avr32: remove support for AVR32 architecture

This patch drops support for AVR32 architecture from the Linux kernel.

The AVR32 architecture is not keeping up with the development of the
kernel, and since it shares so much of the drivers with Atmel ARM SoC,
it is starting to hinder these drivers to develop swiftly.

Also, all AVR32 AP7 SoC processors are end of lifed from Atmel (now
Microchip).

Finally, the GCC toolchain is stuck at version 4.2.x, and has not
received any patches since the last release from Atmel;
4.2.4-atmel.1.1.3.avr32linux.1. When building kernel v4.10, this
toolchain is no longer able to properly link the network stack.

Haavard and I have came to the conclusion that we feel keeping AVR32 on
life support offers more obstacles for Atmel ARMs, than it gives joy to
AVR32 users. I also suspect there are very few AVR32 users left today,
if anybody at all.

Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

34 files changed, 0 insertions, 4284 deletions

diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
deleted file mode 100644
index 4e55617ade2d..000000000000
--- a/arch/avr32/boards/atngw100/Kconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-# NGW100 customization
-
-if BOARD_ATNGW100_COMMON
-
-config BOARD_ATNGW100_MKII_LCD
-	bool "Enable ATNGW100 mkII LCD interface"
-	depends on BOARD_ATNGW100_MKII
-	help
-	  This enables the LCD controller (LCDC) in the AT32AP7000. Since the
-	  LCDC is multiplexed with MACB1 (LAN) Ethernet port, only one can be
-	  enabled at a time.
-
-	  This choice enables the LCDC and disables the MACB1 interface marked
-	  LAN on the PCB.
-
-choice
-	prompt "Select an NGW100 add-on board to support"
-	default BOARD_ATNGW100_ADDON_NONE
-
-config BOARD_ATNGW100_ADDON_NONE
-	bool "None"
-
-config BOARD_ATNGW100_EVKLCD10X
-	bool "EVKLCD10X addon board"
-	depends on BOARD_ATNGW100_MKI || BOARD_ATNGW100_MKII_LCD
-	help
-	  This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
-	  addon board for the NGW100 and NGW100 mkII. By enabling this the LCD
-	  controller and AC97 controller is added as platform devices.
-
-config BOARD_ATNGW100_MRMT
-	bool "Mediama RMT1/2 add-on board"
-	help
-	  This enables support for the Mediama RMT1 or RMT2 board.
-	  RMT provides LCD support, AC97 codec and other
-	  optional peripherals to the Atmel NGW100.
-
-	  This choice disables the detect pin and the write-protect pin for the
-	  MCI platform device, since it conflicts with the LCD platform device.
-	  The MCI pins can be reenabled by editing the "add device function" but
-	  this may break the setup for other displays that use these pins.
-
-endchoice
-
-choice
-	prompt "LCD panel resolution on EVKLCD10X"
-	depends on BOARD_ATNGW100_EVKLCD10X
-	default BOARD_ATNGW100_EVKLCD10X_VGA
-
-config BOARD_ATNGW100_EVKLCD10X_QVGA
-	bool "QVGA (320x240)"
-
-config BOARD_ATNGW100_EVKLCD10X_VGA
-	bool "VGA (640x480)"
-
-config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
-	bool "Powertip QVGA (320x240)"
-
-endchoice
-
-if BOARD_ATNGW100_MRMT
-source	"arch/avr32/boards/atngw100/Kconfig_mrmt"
-endif
-
-endif	# BOARD_ATNGW100_COMMON
diff --git a/arch/avr32/boards/atngw100/Kconfig_mrmt b/arch/avr32/boards/atngw100/Kconfig_mrmt
deleted file mode 100644
index 9a199a207f3c..000000000000
--- a/arch/avr32/boards/atngw100/Kconfig_mrmt
+++ /dev/null
@@ -1,80 +0,0 @@
-# RMT for NGW100 customization
-
-choice
-	prompt "RMT Version"
-	help
-	  Select the RMTx board version.
-
-config BOARD_MRMT_REV1
-	bool "RMT1"
-config BOARD_MRMT_REV2
-	bool "RMT2"
-
-endchoice
-
-config BOARD_MRMT_AC97
-	bool "Enable AC97 CODEC"
-	help
-	  Enable the UCB1400 AC97 CODEC driver.
-
-choice
-	prompt "Touchscreen Driver"
-	default BOARD_MRMT_ADS7846_TS
-
-config BOARD_MRMT_UCB1400_TS
-	bool "Use UCB1400 Touchscreen"
-
-config BOARD_MRMT_ADS7846_TS
-	bool "Use ADS7846 Touchscreen"
-
-endchoice
-
-choice
-	prompt "RMTx LCD Selection"
-	default BOARD_MRMT_LCD_DISABLE
-
-config BOARD_MRMT_LCD_DISABLE
-	bool "LCD Disabled"
-
-config BOARD_MRMT_LCD_LQ043T3DX0X
-	bool "Sharp LQ043T3DX0x or compatible"
-	help
-	  If using RMT2, be sure to load the resistor pack selectors accordingly
-
-if BOARD_MRMT_REV2
-config BOARD_MRMT_LCD_KWH043GM08
-	bool "Formike KWH043GM08 or compatible"
-	help
-	  Be sure to load the RMT2 resistor pack selectors accordingly
-endif
-
-endchoice
-
-if !BOARD_MRMT_LCD_DISABLE
-config BOARD_MRMT_BL_PWM
-	bool "Use PWM control for LCD Backlight"
-	help
-		Use PWM driver for controlling LCD Backlight.
-		Otherwise, LCD Backlight is always on.
-endif
-
-config BOARD_MRMT_RTC_I2C
-	bool "Use External RTC on I2C Bus"
-	help
-		RMT1 has an optional RTC device on the I2C bus.
-		It is a SII S35390A.  Be sure to select the
-		matching RTC driver.
-
-choice
-	prompt "Wireless Module on ttyS2"
-	default BOARD_MRMT_WIRELESS_ZB
-
-config BOARD_MRMT_WIRELESS_ZB
-	bool "Use ZigBee/802.15.4 Module"
-
-config BOARD_MRMT_WIRELESS_BT
-	bool "Use Bluetooth (HCI) Module"
-
-config BOARD_MRMT_WIRELESS_NONE
-	bool "Not Installed"
-endchoice
diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
deleted file mode 100644
index f4ebe42a8254..000000000000
--- a/arch/avr32/boards/atngw100/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-y					+= setup.o flash.o
-obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X)	+= evklcd10x.o
-obj-$(CONFIG_BOARD_ATNGW100_MRMT)	+= mrmt.o
diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
deleted file mode 100644
index 64919b0da7aa..000000000000
--- a/arch/avr32/boards/atngw100/evklcd10x.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100
- * Network Gateway
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/gpio.h>
-#include <linux/fb.h>
-#include <linux/platform_device.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/portmux.h>
-#include <mach/board.h>
-
-#include <sound/atmel-ac97c.h>
-
-static struct ac97c_platform_data __initdata ac97c0_data = {
-	.reset_pin = GPIO_PIN_PB(19),
-};
-
-#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA
-static struct fb_videomode __initdata tcg057vglad_modes[] = {
-	{
-		.name		= "640x480 @ 50",
-		.refresh	= 50,
-		.xres		= 640,		.yres		= 480,
-		.pixclock	= KHZ2PICOS(25180),
-
-		.left_margin	= 64,		.right_margin	= 96,
-		.upper_margin	= 34,		.lower_margin	= 11,
-		.hsync_len	= 64,		.vsync_len	= 15,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
-	.manufacturer		= "KYO",
-	.monitor		= "TCG057VGLAD",
-	.modedb			= tcg057vglad_modes,
-	.modedb_len		= ARRAY_SIZE(tcg057vglad_modes),
-	.hfmin			= 19948,
-	.hfmax			= 31478,
-	.vfmin			= 50,
-	.vfmax			= 67,
-	.dclkmax		= 28330000,
-};
-
-static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
-	.default_bpp		= 16,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.default_monspecs	= &atevklcd10x_default_monspecs,
-	.guard_time		= 2,
-};
-#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA
-static struct fb_videomode __initdata tcg057qvlad_modes[] = {
-	{
-		.name		= "320x240 @ 50",
-		.refresh	= 50,
-		.xres		= 320,		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6300),
-
-		.left_margin	= 34,		.right_margin	= 46,
-		.upper_margin	= 7,		.lower_margin	= 15,
-		.hsync_len	= 64,		.vsync_len	= 12,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
-	.manufacturer		= "KYO",
-	.monitor		= "TCG057QVLAD",
-	.modedb			= tcg057qvlad_modes,
-	.modedb_len		= ARRAY_SIZE(tcg057qvlad_modes),
-	.hfmin			= 19948,
-	.hfmax			= 31478,
-	.vfmin			= 50,
-	.vfmax			= 67,
-	.dclkmax		= 7000000,
-};
-
-static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
-	.default_bpp		= 16,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.default_monspecs	= &atevklcd10x_default_monspecs,
-	.guard_time		= 2,
-};
-#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA
-static struct fb_videomode __initdata ph320240t_modes[] = {
-	{
-		.name		= "320x240 @ 60",
-		.refresh	= 60,
-		.xres		= 320,		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6300),
-
-		.left_margin	= 38,		.right_margin	= 20,
-		.upper_margin	= 15,		.lower_margin	= 5,
-		.hsync_len	= 30,		.vsync_len	= 3,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
-	.manufacturer		= "POW",
-	.monitor		= "PH320240T",
-	.modedb			= ph320240t_modes,
-	.modedb_len		= ARRAY_SIZE(ph320240t_modes),
-	.hfmin			= 14400,
-	.hfmax			= 21600,
-	.vfmin			= 50,
-	.vfmax			= 90,
-	.dclkmax		= 6400000,
-};
-
-static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
-	.default_bpp		= 16,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.default_monspecs	= &atevklcd10x_default_monspecs,
-	.guard_time		= 2,
-};
-#endif
-
-static void atevklcd10x_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
-{
-	gpio_set_value(GPIO_PIN_PB(15), on);
-}
-
-static int __init atevklcd10x_init(void)
-{
-	/* PB15 is connected to the enable line on the boost regulator
-	 * controlling the backlight for the LCD panel.
