summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwifiex/main.h
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18mwifiex: move under marvell vendor directoryKalle Valo1-1579/+0
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: complete usb tx data with multi endpointsZhaoyang Liu1-0/+1
This patch do the work to TX data with specific USB endpoint. At the same time, update data_sent flag according to multi port status. And is_port_ready API is added for BSS interface to check if current used usb data endpoint is available or not. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: add usb multi endpoints resync supportZhaoyang Liu1-0/+3
This patch add support for usb multi endpoints resync. Once multi channel event is received from firmware, update usb_mc_setp flag to block TX data until setup is over. And available data endpoint will be attached to BSS interface. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: add usb multi channel event process supportZhaoyang Liu1-0/+2
This patch add multi channel event process for USB multi tx data endpoints. Driver receives firmware multi channel event only in case that new connection is setup or interface is disconnect. Different BSS interface need update used usb endpoint. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: fix driver init failure under memory pressureXinming Hu1-0/+2
64k Tx and Rx buffers are allocated during driver initialization for SDIO level data aggregations. When host is under memory pressure situation, kzalloc() request for 64k may fail. We will try allocating 32k buffers and disable our rx single port aggreagation feature in this situation. If the allocation still fails, we will disable our sdio multport aggregation feature as well. In this way, we will transmit and receive packets one by one, thus reduce the demand for big memory. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: Make mwifiex_dbg a function, reduce object sizeJoe Perches1-9/+8
The mwifiex_dbg macro has two tests that could be consolidated into a function reducing overall object size ~10KB (~4%). So convert the macro into a function. $ size drivers/net/wireless/mwifiex/built-in.o* (x86-64 defconfig) text data bss dec hex filename 233102 8628 4809 246539 3c30b drivers/net/wireless/mwifiex/built-in.o.new 243949 8628 4809 257386 3ed6a drivers/net/wireless/mwifiex/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-13mwifiex: fix unable to connect hidden SSID AP on DFS channelchunfan chen1-0/+2
We will check if any hidden SSID found in passive scan channels and do specific SSID active scan for those channels. Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: handle multichannel eventAvinash Patil1-0/+2
This patch adds support to handle multichannel event from FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: advertise multichannel support to cfg80211Avinash Patil1-0/+1
This patch adds support to advetise mwifiex multichannel support to cfg80211. If module parameter drcs is enabled and FW supports multichannel operation we advertise this support to cfg80211. As of now 2 simultaneous channels are supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: extend tx_data pause to AP interface as wellAvinash Patil1-0/+2
This patch adds support to extend TX Data pause for AP intefaces. Also for station role, support for pausing/unpausing all traffic when mac address parameter is BSSID is added. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: enable traffic only when port is openAvinash Patil1-0/+1
This patch adds support to enable data traffic only when port is open. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: support for bypass tx queueAvinash Patil1-0/+2
This patch adds support for another TX queue in driver- bypass TX queue. This queue is used for sending data/mgmt packets while in disconnected state i.e. when port is yet not unblocked. TDLS setup packets would also be queued in this queue. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: update domain_info upon band change in start_apAvinash Patil1-0/+2
It was observed that AP beacons would not reflect correct regulatory information upon starting AP in A band. This was because of missing AP config band update in set_channel of start_ap. Also we configure 11D settings info FW only for specific band. So we need to download domain info to FW even if domain remains unchanged but band is changed. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: enhance tdls link setup conditionXinming Hu1-0/+15
TDLS link status - channel switching, off channel or base channel itself indicates that TDLS link is setup. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: add tdls config commandXinming Hu1-0/+7
This patch add support for a new tdls configuration command which is used for configuration of tdls channel switch parameters. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: add tdls channel switch statusXinming Hu1-0/+3
This patch add new tdls status used for tdls channel switch. Driver in turn would block cmd path and data path if tdls channel switching. Data path to non tdls peer should be blocked if tdls channel switch to off-channel. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: add tx data pause supportAvinash Patil1-0/+3
