1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
ACT88xx regulators
-------------------
Required properties:
- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
- reg: I2C slave address
Optional properties:
- system-power-controller: Telling whether or not this pmic is controlling
the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
- active-semi,vsel-high: Indicates the VSEL pin is high.
If this property is missing, assume the VSEL pin is low(0).
Optional input supply properties:
- for act8600:
- vp1-supply: The input supply for DCDC_REG1
- vp2-supply: The input supply for DCDC_REG2
- vp3-supply: The input supply for DCDC_REG3
- inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8
SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies.
- for act8846:
- vp1-supply: The input supply for REG1
- vp2-supply: The input supply for REG2
- vp3-supply: The input supply for REG3
- vp4-supply: The input supply for REG4
- inl1-supply: The input supply for REG5, REG6 and REG7
- inl2-supply: The input supply for REG8 and LDO_REG9
- inl3-supply: The input supply for REG10, REG11 and REG12
- for act8865:
- vp1-supply: The input supply for DCDC_REG1
- vp2-supply: The input supply for DCDC_REG2
- vp3-supply: The input supply for DCDC_REG3
- inl45-supply: The input supply for LDO_REG1 and LDO_REG2
- inl67-supply: The input supply for LDO_REG3 and LDO_REG4
Any standard regulator properties can be used to configure the single regulator.
regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified
for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h
file.
The valid names for regulators are:
- for act8846:
REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
- for act8865:
DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
- for act8600:
DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
LDO_REG8, LDO_REG9, LDO_REG10,
Example:
--------
#include <dt-bindings/regulator/active-semi,8865-regulator.h>
i2c1: i2c@f0018000 {
pmic: act8865@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
active-semi,vsel-high;
regulators {
vcc_1v8_reg: DCDC_REG1 {
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcc_1v2_reg: DCDC_REG2 {
regulator-name = "VCC_1V2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
<ACT8865_REGULATOR_MODE_LOWPOWER>;
regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-min-microvolt = <1150000>;
regulator-suspend-max-microvolt = <1150000>;
regulator-changeable-in-suspend;
regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
};
};
vcc_3v3_reg: DCDC_REG3 {
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vddana_reg: LDO_REG1 {
regulator-name = "VDDANA";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
<ACT8865_REGULATOR_MODE_LOWPOWER>;
regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vddfuse_reg: LDO_REG2 {
regulator-name = "FUSE_2V5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
};
};
};
|
