path: root/tools/testing/selftests/net/forwarding/lib.sh

#!/bin/bash
# SPDX-License-Identifier: GPL-2.0

##############################################################################
# Defines

# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4

# Can be overridden by the configuration file.
PING=${PING:=ping}
PING6=${PING6:=ping6}
MZ=${MZ:=mausezahn}
ARPING=${ARPING:=arping}
TEAMD=${TEAMD:=teamd}
WAIT_TIME=${WAIT_TIME:=5}
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
NETIF_TYPE=${NETIF_TYPE:=veth}
NETIF_CREATE=${NETIF_CREATE:=yes}
MCD=${MCD:=smcrouted}
MC_CLI=${MC_CLI:=smcroutectl}
PING_COUNT=${PING_COUNT:=10}
PING_TIMEOUT=${PING_TIMEOUT:=5}
WAIT_TIMEOUT=${WAIT_TIMEOUT:=20}
INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600}
LOW_AGEING_TIME=${LOW_AGEING_TIME:=1000}
REQUIRE_JQ=${REQUIRE_JQ:=yes}
REQUIRE_MZ=${REQUIRE_MZ:=yes}
REQUIRE_MTOOLS=${REQUIRE_MTOOLS:=no}
STABLE_MAC_ADDRS=${STABLE_MAC_ADDRS:=no}
TCPDUMP_EXTRA_FLAGS=${TCPDUMP_EXTRA_FLAGS:=}

relative_path="${BASH_SOURCE%/*}"
if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
	relative_path="."
fi

if [[ -f $relative_path/forwarding.config ]]; then
	source "$relative_path/forwarding.config"
fi

##############################################################################
# Sanity checks

check_tc_version()
{
	tc -j &> /dev/null
	if [[ $? -ne 0 ]]; then
		echo "SKIP: iproute2 too old; tc is missing JSON support"
		exit $ksft_skip
	fi
}

# Old versions of tc don't understand "mpls_uc"
check_tc_mpls_support()
{
	local dev=$1; shift

	tc filter add dev $dev ingress protocol mpls_uc pref 1 handle 1 \
		matchall action pipe &> /dev/null
	if [[ $? -ne 0 ]]; then
		echo "SKIP: iproute2 too old; tc is missing MPLS support"
		return $ksft_skip
	fi
	tc filter del dev $dev ingress protocol mpls_uc pref 1 handle 1 \
		matchall
}

# Old versions of tc produce invalid json output for mpls lse statistics
check_tc_mpls_lse_stats()
{
	local dev=$1; shift
	local ret;

	tc filter add dev $dev ingress protocol mpls_uc pref 1 handle 1 \
		flower mpls lse depth 2                                 \
		action continue &> /dev/null

	if [[ $? -ne 0 ]]; then
		echo "SKIP: iproute2 too old; tc-flower is missing extended MPLS support"
		return $ksft_skip
	fi

	tc -j filter show dev $dev ingress protocol mpls_uc | jq . &> /dev/null
	ret=$?
	tc filter del dev $dev ingress protocol mpls_uc pref 1 handle 1 \
		flower

	if [[ $ret -ne 0 ]]; then
		echo "SKIP: iproute2 too old; tc-flower produces invalid json output for extended MPLS filters"
		return $ksft_skip
	fi
}

check_tc_shblock_support()
{
	tc filter help 2>&1 | grep block &> /dev/null
	if [[ $? -ne 0 ]]; then
		echo "SKIP: iproute2 too old; tc is missing shared block support"
		exit $ksft_skip
	fi
}

check_tc_chain_support()
{
	tc help 2>&1|grep chain &> /dev/null
	if [[ $? -ne 0 ]]; then
		echo "SKIP: iproute2 too old; tc is missing chain support"
		exit $ksft_skip
	fi
}

check_tc_action_hw_stats_support()
{
	tc actions help 2>&1 | grep -q hw_stats
	if [[ $? -ne 0 ]]; then
		echo "SKIP: iproute2 too old; tc is missing action hw_stats support"
		exit $ksft_skip
	fi
}

check_ethtool_lanes_support()
{
	ethtool --help 2>&1| grep lanes &> /dev/null
	if [[ $? -ne 0 ]]; then
		echo "SKIP: ethtool too old; it is missing lanes support"
		exit $ksft_skip
	fi
}

check_locked_port_support()
{
	if ! bridge -d link show | grep -q " locked"; then
		echo "SKIP: iproute2 too old; Locked port feature not supported."
		return $ksft_skip
	fi
}

if [[ "$(id -u)" -ne 0 ]]; then
	echo "SKIP: need root privileges"
	exit $ksft_skip
fi

if [[ "$CHECK_TC" = "yes" ]]; then
	check_tc_version
fi

require_command()
{
	local cmd=$1; shift

	if [[ ! -x "$(command -v "$cmd")" ]]; then
		echo "SKIP: $cmd not installed"
		exit $ksft_skip
	fi
}

if [[ "$REQUIRE_JQ" = "yes" ]]; then
	require_command jq
fi
if [[ "$REQUIRE_MZ" = "yes" ]]; then
	require_command $MZ
fi
if [[ "$REQUIRE_MTOOLS" = "yes" ]]; then
	# https://github.com/vladimiroltean/mtools/
	# patched for IPv6 support
	require_command msend
	require_command mreceive
fi

if [[ ! -v NUM_NETIFS ]]; then
	echo "SKIP: importer does not define \"NUM_NETIFS\""
	exit $ksft_skip
fi

