| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The card identifier should contain only safe ASCII characters. The isalnum()
returns true also for characters for non-ASCII characters.
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4135
Link: https://lore.kernel.org/linux-sound/yk3WTvKkwheOon_LzZlJ43PPInz6byYfBzpKkbasww1yzuiMRqn7n6Y8vZcXB-xwFCu_vb8hoNjv7DTNwH5TWjpEuiVsyn9HPCEXqwF4120=@protonmail.com/
Cc: stable@vger.kernel.org
Reported-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241002194649.1944696-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We'll re-use the existing rwlock for the protection of control list
lookup, too, and now rename it to a more generic name.
This is a preliminary change, only the rename of the struct field
here, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-2-tiwai@suse.de
|
|
The card-specific debugfs entries are removed at the last stage of
card free phase, and it's performed after synchronization of the
closes of all opened fds. This works fine for most cases, but it can
be potentially problematic for a hotplug device like USB-audio. Due
to the nature of snd_card_free_when_closed(), the card free isn't
called immediately after the driver removal for a hotplug device, but
it's left until the last fd is closed. It implies that the card
debugfs entries also remain. Meanwhile, when a new device is inserted
before the last close and the very same card slot is assigned, the
driver tries to create the card debugfs root again on the very same
path. This conflicts with the remaining entry, and results in the
kernel warning such as:
debugfs: Directory 'card0' with parent 'sound' already present!
with the missing debugfs entry afterwards.
For avoiding such conflicts, remove debugfs entries at the device
disconnection phase instead. The jack kctl debugfs entries get
removed in snd_jack_dev_disconnect() instead of each kctl
private_free.
Fixes: 2d670ea2bd53 ("ALSA: jack: implement software jack injection via debugfs")
Link: https://lore.kernel.org/r/20240524151256.32521-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We used '#ifdef MODULE' for judging whether the system supports the
sound module or not, and /proc/asound/modules is created only when
'#ifdef MODULE' is true. The check is not really appropriate, though,
because the flag means only for the sound core and the drivers are
still allowed to be built as modules even if 'MODULE' is not set in
sound/core/init.c.
For fixing the inconsistency, replace those ifdefs with 'ifdef
CONFIG_MODULES'. One place for a NULL module check is rewritten with
IS_MODULE(CONFIG_SND) to be more intuitive. It can't be changed to
CONFIG_MODULES; otherwise it would hit a WARN_ON() incorrectly.
This is a slight behavior change; the modules proc entry appears now
no matter whether the sound core is built-in or not as long as modules
are enabled on the kernel in general. This can't be avoided due to
the nature of kernel builds.
Link: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240522070442.17786-2-tiwai@suse.de
|
|
The commit 81033c6b584b ("ALSA: core: Warn on empty module")
introduced a WARN_ON() for a NULL module pointer passed at snd_card
object creation, and it also wraps the code around it with '#ifdef
MODULE'. This works in most cases, but the devils are always in
details. "MODULE" is defined when the target code (i.e. the sound
core) is built as a module; but this doesn't mean that the caller is
also built-in or not. Namely, when only the sound core is built-in
(CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m),
the passed module pointer is ignored even if it's non-NULL, and
card->module remains as NULL. This would result in the missing module
reference up/down at the device open/close, leading to a race with the
code execution after the module removal.
For addressing the bug, move the assignment of card->module again out
of ifdef. The WARN_ON() is still wrapped with ifdef because the
module can be really NULL when all sound drivers are built-in.
Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would
lead to a false-positive NULL module check. Admittedly it won't catch
perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no
real problem as it's only for debugging, and the condition is pretty
rare.
Fixes: 81033c6b584b ("ALSA: core: Warn on empty module")
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Closes: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240522070442.17786-1-tiwai@suse.de
|
|
Since the recent code change, the conditional build with CONFIG_PM is
calling only snd_power_sync_ref(). As a dummy function is provided
for this function, we can get rid of CONFIG_PM gracefully now.
