1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2005-2006 Micronas USA Inc.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/list.h>
#include <linux/unistd.h>
#include <linux/time.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include "go7007-priv.h"
/********************* Driver for on-board I2C adapter *********************/
/* #define GO7007_I2C_DEBUG */
#define SPI_I2C_ADDR_BASE 0x1400
#define STATUS_REG_ADDR (SPI_I2C_ADDR_BASE + 0x2)
#define I2C_CTRL_REG_ADDR (SPI_I2C_ADDR_BASE + 0x6)
#define I2C_DEV_UP_ADDR_REG_ADDR (SPI_I2C_ADDR_BASE + 0x7)
#define I2C_LO_ADDR_REG_ADDR (SPI_I2C_ADDR_BASE + 0x8)
#define I2C_DATA_REG_ADDR (SPI_I2C_ADDR_BASE + 0x9)
#define I2C_CLKFREQ_REG_ADDR (SPI_I2C_ADDR_BASE + 0xa)
#define I2C_STATE_MASK 0x0007
#define I2C_READ_READY_MASK 0x0008
/* There is only one I2C port on the TW2804 that feeds all four GO7007 VIPs
* on the Adlink PCI-MPG24, so access is shared between all of them. */
static DEFINE_MUTEX(adlink_mpg24_i2c_lock);
static int go7007_i2c_xfer(struct go7007 *go, u16 addr, int read,
u16 command, int flags, u8 *data)
{
int i, ret = -EIO;
u16 val;
if (go->status == STATUS_SHUTDOWN)
return -ENODEV;
#ifdef GO7007_I2C_DEBUG
if (read)
dev_dbg(go->dev, "go7007-i2c: reading 0x%02x on 0x%02x\n",
command, addr);
else
dev_dbg(go->dev,
"go7007-i2c: writing 0x%02x to 0x%02x on 0x%02x\n",
*data, command, addr);
#endif
mutex_lock(&go->hw_lock);
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) {
/* Bridge the I2C port on this GO7007 to the shared bus */
mutex_lock(&adlink_mpg24_i2c_lock);
go7007_write_addr(go, 0x3c82, 0x0020);
}
/* Wait for I2C adapter to be ready */
for (i = 0; i < 10; ++i) {
if (go7007_read_addr(go, STATUS_REG_ADDR, &val) < 0)
goto i2c_done;
if (!(val & I2C_STATE_MASK))
break;
msleep(100);
}
if (i == 10) {
dev_err(go->dev, "go7007-i2c: I2C adapter is hung\n");
goto i2c_done;
}
/* Set target register (command) */
go7007_write_addr(go, I2C_CTRL_REG_ADDR, flags);
go7007_write_addr(go, I2C_LO_ADDR_REG_ADDR, command);
/* If we're writing, send the data and target address and we're done */
if (!read) {
go7007_write_addr(go, I2C_DATA_REG_ADDR, *data);
go7007_write_addr(go, I2C_DEV_UP_ADDR_REG_ADDR,
(addr << 9) | (command >> 8));
ret = 0;
goto i2c_done;
}
/* Otherwise, we're reading. First clear i2c_rx_data_rdy. */
if (go7007_read_addr(go, I2C_DATA_REG_ADDR, &val) < 0)
goto i2c_done;
/* Send the target address plus read flag */
go7007_write_addr(go, I2C_DEV_UP_ADDR_REG_ADDR,
(addr << 9) | 0x0100 | (command >> 8));
/* Wait for i2c_rx_data_rdy */
for (i = 0; i < 10; ++i) {
if (go7007_read_addr(go, STATUS_REG_ADDR, &val) < 0)
goto i2c_done;
if (val & I2C_READ_READY_MASK)
break;
msleep(100);
}
if (i == 10) {
dev_err(go->dev, "go7007-i2c: I2C adapter is hung\n");
goto i2c_done;
}
/* Retrieve the read byte */
if (go7007_read_addr(go, I2C_DATA_REG_ADDR, &val) < 0)
goto i2c_done;
*data = val;
ret = 0;
i2c_done:
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) {
/* Isolate the I2C port on this GO7007 from the shared bus */
go7007_write_addr(go, 0x3c82, 0x0000);
mutex_unlock(&adlink_mpg24_i2c_lock);
}
mutex_unlock(&go->hw_lock);
return ret;
}
static int go7007_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
struct go7007 *go = i2c_get_adapdata(adapter);
if (size != I2C_SMBUS_BYTE_DATA)
return -EIO;
return go7007_i2c_xfer(go, addr, read_write == I2C_SMBUS_READ, command,
flags & I2C_CLIENT_SCCB ? 0x10 : 0x00, &data->byte);
}
/* VERY LIMITED I2C master xfer function -- only needed because the
* SMBus functions only support 8-bit commands and the SAA7135 uses
* 16-bit commands. The I2C interface on the GO7007, as limited as
* it is, does support this mode. */
static int go7007_i2c_master_xfer(struct i2c_adapter *adapter,
struct i2c_msg msgs[], int num)
{
struct go7007 *go = i2c_get_adapdata(adapter);
int i;
for (i = 0; i < num; ++i) {
/* We can only do two things here -- write three bytes, or
* write two bytes and read one byte. */
if (msgs[i].len == 2) {
if (i + 1 == num || msgs[i].addr != msgs[i + 1].addr ||
(msgs[i].flags & I2C_M_RD) ||
!(msgs[i + 1].flags & I2C_M_RD) ||
msgs[i + 1].len != 1)
return -EIO;
if (go7007_i2c_xfer(go, msgs[i].addr, 1,
(msgs[i].buf[0] << 8) | msgs[i].buf[1],
0x01, &msgs[i + 1].buf[0]) < 0)
return -EIO;
++i;
} else if (msgs[i].len == 3) {
if (msgs[i].flags & I2C_M_RD)
return -EIO;
if (msgs[i].len != 3)
return -EIO;
if (go7007_i2c_xfer(go, msgs[i].addr, 0,
(msgs[i].buf[0] << 8) | msgs[i].buf[1],
0x01, &msgs[i].buf[2]) < 0)
return -EIO;
} else
return -EIO;
}
return num;
}
static u32 go7007_functionality(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_BYTE_DATA;
}
static const struct i2c_algorithm go7007_algo = {
.smbus_xfer = go7007_smbus_xfer,
.master_xfer = go7007_i2c_master_xfer,
.functionality = go7007_functionality,
};
static struct i2c_adapter go7007_adap_templ = {
.owner = THIS_MODULE,
.name = "WIS GO7007SB",
.algo = &go7007_algo,
};
int go7007_i2c_init(struct go7007 *go)
{
memcpy(&go->i2c_adapter, &go7007_adap_templ,
sizeof(go7007_adap_templ));
go->i2c_adapter.dev.parent = go->dev;
i2c_set_adapdata(&go->i2c_adapter, go);
if (i2c_add_adapter(&go->i2c_adapter) < 0) {
dev_err(go->dev,
"go7007-i2c: error: i2c_add_adapter failed\n");
return -1;
}
return 0;
}
|
