summaryrefslogtreecommitdiff
path: root/drivers/spi/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-09-14pci: Drop DM_PCISimon Glass1-1/+1
This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-12spi: rockchip_sfc: add support for Rockchip SFCChris Morgan1-0/+8
This patch adds support for the Rockchip serial flash controller found on the PX30 SoC. It should work for versions 3-5 of the SFC IP, however I am only able to test it on v3. This is adapted from the WIP SPI-MEM driver for the SFC on mainline Linux. Note that the main difference between this and earlier versions of the driver is that this one does not support DMA. In testing the performance difference (performing a dual mode read on a 128Mb chip) is negligible. DMA, if used, must also be disabled in SPL mode when using A-TF anyway. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-07-06spi: synquacer: Add HSSPI SPI controller driver for SynQuacerJassi Brar1-0/+8
This is a driver for the HSSPI SPI controller on SynQuacer SoC. The HSSPI has command sequence mode (memory mapped) and direct mode (FIFO access). The driver will operate it under the direct mode. And before booting OS, it switch back to the command sequence mode since that is compatible with default EDK2 behavior. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-06-25spi: Add MXIC controller driverZhengxun1-0/+7
Add a driver for Macronix SPI controller IP. This patch referred from linux spi-mxic.c. The difference from the linux version is described here. 1. To adapt uboot spi framework, modify some functions naming. 2. Remove the incompatible functions of Uboot. 3. Add dummy byte recalculattion function to support dummy buswidth not align data buswidth operation.(ex: 1-1-4, 1-1-8) 4. Add Octal mode support. Signed-off-by: Zhengxun <zhengxunli.mxic@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: fixed file permission, comment line, kconfig] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-01-29spi: mtk_snor: add support for MTK SPI NOR controllerSkyLake.Huang1-0/+7
This patch adds support for MTK SPI NOR controller, which you can see on mt7622 & mt7629. 1. This controller is designed only for SPI NOR. We can't adjust its bus clock dynamically. Set clock in dts instead. 2. This controller only supports 1-1-1 write mode. 3. Remove mtk_snor_match_read() since upper SPI-MEM layer already handles command. 4. sf read/write/update commands are tested with this driver. Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
2021-01-24spi: add spi controller support for MediaTek MT7620 SoCWeijie Gao1-0/+7
This patch adds spi controller support for MediaTek MT7620 SoC. The SPI controller supports two chip selects. These two chip selects are implemented as two separate register groups, but they share the same bus (DI/DO/CLK), only CS pins are dedicated for each register group. Appearently these two register groups cannot operates simulataneously so they are implemented as one controller. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-12-18spi: ca_sflash: Add CAxxxx SPI Flash ControllerPengpeng Chen1-0/+8
Add SPI Flash controller driver for Cortina Access CAxxxx SoCs Signed-off-by: Pengpeng Chen <pengpeng.chen@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Vignesh R <vigneshr@ti.com> CC: Tom Rini <trini@konsulko.com> [jagan: rebase on master] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22spi: Add Qualcomm QUP SPI controller driverRobert Marko1-0/+10
This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s. Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW. FIFO and Block modes are supported, no support for DMA mode is planned. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-23xilinx: kconfig: Change Kconfig dependencies for Xilinx driversMichal Simek1-3/+0
Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. This is follow up patch based on commit 664e16ce99a0 ("xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-03drivers: spi: Add SPI controller driver for OcteonSuneel Garapati1-0/+8
Adds support for SPI controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-07-16spi: fsl_qspi: Support to use full AHB space on i.MXYe Li1-0/+8
i.MX platforms provide large AHB mapped space for QSPI, each controller has 256MB. However, current driver only maps small size (AHB buffer size) of AHB space, this implementation causes i.MX failed to boot M4 with QSPI XIP image. Add config CONFIG_FSL_QSPI_AHB_FULL_MAP (default enabled for i.MX) to address above problem. When the config is set: 1. Full AHB space is divided to each CS. 2. A dedicated LUT entry is used for AHB read only. 3. The MODE instruction in LUT is replaced to standard ADDR instruction 4. The address in spi_mem_op is used to SFAR and AHB read Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
2020-07-10spi: kirkwood: Drop nondm codeBhargav Shah1-6/+6
Drop the nondm code from kirkwood_spi.c since there is no board or any other code using for it. Signed-off-by: Bhargav Shah <bhargavshah1988@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09spi: omap3: Drop nondm codeJagan Teki1-7/+7
Now all boards are using this omap3 spi driver in dm model, so drop the nondm code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11spi: davinci: Drop non-dm codeJagan Teki1-6/+6
Now all boards which are using davinci SPI driver have moved to SPL_DM so drop the unneeded non-dm code. Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2020-06-11spi: Zap SOFT_SPI (non-dm)Jagan Teki1-7/+6