-	 */
-	at32_select_gpio(GPIO_PIN_PB(15), AT32_GPIOF_OUTPUT);
-	gpio_request(GPIO_PIN_PB(15), "backlight");
-	gpio_direction_output(GPIO_PIN_PB(15), 0);
-
-	atevklcd10x_lcdc_data.atmel_lcdfb_power_control =
-		atevklcd10x_lcdc_power_control;
-
-	at32_add_device_lcdc(0, &atevklcd10x_lcdc_data,
-			fbmem_start, fbmem_size,
-#ifdef CONFIG_BOARD_ATNGW100_MKII
-			ATMEL_LCDC_PRI_18BIT | ATMEL_LCDC_PC_DVAL
-#else
-			ATMEL_LCDC_ALT_18BIT | ATMEL_LCDC_PE_DVAL
-#endif
-			);
-
-	at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);
-
-	return 0;
-}
-postcore_initcall(atevklcd10x_init);
diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
deleted file mode 100644
index 55ccc9ce4892..000000000000
--- a/arch/avr32/boards/atngw100/flash.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * ATNGW100 board-specific flash initialization
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/smc.h>
-
-static struct smc_timing flash_timing __initdata = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 40,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 10,
-
-	.ncs_read_pulse		= 80,
-	.nrd_pulse		= 40,
-	.ncs_write_pulse	= 65,
-	.nwe_pulse		= 55,
-
-	.read_cycle		= 120,
-	.write_cycle		= 120,
-};
-
-static struct smc_config flash_config __initdata = {
-	.bus_width		= 2,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.byte_write		= 1,
-};
-
-static struct mtd_partition flash_parts[] = {
-	{
-		.name           = "u-boot",
-		.offset         = 0x00000000,
-		.size           = 0x00020000,           /* 128 KiB */
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "root",
-		.offset         = 0x00020000,
-		.size           = 0x007d0000,
-	},
-	{
-		.name           = "env",
-		.offset         = 0x007f0000,
-		.size           = 0x00010000,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data flash_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(flash_parts),
-	.parts		= flash_parts,
-};
-
-static struct resource flash_resource = {
-	.start		= 0x00000000,
-	.end		= 0x007fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &flash_resource,
-	.num_resources	= 1,
-	.dev		= {
-		.platform_data = &flash_data,
-	},
-};
-
-/* This needs to be called after the SMC has been initialized */
-static int __init atngw100_flash_init(void)
-{
-	int ret;
-
-	smc_set_timing(&flash_config, &flash_timing);
-	ret = smc_set_configuration(0, &flash_config);
-	if (ret < 0) {
-		printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
-		return ret;
-	}
-
-	platform_device_register(&flash_device);
-
-	return 0;
-}
-device_initcall(atngw100_flash_init);
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
deleted file mode 100644
index 99b0a7984950..000000000000
--- a/arch/avr32/boards/atngw100/mrmt.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * Board-specific setup code for Remote Media Terminal 1 (RMT1)
- * add-on board for the ATNGW100 Network Gateway
- *
- * Copyright (C) 2008 Mediama Technologies
- * Based on ATNGW100 Network Gateway (Copyright (C) Atmel)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/linkage.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/leds.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <video/atmel_lcdc.h>
-#include <sound/atmel-ac97c.h>
-
-#include <asm/delay.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-/* Define board-specifoic GPIO assignments */
-#define PIN_LCD_BL	GPIO_PIN_PA(28)
-#define PWM_CH_BL	0	/* Must match with GPIO pin definition */
-#define PIN_LCD_DISP	GPIO_PIN_PA(31)
-#define	PIN_AC97_RST_N	GPIO_PIN_PA(30)
-#define PB_EXTINT_BASE	25
-#define TS_IRQ		0
-#define PIN_TS_EXTINT	GPIO_PIN_PB(PB_EXTINT_BASE+TS_IRQ)
-#define PIN_PB_LEFT	GPIO_PIN_PB(11)
-#define PIN_PB_RIGHT	GPIO_PIN_PB(12)
-#define PIN_PWR_SW_N	GPIO_PIN_PB(14)
-#define PIN_PWR_ON	GPIO_PIN_PB(13)
-#define PIN_ZB_RST_N	GPIO_PIN_PA(21)
-#define PIN_BT_RST	GPIO_PIN_PA(22)
-#define PIN_LED_SYS	GPIO_PIN_PA(16)
-#define PIN_LED_A	GPIO_PIN_PA(19)
-#define PIN_LED_B	GPIO_PIN_PE(19)
-
-#ifdef CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X
-/* Sharp LQ043T3DX0x (or compatible) panel */
-static struct fb_videomode __initdata lcd_fb_modes[] = {
-	{
-		.name		= "480x272 @ 59.94Hz",
-		.refresh	= 59.94,
-		.xres		= 480,		.yres		= 272,
-		.pixclock	= KHZ2PICOS(9000),
-
-		.left_margin	= 2,		.right_margin	= 2,
-		.upper_margin	= 3,		.lower_margin	= 9,
-		.hsync_len	= 41,		.vsync_len	= 1,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
-	.manufacturer		= "SHA",
-	.monitor		= "LQ043T3DX02",
-	.modedb			= lcd_fb_modes,
-	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),
-	.hfmin			= 14915,
-	.hfmax			= 17638,
-	.vfmin			= 53,
-	.vfmax			= 61,
-	.dclkmax		= 9260000,
-};
-
-static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
-	.default_bpp		= 24,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_INVCLK_NORMAL
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,
-	.default_monspecs	= &lcd_fb_default_monspecs,
-	.guard_time		= 2,
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_LCD_KWH043GM08
-/* Sharp KWH043GM08-Fxx (or compatible) panel */
-static struct fb_videomode __initdata lcd_fb_modes[] = {
-	{
-		.name		= "480x272 @ 59.94Hz",
-		.refresh	= 59.94,
-		.xres		= 480,		.yres		= 272,
-		.pixclock	= KHZ2PICOS(9000),
-
-		.left_margin	= 2,		.right_margin	= 2,
-		.upper_margin	= 3,		.lower_margin	= 9,
-		.hsync_len	= 41,		.vsync_len	= 1,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
-	.manufacturer		= "FOR",
-	.monitor		= "KWH043GM08",
-	.modedb			= lcd_fb_modes,
-	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),
-	.hfmin			= 14915,
-	.hfmax			= 17638,
-	.vfmin			= 53,
-	.vfmax			= 61,
-	.dclkmax		= 9260000,
-};
-
-static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
-	.default_bpp		= 24,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_INVCLK_INVERTED
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,
-	.default_monspecs	= &lcd_fb_default_monspecs,
-	.guard_time		= 2,
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_AC97
-static struct ac97c_platform_data __initdata ac97c0_data = {
-	.reset_pin		= PIN_AC97_RST_N,
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
-/* NOTE: IRQ assignment relies on kernel module parameter */
-static struct platform_device rmt_ts_device = {
-	.name	= "ucb1400_ts",
-	.id	= -1,
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_BL_PWM
-/* PWM LEDs: LCD Backlight, etc */
-static struct pwm_lookup pwm_lookup[] = {
-	PWM_LOOKUP("at91sam9rl-pwm", PWM_CH_BL, "leds_pwm", "ds1",
-		   5000, PWM_POLARITY_INVERSED),
-};
-
-static struct led_pwm pwm_leds[] = {
-	{
-		.name = "backlight",
-		.max_brightness = 255,
-	},
-};
-
-static struct led_pwm_platform_data pwm_data = {
-	.num_leds       = ARRAY_SIZE(pwm_leds),
-	.leds           = pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
-	.name   = "leds_pwm",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &pwm_data,
-	},
-};
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
-static int ads7846_pendown_state(void)
-{
-	return !gpio_get_value( PIN_TS_EXTINT );	/* PENIRQ.*/
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model				= 7846,
-	.keep_vref_on			= 0,	/* Use external VREF pin */
-	.vref_delay_usecs		= 0,
-	.vref_mv			= 3300,	/* VREF = 3.3V */
-	.settle_delay_usecs		= 800,
-	.penirq_recheck_delay_usecs	= 800,
-	.x_plate_ohms			= 750,
-	.y_plate_ohms			= 300,
-	.pressure_max			= 4096,
-	.debounce_max			= 1,
-	.debounce_rep			= 0,
-	.debounce_tol			= (~0),
-	.get_pendown_state		= ads7846_pendown_state,
-	.filter				= NULL,
-	.filter_init			= NULL,
-};
-
-static struct spi_board_info spi01_board_info[] __initdata = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 31250*26,
-		.bus_num	= 0,
-		.chip_select	= 1,
-		.platform_data	= &ads_info,
-		.irq		= AT32_EXTINT(TS_IRQ),
-	},
-};
-#endif
-
-/* GPIO Keys: left, right, power, etc */
-static const struct gpio_keys_button rmt_gpio_keys_buttons[] = {
-	[0] = {
-		.type		= EV_KEY,
-		.code		= KEY_POWER,
-		.gpio		= PIN_PWR_SW_N,
-		.active_low	= 1,
-		.desc		= "power button",
-	},
-	[1] = {
-		.type		= EV_KEY,
-		.code		= KEY_LEFT,
-		.gpio		= PIN_PB_LEFT,
-		.active_low	= 1,
-		.desc		= "left button",
-	},
-	[2] = {
-		.type		= EV_KEY,
-		.code		= KEY_RIGHT,
-		.gpio		= PIN_PB_RIGHT,
-		.active_low	= 1,
-		.desc		= "right button",
-	},
-};
-
-static const struct gpio_keys_platform_data rmt_gpio_keys_data = {
-	.nbuttons =	ARRAY_SIZE(rmt_gpio_keys_buttons),
-	.buttons =	(void *) rmt_gpio_keys_buttons,
-};
-
-static struct platform_device rmt_gpio_keys = {
-	.name =		"gpio-keys",
-	.id =		-1,
-	.dev = {
-		.platform_data = (void *) &rmt_gpio_keys_data,
-	}
-};
-
-#ifdef CONFIG_BOARD_MRMT_RTC_I2C
-static struct i2c_board_info __initdata mrmt1_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-	.irq		= 0,
-};
-#endif
-
-static void mrmt_power_off(void)
-{
-	/* PWR_ON=0 will force power off */
-	gpio_set_value( PIN_PWR_ON, 0 );
-}
-
-static int __init mrmt1_init(void)
-{
-	gpio_set_value( PIN_PWR_ON, 1 );	/* Ensure PWR_ON is enabled */
-
-	pm_power_off = mrmt_power_off;
-
-	/* Setup USARTS (other than console) */
-	at32_map_usart(2, 1, 0);	/* USART 2: /dev/ttyS1, RMT1:DB9M */
-	at32_map_usart(3, 2, ATMEL_USART_RTS | ATMEL_USART_CTS);
-			/* USART 3: /dev/ttyS2, RMT1:Wireless, w/ RTS/CTS */
-	at32_add_device_usart(1);
-	at32_add_device_usart(2);
-
-	/* Select GPIO Key pins */
-	at32_select_gpio( PIN_PWR_SW_N, AT32_GPIOF_DEGLITCH);
-	at32_select_gpio( PIN_PB_LEFT, AT32_GPIOF_DEGLITCH);
-	at32_select_gpio( PIN_PB_RIGHT, AT32_GPIOF_DEGLITCH);
-	platform_device_register(&rmt_gpio_keys);
-
-#ifdef CONFIG_BOARD_MRMT_RTC_I2C
-	i2c_register_board_info(0, &mrmt1_i2c_rtc, 1);
-#endif
-
-#ifndef CONFIG_BOARD_MRMT_LCD_DISABLE
-	/* User "alternate" LCDC inferface on Port E & D */
-	/* NB: exclude LCDC_CC pin, as NGW100 reserves it for other use */
-	at32_add_device_lcdc(0, &rmt_lcdc_data,
-		fbmem_start, fbmem_size,
-		(ATMEL_LCDC_ALT_24BIT | ATMEL_LCDC_PE_DVAL ) );
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_AC97
-	at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
-	/* Select the Touchscreen interrupt pin mode */
-	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
-			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
-	irq_set_irq_type(AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING);
-	at32_spi_setup_slaves(0,spi01_board_info,ARRAY_SIZE(spi01_board_info));
-	spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));
-#endif
-
-#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
-	/* Select the Touchscreen interrupt pin mode */
-	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
-			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
-	platform_device_register(&rmt_ts_device);
-#endif
-
-	at32_select_gpio( PIN_LCD_DISP, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_LCD_DISP, "LCD_DISP" );
-	gpio_direction_output( PIN_LCD_DISP, 0 );	/* LCD DISP */
-#ifdef CONFIG_BOARD_MRMT_LCD_DISABLE
-	/* Keep Backlight and DISP off */
-	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_LCD_BL, "LCD_BL" );
-	gpio_direction_output( PIN_LCD_BL, 0 );		/* Backlight */
-#else
-	gpio_set_value( PIN_LCD_DISP, 1 );	/* DISP asserted first */
-#ifdef CONFIG_BOARD_MRMT_BL_PWM
-	/* Use PWM for Backlight controls */
-	at32_add_device_pwm(1 << PWM_CH_BL);
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-	platform_device_register(&leds_pwm);
-#else
-	/* Backlight always on */
-	udelay( 1 );
-	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_LCD_BL, "LCD_BL" );
-	gpio_direction_output( PIN_LCD_BL, 1 );
-#endif
-#endif
-
-	/* Make sure BT and Zigbee modules in reset */
-	at32_select_gpio( PIN_BT_RST, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_BT_RST, "BT_RST" );
-	gpio_direction_output( PIN_BT_RST, 1 );
-	/* BT Module in Reset */
-
-	at32_select_gpio( PIN_ZB_RST_N, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_ZB_RST_N, "ZB_RST_N" );
-	gpio_direction_output( PIN_ZB_RST_N, 0 );
-	/* XBee Module in Reset */
-
-#ifdef CONFIG_BOARD_MRMT_WIRELESS_ZB
-	udelay( 1000 );
-	/* Unreset the XBee Module */
-	gpio_set_value( PIN_ZB_RST_N, 1 );
-#endif
-#ifdef CONFIG_BOARD_MRMT_WIRELESS_BT
-	udelay( 1000 );
-	/* Unreset the BT Module */
-	gpio_set_value( PIN_BT_RST, 0 );
-#endif
-
-	return 0;
-}
-arch_initcall(mrmt1_init);
-
-static int __init mrmt1_early_init(void)
-{
-	/* To maintain power-on signal in case boot loader did not already */
-	at32_select_gpio( PIN_PWR_ON, AT32_GPIOF_OUTPUT );
-	gpio_request( PIN_PWR_ON, "PIN_PWR_ON" );
-	gpio_direction_output( PIN_PWR_ON, 1 );
-
-	return 0;
-}
-core_initcall(mrmt1_early_init);
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
deleted file mode 100644
index afeae8978a8d..000000000000
--- a/arch/avr32/boards/atngw100/setup.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Board-specific setup code for the ATNGW100 Network Gateway
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/etherdevice.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/atmel-mci.h>
-#include <linux/usb/atmel_usba_udc.h>
-
-#include <asm/io.h>
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-/* Oscillator frequencies. These are board-specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0] = 32768,	/* 32.768 kHz on RTC osc */
-	[1] = 20000000,	/* 20 MHz on osc0 */
-	[2] = 12000000,	/* 12 MHz on osc1 */
-};
-
-/*
- * The ATNGW100 mkII is very similar to the ATNGW100. Both have the AT32AP7000
- * chip on board; the difference is that the ATNGW100 mkII has 128 MB 32-bit
- * SDRAM (the ATNGW100 has 32 MB 16-bit SDRAM) and 256 MB 16-bit NAND flash
- * (the ATNGW100 has none.)
- *
- * The RAM difference is handled by the boot loader, so the only difference we
- * end up handling here is the NAND flash, EBI pin reservation and if LCDC or
- * MACB1 should be enabled.
- */
-#ifdef CONFIG_BOARD_ATNGW100_MKII
-#include <linux/mtd/partitions.h>
-#include <mach/smc.h>
-
-static struct smc_timing nand_timing __initdata = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 10,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 10,
-
-	.ncs_read_pulse		= 30,
-	.nrd_pulse		= 15,
-	.ncs_write_pulse	= 30,
-	.nwe_pulse		= 15,
-
-	.read_cycle		= 30,
-	.write_cycle		= 30,
-
-	.ncs_read_recover	= 0,
-	.nrd_recover		= 15,
-	.ncs_write_recover	= 0,
-	/* WE# high -> RE# low min 60 ns */
-	.nwe_recover		= 50,
-};
-
-static struct smc_config nand_config __initdata = {
-	.bus_width		= 2,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.nwait_mode		= 0,
-	.byte_write		= 0,
-	.tdf_cycles		= 2,
-	.tdf_mode		= 0,
-};
-
-static struct mtd_partition nand_partitions[] = {
-	{
-		.name		= "main",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-
-static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
-	.cle		= 21,
-	.ale		= 22,
-	.rdy_pin	= GPIO_PIN_PB(28),
-	.enable_pin	= GPIO_PIN_PE(23),
-	.bus_width_16	= true,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.parts		= nand_partitions,
-	.num_parts	= ARRAY_SIZE(nand_partitions),
-};
-#endif
-
-/* Initialized by bootloader-specific startup code. */
-struct tag *bootloader_tags __initdata;
-
-struct eth_addr {
-	u8 addr[6];
-};
-static struct eth_addr __initdata hw_addr[2];
-static struct macb_platform_data __initdata eth_data[2];
-
-static struct spi_board_info spi0_board_info[] __initdata = {
-	{
-		.modalias	= "mtd_dataflash",
-		.max_speed_hz	= 8000000,
-		.chip_select	= 0,
-	},
-};
-
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-#if defined(CONFIG_BOARD_ATNGW100_MKII)
-		.detect_pin	= GPIO_PIN_PC(25),
-		.wp_pin		= GPIO_PIN_PE(22),
-#else
-		.detect_pin	= GPIO_PIN_PC(25),
-		.wp_pin		= GPIO_PIN_PE(0),
-#endif
-	},
-};
-
-static struct usba_platform_data atngw100_usba_data __initdata = {
-#if defined(CONFIG_BOARD_ATNGW100_MKII)
-	.vbus_pin	= GPIO_PIN_PE(26),
-#else
-	.vbus_pin	= -ENODEV,
-#endif
-};
-
-/*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
- * ethernet address. But we need to keep it around for a while until
- * we can be reasonably sure the boot loader does this.