##############################################################################
# Command line options handling

count=0

while [[ $# -gt 0 ]]; do
	if [[ "$count" -eq "0" ]]; then
		unset NETIFS
		declare -A NETIFS
	fi
	count=$((count + 1))
	NETIFS[p$count]="$1"
	shift
done

##############################################################################
# Network interfaces configuration

create_netif_veth()
{
	local i

	for ((i = 1; i <= NUM_NETIFS; ++i)); do
		local j=$((i+1))

		ip link show dev ${NETIFS[p$i]} &> /dev/null
		if [[ $? -ne 0 ]]; then
			ip link add ${NETIFS[p$i]} type veth \
				peer name ${NETIFS[p$j]}
			if [[ $? -ne 0 ]]; then
				echo "Failed to create netif"
				exit 1
			fi
		fi
		i=$j
	done
}

create_netif()
{
	case "$NETIF_TYPE" in
	veth) create_netif_veth
	      ;;
	*) echo "Can not create interfaces of type \'$NETIF_TYPE\'"
	   exit 1
	   ;;
	esac
}

declare -A MAC_ADDR_ORIG
mac_addr_prepare()
{
	local new_addr=
	local dev=

	for ((i = 1; i <= NUM_NETIFS; ++i)); do
		dev=${NETIFS[p$i]}
		new_addr=$(printf "00:01:02:03:04:%02x" $i)

		MAC_ADDR_ORIG["$dev"]=$(ip -j link show dev $dev | jq -e '.[].address')
		# Strip quotes
		MAC_ADDR_ORIG["$dev"]=${MAC_ADDR_ORIG["$dev"]//\"/}
		ip link set dev $dev address $new_addr
	done
}

mac_addr_restore()
{
	local dev=

	for ((i = 1; i <= NUM_NETIFS; ++i)); do
		dev=${NETIFS[p$i]}
		ip link set dev $dev address ${MAC_ADDR_ORIG["$dev"]}
	done
}

if [[ "$NETIF_CREATE" = "yes" ]]; then
	create_netif
fi

if [[ "$STABLE_MAC_ADDRS" = "yes" ]]; then
	mac_addr_prepare
fi

for ((i = 1; i <= NUM_NETIFS; ++i)); do
	ip link show dev ${NETIFS[p$i]} &> /dev/null
	if [[ $? -ne 0 ]]; then
		echo "SKIP: could not find all required interfaces"
		exit $ksft_skip
	fi
done

##############################################################################
# Helpers

# Exit status to return at the end. Set in case one of the tests fails.
EXIT_STATUS=0
# Per-test return value. Clear at the beginning of each test.
RET=0

check_err()
{
	local err=$1
	local msg=$2

	if [[ $RET -eq 0 && $err -ne 0 ]]; then
		RET=$err
		retmsg=$msg
	fi
}

check_fail()
{
	local err=$1
	local msg=$2

	if [[ $RET -eq 0 && $err -eq 0 ]]; then
		RET=1
		retmsg=$msg
	fi
}

check_err_fail()
{
	local should_fail=$1; shift
	local err=$1; shift
	local what=$1; shift

	if ((should_fail)); then
		check_fail $err "$what succeeded, but should have failed"
	else
		check_err $err "$what failed"
	fi
}

log_test()
{
	local test_name=$1
	local opt_str=$2

	if [[ $# -eq 2 ]]; then
		opt_str="($opt_str)"
	fi

	if [[ $RET -ne 0 ]]; then
		EXIT_STATUS=1
		printf "TEST: %-60s  [FAIL]\n" "$test_name $opt_str"
		if [[ ! -z "$retmsg" ]]; then
			printf "\t%s\n" "$retmsg"
		fi
		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
			echo "Hit enter to continue, 'q' to quit"
			read a
			[ "$a" = "q" ] && exit 1
		fi
		return 1
	fi

	printf "TEST: %-60s  [ OK ]\n" "$test_name $opt_str"
	return 0
}

log_test_skip()
{
	local test_name=$1
	local opt_str=$2

	printf "TEST: %-60s  [SKIP]\n" "$test_name $opt_str"
	return 0
}

log_info()
{
	local msg=$1

	echo "INFO: $msg"
}

busywait()
{
	local timeout=$1; shift

	local start_time="$(date -u +%s%3N)"
	while true
	do
		local out
		out=$("$@")
		local ret=$?
		if ((!ret)); then
			echo -n "$out"
			return 0
		fi

		local current_time="$(date -u +%s%3N)"
		if ((current_time - start_time > timeout)); then
			echo -n "$out"
			return 1
		fi
	done
}

not()
{
	"$@"
	[[ $? != 0 ]]
}

get_max()
{
	local arr=("$@")

	max=${arr[0]}
	for cur in ${arr[@]}; do
		if [[ $cur -gt $max ]]; then
			max=$cur
		fi
	done

	echo $max
}

grep_bridge_fdb()
{
	local addr=$1; shift
	local word
	local flag

	if [ "$1" == "self" ] || [ "$1" == "master" ]; then
		word=$1; shift
		if [ "$1" == "-v" ]; then
			flag=$1; shift
		fi
	fi

