diff options
Diffstat (limited to 'include/configs')
304 files changed, 897 insertions, 39 deletions
diff --git a/include/configs/A3000.h b/include/configs/A3000.h index 0532a75db8..ffc58af309 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -45,6 +45,7 @@ #define CONFIG_MPC8245 1 #define CONFIG_A3000 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h index d8303f3b8c..263dab2361 100644 --- a/include/configs/ADCIOP.h +++ b/include/configs/ADCIOP.h @@ -36,6 +36,8 @@ #define CONFIG_IOP480 1 /* This is a IOP480 CPU */ #define CONFIG_ADCIOP 1 /* ...on a ADCIOP board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFD0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h index 688e77a731..82ea172d7a 100644 --- a/include/configs/ADS860.h +++ b/include/configs/ADS860.h @@ -20,6 +20,8 @@ /* Processor type */ #define CONFIG_MPC860 1 +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h index 6e2907e7ef..095c7f0e64 100644 --- a/include/configs/AMX860.h +++ b/include/configs/AMX860.h @@ -36,6 +36,8 @@ #define CONFIG_MPC860 1 #define CONFIG_AMX860 1 +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #undef CONFIG_8xx_CONS_SMC1 /* Console is on SCC2 */ #undef CONFIG_8xx_CONS_SMC2 #define CONFIG_8xx_CONS_SCC2 1 diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index 875cb142b8..a8edafa1bb 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -27,6 +27,13 @@ #define CONFIG_AP1000 1 /* ...on an AP1000 board */ +/* + * Start at bottom of RAM, but at an aliased address so that it looks + * like it's not in RAM. This is a bit of voodoo to allow it to be + * run from RAM instead of Flash. + */ +#define CONFIG_SYS_TEXT_BASE 0x08000000 + #define CONFIG_PCI 1 #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ diff --git a/include/configs/APC405.h b/include/configs/APC405.h index cb3f80bfa0..8179e1b043 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -38,6 +38,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_APCG405 1 /* ...on a APC405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_BOARD_EARLY_INIT_R 1 #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/AR405.h b/include/configs/AR405.h index d3c60f2097..0725e6f1cf 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_AR405 1 /* ...on a AR405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 789f7501fd..c8b96132f4 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_ASH405 1 /* ...on a ASH405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index 388234cfe8..b544a4772a 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h @@ -47,6 +47,10 @@ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8548 1 /* MPC8548 specific */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#endif + #define CONFIG_PCI 1 /* enable any pci type devices */ #define CONFIG_PCI1 1 /* PCI controller 1 */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ diff --git a/include/configs/Adder.h b/include/configs/Adder.h index 7371a9ccf5..4d7c5172c2 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -32,6 +32,8 @@ #define CONFIG_ADDER /* Analogue&Micro Adder board */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_BAUDRATE 38400 diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index d9c27efb17..7fba1b39c2 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -31,6 +31,8 @@ #define CONFIG_MPC8220 1 #define CONFIG_ALASKA8220 1 /* ... on Alaska board */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h index 555145e189..0cfd5d94fa 100644 --- a/include/configs/BAB7xx.h +++ b/include/configs/BAB7xx.h @@ -35,6 +35,8 @@ * (easy to change) */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + /* these hardware addresses are pretty bogus, please change them to suit your needs */ diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index f6246faeee..4fbcb7d7ed 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -56,6 +56,16 @@ #define CONFIG_BC3450_FP 1 /* + enable FP O/P */ #undef CONFIG_BC3450_CRT /* + enable CRT O/P (Debug only!) */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFC000000 boot low (standard configuration with room for + * max 64 MByte Flash ROM) + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFC000000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 6e7f012b9c..134ad1fa0b 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -45,6 +45,8 @@ #define CONFIG_MPC8245 1 #define CONFIG_BMW 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ #define CONFIG_BCM570x 1 /* Use Broadcom BCM570x Ethernet Driver */ diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h index c7854abc46..9d75616a83 100644 --- a/include/configs/CANBT.h +++ b/include/configs/CANBT.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CANBT 1 /* ...on a CANBT board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 764f71be3e..81f6391199 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -75,6 +75,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */ + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 099e30de85..6438b72582 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_VOM405 1 /* ...on a VOM405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC8000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 8ba3c7d440..f75050090b 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -45,6 +45,7 @@ #define CONFIG_MPC8245 1 #define CONFIG_CPC45 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index c6882fdda3..ba875eccc6 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -36,6 +36,8 @@ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index e0066211ab..4a47c7abe1 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index d682d3726f..be3742feb9 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -39,6 +39,8 @@ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ #undef CONFIG_CPCI405_6U /* enable this for 6U boards */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 1c521f2a3f..3e1b482836 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -39,6 +39,8 @@ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ #define CONFIG_CPCI405AB 1 /* ...and special AB version */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index c7b79311cc..342bcc36f1 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -38,6 +38,8 @@ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index f2d51f75ee..68a27e663a 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -57,6 +57,8 @@ #define CONFIG_CPCI750 1 /* this is an CPCI750 board */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ #define CONFIG_MV64360_ECC /* enable ECC support */ diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index f114290130..0f11a75e5d 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCIISER4 1 /* ...on a CPCIISER4 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index 0927f2c5de..3aa35c3e2a 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -37,6 +37,12 @@ #define CONFIG_CPU86 1 /* ...on a CPU86 board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#ifdef CONFIG_BOOT_ROM +#define CONFIG_SYS_TEXT_BASE 0xFF800000 +#else +#define CONFIG_SYS_TEXT_BASE 0xFF000000 +#endif + /* * select serial console configuration * diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index c50ff99964..82b6411879 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -38,6 +38,12 @@ #define CONFIG_PCI #define CONFIG_CPM2 1 /* Has a CPM2 */ +#ifdef CONFIG_BOOT_ROM +#define CONFIG_SYS_TEXT_BASE 0xFF800000 +#else +#define CONFIG_SYS_TEXT_BASE 0xFF000000 +#endif + /* * select serial console configuration * diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index da0a57625a..77b6a15dc2 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -36,6 +36,13 @@ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC405 family */ + +/* + * Note: I make an "image" from U-Boot itself, which prefixes 0x40 + * bytes of header info, hence start address is thus shifted. + */ +#define CONFIG_SYS_TEXT_BASE 0xFFFD0040 + #define CONFIG_SYS_CLK_FREQ 25000000 #define CONFIG_BAUDRATE 9600 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/CU824.h b/include/configs/CU824.h index e093120bc5..4a7d8705f5 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -45,6 +45,7 @@ #define CONFIG_MPC8240 1 #define CONFIG_CU824 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h index 21230e158c..7ace011a25 100644 --- a/include/configs/DASA_SIM.h +++ b/include/configs/DASA_SIM.h @@ -36,6 +36,8 @@ #define CONFIG_IOP480 1 /* This is a IOP480 CPU */ #define CONFIG_DASA_SIM 1 /* ...on a DASA_SIM board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index 910933ad58..3a20d02e55 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -120,6 +120,8 @@ if we use PCI it has its own MAC addr */ #define CONFIG_DB64360 1 /* this is an DB64360 board */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ /*ronen - we don't use the global CONFIG_ECC, since in the global ecc we initialize the DRAM for ECC in the phase we are relocating to it, which isn't so sufficient. diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index 765eaaf0fb..ef5277ef05 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -58,6 +58,8 @@ #define CONFIG_DB64460 1 /* this is an DB64460 board */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ /*ronen - we don't use the global CONFIG_ECC, since in the global ecc we initialize the DRAM for ECC in the phase we are relocating to it, which isn't so sufficient. diff --git a/include/configs/DP405.h b/include/configs/DP405.h index f86305ed3e..3cdf3e8b46 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_DP405 1 /* ...on a DP405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFD0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 6ba9f13bf1..d6c9f4bc9f 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -36,6 +36,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_DU405 1 /* ...on a DU405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFD0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index c36185dd0c..baa54b4559 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -37,6 +37,10 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333400 /* external freq to pll */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 +#endif + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ #define CONFIG_LAST_STAGE_INIT 1 /* last_stage_init */ diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index 84d27b67a9..1650e65e13 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -35,6 +35,8 @@ * (easy to change) */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + /* these hardware addresses are pretty bogus, please change them to suit your needs */ diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h index 0f56302003..99d0eb1ed5 100644 --- a/include/configs/ELPT860.h +++ b/include/configs/ELPT860.h @@ -47,6 +47,8 @@ #define CONFIG_MPC860T 1 #define CONFIG_ELPT860 1 /* ...on a LEOX's ELPT860 CPU board */ +#define CONFIG_SYS_TEXT_BASE 0x02000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h index aa5de9b4d5..6204229339 100644 --- a/include/configs/EP88x.h +++ b/include/configs/EP88x.h @@ -30,6 +30,8 @@ #define CONFIG_EP88X /* Embedded Planet EP88x board */ +#define CONFIG_SYS_TEXT_BASE 0xFC000000 + #define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index da3b4ae22a..094db45e90 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_ERIC 1 /* ...on a ERIC board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* run board_early_init_f() */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h index 11a862e987..1f0d2bb2d6 100644 --- a/include/configs/ESTEEM192E.h +++ b/include/configs/ESTEEM192E.h @@ -36,6 +36,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_ESTEEM192E 1 /* ...on a EST ESTEEM192E */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_FLASH_16BIT 1 /* Rom 16 bit data bus */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h index c36f2bb18c..366df3a66f 100644 --- a/include/configs/ETX094.h +++ b/include/configs/ETX094.h @@ -36,6 +36,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_ETX094 1 /* ...on a ETX_094 board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h index 0903536348..ebc36bbb3a 100644 --- a/include/configs/EVB64260.h +++ b/include/configs/EVB64260.h @@ -42,6 +42,8 @@ #define CONFIG_EVB64260 1 /* this is an EVB64260 board */ #define CONFIG_SYS_GT_6426x GT_64260 /* with a 64260 system controller */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */ #undef CONFIG_ECC /* enable ECC support */ diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index cb759602b9..0b7aee265b 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -38,6 +38,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_ETHADDR 08:00:22:50:70:63 /* Ethernet address */ #define CONFIG_ENV_OVERWRITE 1 /* Overwrite the environment */ diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h index 84187fbb4d..c2c9093f51 100644 --- a/include/configs/FADS850SAR.h +++ b/include/configs/FADS850SAR.h @@ -34,6 +34,8 @@ #define CONFIG_MPC850SAR 1 #define CONFIG_FADS 1 +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h index dcb0c39445..ed7484bd1c 100644 --- a/include/configs/FADS860T.h +++ b/include/configs/FADS860T.h @@ -20,6 +20,8 @@ /* processor type */ #define CONFIG_MPC860T 1 /* 860T */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index 0f4277c4e3..4f526b7bde 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -37,6 +37,8 @@ #define CONFIG_FLAGADM 1 /* ...on a FLAGA DM */ #define CONFIG_8xx_GCLK_FREQ 48000000 /*48MHz*/ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #undef CONFIG_8xx_CONS_SMC1 /* Console is on SMC1 */ #define CONFIG_8xx_CONS_SMC2 1 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index addca2fe3a..ac0c48ebf6 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -36,6 +36,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_FPS850L 1 /* ...on a FingerPrint Sensor */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index ec9000d9fc..ffb40e0051 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -36,6 +36,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_FPS860L 1 /* ...on a FingerPrint Sensor */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/G2000.h b/include/configs/G2000.h index e2e6cb29ce..2865b84966 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_G2000 1 /* ...on a PLU405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index 12f879a0e0..a2b934fd94 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -35,6 +35,8 @@ #define CONFIG_MPC860 #define CONFIG_GEN860T +#define CONFIG_SYS_TEXT_BASE 0x40000000 + /* * Identify the board */ diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h index fadd83027b..4faafe5b6e 100644 --- a/include/configs/GENIETV.h +++ b/include/configs/GENIETV.h @@ -38,6 +38,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_TEXT_BASE 0x00000000 + #define CONFIG_ETHADDR 08:00:22:50:70:63 /* Ethernet address */ #define CONFIG_ENV_OVERWRITE 1 /* Overwrite the environment */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 8991db4130..661db2b16e 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -43,6 +43,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_HH405 1 /* ...on a HH405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index 359187a751..ac6a455f5c 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -42,6 +42,8 @@ #define CONFIG_MPC8245 1 #define CONFIG_HIDDEN_DRAGON 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #if 0 #define USE_DINK32 1 #else diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 5dea96ef5b..b7a8dae7e2 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_HUB405 1 /* ...on a HUB405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h index ea1e706eed..54e8a72a20 100644 --- a/include/configs/IAD210.h +++ b/include/configs/IAD210.h @@ -44,6 +44,8 @@ #define CONFIG_MPC860T 1 #define CONFIG_MPC862 1 +#define CONFIG_SYS_TEXT_BASE 0x08000000 + #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CONFIG_8xx_CONS_SMC1 diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index f286449e3b..635f916652 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -39,6 +39,8 @@ #define CONFIG_ICU862 1 #define CONFIG_MPC862 1 +#define CONFIG_SYS_TEXT_BASE 0x40F00000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 52a57a9d0d..a3a79e876e 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -39,6 +39,8 @@ #define CPU_ID_STR "MPC8247" #define CONFIG_CPM2 1 /* Has a CPM2 */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/IP860.h b/include/configs/IP860.h index ed6b7fde9c..eef1d6b5b5 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -35,6 +35,9 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_IP860 1 /* ...on a IP860 board */ + +#define CONFIG_SYS_TEXT_BASE 0x10000000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index 9d19e37bb7..88ef4bb423 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -38,6 +38,8 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_IPHASE4539 1 /* ...on a Interphase 4539 PMC */ +#define CONFIG_SYS_TEXT_BASE 0xffb00000 + #define CONFIG_CPM2 1 /* Has a CPM2 */ /*----------------------------------------------------------------------- diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index 3ea7e5daec..bcd73484dc 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -33,6 +33,8 @@ #define CONFIG_ISPAN /* ...on one of Interphase iSPAN boards */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#define CONFIG_SYS_TEXT_BASE 0xFE7A0000 + /*----------------------------------------------------------------------- * Select serial console configuration * diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index 1a4924e1e6..5cc8e9a476 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -36,6 +36,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_IVML24 1 /* ...on a IVML24 board */ +#define CONFIG_SYS_TEXT_BASE 0xFF000000 + #if defined (CONFIG_IVML24_16M) # define CONFIG_IDENT_STRING " IVML24" #elif defined (CONFIG_IVML24_32M) diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index 256cabd036..ed73b570cf 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -36,6 +36,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_IVMS8 1 /* ...on a IVMS8 board */ +#define CONFIG_SYS_TEXT_BASE 0xFF000000 + #if defined (CONFIG_IVMS8_16M) # define CONFIG_IDENT_STRING " IVMS8" #elif defined (CONFIG_IVMS8_32M) diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index b62945e838..327b0bbb1e 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -33,6 +33,17 @@ #define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFFF00000 boot high (standard configuration) + * 0xFF000000 boot low for 16 MiB boards + * 0xFF800000 boot low for 8 MiB boards + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index b0b117575c..69711581a6 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -37,7 +37,7 @@ /* JSE has a PPC405GPr */ #define CONFIG_405GP 1 /* ... which is a 4xxx series */ -#define CONFIG_4xx 1 +#define CONFIG_4x 1 /* ... with a 33MHz OSC. connected to the SysCLK input */ #define CONFIG_SYS_CLK_FREQ 33333333 /* ... with on-chip memory here (4KBytes) */ @@ -46,6 +46,8 @@ /* Do not set up locked dcache as init ram. */ #undef CONFIG_SYS_INIT_DCACHE_CS +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + /* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */ #define CONFIG_SYSTEMACE 1 #define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000 diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 94cc31756c..5b6da4ff0b 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -43,6 +43,9 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ + +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + #undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index c6978c3352..b5f48b11da 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -38,6 +38,8 @@ #define CONFIG_MPC855 1 /* This is a MPC855 CPU */ #define CONFIG_KUP4K 1 /* ...on a KUP4K module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index ab535e15b5..7fea5f772c 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -38,6 +38,8 @@ #define CONFIG_MPC859T 1 /* This is a MPC859T CPU */ #define CONFIG_KUP4X 1 /* ...on a KUP4X module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 6e8a4b8085..d10958d06a 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -40,6 +40,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_LANTEC 2 /* ...on a Lantec rev.2 board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + /* * Port assignments (CONFIG_LANTEC == 1): * - SMC1: J11 (MDB) ? diff --git a/include/configs/MBX.h b/include/configs/MBX.h index 5f7c7a8e4f..7cda287cfb 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -46,6 +46,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_MBX 1 /* ...on an MBX module */ +#define CONFIG_SYS_TEXT_BASE 0xfe000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h index afe23836ce..aed17297c3 100644 --- a/include/configs/MBX860T.h +++ b/include/configs/MBX860T.h @@ -28,6 +28,8 @@ #define CONFIG_MPC860T 1 #define CONFIG_MBX 1 +#define CONFIG_SYS_TEXT_BASE 0xfe000000 + #define CONFIG_8xx_CPUCLOCK 40 #define CONFIG_8xx_BUSCLOCK (CONFIG_8xx_CPUCLOCK) #define TARGET_SYSTEM_FREQUENCY 40 diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 2e63306d97..04ae4f883a 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -109,6 +109,9 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ + +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + #undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index 19a288c582..7ad2712ca8 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -43,6 +43,8 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* do special hardware init. */ #define CONFIG_MISC_INIT_R 1 +#define CONFIG_SYS_TEXT_BASE 0xfe000000 + #define CONFIG_8xx_GCLK_FREQ MPC8XX_SPEED #undef CONFIG_8xx_CONS_SMC1 #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index bfff7504fc..a097639ef6 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -35,6 +35,9 @@ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_MIP405 1 /* ...on a MIP405 board */ + +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + /*********************************************************** * Note that it may also be a MIP405T board which is a subset of the * MIP405 diff --git a/include/configs/ML2.h b/include/configs/ML2.h index 2fc0119e5f..8f56902e63 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -30,6 +30,7 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_ML2 1 /* ...on a ML2 board */ +#define CONFIG_SYS_TEXT_BASE 0x18000000 #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 986590aaaf..9dccd2418a 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -48,7 +48,11 @@ #define CONFIG_MPC824X 1 #define CONFIG_MPC8240 1 #define CONFIG_MOUSSE 1 + +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_SYS_ADDR_MAP_B 1 + #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 #if 1 diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index cb406aea01..fd7ef90cf2 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -48,6 +48,10 @@ #define CONFIG_MPC8260ADS 1 /* Motorola PQ2 ADS family board */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */ +#endif + #define CONFIG_CPM2 1 /* Has a CPM2 */ /* diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 376ff3e29e..1fbc190476 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -53,6 +53,8 @@ #define CONFIG_MPC8266ADS 1 /* ...on motorola ADS board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#define CONFIG_SYS_TEXT_BASE 0xfe000000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index b717c1bbef..de03a97d39 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -33,6 +33,8 @@ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_MISC_INIT_R /* diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 18af02871f..3eca719bdc 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -35,6 +35,10 @@ #define CONFIG_MPC8313 1 #define CONFIG_MPC8313ERDB 1 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFE000000 +#endif + #define CONFIG_PCI #define CONFIG_FSL_ELBC 1 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index b0f5cbde3d..2e6cc51213 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -27,7 +27,11 @@ #ifdef CONFIG_NAND #define CONFIG_NAND_U_BOOT 1 -#define CONFIG_RAMBOOT_TEXT_BASE 0x00100000 +#define CONFIG_SYS_TEXT_BASE 0x00100000 +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFE000000 #endif /* diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index f81ca8c642..177e6e9b4e 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -17,6 +17,8 @@ #define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC832x 1 /* MPC832x CPU specific */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_PCI 1 /* diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f57290a279..fe51208941 