1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
|
/*
* STMicroelectronics gyroscopes driver
*
* Copyright 2012-2013 STMicroelectronics Inc.
*
* Denis Ciocca <denis.ciocca@st.com>
*
* Licensed under the GPL-2.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/buffer.h>
#include <linux/iio/common/st_sensors.h>
#include "st_gyro.h"
#define ST_GYRO_NUMBER_DATA_CHANNELS 3
/* DEFAULT VALUE FOR SENSORS */
#define ST_GYRO_DEFAULT_OUT_X_L_ADDR 0x28
#define ST_GYRO_DEFAULT_OUT_Y_L_ADDR 0x2a
#define ST_GYRO_DEFAULT_OUT_Z_L_ADDR 0x2c
/* FULLSCALE */
#define ST_GYRO_FS_AVL_250DPS 250
#define ST_GYRO_FS_AVL_500DPS 500
#define ST_GYRO_FS_AVL_2000DPS 2000
/* CUSTOM VALUES FOR SENSOR 1 */
#define ST_GYRO_1_WAI_EXP 0xd3
#define ST_GYRO_1_ODR_ADDR 0x20
#define ST_GYRO_1_ODR_MASK 0xc0
#define ST_GYRO_1_ODR_AVL_100HZ_VAL 0x00
#define ST_GYRO_1_ODR_AVL_200HZ_VAL 0x01
#define ST_GYRO_1_ODR_AVL_400HZ_VAL 0x02
#define ST_GYRO_1_ODR_AVL_800HZ_VAL 0x03
#define ST_GYRO_1_PW_ADDR 0x20
#define ST_GYRO_1_PW_MASK 0x08
#define ST_GYRO_1_FS_ADDR 0x23
#define ST_GYRO_1_FS_MASK 0x30
#define ST_GYRO_1_FS_AVL_250_VAL 0x00
#define ST_GYRO_1_FS_AVL_500_VAL 0x01
#define ST_GYRO_1_FS_AVL_2000_VAL 0x02
#define ST_GYRO_1_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
#define ST_GYRO_1_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
#define ST_GYRO_1_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
#define ST_GYRO_1_BDU_ADDR 0x23
#define ST_GYRO_1_BDU_MASK 0x80
#define ST_GYRO_1_DRDY_IRQ_ADDR 0x22
#define ST_GYRO_1_DRDY_IRQ_INT2_MASK 0x08
#define ST_GYRO_1_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 2 */
#define ST_GYRO_2_WAI_EXP 0xd4
#define ST_GYRO_2_ODR_ADDR 0x20
#define ST_GYRO_2_ODR_MASK 0xc0
#define ST_GYRO_2_ODR_AVL_95HZ_VAL 0x00
#define ST_GYRO_2_ODR_AVL_190HZ_VAL 0x01
#define ST_GYRO_2_ODR_AVL_380HZ_VAL 0x02
#define ST_GYRO_2_ODR_AVL_760HZ_VAL 0x03
#define ST_GYRO_2_PW_ADDR 0x20
#define ST_GYRO_2_PW_MASK 0x08
#define ST_GYRO_2_FS_ADDR 0x23
#define ST_GYRO_2_FS_MASK 0x30
#define ST_GYRO_2_FS_AVL_250_VAL 0x00
#define ST_GYRO_2_FS_AVL_500_VAL 0x01
#define ST_GYRO_2_FS_AVL_2000_VAL 0x02
#define ST_GYRO_2_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
#define ST_GYRO_2_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
#define ST_GYRO_2_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
#define ST_GYRO_2_BDU_ADDR 0x23
#define ST_GYRO_2_BDU_MASK 0x80
#define ST_GYRO_2_DRDY_IRQ_ADDR 0x22
#define ST_GYRO_2_DRDY_IRQ_INT2_MASK 0x08
#define ST_GYRO_2_MULTIREAD_BIT true
static const struct iio_chan_spec st_gyro_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
ST_GYRO_DEFAULT_OUT_X_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
ST_GYRO_DEFAULT_OUT_Y_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
ST_GYRO_DEFAULT_OUT_Z_L_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct st_sensors st_gyro_sensors[] = {
{
.wai = ST_GYRO_1_WAI_EXP,
.sensors_supported = {
[0] = L3G4200D_GYRO_DEV_NAME,
[1] = LSM330DL_GYRO_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
.addr = ST_GYRO_1_ODR_ADDR,
.mask = ST_GYRO_1_ODR_MASK,
.odr_avl = {
{ 100, ST_GYRO_1_ODR_AVL_100HZ_VAL, },
{ 200, ST_GYRO_1_ODR_AVL_200HZ_VAL, },
{ 400, ST_GYRO_1_ODR_AVL_400HZ_VAL, },
{ 800, ST_GYRO_1_ODR_AVL_800HZ_VAL, },
},
},
.pw = {
.addr = ST_GYRO_1_PW_ADDR,
.mask = ST_GYRO_1_PW_MASK,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = ST_GYRO_1_FS_ADDR,
.mask = ST_GYRO_1_FS_MASK,
.fs_avl = {
[0] = {
.num = ST_GYRO_FS_AVL_250DPS,
.value = ST_GYRO_1_FS_AVL_250_VAL,
.gain = ST_GYRO_1_FS_AVL_250_GAIN,
},
[1] = {
.num = ST_GYRO_FS_AVL_500DPS,
.value = ST_GYRO_1_FS_AVL_500_VAL,
.gain = ST_GYRO_1_FS_AVL_500_GAIN,
},
[2] = {
.num = ST_GYRO_FS_AVL_2000DPS,
.value = ST_GYRO_1_FS_AVL_2000_VAL,
.gain = ST_GYRO_1_FS_AVL_2000_GAIN,
},
},
},
.bdu = {
.addr = ST_GYRO_1_BDU_ADDR,
.mask = ST_GYRO_1_BDU_MASK,
},
.drdy_irq = {
.addr = ST_GYRO_1_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK,
},
.multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
.bootime = 2,
},
{
.wai = ST_GYRO_2_WAI_EXP,
.sensors_supported = {
[0] = L3GD20_GYRO_DEV_NAME,
[1] = L3GD20H_GYRO_DEV_NAME,
[2] = LSM330D_GYRO_DEV_NAME,
[3] = LSM330DLC_GYRO_DEV_NAME,
[4] = L3G4IS_GYRO_DEV_NAME,
[5] = LSM330_GYRO_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
.addr = ST_GYRO_2_ODR_ADDR,
.mask = ST_GYRO_2_ODR_MASK,
.odr_avl = {
