[ 914.119752] CPU0 CPU1
[ 914.119758] ---- ----
[ 914.119765] lock(&rdev->wiphy.mtx);
[ 914.119778] lock(rtnl_mutex);
[ 914.119792] lock(&rdev->wiphy.mtx);
[ 914.119807] lock((wq_completion)phy0);
[ 914.119819]
*** DEADLOCK ***
[ 914.119827] 2 locks held by ifconfig/2805:
[ 914.119837] #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20
[ 914.119872] #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[ 914.120039]
stack backtrace:
[ 914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G OE 5.16.0-rc1-wt-ath+ #1
[ 914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011
[ 914.120074] Call Trace:
[ 914.120084] <TASK>
[ 914.120094] dump_stack_lvl+0x73/0xa4
[ 914.120119] dump_stack+0x10/0x12
[ 914.120135] print_circular_bug.isra.44+0x221/0x2e0
[ 914.120165] check_noncircular+0x106/0x150
[ 914.120203] __lock_acquire+0x146d/0x1cf0
[ 914.120215] ? __lock_acquire+0x146d/0x1cf0
[ 914.120245] lock_acquire+0x19b/0x360
[ 914.120259] ? flush_workqueue+0x87/0x470
[ 914.120286] ? lockdep_init_map_type+0x6b/0x250
[ 914.120310] flush_workqueue+0xae/0x470
[ 914.120327] ? flush_workqueue+0x87/0x470
[ 914.120344] ? lockdep_hardirqs_on+0xd7/0x150
[ 914.120391] ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.120565] ? ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.120736] ieee80211_do_stop+0x5d7/0x830 [mac80211]
[ 914.120906] ieee80211_stop+0x45/0x180 [mac80211]
[ 914.121060] __dev_close_many+0xb3/0x120
[ 914.121081] __dev_change_flags+0xc3/0x1d0
[ 914.121109] dev_change_flags+0x29/0x70
[ 914.121131] devinet_ioctl+0x653/0x810
[ 914.121149] ? __might_fault+0x77/0x80
[ 914.121179] inet_ioctl+0x193/0x1e0
[ 914.121194] ? inet_ioctl+0x193/0x1e0
[ 914.121218] ? __might_fault+0x77/0x80
[ 914.121238] ? _copy_to_user+0x68/0x80
[ 914.121266] sock_do_ioctl+0x4d/0xf0
[ 914.121283] ? inet_stream_connect+0x60/0x60
[ 914.121297] ? sock_do_ioctl+0x4d/0xf0
[ 914.121329] sock_ioctl+0x262/0x340
[ 914.121347] ? sock_ioctl+0x262/0x340
[ 914.121362] ? exit_to_user_mode_prepare+0x13b/0x280
[ 914.121388] ? syscall_enter_from_user_mode+0x20/0x50
[ 914.121416] __x64_sys_ioctl+0x96/0xd0
[ 914.121430] ? br_ioctl_call+0x90/0x90
[ 914.121445] ? __x64_sys_ioctl+0x96/0xd0
[ 914.121465] do_syscall_64+0x3d/0xd0
[ 914.121482] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 914.121497] RIP: 0033:0x7f0ed051737b
[ 914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48
[ 914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b
[ 914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004
[ 914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001
[ 914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe
[ 914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000
[ 914.121620] </TASK>
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211201071745.17746-2-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a93789ae541c7d5c1c2a4942013adb6bcc5e2848 ]
Currently 'ar' reference is not added in skb_cb during
WMI mgmt tx. Though this is generally not used during tx completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar ptr from skb_cb from mgmt txmgmt_idr. Hence
fill them during tx call for proper usage.
Also free the skb which is missing currently in these
callbacks.
Crash_info:
[19282.489476] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[19282.489515] pgd = 91eb8000
[19282.496702] [00000000] *pgd=00000000
[19282.502524] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[19282.783728] PC is at ath11k_mac_vif_txmgmt_idr_remove+0x28/0xd8 [ath11k]
[19282.789170] LR is at idr_for_each+0xa0/0xc8
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1637832614-13831-1-git-send-email-quic_srirrama@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 273703ebdb01b6c5f1aaf4b98fb57b177609055c ]
Commit 31582373a4a8 ("ath11k: Change number of TCL rings to one for
QCA6390") avoids initializing the other entries of dp->tx_ring cause
the corresponding TX rings on QCA6390/WCN6855 are not used, but leaves
those ring masks in ath11k_hw_ring_mask_qca6390.tx unchanged. Normally
this is OK because we will only get interrupts from the first TX ring
on these chips and thus only the first entry of dp->tx_ring is involved.