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -28,8 +28,8 @@ #define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC832x 1 /* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ -#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ -#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ + +#define CONFIG_SYS_TEXT_BASE 0xFE000000 /* * System Clock Setup diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 8e508b6f15..6f02db0278 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 + * (C) Copyright 2006-2010 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -38,8 +38,10 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ -#define PCI_66M -#ifdef PCI_66M +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + +#define CONFIG_PCI_66M +#ifdef CONFIG_PCI_66M #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ #else #define CONFIG_83XX_CLKIN 33000000 /* in Hz */ @@ -51,7 +53,7 @@ #endif /* CONFIG_PCISLAVE */ #ifndef CONFIG_SYS_CLK_FREQ -#ifdef PCI_66M +#ifdef CONFIG_PCI_66M #define CONFIG_SYS_CLK_FREQ 66000000 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 #else diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 3659d88255..d49c1ff76b 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -67,6 +67,10 @@ #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ #define CONFIG_MPC8349 /* MPC8349 specific */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFEF00000 +#endif + #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ #define CONFIG_MISC_INIT_F @@ -394,8 +398,8 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif -#define PCI_66M -#ifdef PCI_66M +#define CONFIG_PCI_66M +#ifdef CONFIG_PCI_66M #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ #else #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 5449d0fd7a..e5165e9473 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -30,6 +30,9 @@ #define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ + +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ #undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 680e329d03..dbbeeca57a 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -26,18 +26,20 @@ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360ERDK 1 /* MPC8360ERDK board specific */ +#define CONFIG_SYS_TEXT_BASE 0xFF800000 + /* * System Clock Setup */ #ifdef CONFIG_CLKIN_33MHZ #define CONFIG_83XX_CLKIN 33333333 #define CONFIG_SYS_CLK_FREQ 33333333 -#define PCI_33M 1 +#define CONFIG_PCI_33M 1 #define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_10X1 #else #define CONFIG_83XX_CLKIN 66000000 #define CONFIG_SYS_CLK_FREQ 66000000 -#define PCI_66M 1 +#define CONFIG_PCI_66M 1 #define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_5X1 #endif /* CONFIG_CLKIN_33MHZ */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 45b22a5acc..5d30c790da 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -29,6 +29,8 @@ #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ #define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + /* * System Clock Setup */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index d69d25e401..afc37b5c60 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -30,6 +30,8 @@ #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ #define CONFIG_MPC837XERDB 1 +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_PCI 1 #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 8ef24e62dd..cc83d92479 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -36,17 +36,21 @@ #ifdef CONFIG_NAND #define CONFIG_NAND_U_BOOT 1 #define CONFIG_RAMBOOT_NAND 1 -#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f82000 +#define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD 1 -#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000 +#define CONFIG_SYS_TEXT_BASE 0xf8f80000 #endif #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH 1 -#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000 +#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 #endif /* High Level Configuration Options */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 84db2fb70f..4ac1f6e822 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -41,6 +41,12 @@ #define CONFIG_MPC8540 1 /* MPC8540 specific */ #define CONFIG_MPC8540ADS 1 /* MPC8540ADS board specific */ +/* + * default CCARBAR is at 0xff700000 + * assume U-Boot is less than 0.5MB + */ +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #ifndef CONFIG_HAS_FEC #define CONFIG_HAS_FEC 1 /* 8540 has FEC */ #endif diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 66fea852f8..85ecf47252 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -36,6 +36,8 @@ #define CONFIG_MPC8540 1 /* MPC8540 specific */ #define CONFIG_MPC8540EVAL 1 /* MPC8540EVAL board specific */ +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #undef CONFIG_PCI /* pci ethernet support */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 359426924d..5bd851ff16 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -37,6 +37,8 @@ #define CONFIG_MPC8541 1 /* MPC8541 specific */ #define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */ +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #define CONFIG_PCI #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 3af7f6de86..5322a2368f 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -34,6 +34,10 @@ #define CONFIG_MPC8544 1 #define CONFIG_MPC8544DS 1 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#endif + #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCI1 1 /* PCI controller 1 */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index cda3936a06..2d99358287 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -36,6 +36,10 @@ #define CONFIG_MPC8548 1 /* MPC8548 specific */ #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#endif + #define CONFIG_PCI /* enable any pci type devices */ #define CONFIG_PCI1 /* PCI controller 1 */ #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index b22f4d0204..7bc1bcefb6 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -37,6 +37,8 @@ #define CONFIG_MPC8555 1 /* MPC8555 specific */ #define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */ +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #define CONFIG_PCI #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index cdb66636ae..fad180ffb7 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -42,6 +42,12 @@ #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ #define CONFIG_MPC8560 1 +/* + * default CCARBAR is at 0xff700000 + * assume U-Boot is less than 0.5MB + */ +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #define CONFIG_PCI #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 3a405d46dd..054991e716 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -33,6 +33,8 @@ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCI1 1 /* PCI controller */ #define CONFIG_PCIE1 1 /* PCIE controller */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index d09b2f721c..62a4039d69 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -65,7 +65,11 @@ extern unsigned long get_clock_freq(void); #ifdef CONFIG_NAND #define CONFIG_NAND_U_BOOT 1 #define CONFIG_RAMBOOT_NAND 1 -#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f82000 +#define CONFIG_SYS_TEXT_BASE 0xf8f82000 +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfff80000 #endif /* diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 9601029618..336d62d12b 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -41,6 +41,10 @@ #define CONFIG_MPC8572DS 1 #define CONFIG_MP 1 /* support multiple processors */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 004b764b29..9128c985fb 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -19,6 +19,8 @@ #define CONFIG_MPC8610HPCD 1 /* MPC8610HPCD board specific */ #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ /* video */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index a46ec28f59..c4efababd5 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -41,6 +41,12 @@ /*#define CONFIG_PHYS_64BIT 1*/ /* Place devices in 36-bit space */ #define CONFIG_ADDR_MAP 1 /* Use addr map */ +/* + * default CCSRBAR is at 0xff700000 + * assume U-Boot is less than 0.5MB + */ +#define CONFIG_SYS_TEXT_BASE 0xeff00000 + #ifdef RUN_DIAG #define CONFIG_SYS_DIAG_ADDR CONFIG_SYS_FLASH_BASE #endif diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h index 85c68900ce..beada7ee2a 100644 --- a/include/configs/MPC86xADS.h +++ b/include/configs/MPC86xADS.h @@ -28,6 +28,8 @@ #undef CONFIG_MPC859DSL #undef CONFIG_MPC852T +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h index 8ffc1b2b15..eeb2355b9f 100644 --- a/include/configs/MPC885ADS.h +++ b/include/configs/MPC885ADS.h @@ -15,6 +15,8 @@ #define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index c0c716d232..e60063985b 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -45,6 +45,7 @@ #define CONFIG_MPC8245 1 #define CONFIG_MUSENKI 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index 05603bec43..cd867666c3 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -32,6 +32,10 @@ #define CONFIG_MPC5xxx 1 #define CONFIG_MPC5200 1 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFF800000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 #define BOOTFLAG_COLD 0x01 diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 1cfdef5f49..9ec03d9a46 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -37,6 +37,8 @@ #define CONFIG_MPC834x 1 #define CONFIG_MPC8343 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_SYS_IMMR 0xE0000000 #define CONFIG_PCI @@ -186,7 +188,7 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 3 -#define PCI_66M +#define CONFIG_PCI_66M #define CONFIG_83XX_CLKIN 66666667 #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index cff33047fd..bee1327354 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -43,6 +43,8 @@ #define MVBLUE_BOARD_BOX 1 #define MVBLUE_BOARD_LYNX 2 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #if 0 #define ERR_LED(code) do { if (code) \ *(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \ diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index 074e55579e..ec93245ef2 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -32,6 +32,10 @@ #define CONFIG_MPC5xxx 1 #define CONFIG_MPC5200 1 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFF800000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 #define BOOTFLAG_COLD 0x01 diff --git a/include/configs/NC650.h b/include/configs/NC650.h index b0a42d61f7..8d1d45de5a 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -36,6 +36,8 @@ #define CONFIG_MPC852T 1 #define CONFIG_NC650 1 +#define CONFIG_SYS_TEXT_BASE 0x40700000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index 76ca916636..24d9110a69 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -41,6 +41,8 @@ #define CONFIG_MPC870 1 /* This is a MPC885 CPU */ #define CONFIG_NETPHONE 1 /* ...on a NetPhone board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 4f9f9fe0f1..3c2c958a50 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -37,6 +37,8 @@ #define CONFIG_MPC885 1 /* This is a MPC885 CPU */ #define CONFIG_NETTA 1 /* ...on a NetTA board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index d060cb7a42..a89c77d3db 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -41,6 +41,8 @@ #define CONFIG_MPC870 1 /* This is a MPC885 CPU */ #define CONFIG_NETTA2 1 /* ...on a NetTA2 board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index a18b480127..0cc07f8230 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -37,6 +37,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_NETVIA 1 /* ...on a NetVia board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 6a4c47d888..cd8c769643 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -37,6 +37,8 @@ #define CONFIG_TQM855M 1 /* ...on a TQM8xxM module */ #define CONFIG_NSCU 1 +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SCC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/NX823.h b/include/configs/NX823.h index 5054d5e61f..70c6bb5cfa 100644 --- a/include/configs/NX823.h +++ b/include/configs/NX823.h @@ -39,6 +39,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_NX823 1 /* ...on a NEXUS 823 module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + /*#define CONFIG_VIDEO 1 */ #define CONFIG_8xx_GCLK_FREQ MPC8XX_SPEED diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index ad2e4da389..a275b548e5 