- *
- * The phy_id is ignored as the driver will probe for it.
- */
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-	int i;
-
-	i = tag->u.ethernet.mac_index;
-	if (i < ARRAY_SIZE(hw_addr))
-		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-		       sizeof(hw_addr[i].addr));
-
-	return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
-static void __init set_hw_addr(struct platform_device *pdev)
-{
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	const u8 *addr;
-	void __iomem *regs;
-	struct clk *pclk;
-
-	if (!res)
-		return;
-	if (pdev->id >= ARRAY_SIZE(hw_addr))
-		return;
-
-	addr = hw_addr[pdev->id].addr;
-	if (!is_valid_ether_addr(addr))
-		return;
-
-	/*
-	 * Since this is board-specific code, we'll cheat and use the
-	 * physical address directly as we happen to know that it's
-	 * the same as the virtual address.
-	 */
-	regs = (void __iomem __force *)res->start;
-	pclk = clk_get(&pdev->dev, "pclk");
-	if (IS_ERR(pclk))
-		return;
-
-	clk_enable(pclk);
-	__raw_writel((addr[3] << 24) | (addr[2] << 16)
-		     | (addr[1] << 8) | addr[0], regs + 0x98);
-	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-	clk_disable(pclk);
-	clk_put(pclk);
-}
-
-void __init setup_board(void)
-{
-	at32_map_usart(1, 0, 0);	/* USART 1: /dev/ttyS0, DB9 */
-	at32_setup_serial_console(0);
-}
-
-static const struct gpio_led ngw_leds[] = {
-	{ .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1,
-		.default_trigger = "heartbeat",
-	},
-	{ .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, },
-	{ .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, },
-};
-
-static const struct gpio_led_platform_data ngw_led_data = {
-	.num_leds =	ARRAY_SIZE(ngw_leds),
-	.leds =		(void *) ngw_leds,
-};
-
-static struct platform_device ngw_gpio_leds = {
-	.name =		"leds-gpio",
-	.id =		-1,
-	.dev = {
-		.platform_data = (void *) &ngw_led_data,
-	}
-};
-
-static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin		= GPIO_PIN_PA(6),
-	.scl_pin		= GPIO_PIN_PA(7),
-	.sda_is_open_drain	= 1,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,	/* close to 100 kHz */
-};
-
-static struct platform_device i2c_gpio_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &i2c_gpio_data,
-	},
-};
-
-static struct i2c_board_info __initdata i2c_info[] = {
-	/* NOTE:  original ATtiny24 firmware is at address 0x0b */
-};
-
-static int __init atngw100_init(void)
-{
-	unsigned	i;
-
-	/*
-	 * ATNGW100 mkII uses 32-bit SDRAM interface. Reserve the
-	 * SDRAM-specific pins so that nobody messes with them.
-	 */
-#ifdef CONFIG_BOARD_ATNGW100_MKII
-	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
-
-	smc_set_timing(&nand_config, &nand_timing);
-	smc_set_configuration(3, &nand_config);
-	at32_add_device_nand(0, &atngw100mkii_nand_data);
-#endif
-
-	at32_add_device_usart(0);
-
-	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-#ifndef CONFIG_BOARD_ATNGW100_MKII_LCD
-	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
-#endif
-
-	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-	at32_add_device_mci(0, &mci0_data);
-	at32_add_device_usba(0, &atngw100_usba_data);
-
-	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
-		at32_select_gpio(ngw_leds[i].gpio,
-				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-	}
-	platform_device_register(&ngw_gpio_leds);
-
-	/* all these i2c/smbus pins should have external pullups for
-	 * open-drain sharing among all I2C devices.  SDA and SCL do;
-	 * PB28/EXTINT3 (ATNGW100) and PE21 (ATNGW100 mkII) doesn't; it should
-	 * be SMBALERT# (for PMBus), but it's not available off-board.
-	 */
-#ifdef CONFIG_BOARD_ATNGW100_MKII
-	at32_select_periph(GPIO_PIOE_BASE, 1 << 21, 0, AT32_GPIOF_PULLUP);
-#else
-	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
-#endif
-	at32_select_gpio(i2c_gpio_data.sda_pin,
-		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-	at32_select_gpio(i2c_gpio_data.scl_pin,
-		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-	platform_device_register(&i2c_gpio_device);
-	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
-
-	return 0;
-}
-postcore_initcall(atngw100_init);
-
-static int __init atngw100_arch_init(void)
-{
-	/* PB30 (ATNGW100) and PE30 (ATNGW100 mkII) is the otherwise unused
-	 * jumper on the mainboard, with an external pullup; the jumper grounds
-	 * it. Use it however you like, including letting U-Boot or Linux tweak
-	 * boot sequences.
-	 */
-#ifdef CONFIG_BOARD_ATNGW100_MKII
-	at32_select_gpio(GPIO_PIN_PE(30), 0);
-	gpio_request(GPIO_PIN_PE(30), "j15");
-	gpio_direction_input(GPIO_PIN_PE(30));
-	gpio_export(GPIO_PIN_PE(30), false);
-#else
-	at32_select_gpio(GPIO_PIN_PB(30), 0);
-	gpio_request(GPIO_PIN_PB(30), "j15");
-	gpio_direction_input(GPIO_PIN_PB(30));
-	gpio_export(GPIO_PIN_PB(30), false);
-#endif
-
-	/* set_irq_type() after the arch_initcall for EIC has run, and
-	 * before the I2C subsystem could try using this IRQ.
-	 */
-	return irq_set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING);
-}
-arch_initcall(atngw100_arch_init);
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
deleted file mode 100644
index 8dc48214f0b7..000000000000
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-# STK1000 customization
-
-if BOARD_ATSTK1000
-
-choice
-	prompt "ATSTK1000 CPU daughterboard type"
-	default BOARD_ATSTK1002
-
-config BOARD_ATSTK1002
-	bool "ATSTK1002"
-	select CPU_AT32AP7000
-
-config BOARD_ATSTK1003
-	bool "ATSTK1003"
-	select CPU_AT32AP7001
-
-config BOARD_ATSTK1004
-	bool "ATSTK1004"
-	select CPU_AT32AP7002
-
-config BOARD_ATSTK1006
-	bool "ATSTK1006"
-	select CPU_AT32AP7000
-
-endchoice
-
-
-config BOARD_ATSTK100X_CUSTOM
-	bool "Non-default STK1002/STK1003/STK1004 jumper settings"
-	help
-	  You will normally leave the jumpers on the CPU card at their
-	  default settings.  If you need to use certain peripherals,
-	  you will need to change some of those jumpers.
-
-if BOARD_ATSTK100X_CUSTOM
-
-config BOARD_ATSTK100X_SW1_CUSTOM
-	bool "SW1: use SSC1 (not SPI0)"
-	help
-	  This also prevents using the external DAC as an audio interface,
-	  and means you can't initialize the on-board QVGA display.
-
-config BOARD_ATSTK100X_SW2_CUSTOM
-	bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
-	help
-	  If you change this you'll want an updated boot loader putting
-	  the console on UART-C not UART-A.
-
-config BOARD_ATSTK100X_SW3_CUSTOM
-	bool "SW3: use TIMER1 (not SSC0 and GCLK)"
-	help
-	  This also prevents using the external DAC as an audio interface.
-
-config BOARD_ATSTK100X_SW4_CUSTOM
-	bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
-	help
-	  To use the camera interface you'll need a custom card (on the
-	  PCI-format connector) connect a video sensor.
-
-config BOARD_ATSTK1002_SW5_CUSTOM
-	bool "SW5: use MACB1 (not LCDC)"
-	depends on BOARD_ATSTK1002
-
-config BOARD_ATSTK1002_SW6_CUSTOM
-	bool "SW6: more GPIOs (not MACB0)"
-	depends on BOARD_ATSTK1002
-
-endif	# custom
-
-config BOARD_ATSTK100X_SPI1
-	bool "Configure SPI1 controller"
-	depends on !BOARD_ATSTK100X_SW4_CUSTOM
-	help
-	  All the signals for the second SPI controller are available on
-	  GPIO lines and accessed through the J1 jumper block.  Say "y"
-	  here to configure that SPI controller.
-
-config BOARD_ATSTK1000_J2_LED
-	bool
-	default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
-
-choice
-	prompt "LEDs connected to J2:"
-	depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
-	optional
-	help
-	  Select this if you have jumpered the J2 jumper block to the
-	  LED0..LED7 amber leds, or to the RGB leds, using a ten-pin
-	  IDC cable.  A default "heartbeat" trigger is provided, but
-	  you can of course override this.
-
-config BOARD_ATSTK1000_J2_LED8
-	bool "LED0..LED7"
-	help
-	  Select this if J2 is jumpered to LED0..LED7 amber leds.
-
-config BOARD_ATSTK1000_J2_RGB
-	bool "RGB leds"
-	help
-	  Select this if J2 is jumpered to the RGB leds.
-
-endchoice
-
-config BOARD_ATSTK1000_EXTDAC
-	bool
-	depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
-	default y
-
-endif	# stk 1000
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
deleted file mode 100644
index edecee03742d..000000000000
--- a/arch/avr32/boards/atstk1000/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y				+= setup.o flash.o
-obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
-obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
-obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
-obj-$(CONFIG_BOARD_ATSTK1006)	+= atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
deleted file mode 100644
index 653cc09e536c..000000000000
--- a/arch/avr32/boards/atstk1000/atstk1000.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * ATSTK1000 setup code: Daughterboard interface
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-
-extern struct atmel_lcdfb_pdata atstk1000_lcdc_data;
-
-void atstk1000_setup_j2_leds(void);
-
-#endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
deleted file mode 100644
index 6c80aba7bf96..000000000000
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * ATSTK1002/ATSTK1006 daughterboard-specific init code
- *
- * Copyright (C) 2005-2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/atmel-mci.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/io.h>
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-#include "atstk1000.h"
-
-/* Oscillator frequencies. These are board specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0] = 32768,	/* 32.768 kHz on RTC osc */
-	[1] = 20000000,	/* 20 MHz on osc0 */
-	[2] = 12000000,	/* 12 MHz on osc1 */
-};
-
-/*
- * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
- * have the AT32AP7000 chip on board; the difference is that the
- * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
- * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
- * none.)
- *
- * The RAM difference is handled by the boot loader, so the only
- * difference we end up handling here is the NAND flash.
- */
-#ifdef CONFIG_BOARD_ATSTK1006
-#include <linux/mtd/partitions.h>
-#include <mach/smc.h>
-
-static struct smc_timing nand_timing __initdata = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 10,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 10,
-
-	.ncs_read_pulse		= 30,
-	.nrd_pulse		= 15,
-	.ncs_write_pulse	= 30,
-	.nwe_pulse		= 15,
-
-	.read_cycle		= 30,
-	.write_cycle		= 30,
-
-	.ncs_read_recover	= 0,
-	.nrd_recover		= 15,
-	.ncs_write_recover	= 0,
-	/* WE# high -> RE# low min 60 ns */
-	.nwe_recover		= 50,
-};
-
-static struct smc_config nand_config __initdata = {
-	.bus_width		= 1,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.nwait_mode		= 0,
-	.byte_write		= 0,
-	.tdf_cycles		= 2,
-	.tdf_mode		= 0,
-};
-
-static struct mtd_partition nand_partitions[] = {
-	{
-		.name		= "main",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data atstk1006_nand_data __initdata = {
-	.cle		= 21,
-	.ale		= 22,
-	.rdy_pin	= GPIO_PIN_PB(30),
-	.enable_pin	= GPIO_PIN_PB(29),
-	.ecc_mode	= NAND_ECC_SOFT,
-	.parts		= nand_partitions,
-	.num_parts	= ARRAY_SIZE(nand_partitions),
-};
-#endif
-
-struct eth_addr {
-	u8 addr[6];
-};
-
-static struct eth_addr __initdata hw_addr[2];
-static struct macb_platform_data __initdata eth_data[2] = {
-	{
-		/*
-		 * The MDIO pullups on STK1000 are a bit too weak for
-		 * the autodetection to work properly, so we have to
-		 * mask out everything but the correct address.
-		 */
-		.phy_mask	= ~(1U << 16),
-	},
-	{
-		.phy_mask	= ~(1U << 17),
-	},
-};
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static struct at73c213_board_info at73c213_data = {
-	.ssc_id		= 0,
-	.shortname	= "AVR32 STK1000 external DAC",
-};
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-static struct spi_board_info spi0_board_info[] __initdata = {
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-	{
-		/* AT73C213 */
-		.modalias	= "at73c213",
-		.max_speed_hz	= 200000,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_1,
-		.platform_data	= &at73c213_data,
-	},
-#endif
-	{
-		/* QVGA display */
-		.modalias	= "ltv350qv",
-		.max_speed_hz	= 16000000,
-		.chip_select	= 1,
-		.mode		= SPI_MODE_3,
-	},
-};
-#endif
-
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-static struct spi_board_info spi1_board_info[] __initdata = { {
-	/* patch in custom entries here */
-} };
-#endif
-
-/*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
- * ethernet address. But we need to keep it around for a while until
- * we can be reasonably sure the boot loader does this.
- *
- * The phy_id is ignored as the driver will probe for it.
- */
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-	int i;
-
-	i = tag->u.ethernet.mac_index;
-	if (i < ARRAY_SIZE(hw_addr))
-		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-		       sizeof(hw_addr[i].addr));
-
-	return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
-static void __init set_hw_addr(struct platform_device *pdev)
-{
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	const u8 *addr;
-	void __iomem *regs;
-	struct clk *pclk;
-
-	if (!res)
-		return;
-	if (pdev->id >= ARRAY_SIZE(hw_addr))
-		return;
-
-	addr = hw_addr[pdev->id].addr;
-	if (!is_valid_ether_addr(addr))
-		return;
-
-	/*
-	 * Since this is board-specific code, we'll cheat and use the
-	 * physical address directly as we happen to know that it's
-	 * the same as the virtual address.
