| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This fixes the following trace by reworking the locking of l2cap_conn
so instead of only locking when changing the chan_l list this promotes
chan_lock to a general lock of l2cap_conn so whenever it is being held
it would prevents the likes of l2cap_conn_del to run:
list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:61!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__list_del_entry_valid include/linux/list.h:124 [inline]
__list_del_entry include/linux/list.h:215 [inline]
list_del_rcu include/linux/rculist.h:168 [inline]
hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858
l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline]
kref_put include/linux/kref.h:65 [inline]
l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830
l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377
l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416
__sock_release net/socket.c:642 [inline]
sock_close+0xbc/0x240 net/socket.c:1393
__fput+0x3e9/0x9f0 fs/file_table.c:448
task_work_run+0x24f/0x310 kernel/task_work.c:227
ptrace_notify+0x2d2/0x380 kernel/signal.c:2522
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7aceeaf449
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449
RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004
RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
l3mdev_l3_out() can be called without RCU being held:
raw_sendmsg()
ip_push_pending_frames()
ip_send_skb()
ip_local_out()
__ip_local_out()
l3mdev_ip_out()
Add rcu_read_lock() / rcu_read_unlock() pair to avoid
a potential UAF.
Fixes: a8e3e1a9f020 ("net: l3mdev: Add hook to output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip_dst_mtu_maybe_forward() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: f87c10a8aa1e8 ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip4_dst_hoplimit() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: fa50d974d104 ("ipv4: Namespaceify ip_default_ttl sysctl knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev->nd_net can change, readers should either
use rcu_read_lock() or RTNL.
We currently use a generic helper, dev_net() with
no debugging support. We probably have many hidden bugs.
Add dev_net_rcu() helper for callers using rcu_read_lock()
protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of tc offload, when user space queries the kernel for tc action
statistics, tc will query the offloaded statistics from device drivers.
Among other statistics, drivers are expected to pass the number of
packets that hit the action since the last query as a 64-bit number.
Unfortunately, tc treats the number of packets as a 32-bit number,
leading to truncation and incorrect statistics when the number of
packets since the last query exceeds 0xffffffff:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 58 sec used 0 sec
Action statistics:
Sent 1133877034176 bytes 536959475 pkt (dropped 0, overlimits 0 requeues 0)
[...]
According to the above, 2111-byte packets were redirected which is
impossible as only 64-byte packets were transmitted and the MTU was
1500.
Fix by treating packets as a 64-bit number:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 61 sec used 0 sec
Action statistics:
Sent 1370624380864 bytes 21416005951 pkt (dropped 0, overlimits 0 requeues 0)
[...]
Which shows that only 64-byte packets were redirected (1370624380864 /
21416005951 = 64).
Fixes: 380407023526 ("net/sched: Enable netdev drivers to update statistics of offloaded actions")
Reported-by: Joe Botha <joe@atomic.ac>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204123839.1151804-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-01-27
1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs.
From Jianbo Liu.
2) Fix an out-of-bounds read on xfrm state lookup.
From Florian Westphal.
3) Fix secpath handling on packet offload mode.
From Alexandre Cassen.
4) Fix the usage of skb->sk in the xfrm layer.
5) Don't disable preemption while looking up cache state
to fix PREEMPT_RT.
From Sebastian Sewior.
* tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Don't disable preemption while looking up cache state.
xfrm: Fix the usage of skb->sk
xfrm: delete intermediate secpath entry in packet offload mode
xfrm: state: fix out-of-bounds read during lookup
xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO
====================
Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Page ppol tried to cache the NAPI ID in page pool info to avoid
having a dependency on the life cycle of the NAPI instance.
Since commit under Fixes the NAPI ID is not populated until
napi_enable() and there's a good chance that page pool is
created before NAPI gets enabled.
Protect the NAPI pointer with the existing page pool mutex,
the reading path already holds it. napi_id itself we need
to READ_ONCE(), it's protected by netdev_lock() which are
not holding in page pool.
Before this patch napi IDs were missing for mlx5:
# ./cli.py --spec netlink/specs/netdev.yaml --dump page-pool-get
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912},
{'id': 143, 'ifindex': 2, 'inflight': 5568, 'inflight-mem': 22806528},
{'id': 142, 'ifindex': 2, 'inflight': 5120, 'inflight-mem': 20971520},
{'id': 141, 'ifindex': 2, 'inflight': 4992, 'inflight-mem': 20447232},
...
