1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
|
.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
====================================
Marvell OcteonTx2 RVU Kernel Drivers
====================================
Copyright (c) 2020 Marvell International Ltd.
Contents
========
- `Overview`_
- `Drivers`_
- `Basic packet flow`_
- `Devlink health reporters`_
Overview
========
Resource virtualization unit (RVU) on Marvell's OcteonTX2 SOC maps HW
resources from the network, crypto and other functional blocks into
PCI-compatible physical and virtual functions. Each functional block
again has multiple local functions (LFs) for provisioning to PCI devices.
RVU supports multiple PCIe SRIOV physical functions (PFs) and virtual
functions (VFs). PF0 is called the administrative / admin function (AF)
and has privileges to provision RVU functional block's LFs to each of the
PF/VF.
RVU managed networking functional blocks
- Network pool or buffer allocator (NPA)
- Network interface controller (NIX)
- Network parser CAM (NPC)
- Schedule/Synchronize/Order unit (SSO)
- Loopback interface (LBK)
RVU managed non-networking functional blocks
- Crypto accelerator (CPT)
- Scheduled timers unit (TIM)
- Schedule/Synchronize/Order unit (SSO)
Used for both networking and non networking usecases
Resource provisioning examples
- A PF/VF with NIX-LF & NPA-LF resources works as a pure network device
- A PF/VF with CPT-LF resource works as a pure crypto offload device.
RVU functional blocks are highly configurable as per software requirements.
Firmware setups following stuff before kernel boots
- Enables required number of RVU PFs based on number of physical links.
- Number of VFs per PF are either static or configurable at compile time.
Based on config, firmware assigns VFs to each of the PFs.
- Also assigns MSIX vectors to each of PF and VFs.
- These are not changed after kernel boot.
Drivers
=======
Linux kernel will have multiple drivers registering to different PF and VFs
of RVU. Wrt networking there will be 3 flavours of drivers.
Admin Function driver
---------------------
As mentioned above RVU PF0 is called the admin function (AF), this driver
supports resource provisioning and configuration of functional blocks.
Doesn't handle any I/O. It sets up few basic stuff but most of the
funcionality is achieved via configuration requests from PFs and VFs.
PF/VFs communicates with AF via a shared memory region (mailbox). Upon
receiving requests AF does resource provisioning and other HW configuration.
AF is always attached to host kernel, but PFs and their VFs may be used by host
kernel itself, or attached to VMs or to userspace applications like
DPDK etc. So AF has to handle provisioning/configuration requests sent
by any device from any domain.
AF driver also interacts with underlying firmware to
- Manage physical ethernet links ie CGX LMACs.
- Retrieve information like speed, duplex, autoneg etc
- Retrieve PHY EEPROM and stats.
- Configure FEC, PAM modes
- etc
From pure networking side AF driver supports following functionality.
- Map a physical link to a RVU PF to which a netdev is registered.
- Attach NIX and NPA block LFs to RVU PF/VF which provide buffer pools, RQs, SQs
for regular networking functionality.
- Flow control (pause frames) enable/disable/config.
- HW PTP timestamping related config.
- NPC parser profile config, basically how to parse pkt and what info to extract.
- NPC extract profile config, what to extract from the pkt to match data in MCAM entries.
- Manage NPC MCAM entries, upon request can frame and install requested packet forwarding rules.
- Defines receive side scaling (RSS) algorithms.
- Defines segmentation offload algorithms (eg TSO)
- VLAN stripping, capture and insertion config.
- SSO and TIM blocks config which provide packet scheduling support.
- Debugfs support, to check current resource provising, current status of
NPA pools, NIX RQ, SQ and CQs, various stats etc which helps in debugging issues.
- And many more.
Physical Function driver
------------------------
This RVU PF handles IO, is mapped to a physical ethernet link and this
driver registers a netdev. This supports SR-IOV. As said above this driver
communicates with AF with a mailbox. To retrieve information from physical
links this driver talks to AF and AF gets that info from firmware and responds
back ie cannot talk to firmware directly.
Supports ethtool for configuring links, RSS, queue count, queue size,
flow control, ntuple filters, dump PHY EEPROM, config FEC etc.