Link: https://lore.kernel.org/r/20240510125128.6058-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In snd_card_disconnect(), we set card->shutdown flag at the beginning,
call callbacks and do sync for card->power_ref_sleep waiters at the
end. The callback may delete a kctl element, and this can lead to a
deadlock when the device was in the suspended state. Namely:
* A process waits for the power up at snd_power_ref_and_wait() in
snd_ctl_info() or read/write() inside card->controls_rwsem.
* The system gets disconnected meanwhile, and the driver tries to
delete a kctl via snd_ctl_remove*(); it tries to take
card->controls_rwsem again, but this is already locked by the
above. Since the sleeper isn't woken up, this deadlocks.
An easy fix is to wake up sleepers before processing the driver
disconnect callbacks but right after setting the card->shutdown flag.
Then all sleepers will abort immediately, and the code flows again.
So, basically this patch moves the wait_event() call at the right
timing. While we're at it, just to be sure, call wait_event_all()
instead of wait_event(), although we don't use exclusive events on
this queue for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218816
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240510101424.6279-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-12-tiwai@suse.de
|
|
There is no need to use temporary string for the debugfs directory name as
we can use the device name of the card.
This change will also fixes the following compiler warning/error (W=1):
sound/core/init.c: In function ‘snd_card_init’:
sound/core/init.c:367:28: error: ‘%d’ directive writing between 1 and 10 bytes into a region of size 4 [-Werror=format-overflow=]
367 | sprintf(name, "card%d", idx);
| ^~
sound/core/init.c:367:23: note: directive argument in the range [0, 2147483646]
367 | sprintf(name, "card%d", idx);
| ^~~~~~~~
sound/core/init.c:367:9: note: ‘sprintf’ output between 6 and 15 bytes into a destination of size 8
367 | sprintf(name, "card%d", idx);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The idx is guarantied to be less than SNDRV_CARDS (max 256 or 8) by the
code in snd_card_init(), however the compiler does not see that.
The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230912110113.3166-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now all users of snd_device_intialize() are gone, let's drop it.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Introduce a new helper, snd_device_alloc(), for allocating a struct
device that is bound with the sound class. It's a replacement of
snd_device_initialize().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: alsa-devel@alsa-project.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230620175633.641141-2-gregkh@linuxfoundation.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The function returns 0 unconditionally. Make it return void instead and
simplify all callers accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Geoff Levand <geoff@infradead.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230207191907.467756-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
All callers from other files ignore the return value of this function.
And it can only ever return a non-zero value if the parameter card is NULL.
This cannot happen in snd_card_free() as card was dereferenced just before
snd_card_free_when_closed() is called. So the error handling can be dropped
there.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Geoff Levand <geoff@infradead.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230207191907.467756-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
All callers from other files ignore the return value of this function.
And it can only ever return a non-zero value if the parameter card is NULL.
Move the check for card being NULL into snd_card_free_when_closed() to keep
the previous behaviour. Note this isn't necessary for
snd_card_disconnect_sync() because if card was NULL in there the dereference
of card for dev_err() would oops the kernel. Replace this by an oops
triggered by the dereference of card for spin_lock_irq().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Geoff Levand <geoff@infradead.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230207191907.467756-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
During the code change to add the support for devres-managed card
instance, we put an explicit kfree(card) call at the error path in
snd_card_new(). This is needed for the early error path before the
card is initialized with the device, but is rather superfluous and
causes a double-free at the error path after the card instance is
initialized, as the destructor of the card object already contains a
kfree() call.
This patch fixes the double-free situation by removing the superfluous
kfree(). Meanwhile we need to call kfree() explicitly for the early
error path, so it's added there instead.
Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation")
Reported-by: Rondreis <linhaoguo86@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com
Link: https://lore.kernel.org/r/20220919123516.28222-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
sysfs_emit() is a new helper to simplify the sysfs string output.
Replace the open-code with this new helper.
Link: https://lore.kernel.org/r/20220801165639.26030-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for the
remaining ALSA core API functions.
Link: https://lore.kernel.org/r/20220713104759.4365-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The control elements are managed in a single linked list and we
traverse the whole list for matching each numid or ctl id per every
inquiry of a control element. This is OK-ish for a small number of
elements but obviously it doesn't scale. Especially the matching with
the ctl id takes time because it checks each field of the snd_ctl_id
element, e.g. the name string is matched with strcmp().
