1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/mtd/partitions.h>
#include <linux/sizes.h>
#include <linux/phy.h>
#include <linux/serial_8250.h>
#include <linux/stmmac.h>
#include <linux/usb/ehci_pdriver.h>
#include <platform.h>
#include <loongson1.h>
#include <dma.h>
#include <nand.h>
/* 8250/16550 compatible UART */
#define LS1X_UART(_id) \
{ \
.mapbase = LS1X_UART ## _id ## _BASE, \
.irq = LS1X_UART ## _id ## _IRQ, \
.iotype = UPIO_MEM, \
.flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
.type = PORT_16550A, \
}
static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
LS1X_UART(0),
LS1X_UART(1),
LS1X_UART(2),
LS1X_UART(3),
{},
};
struct platform_device ls1x_uart_pdev = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = ls1x_serial8250_pdata,
},
};
void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
{
struct clk *clk;
struct plat_serial8250_port *p;
clk = clk_get(&pdev->dev, pdev->name);
if (IS_ERR(clk)) {
pr_err("unable to get %s clock, err=%ld",
pdev->name, PTR_ERR(clk));
return;
}
clk_prepare_enable(clk);
for (p = pdev->dev.platform_data; p->flags != 0; ++p)
p->uartclk = clk_get_rate(clk);
}
/* Synopsys Ethernet GMAC */
static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
.phy_mask = 0,
};
static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
.pbl = 1,
};
int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
{
struct plat_stmmacenet_data *plat_dat = NULL;
u32 val;
val = __raw_readl(LS1X_MUX_CTRL1);
#if defined(CONFIG_LOONGSON1_LS1B)
plat_dat = dev_get_platdata(&pdev->dev);
if (plat_dat->bus_id) {
__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
GMAC1_USE_UART0, LS1X_MUX_CTRL0);
switch (plat_dat->phy_interface) {
case PHY_INTERFACE_MODE_RGMII:
val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
break;
case PHY_INTERFACE_MODE_MII:
val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
break;
default:
pr_err("unsupported mii mode %d\n",
plat_dat->phy_interface);
return -ENOTSUPP;
}
val &= ~GMAC1_SHUT;
} else {
switch (plat_dat->phy_interface) {
case PHY_INTERFACE_MODE_RGMII:
val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
break;
case PHY_INTERFACE_MODE_MII:
val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
break;
default:
pr_err("unsupported mii mode %d\n",
plat_dat->phy_interface);
return -ENOTSUPP;
}
val &= ~GMAC0_SHUT;
}
__raw_writel(val, LS1X_MUX_CTRL1);
#elif defined(CONFIG_LOONGSON1_LS1C)
plat_dat = dev_get_platdata(&pdev->dev);
val &= ~PHY_INTF_SELI;
if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
val |= 0x4 << PHY_INTF_SELI_SHIFT;
__raw_writel(val, LS1X_MUX_CTRL1);
val = __raw_readl(LS1X_MUX_CTRL0);
__raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
#endif
return 0;
}
static struct plat_stmmacenet_data ls1x_eth0_pdata = {
.bus_id = 0,
.phy_addr = -1,
#if defined(CONFIG_LOONGSON1_LS1B)
.phy_interface = PHY_INTERFACE_MODE_MII,
#elif defined(CONFIG_LOONGSON1_LS1C)
.phy_interface = PHY_INTERFACE_MODE_RMII,
#endif
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
.has_gmac = 1,
.tx_coe = 1,
.rx_queues_to_use = 1,
.tx_queues_to_use = 1,
.init = ls1x_eth_mux_init,
};
static struct resource ls1x_eth0_resources[] = {
[0] = {
.start = LS1X_GMAC0_BASE,
.end = LS1X_GMAC0_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "macirq",
.start = LS1X_GMAC0_IRQ,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device ls1x_eth0_pdev = {
.name = "stmmaceth",
.id = 0,
.num_resources = ARRAY_SIZE(ls1x_eth0_resources),
.resource = ls1x_eth0_resources,
.dev = {
.platform_data = &ls1x_eth0_pdata,
},
};
#ifdef CONFIG_LOONGSON1_LS1B
static struct plat_stmmacenet_data ls1x_eth1_pdata = {
.bus_id = 1,
.phy_addr = -1,
.phy_interface = PHY_INTERFACE_MODE_MII,
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
.has_gmac = 1,
.tx_coe = 1,
.rx_queues_to_use = 1,
.tx_queues_to_use = 1,
.init = ls1x_eth_mux_init,
};
static struct resource ls1x_eth1_resources[] = {
[0] = {
.start = LS1X_GMAC1_BASE,
.end = LS1X_GMAC1_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "macirq",
.start = LS1X_GMAC1_IRQ,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device ls1x_eth1_pdev = {
.name = "stmmaceth",
.id = 1,
.num_resources = ARRAY_SIZE(ls1x_eth1_resources),
.resource = ls1x_eth1_resources,
.dev = {
.platform_data = &ls1x_eth1_pdata,
},
};
#endif /* CONFIG_LOONGSON1_LS1B */
/* GPIO */
static struct resource ls1x_gpio0_resources[] = {
[0] = {
.start = LS1X_GPIO0_BASE,
.end = LS1X_GPIO0_BASE + SZ_4 - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device ls1x_gpio0_pdev = {
.name = "ls1x-gpio",
.id = 0,
.num_resources = ARRAY_SIZE(ls1x_gpio0_resources),
.resource = ls1x_gpio0_resources,
};
static struct resource ls1x_gpio1_resources[] = {
[0] = {
.start = LS1X_GPIO1_BASE,
.end = LS1X_GPIO1_BASE + SZ_4 - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device ls1x_gpio1_pdev = {
.name = "ls1x-gpio",
.id = 1,
.num_resources = ARRAY_SIZE(ls1x_gpio1_resources),
.resource = ls1x_gpio1_resources,
};
/* USB EHCI */
static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
static struct resource ls1x_ehci_resources[] = {
[0] = {
.start = LS1X_EHCI_BASE,
.end = LS1X_EHCI_BASE + SZ_32K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = LS1X_EHCI_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct usb_ehci_pdata ls1x_ehci_pdata = {
};
struct platform_device ls1x_ehci_pdev = {
.name = "ehci-platform",
.id = -1,
.num_resources = ARRAY_SIZE(ls1x_ehci_resources),
.resource = ls1x_ehci_resources,
.dev = {
.dma_mask = &ls1x_ehci_dmamask,
.platform_data = &ls1x_ehci_pdata,
},
};
/* Real Time Clock */
void __init ls1x_rtc_set_extclk(struct platform_device *pdev)
{
u32 val = __raw_readl(LS1X_RTC_CTRL);
if (!(val & RTC_EXTCLK_OK))
__raw_writel(val | RTC_EXTCLK_EN, LS1X_RTC_CTRL);
}
struct platform_device ls1x_rtc_pdev = {
.name = "ls1x-rtc",
.id = -1,
};
/* Watchdog */
static struct resource ls1x_wdt_resources[] = {
{
.start = LS1X_WDT_BASE,
.end = LS1X_WDT_BASE + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device ls1x_wdt_pdev = {
.name = "ls1x-wdt",
.id = -1,
.num_resources = ARRAY_SIZE(ls1x_wdt_resources),
.resource = ls1x_wdt_resources,
};
|
