| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
clocks
There is a bug in ptp_clock_adjtime() which makes it refuse the
operation even if we just want to read the current clock dialed
frequency, not modify anything (tx->modes == 0). That should be possible
even if the clock is free-running. For context, the kernel UAPI is the
same for getting and setting the frequency of a POSIX clock.
For example, ptp4l errors out at clock_create() -> clockadj_get_freq()
-> clock_adjtime() time, when it should logically only have failed on
actual adjustments to the clock, aka if the clock was configured as
slave. But in master mode it should work.
This was discovered when examining the issue described in the previous
commit, where ptp_clock_freerun() returned true despite n_vclocks being
zero.
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250613174749.406826-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
What is broken
--------------
ptp4l, and any other application which calls clock_adjtime() on a
physical clock, is greeted with error -EBUSY after commit 87f7ce260a3c
("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()").
Explanation for the breakage
----------------------------
The blamed commit was based on the false assumption that
ptp_vclock_in_use() callers already test for n_vclocks prior to calling
this function.
This is notably incorrect for the code path below, in which there is, in
fact, no n_vclocks test:
ptp_clock_adjtime()
-> ptp_clock_freerun()
-> ptp_vclock_in_use()
The result is that any clock adjustment on any physical clock is now
impossible. This is _despite_ there not being any vclock over this
physical clock.
$ ptp4l -i eno0 -2 -P -m
ptp4l[58.425]: selected /dev/ptp0 as PTP clock
[ 58.429749] ptp: physical clock is free running
ptp4l[58.431]: Failed to open /dev/ptp0: Device or resource busy
failed to create a clock
$ cat /sys/class/ptp/ptp0/n_vclocks
0
The patch makes the ptp_vclock_in_use() function say "if it's not a
virtual clock, then this physical clock does have virtual clocks on
top".
Then ptp_clock_freerun() uses this information to say "this physical
clock has virtual clocks on top, so it must stay free-running".
Then ptp_clock_adjtime() uses this information to say "well, if this
physical clock has to be free-running, I can't do it, return -EBUSY".
Simply put, ptp_vclock_in_use() cannot be simplified so as to remove the
test whether vclocks are in use.
What did the blamed commit intend to fix
----------------------------------------
The blamed commit presents a lockdep warning stating "possible recursive
locking detected", with the n_vclocks_store() and ptp_clock_unregister()
functions involved.
The recursive locking seems this:
n_vclocks_store()
-> mutex_lock_interruptible(&ptp->n_vclocks_mux) // 1
-> device_for_each_child_reverse(..., unregister_vclock)
-> unregister_vclock()
-> ptp_vclock_unregister()
-> ptp_clock_unregister()
-> ptp_vclock_in_use()
-> mutex_lock_interruptible(&ptp->n_vclocks_mux) // 2
The issue can be triggered by creating and then deleting vclocks:
$ echo 2 > /sys/class/ptp/ptp0/n_vclocks
$ echo 0 > /sys/class/ptp/ptp0/n_vclocks
But note that in the original stack trace, the address of the first lock
is different from the address of the second lock. This is because at
step 1 marked above, &ptp->n_vclocks_mux is the lock of the parent
(physical) PTP clock, and at step 2, the lock is of the child (virtual)
PTP clock. They are different locks of different devices.
In this situation there is no real deadlock, the lockdep warning is
caused by the fact that the mutexes have the same lock class on both the
parent and the child. Functionally it is fine.
Proposed alternative solution
-----------------------------
We must reintroduce the body of ptp_vclock_in_use() mostly as it was
structured prior to the blamed commit, but avoid the lockdep warning.
Based on the fact that vclocks cannot be nested on top of one another
(ptp_is_attribute_visible() hides n_vclocks for virtual clocks), we
already know that ptp->n_vclocks is zero for a virtual clock. And
ptp->is_virtual_clock is a runtime invariant, established at
ptp_clock_register() time and never changed. There is no need to
serialize on any mutex in order to read ptp->is_virtual_clock, and we
take advantage of that by moving it outside the lock.
Thus, virtual clocks do not need to acquire &ptp->n_vclocks_mux at
all, and step 2 in the code walkthrough above can simply go away.
We can simply return false to the question "ptp_vclock_in_use(a virtual
clock)".
Other notes
-----------
Releasing &ptp->n_vclocks_mux before ptp_vclock_in_use() returns
execution seems racy, because the returned value can become stale as
soon as the function returns and before the return value is used (i.e.
n_vclocks_store() can run any time). The locking requirement should
somehow be transferred to the caller, to ensure a longer life time for
the returned value, but this seems out of scope for this severe bug fix.