	$@ | grep $addr | grep $flag "$word"
}

wait_for_port_up()
{
	"$@" | grep -q "Link detected: yes"
}

wait_for_offload()
{
	"$@" | grep -q offload
}

wait_for_trap()
{
	"$@" | grep -q trap
}

until_counter_is()
{
	local expr=$1; shift
	local current=$("$@")

	echo $((current))
	((current $expr))
}

busywait_for_counter()
{
	local timeout=$1; shift
	local delta=$1; shift

	local base=$("$@")
	busywait "$timeout" until_counter_is ">= $((base + delta))" "$@"
}

setup_wait_dev()
{
	local dev=$1; shift
	local wait_time=${1:-$WAIT_TIME}; shift

	setup_wait_dev_with_timeout "$dev" $INTERFACE_TIMEOUT $wait_time

	if (($?)); then
		check_err 1
		log_test setup_wait_dev ": Interface $dev does not come up."
		exit 1
	fi
}

setup_wait_dev_with_timeout()
{
	local dev=$1; shift
	local max_iterations=${1:-$WAIT_TIMEOUT}; shift
	local wait_time=${1:-$WAIT_TIME}; shift
	local i

	for ((i = 1; i <= $max_iterations; ++i)); do
		ip link show dev $dev up \
			| grep 'state UP' &> /dev/null
		if [[ $? -ne 0 ]]; then
			sleep 1
		else
			sleep $wait_time
			return 0
		fi
	done

	return 1
}

setup_wait()
{
	local num_netifs=${1:-$NUM_NETIFS}
	local i

	for ((i = 1; i <= num_netifs; ++i)); do
		setup_wait_dev ${NETIFS[p$i]} 0
	done

	# Make sure links are ready.
	sleep $WAIT_TIME
}

cmd_jq()
{
	local cmd=$1
	local jq_exp=$2
	local jq_opts=$3
	local ret
	local output

	output="$($cmd)"
	# it the command fails, return error right away
	ret=$?
	if [[ $ret -ne 0 ]]; then
		return $ret
	fi
	output=$(echo $output | jq -r $jq_opts "$jq_exp")
	ret=$?
	if [[ $ret -ne 0 ]]; then
		return $ret
	fi
	echo $output
	# return success only in case of non-empty output
	[ ! -z "$output" ]
}

lldpad_app_wait_set()
{
	local dev=$1; shift

	while lldptool -t -i $dev -V APP -c app | grep -Eq "pending|unknown"; do
		echo "$dev: waiting for lldpad to push pending APP updates"
		sleep 5
	done
}

lldpad_app_wait_del()
{
	# Give lldpad a chance to push down the changes. If the device is downed
	# too soon, the updates will be left pending. However, they will have
	# been struck off the lldpad's DB already, so we won't be able to tell
	# they are pending. Then on next test iteration this would cause
	# weirdness as newly-added APP rules conflict with the old ones,
	# sometimes getting stuck in an "unknown" state.
	sleep 5
}

pre_cleanup()
{
	if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then
		echo "Pausing before cleanup, hit any key to continue"
		read
	fi

	if [[ "$STABLE_MAC_ADDRS" = "yes" ]]; then
		mac_addr_restore
	fi
}

vrf_prepare()
{
	ip -4 rule add pref 32765 table local
	ip -4 rule del pref 0
	ip -6 rule add pref 32765 table local
	ip -6 rule del pref 0
}

vrf_cleanup()
{
	ip -6 rule add pref 0 table local
	ip -6 rule del pref 32765
	ip -4 rule add pref 0 table local
	ip -4 rule del pref 32765
}

__last_tb_id=0
declare -A __TB_IDS

__vrf_td_id_assign()
{
	local vrf_name=$1

	__last_tb_id=$((__last_tb_id + 1))
	__TB_IDS[$vrf_name]=$__last_tb_id
	return $__last_tb_id
}

__vrf_td_id_lookup()
{
	local vrf_name=$1

	return ${__TB_IDS[$vrf_name]}
}

vrf_create()
{
	local vrf_name=$1
	local tb_id

	__vrf_td_id_assign $vrf_name
	tb_id=$?

	ip link add dev $vrf_name type vrf table $tb_id
	ip -4 route add table $tb_id unreachable default metric 4278198272
	ip -6 route add table $tb_id unreachable default metric 4278198272
}

vrf_destroy()
{
	local vrf_name=$1
	local tb_id

	__vrf_td_id_lookup $vrf_name
	tb_id=$?

	ip -6 route del table $tb_id unreachable default metric 4278198272
	ip -4 route del table $tb_id unreachable default metric 4278198272
	ip link del dev $vrf_name
}

__addr_add_del()
{
	local if_name=$1
	local add_del=$2
	local array

	shift
	shift
	array=("${@}")

	for addrstr in "${array[@]}"; do
		ip address $add_del $addrstr dev $if_name
	done
}