In case of one MSI vector, all DP rings share the same IRQ. For each
interrupt, all rings have to be checked, which means the other entries
of dp->tx_ring are involved. However since they are not initialized,
system crashes.
Fix this issue by simply removing those ring masks.
crash stack:
[ 102.907438] BUG: kernel NULL pointer dereference, address: 0000000000000028
[ 102.907447] #PF: supervisor read access in kernel mode
[ 102.907451] #PF: error_code(0x0000) - not-present page
[ 102.907453] PGD 1081f0067 P4D 1081f0067 PUD 1081f1067 PMD 0
[ 102.907460] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 102.907465] CPU: 0 PID: 3511 Comm: apt-check Kdump: loaded Tainted: G E 5.15.0-rc4-wt-ath+ #20
[ 102.907470] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS RCD1005E 10/08/2020
[ 102.907472] RIP: 0010:ath11k_dp_tx_completion_handler+0x201/0x830 [ath11k]
[ 102.907497] Code: 3c 24 4e 8d ac 37 10 04 00 00 4a 8d bc 37 68 04 00 00 48 89 3c 24 48 63 c8 89 83 84 18 00 00 48 c1 e1 05 48 03 8b 78 18 00 00 <8b> 51 08 89 d6 83 e6 07 89 74 24 24 83 fe 03 74 04 85 f6 75 63 41
[ 102.907501] RSP: 0000:ffff9b7340003e08 EFLAGS: 00010202
[ 102.907505] RAX: 0000000000000001 RBX: ffff8e21530c0100 RCX: 0000000000000020
[ 102.907508] RDX: 0000000000000000 RSI: 00000000fffffe00 RDI: ffff8e21530c1938
[ 102.907511] RBP: ffff8e21530c0000 R08: 0000000000000001 R09: 0000000000000000
[ 102.907513] R10: ffff8e2145534c10 R11: 0000000000000001 R12: ffff8e21530c2938
[ 102.907515] R13: ffff8e21530c18e0 R14: 0000000000000100 R15: ffff8e21530c2978
[ 102.907518] FS: 00007f5d4297e740(0000) GS:ffff8e243d600000(0000) knlGS:0000000000000000
[ 102.907521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.907524] CR2: 0000000000000028 CR3: 00000001034ea000 CR4: 0000000000350ef0
[ 102.907527] Call Trace:
[ 102.907531] <IRQ>
[ 102.907537] ath11k_dp_service_srng+0x5c/0x2f0 [ath11k]
[ 102.907556] ath11k_pci_ext_grp_napi_poll+0x21/0x70 [ath11k_pci]
[ 102.907562] __napi_poll+0x2c/0x160
[ 102.907570] net_rx_action+0x251/0x310
[ 102.907576] __do_softirq+0x107/0x2fc
[ 102.907585] irq_exit_rcu+0x74/0x90
[ 102.907593] common_interrupt+0x83/0xa0
[ 102.907600] </IRQ>
[ 102.907601] asm_common_interrupt+0x1e/0x40
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211026011605.58615-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ae80b6033834342601e99f74f6a62ff5092b1cee ]
Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref
when ar->tx_cmd->odata is NULL. The patch adds a null check to
prevent such case.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
ar5523_cmd+0x46a/0x581 [ar5523]
ar5523_probe.cold+0x1b7/0x18da [ar5523]
? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523]
? __pm_runtime_set_status+0x54a/0x8f0
? _raw_spin_trylock_bh+0x120/0x120
? pm_runtime_barrier+0x220/0x220
? __pm_runtime_resume+0xb1/0xf0
usb_probe_interface+0x25b/0x710
really_probe+0x209/0x5d0
driver_probe_device+0xc6/0x1b0
device_driver_attach+0xe2/0x120
I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.
After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START,
I got the null-ptr-deref bug. I believe the bug is triggerable whenever
cmd->odata is NULL. After patching, I tested with the same input and no
longer see the KASAN report.
This was NOT tested on a real device.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXsmPQ3awHFLuAj2@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eccd25136386a04ebf46a64f3a34e8e0fab6d9e1 ]
In ath11k_mac_op_hw_scan(), the return value of kzalloc() is directly
used in memcpy(), which may lead to a NULL pointer dereference on
failure of kzalloc().
Fix this bug by adding a check of arg.extraie.ptr.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_ATH11K=m show no new warnings, and our static
analyzer no longer warns about this code.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211202155348.71315-1-zhou1615@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba53ee7f7f38cf0592b8be1dcdabaf8f7535f8c1 ]
frag_timer will be created & initialized for stations when
they associate and will be deleted during every key installation
while flushing old fragments.
For AP interface self peer will be created and Group keys
will be installed for this peer, but there will be no real
Station entry & hence frag_timer won't be created and
initialized, deleting such uninitialized kernel timers causes below
warnings and backtraces printed with CONFIG_DEBUG_OBJECTS_TIMERS
enabled.