- Deadline for DM migration already passed by months. - Sent couple of zap patches and - No response on dm conversation hence removed the driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11spi: mxs: Drop nondm codeJagan Teki1-6/+6
Deadline for DM migration already passed by months and no response on full dm conversation hence removed the nondm code. Note: Look like there is no user for nondm code for this driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01spi: Zap sh_spi driverJagan Teki1-7/+0
sh_spi driver is deprecated, no active updates and no board user, hence dropped the same. Cc: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01spi: Kconfig: Move MSCC_BB_SPI, FSL_QSPI into DM_SPIJagan Teki1-15/+15
- MSCC_BB_SPI - FSL_QSPI Both are fully dm-driven, let's move them into DM_SPI side definition. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01spi: Kconfig: Drop redundant CF_SPI definitionJagan Teki1-6/+0
CF_SPI kconfig option defined twice with DM_SPI and non DM_SPI. Drop the non DM_SPI side kconfig definition. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-10spi: Zap lpc32xx_ssp driver-related codeJagan Teki1-6/+0
lpc32xx_ssp driver is deprecated, no active updates and no board user, hence dropped the same. Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Albert ARIBAUD <albert.aribaud@3adev.fr> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-27spi: nxp_fspi: new driver for the FlexSPI controllerMichael Walle1-0/+7
This is a port of the kernel's spi-nxp-fspi driver. It uses the new spi-mem interface and does not expose the more generic spi-xfer interface. The source was taken from the v5.3-rc3 tag. The port was straightforward: - remove the interrupt handling and the completion by busy polling the controller - remove locks - move the setup of the memory windows into claim_bus() - move the setup of the speed into set_speed() - port the device tree bindings from the original fspi_probe() to ofdata_to_platdata() There were only some style change fixes, no change in any logic. For example, there are busy loops where the return code is not handled correctly, eg. only prints a warning with WARN_ON(). This port intentionally left most functions unchanged to ease future bugfixes. This was tested on a custom LS1028A board. Because the LS1028A doesn't have proper clock framework support, changing the clock speed was not tested. This also means that it is not possible to change the SPI speed on LS1028A for now (neither is it possible in the linux driver). Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Kuldeep Singh <kuldeep.singh@nxp.com>
2020-01-23spi: bcm63xx-hsspi: allow to use this driver on arm bcm68360Philippe Reynes1-1/+2
This IP is also used on some arm SoC, so we allow to use it on arm bcm68360 too. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-12-15x86: spi: Don't enable SPI_FLASH_BAR by defaultSimon Glass1-1/+0
We don't normally need this on x86 unless the size of SPI flash devices is larger than 16MB. This can be enabled by particular SoCs as needed, since it adds to code size. Drop the default enabling of this option on x86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-08configs: spi: Add the SPI_FLASH_BAR for ESPIXiaowei Bao1-0/+1
Add the SPI_FLASH_BAR for the ESPI controller of FSL, this entry is missed by commit 6d8251783641 ("configs: Don't use SPI_FLASH_BAR as default") Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-24spi: Kconfig: Enable SPI_SUNXI for SUNXIJagan Teki1-0/+1
SPI_SUNXI driver is fully dm-aware and the Allwinner architecture kconfig would have logic to enable the DM_SPI. So, select default spi sunxi driver for sunxi architecture. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-24spi: Kconfig: Add help textJagan Teki1-0/+17
Add detailed help text for SPI support. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-11spi: hsspi: allow to be used on bcm6858 and bcm63158Kursad Oney1-1/+1
This IP exists in both MIPS and ARM cores, so we also allow to use this driver on bcm6858 and bcm63158. Signed-off-by: Kursad Oney <kursad.oney@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-09-16spi: Kconfig: Unmark DEPRECATED for MXS_SPILukasz Majewski1-1/+0
MXS_SPI driver now partially converted into driver-model, so unmark the DEPRECATED option for the same. Signed-off-by: Lukasz Majewski <lukma@denx.de> [jagan: update the commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-25spi: Drop obsolete mtk_qspi driver referencesWeijie Gao1-8/+0
Since u-boot has added the spi-mem framework and replaced the spi-nor framework, the mtk_qspi is no longer compatible with the new spi-nor driver. Remove this driver along with replacing config item with new mtk spi-nor driver. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> [jagan: squash related changes and update commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-25spi: add spi-mem driver for MediaTek MT7629 SoCWeijie Gao1-0/+9
This patch adds spi-mem driver for MediaTek MT7629 SoC to access SPI-NOR and SPI-NAND flashes. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> [jagan: squash MAINTAINERS file] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-18spi: Add SiFive SPI driverBhargav Shah1-0/+8