This patch adds the hash tables with Xarray for improving the lookup
speed of a control element. There are two xarray tables added to the
card; one for numid and another for ctl id. For the numid, we use the
numid as the index, while for the ctl id, we calculate a hash key.
The lookup is done via a single xa_load() execution. As long as the
given control element is found on the Xarray table, that's fine, we
can give back a quick lookup result. The problem is when no entry
hits on the table, and for this case, we have a slight optimization.
Namely, the driver checks whether we had a collision on Xarray table,
and do a fallback search (linear lookup of the full entries) only if a
hash key collision happened beforehand.
So, in theory, the inquiry for a non-existing element might take still
time even with this patch in a worst case, but this must be pretty
rare.
The feature is enabled via CONFIG_SND_CTL_FAST_LOOKUP, which is turned
on as default. For simplicity, the option can be turned off only when
CONFIG_EXPERT is set ("You are expert? Then you manage 1000 knobs").
Link: https://lore.kernel.org/r/20211028130027.18764-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20220609180504.775-1-tiwai@suse.de
Link: https://lore.kernel.org/all/cover.1653813866.git.quic_rbankapu@quicinc.com/
Link: https://lore.kernel.org/r/20220610064537.18660-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a small helper function to handle the error path more easily
when an error happens during the probe for the device with the
device-managed card. Since devres releases in the reverser order of
the creations, usually snd_card_free() gets called at the last in the
probe error path unless it already reached snd_card_register() calls.
Due to this nature, when a driver expects the resource releases in
card->private_free, this might be called too lately.
As a workaround, one should call the probe like:
static int __some_probe(...) { // do real probe.... }
static int some_probe(...)
{
return snd_card_free_on_error(dev, __some_probe(dev, ...));
}
so that the snd_card_free() is called explicitly at the beginning of
the error path from the probe.
This function will be used in the upcoming fixes to address the
regressions by devres usages.
Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220412093141.8008-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use wait_event_cmd() macro and simplify snd_power_ref_wait()
implementation. This may also cover possible races in the current
open code, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220119091050.30125-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
At the transition to the devres-managed card release, we've put the
check of double-free at trigger_card_release(). But this wasn't
enough, as the code path calls snd_card_free() again, and it would
lead to the doubly snd_card_free() calls.
Actually the v1 patch was correct to handle this, but I forgot that
corner case and moved the check to the more obvious place as I thought
it's clearer. But, as usual, devils live in details.
This patch corrects the check of the double-free to the right place,
with a bit more comments.
Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation")
Link: https://lore.kernel.org/r/20210731083446.26680-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As a second step for preliminary to widen the devres usages among
sound drivers, this patch adds a new ALSA core API function,
snd_devm_card_new(), to create a snd_card object via devres.
When a card object is created by this new function, snd_card_free() is
called automatically and the card object resource gets released at the
device unbinding time.
However, the story isn't that simple. A caveat is that we have to
call snd_card_free() at the very first of the whole resource release
procedure, in order to assure that the all exposed devices on
user-space are deleted and sync with processes accessing those devices
before releasing resources.
For achieving it, snd_card_register() adds a new devres action to
trigger snd_card_free() automatically when the given card object is a
"managed" one. Since usually snd_card_register() is the last step of
the initialization, this should work in most cases.
With all these tricks, some drivers can get rid of the whole driver
remove callback code.
About a bit of implementation details: the patch adds two new flags to
snd_card object: managed and releasing. The former indicates that the
object was created via snd_devm_card_new(), and the latter is used for
avoiding the double-free of snd_card_free() calls. Both flags are
fairly internal and likely uninteresting to normal users.
Link: https://lore.kernel.org/r/20210715075941.23332-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are a few places doing assignments in if condition in ALSA core
code, which is a bad coding style that may confuse readers and
occasionally lead to bugs.
This patch is merely for coding-style fixes, no functional changes.