After:
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912,
'napi-id': 565},
{'id': 143, 'ifindex': 2, 'inflight': 4224, 'inflight-mem': 17301504,
'napi-id': 525},
{'id': 142, 'ifindex': 2, 'inflight': 4288, 'inflight-mem': 17563648,
'napi-id': 524},
...
Fixes: 86e25f40aa1e ("net: napi: Add napi_config")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250123231620.1086401-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Improved handling of LSM "secctx" strings through lsm_context struct
The LSM secctx string interface is from an older time when only one
LSM was supported, migrate over to the lsm_context struct to better
support the different LSMs we now have and make it easier to support
new LSMs in the future.
These changes explain the Rust, VFS, and networking changes in the
diffstat.
- Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are
enabled
Small tweak to be a bit smarter about when we build the LSM's common
audit helpers.
- Check for absurdly large policies from userspace in SafeSetID
SafeSetID policies rules are fairly small, basically just "UID:UID",
it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which
helps quiet a number of syzbot related issues. While work is being
done to address the syzbot issues through other mechanisms, this is a
trivial and relatively safe fix that we can do now.
- Various minor improvements and cleanups
A collection of improvements to the kernel selftests, constification
of some function parameters, removing redundant assignments, and
local variable renames to improve readability.
* tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: initialize local array before use to quiet static analysis
safesetid: check size of policy writes
net: corrections for security_secid_to_secctx returns
lsm: rename variable to avoid shadowing
lsm: constify function parameters
security: remove redundant assignment to return variable
lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set
selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test
binder: initialize lsm_context structure
rust: replace lsm context+len with lsm_context
lsm: secctx provider check on release
lsm: lsm_context in security_dentry_init_security
lsm: use lsm_context in security_inode_getsecctx
lsm: replace context+len with lsm_context
lsm: ensure the correct LSM context releaser
|
|
We will convert rtnl_lock() with rtnl_net_lock(), and we want to
convert __in6_dev_get() too.
__in6_dev_get() uses rcu_dereference_rtnl(), but as written in its
comment, rtnl_dereference() or rcu_dereference() is preferable.
Let's add __in6_dev_get_rtnl_net() that uses rtnl_net_dereference().
We can add the RCU version helper later if needed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Unbreak set size settings for rbtree set backend, intervals in
rbtree are represented as two elements, this detailed is leaked
to userspace leading to bogus ENOSPC from control plane.
2) Remove dead code in br_netfilter's br_nf_pre_routing_finish()
due to never matching error when looking up for route,
from Antoine Tenart.
3) Simplify check for device already in use in flowtable,
from Phil Sutter.
4) Three patches to restore interface name field in struct nft_hook
and use it, this is to prepare for wildcard interface support.
From Phil Sutter.
5) Do not remove netdev basechain when last device is gone, this is
for consistency with the flowtable behaviour. This allows for netdev
basechains without devices. Another patch to simplify netdev event
notifier after this update. Also from Phil.
6) Two patches to add missing spinlock when flowtable updates TCP
state flags, from Florian Westphal.
7) Simplify __nf_ct_refresh_acct() by removing skbuff parameter,
also from Florian.
8) Flowtable gc now extends ct timeout for offloaded flow. This
is to address a possible race that leads to handing over flow
to classic path with long ct timeouts.
9) Tear down flow if cached rt_mtu is stale, before this patch,
packet is handed over to classic path but flow entry still remained
in place.
10) Revisit the flowtable teardown strategy, which was originally
designed to release flowtable hardware entries early. Add a new
CLOSING flag that still allows hardware to release entries when
fin/rst is seen, but keeps the flow entry in place when the
TCP connection is closed. Release flow after timeout or when a new
syn packet is seen for TCP reopen scenario.
* tag 'nf-next-25-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: flowtable: add CLOSING state
netfilter: flowtable: teardown flow if cached mtu is stale
netfilter: conntrack: rework offload nf_conn timeout extension logic
netfilter: conntrack: remove skb argument from nf_ct_refresh
netfilter: nft_flow_offload: update tcp state flags under lock
netfilter: nft_flow_offload: clear tcp MAXACK flag before moving to slowpath
netfilter: nf_tables: Simplify chain netdev notifier
netfilter: nf_tables: Tolerate chains with no remaining hooks
netfilter: nf_tables: Compare netdev hooks based on stored name
netfilter: nf_tables: Use stored ifname in netdev hook dumps
netfilter: nf_tables: Store user-defined hook ifname
netfilter: nf_tables: Flowtable hook's pf value never varies
netfilter: br_netfilter: remove unused conditional and dead code
netfilter: nf_tables: fix set size with rbtree backend
====================
Link: https://patch.msgid.link/20250119172051.8261-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Separate the HDS config from the ethtool state struct.