[ 177.828008] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
[ 177.836833] WARNING: CPU: 3 PID: 188 at lib/debugobjects.c:508 debug_print_object+0xb0/0xf0
[ 177.845185] Modules linked in: ath11k_pci ath11k qmi_helpers qrtr_mhi qrtr ns mhi
[ 177.852679] CPU: 3 PID: 188 Comm: hostapd Not tainted 5.14.0-rc3-32919-g4034139e1838-dirty #14
[ 177.865805] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 177.871804] pc : debug_print_object+0xb0/0xf0
[ 177.876155] lr : debug_print_object+0xb0/0xf0
[ 177.880505] sp : ffffffc01169b5a0
[ 177.883810] x29: ffffffc01169b5a0 x28: ffffff80081c2320 x27: ffffff80081c4078
[ 177.890942] x26: ffffff8003fe8f28 x25: ffffff8003de9890 x24: ffffffc01134d738
[ 177.898075] x23: ffffffc010948f20 x22: ffffffc010b2d2e0 x21: ffffffc01169b628
[ 177.905206] x20: ffffffc01134d700 x19: ffffffc010c80d98 x18: 00000000000003f6
[ 177.912339] x17: 203a657079742074 x16: 63656a626f202930 x15: 0000000000000152
[ 177.919471] x14: 0000000000000152 x13: 00000000ffffffea x12: ffffffc010d732e0
[ 177.926603] x11: 0000000000000003 x10: ffffffc010d432a0 x9 : ffffffc010d432f8
[ 177.933735] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 0000000000000001
[ 177.940866] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
[ 177.947997] x2 : ffffffc010c93240 x1 : ffffff80023624c0 x0 : 0000000000000054
[ 177.955130] Call trace:
[ 177.957567] debug_print_object+0xb0/0xf0
[ 177.961570] debug_object_assert_init+0x124/0x178
[ 177.966269] try_to_del_timer_sync+0x1c/0x70
[ 177.970536] del_timer_sync+0x30/0x50
[ 177.974192] ath11k_peer_frags_flush+0x34/0x68 [ath11k]
[ 177.979439] ath11k_mac_op_set_key+0x1e4/0x338 [ath11k]
[ 177.984673] ieee80211_key_enable_hw_accel+0xc8/0x3d0
[ 177.989722] ieee80211_key_replace+0x360/0x740
[ 177.994160] ieee80211_key_link+0x16c/0x210
[ 177.998337] ieee80211_add_key+0x138/0x338
[ 178.002426] nl80211_new_key+0xfc/0x258
[ 178.006257] genl_family_rcv_msg_doit.isra.17+0xd8/0x120
[ 178.011565] genl_rcv_msg+0xd8/0x1c8
[ 178.015134] netlink_rcv_skb+0x38/0xf8
[ 178.018877] genl_rcv+0x34/0x48
[ 178.022012] netlink_unicast+0x174/0x230
[ 178.025928] netlink_sendmsg+0x188/0x388
[ 178.029845] ____sys_sendmsg+0x218/0x250
[ 178.033763] ___sys_sendmsg+0x68/0x90
[ 178.037418] __sys_sendmsg+0x44/0x88
[ 178.040988] __arm64_sys_sendmsg+0x20/0x28
[ 178.045077] invoke_syscall.constprop.5+0x54/0xe0
[ 178.049776] do_el0_svc+0x74/0xc0
[ 178.053084] el0_svc+0x10/0x18
[ 178.056133] el0t_64_sync_handler+0x88/0xb0
[ 178.060310] el0t_64_sync+0x148/0x14c
[ 178.063966] ---[ end trace 8a5cf0bf9d34a058 ]---
Add changes to not to delete frag timer for peers during
group key installation.
Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
Fixes: c3944a562102 ("ath11k: Clear the fragment cache during key install")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1639071421-25078-1-git-send-email-quic_ramess@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09cab4308bf9b8076ee4a3c56015daf9ef9cb23e ]
Kernel test robot reported:drivers/net/wireless/ath/wcn36xx/smd.c:943:33:
sparse: sparse: cast truncates bits from constant value (780 becomes 80)
The 'channels' field is not a simple u8 array but an array of
channel_params. Using sizeof for retrieving the max number of
channels is then wrong.
In practice, it was not an issue, because the sizeof returned
value is 780, which is truncated in min_t (u8) to 80, which is
the value we expect...
Fix that properly using ARRAY_SIZE instead of sizeof.