Virtual Function driver
-----------------------
There are two types VFs, VFs that share the physical link with their parent
SR-IOV PF and the VFs which work in pairs using internal HW loopback channels (LBK).
Type1:
- These VFs and their parent PF share a physical link and used for outside communication.
- VFs cannot communicate with AF directly, they send mbox message to PF and PF
forwards that to AF. AF after processing, responds back to PF and PF forwards
the reply to VF.
- From functionality point of view there is no difference between PF and VF as same type
HW resources are attached to both. But user would be able to configure few stuff only
from PF as PF is treated as owner/admin of the link.
Type2:
- RVU PF0 ie admin function creates these VFs and maps them to loopback block's channels.
- A set of two VFs (VF0 & VF1, VF2 & VF3 .. so on) works as a pair ie pkts sent out of
VF0 will be received by VF1 and viceversa.
- These VFs can be used by applications or virtual machines to communicate between them
without sending traffic outside. There is no switch present in HW, hence the support
for loopback VFs.
- These communicate directly with AF (PF0) via mbox.
Except for the IO channels or links used for packet reception and transmission there is
no other difference between these VF types. AF driver takes care of IO channel mapping,
hence same VF driver works for both types of devices.
Basic packet flow
=================
Ingress
-------
1. CGX LMAC receives packet.
2. Forwards the packet to the NIX block.
3. Then submitted to NPC block for parsing and then MCAM lookup to get the destination RVU device.
4. NIX LF attached to the destination RVU device allocates a buffer from RQ mapped buffer pool of NPA block LF.
5. RQ may be selected by RSS or by configuring MCAM rule with a RQ number.
6. Packet is DMA'ed and driver is notified.
Egress
------
1. Driver prepares a send descriptor and submits to SQ for transmission.
2. The SQ is already configured (by AF) to transmit on a specific link/channel.
3. The SQ descriptor ring is maintained in buffers allocated from SQ mapped pool of NPA block LF.
4. NIX block transmits the pkt on the designated channel.
5. NPC MCAM entries can be installed to divert pkt onto a different channel.
Devlink health reporters
========================
NPA Reporters
-------------
The NPA reporters are responsible for reporting and recovering the following group of errors
1. GENERAL events
- Error due to operation of unmapped PF.
- Error due to disabled alloc/free for other HW blocks (NIX, SSO, TIM, DPI and AURA).
2. ERROR events
- Fault due to NPA_AQ_INST_S read or NPA_AQ_RES_S write.
- AQ Doorbell Error.
3. RAS events
- RAS Error Reporting for NPA_AQ_INST_S/NPA_AQ_RES_S.
4. RVU events
- Error due to unmapped slot.
Sample Output
-------------
~# devlink health
pci/0002:01:00.0:
reporter hw_npa_intr
state healthy error 2872 recover 2872 last_dump_date 2020-12-10 last_dump_time 09:39:09 grace_period 0 auto_recover true auto_dump true
reporter hw_npa_gen
state healthy error 2872 recover 2872 last_dump_date 2020-12-11 last_dump_time 04:43:04 grace_period 0 auto_recover true auto_dump true
reporter hw_npa_err
state healthy error 2871 recover 2871 last_dump_date 2020-12-10 last_dump_time 09:39:17 grace_period 0 auto_recover true auto_dump true
reporter hw_npa_ras
state healthy error 0 recover 0 last_dump_date 2020-12-10 last_dump_time 09:32:40 grace_period 0 auto_recover true auto_dump true
Each reporter dumps the
- Error Type
- Error Register value
- Reason in words
For eg:
~# devlink health dump show pci/0002:01:00.0 reporter hw_npa_gen
NPA_AF_GENERAL:
NPA General Interrupt Reg : 1
NIX0: free disabled RX
~# devlink health dump show pci/0002:01:00.0 reporter hw_npa_intr
NPA_AF_RVU:
NPA RVU Interrupt Reg : 1
Unmap Slot Error
~# devlink health dump show pci/0002:01:00.0 reporter hw_npa_err
NPA_AF_ERR:
NPA Error Interrupt Reg : 4096
AQ Doorbell Error
|