The HDS config contains just simple parameters, not state.
Having it as a separate struct will make it easier to clone / copy
and also long term potentially make it per-queue.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
unix_dgram_disconnected() is called from two places:
1. when a connect()ed socket dis-connect()s or re-connect()s to
another socket
2. when sendmsg() fails because the peer socket that the client
has connect()ed to has been close()d
Then, the client's recv queue is purged to remove all messages from
the old peer socket.
Let's define a new drop reason for that case.
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>>
>>> # s1 has a message from s2
>>> s1, s2 = socketpair(AF_UNIX, SOCK_DGRAM)
>>> s2.send(b'hello world')
>>>
>>> # re-connect() drops the message from s2
>>> s3 = socket(AF_UNIX, SOCK_DGRAM)
>>> s3.bind('')
>>> s1.connect(s3.getsockname())
# cat /sys/kernel/tracing/trace_pipe
python3-250 ... kfree_skb: ... location=skb_queue_purge_reason+0xdc/0x110 reason: UNIX_DISCONNECT
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AF_UNIX SOCK_STREAM socket supports MSG_OOB.
When OOB data is sent to a socket, recv() will break at that point.
If the next recv() does not have MSG_OOB, the normal data following
the OOB data is returned.
Then, the OOB skb is dropped.
Let's define a new drop reason for that case in manage_oob().
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX)
>>> s1.send(b'a', MSG_OOB)
>>> s1.send(b'b')
>>> s2.recv(2)
b'b'
# cat /sys/kernel/tracing/trace_pipe
...
python3-223 ... kfree_skb: ... location=unix_stream_read_generic+0x59e/0xc20 reason: UNIX_SKIP_OOB
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
unix_release_sock() is called when the last refcnt of struct file
is released.
Let's define a new drop reason SKB_DROP_REASON_SOCKET_CLOSE and
set it for kfree_skb() in unix_release_sock().
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX)
>>> s1.send(b'hello world')
>>> s2.close()
# cat /sys/kernel/tracing/trace_pipe
...
python3-280 ... kfree_skb: ... protocol=0 location=unix_release_sock+0x260/0x420 reason: SOCKET_CLOSE
To be precise, unix_release_sock() is also called for a new child
socket in unix_stream_connect() when something fails, but the new
sk does not have skb in the recv queue then and no event is logged.
Note that only tcp_inbound_ao_hash() uses a similar drop reason,
SKB_DROP_REASON_TCP_CLOSE, and this can be generalised later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following patch adds a new drop reason starting with
the SOCKET_ prefix.
Let's gather the existing SOCKET_ reasons.
Note that the order is not part of uAPI.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change resolves warning produced by sparse tool as currently
there is a mismatch between normal generic type in salt and endian
annotated type in macsec driver code. Endian annotated types should
be used here.
Sparse output:
warning: restricted ssci_t degrades to integer
warning: incorrect type in assignment (different base types)
expected restricted ssci_t [usertype] ssci
got unsigned int
warning: restricted __be64 degrades to integer
warning: incorrect type in assignment (different base types)
expected restricted __be64 [usertype] pn
got unsigned long long
Signed-off-by: Ales Nezbeda <anezbeda@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch addresses issues with filter counting in block (tcf_block),
particularly for software bypass scenarios, by introducing a more
accurate mechanism using useswcnt.
Previously, filtercnt and skipswcnt were introduced by:
Commit 2081fd3445fe ("net: sched: cls_api: add filter counter") and
Commit f631ef39d819 ("net: sched: cls_api: add skip_sw counter")
filtercnt tracked all tp (tcf_proto) objects added to a block, and
skipswcnt counted tp objects with the skipsw attribute set.
The problem is: a single tp can contain multiple filters, some with skipsw
and others without. The current implementation fails in the case:
When the first filter in a tp has skipsw, both skipswcnt and filtercnt
are incremented, then adding a second filter without skipsw to the same
tp does not modify these counters because tp->counted is already set.
