| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
|
|
Fix the following warning when the driver is compiled as built-in:
warning: unused import: `DeviceId`
--> drivers/net/phy/qt2025.rs:18:5
|
18 | DeviceId, Driver,
| ^^^^^^^^
|
= note: `#[warn(unused_imports)]` on by default
device_table in module_phy_driver macro is defined only when the
driver is built as a module. Use phy::DeviceId in the macro instead of
importing `DeviceId` since `phy` is always used.
Fixes: fd3eaad826da ("net: phy: add Applied Micro QT2025 PHY driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409190717.i135rfVo-lkp@intel.com/
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20240926121404.242092-1-fujita.tomonori@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 504fc6f4f7f681d2a03aa5f68aad549d90eab853.
dev_queue_xmit_nit is expected to be called with BH disabled.
__dev_queue_xmit has the following:
/* Disable soft irqs for various locks below. Also
* stops preemption for RCU.
*/
rcu_read_lock_bh();
VRF must follow this invariant. The referenced commit removed this
protection. Which triggered a lockdep warning:
================================
WARNING: inconsistent lock state
6.11.0 #1 Tainted: G W
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x19a/0x4f0
_raw_spin_lock+0x27/0x40
packet_rcv+0xa33/0x1320
__netif_receive_skb_core.constprop.0+0xcb0/0x3a90
__netif_receive_skb_list_core+0x2c9/0x890
netif_receive_skb_list_internal+0x610/0xcc0
[...]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(rlock-AF_PACKET);
<Interrupt>
lock(rlock-AF_PACKET);
*** DEADLOCK ***
Call Trace:
<TASK>
dump_stack_lvl+0x73/0xa0
mark_lock+0x102e/0x16b0
__lock_acquire+0x9ae/0x6170
lock_acquire+0x19a/0x4f0
_raw_spin_lock+0x27/0x40
tpacket_rcv+0x863/0x3b30
dev_queue_xmit_nit+0x709/0xa40
vrf_finish_direct+0x26e/0x340 [vrf]
vrf_l3_out+0x5f4/0xe80 [vrf]
__ip_local_out+0x51e/0x7a0
[...]
Fixes: 504fc6f4f7f6 ("vrf: Remove unnecessary RCU-bh critical section")
Link: https://lore.kernel.org/netdev/20240925185216.1990381-1-greearb@candelatech.com/
Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240929061839.1175300-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This error handling has a typo. It should i++ instead of i--. In the
original code the error handling will loop until it crashes.
Fixes: da70d184a8c3 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/8e7960cc-415d-48d7-99ce-f623022ec7b5@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just like rtl8211f_led_hw_is_supported() and
rtl8211f_led_hw_control_set(), the rtl8211f_led_hw_control_get() also
needs to check the index value, otherwise the caller is likely to get
an incorrect rules.
Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20240927114610.1278935-1-hui.wang@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Networking receive path is usually handled from BH handler.
However, some protocols need to acquire the socket lock, and
packets might be stored in the socket backlog is the socket was
owned by a user process.
In this case, release_sock(), __release_sock(), and sk_backlog_rcv()
might call the sk->sk_backlog_rcv() handler in process context.
