1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
|
Qualcomm WCNSS Peripheral Image Loader
This document defines the binding for a component that loads and boots firmware
on the Qualcomm WCNSS core.
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,riva-pil",
"qcom,pronto-v1-pil",
"qcom,pronto-v2-pil"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: must specify the base address and size of the CCU, DXE and
PMU register blocks
- reg-names:
Usage: required
Value type: <stringlist>
Definition: must be "ccu", "dxe", "pmu"
- interrupts-extended:
Usage: required
Value type: <prop-encoded-array>
Definition: must list the watchdog and fatal IRQs and may specify the
ready, handover and stop-ack IRQs
- interrupt-names:
Usage: required
Value type: <stringlist>
Definition: should be "wdog", "fatal", optionally followed by "ready",
"handover", "stop-ack"
- vddmx-supply: (deprecated for qcom,pronto-v1/2-pil)
- vddcx-supply: (deprecated for qcom,pronto-v1/2-pil)
- vddpx-supply:
Usage: required
Value type: <phandle>
Definition: reference to the regulators to be held on behalf of the
booting of the WCNSS core
- power-domains:
Usage: required (for qcom,pronto-v1/2-pil)
Value type: <phandle>
Definition: reference to the power domains to be held on behalf of the
booting of the WCNSS core
- power-domain-names:
Usage: required (for qcom,pronto-v1/2-pil)
Value type: <stringlist>
Definition: must be "cx", "mx"
- qcom,smem-states:
Usage: optional
Value type: <prop-encoded-array>
Definition: reference to the SMEM state used to indicate to WCNSS that
it should shut down
- qcom,smem-state-names:
Usage: optional
Value type: <stringlist>
Definition: should be "stop"
- memory-region:
Usage: required
Value type: <prop-encoded-array>
Definition: reference to reserved-memory node for the remote processor
see ../reserved-memory/reserved-memory.txt
= SUBNODES
A required subnode of the WCNSS PIL is used to describe the attached rf module
and its resource dependencies. It is described by the following properties:
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,wcn3620",
"qcom,wcn3660",
"qcom,wcn3660b",
"qcom,wcn3680"
- clocks:
Usage: required
Value type: <prop-encoded-array>
Definition: should specify the xo clock and optionally the rf clock
- clock-names:
Usage: required
Value type: <stringlist>
Definition: should be "xo", optionally followed by "rf"
- vddxo-supply:
- vddrfa-supply:
- vddpa-supply:
- vdddig-supply:
Usage: required
Value type: <phandle>
Definition: reference to the regulators to be held on behalf of the
booting of the WCNSS core
The wcnss node can also have an subnode named "smd-edge" that describes the SMD
edge, channels and devices related to the WCNSS.
See ../soc/qcom/qcom,smd.txt for details on how to describe the SMD edge.
= EXAMPLE
The following example describes the resources needed to boot control the WCNSS,
with attached WCN3680, as it is commonly found on MSM8974 boards.
pronto@fb204000 {
compatible = "qcom,pronto-v2-pil";
reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
reg-names = "ccu", "dxe", "pmu";
interrupts-extended = <&intc 0 149 1>,
<&wcnss_smp2p_slave 0 0>,
<&wcnss_smp2p_slave 1 0>,
<&wcnss_smp2p_slave 2 0>,
<&wcnss_smp2p_slave 3 0>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
power-domains = <&rpmpd MSM8974_VDDCX>, <&rpmpd MSM8974_VDDMX>;
power-domain-names = "cx", "mx";
vddpx-supply = <&pm8941_s3>;
qcom,smem-states = <&wcnss_smp2p_out 0>;
qcom,smem-state-names = "stop";
memory-region = <&wcnss_region>;
pinctrl-names = "default";
pinctrl-0 = <&wcnss_pin_a>;
iris {
compatible = "qcom,wcn3680";
clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>;
clock-names = "xo", "rf";
vddxo-supply = <&pm8941_l6>;
vddrfa-supply = <&pm8941_l11>;
vddpa-supply = <&pm8941_l19>;
vdddig-supply = <&pm8941_s3>;
};
smd-edge {
interrupts = <0 142 1>;
qcom,ipc = <&apcs 8 17>;
qcom,smd-edge = <6>;
qcom,remote-pid = <4>;
label = "pronto";
wcnss {
compatible = "qcom,wcnss";
qcom,smd-channels = "WCNSS_CTRL";
qcom,mmio = <&pronto>;
bt {
compatible = "qcom,wcnss-bt";
};
};
};
};
|
