1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/usb251xb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip USB 2.0 Hi-Speed Hub Controller
maintainers:
- Richard Leitner <richard.leitner@skidata.com>
properties:
compatible:
enum:
- microchip,usb2422
- microchip,usb2512b
- microchip,usb2512bi
- microchip,usb2513b
- microchip,usb2513bi
- microchip,usb2514b
- microchip,usb2514bi
- microchip,usb2517
- microchip,usb2517i
- microchip,usb251xb
reg:
maxItems: 1
reset-gpios:
description: |
Should specify the gpio for hub reset
vdd-supply:
description: |
Should specify the phandle to the regulator supplying vdd
skip-config:
$ref: /schemas/types.yaml#/definitions/flag
description: |
Skip Hub configuration, but only send the USB-Attach command
vendor-id:
$ref: /schemas/types.yaml#/definitions/uint16
default: 0x0424
description: |
Set USB Vendor ID of the hub
product-id:
$ref: /schemas/types.yaml#/definitions/uint16
description: |
Set USB Product ID of the hub
device-id:
$ref: /schemas/types.yaml#/definitions/uint16
default: 0x0bb3
description: |
Set USB Device ID of the hub
language-id:
$ref: /schemas/types.yaml#/definitions/uint16
default: 0x0000
description: |
Set USB Language ID
manufacturer:
$ref: /schemas/types.yaml#/definitions/string
description: |
Set USB Manufacturer string (max 31 characters long)
product:
$ref: /schemas/types.yaml#/definitions/string
description: |
Set USB Product string (max 31 characters long)
serial:
$ref: /schemas/types.yaml#/definitions/string
description: |
Set USB Serial string (max 31 characters long)
bus-powered:
$ref: /schemas/types.yaml#/definitions/flag
description: |
selects between self- and bus-powered operation
(boolean, default is self-powered)
self-powered:
$ref: /schemas/types.yaml#/definitions/flag
description: |
selects between self- and bus-powered operation
(boolean, default is self-powered)
disable-hi-speed:
$ref: /schemas/types.yaml#/definitions/flag
description: |
disable USB Hi-Speed support (boolean)
multi-tt:
$ref: /schemas/types.yaml#/definitions/flag
description: |
selects between multi- and single-transaction-translator
(boolean, default is multi-tt)
single-tt:
$ref: /schemas/types.yaml#/definitions/flag
description: |
selects between multi- and single-transaction-translator
(boolean, default is multi-tt)
disable-eop:
$ref: /schemas/types.yaml#/definitions/flag
description: |
disable End of Packet generation in full-speed mode (boolean)
ganged-sensing:
$ref: /schemas/types.yaml#/definitions/flag
description: |
select over-current sense type in self-powered mode
(boolean, default is individual)
individual-sensing:
$ref: /schemas/types.yaml#/definitions/flag
description: |
select over-current sense type in self-powered mode
(boolean, default is individual)
ganged-port-switching:
$ref: /schemas/types.yaml#/definitions/flag
description: |
select port power switching mode (boolean, default is individual)
individual-port-switching:
$ref: /schemas/types.yaml#/definitions/flag
description: |
select port power switching mode (boolean, default is individual)
dynamic-power-switching:
$ref: /schemas/types.yaml#/definitions/flag
description: |
enable auto-switching from self- to bus-powered operation if the
local power source is removed or unavailable (boolean)
oc-delay-us:
enum: [100, 4000, 8000, 16000]
default: 8000
description: |
Delay time (in microseconds) for filtering the over-current sense
inputs. If an invalid value is given, the default is used instead.
compound-device:
$ref: /schemas/types.yaml#/definitions/flag
description: |
indicate the hub is part of a compound device (boolean)
port-mapping-mode:
$ref: /schemas/types.yaml#/definitions/flag
description: |
enable port mapping mode (boolean)
led-usb-mode:
$ref: /schemas/types.yaml#/definitions/flag
description: |
led usb/speed indication mode selection (boolean, default is speed mode)
led-speed-mode:
$ref: /schemas/types.yaml#/definitions/flag
description: |
led usb/speed indication mode selection (boolean, default is speed mode)
string-support:
$ref: /schemas/types.yaml#/definitions/flag
description: |
enable string descriptor support (required for manufacturer, product
and serial string configuration)
non-removable-ports:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: |
Should specify the ports which have a non-removable device connected.
sp-disabled-ports:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: |
Specifies the ports which will be self-power disabled
bp-disabled-ports:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: |
Specifies the ports which will be bus-power disabled
sp-max-total-current-microamp:
maximum: 100000
default: 1000
description: |
Specifies max current consumed by the hub from VBUS when
operating in self-powered hub. It includes the hub silicon
along with all associated circuitry including a permanently
attached peripheral.
bp-max-total-current-microamp:
maximum: 510000
default: 100000
description: |
Specifies max current consumed by the hub from VBUS when
operating in self-powered hub. It includes the hub silicon
along with all associated circuitry including a permanently
attached peripheral.
sp-max-removable-current-microamp:
maximum: 100000
default: 1000
description: |
Specifies max current consumed by the hub from VBUS when
operating in self-powered hub. It includes the hub silicon
along with all associated circuitry excluding a permanently
attached peripheral.
bp-max-removable-current-microamp:
maximum: 510000
default: 100000
description: |
Specifies max current consumed by the hub from VBUS when
operating in self-powered hub. It includes the hub silicon
along with all associated circuitry excluding a permanently
attached peripheral.
power-on-time-ms:
maximum: 510
default: 100
description: |
Specifies the time it takes from the time the host initiates the
power-on sequence to a port until the port has adequate power.
swap-dx-lanes:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: |
Specifies the ports which will swap the differential-pair (D+/D-),
default is not-swapped.
additionalProperties: false
required:
- compatible
- reg
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
usb-hub@2c {
compatible = "microchip,usb2512b";
reg = <0x2c>;
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
usb-hub@2d {
compatible = "microchip,usb2514b";
reg = <0x2d>;
vendor-id = /bits/ 16 <0x0000>;
product-id = /bits/ 16 <0x0000>;
string-support;
manufacturer = "Foo";
product = "Foo-Bar";
serial = "1234567890A";
/* correct misplaced usb connectors on port 1,2 */
swap-dx-lanes = <1 2>;
};
};
|