Fixes: d707f812bb05 ("wcn36xx: Channel list update before hardware scan")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1638435732-14657-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09b8cd69edcf2be04a781e1781e98e52a775c9ad ]
On an imx6dl-pico-pi board with a QCA9377 SDIO chip, simply trying to
connect via ssh to another machine causes:
[ 55.824159] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12
[ 55.832169] ath10k_sdio mmc1:0001:1: failed to submit frame: -12
[ 55.838529] ath10k_sdio mmc1:0001:1: failed to push frame: -12
[ 55.905863] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12
[ 55.913650] ath10k_sdio mmc1:0001:1: failed to submit frame: -12
[ 55.919887] ath10k_sdio mmc1:0001:1: failed to push frame: -12
, leading to an ssh connection failure.
One user inspected the size of frames on Wireshark and reported
the followig:
"I was able to narrow the issue down to the mtu. If I set the mtu for
the wlan0 device to 1486 instead of 1500, the issue does not happen.
The size of frames that I see on Wireshark is exactly 1500 after
setting it to 1486."
Clearing the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE avoids the problem and
the ssh command works successfully after that.
Introduce a 'credit_size_workaround' field to ath10k_hw_params for
the QCA9377 SDIO, so that the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE
is not set in this case.
Tested with QCA9377 SDIO with firmware WLAN.TF.1.1.1-00061-QCATFSWPZ-1.
Fixes: 2f918ea98606 ("ath10k: enable alt data of TX path for sdio")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211124131047.713756-1-festevam@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b689f091aafd1a874b2f88137934276ab0fca480 ]
CE interrupt configuration uses host ce parameters to assign/free
interrupts. Use host ce parameters to enable/disable interrupts.
This patch fixes below BUG,
BUG: KASAN: global-out-of-bounds in 0xffffffbffdfb035c at addr
ffffffbffde6eeac
Read of size 4 by task kworker/u8:2/132
Address belongs to variable ath11k_core_qmi_firmware_ready+0x1b0/0x5bc [ath11k]
OOB is due to ath11k_ahb_ce_irqs_enable() iterates ce_count(which is 12)
times and accessing 12th element in target_ce_config
(which has only 11 elements) from ath11k_ahb_ce_irq_enable().
With this change host ce configs are used to enable/disable interrupts.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00471-QCAHKSWPL_SILICONZ-1
Fixes: 967c1d1131fa ("ath11k: move target ce configs to hw_params")
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1637249558-12793-1-git-send-email-akolli@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 64bc3aa02ae78b1fcb1b850e0eb1f0622002bfaa ]
The ath11k driver is caching the information about RSN/WPA IE in the
configured beacon template. The cached information is used during
associations to figure out whether 4-way PKT/2-way GTK peer flags need to
be set or not.
But the code never cleared the state when no such IE was found. This can
for example happen when moving from an WPA/RSN to an open setup. The
(seemingly connected) peer was then not able to communicate over the
link because the firmware assumed a different (encryption enabled) state
for the peer.
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Fixes: 01e34233c645 ("ath11k: fix wmi peer flags in peer assoc command")
Cc: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
[sven@narfation.org: split into separate patches, clean up commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211115100441.33771-2-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 436a4e88659842a7cf634d7cc088c8f2cc94ebf5 ]
DISABLE_KEY sets the key_len to 0, firmware will not delete the keys if
key_len is 0. Changing from security mode to open mode will cause mcast
to be still encrypted without vdev restart.
Set the proper key_len for DISABLE_KEY cmd to clear the keys in
firmware.
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
[sven@narfation.org: split into separate patches, clean up commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211115100441.33771-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 086c921a354089f209318501038d43c98d3f409f ]
Some ETSI countries have a small overlap in the wireless-regdb with an ETSI
channel (5590-5650). A good example is Australia:
country AU: DFS-ETSI
(2400 - 2483.5 @ 40), (36)
(5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (20), NO-OUTDOOR, AUTO-BW, DFS
(5470 - 5600 @ 80), (27), DFS
(5650 - 5730 @ 80), (27), DFS
(5730 - 5850 @ 80), (36)
(57000 - 66000 @ 2160), (43), NO-OUTDOOR
If the firmware (or the BDF) is shipped with these rules then there is only
a 10 MHz overlap with the weather radar:
* below: 5470 - 5590
* weather radar: 5590 - 5600
* above: (none for the rule "5470 - 5600 @ 80")
There are several wrong assumption in the ath11k code:
* there is always a valid range below the weather radar
(actually: there could be no range below the weather radar range OR range
could be smaller than 20 MHz)
* intersected range in the weather radar range is valid
(actually: the range could be smaller than 20 MHz)
* range above weather radar is either empty or valid
(actually: the range could be smaller than 20 MHz)
These wrong assumption will lead in this example to a rule
(5590 - 5600 @ 20), (N/A, 27), (600000 ms), DFS, AUTO-BW
which is invalid according to is_valid_reg_rule() because the freq_diff is
only 10 MHz but the max_bandwidth is set to 20 MHz. Which results in a
rejection like:
WARNING: at backports-20210222_001-4.4.60-b157d2276/net/wireless/reg.c:3984
[...]
