1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
Analog Devices AD5758 DAC device driver
Required properties for the AD5758:
- compatible: Must be "adi,ad5758"
- reg: SPI chip select number for the device
- spi-max-frequency: Max SPI frequency to use (< 50000000)
- spi-cpha: is the only mode that is supported
Required properties:
- adi,dc-dc-mode: Mode of operation of the dc-to-dc converter
Dynamic Power Control (DPC)
In this mode, the AD5758 circuitry senses the output
voltage and dynamically regulates the supply voltage,
VDPC+, to meet compliance requirements plus an optimized
headroom voltage for the output buffer.
Programmable Power Control (PPC)
In this mode, the VDPC+ voltage is user-programmable to
a fixed level that needs to accommodate the maximum output
load required.
The output of the DAC core is either converted to a
current or voltage output at the VIOUT pin. Only one mode
can be enabled at any one time.
The following values are currently supported:
* 1: DPC current mode
* 2: DPC voltage mode
* 3: PPC current mode
Depending on the selected output mode (voltage or current) one of the
two properties must
be present:
- adi,range-microvolt: Voltage output range
The array of voltage output ranges must contain two fields:
* <0 5000000>: 0 V to 5 V voltage range
* <0 10000000>: 0 V to 10 V voltage range
* <(-5000000) 5000000>: ±5 V voltage range
* <(-10000000) 10000000>: ±10 V voltage range
- adi,range-microamp: Current output range
The array of current output ranges must contain two fields:
* <0 20000>: 0 mA to 20 mA current range
* <0 24000>: 0 mA to 24 mA current range
* <4 24000>: 4 mA to 20 mA current range
* <(-20000) 20000>: ±20 mA current range
* <(-24000) 24000>: ±24 mA current range
* <(-1000) 22000>: −1 mA to +22 mA current range
Optional properties:
- reset-gpios : GPIO spec for the RESET pin. If specified, it will be
asserted during driver probe.
- adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit
The following values are currently supported [uA]:
* 150000
* 200000
* 250000
* 300000
* 350000
* 400000
- adi,slew-time-us: The time it takes for the output to reach the
full scale [uS]
The supported range is between 133us up to 1023984375us
AD5758 Example:
dac@0 {
compatible = "adi,ad5758";
reg = <0>;
spi-max-frequency = <1000000>;
spi-cpha;
reset-gpios = <&gpio 22 0>;
adi,dc-dc-mode = <2>;
adi,range-microvolt = <0 10000000>;
adi,dc-dc-ilim-microamp = <200000>;
adi,slew-time-us = <125000>;
};
|