sybot caught ppp was not considering this case in
ppp_channel_bridge_input() :
WARNING: inconsistent lock state
6.11.0-rc7-syzkaller-g5f5673607153 #0 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/1/24 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline]
ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline]
ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304
pppoe_rcv_core+0xfc/0x314 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv include/net/sock.h:1111 [inline]
__release_sock+0x1a8/0x3d8 net/core/sock.c:3004
release_sock+0x68/0x1b8 net/core/sock.c:3558
pppoe_sendmsg+0xc8/0x5d8 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x374/0x4f4 net/socket.c:2204
__do_sys_sendto net/socket.c:2216 [inline]
__se_sys_sendto net/socket.c:2212 [inline]
__arm64_sys_sendto+0xd8/0xf8 net/socket.c:2212
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
irq event stamp: 282914
hardirqs last enabled at (282914): [<ffff80008b42e30c>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline]
hardirqs last enabled at (282914): [<ffff80008b42e30c>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194
hardirqs last disabled at (282913): [<ffff80008b42e13c>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (282913): [<ffff80008b42e13c>] _raw_spin_lock_irqsave+0x2c/0x7c kernel/locking/spinlock.c:162
softirqs last enabled at (282904): [<ffff8000801f8e88>] softirq_handle_end kernel/softirq.c:400 [inline]
softirqs last enabled at (282904): [<ffff8000801f8e88>] handle_softirqs+0xa3c/0xbfc kernel/softirq.c:582
softirqs last disabled at (282909): [<ffff8000801fbdf8>] run_ksoftirqd+0x70/0x158 kernel/softirq.c:928
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&pch->downl);
<Interrupt>
lock(&pch->downl);
*** DEADLOCK ***
1 lock held by ksoftirqd/1/24:
#0: ffff80008f74dfa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire+0x10/0x4c include/linux/rcupdate.h:325
stack backtrace:
CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call trace:
dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:319
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:326
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0xe4/0x150 lib/dump_stack.c:119
dump_stack+0x1c/0x28 lib/dump_stack.c:128
print_usage_bug+0x698/0x9ac kernel/locking/lockdep.c:4000
mark_lock_irq+0x980/0xd2c
mark_lock+0x258/0x360 kernel/locking/lockdep.c:4677
__lock_acquire+0xf48/0x779c kernel/locking/lockdep.c:5096
lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline]
ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304
ppp_async_process+0x98/0x150 drivers/net/ppp/ppp_async.c:495
tasklet_action_common+0x318/0x3f4 kernel/softirq.c:785
tasklet_action+0x68/0x8c kernel/softirq.c:811
handle_softirqs+0x2e4/0xbfc kernel/softirq.c:554
run_ksoftirqd+0x70/0x158 kernel/softirq.c:928
smpboot_thread_fn+0x4b0/0x90c kernel/smpboot.c:164
kthread+0x288/0x310 kernel/kthread.c:389
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Fixes: 4cf476ced45d ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls")
Reported-by: syzbot+bd8d55ee2acd0a71d8ce@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/66f661e2.050a0220.38ace9.000f.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Parkin <tparkin@katalix.com>
Cc: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20240927074553.341910-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2024-09-25
* tag 'mlx5-fixes-2024-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix crash caused by calling __xfrm_state_delete() twice
net/mlx5e: SHAMPO, Fix overflow of hd_per_wq
net/mlx5: HWS, changed E2BIG error to a negative return code
net/mlx5: HWS, fixed double-free in error flow of creating SQ
net/mlx5: Fix wrong reserved field in hca_cap_2 in mlx5_ifc
net/mlx5e: Fix NULL deref in mlx5e_tir_builder_alloc()
net/mlx5: Added cond_resched() to crdump collection
net/mlx5: Fix error path in multi-packet WQE transmit
====================
Link: https://patch.msgid.link/20240925202013.45374-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2024-09-27
Jinjie Ruan added the use of IRQF_NO_AUTOEN in the mcr20a driver and fixed
and addiotinal build dependency problem while doing so.
Jiawei Ye, ensured a correct RCU handling in mac802154_scan_worker.
* tag 'ieee802154-for-net-2024-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
net: ieee802154: mcr20a: Use IRQF_NO_AUTOEN flag in request_irq()
mac802154: Fix potential RCU dereference issue in mac802154_scan_worker
ieee802154: Fix build error
====================
Link: https://patch.msgid.link/20240927094351.3865511-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Increase the timeout for checking the busy bit of the VLAN Tag register
from 10µs to 500ms. This change is necessary to accommodate scenarios
where Energy Efficient Ethernet (EEE) is enabled.
Overnight testing revealed that when EEE is active, the busy bit can
remain set for up to approximately 300ms. The new 500ms timeout provides
a safety margin.
Fixes: ed64639bc1e0 ("net: stmmac: Add support for VLAN Rx filtering")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20240924205424.573913-1-shenwei.wang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The number of register fields cannot be assumed to be ALE_FIELDS_MAX
as some platforms can have lesser fields.
Solve this by embedding the actual number of fields available
in platform data and use that instead of ALE_FIELDS_MAX.