Call trace:
[<ffffffbffc3d2e50>] reg_get_max_bandwidth+0x300/0x3a8 [cfg80211]
[<ffffffbffc3d3d0c>] regulatory_set_wiphy_regd_sync+0x3c/0x98 [cfg80211]
[<ffffffbffc651598>] ath11k_regd_update+0x1a8/0x210 [ath11k]
[<ffffffbffc652108>] ath11k_regd_update_work+0x18/0x20 [ath11k]
[<ffffffc0000a93e0>] process_one_work+0x1f8/0x340
[<ffffffc0000a9784>] worker_thread+0x25c/0x448
[<ffffffc0000aedc8>] kthread+0xd0/0xd8
[<ffffffc000085550>] ret_from_fork+0x10/0x40
ath11k c000000.wifi: failed to perform regd update : -22
Invalid regulatory domain detected
To avoid this, the algorithm has to be changed slightly. Instead of
splitting a rule which overlaps with the weather radar range into 3 pieces
and accepting the first two parts blindly, it must actually be checked for
each piece whether it is a valid range. And only if it is valid, add it to
the output array.
When these checks are in place, the processed rules for AU would end up as
country AU: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 36), (N/A)
(5150 - 5250 @ 80), (6, 23), (N/A), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (6, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
(5470 - 5590 @ 80), (6, 27), (0 ms), DFS, AUTO-BW
(5650 - 5730 @ 80), (6, 27), (0 ms), DFS, AUTO-BW
(5730 - 5850 @ 80), (6, 36), (N/A), AUTO-BW
and will be accepted by the wireless regulatory code.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112153116.1214421-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 16a2c3d5406f95ef6139de52669c60a39443f5f7 ]
HTT_PPDU_STATS_CFG_PDEV_ID bit mask for target FW PPDU stats request message
was set as bit 8 to 15. Bit 8 is reserved for soc stats and pdev id starts from
bit 9. Hence change the bitmask as bit 9 to 15 and fill the proper pdev id in
the request message.
In commit 701e48a43e15 ("ath11k: add packet log support for QCA6390"), both
HTT_PPDU_STATS_CFG_PDEV_ID and pdev_mask were changed, but this pdev_mask
calculation is not valid for platforms which has multiple pdevs with 1 rxdma
per pdev, as this is writing same value(i.e. 2) for all pdevs. Hence fixed it
to consider pdev_idx as well, to make it compatible for both single and multi
pd cases.
Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
Tested on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1
Fixes: 701e48a43e15 ("ath11k: add packet log support for QCA6390")
Co-developed-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Rameshkumar Sundaram <ramess@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-10-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfdf6b19e750f7de8ae71a26932f63b52e3bf74c ]
The linear mapping between the BD rate field and the driver's 5GHz
legacy rates table (wcn_5ghz_rates) does not only apply for the latter
four rates -- it applies to all eight rates.
Fixes: 6ea131acea98 ("wcn36xx: Fix warning due to bad rate_idx")
Signed-off-by: Benjamin Li <benl@squareup.com>
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211104010548.1107405-3-benl@squareup.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c9c5608fafe4dae975c9644c7d14c51ad3b0ed73 ]
status.band is used in determination of status.rate -- for 5GHz on legacy
rates there is a linear shift between the BD descriptor's rate field and
the wcn36xx driver's rate table (wcn_5ghz_rates).
We have a special clause to populate status.band for hardware scan offload
frames. However, this block occurs after status.rate is already populated.
Correctly handle this dependency by moving the band block before the rate
block.
This patch addresses kernel warnings & missing scan results for 5GHz APs
that send their beacons/probe responses at the higher four legacy rates
(24-54 Mbps), when using hardware scan offload:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4532 ieee80211_rx_napi+0x744/0x8d8
Modules linked in: wcn36xx [...]