Because we are also fixing up the logic from the original commit, there
is another Fixes: tag for that.
Fixes: 87f7ce260a3c ("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()")
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250613174749.406826-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.
However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().
============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock:
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline]
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415
but task is already holding lock:
ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ptp->n_vclocks_mux);
lock(&ptp->n_vclocks_mux);
*** DEADLOCK ***
....
============================================
The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().
The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.
Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking.
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250520160717.7350-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939a5 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The debugfs summary output could access uninitialized elements in
the freq_in[] and signal_out[] arrays, causing NULL pointer
dereferences and triggering a kernel Oops (page_fault_oops).
This patch adds u8 fields (nr_freq_in, nr_signal_out) to track the
number of initialized elements, with a maximum of 4 per array.
The summary output functions are updated to respect these limits,
preventing out-of-bounds access and ensuring safe array handling.
Widen the label variables because the change confuses GCC about
max length of the strings.
Fixes: ef61f5528fca ("ptp: ocp: add Adva timecard support")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250514073541.35817-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc5).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On Adva boards, SMA sysfs store/get operations can call
__handle_signal_outputs() or __handle_signal_inputs() while the `irig`
and `dcf` pointers are uninitialized, leading to a NULL pointer
dereference in __handle_signal() and causing a kernel crash. Adva boards
don't use `irig` or `dcf` functionality, so add Adva-specific callbacks
`ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that
avoid invoking `irig` or `dcf` input/output routines.
Fixes: ef61f5528fca ("ptp: ocp: add Adva timecard support")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250429073320.33277-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "const struct attribute_group **", but the returned
type, while technically matching, will be not const qualified. As there is
no general way to safely add const qualifiers, adjust the allocation type
to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250426061858.work.470-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250417074643.81448-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc3).
No conflicts. Adjacent changes:
tools/net/ynl/pyynl/ynl_gen_c.py
4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place")
7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ptp_ocp_signal_set, the start time for periodic signals is not
aligned to the next period boundary. The current code rounds up the
start time and divides by the period but fails to multiply back by
the period, causing misaligned signal starts. Fix this by multiplying
the rounded-up value by the period to ensure the start time is the
closest next period.
Fixes: 4bd46bb037f8e ("ptp: ocp: Use DIV64_U64_ROUND_UP for rounding.")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250415053131.129413-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP_PEROUT_REQUEST2 ioctl has gained support for flags specifying
specific output behavior including PTP_PEROUT_ONE_SHOT,
PTP_PEROUT_DUTY_CYCLE, PTP_PEROUT_PHASE.
Driver authors are notorious for not checking the flags of the request.
This results in misinterpreting the request, generating an output signal
that does not match the requested value. It is anticipated that even more
flags will be added in the future, resulting in even more broken requests.
Expecting these issues to be caught during review or playing whack-a-mole
after the fact is not a great solution.
Instead, introduce the supported_perout_flags field in the ptp_clock_info
structure. Update the core character device logic to explicitly reject any
request which has a flag not on this list.
This ensures that drivers must 'opt in' to the flags they support. Drivers
which don't set the .supported_perout_flags field will not need to check
that unsupported flags aren't passed, as the core takes care of this.
Update the drivers which do support flags to set this new field.
Note the following driver files set n_per_out to a non-zero value but did
not check the flags at all:
• drivers/ptp/ptp_clockmatrix.c
• drivers/ptp/ptp_idt82p33.c
• drivers/ptp/ptp_fc3.c
• drivers/net/ethernet/ti/am65-cpts.c
• drivers/net/ethernet/aquantia/atlantic/aq_ptp.c
• drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
• drivers/net/dsa/sja1105/sja1105_ptp.c
• drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c
• drivers/net/ethernet/mscc/ocelot_vsc7514.c
• drivers/net/ethernet/intel/i40e/i40e_ptp.c
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-2-f6b17d15475c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP_EXTTS_REQUEST(2) ioctl has a flags field which specifies how the
external timestamp request should behave. This includes which edge of the
signal to timestamp, as well as a specialized "offset" mode. It is expected
that more flags will be added in the future.
Driver authors routinely do not check the flags, often accepting requests
with flags which they do not support. Even drivers which do check flags may
not be future-proofed to reject flags not yet defined. Thus, any future
flag additions often require manually updating drivers to reject these
flags.
This approach of hoping we catch flag checks during review, or playing
whack-a-mole after the fact is the wrong approach.