-	 */
-	regs = (void __iomem __force *)res->start;
-	pclk = clk_get(&pdev->dev, "pclk");
-	if (IS_ERR(pclk))
-		return;
-
-	clk_enable(pclk);
-	__raw_writel((addr[3] << 24) | (addr[2] << 16)
-		     | (addr[1] << 8) | addr[0], regs + 0x98);
-	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-	clk_disable(pclk);
-	clk_put(pclk);
-}
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static void __init atstk1002_setup_extdac(void)
-{
-	struct clk *gclk;
-	struct clk *pll;
-
-	gclk = clk_get(NULL, "gclk0");
-	if (IS_ERR(gclk))
-		goto err_gclk;
-	pll = clk_get(NULL, "pll0");
-	if (IS_ERR(pll))
-		goto err_pll;
-
-	if (clk_set_parent(gclk, pll)) {
-		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-		goto err_set_clk;
-	}
-
-	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
-	at73c213_data.dac_clk = gclk;
-
-err_set_clk:
-	clk_put(pll);
-err_pll:
-	clk_put(gclk);
-err_gclk:
-	return;
-}
-#else
-static void __init atstk1002_setup_extdac(void)
-{
-
-}
-#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
-
-void __init setup_board(void)
-{
-#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_map_usart(0, 1, 0);	/* USART 0/B: /dev/ttyS1, IRDA */
-#else
-	at32_map_usart(1, 0, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
-#endif
-	/* USART 2/unused: expansion connector */
-	at32_map_usart(3, 2, 0);	/* USART 3/C: /dev/ttyS2, DB9 */
-
-	at32_setup_serial_console(0);
-}
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-
-/* MMC card detect requires MACB0 *NOT* be used */
-#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
-		.detect_pin	= GPIO_PIN_PC(14), /* gpio30/sdcd */
-		.wp_pin		= GPIO_PIN_PC(15), /* gpio31/sdwp */
-#else
-		.detect_pin	= -ENODEV,
-		.wp_pin		= -ENODEV,
-#endif	/* SW6 for sd{cd,wp} routing */
-	},
-};
-
-#endif	/* SW2 for MMC signal routing */
-
-static int __init atstk1002_init(void)
-{
-	/*
-	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
-	 * SDRAM-specific pins so that nobody messes with them.
-	 */
-	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
-
-#ifdef CONFIG_BOARD_ATSTK1006
-	smc_set_timing(&nand_config, &nand_timing);
-	smc_set_configuration(3, &nand_config);
-	at32_add_device_nand(0, &atstk1006_nand_data);
-#endif
-
-#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_usart(1);
-#else
-	at32_add_device_usart(0);
-#endif
-	at32_add_device_usart(2);
-
-#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
-	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-#endif
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-#endif
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-#endif
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0, &mci0_data);
-#endif
-#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
-	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
-#else
-	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size,
-			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
-#endif
-	at32_add_device_usba(0, NULL);
-#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
-	at32_add_device_ssc(0, ATMEL_SSC_TX);
-#endif
-
-	atstk1000_setup_j2_leds();
-	atstk1002_setup_extdac();
-
-	return 0;
-}
-postcore_initcall(atstk1002_init);
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
deleted file mode 100644
index ff7e23298827..000000000000
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * ATSTK1003 daughterboard-specific init code
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <linux/spi/at73c213.h>
-#include <linux/spi/spi.h>
-#include <linux/atmel-mci.h>
-
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-#include "atstk1000.h"
-
-/* Oscillator frequencies. These are board specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0] = 32768,	/* 32.768 kHz on RTC osc */
-	[1] = 20000000,	/* 20 MHz on osc0 */
-	[2] = 12000000,	/* 12 MHz on osc1 */
-};
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static struct at73c213_board_info at73c213_data = {
-	.ssc_id		= 0,
-	.shortname	= "AVR32 STK1000 external DAC",
-};
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-static struct spi_board_info spi0_board_info[] __initdata = {
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-	{
-		/* AT73C213 */
-		.modalias	= "at73c213",
-		.max_speed_hz	= 200000,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_1,
-		.platform_data	= &at73c213_data,
-	},
-#endif
-	/*
-	 * We can control the LTV350QV LCD panel, but it isn't much
-	 * point since we don't have an LCD controller...
-	 */
-};
-#endif
-
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-static struct spi_board_info spi1_board_info[] __initdata = { {
-	/* patch in custom entries here */
-} };
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
-		.wp_pin		= -ENODEV,
-	},
-};
-#endif
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static void __init atstk1003_setup_extdac(void)
-{
-	struct clk *gclk;
-	struct clk *pll;
-
-	gclk = clk_get(NULL, "gclk0");
-	if (IS_ERR(gclk))
-		goto err_gclk;
-	pll = clk_get(NULL, "pll0");
-	if (IS_ERR(pll))
-		goto err_pll;
-
-	if (clk_set_parent(gclk, pll)) {
-		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-		goto err_set_clk;
-	}
-
-	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
-	at73c213_data.dac_clk = gclk;
-
-err_set_clk:
-	clk_put(pll);
-err_pll:
-	clk_put(gclk);
-err_gclk:
-	return;
-}
-#else
-static void __init atstk1003_setup_extdac(void)
-{
-
-}
-#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
-
-void __init setup_board(void)
-{
-#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_map_usart(0, 1, 0);	/* USART 0/B: /dev/ttyS1, IRDA */
-#else
-	at32_map_usart(1, 0, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
-#endif
-	/* USART 2/unused: expansion connector */
-	at32_map_usart(3, 2, 0);	/* USART 3/C: /dev/ttyS2, DB9 */
-
-	at32_setup_serial_console(0);
-}
-
-static int __init atstk1003_init(void)
-{
-	/*
-	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
-	 * SDRAM-specific pins so that nobody messes with them.
-	 */
-	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
-
-#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_usart(1);
-#else
-	at32_add_device_usart(0);
-#endif
-	at32_add_device_usart(2);
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-#endif
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-#endif
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0, &mci0_data);
-#endif
-	at32_add_device_usba(0, NULL);
-#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
-	at32_add_device_ssc(0, ATMEL_SSC_TX);
-#endif
-
-	atstk1000_setup_j2_leds();
-	atstk1003_setup_extdac();
-
-	return 0;
-}
-postcore_initcall(atstk1003_init);
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
deleted file mode 100644
index 69a9f0f08c6e..000000000000
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * ATSTK1003 daughterboard-specific init code
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <linux/spi/at73c213.h>
-#include <linux/spi/spi.h>
-#include <linux/atmel-mci.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-#include "atstk1000.h"
-
-/* Oscillator frequencies. These are board specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0] = 32768,	/* 32.768 kHz on RTC osc */
-	[1] = 20000000,	/* 20 MHz on osc0 */
-	[2] = 12000000,	/* 12 MHz on osc1 */
-};
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static struct at73c213_board_info at73c213_data = {
-	.ssc_id		= 0,
-	.shortname	= "AVR32 STK1000 external DAC",
-};
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-static struct spi_board_info spi0_board_info[] __initdata = {
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-	{
-		/* AT73C213 */
-		.modalias	= "at73c213",
-		.max_speed_hz	= 200000,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_1,
-		.platform_data	= &at73c213_data,
-	},
-#endif
-	{
-		/* QVGA display */
-		.modalias	= "ltv350qv",
-		.max_speed_hz	= 16000000,
-		.chip_select	= 1,
-		.mode		= SPI_MODE_3,
-	},
-};
-#endif
-
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-static struct spi_board_info spi1_board_info[] __initdata = { {
-	/* patch in custom entries here */
-} };
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
-		.wp_pin		= -ENODEV,
-	},
-};
-#endif
-
-#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
-static void __init atstk1004_setup_extdac(void)
-{
-	struct clk *gclk;
-	struct clk *pll;
-
-	gclk = clk_get(NULL, "gclk0");
-	if (IS_ERR(gclk))
-		goto err_gclk;
-	pll = clk_get(NULL, "pll0");
-	if (IS_ERR(pll))
-		goto err_pll;
-
-	if (clk_set_parent(gclk, pll)) {
-		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-		goto err_set_clk;
-	}
-
-	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
-	at73c213_data.dac_clk = gclk;
-
-err_set_clk:
-	clk_put(pll);
-err_pll:
-	clk_put(gclk);
-err_gclk:
-	return;
-}
-#else
-static void __init atstk1004_setup_extdac(void)
-{
-
-}
-#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
-
-void __init setup_board(void)
-{
-#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_map_usart(0, 1, 0);	/* USART 0/B: /dev/ttyS1, IRDA */
-#else
-	at32_map_usart(1, 0, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
-#endif
-	/* USART 2/unused: expansion connector */
-	at32_map_usart(3, 2, 0);	/* USART 3/C: /dev/ttyS2, DB9 */
-
-	at32_setup_serial_console(0);
-}
-
-static int __init atstk1004_init(void)
-{
-#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_usart(1);
-#else
-	at32_add_device_usart(0);
-#endif
-	at32_add_device_usart(2);
-
-#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
-	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-#endif
-#ifdef CONFIG_BOARD_ATSTK100X_SPI1
-	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-#endif
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0, &mci0_data);
-#endif
-	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size,
-			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
-	at32_add_device_usba(0, NULL);
-#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
-	at32_add_device_ssc(0, ATMEL_SSC_TX);
-#endif
-
-	atstk1000_setup_j2_leds();
-	atstk1004_setup_extdac();
-
-	return 0;
-}
-postcore_initcall(atstk1004_init);
diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
deleted file mode 100644
index 6e4d561977ff..000000000000
--- a/arch/avr32/boards/atstk1000/flash.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * ATSTK1000 board-specific flash initialization
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/smc.h>
-
-static struct smc_timing flash_timing __initdata = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 40,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 10,
-
-	.ncs_read_pulse		= 80,
-	.nrd_pulse		= 40,
-	.ncs_write_pulse	= 65,
-	.nwe_pulse		= 55,
-
-	.read_cycle		= 120,
-	.write_cycle		= 120,
-};
-
-static struct smc_config flash_config __initdata = {
-	.bus_width		= 2,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.byte_write		= 1,
-};
-
-static struct mtd_partition flash_parts[] = {
-	{
-		.name           = "u-boot",
-		.offset         = 0x00000000,
-		.size           = 0x00020000,           /* 128 KiB */
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "root",
-		.offset         = 0x00020000,
-		.size           = 0x007d0000,
-	},
-	{
-		.name           = "env",
-		.offset         = 0x007f0000,
-		.size           = 0x00010000,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data flash_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(flash_parts),
-	.parts		= flash_parts,
-};
-
-static struct resource flash_resource = {
-	.start		= 0x00000000,
-	.end		= 0x007fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &flash_resource,
-	.num_resources	= 1,
-	.dev		= {
-		.platform_data = &flash_data,
-	},
-};
-
-/* This needs to be called after the SMC has been initialized */
-static int __init atstk1000_flash_init(void)
-{
-	int ret;
-
-	smc_set_timing(&flash_config, &flash_timing);
-	ret = smc_set_configuration(0, &flash_config);
-	if (ret < 0) {
-		printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
-		return ret;
-	}
-
-	platform_device_register(&flash_device);
-
-	return 0;
-}
-device_initcall(atstk1000_flash_init);
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
deleted file mode 100644
index b6b88f5e0b43..000000000000
--- a/arch/avr32/boards/atstk1000/setup.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * ATSTK1000 board-specific setup code.
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/bootmem.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/linkage.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/portmux.h>
-
-#include "atstk1000.h"
-
-/* Initialized by bootloader-specific startup code. */
-struct tag *bootloader_tags __initdata;
-
-static struct fb_videomode __initdata ltv350qv_modes[] = {
-	{
-		.name		= "320x240 @ 75",
-		.refresh	= 75,
-		.xres		= 320,		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6891),
-
-		.left_margin	= 17,		.right_margin	= 33,
-		.upper_margin	= 10,		.lower_margin	= 10,
-		.hsync_len	= 16,		.vsync_len	= 1,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata atstk1000_default_monspecs = {
-	.manufacturer		= "SNG",
-	.monitor		= "LTV350QV",
-	.modedb			= ltv350qv_modes,
-	.modedb_len		= ARRAY_SIZE(ltv350qv_modes),
-	.hfmin			= 14820,
-	.hfmax			= 22230,
-	.vfmin			= 60,
-	.vfmax			= 90,
-	.dclkmax		= 30000000,
-};
-
-struct atmel_lcdfb_pdata __initdata atstk1000_lcdc_data = {
-	.default_bpp		= 24,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_INVCLK
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.default_monspecs	= &atstk1000_default_monspecs,
-	.guard_time		= 2,
-};
-
-#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
-#include <linux/leds.h>
-
-static struct gpio_led stk1000_j2_led[] = {
-#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
-#define LEDSTRING "J2 jumpered to LED8"
-	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
-	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
-	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
-	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
-	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
-	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
-	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
-	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
-			.default_trigger = "heartbeat", },
-#else	/* RGB */
-#define LEDSTRING "J2 jumpered to RGB LEDs"
-	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
-	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
-	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
-
-	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
-			.default_trigger = "heartbeat", },
-	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
-	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
-			.default_trigger = "heartbeat", },
-	/* PB16, PB30 unused */
-#endif
-};
-
-static struct gpio_led_platform_data stk1000_j2_led_data = {
-	.num_leds	= ARRAY_SIZE(stk1000_j2_led),
-	.leds		= stk1000_j2_led,
-};
-
-static struct platform_device stk1000_j2_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 2,	/* gpio block J2 */
-	.dev		= {
-		.platform_data	= &stk1000_j2_led_data,
-	},
-};
-
-void __init atstk1000_setup_j2_leds(void)
-{
-	unsigned	i;
-
-	for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
-		at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
-
-	printk("STK1000: " LEDSTRING "\n");
-	platform_device_register(&stk1000_j2_led_dev);
-}
-#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
-void __init atstk1000_setup_j2_leds(void)
-{
-
-}
-#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
diff --git a/arch/avr32/boards/favr-32/Kconfig b/arch/avr32/boards/favr-32/Kconfig
deleted file mode 100644
index 2c83d1ddcaec..000000000000
--- a/arch/avr32/boards/favr-32/Kconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-# Favr-32 customization
-
-if BOARD_FAVR_32
-
-config BOARD_FAVR32_ABDAC_RATE
-	int "DAC target rate"
-	default 44100
-	range 32000 50000
-	help
-	  Specify the target rate the internal DAC should try to match. This
-	  will use PLL1 to generate a frequency as close as possible to this
-	  rate.