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.107-g73909fa #1
Hardware name: Square, Inc. T2 (all variants) (DT)
Call trace:
dump_backtrace+0x0/0x148
show_stack+0x14/0x1c
dump_stack+0xb8/0xf0
__warn+0x2ac/0x2d8
warn_slowpath_null+0x44/0x54
ieee80211_rx_napi+0x744/0x8d8
ieee80211_tasklet_handler+0xa4/0xe0
tasklet_action_common+0xe0/0x118
tasklet_action+0x20/0x28
__do_softirq+0x108/0x1ec
irq_exit+0xd4/0xd8
__handle_domain_irq+0x84/0xbc
gic_handle_irq+0x4c/0xb8
el1_irq+0xe8/0x190
lpm_cpuidle_enter+0x220/0x260
cpuidle_enter_state+0x114/0x1c0
cpuidle_enter+0x34/0x48
do_idle+0x150/0x268
cpu_startup_entry+0x20/0x24
rest_init+0xd4/0xe0
start_kernel+0x398/0x430
---[ end trace ae28cb759352b403 ]---
Fixes: 8a27ca394782 ("wcn36xx: Correct band/freq reporting on RX")
Signed-off-by: Benjamin Li <benl@squareup.com>
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211104010548.1107405-2-benl@squareup.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed04ea76e69e7194f7489cebe23a32a68f39218d ]
When deiniting the DXE hardware we should reset the block to ensure there
is no spurious DMA write transaction from the downstream WCNSS to upstream
MSM at a skbuff address we will have released.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-4-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3652096e5263ad67604b0323f71d133485f410e5 ]
When unloading the driver we are not releasing the DMA descriptors which we
previously allocated.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-3-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89dcb1da611d9b3ff0728502d58372fdaae9ebff ]
Right now we have a broken sequence where we enable DMA channel interrupts
which can be left enabled and never disabled if we hit an error path.
Worse still when we unload the driver, the DMA channel interrupt bits are
left intact. About the only saving grace here is that we do remember to
disable the wcnss interrupt when unload the driver.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-2-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 588b45c88ae130fe373a8c50edaf54735c3f4fe3 ]
Firmware can trigger a missed beacon indication, this is not the same as a
lost signal.
Flag to Linux the missed beacon and let the WiFi stack decide for itself if
the link is up or down by sending its own probe to determine this.
We should only be signalling the link is lost when the firmware indicates
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211027232529.657764-1-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f1ba8b0ee2679f0b3d22d2a5c1bc70c436fd872 ]
An SMD capture from the downstream prima driver on WCN3680B shows the
following command sequence for connected scans:
- init_scan_req
- start_scan_req, channel 1
- end_scan_req, channel 1
- start_scan_req, channel 2
- ...
- end_scan_req, channel 3
- finish_scan_req
- init_scan_req
- start_scan_req, channel 4
- ...
- end_scan_req, channel 6
- finish_scan_req
- ...
- end_scan_req, channel 165
- finish_scan_req
Upstream currently never calls wcn36xx_smd_end_scan, and in some cases[1]
still sends finish_scan_req twice in a row or before init_scan_req. A
typical connected scan looks like this:
- init_scan_req
- start_scan_req, channel 1
- finish_scan_req
- init_scan_req
- start_scan_req, channel 2
- ...
- start_scan_req, channel 165
- finish_scan_req
- finish_scan_req
This patch cleans up scanning so that init/finish and start/end are always
paired together and correctly nested.
- init_scan_req
- start_scan_req, channel 1
- end_scan_req, channel 1
- finish_scan_req
- init_scan_req
- start_scan_req, channel 2
- end_scan_req, channel 2
- ...
- start_scan_req, channel 165
- end_scan_req, channel 165
- finish_scan_req
Note that upstream will not do batching of 3 active-probe scans before
returning to the operating channel, and this patch does not change that.
To match downstream in this aspect, adjust IEEE80211_PROBE_DELAY and/or
the 125ms max off-channel time in ieee80211_scan_state_decision.
[1]: commit d195d7aac09b ("wcn36xx: Ensure finish scan is not requested
before start scan") addressed one case of finish_scan_req being sent
without a preceding init_scan_req (the case of the operating channel
coinciding with the first scan channel); two other cases are:
1) if SW scan is started and aborted immediately, without scanning any
channels, we send a finish_scan_req without ever sending init_scan_req,
and
2) as SW scan logic always returns us to the operating channel before
calling wcn36xx_sw_scan_complete, finish_scan_req is always sent twice
at the end of a SW scan
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Benjamin Li <benl@squareup.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211027170306.555535-4-benl@squareup.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fc95d10ac41d75c14a81afcc8722333d8b2cf80f upstream.
Currently ath11k only support string type with bus, chip id and board id
such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for ahb bus chip and
"bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCIe bus chip in
board-2.bin. For WCN6855, it is not enough to distinguish all different
chips.
This is to add a new string type which include bus, chip id, board id,
vendor, device, subsystem-vendor and subsystem-device for WCN6855.
ath11k will first load board-2.bin and search in it for the board data
with the above parameters, if matched one board data, then download it
to firmware, if not matched any one, then ath11k will download the file
board.bin to firmware.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211111065340.20187-1-quic_wgong@quicinc.com
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a658c929ded7ea3aee324c8c2a9635a5e5a38e7f upstream.