__simple_if_init()
{
	local if_name=$1; shift
	local vrf_name=$1; shift
	local addrs=("${@}")

	ip link set dev $if_name master $vrf_name
	ip link set dev $if_name up

	__addr_add_del $if_name add "${addrs[@]}"
}

__simple_if_fini()
{
	local if_name=$1; shift
	local addrs=("${@}")

	__addr_add_del $if_name del "${addrs[@]}"

	ip link set dev $if_name down
	ip link set dev $if_name nomaster
}

simple_if_init()
{
	local if_name=$1
	local vrf_name
	local array

	shift
	vrf_name=v$if_name
	array=("${@}")

	vrf_create $vrf_name
	ip link set dev $vrf_name up
	__simple_if_init $if_name $vrf_name "${array[@]}"
}

simple_if_fini()
{
	local if_name=$1
	local vrf_name
	local array

	shift
	vrf_name=v$if_name
	array=("${@}")

	__simple_if_fini $if_name "${array[@]}"
	vrf_destroy $vrf_name
}

tunnel_create()
{
	local name=$1; shift
	local type=$1; shift
	local local=$1; shift
	local remote=$1; shift

	ip link add name $name type $type \
	   local $local remote $remote "$@"
	ip link set dev $name up
}

tunnel_destroy()
{
	local name=$1; shift

	ip link del dev $name
}

vlan_create()
{
	local if_name=$1; shift
	local vid=$1; shift
	local vrf=$1; shift
	local ips=("${@}")
	local name=$if_name.$vid

	ip link add name $name link $if_name type vlan id $vid
	if [ "$vrf" != "" ]; then
		ip link set dev $name master $vrf
	fi
	ip link set dev $name up
	__addr_add_del $name add "${ips[@]}"
}

vlan_destroy()
{
	local if_name=$1; shift
	local vid=$1; shift
	local name=$if_name.$vid

	ip link del dev $name
}

team_create()
{
	local if_name=$1; shift
	local mode=$1; shift

	require_command $TEAMD
	$TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}'
	for slave in "$@"; do
		ip link set dev $slave down
		ip link set dev $slave master $if_name
		ip link set dev $slave up
	done
	ip link set dev $if_name up
}

team_destroy()
{
	local if_name=$1; shift

	$TEAMD -t $if_name -k
}

master_name_get()
{
	local if_name=$1

	ip -j link show dev $if_name | jq -r '.[]["master"]'
}

link_stats_get()
{
	local if_name=$1; shift
	local dir=$1; shift
	local stat=$1; shift

	ip -j -s link show dev $if_name \
		| jq '.[]["stats64"]["'$dir'"]["'$stat'"]'
}

link_stats_tx_packets_get()
{
	link_stats_get $1 tx packets
}

link_stats_rx_errors_get()
{
	link_stats_get $1 rx errors
}

tc_rule_stats_get()
{
	local dev=$1; shift
	local pref=$1; shift
	local dir=$1; shift
	local selector=${1:-.packets}; shift

	tc -j -s filter show dev $dev ${dir:-ingress} pref $pref \
	    | jq ".[1].options.actions[].stats$selector"
}

tc_rule_handle_stats_get()
{
	local id=$1; shift
	local handle=$1; shift
	local selector=${1:-.packets}; shift

	tc -j -s filter show $id \
	    | jq ".[] | select(.options.handle == $handle) | \
		  .options.actions[0].stats$selector"
}

ethtool_stats_get()
{
	local dev=$1; shift
	local stat=$1; shift

	ethtool -S $dev | grep "^ *$stat:" | head -n 1 | cut -d: -f2
}

qdisc_stats_get()
{
	local dev=$1; shift
	local handle=$1; shift
	local selector=$1; shift

	tc -j -s qdisc show dev "$dev" \
	    | jq '.[] | select(.handle == "'"$handle"'") | '"$selector"
}

qdisc_parent_stats_get()
{
	local dev=$1; shift
	local parent=$1; shift
	local selector=$1; shift

	tc -j -s qdisc show dev "$dev" invisible \
	    | jq '.[] | select(.parent == "'"$parent"'") | '"$selector"
}

ipv6_stats_get()
{
	local dev=$1; shift
	local stat=$1; shift

	cat /proc/net/dev_snmp6/$dev | grep "^$stat" | cut -f2
}

hw_stats_get()
{
	local suite=$1; shift
	local if_name=$1; shift
	local dir=$1; shift
	local stat=$1; shift

	ip -j stats show dev $if_name group offload subgroup $suite |
		jq ".[0].stats64.$dir.$stat"
}

humanize()
{
	local speed=$1; shift

	for unit in bps Kbps Mbps Gbps; do
		if (($(echo "$speed < 1024" | bc))); then
			break
		fi

		speed=$(echo "scale=1; $speed / 1024" | bc)
	done

	echo "$speed${unit}"
}

rate()
{
	local t0=$1; shift
	local t1=$1; shift
	local interval=$1; shift

	echo $((8 * (t1 - t0) / interval))
}

packets_rate()
{
	local t0=$1; shift
	local t1=$1; shift
	local interval=$1; shift