Introduce the "supported_extts_flags" field to the ptp_clock_info
structure. This field defines the set of flags the device actually
supports.
Update the core character device logic to check this field and reject
unsupported requests. Getting this right is somewhat tricky. First, to
avoid unnecessary repetition and make basic functionality work when
.supported_extts_flags is 0, the core always accepts the PTP_ENABLE_FEATURE
flag. This flag is used to set the 'on' parameter to the .enable function
and is thus always 'supported' by all drivers.
For backwards compatibility, the PTP_RISING_EDGE and PTP_FALLING_EDGE flags
are merely "hints" when using the old PTP_EXTTS_REQUEST ioctl, and are not
expected to be enforced. If the user issues PTP_EXTTS_REQUEST2, the
PTP_STRICT_FLAGS flag is added which is supposed to inform the driver to
strictly validate the flags and reject unsupported requests. To handle
this, first check if the driver reports PTP_STRICT_FLAGS support. If it
does not, then always allow the PTP_RISING_EDGE and PTP_FALLING_EDGE flags.
This keeps backwards compatibility with the original PTP_EXTTS_REQUEST
ioctl where these flags are not guaranteed to be honored.
This way, drivers which do not set the supported_extts_flags will continue
to accept requests for the original PTP_EXTTS_REQUEST ioctl. The core will
automatically reject requests with new flags, and correctly reject requests
with PTP_STRICT_FLAGS, where the driver is supposed to strictly validate
the flags.
Update the various drivers, refactoring their validation logic into the
.supported_extts_flags field. For consistency and readability,
PTP_ENABLE_FEATURE is not set in the supported flags list, and
PTP_EXTTS_EDGES is expanded to PTP_RISING_EDGE | PTP_FALLING_EDGE in all
cases.
Note the following driver files set n_ext_ts to a non-zero value but did
not check flags at all:
• drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c
• drivers/net/ethernet/freescale/enetc/enetc_ptp.c
• drivers/net/ethernet/intel/i40e/i40e_ptp.c
• drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
• drivers/net/ethernet/renesas/ravb_ptp.c
• drivers/net/ethernet/renesas/rtsn.c
• drivers/net/ethernet/renesas/rtsn.h
• drivers/net/ethernet/ti/am65-cpts.c
• drivers/net/ethernet/ti/cpts.h
• drivers/net/ethernet/ti/icssg/icss_iep.c
• drivers/net/ethernet/xscale/ptp_ixp46x.c
• drivers/net/phy/bcm-phy-ptp.c
• drivers/ptp/ptp_ocp.c
• drivers/ptp/ptp_pch.c
• drivers/ptp/ptp_qoriq.c
These drivers behavior does change slightly: they will now reject the
PTP_EXTTS_REQUEST2 ioctl, because they do not strictly validate their
flags. This also makes them no longer incorrectly accept PTP_EXT_OFFSET.
Also note that the renesas ravb driver does not support PTP_STRICT_FLAGS.
We could leave the .supported_extts_flags as 0, but I added the
PTP_RISING_EDGE | PTP_FALLING_EDGE since the driver previously manually
validated these flags. This is equivalent to 0 because the core will allow
these flags regardless unless PTP_STRICT_FLAGS is also set.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-1-f6b17d15475c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The ptp_ocp_signal_from_perout() function supports PTP_PEROUT_DUTY_CYCLE
and PTP_PEROUT_PHASE. It does not support PTP_PEROUT_ONE_SHOT, but does not
reject a request with such an unsupported flag.
Add the appropriate check to ensure that unsupported requests are rejected
both for PTP_PEROUT_ONE_SHOT as well as any future flags.
Fixes: 1aa66a3a135a ("ptp: ocp: Program the signal generators via PTP_CLK_REQ_PEROUT")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-5-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the function _signal_summary_show(), there is a NULL-check for
&bp->signal[nr], which cannot actually be NULL.
Therefore, this redundant check can be removed.
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250305092520.25817-1-i.abramov@mt-integration.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many devices implement highly accurate clocks, which the kernel manages
as PTP Hardware Clocks (PHCs). Userspace applications rely on these
clocks to timestamp events, trace workload execution, correlate
timescales across devices, and keep various clocks in sync.
The kernel’s current implementation of PTP clocks does not enforce file
permissions checks for most device operations except for POSIX clock
operations, where file mode is verified in the POSIX layer before
forwarding the call to the PTP subsystem. Consequently, it is common
practice to not give unprivileged userspace applications any access to
PTP clocks whatsoever by giving the PTP chardevs 600 permissions. An
example of users running into this limitation is documented in [1].
