blob: 6b0b452acef02bc920d9547f399eab8dea58c053 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
|
Binding for ST's CPUFreq driver
===============================
ST's CPUFreq driver attempts to read 'process' and 'version' attributes
from the SoC, then supplies the OPP framework with 'prop' and 'supported
hardware' information respectively. The framework is then able to read
the DT and operate in the usual way.
Frequency Scaling only
----------------------
No vendor specific driver required for this.
Located in CPU's node:
- operating-points : [See: ../power/opp-v1.yaml]
Example [safe]
--------------
cpus {
cpu@0 {
/* kHz uV */
operating-points = <1500000 0
1200000 0
800000 0
500000 0>;
};
};
Dynamic Voltage and Frequency Scaling (DVFS)
--------------------------------------------
This requires the ST CPUFreq driver to supply 'process' and 'version' info.
Located in CPU's node:
- operating-points-v2 : [See ../power/opp-v2.yaml]
Example [unsafe]
----------------
cpus {
cpu@0 {
operating-points-v2 = <&cpu0_opp_table>;
};
};
cpu0_opp_table: opp_table {
compatible = "operating-points-v2";
/* ############################################################### */
/* # WARNING: Do not attempt to copy/replicate these nodes, # */
/* # they are only to be supplied by the bootloader !!! # */
/* ############################################################### */
opp0 {
/* Major Minor Substrate */
/* 2 all all */
opp-supported-hw = <0x00000004 0xffffffff 0xffffffff>;
opp-hz = /bits/ 64 <1500000000>;
clock-latency-ns = <10000000>;
opp-microvolt-pcode0 = <1200000>;
opp-microvolt-pcode1 = <1200000>;
opp-microvolt-pcode2 = <1200000>;
opp-microvolt-pcode3 = <1200000>;
opp-microvolt-pcode4 = <1170000>;
opp-microvolt-pcode5 = <1140000>;
opp-microvolt-pcode6 = <1100000>;
opp-microvolt-pcode7 = <1070000>;
};
opp1 {
/* Major Minor Substrate */
/* all all all */
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
opp-hz = /bits/ 64 <1200000000>;
clock-latency-ns = <10000000>;
opp-microvolt-pcode0 = <1110000>;
opp-microvolt-pcode1 = <1150000>;
opp-microvolt-pcode2 = <1100000>;
opp-microvolt-pcode3 = <1080000>;
opp-microvolt-pcode4 = <1040000>;
opp-microvolt-pcode5 = <1020000>;
opp-microvolt-pcode6 = <980000>;
opp-microvolt-pcode7 = <930000>;
};
};
|