If cfg80211 is providing extraie's for a scanning process then ath11k will
copy that over to the firmware. The extraie.len is a 32 bit value in struct
element_info and describes the amount of bytes for the vendor information
elements.
The WMI_TLV packet is having a special WMI_TAG_ARRAY_BYTE section. This
section can have a (payload) length up to 65535 bytes because the
WMI_TLV_LEN can store up to 16 bits. The code was missing such a check and
could have created a scan request which cannot be parsed correctly by the
firmware.
But the bigger problem was the allocation of the buffer. It has to align
the TLV sections by 4 bytes. But the code was using an u8 to store the
newly calculated length of this section (with alignment). And the new
calculated length was then used to allocate the skbuff. But the actual code
to copy in the data is using the extraie.len and not the calculated
"aligned" length.
The length of extraie with IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS enabled
was 264 bytes during tests with a QCA Milan card. But it only allocated 8
bytes (264 bytes % 256) for it. As consequence, the code to memcpy the
extraie into the skb was then just overwriting data after skb->end. Things
like shinfo were therefore corrupted. This could usually be seen by a crash
in skb_zcopy_clear which tried to call a ubuf_info callback (using a bogus
address).
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Cc: stable@vger.kernel.org
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211207142913.1734635-1-sven@narfation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cab2d3fd6866e089b5c50db09dece131f85bfebd upstream.
For whatever reason, some devices like QCA6390, WCN6855 using ath11k
are not in M3 state during PM resume, but still functional. The
mhi_pm_resume should then not fail in those cases, and let the higher
level device specific stack continue resuming process.
Add an API mhi_pm_resume_force(), to force resuming irrespective of the
current MHI state. This fixes a regression with non functional ath11k WiFi
after suspend/resume cycle on some machines.
Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179
Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/
Fixes: 020d3b26c07a ("bus: mhi: Early MHI resume failure in non M3 state")
Cc: stable@vger.kernel.org #5.13
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[mani: Switched to API, added bug report, reported-by tags and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 937e79c67740d1d84736730d679f3cb2552f990e upstream.
Using a kernel pointer in place of a dma_addr_t token can
lead to undefined behavior if that makes it into cache
management functions. The compiler caught one such attempt
in a cast:
drivers/net/wireless/ath/ath10k/mac.c: In function 'ath10k_add_interface':
drivers/net/wireless/ath/ath10k/mac.c:5586:47: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
5586 | arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf;
| ^
Looking through how this gets used down the way, I'm fairly
sure that beacon_paddr is never accessed again for ATH10K_DEV_TYPE_HL
devices, and if it was accessed, that would be a bug.
Change the assignment to use a known-invalid address token
instead, which avoids the warning and makes it easier to catch
bugs if it does end up getting used.
Fixes: e263bdab9c0e ("ath10k: high latency fixes for beacon buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211014075153.3655910-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d707f812bb0513ea0030d0c9fe2a456bae5a4583 ]
The channel scan list must be updated before triggering a hardware scan
so that firmware takes into account the regulatory info for each single
channel such as active/passive config, power, DFS, etc... Without this
the firmware uses its own internal default channel configuration, which
is not aligned with mac80211 regulatory rules, and misses several
channels (e.g. 144).
Fixes: 2f3bef4b247e ("wcn36xx: Add hardware scan offload support")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635175328-25642-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 113f304dbc1627c6ec9d5329d839964095768980 ]
The firmware is offering features such as ARP offload, for which
firmware crafts its own (QoS)packets without waking up the host.
Point is that the sequence numbers generated by the firmware are
not in sync with the host mac80211 layer and can cause packets
such as firmware ARP reponses to be dropped by the AP (too old SN).
To fix this we need to let the firmware manages the sequence
numbers by its own (except for QoS null frames). There is a SN
counter for each QoS queue and one global/baseline counter for
Non-QoS.
Fixes: 84aff52e4f57 ("wcn36xx: Use sequence number allocated by mac80211")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635150336-18736-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9bfe38e064af5decba2ffce66a2958ab8b10eaa4 ]
This is essentially exactly following the dma_wmb()/dma_rmb() usage
instructions in Documentation/memory-barriers.txt.
The theoretical races here are:
1. DXE (the DMA Transfer Engine in the Wi-Fi subsystem) seeing the
dxe->ctrl & WCN36xx_DXE_CTRL_VLD write before the dxe->dst_addr_l
write, thus performing DMA into the wrong address.
2. CPU reading dxe->dst_addr_l before DXE unsets dxe->ctrl &
WCN36xx_DXE_CTRL_VLD. This should generally be harmless since DXE
doesn't write dxe->dst_addr_l (no risk of freeing the wrong skb).
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211023001528.3077822-1-benl@squareup.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f8c8bf4c7c9be1c42088689fd4370e06b46608a ]
Commit 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support")
introduced a new firmware feature flag ATH10K_FW_FEATURE_IRAM_RECOVERY. But
this caused ath10k_pci module load to fail if ATH10K_FW_CRASH_DUMP_RAM_DATA bit
was not enabled in the ath10k coredump_mask module parameter:
[ 2209.328190] ath10k_pci 0000:02:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 2209.434414] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1
[ 2209.547191] ath10k_pci 0000:02:00.0: firmware ver 10.4-3.9.0.2-00099 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery crc32 cbade90a
[ 2210.896485] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id 0:1 crc32 a040efc2
[ 2213.603339] ath10k_pci 0000:02:00.0: failed to copy target iram contents: -12
[ 2213.839027] ath10k_pci 0000:02:00.0: could not init core (-12)
[ 2213.933910] ath10k_pci 0000:02:00.0: could not probe fw (-12)
And by default coredump_mask does not have ATH10K_FW_CRASH_DUMP_RAM_DATA
enabled so anyone using a firmware with iram-recovery feature would fail. To my
knowledge only QCA9984 firmwares starting from release 10.4-3.9.0.2-00099
enabled the feature.
The reason for regression was that ath10k_core_copy_target_iram() used
ath10k_coredump_get_mem_layout() to get the memory layout, but when
ATH10K_FW_CRASH_DUMP_RAM_DATA was disabled it would get just NULL and bail out
with an error.
While looking at all this I noticed another bug: if CONFIG_DEV_COREDUMP is
disabled but the firmware has iram-recovery enabled the module load fails with
similar error messages. I fixed that by returning 0 from
ath10k_core_copy_target_iram() when _ath10k_coredump_get_mem_layout() returns
NULL.
Tested-on: QCA9984 hw2.0 PCI 10.4-3.9.0.2-00139
Fixes: 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support")
Signed-off-by: Abinaya Kalaiselvan <akalaise@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211020075054.23061-1-kvalo@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a491167fe0cf9f26062462de2a8688b96125d48 ]
Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB
steps). This isn't the case for max_antenna_gain - which is still expected
by the firmware as dB.
The firmware is converting it from dB to the internal (twicepower)
representation when it calculates the limits of a channel. This can be seen
in tpc_stats when configuring "12" as max_antenna_gain. Instead of the
expected 12 (6 dB), the tpc_stats shows 24 (12 dB).
Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057.
Fixes: 02256930d9b8 ("ath10k: use proper tx power unit")
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20190611172131.6064-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4925642d541278575ad1948c5924d71ffd57ef14 ]
In tests with two Lima boards from 8devices (QCA4531 based) on OpenWrt
19.07 we could force a silent restart of a device with no serial
output when we were sending a high amount of UDP traffic (iperf3 at 80
MBit/s in both directions from external hosts, saturating the wifi and
causing a load of about 4.5 to 6) and were then triggering an
ath9k_queue_reset().
Further debugging showed that the restart was caused by the ath79
watchdog. With disabled watchdog we could observe that the device was
constantly going into ath_isr() interrupt handler and was returning
early after the ATH_OP_HW_RESET flag test, without clearing any
interrupts. Even though ath9k_queue_reset() calls
ath9k_hw_kill_interrupts().
With JTAG we could observe the following race condition:
1) ath9k_queue_reset()
...
-> ath9k_hw_kill_interrupts()
-> set_bit(ATH_OP_HW_RESET, &common->op_flags);
...
<- returns
2) ath9k_tasklet()
...
-> ath9k_hw_resume_interrupts()
...
<- returns
3) loops around:
...
handle_int()
-> ath_isr()
...
-> if (test_bit(ATH_OP_HW_RESET,
&common->op_flags))
return IRQ_HANDLED;
x) ath_reset_internal():
=> never reached <=
And in ath_isr() we would typically see the following interrupts /
interrupt causes:
* status: 0x00111030 or 0x00110030
* async_cause: 2 (AR_INTR_MAC_IPQ)
* sync_cause: 0
So the ath9k_tasklet() reenables the ath9k interrupts
through ath9k_hw_resume_interrupts() which ath9k_queue_reset() had just
disabled. And ath_isr() then keeps firing because it returns IRQ_HANDLED
without actually clearing the interrupt.
To fix this IRQ storm also clear/disable the interrupts again when we
are in reset state.
Cc: Sven Eckelmann <sven@narfation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Fixes: 872b5d814f99 ("ath9k: do not access hardware on IRQs during reset")
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210914192515.9273-3-linus.luessing@c0d3.blue
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