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_OCRTC 1 /* ...on a OCRTC board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFD0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ diff --git a/include/configs/OXC.h b/include/configs/OXC.h index 7f4babeede..76d8b04707 100644 --- a/include/configs/OXC.h +++ b/include/configs/OXC.h @@ -39,6 +39,8 @@ #define CONFIG_MPC8240 1 #define CONFIG_OXC 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_IDENT_STRING " [oxc] " diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index f3c2883200..5d127cfd78 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -22,6 +22,10 @@ #define CONFIG_P1022DS #define CONFIG_MP /* support multiple processors */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ #define CONFIG_PCI /* Enable PCI/PCIE */ #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 0b0822d584..8c373fa248 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -46,17 +46,21 @@ #ifdef CONFIG_NAND #define CONFIG_NAND_U_BOOT 1 #define CONFIG_RAMBOOT_NAND 1 -#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f82000 +#define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD 1 -#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000 +#define CONFIG_SYS_TEXT_BASE 0xf8f80000 #endif #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH 1 -#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000 +#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 #endif /* High Level Configuration Options */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 27e8d8edb0..102e4c96f2 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -41,6 +41,10 @@ #define CONFIG_P2020DS 1 #define CONFIG_MP 1 /* support multiple processors */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h index 6aa214a4b5..5f3c41475f 100644 --- a/include/configs/P3G4.h +++ b/include/configs/P3G4.h @@ -42,6 +42,8 @@ #define CONFIG_P3G4 1 /* this is a P3G4 board */ #define CONFIG_SYS_GT_6426x GT_64260 /* with a 64260 system controller */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BAUDRATE 115200 /* console baudrate = 115200 */ #undef CONFIG_ECC /* enable ECC support */ diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index 87703c98b3..5e7b81f0a2 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -36,4 +36,8 @@ #define CONFIG_SYS_P4080_ERRATUM_CPU22 #define CONFIG_SYS_P4080_ERRATUM_SERDES8 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + #include "corenet_ds.h" diff --git a/include/configs/PATI.h b/include/configs/PATI.h index 8d67ee7e8c..8a913f550d 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -33,6 +33,9 @@ #define CONFIG_MPC555 1 /* This is an MPC555 CPU */ #define CONFIG_PATI 1 /* ...On a PATI board */ + +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + /* Serial Console Configuration */ #define CONFIG_5xx_CONS_SCI1 #undef CONFIG_5xx_CONS_SCI2 diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 244d6fe502..bea7e49c5e 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -39,6 +39,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PCI405 1 /* ...on a PCI405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFD0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */ diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index 7587ecc8cd..f98295aa06 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -43,6 +43,8 @@ #define CONFIG_PCIPPC2 1 /* this is a PCIPPC2 board */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R 1 diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index 447321a84c..a33d946877 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -43,6 +43,8 @@ #define CONFIG_PCIPPC2 1 /* this is a PCIPPC2 board */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R 1 diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 2901cfd6d6..8d89c80908 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -35,6 +35,9 @@ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PIP405 1 /* ...on a PIP405 board */ + +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + /*********************************************************** * Clock ***********************************************************/ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index c7a0172ed2..7d91a75498 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PLU405 1 /* ...on a PLU405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 957bf22708..e1e709fe36 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -33,6 +33,8 @@ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_PM520 1 /* ... on PM520 board */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ #define CONFIG_MISC_INIT_R diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 6d24c26732..31874b12b6 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -39,6 +39,10 @@ #define CONFIG_PM826 1 /* ...on a PM8260 module */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFF000000 /* Standard: boot 64-bit flash */ +#endif + #undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 509c8b45da..8573ef92a4 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -39,6 +39,10 @@ #define CONFIG_PM828 1 /* ...on a PM828 module */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x40000000 /* Standard: boot 64-bit flash */ +#endif + #undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 1179a90828..8a0af47171 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -41,6 +41,8 @@ #define CONFIG_MPC8540 1 /* MPC8540 specific */ #define CONFIG_PM854 1 /* PM854 board specific */ +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 1934e3fe81..a6acc0b6b4 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -42,6 +42,8 @@ #define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_PM856 1 /* PM856 board specific */ +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index eb1a166f91..4d65df8f4c 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -32,6 +32,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PMC405 1 /* ...on a PMC405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 9cefaa15a5..74b656c761 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -28,6 +28,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PMC405DE 1 /* ...on a PMC405DE board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 4d3c0228ce..66e2692e53 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -39,6 +39,10 @@ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF90000 +#endif + #define CONFIG_SYS_CLK_FREQ 33333400 #if 0 /* temporary disabled because OS/9 does not like dcache on startup */ diff --git a/include/configs/PN62.h b/include/configs/PN62.h index ed026ddf37..b19beba8ad 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -39,6 +39,8 @@ #define CONFIG_MPC8240 1 #define CONFIG_PN62 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index f9b20143a0..e910f7d71b 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -75,6 +75,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */ + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/QS823.h b/include/configs/QS823.h index c1416cb91b..df9376c52f 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -53,6 +53,8 @@ #define CONFIG_QS823 1 /* ...on a QS823 module */ #define CONFIG_SCC2_ENET 1 /* SCC2 10BaseT ethernet */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + /* Select the target clock speed */ #undef CONFIG_CLOCK_16MHZ /* cpu=16,777,216 Hz, mem=16Mhz */ #undef CONFIG_CLOCK_33MHZ /* cpu=33,554,432 Hz, mem=33Mhz */ diff --git a/include/configs/QS850.h b/include/configs/QS850.h index de74fee768..45b8325f90 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -53,6 +53,8 @@ #define CONFIG_QS850 1 /* ...on a QS850 module */ #define CONFIG_SCC2_ENET 1 /* SCC2 10BaseT ethernet */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + /* Select the target clock speed */ #undef CONFIG_CLOCK_16MHZ /* cpu=16,777,216 Hz, mem=16Mhz */ #undef CONFIG_CLOCK_33MHZ /* cpu=33,554,432 Hz, mem=33Mhz */ diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index 705d37524d..48a20dfb3c 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -54,6 +54,9 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_QS860T 1 /* ...on a QS860T module */ +/* Start address of 512K Socketed Flash */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_FEC_ENET 1 /* FEC 10/100BaseT ethernet */ #define CONFIG_MII #define FEC_INTERRUPT SIU_LEVEL1 diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index 830f4bc59b..586f1bb491 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -36,6 +36,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_R360MPI 1 +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_LCD #undef CONFIG_EDT32F10 #define CONFIG_SHARP_LQ057Q3DC02 diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 00ac6cf1f3..471f32eaf3 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -39,6 +39,7 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_RBC823 1 /* ...on a RBC823 module */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 #if 0 #define DEBUG 1 diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index bec52780e6..37414a8243 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -42,6 +42,8 @@ #define CONFIG_MPC860 1 #define CONFIG_RPXCLASSIC 1 +#define CONFIG_SYS_TEXT_BASE 0xff000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index c9dd104ada..b5647968ed 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -39,6 +39,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_RPXLITE 1 +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index a59053c0eb..6577a26051 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -51,6 +51,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823e CPU. */ #define CONFIG_RPXLITE 1 /* RPXlite DW version board */ +#define CONFIG_SYS_TEXT_BASE 0xff000000 + #ifdef CONFIG_LCD /* with LCD controller ? */ #define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/ #endif diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index ec891e4ca3..f4f90f2043 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -1,6 +1,7 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_TEXT_BASE 0x80F00000 /***************************************************************************** * diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 6ec5be01c7..6e30335882 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -36,6 +36,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_RRVISION 1 /* ...on a RRvision board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_GCLK_FREQ 64000000 #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index 587b42e4bc..8140ae9744 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -33,6 +33,8 @@ #define CPU_ID_STR "MPC8250" #endif /* CONFIG_MPC8248 */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_RATTLER /* Analogue&Micro Rattler board */ diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index b753f267f9..9cc87dd5cf 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -48,6 +48,8 @@ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ +#define CONFIG_SYS_TEXT_BASE 0xfffc0000 + #define CONFIG_CPM2 1 /* has CPM2 */ diff --git a/include/configs/SCM.h b/include/configs/SCM.h index a114f6c5f4..6f8c28e9d7 100644 --- a/include/configs/SCM.h +++ b/include/configs/SCM.h @@ -38,6 +38,8 @@ #define CONFIG_SCM 1 /* ...on a System Controller Module */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #if (CONFIG_TQM8260 <= 100) # error "TQM8260 module revison not supported" #endif diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 6c57f95ba0..b4fbae4c36 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -36,6 +36,10 @@ #define CONFIG_MPC831x 1 #define CONFIG_MPC8313 1 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x00100000 +#endif + #define CONFIG_PCI #define CONFIG_FSL_ELBC 1 diff --git a/include/configs/SM850.h b/include/configs/SM850.h index 56f03e2b88..b5fe1cdacb 100644 --- a/include/configs/SM850.h +++ b/include/configs/SM850.h @@ -38,6 +38,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_SM850 1 /*...on a MPC850 Service Module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index fa77882cfd..5de4dd2e05 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -36,6 +36,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_SPD823TS 1 /* ...on a SPD823TS board */ +#define CONFIG_SYS_TEXT_BASE 0xFF000000 + #define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index 8ee8cbf0b5..f3991532e6 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -64,6 +64,8 @@ #define CONFIG_MPC860T 1 #define CONFIG_MPC855T 1 +#define CONFIG_SYS_TEXT_BASE 0xF8000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_SCC1 diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index 514bf89dac..20fb96ab2b 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -39,6 +39,8 @@ #define CONFIG_MPC8240 1 #define CONFIG_SANDPOINT 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #if 0 #define USE_DINK32 1 #else diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index 0381252af2..525e9fec59 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -39,6 +39,8 @@ #define CONFIG_MPC8245 1 #define CONFIG_SANDPOINT 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #if 0 #define USE_DINK32 1 #else diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index b675a21cf7..fcadd4a9c7 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -37,6 +37,17 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #define CONFIG_TB5200 1 /* ... on a TB5200 base board */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFC000000 boot low (standard configuration with room for + * max 64 MByte Flash ROM) + * 0xFFF00000 boot high (for a backup copy of U-Boot) + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFC000000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h index 7cefa32d7a..0d916f538d 100644 --- a/include/configs/TK885D.h +++ b/include/configs/TK885D.h @@ -40,6 +40,8 @@ #define CONFIG_TQM885D 1 /* ...on a TQM88D module */ #define CONFIG_TK885D 1 /* ...in a TK885D base board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */ #define CONFIG_SYS_8xx_CPUCLK_MIN 15000000 /* 15 MHz - CPU minimum clock */ #define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 /* 133 MHz - CPU maximum clock */ diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index f9d1446604..2654a447ed 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -45,6 +45,14 @@ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ #define CONFIG_TOP5200 1 /* ... on TOP5200 board - we need this for FEC.C */ +/* + * allowed and functional CONFIG_SYS_TEXT_BASE values: + * 0xff000000 low boot at 0x00000100 (default board setting) + * 0xfff00000 high boot at 0xfff00100 (board needs modification) + * 0x00100000 RAM load and test + */ +#define CONFIG_SYS_TEXT_BASE 0xff000000 + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 4bbd42aff4..8bc87e3ab4 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -53,6 +53,9 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_MPC860T 1 /* even better... an FEC! */ #define CONFIG_TOP860 1 /* ...on a TOP860 module */ + +#define CONFIG_SYS_TEXT_BASE 0x80000000 + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_IDENT_STRING " EMK TOP860" diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index a4c74615e3..f9d1110ecd 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,6 +37,17 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFC000000 boot low (standard configuration with room for + * max 64 MByte Flash ROM) + * 0xFFF00000 boot high (for a backup copy of U-Boot) + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFC000000 +#endif + /* On a Cameron or on a FO300 board or ... */ #if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 372c76dcc8..c2753a692d 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -36,6 +36,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_TQM823L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #ifdef CONFIG_LCD /* with LCD controller ? */ #define CONFIG_LCD_LOGO 1 /* print our logo on the LCD */ #define CONFIG_LCD_INFO 1 /* ... and some board info */ diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 64c97071d6..028cff7b44 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -36,6 +36,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_TQM823M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #ifdef CONFIG_LCD /* with LCD controller ? */ /* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display */ #endif diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index de5a86eb0c..5cbab9bf1a 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -44,6 +44,8 @@ * (easy to change) */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #if 0 diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index e9251ddd0d..a8a9ddfd9e 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -37,6 +37,8 @@ #define CONFIG_MPC8272_FAMILY 1 #define CONFIG_TQM8272 1 +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_GET_CPU_STR_F 1 /* Get the CPU ID STR */ #define CONFIG_BOARD_GET_CPU_CLK_F 1 /* Get the CLKIN from board fct */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 35af262427..a34e4427bc 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -37,6 +37,8 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_TQM834X 1 /* TQM834X board specific */ +#define CONFIG_SYS_TEXT_BASE 0x80000000 + /* IMMR Base Addres Register, use Freescale default: 0xff400000 */ #define CONFIG_SYS_IMMR 0xff400000 diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index bf6ecce470..2e091f8d2d 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -36,6 +36,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_TQM850L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 74424527b8..2c988c3e7d 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -36,6 +36,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_TQM850M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 5bf8f0239d..f4ab9892ed 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -36,6 +36,8 @@ #define CONFIG_MPC855 1 /* This is a MPC855 CPU */ #define CONFIG_TQM855L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 456ed7e473..c92a6aced8 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -36,6 +36,8 @@ #define CONFIG_MPC855 1 /* This is a MPC855 CPU */ #define CONFIG_TQM855M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 2ff3ddc0bd..d95f75d578 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -41,6 +41,12 @@ #define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ +#if defined(CONFIG_TQM8548_BE) +#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#else +#define CONFIG_SYS_TEXT_BASE 0xfffc0000 +#endif + #if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE) #define CONFIG_TQM8548 #endif diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 94b9a3b1eb..ff629cf1b0 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -36,6 +36,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_TQM860L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index ce5e6917c7..aa682f3fbc 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -36,6 +36,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_TQM860M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index d77df9cad2..f36ef190ab 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -39,6 +39,8 @@ #define CONFIG_TQM862L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index a6c465b318..fb8f538719 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -39,6 +39,8 @@ #define CONFIG_TQM862M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 9ec815c600..f92bab0555 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -36,6 +36,8 @@ #define CONFIG_MPC866 1 /* This is a MPC866 CPU */ #define CONFIG_TQM866M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */ #define CONFIG_SYS_8xx_CPUCLK_MIN 15000000 /* 15 MHz - CPU minimum clock */ #define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 /* 133 MHz - CPU maximum clock */ diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index c715c0783e..7418512a15 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -39,6 +39,8 @@ #define CONFIG_MPC885 1 /* This is a MPC885 CPU */ #define CONFIG_TQM885D 1 /* ...on a TQM88D module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */ #define CONFIG_SYS_8xx_CPUCLK_MIN 15000000 /* 15 MHz - CPU minimum clock */ #define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 /* 133 MHz - CPU maximum clock */ diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index de11d86fe3..be0a9f806c 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -44,6 +44,16 @@ #define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ #define CONFIG_TOTAL5200 1 /* ... on Total5200 board */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFFF00000 boot high (standard configuration) + * 0xFE000000 boot low + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 0117cc0728..8dbee86794 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_VOH405 1 /* ...on a VOH405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index 76016ac82f..63e6ca8139 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -35,6 +35,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_VOM405 1 /* ...on a VOM405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC8000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index 8f8b55ed2e..805764aa93 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -29,6 +29,8 @@ /* define busmode: 8260 */ #undef CONFIG_BUSMODE_60x +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + /* system clock rate (CLKIN) - equal to the 60x and local bus speed */ #ifdef CONFIG_CLKIN_66MHz #define CONFIG_8260_CLKIN 66666666 /* in Hz */ diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 0fbe80ce8c..fce7f2814f 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -38,6 +38,8 @@ #define CONFIG_W7O 1 /* ...on a Wave 7 Optics board */ #define CONFIG_W7OLMC 1 /* ...specifically an LMC */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_F 1 /* and misc_init_f() */ #define CONFIG_MISC_INIT_R 1 /* and misc_init_r() */ diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index f12fa55d2a..0144fbde34 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -38,6 +38,8 @@ #define CONFIG_W7O 1 /* ...on a Wave 7 Optics board */ #define CONFIG_W7OLMG 1 /* ...specifically an LMG */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_F 1 /* and misc_init_f() */ #define CONFIG_MISC_INIT_R 1 /* and misc_init_r() */ diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index 34a5fff138..3ca19fcfb4 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -38,6 +38,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_WUH405 1 /* ...on a WUH405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/XPEDITE1000.h b/include/configs/XPEDITE1000.h index c378542c39..b2399c6cce 100644 --- a/include/configs/XPEDITE1000.h +++ b/include/configs/XPEDITE1000.h @@ -39,6 +39,8 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + /* * DDR config */ diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index 729a48597b..31ca59dfd9 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -40,6 +40,8 @@ #define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ #define CONFIG_ALTIVEC 1 +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index 7ff440e247..1f27c5ef22 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -38,6 +38,10 @@ #define CONFIG_SYS_BOARD_NAME "XPedite5200" #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#endif + #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 634ba74d8f..24ee65ed61 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -38,6 +38,10 @@ #define CONFIG_SYS_BOARD_NAME "XPedite5370" #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#endif + #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h index 273b4e240e..398a70d6ad 100644 --- a/include/configs/Yukon8220.h +++ b/include/configs/Yukon8220.h @@ -31,6 +31,8 @@ #define CONFIG_MPC8220 1 #define CONFIG_YUKON8220 1 /* ... on Yukon board */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index d0dc067c70..d305fa4a85 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -29,6 +29,9 @@ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */ + +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CPU_ID_STR "MPC8265" #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h index fcc47a99ec..b161dde2aa 100644 --- a/include/configs/ZUMA.h +++ b/include/configs/ZUMA.h @@ -41,6 +41,8 @@ #define CONFIG_EVB64260 1 /* this is an EVB64260 board */ #define CONFIG_ZUMA_V2 1 /* always define this for ZUMA v2 */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + /* #define CONFIG_ZUMA_V2_OLD 1 */ /* backwards compat for old V2 board */ #define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */ diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 39f85ae3b6..c1bd4be944 