-
-	  Must be within the range 32000 to 50000, which should be suitable to
-	  generate most other frequencies in power of 2 steps.
-
-	  Ex:
-		48000 will also suit 24000 and 12000
-		44100 will also suit 22050 and 11025
-		32000 will also suit 16000 and 8000
-
-endif # BOARD_FAVR_32
diff --git a/arch/avr32/boards/favr-32/Makefile b/arch/avr32/boards/favr-32/Makefile
deleted file mode 100644
index 234f21508e4b..000000000000
--- a/arch/avr32/boards/favr-32/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	+= setup.o flash.o
diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c
deleted file mode 100644
index 604bbd5e41d9..000000000000
--- a/arch/avr32/boards/favr-32/flash.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Favr-32 board-specific flash initialization
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/smc.h>
-
-static struct smc_timing flash_timing __initdata = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 40,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 10,
-
-	.ncs_read_pulse		= 80,
-	.nrd_pulse		= 40,
-	.ncs_write_pulse	= 65,
-	.nwe_pulse		= 55,
-
-	.read_cycle		= 120,
-	.write_cycle		= 120,
-};
-
-static struct smc_config flash_config __initdata = {
-	.bus_width		= 2,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.byte_write		= 1,
-};
-
-static struct mtd_partition flash_parts[] = {
-	{
-		.name           = "u-boot",
-		.offset         = 0x00000000,
-		.size           = 0x00020000,           /* 128 KiB */
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "root",
-		.offset         = 0x00020000,
-		.size           = 0x007d0000,
-	},
-	{
-		.name           = "env",
-		.offset         = 0x007f0000,
-		.size           = 0x00010000,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data flash_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(flash_parts),
-	.parts		= flash_parts,
-};
-
-static struct resource flash_resource = {
-	.start		= 0x00000000,
-	.end		= 0x007fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &flash_resource,
-	.num_resources	= 1,
-	.dev		= {
-		.platform_data = &flash_data,
-	},
-};
-
-/* This needs to be called after the SMC has been initialized */
-static int __init favr32_flash_init(void)
-{
-	int ret;
-
-	smc_set_timing(&flash_config, &flash_timing);
-	ret = smc_set_configuration(0, &flash_config);
-	if (ret < 0) {
-		printk(KERN_ERR "Favr-32: failed to set NOR flash timing\n");
-		return ret;
-	}
-
-	platform_device_register(&flash_device);
-
-	return 0;
-}
-device_initcall(favr32_flash_init);
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
deleted file mode 100644
index 234cb071c601..000000000000
--- a/arch/avr32/boards/favr-32/setup.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Favr-32 board-specific setup code.
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/etherdevice.h>
-#include <linux/bootmem.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/linkage.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/atmel-mci.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <sound/atmel-abdac.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/init.h>
-#include <mach/board.h>
-#include <mach/portmux.h>
-
-#define PWM_BL_CH 2
-
-/* Oscillator frequencies. These are board-specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0] = 32768,	/* 32.768 kHz on RTC osc */
-	[1] = 20000000,	/* 20 MHz on osc0 */
-	[2] = 12000000,	/* 12 MHz on osc1 */
-};
-
-/* Initialized by bootloader-specific startup code. */
-struct tag *bootloader_tags __initdata;
-
-static struct atmel_abdac_pdata __initdata abdac0_data = {
-};
-
-struct eth_addr {
-	u8 addr[6];
-};
-static struct eth_addr __initdata hw_addr[1];
-static struct macb_platform_data __initdata eth_data[1] = {
-	{
-		.phy_mask	= ~(1U << 1),
-	},
-};
-
-static int ads7843_get_pendown_state(void)
-{
-	return !gpio_get_value(GPIO_PIN_PB(3));
-}
-
-static struct ads7846_platform_data ads7843_data = {
-	.model			= 7843,
-	.get_pendown_state	= ads7843_get_pendown_state,
-	.pressure_max		= 255,
-	/*
-	 * Values below are for debounce filtering, these can be experimented
-	 * with further.
-	 */
-	.debounce_max		= 20,
-	.debounce_rep		= 4,
-	.debounce_tol		= 5,
-
-	.keep_vref_on		= true,
-	.settle_delay_usecs	= 500,
-	.penirq_recheck_delay_usecs = 100,
-};
-
-static struct spi_board_info __initdata spi1_board_info[] = {
-	{
-		/* ADS7843 touch controller */
-		.modalias	= "ads7846",
-		.max_speed_hz	= 2000000,
-		.chip_select	= 0,
-		.bus_num	= 1,
-		.platform_data	= &ads7843_data,
-	},
-};
-
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
-		.wp_pin		= -ENODEV,
-	},
-};
-
-static struct fb_videomode __initdata lb104v03_modes[] = {
-	{
-		.name		= "640x480 @ 50",
-		.refresh	= 50,
-		.xres		= 640,		.yres		= 480,
-		.pixclock	= KHZ2PICOS(25100),
-
-		.left_margin	= 90,		.right_margin	= 70,
-		.upper_margin	= 30,		.lower_margin	= 15,
-		.hsync_len	= 12,		.vsync_len	= 2,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata favr32_default_monspecs = {
-	.manufacturer		= "LG",
-	.monitor		= "LB104V03",
-	.modedb			= lb104v03_modes,
-	.modedb_len		= ARRAY_SIZE(lb104v03_modes),
-	.hfmin			= 27273,
-	.hfmax			= 31111,
-	.vfmin			= 45,
-	.vfmax			= 60,
-	.dclkmax		= 28000000,
-};
-
-struct atmel_lcdfb_pdata __initdata favr32_lcdc_data = {
-	.default_bpp		= 16,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.default_monspecs	= &favr32_default_monspecs,
-	.guard_time		= 2,
-};
-
-static struct gpio_led favr32_leds[] = {
-	{
-		.name		 = "green",
-		.gpio		 = GPIO_PIN_PE(19),
-		.default_trigger = "heartbeat",
-		.active_low	 = 1,
-	},
-	{
-		.name		 = "red",
-		.gpio		 = GPIO_PIN_PE(20),
-		.active_low	 = 1,
-	},
-};
-
-static struct gpio_led_platform_data favr32_led_data = {
-	.num_leds	= ARRAY_SIZE(favr32_leds),
-	.leds		= favr32_leds,
-};
-
-static struct platform_device favr32_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &favr32_led_data,
-	},
-};
-
-/*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
- * ethernet address. But we need to keep it around for a while until
- * we can be reasonably sure the boot loader does this.
- *
- * The phy_id is ignored as the driver will probe for it.
- */
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-	int i;
-
-	i = tag->u.ethernet.mac_index;
-	if (i < ARRAY_SIZE(hw_addr))
-		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-		       sizeof(hw_addr[i].addr));
-
-	return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
-static void __init set_hw_addr(struct platform_device *pdev)
-{
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	const u8 *addr;
-	void __iomem *regs;
-	struct clk *pclk;
-
-	if (!res)
-		return;
-	if (pdev->id >= ARRAY_SIZE(hw_addr))
-		return;
-
-	addr = hw_addr[pdev->id].addr;
-	if (!is_valid_ether_addr(addr))
-		return;
-
-	/*
-	 * Since this is board-specific code, we'll cheat and use the
-	 * physical address directly as we happen to know that it's
-	 * the same as the virtual address.
-	 */
-	regs = (void __iomem __force *)res->start;
-	pclk = clk_get(&pdev->dev, "pclk");
-	if (IS_ERR(pclk))
-		return;
-
-	clk_enable(pclk);
-	__raw_writel((addr[3] << 24) | (addr[2] << 16)
-		     | (addr[1] << 8) | addr[0], regs + 0x98);
-	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-	clk_disable(pclk);
-	clk_put(pclk);
-}
-
-void __init favr32_setup_leds(void)
-{
-	unsigned i;
-
-	for (i = 0; i < ARRAY_SIZE(favr32_leds); i++)
-		at32_select_gpio(favr32_leds[i].gpio, AT32_GPIOF_OUTPUT);
-
-	platform_device_register(&favr32_led_dev);
-}
-
-static struct pwm_lookup pwm_lookup[] = {
-	PWM_LOOKUP("at91sam9rl-pwm", PWM_BL_CH, "pwm-backlight.0", NULL,
-		   5000, PWM_POLARITY_INVERSED),
-};
-
-static struct regulator_consumer_supply fixed_power_consumers[] = {
-	REGULATOR_SUPPLY("power", "pwm-backlight.0"),
-};
-
-static struct platform_pwm_backlight_data pwm_bl_data = {
-	.enable_gpio		= GPIO_PIN_PA(28),
-	.max_brightness		= 255,
-	.dft_brightness		= 255,
-	.lth_brightness		= 50,
-};
-
-static struct platform_device pwm_bl_device = {
-	.name = "pwm-backlight",
-	.dev = {
-		.platform_data = &pwm_bl_data,
-	},
-};
-
-static void __init favr32_setup_atmel_pwm_bl(void)
-{
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-	regulator_register_always_on(0, "fixed", fixed_power_consumers,
-				    ARRAY_SIZE(fixed_power_consumers), 3300000);
-	platform_device_register(&pwm_bl_device);
-	at32_select_gpio(pwm_bl_data.enable_gpio, 0);
-}
-
-void __init setup_board(void)
-{
-	at32_map_usart(3, 0, 0);	/* USART 3 => /dev/ttyS0 */
-	at32_setup_serial_console(0);
-}
-
-static int __init set_abdac_rate(struct platform_device *pdev)
-{
-	int retval;
-	struct clk *osc1;
-	struct clk *pll1;
-	struct clk *abdac;
-
-	if (pdev == NULL)
-		return -ENXIO;
-
-	osc1 = clk_get(NULL, "osc1");
-	if (IS_ERR(osc1)) {
-		retval = PTR_ERR(osc1);
-		goto out;
-	}
-
-	pll1 = clk_get(NULL, "pll1");
-	if (IS_ERR(pll1)) {
-		retval = PTR_ERR(pll1);
-		goto out_osc1;
-	}
-
-	abdac = clk_get(&pdev->dev, "sample_clk");
-	if (IS_ERR(abdac)) {
-		retval = PTR_ERR(abdac);
-		goto out_pll1;
-	}
-
-	retval = clk_set_parent(pll1, osc1);
-	if (retval != 0)
-		goto out_abdac;
-
-	/*
-	 * Rate is 32000 to 50000 and ABDAC oversamples 256x. Multiply, in
-	 * power of 2, to a value above 80 MHz. Power of 2 so it is possible
-	 * for the generic clock to divide it down again and 80 MHz is the
-	 * lowest frequency for the PLL.
-	 */
-	retval = clk_round_rate(pll1,
-			CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16);
-	if (retval <= 0) {
-		retval = -EINVAL;
-		goto out_abdac;
-	}
-
-	retval = clk_set_rate(pll1, retval);
-	if (retval != 0)
-		goto out_abdac;
-
-	retval = clk_set_parent(abdac, pll1);
-	if (retval != 0)
-		goto out_abdac;
-
-out_abdac:
-	clk_put(abdac);
-out_pll1:
-	clk_put(pll1);
-out_osc1:
-	clk_put(osc1);
-out:
-	return retval;
-}
-
-static int __init favr32_init(void)
-{
-	/*
-	 * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific
-	 * pins so that nobody messes with them.
-	 */
-	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
-
-	at32_select_gpio(GPIO_PIN_PB(3), 0);	/* IRQ from ADS7843 */
-
-	at32_add_device_usart(0);
-
-	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-
-	spi1_board_info[0].irq = gpio_to_irq(GPIO_PIN_PB(3));
-
-	set_abdac_rate(at32_add_device_abdac(0, &abdac0_data));
-
-	at32_add_device_pwm(1 << PWM_BL_CH);
-	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-	at32_add_device_mci(0, &mci0_data);
-	at32_add_device_usba(0, NULL);
-	at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0);
-
-	favr32_setup_leds();
-
-	favr32_setup_atmel_pwm_bl();
-
-	return 0;
-}
-postcore_initcall(favr32_init);
diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig
deleted file mode 100644
index 5c13d785cc70..000000000000
--- a/arch/avr32/boards/hammerhead/Kconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-# Hammerhead customization
-
-if BOARD_HAMMERHEAD
-
-config BOARD_HAMMERHEAD_USB
-	bool "Philips ISP116x-hcd USB support"
-	help
-	  This enables USB support for Hammerheads internal ISP116x
-	  controller from Philips.
-
-	  Choose 'Y' here if you want to have your board USB driven.
-
-config BOARD_HAMMERHEAD_LCD
-	bool "Atmel AT91/AT32 LCD support"
-	help
-	  This enables LCD support for the Hammerhead board. You may
-	  also add support for framebuffer devices (AT91/AT32 LCD Controller)
-	  and framebuffer console support to get the most out of your LCD.
-
-	  Choose 'Y' here if you have ordered a Corona daugther board and
-	  want to have support for your Hantronix HDA-351T-LV LCD.
-
-config BOARD_HAMMERHEAD_SND
-	bool "Atmel AC97 Sound support"
-	help
-	  This enables Sound support for the Hammerhead board. You may
-	  also go through the ALSA settings to get it working.
-
-	  Choose 'Y' here if you have ordered a Corona daugther board and
-	  want to make your board funky.
-
-config BOARD_HAMMERHEAD_FPGA
-	bool "Hammerhead FPGA Support"
-	default y
-	help
-	  This adds support for the Cyclone III FPGA from Altera
-	  found on Miromico's Hammerhead board.
-
-	  Choose 'Y' here if you want to have FPGA support enabled.
-	  You will have to choose the "Hammerhead FPGA Device Support" in
-	  Device Drivers->Misc to be able to use FPGA functionality.