Additionally, POSIX layer requires WRITE permission even for readonly
adjtime() calls which are used in PTP layer to return current frequency
offset applied to the PHC.
Add permission checks for functions that modify the state of a PTP
device. Continue enforcing permission checks for POSIX clock operations
(settime, adjtime) in the POSIX layer. Only require WRITE access for
dynamic clocks adjtime() if any flags are set in the modes field.
[1] https://lists.nwtime.org/sympa/arc/linuxptp-users/2024-01/msg00036.html
Changes in v4:
- Require FMODE_WRITE in ajtime() only for calls modifying the clock in
any way.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vmclock_probe() uses an "out:" label to return from the function on
error. This indicates that some cleanup operation is necessary.
However the label does not do anything as all resources are managed
through devres, making the code slightly harder to read.
Remove the label and just return directly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most resources owned by the vmclock device are managed through devres.
Only the miscdev and ptp clock are managed manually.
This makes the code slightly harder to understand than necessary.
Switch them over to devres and remove the now unnecessary drvdata.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vmclock_remove() tries to detect the successful registration of the misc
device based on the value of its minor value.
However that check is incorrect if the misc device registration was not
attempted in the first place.
Always initialize the minor number, so the check works properly.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If vmclock_ptp_register() fails during probing, vmclock_remove() is
called to clean up the ptp clock and misc device.
It uses dev_get_drvdata() to access the vmclock state.
However the driver data is not yet set at this point.
Assign the driver data earlier.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Without the .owner field, the module can be unloaded while /dev/vmclock0
is open, leading to an oops.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
|
|
Pointer arguments passed to ioctls need to pass through compat_ptr() to
work correctly on s390; as explained in Documentation/driver-api/ioctl.rst.
Detect compat mode at runtime and call compat_ptr() for those commands
which do take pointer arguments.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/1ba5d3a4-7931-455b-a3ce-85a968a7cb10@app.fastmail.com/
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250125-posix-clock-compat_ioctl-v2-1-11c865c500eb@weissschuh.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
|
|
The ioctl and sysfs handlers unconditionally call the ->enable callback.
Not all drivers implement that callback, leading to NULL dereferences.
Example of affected drivers: ptp_s390.c, ptp_vclock.c and ptp_mock.c.
Instead use a dummy callback if no better was specified by the driver.
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250123-ptp-enable-v1-1-b015834d3a47@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
|
|
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
On a board running ntpd and gpsd, I'm seeing a consistent use-after-free
in sys_exit() from gpsd when rebooting:
pps pps1: removed
------------[ cut here ]------------
kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150
CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1
Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kobject_put+0x120/0x150
lr : kobject_put+0x120/0x150
sp : ffffffc0803d3ae0
x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001
x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440
x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600
x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20
x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
kobject_put+0x120/0x150
cdev_put+0x20/0x3c
__fput+0x2c4/0x2d8
____fput+0x1c/0x38
task_work_run+0x70/0xfc
do_exit+0x2a0/0x924
do_group_exit+0x34/0x90
get_signal+0x7fc/0x8c0
do_signal+0x128/0x13b4
do_notify_resume+0xdc/0x160
el0_svc+0xd4/0xf8
el0t_64_sync_handler+0x140/0x14c
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837e6 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
pps_core: source serial1 got cdev (251:1)
<...>
pps pps1: removed
pps_core: unregistering pps1
pps_core: deallocating pps1
Fixes: d953e0e837e6 ("pps: Fix a use-after free bug when unregistering a source.")
Cc: stable@vger.kernel.org
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20241222-sysfs-const-bin_attr-ptp-v1-1-5c1f3ee246fb@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The caller, ptp_kvm_init(), emits a warning if kvm_arch_ptp_init() exits
with any error which is not EOPNOTSUPP:
"fail to initialize ptp_kvm"
Replace ENODEV with EOPNOTSUPP to avoid this spurious warning,
aligning with the ARM implementation.
Fixes: a86ed2cfa13c ("ptp: Don't print an error if ptp_kvm is not supported")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241203-kvm_ptp-eopnotsuppp-v2-1-d1d060f27aa6@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ptp_clock_adjtime sets ptp->dialed_frequency even when adjfine
callback returns an error. This causes subsequent reads to return
an incorrect value.
Fix this by adding error check before ptp->dialed_frequency is set.