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -35,6 +35,10 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EZ 1 /* Specifc 405EZ support*/ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 +#endif + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/aev.h b/include/configs/aev.h index 15a242cc17..187e5c1987 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -41,6 +41,17 @@ #define CONFIG_AEVFIFO 1 #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFC000000 boot low (standard configuration with room for + * max 64 MByte Flash ROM) + * 0xFFF00000 boot high (for a backup copy of U-Boot) + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFC000000 +#endif + #define CONFIG_HIGH_BATS 1 /* High BATs supported */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 70382914b8..74a078146a 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -33,6 +33,9 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ + +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ #define CONFIG_4xx_DCACHE /* Enable i- and d-cache */ diff --git a/include/configs/aria.h b/include/configs/aria.h index cb2c726391..3f1e7f7ffd 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -51,6 +51,8 @@ #define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ #define CONFIG_FSL_DIU_LOGO_BMP 1 /* Don't include FSL DIU binary bmp */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + /* video */ #undef CONFIG_VIDEO diff --git a/include/configs/atc.h b/include/configs/atc.h index 6f4fa2bf29..8ec8c79523 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -37,6 +37,8 @@ #define CONFIG_ATC 1 /* ...on a ATC board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#define CONFIG_SYS_TEXT_BASE 0xFF000000 + /* * select serial console configuration * diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 18276c5886..1bdfd9da2f 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -36,6 +36,10 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 +#endif + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/barco.h b/include/configs/barco.h index eef711a270..9073b2f863 100644 --- a/include/configs/barco.h +++ b/include/configs/barco.h @@ -62,6 +62,8 @@ #define CONFIG_MPC8245 1 #define CONFIG_BARCOBCD_STREAMING 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #undef USE_DINK32 #define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */ diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h index 560c64ff44..0bb97d9ea4 100644 --- a/include/configs/bluestone.h +++ b/include/configs/bluestone.h @@ -31,6 +31,11 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 +#endif + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 3e64492cd0..7262b3e8a0 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_BUBINGA 1 /* ...on a BUBINGA board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h index 4508d757ac..15d79c4cae 100644 --- a/include/configs/c2mon.h +++ b/include/configs/c2mon.h @@ -36,6 +36,8 @@ #define CONFIG_MPC855 1 /* This is a MPC855 CPU */ #define CONFIG_C2MON 1 /* ...on a C2MON module */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_80MHz 1 /* Running at 5 * 16 = 80 MHz */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ diff --git a/include/configs/canmb.h b/include/configs/canmb.h index 46d966d00e..0f2f386156 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -33,6 +33,13 @@ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ #define CONFIG_CANMB 1 /* ... on canmb board - we need this for FEC.C */ +/* + * allowed and functional CONFIG_SYS_TEXT_BASE values: + * 0xfe000000 low boot at 0x00000100 (default board setting) + * 0x00100000 RAM load and test + */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index 51087f7371..fcc7d0e3ed 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -48,6 +48,10 @@ #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 +#endif + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 289335180f..84311e3f7d 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -31,6 +31,8 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_CM5200 1 /* ... on CM5200 platform */ +#define CONFIG_SYS_TEXT_BASE 0xfc000000 + #define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index ae3e15cb66..72fdb6bdbe 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -38,6 +38,8 @@ #define CONFIG_MPC555 1 /* This is an MPC555 CPU */ #define CONFIG_CMI 1 /* Using the customized cmi board */ +#define CONFIG_SYS_TEXT_BASE 0x02000000 /* Boot from flash at location 0x00000000 */ + /* Serial Console Configuration */ #define CONFIG_5xx_CONS_SCI1 #undef CONFIG_5xx_CONS_SCI2 diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index 872333f711..444fce6831 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -37,6 +37,8 @@ #define CONFIG_COGENT 1 /* using Cogent Modular Architecture */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ #define CONFIG_MISC_INIT_R /* Use misc_init_r() */ diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h index 329bc9930a..a23db1c0b7 100644 --- a/include/configs/cogent_mpc8xx.h +++ b/include/configs/cogent_mpc8xx.h @@ -36,6 +36,8 @@ #define CONFIG_MPC860 1 /* This is an MPC860 CPU */ #define CONFIG_COGENT 1 /* using Cogent Modular Architecture */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ #define CONFIG_MISC_INIT_R /* Use misc_init_r() */ diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index 712db6d507..2bedae2744 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -45,6 +45,10 @@ #define CONFIG_CPCI5200 1 /* ... on CPCI5200 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */ +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 2aca605185..24367bae6d 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -40,6 +40,8 @@ #define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + /* * OS Bootstrap configuration * diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 3450e24601..ad8811f6c4 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -40,6 +40,8 @@ #define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */ #define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + /* * OS Bootstrap configuration * diff --git a/include/configs/debris.h b/include/configs/debris.h index 33b2120c1d..42b8c342de 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -30,6 +30,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + /* Environments */ /* bootargs */ diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index 0b366f4dfd..3368b2d263 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -40,6 +40,16 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFFF00000 boot high (standard configuration) + * 0xFE000000 boot low + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */ +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 #define BOOTFLAG_COLD 0x01 diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 21d2d284a6..0d44eda867 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -28,6 +28,8 @@ #define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_DLVISION 1 /* on a Neo board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index 6a71cfac5b..bacdbf0e5d 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -40,6 +40,8 @@ #define CONFIG_MPC8245 1 #define CONFIG_EXALION 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #if defined (CONFIG_MPC8240) /* #warning ---------- eXalion with MPC8240 --------------- */ #elif defined (CONFIG_MPC8245) diff --git a/include/configs/ebony.h b/include/configs/ebony.h index 8c3284a94d..a0d3869660 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -37,6 +37,8 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h index 8c042f8413..1576533304 100644 --- a/include/configs/ep8248.h +++ b/include/configs/ep8248.h @@ -31,6 +31,8 @@ #define CONFIG_EP8248 /* Embedded Planet EP8248 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 482b348939..ab646ae348 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -48,6 +48,8 @@ #define CONFIG_SYS_EP8260_H2 1 /* #undef CONFIG_SYS_EP8260_H2 */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_CPM2 1 /* Has a CPM2 */ /* What is the oscillator's (UX2) frequency in Hz? */ diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index afa35a3065..90407a85c0 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -31,6 +31,8 @@ #define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */ /* 256MB SDRAM / 64MB FLASH */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index 7bf6de2536..f6585d03f1 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -46,6 +46,20 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ /* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFFF00000 boot high (standard configuration) + * 0xFE000000 boot low + * 0x00100000 boot from RAM (for testing only) does not work + */ +#ifdef CONFIG_galaxy5200_LOWBOOT +#define CONFIG_SYS_TEXT_BASE 0xFE000000 +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */ +#endif + +/* * Serial console configuration */ #define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 -> */ diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index d6db7bf494..282afbcc61 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -40,6 +40,8 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index cb3dd9ac07..9e7646703b 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -50,6 +50,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_TEXT_BASE 0x40000000 + /* Enable debug prints */ #undef DEBUG_BOOTP_EXT /* Debug received vendor fields */ diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h index 394a45fe43..dd5e5a20c6 100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 #define CONFIG_HOSTNAME hcu4 +#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 + /* * Include common defines/options for all boards produced by Netstal Maschinen */ diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index a4633e139e..a2edf51e20 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -41,6 +41,8 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_HOSTNAME hcu5 +#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 + /* * Include common defines/options for all boards produced by Netstal Maschinen */ diff --git a/include/configs/hermes.h b/include/configs/hermes.h index 0df46fa4de..0c46398ef9 100644 --- a/include/configs/hermes.h +++ b/include/configs/hermes.h @@ -36,6 +36,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860T CPU */ #define CONFIG_HERMES 1 /* ...on a HERMES-PRO board */ +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 5d99121a39..edb9a3a4ab 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -33,6 +33,10 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_HMI1001 1 /* HMI1001 board */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 6efa9d2014..406f35c771 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -37,6 +37,8 @@ #define CONFIG_HYMOD 1 /* ...on a Hymod board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ #define CONFIG_BOARD_POSTCLK_INIT /* have board_postclk_init() function */ diff --git a/include/configs/icon.h b/include/configs/icon.h index ad0ca5d37c..8d98d57f88 100644 --- a/include/configs/icon.h +++ b/include/configs/icon.h @@ -35,6 +35,9 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_440SPE 1 /* Specifc SPe support */ + +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 + #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ #define CONFIG_SYS_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 0f95445777..f77961228c 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -36,6 +36,15 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_INKA4X0 1 /* INKA4x0 board */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFFE00000 boot low + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFE00000 /* Standard: boot low */ +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/intip.h b/include/configs/intip.h index 82c828284a..56d2be2afe 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -45,6 +45,10 @@ #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 +#endif + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index b515aed356..05f66daf87 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -37,6 +37,8 @@ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ #define CONFIG_IPEK01 /* Motherboard is ipek01 */ +#define CONFIG_SYS_TEXT_BASE 0xfc000000 + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ #define CONFIG_MISC_INIT_R diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 