-
-endif	# BOARD_ATNGW100
diff --git a/arch/avr32/boards/hammerhead/Makefile b/arch/avr32/boards/hammerhead/Makefile
deleted file mode 100644
index c740aa116755..000000000000
--- a/arch/avr32/boards/hammerhead/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y				+= setup.o flash.o
diff --git a/arch/avr32/boards/hammerhead/flash.c b/arch/avr32/boards/hammerhead/flash.c
deleted file mode 100644
index e86280ccd8fa..000000000000
--- a/arch/avr32/boards/hammerhead/flash.c
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * Hammerhead board-specific flash initialization
- *
- * Copyright (C) 2008 Miromico AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/usb/isp116x.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-
-#include <mach/portmux.h>
-#include <mach/at32ap700x.h>
-#include <mach/smc.h>
-
-#include "../../mach-at32ap/clock.h"
-#include "flash.h"
-
-
-#define HAMMERHEAD_USB_PERIPH_GCLK0	0x40000000
-#define HAMMERHEAD_USB_PERIPH_CS2	0x02000000
-#define HAMMERHEAD_USB_PERIPH_EXTINT0	0x02000000
-
-#define HAMMERHEAD_FPGA_PERIPH_MOSI	0x00000002
-#define HAMMERHEAD_FPGA_PERIPH_SCK	0x00000020
-#define HAMMERHEAD_FPGA_PERIPH_EXTINT3	0x10000000
-
-static struct smc_timing flash_timing __initdata = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 40,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 10,
-
-	.ncs_read_pulse		= 80,
-	.nrd_pulse		= 40,
-	.ncs_write_pulse	= 65,
-	.nwe_pulse		= 55,
-
-	.read_cycle		= 120,
-	.write_cycle		= 120,
-};
-
-static struct smc_config flash_config __initdata = {
-	.bus_width		= 2,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.byte_write		= 1,
-};
-
-static struct mtd_partition flash_parts[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0x00000000,
-		.size		= 0x00020000,           /* 128 KiB */
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "root",
-		.offset		= 0x00020000,
-		.size		= 0x007d0000,
-	},
-	{
-		.name		= "env",
-		.offset		= 0x007f0000,
-		.size		= 0x00010000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data flash_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(flash_parts),
-	.parts		= flash_parts,
-};
-
-static struct resource flash_resource = {
-	.start		= 0x00000000,
-	.end		= 0x007fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &flash_resource,
-	.num_resources	= 1,
-	.dev		= { .platform_data = &flash_data, },
-};
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_USB
-
-static struct smc_timing isp1160_timing __initdata = {
-	.ncs_read_setup		= 75,
-	.nrd_setup		= 75,
-	.ncs_write_setup	= 75,
-	.nwe_setup		= 75,
-
-
-	/* We use conservative timing settings, as the minimal settings aren't
-	   stable. There may be room for tweaking. */
-	.ncs_read_pulse		= 75,  /* min. 33ns */
-	.nrd_pulse		= 75,  /* min. 33ns */
-	.ncs_write_pulse	= 75,  /* min. 26ns */
-	.nwe_pulse		= 75,  /* min. 26ns */
-
-	.read_cycle		= 225, /* min. 143ns */
-	.write_cycle		= 225, /* min. 136ns */
-};
-
-static struct smc_config isp1160_config __initdata = {
-	.bus_width		= 2,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.byte_write		= 0,
-};
-
-/*
- * The platform delay function is only used to enforce the strange
- * read to write delay. This can not be configured in the SMC. All other
- * timings are controlled by the SMC (see timings obove)
- * So in isp116x-hcd.c we should comment out USE_PLATFORM_DELAY
- */
-void isp116x_delay(struct device *dev, int delay)
-{
-	if (delay > 150)
-		ndelay(delay - 150);
-}
-
-static struct  isp116x_platform_data isp1160_data = {
-	.sel15Kres		= 1,	/* use internal downstream resistors */
-	.oc_enable		= 0,	/* external overcurrent detection */
-	.int_edge_triggered	= 0,	/* interrupt is level triggered */
-	.int_act_high		= 0,	/* interrupt is active low */
-	.delay = isp116x_delay,		/* platform delay function */
-};
-
-static struct resource isp1160_resource[] = {
-	{
-		.start		= 0x08000000,
-		.end		= 0x08000001,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 0x08000002,
-		.end		= 0x08000003,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 64,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device isp1160_device = {
-	.name		= "isp116x-hcd",
-	.id		= 0,
-	.resource	= isp1160_resource,
-	.num_resources	= 3,
-	.dev		= {
-		.platform_data = &isp1160_data,
-	},
-};
-#endif
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_USB
-static int __init hammerhead_usbh_init(void)
-{
-	struct clk *gclk;
-	struct clk *osc;
-
-	int ret;
-
-	/* setup smc for usbh */
-	smc_set_timing(&isp1160_config, &isp1160_timing);
-	ret = smc_set_configuration(2, &isp1160_config);
-
-	if (ret < 0) {
-		printk(KERN_ERR
-		       "hammerhead: failed to set ISP1160 USBH timing\n");
-		return ret;
-	}
-
-	/* setup gclk0 to run from osc1 */
-	gclk = clk_get(NULL, "gclk0");
-	if (IS_ERR(gclk)) {
-		ret = PTR_ERR(gclk);
-		goto err_gclk;
-	}
-
-	osc = clk_get(NULL, "osc1");
-	if (IS_ERR(osc)) {
-		ret = PTR_ERR(osc);
-		goto err_osc;
-	}
-
-	ret = clk_set_parent(gclk, osc);
-	if (ret < 0) {
-		pr_debug("hammerhead: failed to set osc1 for USBH clock\n");
-		goto err_set_clk;
-	}
-
-	/* set clock to 6MHz */
-	clk_set_rate(gclk, 6000000);
-
-	/* and enable */
-	clk_enable(gclk);
-
-	/* select GCLK0 peripheral function */
-	at32_select_periph(GPIO_PIOA_BASE, HAMMERHEAD_USB_PERIPH_GCLK0,
-			   GPIO_PERIPH_A, 0);
-
-	/* enable CS2 peripheral function */
-	at32_select_periph(GPIO_PIOE_BASE, HAMMERHEAD_USB_PERIPH_CS2,
-			   GPIO_PERIPH_A, 0);
-
-	/* H_WAKEUP must be driven low */
-	at32_select_gpio(GPIO_PIN_PA(8), AT32_GPIOF_OUTPUT);
-
-	/* Select EXTINT0 for PB25 */
-	at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_USB_PERIPH_EXTINT0,
-			   GPIO_PERIPH_A, 0);
-
-	/* register usbh device driver */
-	platform_device_register(&isp1160_device);
-
- err_set_clk:
-	clk_put(osc);
- err_osc:
-	clk_put(gclk);
- err_gclk:
-	return ret;
-}
-#endif
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA
-static struct smc_timing fpga_timing __initdata = {
-	.ncs_read_setup		= 16,
-	.nrd_setup		= 32,
-	.ncs_read_pulse		= 48,
-	.nrd_pulse		= 32,
-	.read_cycle		= 64,
-
-	.ncs_write_setup	= 16,
-	.nwe_setup		= 16,
-	.ncs_write_pulse	= 32,
-	.nwe_pulse		= 32,
-	.write_cycle		= 64,
-};
-
-static struct smc_config fpga_config __initdata = {
-	.bus_width		= 4,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.byte_write		= 0,
-};
-
-static struct resource hh_fpga0_resource[] = {
-	{
-		.start		= 0xffe00400,
-		.end		= 0xffe00400 + 0x3ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 4,
-		.end		= 4,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 0x0c000000,
-		.end		= 0x0c000100,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 67,
-		.end		= 67,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 hh_fpga0_dma_mask = DMA_BIT_MASK(32);
-static struct platform_device hh_fpga0_device = {
-	.name		= "hh_fpga",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &hh_fpga0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= hh_fpga0_resource,
-	.num_resources	= ARRAY_SIZE(hh_fpga0_resource),
-};
-
-static struct clk hh_fpga0_spi_clk = {
-	.name		= "spi_clk",
-	.dev		= &hh_fpga0_device.dev,
-	.mode		= pba_clk_mode,
-	.get_rate	= pba_clk_get_rate,
-	.index		= 1,
-};
-
-struct platform_device *__init at32_add_device_hh_fpga(void)
-{
-	/* Select peripheral functionallity for SPI SCK and MOSI */
-	at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_SCK,
-			   GPIO_PERIPH_B, 0);
-	at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_MOSI,
-			   GPIO_PERIPH_B, 0);
-
-	/* reserve all other needed gpio
-	 * We have on board pull ups, so there is no need
-	 * to enable gpio pull ups */
-	/* INIT_DONE (input) */
-	at32_select_gpio(GPIO_PIN_PB(0), 0);
-
-	/* nSTATUS (input) */
-	at32_select_gpio(GPIO_PIN_PB(2), 0);
-
-	/* nCONFIG (output, low) */
-	at32_select_gpio(GPIO_PIN_PB(3), AT32_GPIOF_OUTPUT);
-
-	/* CONF_DONE (input) */
-	at32_select_gpio(GPIO_PIN_PB(4), 0);
-
-	/* Select EXTINT3 for PB28 (Interrupt from FPGA) */
-	at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_EXTINT3,
-			   GPIO_PERIPH_A, 0);
-
-	/* Get our parent clock */
-	hh_fpga0_spi_clk.parent = clk_get(NULL, "pba");
-	clk_put(hh_fpga0_spi_clk.parent);
-
-	/* Register clock in at32 clock tree */
-	at32_clk_register(&hh_fpga0_spi_clk);
-
-	platform_device_register(&hh_fpga0_device);
-	return &hh_fpga0_device;
-}
-#endif
-
-/* This needs to be called after the SMC has been initialized */
-static int __init hammerhead_flash_init(void)
-{
-	int ret;
-
-	smc_set_timing(&flash_config, &flash_timing);
-	ret = smc_set_configuration(0, &flash_config);
-
-	if (ret < 0) {
-		printk(KERN_ERR "hammerhead: failed to set NOR flash timing\n");
-		return ret;
-	}
-
-	platform_device_register(&flash_device);
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_USB
-	hammerhead_usbh_init();
-#endif
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA
-	/* Setup SMC for FPGA interface */
-	smc_set_timing(&fpga_config, &fpga_timing);
-	ret = smc_set_configuration(3, &fpga_config);
-#endif
-
-
-	if (ret < 0) {
-		printk(KERN_ERR "hammerhead: failed to set FPGA timing\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-device_initcall(hammerhead_flash_init);
diff --git a/arch/avr32/boards/hammerhead/flash.h b/arch/avr32/boards/hammerhead/flash.h
deleted file mode 100644
index ea70c626587b..000000000000
--- a/arch/avr32/boards/hammerhead/flash.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __BOARDS_HAMMERHEAD_FLASH_H
-#define __BOARDS_HAMMERHEAD_FLASH_H
-
-struct platform_device *at32_add_device_hh_fpga(void);
-
-#endif /* __BOARDS_HAMMERHEAD_FLASH_H */
diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c
deleted file mode 100644
index dc0e317f2ecd..000000000000
--- a/arch/avr32/boards/hammerhead/setup.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Board-specific setup code for the Miromico Hammerhead board
- *
- * Copyright (C) 2008 Miromico AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/atmel-mci.h>
-#include <linux/clk.h>
-#include <linux/fb.h>
-#include <linux/etherdevice.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/spi/spi.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <linux/io.h>
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-#include <sound/atmel-ac97c.h>
-
-#include "../../mach-at32ap/clock.h"
-#include "flash.h"
-
-/* Oscillator frequencies. These are board-specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0] = 32768,	/* 32.768 kHz on RTC osc */
-	[1] = 25000000, /* 25MHz on osc0 */
-	[2] = 12000000,	/* 12 MHz on osc1 */
-};
-
-/* Initialized by bootloader-specific startup code. */
-struct tag *bootloader_tags __initdata;
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_LCD
-static struct fb_videomode __initdata hda350tlv_modes[] = {
-	{
-		.name		= "320x240 @ 75",
-		.refresh	= 75,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6891),
-
-		.left_margin	= 48,
-		.right_margin	= 18,
-		.upper_margin	= 18,
-		.lower_margin	= 4,
-		.hsync_len	= 20,
-		.vsync_len	= 2,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata hammerhead_hda350t_monspecs = {
-	.manufacturer		= "HAN",
-	.monitor		= "HDA350T-LV",
-	.modedb			= hda350tlv_modes,
-	.modedb_len		= ARRAY_SIZE(hda350tlv_modes),
-	.hfmin			= 14900,
-	.hfmax			= 22350,
-	.vfmin			= 60,
-	.vfmax			= 90,
-	.dclkmax		= 10000000,
-};
-
-struct atmel_lcdfb_pdata __initdata hammerhead_lcdc_data = {
-	.default_bpp		= 24,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_INVCLK
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.default_monspecs	= &hammerhead_hda350t_monspecs,
-	.guard_time		= 2,
-};
-#endif
-
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
-		.wp_pin		= -ENODEV,
-	},
-};
-
-struct eth_addr {
-	u8 addr[6];
-};
-
-static struct eth_addr __initdata hw_addr[1];
-static struct macb_platform_data __initdata eth_data[1];
-
-/*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
- * ethernet address. But we need to keep it around for a while until
- * we can be reasonably sure the boot loader does this.
- *
- * The phy_id is ignored as the driver will probe for it.
- */
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-	int i = tag->u.ethernet.mac_index;
-
-	if (i < ARRAY_SIZE(hw_addr))
-		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-		       sizeof(hw_addr[i].addr));
-
-	return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
-static void __init set_hw_addr(struct platform_device *pdev)
-{
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	const u8 *addr;
-	void __iomem *regs;
-	struct clk *pclk;
-
-	if (!res)
-		return;
-
-	if (pdev->id >= ARRAY_SIZE(hw_addr))
-		return;
-
-	addr = hw_addr[pdev->id].addr;
-
-	if (!is_valid_ether_addr(addr))
-		return;
-
-	/*
-	 * Since this is board-specific code, we'll cheat and use the
-	 * physical address directly as we happen to know that it's
-	 * the same as the virtual address.
