1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
|
// SPDX-License-Identifier: GPL-2.0+
/*
* drivers/net/phy/realtek.c
*
* Driver for Realtek PHYs
*
* Author: Johnson Leung <r58129@freescale.com>
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*/
#include <linux/bitops.h>
#include <linux/phy.h>
#include <linux/module.h>
#define RTL821x_PHYSR 0x11
#define RTL821x_PHYSR_DUPLEX BIT(13)
#define RTL821x_PHYSR_SPEED GENMASK(15, 14)
#define RTL821x_INER 0x12
#define RTL8211B_INER_INIT 0x6400
#define RTL8211E_INER_LINK_STATUS BIT(10)
#define RTL8211F_INER_LINK_STATUS BIT(4)
#define RTL821x_INSR 0x13
#define RTL821x_PAGE_SELECT 0x1f
#define RTL8211F_INSR 0x1d
#define RTL8211F_TX_DELAY BIT(8)
#define RTL8201F_ISR 0x1e
#define RTL8201F_IER 0x13
#define RTL8366RB_POWER_SAVE 0x15
#define RTL8366RB_POWER_SAVE_ON BIT(12)
MODULE_DESCRIPTION("Realtek PHY driver");
MODULE_AUTHOR("Johnson Leung");
MODULE_LICENSE("GPL");
static int rtl821x_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, RTL821x_PAGE_SELECT);
}
static int rtl821x_write_page(struct phy_device *phydev, int page)
{
return __phy_write(phydev, RTL821x_PAGE_SELECT, page);
}
static int rtl8201_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, RTL8201F_ISR);
return (err < 0) ? err : 0;
}
static int rtl821x_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, RTL821x_INSR);
return (err < 0) ? err : 0;
}
static int rtl8211f_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read_paged(phydev, 0xa43, RTL8211F_INSR);
return (err < 0) ? err : 0;
}
static int rtl8201_config_intr(struct phy_device *phydev)
{
u16 val;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
val = BIT(13) | BIT(12) | BIT(11);
else
val = 0;
return phy_write_paged(phydev, 0x7, RTL8201F_IER, val);
}
static int rtl8211b_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, RTL821x_INER,
RTL8211B_INER_INIT);
else
err = phy_write(phydev, RTL821x_INER, 0);
return err;
}
static int rtl8211e_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, RTL821x_INER,
RTL8211E_INER_LINK_STATUS);
else
err = phy_write(phydev, RTL821x_INER, 0);
return err;
}
static int rtl8211f_config_intr(struct phy_device *phydev)
{
u16 val;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
val = RTL8211F_INER_LINK_STATUS;
else
val = 0;
return phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
}
static int rtl8211_config_aneg(struct phy_device *phydev)
{
int ret;
ret = genphy_config_aneg(phydev);
if (ret < 0)
return ret;
/* Quirk was copied from vendor driver. Unfortunately it includes no
* description of the magic numbers.
*/
if (phydev->speed == SPEED_100 && phydev->autoneg == AUTONEG_DISABLE) {
phy_write(phydev, 0x17, 0x2138);
phy_write(phydev, 0x0e, 0x0260);
} else {
phy_write(phydev, 0x17, 0x2108);
phy_write(phydev, 0x0e, 0x0000);
}
return 0;
}
static int rtl8211c_config_init(struct phy_device *phydev)
{
/* RTL8211C has an issue when operating in Gigabit slave mode */
return phy_set_bits(phydev, MII_CTRL1000,
CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
}
static int rtl8211f_config_init(struct phy_device *phydev)
{
u16 val = 0;
/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
val = RTL8211F_TX_DELAY;
return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val);
}
static int rtl8211b_suspend(struct phy_device *phydev)
{
phy_write(phydev, MII_MMD_DATA, BIT(9));
return genphy_suspend(phydev);
}
static int rtl8211b_resume(struct phy_device *phydev)
{
phy_write(phydev, MII_MMD_DATA, 0);
return genphy_resume(phydev);
}
static int rtl8366rb_config_init(struct phy_device *phydev)
{
int ret;
ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE,
RTL8366RB_POWER_SAVE_ON);
if (ret) {
dev_err(&phydev->mdio.dev,
"error enabling power management\n");
}
return ret;
}
static struct phy_driver realtek_drvs[] = {
{
PHY_ID_MATCH_EXACT(0x00008201),
.name = "RTL8201CP Ethernet",
}, {
PHY_ID_MATCH_EXACT(0x001cc816),
.name = "RTL8201F Fast Ethernet",
.ack_interrupt = &rtl8201_ack_interrupt,
.config_intr = &rtl8201_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc910),
.name = "RTL8211 Gigabit Ethernet",
.config_aneg = rtl8211_config_aneg,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
}, {
PHY_ID_MATCH_EXACT(0x001cc912),
.name = "RTL8211B Gigabit Ethernet",
.ack_interrupt = &rtl821x_ack_interrupt,
.config_intr = &rtl8211b_config_intr,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.suspend = rtl8211b_suspend,
.resume = rtl8211b_resume,
}, {
PHY_ID_MATCH_EXACT(0x001cc913),
.name = "RTL8211C Gigabit Ethernet",
.config_init = rtl8211c_config_init,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
}, {
PHY_ID_MATCH_EXACT(0x001cc914),
.name = "RTL8211DN Gigabit Ethernet",
.ack_interrupt = rtl821x_ack_interrupt,
.config_intr = rtl8211e_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
PHY_ID_MATCH_EXACT(0x001cc915),
.name = "RTL8211E Gigabit Ethernet",
.ack_interrupt = &rtl821x_ack_interrupt,
.config_intr = &rtl8211e_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
PHY_ID_MATCH_EXACT(0x001cc916),
.name = "RTL8211F Gigabit Ethernet",
.config_init = &rtl8211f_config_init,
.ack_interrupt = &rtl8211f_ack_interrupt,
.config_intr = &rtl8211f_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc800),
.name = "Generic Realtek PHY",
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
.config_init = &rtl8366rb_config_init,
/* These interrupts are handled by the irq controller
* embedded inside the RTL8366RB, they get unmasked when the
* irq is requested and ACKed by reading the status register,
* which is done by the irqchip code.
*/
.ack_interrupt = genphy_no_ack_interrupt,
.config_intr = genphy_no_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
},
};
module_phy_driver(realtek_drvs);
static const struct mdio_device_id __maybe_unused realtek_tbl[] = {
{ PHY_ID_MATCH_VENDOR(0x001cc800) },
{ }
};
MODULE_DEVICE_TABLE(mdio, realtek_tbl);
|