082deed6a5..4b3b0085c9 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -33,6 +33,15 @@ #define CONFIG_MPC5200 1 /* especially an MPC5200 */ #define CONFIG_JUPITER 1 /* ... on Jupiter board */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFFF00000 boot high (standard configuration) + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define CONFIG_BOARD_EARLY_INIT_R 1 diff --git a/include/configs/katmai.h b/include/configs/katmai.h index e4ccd7dafe..135a4c26aa 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -41,6 +41,8 @@ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ #define CONFIG_SYS_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 + /* * Enable this board for more than 2GB of SDRAM */ diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 612a0fe9ff..e153b3120f 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -39,6 +39,10 @@ #define CONFIG_405EX 1 /* Specifc 405EX support*/ #define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 +#endif + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index ecb0228c70..9117842f42 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -30,6 +30,8 @@ #define CONFIG_KMETER1 1 /* KMETER1 board specific */ #define CONFIG_HOSTNAME kmeter1 +#define CONFIG_SYS_TEXT_BASE 0xF0000000 + /* include common defines/options for all Keymile boards */ #include "keymile-common.h" diff --git a/include/configs/kmsupx4.h b/include/configs/kmsupx4.h index 8f1e602a2e..228bdd7cf9 100644 --- a/include/configs/kmsupx4.h +++ b/include/configs/kmsupx4.h @@ -32,6 +32,8 @@ #define CONFIG_KMSUPX4 1 /* ...on a kmsupx4 board */ #define CONFIG_HOSTNAME kmsupx4 +#define CONFIG_SYS_TEXT_BASE 0xf0000000 + /* include common defines/options for all Keymile 8xx boards */ #include "km8xx.h" diff --git a/include/configs/korat.h b/include/configs/korat.h index 63cdd5d054..96a984d56e 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -38,6 +38,12 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 +#ifdef CONFIG_KORAT_PERMANENT +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 +#else +#define CONFIG_SYS_TEXT_BASE 0xF7F60000 +#endif + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index 7eabefa3a3..560cfb52e2 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -28,6 +28,8 @@ #define CONFIG_MPC8245 1 #define CONFIG_KVME080 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index 54c99ae14f..2918d790d6 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -20,6 +20,22 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * + * Standard configuration - all models + * 0xFFF00000 boot from flash + * + * Test configuration (boot from RAM using uloader.o) + * LinkStation HD-HLAN and KuroBox Standard + * 0x03F00000 boot from RAM + * LinkStation HD-HGLAN and KuroBox HG + * 0x07F00000 boot from RAM + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #if 0 #define DEBUG #endif diff --git a/include/configs/luan.h b/include/configs/luan.h index 6b1a41f8e0..d8014047b7 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -37,6 +37,8 @@ #define CONFIG_440 1 #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index be20d72909..3b7293a7ea 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -39,6 +39,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823E CPU */ #define CONFIG_LWMON 1 /* ...on a LWMON board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + /* Default Ethernet MAC address */ #define CONFIG_ETHADDR 00:11:B0:00:00:00 diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index b061dddf98..19d2989d4f 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -36,6 +36,11 @@ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 +#endif + #define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ #define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ diff --git a/include/configs/makalu.h b/include/configs/makalu.h index 80163d49ee..c4853ab9c2 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -39,6 +39,8 @@ #define CONFIG_405EX 1 /* Specifc 405EX support*/ #define CONFIG_SYS_CLK_FREQ 33330000 /* ext frequency to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 00097c99ae..72d9750528 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -33,6 +33,16 @@ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MCC200 1 /* ... on MCC200 board */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFC000000 boot low (standard configuration) + * 0xFFF00000 boot high + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFC000000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ #define CONFIG_MISC_INIT_R diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h index 0f6d161e39..4aef6fc962 100644 --- a/include/configs/mcu25.h +++ b/include/configs/mcu25.h @@ -37,6 +37,8 @@ #define CONFIG_4xx 1 #define CONFIG_HOSTNAME mcu25 +#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 + /* * Include common defines/options for all boards produced by Netstal Maschinen */ diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index fe32bb2cb8..43c0528637 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -48,6 +48,8 @@ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC512X 1 /* MPC512X family */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 5aef5b20c7..8edb84d8bc 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -45,6 +45,10 @@ #define CONFIG_MECP5200 1 /* ... on MECP5200 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index b35faae0e8..152c9a6acc 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -34,6 +34,8 @@ #define CONFIG_MGCOGE 1 #define CONFIG_HOSTNAME mgcoge +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + #define CONFIG_CPM2 1 /* Has a CPM2 */ /* include common defines/options for all Keymile boards */ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index 1618f7dce1..6036da8b5e 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -32,6 +32,8 @@ #define CONFIG_MGSUVD 1 /* ...on a mgsuvd board */ #define CONFIG_HOSTNAME mgsuvd +#define CONFIG_SYS_TEXT_BASE 0xf0000000 + /* include common defines/options for all Keymile 8xx boards */ #include "km8xx.h" diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 7a7d5b9b5c..af2f40aceb 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -37,6 +37,8 @@ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + /* * BOOTP options */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 07e7747dbe..f5c2bd3a57 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -48,6 +48,8 @@ #define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + /* video */ #undef CONFIG_VIDEO diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 8068b4051a..ae5e1098f6 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -42,6 +42,8 @@ #define CONFIG_HIGH_BATS /* High BATs supported */ #define CONFIG_ALTIVEC /* undef to disable */ +#define CONFIG_SYS_TEXT_BASE 0xFF000000 + #define CONFIG_SYS_BOARD_NAME "MPC7448 HPC II" #define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II" diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 33d184432d..18f205a58d 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -33,6 +33,10 @@ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308_P1M 1 /* mpc8308_p1m board specific */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFC000000 +#endif + /* * On-board devices * diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h index d01160da8e..e85b953755 100644 --- a/include/configs/muas3001.h +++ b/include/configs/muas3001.h @@ -33,6 +33,8 @@ #define CONFIG_MPC8260 1 #define CONFIG_MUAS3001 1 +#define CONFIG_SYS_TEXT_BASE 0xFF000000 + #define CONFIG_CPM2 1 /* Has a CPM2 */ /* Do boardspecific init */ diff --git a/include/configs/mucmc52.h b/include/configs/mucmc52.h index f87dc9c650..101788a678 100644 --- a/include/configs/mucmc52.h +++ b/include/configs/mucmc52.h @@ -35,6 +35,10 @@ #define CONFIG_MUCMC52 1 /* MUCMC52 board */ #define CONFIG_HOSTNAME mucmc52 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #include "manroland/common.h" #include "manroland/mpc5200-common.h" diff --git a/include/configs/munices.h b/include/configs/munices.h index 01756f5021..91163680e8 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -31,6 +31,11 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ #define CONFIG_MUNICES 1 /* ... on MUNICes board */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ diff --git a/include/configs/neo.h b/include/configs/neo.h index f8f53e8f37..1063d123d2 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -29,6 +29,8 @@ #define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_NEO 1 /* on a Neo board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index 9466dfa4fd..cca32e65f1 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -32,6 +32,8 @@ #define CONFIG_MPC5200 #define CONFIG_O2DNT 1 /* ... on O2DNT board */ +#define CONFIG_SYS_TEXT_BASE 0xFF000000 /* boot low for 16 MiB boards */ + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index d11d218c00..f33f0ff2c8 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -46,6 +46,8 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 17ec08fdd6..70c4b7d061 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -40,6 +40,8 @@ *----------------------------------------------------------------------*/ #define CONFIG_P3Mx /* used for both board versions */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #if defined (CONFIG_P3M750) #define CONFIG_750FX /* 750GL/GX/FX */ #define CONFIG_HIGH_BATS /* High BATs supported */ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 6edf91ecc6..4a2e420236 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -39,6 +39,9 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ /*----------------------------------------------------------------------- diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 3443e86eff..c663b544d1 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -41,6 +41,17 @@ High Level Configuration Options #define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ #define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */ /* FEC configuration and IDE */ + +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFFF00000 boot high (standard configuration) + * 0xFF000000 boot low + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 85152d12a3..9f048512fa 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -40,6 +40,9 @@ #define CONFIG_440EP 1 /* Specific PPC440EP support */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ + +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 + #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index ba7f9ca759..c6d87e3cfe 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -49,6 +49,8 @@ #define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ +#define CONFIG_SYS_TEXT_BASE 0xF0000000 + /* Used for silent command in environment */ #define CONFIG_SYS_DEVICE_NULLDEV #define CONFIG_SILENT_CONSOLE diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 8c8e0ab5b2..ad983e478b 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -44,6 +44,10 @@ #define CONFIG_PF5200 1 /* ... on PF5200 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 8e807f59df..09bf4e48ff 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -49,6 +49,7 @@ #undef CONFIG_ALTIVEC #define CONFIG_BUS_CLK 66000000 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* * Monitor configuration diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 7db749896b..8ceb9bf38b 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -34,6 +34,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_TEXT_BASE 0xfe000000 + /***************************************************************************** * * These settings must match the way _your_ board is set up diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index 83d1733f7f..f847f9cb33 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -34,6 +34,8 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EP 1 /* Specifc 405EP support*/ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ diff --git a/include/configs/quantum.h b/include/configs/quantum.h index e440e93a5a..a38145b421 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -39,6 +39,8 @@ #define CONFIG_RPXLITE 1 /* QUANTUM is the RPXlite clone */ #define CONFIG_RMU 1 /* The QUNATUM is based on our RMU */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/redwood.h b/include/configs/redwood.h index 3c1e882b06..a7d5dac9af 