This patch adds SiFive SPI driver. The driver is 100% DM driver and it determines input clock using clk framework. The SiFive SPI block is found on SiFive FU540 SOC and is used to access flash and MMC devices on SiFive Unleashed board. This driver implementation is inspired from the Linux SiFive SPI driver available in Linux-5.2 or higher and SiFive FSBL sources. Signed-off-by: Bhargav Shah <bhargavshah1988@gmail.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-12Merge tag 'dm-pull-9jul19-take2' of ↵Tom Rini1-1/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-dm - Sandbox improvements including .dts refactor - Minor tracing and PCI improvements - Various other minor fixes - Conversion of patman, dtoc and binman to support Python 3
2019-07-11sandbox: Correct spi flash operationSimon Glass1-1/+1
Since the SPI nor conversion, 'sf probe' does not work on sandbox. Fix this by using the expected compatible string in the flash node. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: cd35365762 (mtd: sf_probe: remove spi-flash compatible)
2019-07-10spi: Add SPI controller driver for UniPhier SoCsKunihiko Hayashi1-0/+8
Add SPI controller driver implemented in Socionext UniPhier SoCs. This controller has the SPI master mode only. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2019-07-09spi: Add Atmel QuadSPI driverTudor Ambarus1-0/+8
Backport the driver from linux v5.1-rc5 and adapt it for u-boot. Tested on sama5d2_xplained Rev B with mx25l25635e spi-nor flash. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-17Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini1-0/+4
- Drop zipitz2 board (Tom) - Add DEPRECATED option (Tom) - Mark legacy or non-dm drivers as DEPRECATED (Jagan)
2019-06-13spi: Kconfig: Mark LPC32XX_SSP as DEPRECATEDJagan Teki1-0/+1
Mark LPC32XX_SSP as DEPRECATED, this so the resulting build shows warning for deprecated configuration enabled and associated code will remove in v2019.07 release. Cc: Albert ARIBAUD <albert.aribaud@3adev.fr> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Sylvain Lemieux <slemieux@tycoint.com> [trini: Switch to DEPRECATED] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-13spi: Kconfig: Mark SOFT_SPI as DEPRECATEDJagan Teki1-0/+1
Mark SOFT_SPI as DEPRECATED, this so the resulting build shows warning for deprecated configuration enabled and associated code will remove in v2019.07 release. Cc: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [trini: Switch to DEPRECATED] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-13spi: Kconfig: Mark SH_SPI as DEPRECATEDJagan Teki1-0/+1
Mark SH_SPI as DEPRECATED, this so the resulting build shows warning for a deprecated configuration enabled and associated code will remove in v2019.07 release. Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [trini: Switch to DEPRECATED] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-13spi: Kconfig: Mark MXS_SPI has DEPRECATEDJagan Teki1-0/+1
Mark MXS_SPI as DEPRECATED, this so the resulting build shows warning for broken configuration enabled and associated code will remove in v2019.07 release. Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [trini: Switch to DEPRECATED] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-12Merge tag 'u-boot-stm32-20190606' of https://github.com/pchotard/u-bootTom Rini1-0/+8
- Add Ethernet support for STM32MP1 - Add saveenv support for STM32MP1 - Add STM32MP1 Avenger96 board support - Add SPI driver suport for STM32MP1 - Add watchdog support for STM32MP1 - Update power supply check via USB TYPE-C for STM32MP1 discovery board
2019-06-10Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini1-5/+5
- mpc8xxx spi driver fixes (Mario) - mpc8xxx spi dm conversion (Mario, Jagan) - SPI DM Migration update (Jagan)
2019-06-10spi: mpc8xxx: Convert to DMJagan Teki1-5/+5
Support DM in the MPC8xxx SPI driver, and remove the legacy SPI interface. Signed-off-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-06spi: stm32: Add Serial Peripheral Interface driver for STM32MPPatrice Chotard1-0/+8
Add SPI driver support for STM32MP SoCs family. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-24drivers: spi: cf_spi: add Kconfig optionAngelo Dureghello1-0/+6
This patch adds cf_spi DM Kconfig option. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2019-05-15Merge tag 'u-boot-stm32-mcu-20190514' of https://github.com/pchotard/u-bootTom Rini1-1/+1
STM32 MCUs update: _ Add MPU region for SPI NOR memory mapped region _ Add missing QSPI flash compatible for STM32 F7 boards _ Update spi-tx-bus-width and spi-rx-bus-width properties _ Add QSPI support for STM32F469 Discovery board
2019-05-07spi: rpc: Add support for operation without clock frameworkMarek Vasut1-1/+1
Add ifdeffery to allow operation without the clock framework enabled. This is required on RZ/A1, as it does not have clock driver yet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-06spi: Kconfig: Add STM32F4 support for STM32_QSPI driverPatrice Chotard1-1/+1
Allow to select STM32_QSPI driver on STM32F4 SoCs. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-03mips: rename mach-mt7620 to mach-mtmipsWeijie Gao1-1/+1
Currently mach-mt7620 contains only support for mt7628. To avoid confusion, rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms. MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628 because they do not share the same lowlevel codes. Dependencies of four drivers are changed to SOC_MT7628 as these drivers are only used by MT7628. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-04-17spi: ti_qspi: Drop non DM codeVignesh Raghavendra1-6/+7
Now that all boards using TI QSPI have moved to DM and DT, drop non DM code completely. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [jagan: update MIGRATION.txt, rebase config_whitelist.txt] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-29 12:32:13 +0300