summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Expand)AuthorFilesLines
2018-07-29Merge tag 'linux-can-next-for-4.19-20180727' of ssh://gitolite.kernel.org/pub...David S. Miller22-2284/+6475
2018-07-29qed: remove redundant functions qed_set_gft_event_id_cm_hdrYueHaibing1-13/+0
2018-07-29liquidio: remove redundant function cn23xx_dump_vf_iq_regsYueHaibing1-30/+0
2018-07-29net: mvneta: Improve the buffer allocation method for SWBMYelena Krivosheev1-98/+183
2018-07-29net: mvneta: Verify hardware checksum only when offload checksum feature is setYelena Krivosheev1-1/+2
2018-07-29net: mvneta: Allocate page for the descriptorGregory CLEMENT2-41/+24
2018-07-29net: mvneta: discriminate error cause for missed packetGregory CLEMENT1-6/+22
2018-07-29net: mvneta: increase number of buffers in RX and TX queueYelena Krivosheev1-2/+2
2018-07-29net: mvneta: remove data pointer usage from device_node structureGregory CLEMENT3-6/+32
2018-07-29net: mvneta: fix mtu change on port without linkYelena Krivosheev1-1/+0
2018-07-29net: ethernet: mvneta: Fix napi structure mixup on armada 3700Andrew Lunn1-10/+12
2018-07-27net: usb: sr9700: Replace mdelay() with msleep() in sr9700_bind()Jia-Ju Bai1-1/+1
2018-07-27net: usb: pegasus: Replace mdelay() with msleep() in setup_pegasus_II()Jia-Ju Bai1-1/+1
2018-07-27net: phy: marvell: Replace mdelay() with msleep() in m88e1116r_config_init()Jia-Ju Bai1-1/+1
2018-07-27net: nvidia: forcedeth: Replace GFP_ATOMIC with GFP_KERNEL in nv_probe()Jia-Ju Bai1-2/+2
2018-07-27net: jme: Replace mdelay() with msleep() and usleep_range() in jme_wait_link()Jia-Ju Bai1-2/+2
2018-07-27net: hisilicon: hns: Replace mdelay() with msleep()Jia-Ju Bai2-4/+4
2018-07-27net: amd: pcnet32: Replace GFP_ATOMIC with GFP_KERNEL in pcnet32_alloc_ring()Jia-Ju Bai1-4/+4
2018-07-27cxgb4: print ULD queue information managed by LLDRahul Lakkireddy1-19/+277
2018-07-27mlxsw: spectrum: Support ieee_setapp, ieee_delappPetr Machata2-2/+271
2018-07-27mlxsw: reg: Add QoS Priority to DSCP Mapping RegisterPetr Machata1-0/+89
2018-07-27mlxsw: reg: Add QoS ReWrite Enable RegisterPetr Machata1-0/+39
2018-07-27mlxsw: reg: Add QoS Priority Trust State RegisterPetr Machata1-0/+39
2018-07-27mlxsw: reg: Add QoS Port DSCP to Priority Mapping RegisterPetr Machata1-0/+52
2018-07-27can: kvaser_usb: Simplify struct kvaser_cmd_cardinfoJimmy Assarsson1-11/+3
2018-07-27can: kvaser_usb: Add support for Kvaser USB hydra familyJimmy Assarsson6-12/+2151
2018-07-27can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.cJimmy Assarsson6-2031/+2293
2018-07-27can: kvaser_usb: Add SPDX GPL-2.0 license identifierJimmy Assarsson1-6/+2
2018-07-27can: kvaser_usb: Fix typosJimmy Assarsson1-7/+7
2018-07-27can: kvaser_usb: Improve logging messagesJimmy Assarsson1-23/+17
2018-07-27can: kvaser_usb: Refactor kvaser_usb_init_one()Jimmy Assarsson1-6/+5
2018-07-27can: kvaser_usb: Refactor kvaser_usb_get_endpoints()Jimmy Assarsson1-10/+8
2018-07-27can: kvaser_usb: Add pointer to struct usb_interface into struct kvaser_usbJimmy Assarsson1-0/+3
2018-07-27can: kvaser_usb: Replace USB timeout constants with one defineJimmy Assarsson1-10/+6
2018-07-27can: kvaser_usb: Rename message/msg to command/cmdJimmy Assarsson1-238/+237
2018-07-27can: kvaser_usb: Remove unused commands and definesJimmy Assarsson1-38/+0
2018-07-27can: kvaser_usb: Remove unnecessary returnJimmy Assarsson1-2/+0
2018-07-27can: peak_canfd: rearrange the way resources are releasedStephane Grosjean1-3/+6
2018-07-27can: peak_canfd: fix typo in error messageStephane Grosjean1-1/+1
2018-07-27can: peak_canfd: use ndev irq instead of pci_dev oneStephane Grosjean1-3/+3
2018-07-27can: peak_canfd: remove useless defined symbolsStephane Grosjean1-3/+0
2018-07-27can: peak_canfd: improves 32-bit alignmentStephane Grosjean1-1/+1
2018-07-27can: peak_usb: mark expected switch fall-throughsGustavo A. R. Silva3-0/+4
2018-07-27can: xilinx_can: add support for Xilinx CAN FD coreAnssi Hannula1-44/+259
2018-07-27can: xilinx_can: refactor code in preparation for CAN FD supportAnssi Hannula1-88/+118
2018-07-27can: xilinx_can: update stats.tx_bytes after transmissionAnssi Hannula1-4/+2
2018-07-27can: xilinx_can: use can_change_state()Anssi Hannula1-27/+7
2018-07-27can: xilinx_can: only report warning and passive states on state changesAnssi Hannula1-1/+2
2018-07-27can: sja1000: Replace mdelay with usleep_range in pcan_add_channelsJia-Ju Bai1-1/+1
2018-07-27can: sja1000: Replace mdelay with usleep_range in peak_pci_probeJia-Ju Bai1-1/+1
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-05 16:51:00 +0300