	echo $(((t1 - t0) / interval))
}

mac_get()
{
	local if_name=$1

	ip -j link show dev $if_name | jq -r '.[]["address"]'
}

ipv6_lladdr_get()
{
	local if_name=$1

	ip -j addr show dev $if_name | \
		jq -r '.[]["addr_info"][] | select(.scope == "link").local' | \
		head -1
}

bridge_ageing_time_get()
{
	local bridge=$1
	local ageing_time

	# Need to divide by 100 to convert to seconds.
	ageing_time=$(ip -j -d link show dev $bridge \
		      | jq '.[]["linkinfo"]["info_data"]["ageing_time"]')
	echo $((ageing_time / 100))
}

declare -A SYSCTL_ORIG
sysctl_set()
{
	local key=$1; shift
	local value=$1; shift

	SYSCTL_ORIG[$key]=$(sysctl -n $key)
	sysctl -qw $key=$value
}

sysctl_restore()
{
	local key=$1; shift

	sysctl -qw $key=${SYSCTL_ORIG["$key"]}
}

forwarding_enable()
{
	sysctl_set net.ipv4.conf.all.forwarding 1
	sysctl_set net.ipv6.conf.all.forwarding 1
}

forwarding_restore()
{
	sysctl_restore net.ipv6.conf.all.forwarding
	sysctl_restore net.ipv4.conf.all.forwarding
}

declare -A MTU_ORIG
mtu_set()
{
	local dev=$1; shift
	local mtu=$1; shift

	MTU_ORIG["$dev"]=$(ip -j link show dev $dev | jq -e '.[].mtu')
	ip link set dev $dev mtu $mtu
}

mtu_restore()
{
	local dev=$1; shift

	ip link set dev $dev mtu ${MTU_ORIG["$dev"]}
}

tc_offload_check()
{
	local num_netifs=${1:-$NUM_NETIFS}

	for ((i = 1; i <= num_netifs; ++i)); do
		ethtool -k ${NETIFS[p$i]} \
			| grep "hw-tc-offload: on" &> /dev/null
		if [[ $? -ne 0 ]]; then
			return 1
		fi
	done

	return 0
}

trap_install()
{
	local dev=$1; shift
	local direction=$1; shift

	# Some devices may not support or need in-hardware trapping of traffic
	# (e.g. the veth pairs that this library creates for non-existent
	# loopbacks). Use continue instead, so that there is a filter in there
	# (some tests check counters), and so that other filters are still
	# processed.
	tc filter add dev $dev $direction pref 1 \
		flower skip_sw action trap 2>/dev/null \
	    || tc filter add dev $dev $direction pref 1 \
		       flower action continue
}

trap_uninstall()
{
	local dev=$1; shift
	local direction=$1; shift

	tc filter del dev $dev $direction pref 1 flower
}

slow_path_trap_install()
{
	# For slow-path testing, we need to install a trap to get to
	# slow path the packets that would otherwise be switched in HW.
	if [ "${tcflags/skip_hw}" != "$tcflags" ]; then
		trap_install "$@"
	fi
}

slow_path_trap_uninstall()
{
	if [ "${tcflags/skip_hw}" != "$tcflags" ]; then
		trap_uninstall "$@"
	fi
}

__icmp_capture_add_del()
{
	local add_del=$1; shift
	local pref=$1; shift
	local vsuf=$1; shift
	local tundev=$1; shift
	local filter=$1; shift

	tc filter $add_del dev "$tundev" ingress \
	   proto ip$vsuf pref $pref \
	   flower ip_proto icmp$vsuf $filter \
	   action pass
}

icmp_capture_install()
{
	__icmp_capture_add_del add 100 "" "$@"
}

icmp_capture_uninstall()
{
	__icmp_capture_add_del del 100 "" "$@"
}

icmp6_capture_install()
{
	__icmp_capture_add_del add 100 v6 "$@"
}

icmp6_capture_uninstall()
{
	__icmp_capture_add_del del 100 v6 "$@"
}

__vlan_capture_add_del()
{
	local add_del=$1; shift
	local pref=$1; shift
	local dev=$1; shift
	local filter=$1; shift

	tc filter $add_del dev "$dev" ingress \
	   proto 802.1q pref $pref \
	   flower $filter \
	   action pass
}

vlan_capture_install()
{
	__vlan_capture_add_del add 100 "$@"
}

vlan_capture_uninstall()
{
	__vlan_capture_add_del del 100 "$@"
}

__dscp_capture_add_del()
{
	local add_del=$1; shift
	local dev=$1; shift
	local base=$1; shift
	local dscp;

	for prio in {0..7}; do
		dscp=$((base + prio))
		__icmp_capture_add_del $add_del $((dscp + 100)) "" $dev \
				       "skip_hw ip_tos $((dscp << 2))"
	done
}

dscp_capture_install()
{
	local dev=$1; shift
	local base=$1; shift

	__dscp_capture_add_del add $dev $base
}

dscp_capture_uninstall()
{
	local dev=$1; shift
	local base=$1; shift

	__dscp_capture_add_del del $dev $base
}

dscp_fetch_stats()
{
	local dev=$1; shift
	local base=$1; shift

	for prio in {0..7}; do
		local dscp=$((base + prio))
		local t=$(tc_rule_stats_get $dev $((dscp + 100)))
		echo "[$dscp]=$t "
	done
}

