1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/wlf,arizona.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
maintainers:
- patches@opensource.cirrus.com
description: |
These devices are audio SoCs with extensive digital capabilities and a range
of analogue I/O.
This document lists sound specific bindings, see the primary binding
document ../mfd/arizona.yaml
properties:
'#sound-dai-cells':
description:
The first cell indicating the audio interface.
const: 1
wlf,inmode:
description:
A list of INn_MODE register values, where n is the number of input
signals. Valid values are 0 (Differential), 1 (Single-ended) and
2 (Digital Microphone). If absent, INn_MODE registers set to 0 by
default. If present, values must be specified less than or equal
to the number of input signals. If values less than the number of
input signals, elements that have not been specified are set to 0 by
default. Entries are <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280,
wm8997) and <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
items:
minimum: 0
maximum: 2
default: 0
wlf,out-mono:
description:
A list of boolean values indicating whether each output is mono
or stereo. Position within the list indicates the output affected
(eg. First entry in the list corresponds to output 1). A non-zero
value indicates a mono output. If present, the number of values
should be less than or equal to the number of outputs, if less values
are supplied the additional outputs will be treated as stereo.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 6
items:
minimum: 0
maximum: 1
default: 0
wlf,dmic-ref:
description:
DMIC reference voltage source for each input, can be selected from
either MICVDD or one of the MICBIAS's, defines (ARIZONA_DMIC_xxxx)
are provided in dt-bindings/mfd/arizona.h. If present, the number
of values should be less than or equal to the number of inputs,
unspecified inputs will use the chip default.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
items:
minimum: 0
maximum: 3
default: 0
wlf,max-channels-clocked:
description:
The maximum number of channels to be clocked on each AIF, useful for
I2S systems with multiple data lines being mastered. Specify one
cell for each AIF to be configured, specify zero for AIFs that should
be handled normally. If present, number of cells must be less than
or equal to the number of AIFs. If less than the number of AIFs, for
cells that have not been specified the corresponding AIFs will be
treated as default setting.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 3
items:
default: 0
wlf,spk-fmt:
description:
PDM speaker data format, must contain 2 cells (OUT5 and OUT6). See
the datasheet for values. The second cell is ignored for codecs that
do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 2
maxItems: 2
wlf,spk-mute:
description:
PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). See
the datasheet for values. The second cell is ignored for codecs that
do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 2
maxItems: 2
wlf,out-volume-limit:
description:
The volume limit value that should be applied to each output
channel. See the datasheet for exact values. Channels are specified
in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 12
|
