1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
|
// SPDX-License-Identifier: GPL-2.0
/*
* Serial port driver for BCM2835AUX UART
*
* Copyright (C) 2016 Martin Sperl <kernel@martin.sperl.org>
*
* Based on 8250_lpc18xx.c:
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
*
* The bcm2835aux is capable of RTS auto flow-control, but this driver doesn't
* take advantage of it yet. When adding support, be sure not to enable it
* simultaneously to rs485.
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include "8250.h"
#define BCM2835_AUX_UART_CNTL 8
#define BCM2835_AUX_UART_CNTL_RXEN 0x01 /* Receiver enable */
#define BCM2835_AUX_UART_CNTL_TXEN 0x02 /* Transmitter enable */
#define BCM2835_AUX_UART_CNTL_AUTORTS 0x04 /* RTS set by RX fill level */
#define BCM2835_AUX_UART_CNTL_AUTOCTS 0x08 /* CTS stops transmitter */
#define BCM2835_AUX_UART_CNTL_RTS3 0x00 /* RTS set until 3 chars left */
#define BCM2835_AUX_UART_CNTL_RTS2 0x10 /* RTS set until 2 chars left */
#define BCM2835_AUX_UART_CNTL_RTS1 0x20 /* RTS set until 1 chars left */
#define BCM2835_AUX_UART_CNTL_RTS4 0x30 /* RTS set until 4 chars left */
#define BCM2835_AUX_UART_CNTL_RTSINV 0x40 /* Invert auto RTS polarity */
#define BCM2835_AUX_UART_CNTL_CTSINV 0x80 /* Invert auto CTS polarity */
/**
* struct bcm2835aux_data - driver private data of BCM2835 auxiliary UART
* @clk: clock producer of the port's uartclk
* @line: index of the port's serial8250_ports[] entry
* @cntl: cached copy of CNTL register
*/
struct bcm2835aux_data {
struct clk *clk;
int line;
u32 cntl;
};
static void bcm2835aux_rs485_start_tx(struct uart_8250_port *up)
{
if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
struct bcm2835aux_data *data = dev_get_drvdata(up->port.dev);
data->cntl &= ~BCM2835_AUX_UART_CNTL_RXEN;
serial_out(up, BCM2835_AUX_UART_CNTL, data->cntl);
}
/*
* On the bcm2835aux, the MCR register contains no other
* flags besides RTS. So no need for a read-modify-write.
*/
if (up->port.rs485.flags & SER_RS485_RTS_ON_SEND)
serial8250_out_MCR(up, 0);
else
serial8250_out_MCR(up, UART_MCR_RTS);
}
static void bcm2835aux_rs485_stop_tx(struct uart_8250_port *up)
{
if (up->port.rs485.flags & SER_RS485_RTS_AFTER_SEND)
serial8250_out_MCR(up, 0);
else
serial8250_out_MCR(up, UART_MCR_RTS);
if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
struct bcm2835aux_data *data = dev_get_drvdata(up->port.dev);
data->cntl |= BCM2835_AUX_UART_CNTL_RXEN;
serial_out(up, BCM2835_AUX_UART_CNTL, data->cntl);
}
}
static int bcm2835aux_serial_probe(struct platform_device *pdev)
{
struct uart_8250_port up = { };
struct bcm2835aux_data *data;
struct resource *res;
int ret;
/* allocate the custom structure */
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
/* initialize data */
up.capabilities = UART_CAP_FIFO | UART_CAP_MINI;
up.port.dev = &pdev->dev;
up.port.regshift = 2;
up.port.type = PORT_16550;
up.port.iotype = UPIO_MEM;
up.port.fifosize = 8;
up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE |
UPF_SKIP_TEST | UPF_IOREMAP;
up.port.rs485_config = serial8250_em485_config;
up.rs485_start_tx = bcm2835aux_rs485_start_tx;
up.rs485_stop_tx = bcm2835aux_rs485_stop_tx;
/* initialize cached copy with power-on reset value */
data->cntl = BCM2835_AUX_UART_CNTL_RXEN | BCM2835_AUX_UART_CNTL_TXEN;
platform_set_drvdata(pdev, data);
/* get the clock - this also enables the HW */
data->clk = devm_clk_get(&pdev->dev, NULL);
ret = PTR_ERR_OR_ZERO(data->clk);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev, "could not get clk: %d\n", ret);
return ret;
}
/* get the interrupt */
ret = platform_get_irq(pdev, 0);
if (ret < 0)
return ret;
up.port.irq = ret;
/* map the main registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "memory resource not found");
return -EINVAL;
}
up.port.mapbase = res->start;
up.port.mapsize = resource_size(res);
/* Check for a fixed line number */
ret = of_alias_get_id(pdev->dev.of_node, "serial");
if (ret >= 0)
up.port.line = ret;
/* enable the clock as a last step */
ret = clk_prepare_enable(data->clk);
if (ret) {
dev_err(&pdev->dev, "unable to enable uart clock - %d\n",
ret);
return ret;
}
/* the HW-clock divider for bcm2835aux is 8,
* but 8250 expects a divider of 16,
* so we have to multiply the actual clock by 2
* to get identical baudrates.
*/
up.port.uartclk = clk_get_rate(data->clk) * 2;
/* register the port */
ret = serial8250_register_8250_port(&up);
if (ret < 0) {
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"unable to register 8250 port - %d\n", ret);
goto dis_clk;
}
data->line = ret;
return 0;
dis_clk:
clk_disable_unprepare(data->clk);
return ret;
}
static int bcm2835aux_serial_remove(struct platform_device *pdev)
{
struct bcm2835aux_data *data = platform_get_drvdata(pdev);
serial8250_unregister_port(data->line);
clk_disable_unprepare(data->clk);
return 0;
}
static const struct of_device_id bcm2835aux_serial_match[] = {
{ .compatible = "brcm,bcm2835-aux-uart" },
{ },
};
MODULE_DEVICE_TABLE(of, bcm2835aux_serial_match);
static struct platform_driver bcm2835aux_serial_driver = {
.driver = {
.name = "bcm2835-aux-uart",
.of_match_table = bcm2835aux_serial_match,
},
.probe = bcm2835aux_serial_probe,
.remove = bcm2835aux_serial_remove,
};
module_platform_driver(bcm2835aux_serial_driver);
#ifdef CONFIG_SERIAL_8250_CONSOLE
static int __init early_bcm2835aux_setup(struct earlycon_device *device,
const char *options)
{
if (!device->port.membase)
return -ENODEV;
device->port.iotype = UPIO_MEM32;
device->port.regshift = 2;
return early_serial8250_setup(device, NULL);
}
OF_EARLYCON_DECLARE(bcm2835aux, "brcm,bcm2835-aux-uart",
early_bcm2835aux_setup);
#endif
MODULE_DESCRIPTION("BCM2835 auxiliar UART driver");
MODULE_AUTHOR("Martin Sperl <kernel@martin.sperl.org>");
MODULE_LICENSE("GPL v2");
|