matchall_sink_create()
{
	local dev=$1; shift

	tc qdisc add dev $dev clsact
	tc filter add dev $dev ingress \
	   pref 10000 \
	   matchall \
	   action drop
}

tests_run()
{
	local current_test

	for current_test in ${TESTS:-$ALL_TESTS}; do
		$current_test
	done
}

multipath_eval()
{
	local desc="$1"
	local weight_rp12=$2
	local weight_rp13=$3
	local packets_rp12=$4
	local packets_rp13=$5
	local weights_ratio packets_ratio diff

	RET=0

	if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
		weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
				| bc -l)
	else
		weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" \
				| bc -l)
	fi

	if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
	       check_err 1 "Packet difference is 0"
	       log_test "Multipath"
	       log_info "Expected ratio $weights_ratio"
	       return
	fi

	if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
		packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
				| bc -l)
	else
		packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" \
				| bc -l)
	fi

	diff=$(echo $weights_ratio - $packets_ratio | bc -l)
	diff=${diff#-}

	test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
	check_err $? "Too large discrepancy between expected and measured ratios"
	log_test "$desc"
	log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
}

in_ns()
{
	local name=$1; shift

	ip netns exec $name bash <<-EOF
		NUM_NETIFS=0
		source lib.sh
		$(for a in "$@"; do printf "%q${IFS:0:1}" "$a"; done)
	EOF
}

##############################################################################
# Tests

ping_do()
{
	local if_name=$1
	local dip=$2
	local args=$3
	local vrf_name

	vrf_name=$(master_name_get $if_name)
	ip vrf exec $vrf_name \
		$PING $args $dip -c $PING_COUNT -i 0.1 \
		-w $PING_TIMEOUT &> /dev/null
}

ping_test()
{
	RET=0

	ping_do $1 $2
	check_err $?
	log_test "ping$3"
}

ping6_do()
{
	local if_name=$1
	local dip=$2
	local args=$3
	local vrf_name

	vrf_name=$(master_name_get $if_name)
	ip vrf exec $vrf_name \
		$PING6 $args $dip -c $PING_COUNT -i 0.1 \
		-w $PING_TIMEOUT &> /dev/null
}

ping6_test()
{
	RET=0

	ping6_do $1 $2
	check_err $?
	log_test "ping6$3"
}

learning_test()
{
	local bridge=$1
	local br_port1=$2	# Connected to `host1_if`.
	local host1_if=$3
	local host2_if=$4
	local mac=de:ad:be:ef:13:37
	local ageing_time

	RET=0

	bridge -j fdb show br $bridge brport $br_port1 \
		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
	check_fail $? "Found FDB record when should not"

	# Disable unknown unicast flooding on `br_port1` to make sure
	# packets are only forwarded through the port after a matching
	# FDB entry was installed.
	bridge link set dev $br_port1 flood off

	tc qdisc add dev $host1_if ingress
	tc filter add dev $host1_if ingress protocol ip pref 1 handle 101 \
		flower dst_mac $mac action drop

	$MZ $host2_if -c 1 -p 64 -b $mac -t ip -q
	sleep 1

	tc -j -s filter show dev $host1_if ingress \
		| jq -e ".[] | select(.options.handle == 101) \
		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
	check_fail $? "Packet reached second host when should not"

	$MZ $host1_if -c 1 -p 64 -a $mac -t ip -q
	sleep 1

	bridge -j fdb show br $bridge brport $br_port1 \
		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
	check_err $? "Did not find FDB record when should"

	$MZ $host2_if -c 1 -p 64 -b $mac -t ip -q
	sleep 1

	tc -j -s filter show dev $host1_if ingress \
		| jq -e ".[] | select(.options.handle == 101) \
		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
	check_err $? "Packet did not reach second host when should"

	# Wait for 10 seconds after the ageing time to make sure FDB
	# record was aged-out.
	ageing_time=$(bridge_ageing_time_get $bridge)
	sleep $((ageing_time + 10))

	bridge -j fdb show br $bridge brport $br_port1 \
		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
	check_fail $? "Found FDB record when should not"

	bridge link set dev $br_port1 learning off

	$MZ $host1_if -c 1 -p 64 -a $mac -t ip -q
	sleep 1

	bridge -j fdb show br $bridge brport $br_port1 \
		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
	check_fail $? "Found FDB record when should not"

	bridge link set dev $br_port1 learning on

	tc filter del dev $host1_if ingress protocol ip pref 1 handle 101 flower
	tc qdisc del dev $host1_if ingress

	bridge link set dev $br_port1 flood on

	log_test "FDB learning"
}

flood_test_do()
{
	local should_flood=$1
	local mac=$2
	local ip=$3
	local host1_if=$4
	local host2_if=$5
	local err=0

	# Add an ACL on `host2_if` which will tell us whether the packet
	# was flooded to it or not.
	ip link set $host2_if promisc on
	tc qdisc add dev $host2_if ingress
	tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \
		flower dst_mac $mac action drop