This results in bypass software behavior based solely on skipswcnt
equaling filtercnt, even when the block includes filters without
skipsw. Consequently, filters without skipsw are inadvertently bypassed.
To address this, the patch introduces useswcnt in block to explicitly count
tp objects containing at least one filter without skipsw. Key changes
include:
Whenever a filter without skipsw is added, its tp is marked with usesw
and counted in useswcnt. tc_run() now uses useswcnt to determine software
bypass, eliminating reliance on filtercnt and skipswcnt.
This refined approach prevents software bypass for blocks containing
mixed filters, ensuring correct behavior in tc_run().
Additionally, as atomic operations on useswcnt ensure thread safety and
tp->lock guards access to tp->usesw and tp->counted, the broader lock
down_write(&block->cb_lock) is no longer required in tc_new_tfilter(),
and this resolves a performance regression caused by the filter counting
mechanism during parallel filter insertions.
The improvement can be demonstrated using the following script:
# cat insert_tc_rules.sh
tc qdisc add dev ens1f0np0 ingress
for i in $(seq 16); do
taskset -c $i tc -b rules_$i.txt &
done
wait
Each of rules_$i.txt files above includes 100000 tc filter rules to a
mlx5 driver NIC ens1f0np0.
Without this patch:
# time sh insert_tc_rules.sh
real 0m50.780s
user 0m23.556s
sys 4m13.032s
With this patch:
# time sh insert_tc_rules.sh
real 0m17.718s
user 0m7.807s
sys 3m45.050s
Fixes: 047f340b36fc ("net: sched: make skip_sw actually skip software")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp rst/fin packet triggers an immediate teardown of the flow which
results in sending flows back to the classic forwarding path.
This behaviour was introduced by:
da5984e51063 ("netfilter: nf_flow_table: add support for sending flows back to the slow path")
b6f27d322a0a ("netfilter: nf_flow_table: tear down TCP flows if RST or FIN was seen")
whose goal is to expedite removal of flow entries from the hardware
table. Before these patches, the flow was released after the flow entry
timed out.
However, this approach leads to packet races when restoring the
conntrack state as well as late flow re-offload situations when the TCP
connection is ending.
This patch adds a new CLOSING state that is is entered when tcp rst/fin
packet is seen. This allows for an early removal of the flow entry from
the hardware table. But the flow entry still remains in software, so tcp
packets to shut down the flow are not sent back to slow path.
If syn packet is seen from this new CLOSING state, then this flow enters
teardown state, ct state is set to TCP_CONNTRACK_CLOSE state and packet
is sent to slow path, so this TCP reopen scenario can be handled by
conntrack. TCP_CONNTRACK_CLOSE provides a small timeout that aims at
quickly releasing this stale entry from the conntrack table.
Moreover, skip hardware re-offload from flowtable software packet if the
flow is in CLOSING state.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Offload nf_conn entries may not see traffic for a very long time.
To prevent incorrect 'ct is stale' checks during nf_conntrack table
lookup, the gc worker extends the timeout nf_conn entries marked for
offload to a large value.
The existing logic suffers from a few problems.
Garbage collection runs without locks, its unlikely but possible
that @ct is removed right after the 'offload' bit test.
In that case, the timeout of a new/reallocated nf_conn entry will
be increased.
Prevent this by obtaining a reference count on the ct object and
re-check of the confirmed and offload bits.
If those are not set, the ct is being removed, skip the timeout
extension in this case.
Parallel teardown is also problematic:
cpu1 cpu2
gc_worker
calls flow_offload_teardown()
tests OFFLOAD bit, set
clear OFFLOAD bit
ct->timeout is repaired (e.g. set to timeout[UDP_CT_REPLIED])
nf_ct_offload_timeout() called
expire value is fetched
<INTERRUPT>
-> NF_CT_DAY timeout for flow that isn't offloaded
(and might not see any further packets).
Use cmpxchg: if ct->timeout was repaired after the 2nd 'offload bit' test
passed, then ct->timeout will only be updated of ct->timeout was not
altered in between.
As we already have a gc worker for flowtable entries, ct->timeout repair
can be handled from the flowtable gc worker.
This avoids having flowtable specific logic in the conntrack core
and avoids checking entries that were never offloaded.
This allows to remove the nf_ct_offload_timeout helper.
Its safe to use in the add case, but not on teardown.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Its not used (and could be NULL), so remove it.