-	 */
-	regs = (void __iomem __force *)res->start;
-	pclk = clk_get(&pdev->dev, "pclk");
-
-	if (IS_ERR(pclk))
-		return;
-
-	clk_enable(pclk);
-
-	__raw_writel((addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) |
-		     addr[0], regs + 0x98);
-	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-
-	clk_disable(pclk);
-	clk_put(pclk);
-}
-
-void __init setup_board(void)
-{
-	at32_map_usart(1, 0, 0);	/* USART 1: /dev/ttyS0, DB9 */
-	at32_setup_serial_console(0);
-}
-
-static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin		= GPIO_PIN_PA(6),
-	.scl_pin		= GPIO_PIN_PA(7),
-	.sda_is_open_drain	= 1,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,	/* close to 100 kHz */
-};
-
-static struct platform_device i2c_gpio_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= { .platform_data = &i2c_gpio_data, },
-};
-
-static struct i2c_board_info __initdata i2c_info[] = {};
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_SND
-static struct ac97c_platform_data ac97c_data = {
-	.reset_pin = GPIO_PIN_PA(16),
-};
-#endif
-
-static int __init hammerhead_init(void)
-{
-	/*
-	 * Hammerhead uses 32-bit SDRAM interface. Reserve the
-	 * SDRAM-specific pins so that nobody messes with them.
-	 */
-	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
-
-	at32_add_device_usart(0);
-
-	/* Reserve PB29 (GCLK3). This pin is used as clock source
-	 * for ETH PHY (25MHz). GCLK3 setup is done by U-Boot.
-	 */
-	at32_reserve_pin(GPIO_PIOB_BASE, (1<<29));
-
-	/*
-	 * Hammerhead uses only one ethernet port, so we don't set
-	 * address of second port
-	 */
-	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA
-	at32_add_device_hh_fpga();
-#endif
-	at32_add_device_mci(0, &mci0_data);
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_USB
-	at32_add_device_usba(0, NULL);
-#endif
-#ifdef CONFIG_BOARD_HAMMERHEAD_LCD
-	at32_add_device_lcdc(0, &hammerhead_lcdc_data, fbmem_start,
-			     fbmem_size, ATMEL_LCDC_PRI_24BIT);
-#endif
-
-	at32_select_gpio(i2c_gpio_data.sda_pin,
-			 AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT |
-			 AT32_GPIOF_HIGH);
-	at32_select_gpio(i2c_gpio_data.scl_pin,
-			 AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT |
-			 AT32_GPIOF_HIGH);
-	platform_device_register(&i2c_gpio_device);
-	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
-
-#ifdef CONFIG_BOARD_HAMMERHEAD_SND
-	at32_add_device_ac97c(0, &ac97c_data, AC97C_BOTH);
-#endif
-
-	/* Select the Touchscreen interrupt pin mode */
-	at32_select_periph(GPIO_PIOB_BASE, 0x08000000, GPIO_PERIPH_A, 0);
-
-	return 0;
-}
-
-postcore_initcall(hammerhead_init);
diff --git a/arch/avr32/boards/merisc/Kconfig b/arch/avr32/boards/merisc/Kconfig
deleted file mode 100644
index 7e043275d5a9..000000000000
--- a/arch/avr32/boards/merisc/Kconfig
+++ /dev/null
@@ -1,5 +0,0 @@
-# Merisc customization
-
-if BOARD_MERISC
-
-endif	# BOARD_MERISC
diff --git a/arch/avr32/boards/merisc/Makefile b/arch/avr32/boards/merisc/Makefile
deleted file mode 100644
index d24c78729bd1..000000000000
--- a/arch/avr32/boards/merisc/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y					+= setup.o flash.o display.o merisc_sysfs.o
diff --git a/arch/avr32/boards/merisc/display.c b/arch/avr32/boards/merisc/display.c
deleted file mode 100644
index e7683ee7ed40..000000000000
--- a/arch/avr32/boards/merisc/display.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Display setup code for the Merisc board
- *
- * Copyright (C) 2008 Martinsson Elektronik AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-#include <asm/setup.h>
-#include <mach/board.h>
-#include "merisc.h"
-
-static struct fb_videomode merisc_fb_videomode[] = {
-	{
-		.refresh	= 44,
-		.xres		= 640,
-		.yres		= 480,
-		.left_margin	= 96,
-		.right_margin	= 96,
-		.upper_margin	= 34,
-		.lower_margin	= 8,
-		.hsync_len	= 64,
-		.vsync_len	= 64,
-		.name		= "640x480 @ 44",
-		.pixclock	= KHZ2PICOS(25180),
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs merisc_fb_monspecs = {
-	.manufacturer	= "Kyo",
-	.monitor	= "TCG075VG2AD",
-	.modedb		= merisc_fb_videomode,
-	.modedb_len	= ARRAY_SIZE(merisc_fb_videomode),
-	.hfmin		= 30000,
-	.hfmax		= 33333,
-	.vfmin		= 60,
-	.vfmax		= 90,
-	.dclkmax	= 30000000,
-};
-
-struct atmel_lcdfb_pdata merisc_lcdc_data = {
-	.default_bpp		= 24,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.default_monspecs	= &merisc_fb_monspecs,
-	.guard_time		= 2,
-};
-
-static int __init merisc_display_init(void)
-{
-	at32_add_device_lcdc(0, &merisc_lcdc_data, fbmem_start,
-			     fbmem_size, 0);
-
-	return 0;
-}
-device_initcall(merisc_display_init);
diff --git a/arch/avr32/boards/merisc/flash.c b/arch/avr32/boards/merisc/flash.c
deleted file mode 100644
index 8e856fd6f013..000000000000
--- a/arch/avr32/boards/merisc/flash.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Merisc board-specific flash initialization
- *
- * Copyright (C) 2008 Martinsson Elektronik AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <mach/smc.h>
-
-/* Will be translated to units of 14.3 ns, rounded up */
-static struct smc_timing flash_timing __initdata = {
-	.ncs_read_setup		= 1 * 14,
-	.nrd_setup		= 5 * 14,
-	.ncs_write_setup	= 1 * 14,
-	.nwe_setup		= 2 * 14,
-
-	.ncs_read_pulse		= 12 * 14,
-	.nrd_pulse		= 7 * 14,
-	.ncs_write_pulse	= 8 * 14,
-	.nwe_pulse		= 4 * 14,
-
-	.read_cycle		= 14 * 14,
-	.write_cycle		= 10 * 14,
-};
-
-static struct smc_config flash_config __initdata = {
-	.bus_width	= 2,
-	.nrd_controlled	= 1,
-	.nwe_controlled	= 1,
-	.byte_write	= 1,
-	.tdf_cycles	= 3,
-};
-
-static struct mtd_partition flash_0_parts[] = {
-	{
-		.name		= "boot",
-		.offset		= 0x00000000,
-		.size		= 0x00060000,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "kernel",
-		.offset		= 0x00060000,
-		.size		= 0x00200000,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "root",
-		.offset		= 0x00260000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct mtd_partition flash_1_parts[] = {
-	{
-		.name		= "2ndflash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct physmap_flash_data flash_data[] = {
-	{
-		.width		= 2,
-		.nr_parts	= ARRAY_SIZE(flash_0_parts),
-		.parts		= flash_0_parts,
-	},
-	{
-		.width		= 2,
-		.nr_parts	= ARRAY_SIZE(flash_1_parts),
-		.parts		= flash_1_parts,
-	}
-};
-
-static struct resource flash_resource[] = {
-	{
-		.start		= 0x00000000,
-		.end		= 0x03ffffff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 0x04000000,
-		.end		= 0x07ffffff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device flash_device[] = {
-	{
-		.name		= "physmap-flash",
-		.id		= 0,
-		.resource	= &flash_resource[0],
-		.num_resources	= 1,
-		.dev		= {
-			.platform_data	= &flash_data[0],
-		},
-	},
-	{
-		.name		= "physmap-flash",
-		.id		= 1,
-		.resource	= &flash_resource[1],
-		.num_resources	= 1,
-		.dev		= {
-			.platform_data	= &flash_data[1],
-		},
-	},
-};
-
-static int __init merisc_flash_init(void)
-{
-	int ret;
-	smc_set_timing(&flash_config, &flash_timing);
-
-	ret = smc_set_configuration(0, &flash_config);
-	if (ret < 0) {
-		printk(KERN_ERR "Merisc: failed to set NOR flash timing #0\n");
-		return ret;
-	}
-
-	ret = smc_set_configuration(4, &flash_config);
-	if (ret < 0) {
-		printk(KERN_ERR "Merisc: failed to set NOR flash timing #1\n");
-		return ret;
-	}
-
-	platform_device_register(&flash_device[0]);
-	platform_device_register(&flash_device[1]);
-	return 0;
-}
-device_initcall(merisc_flash_init);
diff --git a/arch/avr32/boards/merisc/merisc.h b/arch/avr32/boards/merisc/merisc.h
deleted file mode 100644
index 50ffb2f3fcbf..000000000000
--- a/arch/avr32/boards/merisc/merisc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Merisc exports
- *
- * Copyright (C) 2008 Martinsson Elektronik AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_AVR32_BOARDS_MERISC_MERISC_H
-#define __ARCH_AVR32_BOARDS_MERISC_MERISC_H
-
-const char *merisc_revision(void);
-const char *merisc_model(void);
-
-extern struct class merisc_class;
-
-#endif /* __ARCH_AVR32_BOARDS_MERISC_MERISC_H */
diff --git a/arch/avr32/boards/merisc/merisc_sysfs.c b/arch/avr32/boards/merisc/merisc_sysfs.c
deleted file mode 100644
index 5a252318f4bd..000000000000
--- a/arch/avr32/boards/merisc/merisc_sysfs.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Merisc sysfs exports
- *
- * Copyright (C) 2008 Martinsson Elektronik AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/timer.h>
-#include <linux/err.h>
-#include <linux/ctype.h>
-#include "merisc.h"
-
-static ssize_t merisc_model_show(struct class *class, char *buf)
-{
-	ssize_t ret = 0;
-
-	sprintf(buf, "%s\n", merisc_model());
-	ret = strlen(buf) + 1;
-
-	return ret;
-}
-
-static ssize_t merisc_revision_show(struct class *class, char *buf)
-{
-	ssize_t ret = 0;
-
-	sprintf(buf, "%s\n", merisc_revision());
-	ret = strlen(buf) + 1;
-
-	return ret;
-}
-
-static struct class_attribute merisc_class_attrs[] = {
-	__ATTR(model, S_IRUGO, merisc_model_show, NULL),
-	__ATTR(revision, S_IRUGO, merisc_revision_show, NULL),
-	__ATTR_NULL,
-};
-
-struct class merisc_class = {
-	.name =		"merisc",
-	.owner =	THIS_MODULE,
-	.class_attrs =	merisc_class_attrs,
-};
-
-static int __init merisc_sysfs_init(void)
-{
-	int status;
-
-	status = class_register(&merisc_class);
-	if (status < 0)
-		return status;
-
-	return 0;
-}
-
-postcore_initcall(merisc_sysfs_init);
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
deleted file mode 100644
index 718a6d7eb808..000000000000
--- a/arch/avr32/boards/merisc/setup.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * Board-specific setup code for the Merisc
- *
- * Copyright (C) 2008 Martinsson Elektronik AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/etherdevice.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/irq.h>
-#include <linux/fb.h>
-#include <linux/atmel-mci.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-
-#include <asm/io.h>
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-#include "merisc.h"
-
-/* Holds the autodetected board model and revision */
-static int merisc_board_id;
-
-/* Initialized by bootloader-specific startup code. */
-struct tag *bootloader_tags __initdata;
-
-/* Oscillator frequencies. These are board specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0]	= 32768,	/* 32.768 kHz on RTC osc */
-	[1]	= 20000000,	/* 20 MHz on osc0 */
-	[2]	= 12000000,	/* 12 MHz on osc1 */
-};
-
-struct eth_addr {
-	u8 addr[6];
-};
-
-static struct eth_addr __initdata hw_addr[2];
-static struct macb_platform_data __initdata eth_data[2];
-
-static int ads7846_get_pendown_state_PB26(void)
-{
-	return !gpio_get_value(GPIO_PIN_PB(26));
-}
-
-static int ads7846_get_pendown_state_PB28(void)
-{
-	return !gpio_get_value(GPIO_PIN_PB(28));
-}
-
-static struct ads7846_platform_data __initdata ads7846_data = {
-	.model				= 7846,
-	.vref_delay_usecs		= 100,
-	.vref_mv			= 0,
-	.keep_vref_on			= 0,
-	.settle_delay_usecs		= 150,
-	.penirq_recheck_delay_usecs	= 1,
-	.x_plate_ohms			= 800,
-	.debounce_rep			= 4,
-	.debounce_max			= 10,
-	.debounce_tol			= 50,
-	.get_pendown_state		= ads7846_get_pendown_state_PB26,
-	.filter_init			= NULL,
-	.filter				= NULL,
-	.filter_cleanup			= NULL,
-};
-
-static struct spi_board_info __initdata spi0_board_info[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 3250000,
-		.chip_select	= 0,
-		.bus_num	= 0,
-		.platform_data	= &ads7846_data,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width		= 4,
-		.detect_pin		= GPIO_PIN_PE(19),
-		.wp_pin			= GPIO_PIN_PE(20),
-		.detect_is_active_high	= true,
-	},
-};
-
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-	int i;
-
-	i = tag->u.ethernet.mac_index;
-	if (i < ARRAY_SIZE(hw_addr)) {
-		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-		       sizeof(hw_addr[i].addr));
-	}
-
-	return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
-static void __init set_hw_addr(struct platform_device *pdev)
-{
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	const u8 *addr;
-	void __iomem *regs;
-	struct clk *pclk;
-
-	if (!res)
-		return;
-
-	if (pdev->id >= ARRAY_SIZE(hw_addr))
-		return;
-
-	addr = hw_addr[pdev->id].addr;
-	if (!is_valid_ether_addr(addr))
-		return;
-
-	regs = (void __iomem __force *)res->start;
-	pclk = clk_get(&pdev->dev, "pclk");
-	if (IS_ERR(pclk))
-		return;
-
-	clk_enable(pclk);
-	__raw_writel((addr[3] << 24) | (addr[2] << 16)
-		     | (addr[1] << 8) | addr[0], regs + 0x98);
-	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-	clk_disable(pclk);
-	clk_put(pclk);
-}
-
-static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin		= GPIO_PIN_PA(6),
-	.scl_pin		= GPIO_PIN_PA(7),
-	.sda_is_open_drain	= 1,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,
-};
-
-static struct platform_device i2c_gpio_device = {