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -33,6 +33,8 @@ #define CONFIG_460SX 1 /* ... PPC460 family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_SYS_TEXT_BASE 0xfffb0000 + /*----------------------------------------------------------------------- * Include common defines/options for all AMCC boards *----------------------------------------------------------------------*/ diff --git a/include/configs/rmu.h b/include/configs/rmu.h index fefb17fde7..66f46b9460 100644 --- a/include/configs/rmu.h +++ b/include/configs/rmu.h @@ -39,6 +39,8 @@ #define CONFIG_RPXLITE 1 /* RMU is the RPXlite clone */ #define CONFIG_RMU 1 +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 8207844960..6b41b12ddb 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -39,6 +39,8 @@ #define CONFIG_RSD_PROTO 1 /* on a R&S Protocol Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ +#define CONFIG_SYS_TEXT_BASE 0xff000000 + #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ /* diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 9b39e1594b..f6049c4a39 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -35,6 +35,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #undef DEBUG_BOOTP_EXT /* Debug received vendor fields */ #undef CONFIG_LOGBUFFER /* External logbuffer support */ diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 187002c107..346c8479e9 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -36,6 +36,8 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_SBC405 1 /* ...on a WR SBC405 board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h index b00667f6f3..ea9304311b 100644 --- a/include/configs/sbc8240.h +++ b/include/configs/sbc8240.h @@ -43,6 +43,8 @@ #define CONFIG_MPC8240 1 #define CONFIG_WRSBC8240 1 +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 16dc4bb735..bfa0389fda 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -35,6 +35,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_TEXT_BASE 0x40000000 + /* Enable debug prints */ #undef DEBUG_BOOTP_EXT /* Debug received vendor fields */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 5ef32d8178..eecb9e61d5 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -32,17 +32,6 @@ #define __CONFIG_H /* - * Top level Makefile configuration choices - */ -#ifdef CONFIG_66 -#define PCI_66M -#endif - -#ifdef CONFIG_33 -#define PCI_33M -#endif - -/* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ @@ -51,6 +40,8 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_SBC8349 1 /* WRS SBC8349 board specific */ +#define CONFIG_SYS_TEXT_BASE 0xFF800000 + /* Don't enable PCI2 on sbc834x - it doesn't exist physically. */ #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ @@ -60,14 +51,14 @@ * physically empty. The board will automatically (i.e w/o jumpers) * clock down to 33MHz if you insert a 33MHz PCI card. */ -#ifdef PCI_33M +#ifdef CONFIG_PCI_33M #define CONFIG_83XX_CLKIN 33000000 /* in Hz */ #else /* 66M */ #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ #endif #ifndef CONFIG_SYS_CLK_FREQ -#ifdef PCI_33M +#ifdef CONFIG_PCI_33M #define CONFIG_SYS_CLK_FREQ 33000000 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 #else /* 66M */ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 3624d37905..0cfd058a61 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -57,6 +57,10 @@ #define CONFIG_MPC8548 1 /* MPC8548 specific */ #define CONFIG_SBC8548 1 /* SBC8548 board specific */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfffa0000 +#endif + #undef CONFIG_RIO #ifdef CONFIG_PCI diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 0d0fbdd607..a75e4be212 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -46,6 +46,8 @@ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ +#define CONFIG_SYS_TEXT_BASE 0xfffc0000 + #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_SBC8560 1 /* configuration for SBC8560 board */ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 32c8c1830d..bc9a56a82a 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -43,6 +43,8 @@ #define CONFIG_MP 1 /* support multiple processors */ #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #ifdef RUN_DIAG #define CONFIG_SYS_DIAG_ADDR 0xff800000 #endif diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 4a854a979a..e71f1ace58 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -62,6 +62,8 @@ #define CONFIG_4xx 1 #define CONFIG_405GP 1 +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index cfda9576fe..412deeadb6 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -42,6 +42,10 @@ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 +#endif + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 8cf3974fd2..c2f00f2ddd 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -45,6 +45,8 @@ #define CONFIG_MPC8544 1 #define CONFIG_SOCRATES 1 +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index 6792ba45d9..d22d1c8f0a 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -31,6 +31,8 @@ #define CONFIG_MPC8220 1 #define CONFIG_SORCERY 1 /* Sorcery board */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + #define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index f81165bb79..75ed618aaa 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -26,6 +26,8 @@ #define CONFIG_SPC1920 1 /* SPC1920 board */ #define CONFIG_MPC885 1 /* MPC885 CPU */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_8xx_CONS_SMC1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index abc48b32b3..5e71d74359 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -43,6 +43,8 @@ #define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/ #define CONFIG_MPC8560 1 +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + #undef CONFIG_PCI /* pci ethernet support */ #define CONFIG_TSEC_ENET /* tsec ethernet support*/ #undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 2a4758eeca..e4493a99d8 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -43,6 +43,8 @@ #define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/ #define CONFIG_MPC8560 1 +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_PCI /* PCI ethernet support */ #define CONFIG_TSEC_ENET /* tsec ethernet support*/ #undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 585436604f..426aa496fd 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -38,6 +38,8 @@ #define CONFIG_MPC875 1 /* This is a MPC875 CPU */ #define CONFIG_STXXTC 1 /* ...on a STx XTc board */ +#define CONFIG_SYS_TEXT_BASE 0x40F00000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 425f472a7f..d7f4d80def 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -31,6 +31,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_TEXT_BASE 0x40000000 + /* Custom configuration */ /* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */ /* SC85T,SC860T, FEL8xx-AT(855T/860T) */ diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 39ca7930ba..d00e64eff2 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -31,6 +31,10 @@ #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 +#endif + #define CONFIG_HOSTNAME t3corp /* diff --git a/include/configs/taihu.h b/include/configs/taihu.h index 7e660eea02..6e9dbc5759 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -32,6 +32,8 @@ #define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_TAIHU 1 /* on a taihu board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/taishan.h b/include/configs/taishan.h index faf9e20bd8..12f35ae1f4 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -34,6 +34,8 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/uc100.h b/include/configs/uc100.h index 23f4c825b7..f1c09f36bf 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -40,6 +40,8 @@ #define CONFIG_UC100 1 /* ...on a UC100 module */ +#define CONFIG_SYS_TEXT_BASE 0x40700000 + #define MPC8XX_FACT 4 /* Multiply by 4 */ #define MPC8XX_XIN 25000000 /* 25.0 MHz in */ #define CONFIG_8xx_GCLK_FREQ (MPC8XX_FACT * MPC8XX_XIN) diff --git a/include/configs/uc101.h b/include/configs/uc101.h index 19722615a6..483534c41c 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -32,6 +32,10 @@ #define CONFIG_UC101 1 /* UC101 board */ #define CONFIG_HOSTNAME uc101 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + #include "manroland/common.h" #include "manroland/mpc5200-common.h" diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 6a0c68de4c..cc6a6c9bfa 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -49,6 +49,9 @@ #define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_UTX8245 1 + +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define DEBUG 1 #define CONFIG_IDENT_STRING " [UTX5] " diff --git a/include/configs/v37.h b/include/configs/v37.h index 7f1670eafe..ab9b22d448 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -36,6 +36,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_V37 1 /* ...on a Marel V37 board */ +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_LCD #define CONFIG_SHARP_LQ084V1DG21 #undef CONFIG_LCD_LOGO diff --git a/include/configs/v38b.h b/include/configs/v38b.h index e2db0b046a..26ebabae9a 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -29,6 +29,9 @@ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_V38B 1 /* ...on V38B board */ + +#define CONFIG_SYS_TEXT_BASE 0xFF000000 + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */ #define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 016143c45c..d8541803f8 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -38,6 +38,10 @@ #define CONFIG_MPC8313 1 #define CONFIG_VE8313 1 +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfe000000 +#endif + #define CONFIG_PCI 1 #define CONFIG_FSL_ELBC 1 diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 7046e6739d..619c430869 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -37,6 +37,8 @@ #define CONFIG_VIRTLAB2 1 /* ...on a virtlab2 module */ #define CONFIG_TQM8xxL 1 +#define CONFIG_SYS_TEXT_BASE 0x40000000 + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_SYS_SMC_RXBUFLEN 128 #define CONFIG_SYS_MAXIDLE 10 diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index aefe0e5dbc..ab46ff884a 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -2,7 +2,7 @@ * esd vme8349 U-Boot configuration file * Copyright (c) 2008, 2009 esd gmbh Hannover Germany * - * (C) Copyright 2006 + * (C) Copyright 2006-2010 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * reinhard.arlt@esd-electronics.de @@ -37,7 +37,7 @@ /* * Top level Makefile configuration choices */ -#ifdef CONFIG_caddy2 +#ifdef CONFIG_CADDY2 #define VME_CADDY2 #endif @@ -50,21 +50,23 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_VME8349 1 /* ESD VME8349 board specific */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define CONFIG_MISC_INIT_R #define CONFIG_PCI /* Don't enable PCI2 on vme834x - it doesn't exist physically. */ #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ -#define PCI_66M -#ifdef PCI_66M +#define CONFIG_PCI_66M +#ifdef CONFIG_PCI_66M #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ #else #define CONFIG_83XX_CLKIN 33000000 /* in Hz */ #endif #ifndef CONFIG_SYS_CLK_FREQ -#ifdef PCI_66M +#ifdef CONFIG_PCI_66M #define CONFIG_SYS_CLK_FREQ 66000000 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 #else diff --git a/include/configs/walnut.h b/include/configs/walnut.h index 3be489da5f..72ac4e33c2 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -36,7 +36,9 @@ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_WALNUT 1 /* ...on a WALNUT board */ - /* ...and on a SYCAMORE board */ + /* ...or on a SYCAMORE board */ + +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 /* * Include common defines/options for all AMCC eval boards diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index ed0560ad97..0d450f50d4 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -42,6 +42,8 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 4e64eec592..8d5d45fbc8 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -45,6 +45,8 @@ #define EXTCLK_50 50000000 #define EXTCLK_83 83333333 +#define CONFIG_SYS_TEXT_BASE 0xfffb0000 + /* * Include common defines/options for all AMCC eval boards */ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 06d4526b07..6136af1fb2 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -34,6 +34,8 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EP 1 /* Specifc 405EP support*/ +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ |