diff options
| author | Vignesh R <vigneshr@ti.com> | 2016-07-06 07:50:56 +0300 |
|---|---|---|
| committer | Jagan Teki <jteki@openedev.com> | 2016-07-09 17:46:33 +0300 |
| commit | 2372e14f1937fceea54d698342e5a4240b58a893 (patch) | |
| tree | ff5362dd329b3f2e970bc77368641fd9a9f49fde /drivers/spi/cadence_qspi.c | |
| parent | dac3bf20fb2c9b03476be0d73db620f62ab3cee1 (diff) | |
| download | u-boot-2372e14f1937fceea54d698342e5a4240b58a893.tar.xz | |
spi: cadence_quadspi: Enable QUAD mode based on DT data
Instead of relying on CONFIG_SPI_FLASH_QUAD to be defined to enable QUAD
mode, make use of mode_rx field of dm_spi_slave_platdata to determine
whether to enable or disable QUAD mode. This is necessary to support
muliple SPI controllers where one of them may not support QUAD mode.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Diffstat (limited to 'drivers/spi/cadence_qspi.c')
| -rw-r--r-- | drivers/spi/cadence_qspi.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c index 4f7fd52532..a5244fff4d 100644 --- a/drivers/spi/cadence_qspi.c +++ b/drivers/spi/cadence_qspi.c @@ -191,6 +191,7 @@ static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen, struct udevice *bus = dev->parent; struct cadence_spi_platdata *plat = bus->platdata; struct cadence_spi_priv *priv = dev_get_priv(bus); + struct dm_spi_slave_platdata *dm_plat = dev_get_parent_platdata(dev); void *base = priv->regbase; u8 *cmd_buf = priv->cmd_buf; size_t data_bytes; @@ -250,7 +251,7 @@ static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen, break; case CQSPI_INDIRECT_READ: err = cadence_qspi_apb_indirect_read_setup(plat, - priv->cmd_len, cmd_buf); + priv->cmd_len, dm_plat->mode_rx, cmd_buf); if (!err) { err = cadence_qspi_apb_indirect_read_execute (plat, data_bytes, din); |