Link: https://lore.kernel.org/r/20210608140540.17885-54-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210526121828.8460-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The power_state argument of snd_power_wait() is superfluous, receiving
only SNDRV_POWER_STATE_D0. Let's drop it in all callers for
simplicity.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210523090920.15345-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Although the power state check is performed in various places (e.g. at
the entrance of quite a few ioctls), there can be still some pending
tasks that already went into the ioctl handler or other ops, and those
may access the hardware even after the power state check. For
example, kcontrol access ioctl paths that call info/get/put callbacks
may update the hardware registers. If a system wants to assure the
free from such hw access (like the case of PCI rescan feature we're
going to implement in future), this situation must be avoided, and we
have to sync such in-flight tasks finishing beforehand.
For that purpose, this patch introduces a few new things in core code:
- A refcount, power_ref, and a wait queue, power_ref_sleep, to the
card object
- A few new helpers, snd_power_ref(), snd_power_unref(),
snd_power_ref_and_wait(), and snd_power_sync_ref()
In the code paths that call kctl info/read/write/tlv ops, we check the
power state with the newly introduced snd_power_ref_and_wait(). This
function also takes the card.power_ref refcount for tracking this
in-flight task. Once after the access finishes, snd_power_unref() is
called to released the refcount in return. So the driver can sync via
snd_power_sync_ref() assuring that all in-flight tasks have been
finished.
As of this patch, snd_power_sync_ref() is called only at
snd_card_disconnect(), but it'll be used in other places in future.
Note that atomic_t is used for power_ref intentionally instead of
refcount_t. It's because of the design of refcount_t type; refcount_t
cannot be zero-based, and it cannot do dec_and_test() call for
multiple times, hence it's not suitable for our purpose.
Also, this patch changes snd_power_wait() to accept only
SNDRV_CTL_POWER_D0, which is the only value that makes sense.
In later patch, the snd_power_wait() calls will be cleaned up.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
modification in commit 2a3f7221acdd ("ALSA: core: Fix card races between
register and disconnect") resulting in this problem.
Fixes: 2a3f7221acdd ("ALSA: core: Fix card races between register and disconnect")
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/1616989007-34429-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The PCM core should perform the sync for the pending stop operations
at disconnection. Otherwise it may lead to unexpected access.
Currently the old user of sync_stop, USB-audio driver, has its own
sync, so this isn't needed, but it's better to guarantee the sync in
the PCM core level.
This patch adds the missing sync_stop call at PCM disconnection
callback. It also assures the IRQ sync if it's specified in the
card. snd_pcm_sync_stop() is slightly modified to be called also for
any PCM substream object now.
Fixes: 1e850beea278 ("ALSA: pcm: Add the support for sync-stop operation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203656.15959-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The commit 2d670ea2bd53 ("ALSA: jack: implement software jack
injection via debugfs") introduced a debugfs root for each sound card
object. The debugfs entry gets removed at the card removal, too, but
it turned out that debugfs_remove() is called at a wrong place; it's
after the card object gets freed, hence it leads to use-after-free.
Fix it by moving the debugfs_remove() at the right place, the
destructor of the card device.
Fixes: 2d670ea2bd53 ("ALSA: jack: implement software jack injection via debugfs")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/161228343605.1150.8862281636043446562@build.alporthouse.com
Link: https://lore.kernel.org/r/20210202225629.1965-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This change adds audio jack injection feature through debugfs, with
this feature, we could validate alsa userspace changes by injecting
plugin or plugout events to the non-phantom audio jacks.
With this change, the sound core will build the folders
$debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled.
And if users also enable the SND_JACK_INJECTION_DEBUG, the jack
injection nodes will be built in the folder cardN like below:
$tree $debugfs_mount_dir/sound
$debugfs_mount_dir/sound
├── card0
│ ├── HDMI_DP_pcm_10_Jack
│ │ ├── jackin_inject
│ │ ├── kctl_id
│ │ ├── mask_bits
│ │ ├── status
│ │ ├── sw_inject_enable
│ │ └── type
...
│ └── HDMI_DP_pcm_9_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── card1
├── HDMI_DP_pcm_5_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
...