Gets rid of the below warning on BeagleBone Black
[ 1.007735] WARNING: CPU: 0 PID: 33 at drivers/base/regmap/regmap.c:1208 regmap_field_init+0x88/0x9c
[ 1.007802] invalid empty mask defined
[ 1.007812] Modules linked in:
[ 1.007842] CPU: 0 UID: 0 PID: 33 Comm: kworker/u4:3 Not tainted 6.11.0-01459-g508403ab7b74-dirty #840
[ 1.007867] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 1.007890] Workqueue: events_unbound deferred_probe_work_func
[ 1.007935] Call trace:
[ 1.007957] unwind_backtrace from show_stack+0x10/0x14
[ 1.007999] show_stack from dump_stack_lvl+0x50/0x64
[ 1.008033] dump_stack_lvl from __warn+0x70/0x124
[ 1.008077] __warn from warn_slowpath_fmt+0x194/0x1a8
[ 1.008113] warn_slowpath_fmt from regmap_field_init+0x88/0x9c
[ 1.008154] regmap_field_init from devm_regmap_field_alloc+0x48/0x64
[ 1.008193] devm_regmap_field_alloc from cpsw_ale_create+0xfc/0x320
[ 1.008251] cpsw_ale_create from cpsw_init_common+0x214/0x354
[ 1.008286] cpsw_init_common from cpsw_probe+0x4ac/0xb88
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/CAMuHMdUf-tKRDzkz2_m8qdFTFutefddU0NTratVrEjRTzA3yQQ@mail.gmail.com/
Fixes: 11cbcfeaa79e ("net: ethernet: ti: cpsw_ale: use regfields for number of Entries and Policers")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240924-am65-cpsw-multi-rx-fix-v1-1-0ca3fa9a1398@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no need to ask the user about enabling Microchip FDMA
functionality, as all drivers that use it select the FDMA symbol.
Hence make the symbol invisible, unless when compile-testing.
Fixes: 30e48a75df9c6ead ("net: microchip: add FDMA library")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/8e2bcd8899c417a962b7ee3f75b29f35b25d7933.1727171879.git.geert+renesas@glider.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On link-state change, the controller gets reset,
which clears all PTP registers, including PHC time,
calibrated clock correction values etc. For correct
IEEE 1588 operation we need to restore these after
the reset.
Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20240924093705.2897329-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On link state change, the controller gets reset,
causing PPS to drop out. Re-enable PPS if it was
enabled before the controller reset.
Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20240924093705.2897329-1-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The value is read from the register TXGBE_RX_GEN_CTL3, and it should be
written back to TXGBE_RX_GEN_CTL3 when it changes some fields.
Cc: stable@vger.kernel.org
Fixes: f629acc6f210 ("net: pcs: xpcs: support to switch mode for Wangxun NICs")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20240924022857.865422-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When applying padding, the buffer is not zeroed, which results in memory
disclosure. The mentioned data is observed on the wire. This patch uses
skb_put_padto() to pad Ethernet frames properly. The mentioned function
zeroes the expanded buffer.
In case the packet cannot be padded it is silently dropped. Statistics
are also not incremented. This driver does not support statistics in the
old 32-bit format or the new 64-bit format. These will be added in the
future. In its current form, the patch should be easily backported to
stable versions.
Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets
in hardware, so software padding must be applied.
Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240923214949.231511-2-olek2@wp.pl
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time.
But the pm_runtime_disable() and pm_runtime_dont_use_autosuspend()
is missing in the error path for bam_dmux_probe(). So add it.
Found by code review. Compile-tested only.
Fixes: 21a0ffd9b38c ("net: wwan: Add Qualcomm BAM-DMUX WWAN network driver")
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/20240911094234.1922418-1-ruanjinjie@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts and no adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
It looks like that most people are still traveling: both the ML volume
and the processing capacity are low.
