summaryrefslogtreecommitdiff
path: root/arch/x86/dts/galileo.dts
AgeCommit message (Collapse)AuthorFilesLines
2021-08-02x86: dts: Define a default TSC timer frequencyBin Meng1-5/+2
If for some reason, TSC timer frequency cannot be determined from hardware, nor is it specified in the device tree, U-Boot will panic resulting in endless reset during boot. Let's define a default TSC timer frequency using the Kconfig value CONFIG_X86_TSC_TIMER_FREQ (note: #include must be used instead of /include/ otherwise the macro is not pre-processed). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02x86: tsc: Rename X86_TSC_TIMER_EARLY_FREQ to X86_TSC_TIMER_FREQBin Meng1-1/+1
Currently there are two places to specify the x86 TSC timer frequency with one in Kconfig used for early timer and the other one in device tree used when the frequency cannot be determined from hardware. This may potentially create an inconsistent config where the 2 values do not match. Let's use the one specified in Kconfig in the device tree as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-06x86: galileo: Use devicetree for SMBIOS settingsSimon Glass1-0/+28
Add settings and enable the default sysinfo driver so that these can come from the device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-12x86: dts: switch spi-flash to jedec, spi-nor compatibleNeil Armstrong1-1/+1
The x86 code and DT uses "spi-flash" to detect a flash node, switch to "jedec,spi-nor" in the DTS files and in fdtdec by switching the GENERIC_SPI_FLASH value to to jedec,spi-nor. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-20x86: Switch to use DM sysreset driverBin Meng1-0/+1
This converts all x86 boards over to DM sysreset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-06-13x86: irq: Remove chipset specific irq router driversBin Meng1-1/+1
At present there are 3 irq router drivers. One is the common one and the other two are chipset specific for queensbay and quark. However these are really the same drivers as the core logic is the same. The two chipset specific drivers configure some registers that are outside the irq router block which should really be part of the chipset initialization. Now we remove these specific drivers and make all x86 boards use the common one. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-23x86: galileo: Enable CPU driverBin Meng1-0/+12
Add a cpu node in the device tree and enable CPU driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23x86: dts: Update to include ACTL register detailsBin Meng1-0/+1
This updates all x86 boards that currently have IRQ router in the dts files to include ACTL register details. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: ich6_gpio: Convert to use proper DM APIBin Meng1-13/+15
At present this GPIO driver still uses the legacy PCI API. Now that we have proper PCH drivers we can use those to obtain the information we need. While the device tree has nodes for the GPIO peripheral it is not in the right place. It should be on the PCI bus as a sub-peripheral of the PCH device. Update the device tree files to show the GPIO controller within the PCH, so that PCI access works as expected. This also adds '#address-cells' and '#size-cells' to the PCH node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05spi: ich: Use compatible strings to distinguish controller versionBin Meng1-1/+1
At present ich spi driver gets the controller version information via pch, but this can be simply retrieved via spi node's compatible string. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> Tested-by: Simon Glass <sjg@chromium.org>
2016-01-28x86: Correct spi node aliasBin Meng1-2/+2
With recent changes spi node was moved to a place as a subnode under pch, so update the alias to refer to its correct place as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-24dm: x86: quark: Add an interrupt driverSimon Glass1-1/+1
Add a driver for interrupts on quark and move the code currently in cpu_irq_init() into its probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: spi: Convert ICH SPI driver to driver model PCI APISimon Glass1-47/+52
At present this SPI driver works by searching the PCI buses for its peripheral. It also uses the legacy PCI API. In addition the driver has code to determine the type of Intel PCH that is used (version 7 or version 9). Now that we have proper PCH drivers we can use those to obtain the information we need. While the device tree has a node for the SPI peripheral it is not in the right place. It should be on the PCI bus as a sub-peripheral of the LPC device. Update the device tree files to show the SPI controller within the PCH, so that PCI access works as expected. This patch includes Bin's fix-up patch from here: https://patchwork.ozlabs.org/patch/569478/ Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-09x86: Fix PCI UART compatible string for crownbay and galileoBin Meng1-1/+1
With recent ns16550 driver changes, we only changed the legacy UART (at I/O port 0x3f8) compatible string, but forgot to change the PCI UART compatible string. Now fix it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01x86: Convert to use driver model timerBin Meng1-0/+5
Convert all x86 boards to use driver model tsc timer. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21x86: galileo: Enable mrc cacheBin Meng1-0/+4
Now that we have added MRC cache on quark support codes, enable it on Intel Galileo board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-09-17x86: galileo: Add PCIe root port IRQ routingBin Meng1-0/+12
Now we have enabled PCIe root port on Quark SoC, add its PIRQ routing information in the device tree as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-09-09x86: Convert to use driver model pci on quark/galileoBin Meng1-2/+6
Move to driver model pci for Intel quark/galileo. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28x86: Enable DM RTC support for all x86 boardsBin Meng1-0/+1
Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-06-04x86: quark: Implement PIRQ routingBin Meng1-0/+22
Intel Quark SoC has the same interrupt routing mechanism as the Queensbay platform, only the difference is that PCI devices' INTA/B/C/D are harcoded and cannot be changed freely. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-30x86: Add alias for SPI node in the board dtsBin Meng1-0/+4
Since Intel ICH SPI driver has been converted to driver model, we need add an alias for SPI node in the board dts files otherwise SPI flash won't be detected due to 'invalid bus' error. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06x86: Add SPI support to quark/galileoBin Meng1-0/+13
The Quark SoC contains a legacy SPI controller in the legacy bridge which is ICH7 compatible. Like Tunnel Creek and BayTrail, the BIOS control register offset in the ICH SPI driver is wrong for the Quark SoC too, unprotect_spi_flash() is added to enable the flash write. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06x86: galileo: Add GPIO supportBin Meng1-0/+14
Quark SoC has a legacy GPIO block in the legacy bridge (D0:F31), which is just the same one found in other x86 chipset. Since we programmed the GPIO register block base address, we should be able to enable the GPIO support on Intel Galileo board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06x86: quark: Call MRC in dram_init()Bin Meng1-0/+25
Now that we have added Quark MRC codes, call MRC in dram_init() so that DRAM can be initialized on a Quark based board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-02-06x86: Add basic Intel Galileo board supportBin Meng1-0/+43
New board/intel/galileo board directory with minimum codes, plus board dts, defconfig and configuration files. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 19:42:52 +0300