├── Headphone_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── Headset_Mic_Jack
├── jackin_inject
├── kctl_id
├── mask_bits
├── status
├── sw_inject_enable
└── type
The nodes kctl_id, mask_bits, status and type are read-only, users
could check jack or jack_kctl's information through them.
The nodes sw_inject_enable and jackin_inject are directly used for
injection. The sw_inject_enable is read-write, users could check if
software injection is enabled or not on this jack, and users could
echo 1 or 0 to enable or disable software injection on this jack. Once
the injection is enabled, the jack will not change by hardware events
anymore, once the injection is disabled, the jack will restore the
last reported hardware events to the jack. The jackin_inject is
write-only, if the injection is enabled, users could echo 1 or 0 to
this node to inject plugin or plugout events to this jack.
For the detailed usage information on these nodes, please refer to
Documentation/sound/designs/jack-injection.rst.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
strlcpy is deprecated. see: Documentation/process/deprecated.rst
Change the calls that do not use the strlcpy return value to the
preferred strscpy.
Done with cocci script:
@@
expression e1, e2, e3;
@@
- strlcpy(
+ strscpy(
e1, e2, e3);
This cocci script leaves the instances where the return value is
used unchanged.
After this patch, sound/ has 3 uses of strlcpy() that need to be
manually inspected for conversion and changed one day.
$ git grep -w strlcpy sound/
sound/usb/card.c: len = strlcpy(card->longname, s, sizeof(card->longname));
sound/usb/mixer.c: return strlcpy(buf, p->name, buflen);
sound/usb/mixer.c: return strlcpy(buf, p->names[index], buflen);
Miscellenea:
o Remove trailing whitespace in conversion of sound/core/hwdep.c
Link: https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/22b393d1790bb268769d0bab7bacf0866dcb0c14.camel@perches.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove redundant comments
Signed-off-by: YangHui <yanghui.def@gmail.com>
Link: https://lore.kernel.org/r/1608531727-5433-1-git-send-email-yanghui.def@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Follow recommendation in Documentation/scheduler/completion.rst and use
macro to declare local 'struct completion'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902212133.30964-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The module argument passed to snd_card_new() must be a valid non-NULL
pointer when the module support is enabled. Since ASoC driver passes
the argument from each snd_soc_card definition, one may forget to set
the owner field and lead to a NULL module easily.
For catching such an overlook, add a WARN_ON() in snd_card_new().
Also, put the card->module assignment in the ifdef block for a very
minor optimization.
Link: https://lore.kernel.org/r/20200624160300.21703-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently, the available buffer allocation size for a PCM stream
depends on the preallocated size; when a buffer has been preallocated,
the max buffer size is set to that size, so that application won't
re-allocate too much memory. OTOH, when no preallocation is done,
each substream may allocate arbitrary size of buffers as long as
snd_pcm_hardware.buffer_bytes_max allows -- which can be quite high,
HD-audio sets 1GB there.
It means that the system may consume a high amount of pages for PCM
buffers, and they are pinned and never swapped out. This can lead to
OOM easily.
For avoiding such a situation, this patch adds the upper limit per
card. Each snd_pcm_lib_malloc_pages() and _free_pages() calls are
tracked and it will return an error if the total amount of buffers
goes over the defined upper limit. The default value is set to 32MB,
which should be really large enough for usual operations.
If larger buffers are needed for any specific usage, it can be
adjusted (also dynamically) via snd_pcm.max_alloc_per_card option.
Setting zero there means no chceck is performed, and again, unlimited
amount of buffers are allowed.
Link: https://lore.kernel.org/r/20200120124423.11862-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Many PCI and other drivers performs snd_pcm_period_elapsed() simply in
its interrupt handler, so the sync_stop operation is just to call
synchronize_irq(). Instead of putting this call multiple times,
introduce the common card->sync_irq field. When this field is set,
PCM core performs synchronize_irq() for sync-stop operation. Each
driver just needs to copy its local IRQ number to card->sync_irq, and
that's all we need.