-	.name	= "i2c-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &i2c_gpio_data,
-	},
-};
-
-static struct i2c_board_info __initdata i2c_info[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51)
-	},
-};
-
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-static struct pwm_lookup pwm_lookup[] = {
-	PWM_LOOKUP("at91sam9rl-pwm", 0, "leds_pwm", "backlight",
-		   5000, PWM_POLARITY_NORMAL),
-};
-
-static struct led_pwm pwm_leds[] = {
-	{
-		.name	= "backlight",
-		.max_brightness = 255,
-	},
-};
-
-static struct led_pwm_platform_data pwm_data = {
-	.num_leds       = ARRAY_SIZE(pwm_leds),
-	.leds           = pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
-	.name   = "leds_pwm",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &pwm_data,
-	},
-};
-#endif
-
-const char *merisc_model(void)
-{
-	switch (merisc_board_id) {
-	case 0:
-	case 1:
-		return "500-01";
-	case 2:
-		return "BT";
-	default:
-		return "Unknown";
-	}
-}
-
-const char *merisc_revision(void)
-{
-	switch (merisc_board_id) {
-	case 0:
-		return "B";
-	case 1:
-		return "D";
-	case 2:
-		return "A";
-	default:
-		return "Unknown";
-	}
-}
-
-static void detect_merisc_board_id(void)
-{
-	/* Board ID pins MUST be set as input or the board may be damaged */
-	at32_select_gpio(GPIO_PIN_PA(24), AT32_GPIOF_PULLUP);
-	at32_select_gpio(GPIO_PIN_PA(25), AT32_GPIOF_PULLUP);
-	at32_select_gpio(GPIO_PIN_PA(26), AT32_GPIOF_PULLUP);
-	at32_select_gpio(GPIO_PIN_PA(27), AT32_GPIOF_PULLUP);
-
-	merisc_board_id = !gpio_get_value(GPIO_PIN_PA(24)) +
-		!gpio_get_value(GPIO_PIN_PA(25)) * 2 +
-		!gpio_get_value(GPIO_PIN_PA(26)) * 4 +
-		!gpio_get_value(GPIO_PIN_PA(27)) * 8;
-}
-
-void __init setup_board(void)
-{
-	at32_map_usart(0, 0, 0);
-	at32_map_usart(1, 1, 0);
-	at32_map_usart(3, 3, 0);
-	at32_setup_serial_console(1);
-}
-
-static int __init merisc_init(void)
-{
-	detect_merisc_board_id();
-
-	printk(KERN_NOTICE "BOARD: Merisc %s revision %s\n", merisc_model(),
-	       merisc_revision());
-
-	/* Reserve pins for SDRAM */
-	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26));
-
-	if (merisc_board_id >= 1)
-		at32_map_usart(2, 2, 0);
-
-	at32_add_device_usart(0);
-	at32_add_device_usart(1);
-	if (merisc_board_id >= 1)
-		at32_add_device_usart(2);
-	at32_add_device_usart(3);
-	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-
-	/* ADS7846 PENIRQ */
-	if (merisc_board_id == 0) {
-		ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB26;
-		at32_select_periph(GPIO_PIOB_BASE, 1 << 26,
-				   GPIO_PERIPH_A, AT32_GPIOF_PULLUP);
-		spi0_board_info[0].irq = AT32_EXTINT(1);
-	} else {
-		ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB28;
-		at32_select_periph(GPIO_PIOB_BASE, 1 << 28, GPIO_PERIPH_A,
-				   AT32_GPIOF_PULLUP);
-		spi0_board_info[0].irq = AT32_EXTINT(3);
-	}
-
-	/* ADS7846 busy pin */
-	at32_select_gpio(GPIO_PIN_PA(4), AT32_GPIOF_PULLUP);
-
-	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-
-	at32_add_device_mci(0, &mci0_data);
-
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-	at32_add_device_pwm((1 << 0) | (1 << 2));
-	platform_device_register(&leds_pwm);
-#else
-	at32_add_device_pwm((1 << 2));
-#endif
-
-	at32_select_gpio(i2c_gpio_data.sda_pin,
-		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-	at32_select_gpio(i2c_gpio_data.scl_pin,
-		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-	platform_device_register(&i2c_gpio_device);
-
-	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
-
-	return 0;
-}
-postcore_initcall(merisc_init);
diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile
deleted file mode 100644
index c740aa116755..000000000000
--- a/arch/avr32/boards/mimc200/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y				+= setup.o flash.o
diff --git a/arch/avr32/boards/mimc200/flash.c b/arch/avr32/boards/mimc200/flash.c
deleted file mode 100644
index d83d650fc13f..000000000000
--- a/arch/avr32/boards/mimc200/flash.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * MIMC200 board-specific flash initialization
- *
- * Copyright (C) 2008 Mercury IMC Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/smc.h>
-
-static struct smc_timing flash_timing __initdata = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 15,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 0,
-
-	.ncs_read_pulse		= 115,
-	.nrd_pulse		= 110,
-	.ncs_write_pulse	= 60,
-	.nwe_pulse		= 60,
-
-	.read_cycle		= 115,
-	.write_cycle		= 100,
-};
-
-static struct smc_config flash_config __initdata = {
-	.bus_width		= 2,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.byte_write		= 1,
-};
-
-/* system flash definition */
-
-static struct mtd_partition flash_parts_system[] = {
-	{
-		.name           = "u-boot",
-		.offset         = 0x00000000,
-		.size           = 0x00020000,           /* 128 KiB */
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "root",
-		.offset         = 0x00020000,
-		.size           = 0x007c0000,
-	},
-	{
-		.name		= "splash",
-		.offset		= 0x007e0000,
-		.size		= 0x00010000,		/* 64KiB */
-	},
-	{
-		.name           = "env",
-		.offset         = 0x007f0000,
-		.size           = 0x00010000,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data flash_system = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(flash_parts_system),
-	.parts		= flash_parts_system,
-};
-
-static struct resource flash_resource_system = {
-	.start		= 0x00000000,
-	.end		= 0x007fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device_system = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &flash_resource_system,
-	.num_resources	= 1,
-	.dev		= {
-		.platform_data = &flash_system,
-	},
-};
-
-/* data flash definition */
-
-static struct mtd_partition flash_parts_data[] = {
-	{
-		.name		= "data",
-		.offset		= 0x00000000,
-		.size		= 0x00800000,
-	},
-};
-
-static struct physmap_flash_data flash_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(flash_parts_data),
-	.parts		= flash_parts_data,
-};
-
-static struct resource flash_resource_data = {
-	.start		= 0x08000000,
-	.end		= 0x087fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device_data = {
-	.name		= "physmap-flash",
-	.id		= 1,
-	.resource	= &flash_resource_data,
-	.num_resources	= 1,
-	.dev		= {
-		.platform_data = &flash_data,
-	},
-};
-
-/* This needs to be called after the SMC has been initialized */
-static int __init mimc200_flash_init(void)
-{
-	int ret;
-
-	smc_set_timing(&flash_config, &flash_timing);
-	ret = smc_set_configuration(0, &flash_config);
-	if (ret < 0) {
-		printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n");
-		return ret;
-	}
-	ret = smc_set_configuration(1, &flash_config);
-	if (ret < 0) {
-		printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n");
-		return ret;
-	}
-
-	platform_device_register(&flash_device_system);
-	platform_device_register(&flash_device_data);
-
-	return 0;
-}
-device_initcall(mimc200_flash_init);
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
deleted file mode 100644
index 1cb8e9cc5cfa..000000000000
--- a/arch/avr32/boards/mimc200/setup.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Board-specific setup code for the MIMC200
- *
- * Copyright (C) 2008 Mercury IMC Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern struct atmel_lcdfb_pdata mimc200_lcdc_data;
-
-#include <linux/clk.h>
-#include <linux/etherdevice.h>
-#include <linux/i2c-gpio.h>
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-
-#include <video/atmel_lcdc.h>
-#include <linux/fb.h>
-
-#include <linux/atmel-mci.h>
-#include <linux/io.h>
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-/* Oscillator frequencies. These are board-specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0] = 32768,	/* 32.768 kHz on RTC osc */
-	[1] = 10000000,	/* 10 MHz on osc0 */
-	[2] = 12000000,	/* 12 MHz on osc1 */
-};
-
-/* Initialized by bootloader-specific startup code. */
-struct tag *bootloader_tags __initdata;
-
-static struct fb_videomode __initdata pt0434827_modes[] = {
-	{
-		.name		= "480x272 @ 72",
-		.refresh	= 72,
-		.xres		= 480,		.yres		= 272,
-		.pixclock	= KHZ2PICOS(10000),
-
-		.left_margin	= 1,		.right_margin	= 1,
-		.upper_margin	= 12,		.lower_margin	= 1,
-		.hsync_len	= 42,		.vsync_len	= 1,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs __initdata mimc200_default_monspecs = {
-	.manufacturer		= "PT",
-	.monitor		= "PT0434827-A401",
-	.modedb			= pt0434827_modes,
-	.modedb_len		= ARRAY_SIZE(pt0434827_modes),
-	.hfmin			= 14820,
-	.hfmax			= 22230,
-	.vfmin			= 60,
-	.vfmax			= 85,
-	.dclkmax		= 25200000,
-};
-
-struct atmel_lcdfb_pdata __initdata mimc200_lcdc_data = {
-	.default_bpp		= 16,
-	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
-				   | ATMEL_LCDC_INVCLK
-				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-				   | ATMEL_LCDC_MEMOR_BIG),
-	.default_monspecs	= &mimc200_default_monspecs,
-	.guard_time		= 2,
-};
-
-struct eth_addr {
-	u8 addr[6];
-};
-static struct eth_addr __initdata hw_addr[2];
-static struct macb_platform_data __initdata eth_data[2];
-
-static struct spi_eeprom eeprom_25lc010 = {
-		.name = "25lc010",
-		.byte_len = 128,
-		.page_size = 16,
-		.flags = EE_ADDR1,
-};
-
-static struct spi_board_info spi0_board_info[] __initdata = {
-	{
-		.modalias	= "rtc-ds1390",
-		.max_speed_hz	= 4000000,
-		.chip_select	= 2,
-	},
-	{
-		.modalias	= "at25",
-		.max_speed_hz	= 1000000,
-		.chip_select	= 1,
-		.mode		= SPI_MODE_3,
-		.platform_data	= &eeprom_25lc010,
-	},
-};
-
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= GPIO_PIN_PA(26),
-		.wp_pin		= GPIO_PIN_PA(27),
-	},
-};
-
-/*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
- * ethernet address. But we need to keep it around for a while until
- * we can be reasonably sure the boot loader does this.
- *
- * The phy_id is ignored as the driver will probe for it.
- */
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-	int i;
-
-	i = tag->u.ethernet.mac_index;
-	if (i < ARRAY_SIZE(hw_addr))
-		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-		       sizeof(hw_addr[i].addr));
-
-	return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
-static void __init set_hw_addr(struct platform_device *pdev)
-{
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	const u8 *addr;
-	void __iomem *regs;
-	struct clk *pclk;
-
-	if (!res)
-		return;
-	if (pdev->id >= ARRAY_SIZE(hw_addr))
-		return;
-
-	addr = hw_addr[pdev->id].addr;
-	if (!is_valid_ether_addr(addr))
-		return;
-
-	/*
-	 * Since this is board-specific code, we'll cheat and use the
-	 * physical address directly as we happen to know that it's
-	 * the same as the virtual address.
-	 */
-	regs = (void __iomem __force *)res->start;
-	pclk = clk_get(&pdev->dev, "pclk");
-	if (IS_ERR(pclk))
-		return;
-
-	clk_enable(pclk);
-	__raw_writel((addr[3] << 24) | (addr[2] << 16)
-		     | (addr[1] << 8) | addr[0], regs + 0x98);
-	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-	clk_disable(pclk);
-	clk_put(pclk);
-}
-
-void __init setup_board(void)
-{
-	at32_map_usart(0, 0, 0);	/* USART 0: /dev/ttyS0 (TTL --> Altera) */
-	at32_map_usart(1, 1, 0);	/* USART 1: /dev/ttyS1 (RS232) */
-	at32_map_usart(2, 2, 0);	/* USART 2: /dev/ttyS2 (RS485) */
-	at32_map_usart(3, 3, 0);	/* USART 3: /dev/ttyS3 (RS422 Multidrop) */
-}
-
-static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin		= GPIO_PIN_PA(6),
-	.scl_pin		= GPIO_PIN_PA(7),
-	.sda_is_open_drain	= 1,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,	/* close to 100 kHz */
-};
-
-static struct platform_device i2c_gpio_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= {
-	.platform_data	= &i2c_gpio_data,
-	},
-};
-
-static struct i2c_board_info __initdata i2c_info[] = {
-};
-
-static int __init mimc200_init(void)
-{
-	/*
-	 * MIMC200 uses 16-bit SDRAM interface, so we don't need to
-	 * reserve any pins for it.
-	 */
-
-	at32_add_device_usart(0);
-	at32_add_device_usart(1);
-	at32_add_device_usart(2);
-	at32_add_device_usart(3);
-
-	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
-
-	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-	at32_add_device_mci(0, &mci0_data);
-	at32_add_device_usba(0, NULL);
-
-	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
-	at32_select_gpio(i2c_gpio_data.sda_pin,
-		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-	at32_select_gpio(i2c_gpio_data.scl_pin,
-		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-	platform_device_register(&i2c_gpio_device);
-	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
-
-	at32_add_device_lcdc(0, &mimc200_lcdc_data,
-			     fbmem_start, fbmem_size,
-			     ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_CONTROL | ATMEL_LCDC_ALT_24B_DATA);
-
-	return 0;
-}
-postcore_initcall(mimc200_init);