This allows to use nf_ct_refresh in places where we don't have
an skb without having to double-check that skb == NULL would be safe.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Do not drop a netdev-family chain if the last interface it is registered
for vanishes. Users dumping and storing the ruleset upon shutdown to
restore it upon next boot may otherwise lose the chain and all contained
rules. They will still lose the list of devices, a later patch will fix
that. For now, this aligns the event handler's behaviour with that for
flowtables.
The controversal situation at netns exit should be no problem here:
event handler will unregister the hooks, core nftables cleanup code will
drop the chain itself.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Prepare for hooks with NULL ops.dev pointer (due to non-existent device)
and store the interface name and length as specified by the user upon
creation. No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The existing rbtree implementation uses singleton elements to represent
ranges, however, userspace provides a set size according to the number
of ranges in the set.
Adjust provided userspace set size to the number of singleton elements
in the kernel by multiplying the range by two.
Check if the no-match all-zero element is already in the set, in such
case release one slot in the set size.
Fixes: 0ed6389c483d ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add new VID/PID 13d3/3610 for MT7922
- btusb: Add new VID/PID 13d3/3628 for MT7925
- btusb: Add MT7921e device 13d3:3576
- btusb: Add RTL8851BE device 13d3:3600
- btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
- btusb: add sysfs attribute to control USB alt setting
- qca: Expand firmware-name property
- qca: Fix poor RF performance for WCN6855
- L2CAP: handle NULL sock pointer in l2cap_sock_alloc
- Allow reset via sysfs
- ISO: Allow BIG re-sync
- dt-bindings: Utilize PMU abstraction for WCN6750
- MGMT: Mark LL Privacy as stable
* tag 'for-net-next-2025-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits)
Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync
Bluetooth: qca: Fix poor RF performance for WCN6855
Bluetooth: Allow reset via sysfs
Bluetooth: Get rid of cmd_timeout and use the reset callback
Bluetooth: Remove the cmd timeout count in btusb
Bluetooth: Use str_enable_disable-like helpers
Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw
Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc
Bluetooth: btusb: Add RTL8851BE device 13d3:3600
dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750
Bluetooth: btusb: Add MT7921e device 13d3:3576
Bluetooth: btrtl: check for NULL in btrtl_setup_realtek()
Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
Bluetooth: qca: Expand firmware-name to load specific rampatch
Bluetooth: qca: Update firmware-name to support board specific nvm
dt-bindings: net: bluetooth: qca: Expand firmware-name property
Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925
Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922
Bluetooth: btusb: add sysfs attribute to control USB alt setting
Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
...
====================
Link: https://patch.msgid.link/20250117213203.3921910-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Integrate with the standard infrastructure for reporting hardware packet
timestamping statistics.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: support FW Recovery Mode
Konrad Knitter says:
Enable update of card in FW Recovery Mode
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: support FW Recovery Mode
devlink: add devl guard
pldmfw: enable selected component update
====================
Link: https://patch.msgid.link/20250116212059.1254349-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add devl guard for scoped_guard().
Example usage:
scoped_guard(devl, priv_to_devlink(pf)) {
err = init_devlink(pf);
if (err)
return err;
}
Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc8).
Conflicts:
drivers/net/ethernet/realtek/r8169_main.c
1f691a1fc4be ("r8169: remove redundant hwmon support")
152d00a91396 ("r8169: simplify setting hwmon attribute visibility")
https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command")
f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref")
drivers/net/ethernet/intel/ice/ice_type.h
50327223a8bb ("ice: add lock to protect low latency interface")
dc26548d729e ("ice: Fix quad registers read on E825")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Notably this includes fixes for a few regressions spotted very
recently. No known outstanding ones.
Current release - regressions:
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in
ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth:
- bnxt: always recalculate features after XDP clearing, fix
null-deref
- mlx5: fix sub-function add port error handling
- fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth:
- ice: fix E825 initialization
- mlx5e: fix inversion dependency warning while enabling IPsec
tunnel
- gtp: destroy device along with udp socket's netns dismantle.