	$MZ $host1_if -c 1 -p 64 -b $mac -B $ip -t ip -q
	sleep 1

	tc -j -s filter show dev $host2_if ingress \
		| jq -e ".[] | select(.options.handle == 101) \
		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
	if [[ $? -ne 0 && $should_flood == "true" || \
	      $? -eq 0 && $should_flood == "false" ]]; then
		err=1
	fi

	tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower
	tc qdisc del dev $host2_if ingress
	ip link set $host2_if promisc off

	return $err
}

flood_unicast_test()
{
	local br_port=$1
	local host1_if=$2
	local host2_if=$3
	local mac=de:ad:be:ef:13:37
	local ip=192.0.2.100

	RET=0

	bridge link set dev $br_port flood off

	flood_test_do false $mac $ip $host1_if $host2_if
	check_err $? "Packet flooded when should not"

	bridge link set dev $br_port flood on

	flood_test_do true $mac $ip $host1_if $host2_if
	check_err $? "Packet was not flooded when should"

	log_test "Unknown unicast flood"
}

flood_multicast_test()
{
	local br_port=$1
	local host1_if=$2
	local host2_if=$3
	local mac=01:00:5e:00:00:01
	local ip=239.0.0.1

	RET=0

	bridge link set dev $br_port mcast_flood off

	flood_test_do false $mac $ip $host1_if $host2_if
	check_err $? "Packet flooded when should not"

	bridge link set dev $br_port mcast_flood on

	flood_test_do true $mac $ip $host1_if $host2_if
	check_err $? "Packet was not flooded when should"

	log_test "Unregistered multicast flood"
}

flood_test()
{
	# `br_port` is connected to `host2_if`
	local br_port=$1
	local host1_if=$2
	local host2_if=$3

	flood_unicast_test $br_port $host1_if $host2_if
	flood_multicast_test $br_port $host1_if $host2_if
}

__start_traffic()
{
	local pktsize=$1; shift
	local proto=$1; shift
	local h_in=$1; shift    # Where the traffic egresses the host
	local sip=$1; shift
	local dip=$1; shift
	local dmac=$1; shift

	$MZ $h_in -p $pktsize -A $sip -B $dip -c 0 \
		-a own -b $dmac -t "$proto" -q "$@" &
	sleep 1
}

start_traffic_pktsize()
{
	local pktsize=$1; shift

	__start_traffic $pktsize udp "$@"
}

start_tcp_traffic_pktsize()
{
	local pktsize=$1; shift

	__start_traffic $pktsize tcp "$@"
}

start_traffic()
{
	start_traffic_pktsize 8000 "$@"
}

start_tcp_traffic()
{
	start_tcp_traffic_pktsize 8000 "$@"
}

stop_traffic()
{
	# Suppress noise from killing mausezahn.
	{ kill %% && wait %%; } 2>/dev/null
}

declare -A cappid
declare -A capfile
declare -A capout

tcpdump_start()
{
	local if_name=$1; shift
	local ns=$1; shift

	capfile[$if_name]=$(mktemp)
	capout[$if_name]=$(mktemp)

	if [ -z $ns ]; then
		ns_cmd=""
	else
		ns_cmd="ip netns exec ${ns}"
	fi

	if [ -z $SUDO_USER ] ; then
		capuser=""
	else
		capuser="-Z $SUDO_USER"
	fi

	$ns_cmd tcpdump $TCPDUMP_EXTRA_FLAGS -e -n -Q in -i $if_name \
		-s 65535 -B 32768 $capuser -w ${capfile[$if_name]} \
		> "${capout[$if_name]}" 2>&1 &
	cappid[$if_name]=$!

	sleep 1
}

tcpdump_stop()
{
	local if_name=$1
	local pid=${cappid[$if_name]}

	$ns_cmd kill "$pid" && wait "$pid"
	sleep 1
}

tcpdump_cleanup()
{
	local if_name=$1

	rm ${capfile[$if_name]} ${capout[$if_name]}
}

tcpdump_show()
{
	local if_name=$1

	tcpdump -e -n -r ${capfile[$if_name]} 2>&1
}

# return 0 if the packet wasn't seen on host2_if or 1 if it was
mcast_packet_test()
{
	local mac=$1
	local src_ip=$2
	local ip=$3
	local host1_if=$4
	local host2_if=$5
	local seen=0
	local tc_proto="ip"
	local mz_v6arg=""

	# basic check to see if we were passed an IPv4 address, if not assume IPv6
	if [[ ! $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
		tc_proto="ipv6"
		mz_v6arg="-6"
	fi

	# Add an ACL on `host2_if` which will tell us whether the packet
	# was received by it or not.
	tc qdisc add dev $host2_if ingress
	tc filter add dev $host2_if ingress protocol $tc_proto pref 1 handle 101 \
		flower ip_proto udp dst_mac $mac action drop