Previous releases - regressions:
- netfilter:
- nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
- nf_tables: keep deleted flowtable hooks until after RCU
- tcp: check skb is non-NULL in tcp_rto_delta_us()
- phy: aquantia: fix -ETIMEDOUT PHY probe failure when firmware not
present
- eth: virtio_net: fix mismatched buf address when unmapping for
small packets
- eth: stmmac: fix zero-division error when disabling tc cbs
- eth: bonding: fix unnecessary warnings and logs from
bond_xdp_get_xmit_slave()
Previous releases - always broken:
- netfilter:
- fix clash resolution for bidirectional flows
- fix allocation with no memcg accounting
- eth: r8169: add tally counter fields added with RTL8125
- eth: ravb: fix rx and tx frame size limit"
* tag 'net-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
selftests: netfilter: Avoid hanging ipvs.sh
kselftest: add test for nfqueue induced conntrack race
netfilter: nfnetlink_queue: remove old clash resolution logic
netfilter: nf_tables: missing objects with no memcg accounting
netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n
netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
docs: tproxy: ignore non-transparent sockets in iptables
netfilter: ctnetlink: Guard possible unused functions
selftests: netfilter: nft_tproxy.sh: add tcp tests
selftests: netfilter: add reverse-clash resolution test case
netfilter: conntrack: add clash resolution for reverse collisions
netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash
selftests/net: packetdrill: increase timing tolerance in debug mode
usbnet: fix cyclical race on disconnect with work queue
net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled
virtio_net: Fix mismatched buf address when unmapping for small packets
bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()
r8169: add missing MODULE_FIRMWARE entry for RTL8126A rev.b
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup
of the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART
engine that that chip seems to have. Hopefully it's in a better
state now, but hardware designers still seem to come up with more
ways to make broken UARTS 40+ years after this all should have
finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems"
* tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: samsung: Fix serial rx on Apple A7-A9
tty: serial: samsung: Fix A7-A11 serial earlycon SError
tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
tty: rp2: Fix reset with non forgiving PCIe host bridges
serial: 8250_aspeed_vuart: Enable module autoloading
serial: qcom-geni: fix polled console corruption
serial: qcom-geni: disable interrupts during console writes
serial: qcom-geni: fix console corruption
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
serial: qcom-geni: fix false console tx restart
serial: qcom-geni: fix fifo polling timeout
tty: hvc: convert comma to semicolon
mxser: convert comma to semicolon
serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
serial: xilinx_uartps: Make cdns_rs485_supported static
...
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-balloon supports new stats
- vdpa supports setting mac address
- vdpa/mlx5 suspend/resume as well as MKEY ops are now faster
- virtio_fs supports new sysfs entries for queue info
- virtio/vsock performance has been improved
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vsock/virtio: avoid queuing packets when intermediate queue is empty
vsock/virtio: refactor virtio_transport_send_pkt_work
fw_cfg: Constify struct kobj_type
vdpa/mlx5: Postpone MR deletion
vdpa/mlx5: Introduce init/destroy for MR resources
vdpa/mlx5: Rename mr_mtx -> lock
vdpa/mlx5: Extract mr members in own resource struct
vdpa/mlx5: Rename function
vdpa/mlx5: Delete direct MKEYs in parallel
vdpa/mlx5: Create direct MKEYs in parallel
MAINTAINERS: add virtio-vsock driver in the VIRTIO CORE section
virtio_fs: add sysfs entries for queue information
virtio_fs: introduce virtio_fs_put_locked helper
vdpa: Remove unused declarations
vdpa/mlx5: Parallelize VQ suspend/resume for CVQ MQ command
vdpa/mlx5: Small improvement for change_num_qps()
vdpa/mlx5: Keep notifiers during suspend but ignore
vdpa/mlx5: Parallelize device resume
vdpa/mlx5: Parallelize device suspend
vdpa/mlx5: Use async API for vq modify commands
...
|
|
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 5fabb01207a2 ("net: stmmac: Add initial XDP support") sets
PP_FLAG_DMA_SYNC_DEV flag for page_pool unconditionally,
page_pool_recycle_direct() will call page_pool_dma_sync_for_device()
on every page even the page is not going to be reused by XDP program.
When XDP is not enabled, the page which holds the received buffer
will be recycled once the buffer is copied into new SKB by
skb_copy_to_linear_data(), then the MAC core will never reuse this
page any longer. Always setting PP_FLAG_DMA_SYNC_DEV wastes CPU cycles
on unnecessary calling of page_pool_dma_sync_for_device().
After this patch, up to 9% noticeable performance improvement was observed
on certain platforms.
Fixes: 5fabb01207a2 ("net: stmmac: Add initial XDP support")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20240919121028.1348023-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the virtio-net driver will perform a pre-dma-mapping for
small or mergeable RX buffer. But for small packets, a mismatched address
without VIRTNET_RX_PAD and xdp_headroom is used for unmapping.
That will result in unsynchronized buffers when SWIOTLB is enabled, for
example, when running as a TDX guest.
This patch unifies the address passed to the virtio core as the address of
the virtnet header and fixes the mismatched buffer address.
Changes from v2: unify the buf that passed to the virtio core in small
and merge mode.
Changes from v1: Use ctx to get xdp_headroom.
Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Wenbo Li <liwenbo.martin@bytedance.com>
Signed-off-by: Jiahui Cen <cenjiahui@bytedance.com>
Signed-off-by: Ying Fang <fangying.tommy@bytedance.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20240919081351.51772-1-liwenbo.martin@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The km.state is not checked in driver's delayed work. When
xfrm_state_check_expire() is called, the state can be reset to
XFRM_STATE_EXPIRED, even if it is XFRM_STATE_DEAD already. This
happens when xfrm state is deleted, but not freed yet. As
__xfrm_state_delete() is called again in xfrm timer, the following
crash occurs.
To fix this issue, skip xfrm_state_check_expire() if km.state is not
XFRM_STATE_VALID.
Oops: general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP
CPU: 5 UID: 0 PID: 7448 Comm: kworker/u102:2 Not tainted 6.11.0-rc2+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_sw_limits [mlx5_core]
RIP: 0010:__xfrm_state_delete+0x3d/0x1b0
Code: 0f 84 8b 01 00 00 48 89 fd c6 87 c8 00 00 00 05 48 8d bb 40 10 00 00 e8 11 04 1a 00 48 8b 95 b8 00 00 00 48 8b 85 c0 00 00 00 <48> 89 42 08 48 89 10 48 8b 55 10 48 b8 00 01 00 00 00 00 ad de 48
RSP: 0018:ffff88885f945ec8 EFLAGS: 00010246
RAX: dead000000000122 RBX: ffffffff82afa940 RCX: 0000000000000036
RDX: dead000000000100 RSI: 0000000000000000 RDI: ffffffff82afb980
RBP: ffff888109a20340 R08: ffff88885f945ea0 R09: 0000000000000000
R10: 0000000000000000 R11: ffff88885f945ff8 R12: 0000000000000246
R13: ffff888109a20340 R14: ffff88885f95f420 R15: ffff88885f95f400
FS: 0000000000000000(0000) GS:ffff88885f940000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2163102430 CR3: 00000001128d6001 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? die_addr+0x33/0x90
? exc_general_protection+0x1a2/0x390
? asm_exc_general_protection+0x22/0x30
? __xfrm_state_delete+0x3d/0x1b0
? __xfrm_state_delete+0x2f/0x1b0
xfrm_timer_handler+0x174/0x350
? __xfrm_state_delete+0x1b0/0x1b0
__hrtimer_run_queues+0x121/0x270
hrtimer_run_softirq+0x88/0xd0
handle_softirqs+0xcc/0x270
do_softirq+0x3c/0x50
</IRQ>
<TASK>
__local_bh_enable_ip+0x47/0x50
mlx5e_ipsec_handle_sw_limits+0x7d/0x90 [mlx5_core]
process_one_work+0x137/0x2d0
worker_thread+0x28d/0x3a0
? rescuer_thread+0x480/0x480
kthread+0xb8/0xe0
? kthread_park+0x80/0x80
ret_from_fork+0x2d/0x50
? kthread_park+0x80/0x80
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: b2f7b01d36a9 ("net/mlx5e: Simulate missing IPsec TX limits hardware functionality")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When having larger RQ sizes and small MTUs sizes, the hd_per_wq variable
can overflow. Like in the following case:
$> ethtool --set-ring eth1 rx 8192
$> ip link set dev eth1 mtu 144
$> ethtool --features eth1 rx-gro-hw on
... yields in dmesg:
mlx5_core 0000:08:00.1: mlx5_cmd_out_err:808:(pid 194797): CREATE_MKEY(0x200) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x3bf6f), err(-22)
because hd_per_wq is 64K which overflows to 0 and makes the command
fail.
This patch increases the variable size to 32 bit.
Fixes: 99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fixed all the 'E2BIG' returns in error flow of functions to
the negative '-E2BIG' as we are using negative error codes
everywhere in HWS code.
This also fixes the following smatch warnings:
"warn: was negative '-E2BIG' intended?"
Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/f8c77688-7d83-4937-baba-ac844dfe2e0b@stanley.mountain/
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When SQ creation fails, call the appropriate mlx5_core destroy function.