Link: https://lore.kernel.org/r/20191117085308.23915-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The snd_cards[] array holds the card pointers that have been currently
registered, and it's exported for the external modules that may need
to refer a card object. But accessing to this array can be racy
against the driver probe or removal, as the card registration or free
may happen concurrently.
This patch gets rid of the direct access to snd_cards[] array and
provides a helper function to give the card object from the index
number with a refcount management. Then the caller can access to the
given card object safely, and releases it via snd_card_unref().
While we're at it, add a proper comment to snd_card_unref() and make
it an inlined function for type-safety, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is a small race window in the card disconnection code that
allows the registration of another card with the very same card id.
This leads to a warning in procfs creation as caught by syzkaller.
The problem is that we delete snd_cards and snd_cards_lock entries at
the very beginning of the disconnection procedure. This makes the
slot available to be assigned for another card object while the
disconnection procedure is being processed. Then it becomes possible
to issue a procfs registration with the existing file name although we
check the conflict beforehand.
The fix is simply to move the snd_cards and snd_cards_lock clearances
at the end of the disconnection procedure. The references to these
entries are merely either from the global proc files like
/proc/asound/cards or from the card registration / disconnection, so
it should be fine to shift at the very end.
Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The creation of card's id proc file can be moved gracefully into
info.c. Also, the assignment of card->proc_id is superfluous and can
be dropped. So let's do it.
Basically this is no functional change but code refactoring, but one
potential behavior change is that now it returns properly the error
code from snd_info_card_register(), which is a good thing (tm).
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It's referred only in snd_card_id_read() which can receive the card
object via private_data.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Convert the S_<FOO> symbolic permissions to their octal equivalents as
using octal and not symbolic permissions is preferred by many as more
readable.
see: https://lkml.org/lkml/2016/8/2/1945
Done with automated conversion via:
$ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...>
Miscellanea:
o Wrapped one multi-line call to a single line
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The show() method should use scnprintf() not snprintf() because snprintf()
may returns a value that exceeds its second argument.
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In case of user unbind ALSA driver during playing back / capturing,
each driver needs to stop and remove it correctly. One note here is
that we can't cancel from remove function in such case, because
unbind operation doesn't check return value from remove function.
So, we *must* stop and remove in this case.
For this purpose, we need to sync (= wait) until the all top-level
operations are canceled at remove function.
For example, snd_card_free() processes the disconnection procedure at
first, then waits for the completion. That's how the hot-unplug works
safely. It's implemented, at least, in the top-level driver removal.
Now for the lower level driver, we need a similar strategy. Notify to
the toplevel for hot-unplug (disconnect in ALSA), and sync with the
stop operation, then continue the rest of its own remove procedure.
This patch adds snd_card_disconnect_sync(), and driver can use it from
remove function.
Note: the "lower level" driver here refers to a middle layer driver
(e.g. ASoC components) that can be unbound freely during operation.
Most of legacy ALSA helper drivers don't have such a problem because
they can't be unbound.
Note#2: snd_card_disconnect_sync() merely calls snd_card_disconnect()
and syncs with closing all pending files. It takes only the files
opened by user-space into account, and doesn't care about object
refcounts. (The latter is handled by snd_card_free() completion call,
BTW.) Also, the function doesn't free resources by itself.
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently we're taking power_lock at each card component for assuring
the power-up sequence, but it doesn't help anything in the
implementation at the moment: it just serializes unnecessarily the
callers, but it doesn't protect about the power state change itself.
It used to have some usefulness in the early days where we managed the
PM manually. But now the suspend/resume core procedure is beyond our
hands, and power_lock lost its meaning.
This patch drops the power_lock from allover the places.
There shouldn't be any issues by this change, as it's no helper
regarding the power state change. Rather we'll get better performance
by removing the serialization; which is the only slight concern of any
behavior change, but it can't be a showstopper, after all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
At a previous commit, concurrent requests for TLV data are maintained
exclusively between read requests and write/command requests. TLV
callback handlers in each driver has no risk from concurrent access for
reference/change.
In current implementation, 'struct snd_card' has a mutex to control
concurrent accesses to user-defined element sets. This commit obsoletes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