{ 95, ST_GYRO_2_ODR_AVL_95HZ_VAL, },
{ 190, ST_GYRO_2_ODR_AVL_190HZ_VAL, },
{ 380, ST_GYRO_2_ODR_AVL_380HZ_VAL, },
{ 760, ST_GYRO_2_ODR_AVL_760HZ_VAL, },
},
},
.pw = {
.addr = ST_GYRO_2_PW_ADDR,
.mask = ST_GYRO_2_PW_MASK,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.enable_axis = {
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = ST_GYRO_2_FS_ADDR,
.mask = ST_GYRO_2_FS_MASK,
.fs_avl = {
[0] = {
.num = ST_GYRO_FS_AVL_250DPS,
.value = ST_GYRO_2_FS_AVL_250_VAL,
.gain = ST_GYRO_2_FS_AVL_250_GAIN,
},
[1] = {
.num = ST_GYRO_FS_AVL_500DPS,
.value = ST_GYRO_2_FS_AVL_500_VAL,
.gain = ST_GYRO_2_FS_AVL_500_GAIN,
},
[2] = {
.num = ST_GYRO_FS_AVL_2000DPS,
.value = ST_GYRO_2_FS_AVL_2000_VAL,
.gain = ST_GYRO_2_FS_AVL_2000_GAIN,
},
},
},
.bdu = {
.addr = ST_GYRO_2_BDU_ADDR,
.mask = ST_GYRO_2_BDU_MASK,
},
.drdy_irq = {
.addr = ST_GYRO_2_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK,
},
.multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
.bootime = 2,
},
};
static int st_gyro_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *ch, int *val,
int *val2, long mask)
{
int err;
struct st_sensor_data *gdata = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
err = st_sensors_read_info_raw(indio_dev, ch, val);
if (err < 0)
goto read_error;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
*val2 = gdata->current_fullscale->gain;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
read_error:
return err;
}
static int st_gyro_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
int err;
switch (mask) {
case IIO_CHAN_INFO_SCALE:
err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
break;
default:
err = -EINVAL;
}
return err;
}
static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_anglvel_scale_available);
static struct attribute *st_gyro_attributes[] = {
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_anglvel_scale_available.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
NULL,
};
static const struct attribute_group st_gyro_attribute_group = {
.attrs = st_gyro_attributes,
};
static const struct iio_info gyro_info = {
.driver_module = THIS_MODULE,
.attrs = &st_gyro_attribute_group,
.read_raw = &st_gyro_read_raw,
.write_raw = &st_gyro_write_raw,
};
#ifdef CONFIG_IIO_TRIGGER
static const struct iio_trigger_ops st_gyro_trigger_ops = {
.owner = THIS_MODULE,
.set_trigger_state = ST_GYRO_TRIGGER_SET_STATE,
};
#define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops)
#else
#define ST_GYRO_TRIGGER_OPS NULL
#endif
int st_gyro_common_probe(struct iio_dev *indio_dev,
struct st_sensors_platform_data *pdata)
{
int err;
struct st_sensor_data *gdata = iio_priv(indio_dev);
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &gyro_info;
err = st_sensors_check_device_support(indio_dev,
ARRAY_SIZE(st_gyro_sensors), st_gyro_sensors);
if (err < 0)
goto st_gyro_common_probe_error;
gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
gdata->multiread_bit = gdata->sensor->multi_read_bit;
indio_dev->channels = gdata->sensor->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
gdata->current_fullscale = (struct st_sensor_fullscale_avl *)
&gdata->sensor->fs.fs_avl[0];
gdata->odr = gdata->sensor->odr.odr_avl[0].hz;
err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
goto st_gyro_common_probe_error;
if (gdata->get_irq_data_ready(indio_dev) > 0) {
err = st_gyro_allocate_ring(indio_dev);
if (err < 0)
goto st_gyro_common_probe_error;
err = st_sensors_allocate_trigger(indio_dev,
ST_GYRO_TRIGGER_OPS);
if (err < 0)
goto st_gyro_probe_trigger_error;
}
err = iio_device_register(indio_dev);
if (err)
goto st_gyro_device_register_error;
return err;
st_gyro_device_register_error:
if (gdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_gyro_probe_trigger_error:
if (gdata->get_irq_data_ready(indio_dev) > 0)
st_gyro_deallocate_ring(indio_dev);
st_gyro_common_probe_error:
return err;
}
EXPORT_SYMBOL(st_gyro_common_probe);
void st_gyro_common_remove(struct iio_dev *indio_dev)
{
struct st_sensor_data *gdata = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
if (gdata->get_irq_data_ready(indio_dev) > 0) {
st_sensors_deallocate_trigger(indio_dev);
st_gyro_deallocate_ring(indio_dev);
}
}
EXPORT_SYMBOL(st_gyro_common_remove);
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
MODULE_DESCRIPTION("STMicroelectronics gyroscopes driver");
MODULE_LICENSE("GPL v2");
|