- xilinx: axienet: Fix IRQ coalescing packet count overflow"
* tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netdev: avoid CFI problems with sock priv helpers
net/mlx5e: Always start IPsec sequence number from 1
net/mlx5e: Rely on reqid in IPsec tunnel mode
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
net/mlx5: Clear port select structure when fail to create
net/mlx5: SF, Fix add port error handling
net/mlx5: Fix a lockdep warning as part of the write combining test
net/mlx5: Fix RDMA TX steering prio
net: make page_pool_ref_netmem work with net iovs
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
net: fec: handle page_pool_dev_alloc_pages error
net: netpoll: ensure skb_pool list is always initialized
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
selftests: mptcp: avoid spurious errors on disconnect
mptcp: fix spurious wake-up on under memory pressure
mptcp: be sure to send ack when mptcp-level window re-opens
...
|
|
cleanup_net() is the single thread responsible
for netns dismantles, and a serious bottleneck.
Before we can get per-netns RTNL, make sure
all synchronize_net() called from this thread
are using rcu_synchronize_expedited().
v3: deal with CONFIG_NET_NS=n
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250114205531.967841-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_ref_netmem() should work with either netmem representation, but
currently it casts to a page with netmem_to_page(), which will fail with
net iovs. Use netmem_get_pp_ref_count_ref() instead.
Fixes: 8ab79ed50cf1 ("page_pool: devmem support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/20250108220644.3528845-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hdev->reset is never used now and the hdev->cmd_timeout actually
does reset. This patch changes the call path from
hdev->cmd_timeout -> vendor_cmd_timeout -> btusb_reset -> hdev->reset
, to
hdev->reset -> vendor_reset -> btusb_reset
Which makes it clear when we export the hdev->reset to a wider usage
e.g. allowing reset from sysfs.
This patch doesn't introduce any behavior change.
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_bdaddr_list_del_with_flags() was added in 2020's
commit 8baaa4038edb ("Bluetooth: Add bdaddr_list_with_flags for classic
whitelist")
but has remained unused.
hci_remove_ext_adv_instance() was added in 2020's
commit eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS
connections")
but has remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This marks LL Privacy as stable by removing its experimental UUID and
move its functionality to Device Flag (HCI_CONN_FLAG_ADDRESS_RESOLUTION)
which can be set by MGMT Device Set Flags so userspace retain control of
the feature.
Link: https://github.com/bluez/bluez/issues/1028
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Prior patch in the series added TCP_RFC7323_PAWS_ACK drop reason.
This patch adds the corresponding SNMP counter, for folks
using nstat instead of tracing for TCP diagnostics.
nstat -az | grep PAWSOldAck
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250113135558.3180360-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XPS can cause reorders because of the relaxed OOO
conditions for pure ACK packets.
For hosts not using RFS, what can happpen is that ACK
packets are sent on behalf of the cpu processing NIC
interrupts, selecting TX queue A for ACK packet P1.
Then a subsequent sendmsg() can run on another cpu.
TX queue selection uses the socket hash and can choose
another queue B for packets P2 (with payload).
If queue A is more congested than queue B,
the ACK packet P1 could be sent on the wire after
P2.
A linux receiver when processing P1 (after P2) currently increments
LINUX_MIB_PAWSESTABREJECTED (TcpExtPAWSEstab)
and use TCP_RFC7323_PAWS drop reason.
It might also send a DUPACK if not rate limited.
In order to better understand this pattern, this
patch adds a new drop_reason : TCP_RFC7323_PAWS_ACK.
For old ACKS like these, we no longer increment
LINUX_MIB_PAWSESTABREJECTED and no longer sends a DUPACK,
keeping credit for other more interesting DUPACK.
perf record -e skb:kfree_skb -a
perf script
...
swapper 0 [148] 27475.438637: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438706: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438908: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439010: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439214: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.439286: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
...
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250113135558.3180360-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains a small batch of Netfilter/IPVS updates
for net-next:
1) Remove unused genmask parameter in nf_tables_addchain()
2) Speed up reads from /proc/net/ip_vs_conn, from Florian Westphal.
3) Skip empty buckets in hashlimit to avoid atomic operations that results
in false positive reports by syzbot with lockdep enabled, patch from
Eric Dumazet.