This fixes the following smatch warnings:
divers/net/ethernet/mellanox/mlx5/core/steering/hws/mlx5hws_send.c:739
hws_send_ring_open_sq() warn: 'sq->dep_wqe' double freed
hws_send_ring_open_sq() warn: 'sq->wq_ctrl.buf.frags' double freed
hws_send_ring_open_sq() warn: 'sq->wr_priv' double freed
Fixes: 2ca62599aa0b ("net/mlx5: HWS, added send engine and context handling")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/e4ebc227-4b25-49bf-9e4c-14b7ea5c6a07@stanley.mountain/
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In mlx5e_tir_builder_alloc() kvzalloc() may return NULL
which is dereferenced on the next line in a reference
to the modify field.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a6696735d694 ("net/mlx5e: Convert TIR to a dedicated object")
Signed-off-by: Elena Salomatkina <esalomatkina@ispras.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Collecting crdump involves reading vsc registers from pci config space
of mlx device, which can take long time to complete. This might result
in starving other threads waiting to run on the cpu.
Numbers I got from testing ConnectX-5 Ex MCX516A-CDAT in the lab:
- mlx5_vsc_gw_read_block_fast() was called with length = 1310716.
- mlx5_vsc_gw_read_fast() reads 4 bytes at a time. It was not used to
read the entire 1310716 bytes. It was called 53813 times because
there are jumps in read_addr.
- On average mlx5_vsc_gw_read_fast() took 35284.4ns.
- In total mlx5_vsc_wait_on_flag() called vsc_read() 54707 times.
The average time for each call was 17548.3ns. In some instances
vsc_read() was called more than one time when the flag was not set.
As expected the thread released the cpu after 16 iterations in
mlx5_vsc_wait_on_flag().
- Total time to read crdump was 35284.4ns * 53813 ~= 1.898s.
It was seen in the field that crdump can take more than 5 seconds to
complete. During that time mlx5_vsc_wait_on_flag() did not release the
cpu because it did not complete 16 iterations. It is believed that pci
config reads were slow. Adding cond_resched() every 128 register read
improves the situation. In the common case the, crdump takes ~1.8989s,
the thread yields the cpu every ~4.51ms. If crdump takes ~5s, the thread
yields the cpu every ~18.0ms.
Fixes: 8b9d8baae1de ("net/mlx5: Add Crdump support")
Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove the erroneous unmap in case no DMA mapping was established
The multi-packet WQE transmit code attempts to obtain a DMA mapping for
the skb. This could fail, e.g. under memory pressure, when the IOMMU
driver just can't allocate more memory for page tables. While the code
tries to handle this in the path below the err_unmap label it erroneously
unmaps one entry from the sq's FIFO list of active mappings. Since the
current map attempt failed this unmap is removing some random DMA mapping
that might still be required. If the PCI function now presents that IOVA,
the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI
function in error state.
The erroneous behavior was seen in a stress-test environment that created
memory pressure.
Fixes: 5af75c747e2a ("net/mlx5e: Enhanced TX MPWQE for SKBs")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, commands that qualify as throttled can't be used via the
async API. That's due to the fact that the throttle semaphore can sleep
but the async API can't.
This patch allows throttling in the async API by using the tentative
variant of the semaphore and upon failure (semaphore at 0) returns EBUSY
to signal to the caller that they need to wait for the completion of
previously issued commands.
Furthermore, make sure that the semaphore is released in the callback.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
|
|
syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce
this[1], one bond device (bond1) has xdpdrv, which increases
bpf_master_redirect_enabled_key. Another bond device (bond0) which is
unsupported by XDP but its slave (veth3) has xdpgeneric that returns
XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect().
To reduce unnecessary warnings and improve log management, we need to
delete the WARN_ON_ONCE() and add ratelimit to the netdev_err().
[1] Steps to reproduce:
# Needs tx_xdp with return XDP_TX;
ip l add veth0 type veth peer veth1
ip l add veth3 type veth peer veth4
ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP
ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default
ip l set veth0 master bond1
ip l set bond1 up
# Increases bpf_master_redirect_enabled_key
ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx
ip l set veth3 master bond0
ip l set bond0 up
ip l set veth4 up
# Triggers WARN_ON_ONCE() from the xdp_master_redirect()
ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx
Reported-by: syzbot+c187823a52ed505b2257@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c187823a52ed505b2257
Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Jiwon Kim <jiwonaid0@gmail.com>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20240918140602.18644-1-jiwonaid0@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a missing MODULE_FIRMWARE entry.