	$MZ $host1_if $mz_v6arg -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp "dp=4096,sp=2048" -q
	sleep 1

	tc -j -s filter show dev $host2_if ingress \
		| jq -e ".[] | select(.options.handle == 101) \
		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
	if [[ $? -eq 0 ]]; then
		seen=1
	fi

	tc filter del dev $host2_if ingress protocol $tc_proto pref 1 handle 101 flower
	tc qdisc del dev $host2_if ingress

	return $seen
}

brmcast_check_sg_entries()
{
	local report=$1; shift
	local slist=("$@")
	local sarg=""

	for src in "${slist[@]}"; do
		sarg="${sarg} and .source_list[].address == \"$src\""
	done
	bridge -j -d -s mdb show dev br0 \
		| jq -e ".[].mdb[] | \
			 select(.grp == \"$TEST_GROUP\" and .source_list != null $sarg)" &>/dev/null
	check_err $? "Wrong *,G entry source list after $report report"

	for sgent in "${slist[@]}"; do
		bridge -j -d -s mdb show dev br0 \
			| jq -e ".[].mdb[] | \
				 select(.grp == \"$TEST_GROUP\" and .src == \"$sgent\")" &>/dev/null
		check_err $? "Missing S,G entry ($sgent, $TEST_GROUP)"
	done
}

brmcast_check_sg_fwding()
{
	local should_fwd=$1; shift
	local sources=("$@")

	for src in "${sources[@]}"; do
		local retval=0

		mcast_packet_test $TEST_GROUP_MAC $src $TEST_GROUP $h2 $h1
		retval=$?
		if [ $should_fwd -eq 1 ]; then
			check_fail $retval "Didn't forward traffic from S,G ($src, $TEST_GROUP)"
		else
			check_err $retval "Forwarded traffic for blocked S,G ($src, $TEST_GROUP)"
		fi
	done
}

brmcast_check_sg_state()
{
	local is_blocked=$1; shift
	local sources=("$@")
	local should_fail=1

	if [ $is_blocked -eq 1 ]; then
		should_fail=0
	fi

	for src in "${sources[@]}"; do
		bridge -j -d -s mdb show dev br0 \
			| jq -e ".[].mdb[] | \
				 select(.grp == \"$TEST_GROUP\" and .source_list != null) |
				 .source_list[] |
				 select(.address == \"$src\") |
				 select(.timer == \"0.00\")" &>/dev/null
		check_err_fail $should_fail $? "Entry $src has zero timer"

		bridge -j -d -s mdb show dev br0 \
			| jq -e ".[].mdb[] | \
				 select(.grp == \"$TEST_GROUP\" and .src == \"$src\" and \
				 .flags[] == \"blocked\")" &>/dev/null
		check_err_fail $should_fail $? "Entry $src has blocked flag"
	done
}

mc_join()
{
	local if_name=$1
	local group=$2
	local vrf_name=$(master_name_get $if_name)

	# We don't care about actual reception, just about joining the
	# IP multicast group and adding the L2 address to the device's
	# MAC filtering table
	ip vrf exec $vrf_name \
		mreceive -g $group -I $if_name > /dev/null 2>&1 &
	mreceive_pid=$!

	sleep 1
}

mc_leave()
{
	kill "$mreceive_pid" && wait "$mreceive_pid"
}

mc_send()
{
	local if_name=$1
	local groups=$2
	local vrf_name=$(master_name_get $if_name)

	ip vrf exec $vrf_name \
		msend -g $groups -I $if_name -c 1 > /dev/null 2>&1
}

start_ip_monitor()
{
	local mtype=$1; shift
	local ip=${1-ip}; shift

	# start the monitor in the background
	tmpfile=`mktemp /var/run/nexthoptestXXX`
	mpid=`($ip monitor $mtype > $tmpfile & echo $!) 2>/dev/null`
	sleep 0.2
	echo "$mpid $tmpfile"
}

stop_ip_monitor()
{
	local mpid=$1; shift
	local tmpfile=$1; shift
	local el=$1; shift
	local what=$1; shift

	sleep 0.2
	kill $mpid
	local lines=`grep '^\w' $tmpfile | wc -l`
	test $lines -eq $el
	check_err $? "$what: $lines lines of events, expected $el"
	rm -rf $tmpfile
}

hw_stats_monitor_test()
{
	local dev=$1; shift
	local type=$1; shift
	local make_suitable=$1; shift
	local make_unsuitable=$1; shift
	local ip=${1-ip}; shift

	RET=0

	# Expect a notification about enablement.
	local ipmout=$(start_ip_monitor stats "$ip")
	$ip stats set dev $dev ${type}_stats on
	stop_ip_monitor $ipmout 1 "${type}_stats enablement"

	# Expect a notification about offload.
	local ipmout=$(start_ip_monitor stats "$ip")
	$make_suitable
	stop_ip_monitor $ipmout 1 "${type}_stats installation"

	# Expect a notification about loss of offload.
	local ipmout=$(start_ip_monitor stats "$ip")
	$make_unsuitable
	stop_ip_monitor $ipmout 1 "${type}_stats deinstallation"

	# Expect a notification about disablement
	local ipmout=$(start_ip_monitor stats "$ip")
	$ip stats set dev $dev ${type}_stats off
	stop_ip_monitor $ipmout 1 "${type}_stats disablement"

	log_test "${type}_stats notifications"
}