4) Add conntrack event timestamps available via ctnetlink,
from Florian Westphal.
netfilter pull request 25-01-11
* tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: add conntrack event timestamp
netfilter: xt_hashlimit: htable_selective_cleanup() optimization
ipvs: speed up reads from ip_vs_conn proc file
netfilter: nf_tables: remove the genmask parameter
====================
Link: https://patch.msgid.link/20250111230800.67349-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When in non-MLO mode, the key ID was set to -1 even for keys that are
not pairwise. Change the link ID to be the link ID of the deflink in
this case so that drivers do not need to special cases for this.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.0c066f084677.I4a5c288465e75119edb6a0df90dddf6f30d14a02@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for configuring Emergency Preparedness Communication
Services (EPCS) for station mode.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.ea54ac94445c.I11d750188bc0871e13e86146a3b5cc048d853e69@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for requesting dynamic addition/removal of links to the
current MLO association.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.cef23352f2a2.I79c849974c494cb1cbf9e1b22a5d2d37395ff5ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the SAE_H2E selector already exists, which needs to be
implemented by the SME. As new such selectors might be added in the
future, add a feature to permit userspace to report a selector as
supported.
If not given, the kernel should assume that userspace does support
SAE_H2E.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.fe67b871cc39.Ieb98390328927e998e612345a58b6dbc00b0e3a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_key_conf::keyidx s in range 0-7, ano not 0-3. Make this clear
in the documentation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250101070249.4e414710fba7.Ib739c40dd5aa6ed148c3151220eb38d8a9e238de@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order to save power, it can be desirable to change the
RX operating mode using OMI to reduce the bandwidth. As the
handshake must be done in the HTC+ field, it cannot be done
by mac80211 directly, so expose functions to the driver to
request and finalize the necessary updates.
Note that RX OMI really only changes what the peer (AP) will
transmit to us, but in order to use it to actually save some
power (by reducing the listen bandwidth) we also update rate
scaling and then the channel context's mindef accordingly.
The updates are split into two in order to sequence them
correctly, when reducing bandwidth first reduce the rate
scaling and thus TX, then send OMI, then reduce the listen
bandwidth (chandef); when increasing bandwidth this is the
other way around. This also requires tracking in different
variables which part is applicable already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, the sequence goes like this (among others):
1. flush all stations (including the AP ones) -> this will tell the
drivers to remove the stations
2. notify the driver the vif is not associated.
Which means that in between 1 and 2, the state is that the vif is
associated, but there is no AP station, which makes no sense, and may be
problematic for some drivers (for example iwlwifi)
Change the sequence to:
1. flush the TDLS stations
2. move the AP station to IEEE80211_STA_NONE
3. notify the driver about the vif being unassociated
4. flush the AP station
In order to not break other drivers, add a vif flag to indicate whether
the driver wants to new sequence or not. If the flag is not set, then
things will be done in the old sequence.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 86e25f40aa1e ("net: napi: Add napi_config") moved napi->napi_id
assignment to a later point in time (napi_hash_add_with_id). This breaks
__xdp_rxq_info_reg which copies napi_id at an earlier time and now
stores 0 napi_id. It also makes sk_mark_napi_id_once_xdp and
__sk_mark_napi_id_once useless because they now work against 0 napi_id.
Since sk_busy_loop requires valid napi_id to busy-poll on, there is no way
to busy-poll AF_XDP sockets anymore.
Bring back the ability to busy-poll on XSK by resolving socket's napi_id
at bind time. This relies on relatively recent netif_queue_set_napi,
but (assume) at this point most popular drivers should have been converted.
This also removes per-tx/rx cycles which used to check and/or set
the napi_id value.
Confirmed by running a busy-polling AF_XDP socket
(github.com/fomichev/xskrtt) on mlx5 and looking at BusyPollRxPackets
from /proc/net/netstat.
Fixes: 86e25f40aa1e ("net: napi: Add napi_config")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250109003436.2829560-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix the maximum cell name length
- Fix merge preference rule failure condition
fuse:
- Fix fuse_get_user_pages() so it doesn't risk misleading the caller
to think pages have been allocated when they actually haven't
- Fix direct-io folio offset and length calculation
netfs:
- Fix async direct-io handling
- Fix read-retry for filesystems that don't provide a
->prepare_read() method
vfs:
- Prevent truncating 64-bit offsets to 32-bits in iomap
- Fix memory barrier interactions when polling
- Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags
leading to MNT_ONRB to not be raised and invalid access to a list
member"
* tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
afs: Fix merge preference rule failure condition
netfs: Fix read-retry for fs with no ->prepare_read()
netfs: Fix kernel async DIO
fs: kill MNT_ONRB
iomap: avoid avoid truncating 64-bit offset to 32 bits
afs: Fix the maximum cell name length
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
|
|
Bring in the fixes for __pollwait() and waitqueue_active() interactions.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
