1 files changed, 0 insertions, 91 deletions
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
deleted file mode 100644
index f0f5553a9e74..000000000000
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Freescale i.MX General Power Controller
-=======================================
-
-The i.MX6 General Power Control (GPC) block contains DVFS load tracking
-counters and Power Gating Control (PGC).
-
-Required properties:
-- compatible: Should be one of the following:
-  - fsl,imx6q-gpc
-  - fsl,imx6qp-gpc
-  - fsl,imx6sl-gpc
-  - fsl,imx6sx-gpc
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain one interrupt specifier for the GPC interrupt
-- clocks: Must contain an entry for each entry in clock-names.
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - ipg
-
-The power domains are generic power domain providers as documented in
-Documentation/devicetree/bindings/power/power-domain.yaml. They are described as
-subnodes of the power gating controller 'pgc' node of the GPC and should
-contain the following:
-
-Required properties:
-- reg: Must contain the DOMAIN_INDEX of this power domain
-  The following DOMAIN_INDEX values are valid for i.MX6Q:
-  ARM_DOMAIN     0
-  PU_DOMAIN      1
-  The following additional DOMAIN_INDEX value is valid for i.MX6SL:
-  DISPLAY_DOMAIN 2
-  The following additional DOMAIN_INDEX value is valid for i.MX6SX:
-  PCI_DOMAIN     3
-
-- #power-domain-cells: Should be 0
-
-Optional properties:
-- clocks: a number of phandles to clocks that need to be enabled during domain
-  power-up sequencing to ensure reset propagation into devices located inside
-  this power domain
-- power-supply: a phandle to the regulator powering this domain
-
-Example:
-
-	gpc: gpc@20dc000 {
-		compatible = "fsl,imx6q-gpc";
-		reg = <0x020dc000 0x4000>;
-		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6QDL_CLK_IPG>;
-		clock-names = "ipg";
-
-		pgc {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			power-domain@0 {
-				reg = <0>;
-				#power-domain-cells = <0>;
-			};
-
-			pd_pu: power-domain@1 {
-				reg = <1>;
-				#power-domain-cells = <0>;
-				power-supply = <&reg_pu>;
-				clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
-				         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
-				         <&clks IMX6QDL_CLK_GPU2D_CORE>,
-				         <&clks IMX6QDL_CLK_GPU2D_AXI>,
-				         <&clks IMX6QDL_CLK_OPENVG_AXI>,
-				         <&clks IMX6QDL_CLK_VPU_AXI>;
-			};
-		};
-	};
-
-
-Specifying power domain for IP modules
-======================================
-
-IP cores belonging to a power domain should contain a 'power-domains' property
-that is a phandle pointing to the power domain the device belongs to.
-
-Example of a device that is part of the PU power domain:
-
-	vpu: vpu@2040000 {
-		reg = <0x02040000 0x3c000>;
-		/* ... */
-		power-domains = <&pd_pu>;
-		/* ... */
-	};