Fixes: 69cb89981c7a ("r8169: add support for RTL8126A rev.b")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/bb307611-d129-43f5-a7ff-bdb6b4044fce@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The RX frame size limit should not be based on the current MTU setting.
Instead it should be based on the hardware capabilities.
While we're here, improve the description of the receive frame length
setting as suggested by Niklas.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The datasheets for all SoCs using the GbEth IP specify a maximum
transmission frame size of 1.5 kByte. I've confirmed through internal
discussions that support for 1522 byte frames has been validated, which
allows us to support the default MTU of 1500 bytes after reserving space
for the Ethernet header, frame checksums and an optional VLAN tag.
Fixes: 2e95e08ac009 ("ravb: Add rx_max_buf_size to struct ravb_hw_info")
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider
when offload is disabled") allows the "port_transmit_rate_kbps" to be
set to a value of 0, which is then passed to the "div_s64" function when
tc-cbs is disabled. This leads to a zero-division error.
When tc-cbs is disabled, the idleslope, sendslope, and credit values the
credit values are not required to be configured. Therefore, adding a return
statement after setting the txQ mode to DCB when tc-cbs is disabled would
prevent a zero-division error.
Fixes: b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled")
Cc: <stable@vger.kernel.org>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: KhaiWenTan <khai.wen.tan@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240918061422.1589662-1-khai.wen.tan@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RTL8125 added fields to the tally counter, what may result in the chip
dma'ing these new fields to unallocated memory. Therefore make sure
that the allocated memory area is big enough to hold all of the
tally counter values, even if we use only parts of it.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/741d26a9-2b2b-485d-91d9-ecb302e345b5@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
for_each_set_bit was used wrongly in aqr107_config_init() when iterating
over LEDs. Drop misleading 'index' variable and call
aqr_phy_led_active_low_set() for each set bit representing an LED which
is driven by VDD instead of GND pin.
Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting
in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit.
Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit.
Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/ab963584b0a7e3b4dac39472a4b82ca264d79630.1726580902.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
|
|
ep93xx_eth.c:805:40: sparse: sparse: incorrect type in argument 2
(different address spaces)
ep93xx_eth.c:805:40: sparse: expected unsigned char const [usertype] *addr
ep93xx_eth.c:805:40: sparse: got void [noderef] __iomem *
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409212354.9CiUem7B-lkp@intel.com/
Fixes: 858555bb5598 ("net: cirrus: add DT support for Cirrus EP93xx")
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Bit 270-271 are occasionally unexpectedly set by the hardware. This issue
was observed with 10G SFPs causing huge time errors (> 30ms) in PTP. Only
30 bits are needed for the nanosecond part of the timestamp, clear 2 most
significant bits before extracting timestamp from the internal frame
header.
Fixes: 70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping")
Signed-off-by: Aakash Menon <aakash.menon@protempis.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Condition
In the ether3_probe function, a timer is initialized with a callback
function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is
started, there is a risk of a race condition if the module or device
is removed, triggering the ether3_remove function to perform cleanup.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ether3_ledoff
ether3_remove |
free_netdev(dev); |
put_devic |
kfree(dev); |
| ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
| // use dev
Fix it by ensuring that the timer is canceled before proceeding with
the cleanup in ether3_remove.
Fixes: 6fd9c53f7186 ("net: seeq: Convert timers to use timer_setup()")
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Link: https://patch.msgid.link/20240915144045.451-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
axienet_free_tx_chain returns the number of DMA descriptors it's
handled. However, axienet_tx_poll treats the return as the number of
packets. When scatter-gather SKBs are enabled, a single packet may use
multiple DMA descriptors, which causes incorrect packet counts. Fix this
by explicitly keepting track of the number of packets processed as
separate from the DMA descriptors.
Budget does not affect the number of Tx completions we can process for
NAPI, so we use the ring size as the limit instead of budget. As we no
longer return the number of descriptors processed to axienet_tx_poll, we
now update tx_bd_ci in axienet_free_tx_chain.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240913145156.2283067-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As advised by Documentation/networking/napi.rst, masking IRQs after
calling napi_schedule can be racy. Avoid this by only masking/scheduling
if napi_schedule_prep returns true.
Fixes: 9e2bc267e780 ("net: axienet: Use NAPI for TX completion path")
Fixes: cc37610caaf8 ("net: axienet: implement NAPI and GRO receive")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240913145711.2284295-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