Fixes: 39a8cbd9ca05 ("ptp: remember the adjusted frequency")
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20241125105954.1509971-1-ajay.kaher@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VMCLOCK device gives support for accurate timekeeping even across
live migration, unlike the KVM PTP clock. To help ensure that users can
always use ptp_vmclock where it's available in preference to ptp_kvm,
set it to 'default PTP_1588_CLOCK_VMCLOCK' instead of 'default y'.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://patch.msgid.link/89955b74d225129d6e3d79b53aa8d81d1b50560f.camel@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The check on ret has already been performed a few statements earlier
and ret has not been re-assigned and so the re-checking is redundant.
Clean up the code by removing the redundant check.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241031135042.3250614-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Additionally, pass KBUILD_MODNAME to that function, since the 'name'
parameter should indicate who (i.e., which driver) has requested the
resource.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patch.msgid.link/20241028095943.20498-2-pstanner@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a small PtP driver which allows user space to get
the values of the physical and tod clock. This allows
programs like chrony to use STP as clock source and
steer the kernel clock. The physical clock can be used
as a debugging aid to get the clock without any additional
offsets like STP steering or LPAR offset.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://patch.msgid.link/20241023065601.449586-3-svens@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The vmclock device addresses the problem of live migration with
precision clocks. The tolerances of a hardware counter (e.g. TSC) are
typically around ±50PPM. A guest will use NTP/PTP/PPS to discipline that
counter against an external source of 'real' time, and track the precise
frequency of the counter as it changes with environmental conditions.
When a guest is live migrated, anything it knows about the frequency of
the underlying counter becomes invalid. It may move from a host where
the counter running at -50PPM of its nominal frequency, to a host where
it runs at +50PPM. There will also be a step change in the value of the
counter, as the correctness of its absolute value at migration is
limited by the accuracy of the source and destination host's time
synchronization.
In its simplest form, the device merely advertises a 'disruption_marker'
which indicates that the guest should throw away any NTP synchronization
it thinks it has, and start again.
Because the shared memory region can be exposed all the way to userspace
through the /dev/vmclock0 node, applications can still use time from a
fast vDSO 'system call', and check the disruption marker to be sure that
their timestamp is indeed truthful.
The structure also allows for the precise time, as known by the host, to
be exposed directly to guests so that they don't have to wait for NTP to
resync from scratch. The PTP driver consumes this information if present.
Like the KVM PTP clock, this PTP driver can convert TSC-based cross
timestamps into KVM clock values. Unlike the KVM PTP clock, it does so
only when such is actually helpful.
The values and fields are based on the nascent virtio-rtc specification,
and the intent is that a version (hopefully precisely this version) of
this structure will be included as an optional part of that spec. In the
meantime, this driver supports the simple ACPI form of the device which
is being shipped in certain commercial hypervisors (and submitted for
inclusion in QEMU).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-17-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ability to read the PHC (Physical Hardware Clock) alongside
multiple system clocks is currently dependent on the specific
hardware architecture. This limitation restricts the use of
PTP_SYS_OFFSET_PRECISE to certain hardware configurations.
The generic soultion which would work across all architectures
is to read the PHC along with the latency to perform PHC-read as
offered by PTP_SYS_OFFSET_EXTENDED which provides pre and post
timestamps. However, these timestamps are currently limited
to the CLOCK_REALTIME timebase. Since CLOCK_REALTIME is affected
by NTP (or similar time synchronization services), it can
experience significant jumps forward or backward. This hinders
the precise latency measurements that PTP_SYS_OFFSET_EXTENDED
is designed to provide.
This problem could be addressed by supporting MONOTONIC_RAW
timestamps within PTP_SYS_OFFSET_EXTENDED. Unlike CLOCK_REALTIME
or CLOCK_MONOTONIC, the MONOTONIC_RAW timebase is unaffected
by NTP adjustments.
This enhancement can be implemented by utilizing one of the three
reserved words within the PTP_SYS_OFFSET_EXTENDED struct to pass
the clock-id for timestamps. The current behavior aligns with
clock-id for CLOCK_REALTIME timebase (value of 0), ensuring
backward compatibility of the UAPI.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PCIe bus can be pretty busy during boot and probe function can
see excessive delays. Let's find the minimal value out of several
tests and use it as estimated value.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20240905140028.560454-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904015003.1065872-1-nichen@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement additional attribute group to expose serial port information.
Fixes tag points to the commit which introduced the change in serial
port subsystem and made it impossible to use symlinks.
Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Simplify serial port management code by using array of ports and helpers
to get the name of the port. This change is needed to make the next
patch simplier.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