This patch adds support to enable TX data pause feature for mwifiex. Whenever FW TX buffers reach threshold, FW would send TX pause event to driver. Driver in turn would block data traffic to that particular receiver address. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15mwifiex: handle BT coex event to adjust Rx BA window sizeChunfan Chen1-1/+13
If timeshare coexistance between bluetooth and WLAN gets enabled, firmware will give host an event to reduce Rx AMPDU BA window size. The event is handled in this patch. Signed-off-by: Chunfan Chen <jeffc@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: parse power constraint IE from TailAvinash Patil1-0/+3
This patch adds support to parse power constraint IEs from Tail buffer. This power constraint is then set to FW during bss_config download. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: maintain station statistic in uap modeXinming Hu1-0/+13
This patch maintain statistic information for the stations associated to the mwifiex micro AP, include tx/rx bytes/packets, signal strength, tx bitrate. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: add cfg80211 get_channel handlerXinming Hu1-1/+4
This patch add cfg80211 get_channel handler for mwifiex. The handler will be used to report current channel to upper layer utility. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08mwifiex: disable CAC upon radar detection eventAvinash Patil1-0/+2
This patch adds support to disable ongoing CAC in FW upon detecting radar during CAC period. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-02mwifiex: device dump support via devcoredump frameworkAmitkumar Karwar1-1/+2
Currently device dump generated in the driver is retrieved using ethtool set/get dump commands. We will get rid of ethtool approach and use devcoredump framework. Device dump can be trigger by cat /debugfs/mwifiex/mlanX/device_dump and when the dump operation is completed, data can be read by cat /sys/class/devcoredump/devcdX/data We have prepared following script to split device dump data into multiple files. [root]# cat mwifiex_split_dump_data.sh #!/bin/bash # usage: ./mwifiex_split_dump_data.sh dump_data fw_dump_data=$1 mem_type="driverinfo ITCM DTCM SQRAM APU CIU ICU MAC" for name in ${mem_type[@]} do sed -n "/Start dump $name/,/End dump/p" $fw_dump_data > tmp.$name.log if [ ! -s tmp.$name.log ] then rm -rf tmp.$name.log else #Remove the describle info "Start dump" and "End dump" sed '1d' tmp.$name.log | sed '$d' > /data/$name.log if [ -s /data/$name.log ] then echo "generate /data/$name.log" else sed '1d' tmp.$name.log | sed '$d' > /var/$name.log echo "generate /var/$name.log" fi rm -rf tmp.$name.log fi done Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-02mwifiex: use generic name 'device dump'Amitkumar Karwar1-3/+3
Currently we are dumping driver information also inside firmware dump API. We will call it as device dump and dump driver and firmware data separately. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26mwifiex: add dump data debug supportZhaoyang Liu1-0/+9
This patch is to add support for data hexdump debug feature. It is controlled by level debug_mask in adapter structure. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26mwifiex: add prints debug ctrl supportZhaoyang Liu1-0/+40
This patch adds support for debugging print control in mwifiex driver. The debug level can be controlled via either by modules load parameter debug_mask or by writing to debug_mask in debugfs file. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26mwifiex: add support for FW memory read/write operationsChin-ran Lo1-0/+1
This patch adds support for FW memory read/write operations via debugfs. This is useful during debugging FW issues. Examples: For reading FW memory location: echo r 0x01ac > /sys/kernel/debug/mwifiex/mlan0/memrw cat /sys/kernel/debug/mwifiex/mlan0/memrw For writing FW memory location: echo w 0x01ac 0x55aa > /sys/kernel/debug/mwifiex/mlan0/memrw Signed-off-by: Chin-ran Lo <crlo@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-04-01Merge tag 'wireless-drivers-next-for-davem-2015-04-01' of ↵David S. Miller1-8/+22
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: ath9k: * add Active Interference Cancellation, a method implemented in the HW to counter WLAN RX > sensitivity degradation when BT is transmitting at the same time. This feature is supported by cards like WB222 based on AR9462. iwlwifi: * Location Aware Regulatory was added by Arik * 8000 device family work * update to the BT Coex firmware API brmcfmac: * add new BCM43455 and BCM43457 SDIO device support * add new BCM43430 SDIO device support wil6210: * take care of AP bridging * fix NAPI behavior * found approach to achieve 4*n+2 alignment of Rx frames rt2x00: * add new rt2800usb device DWA 130 rtlwifi: * add USB ID for D-Link DWA-131 * add USB ID ASUS N10 WiFi dongle mwifiex: * throughput enhancements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31Merge tag 'mac80211-next-for-davem-2015-03-30' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Lots of updates for net-next; along with the usual flurry of small fixes, cleanups and internal features we have: * VHT support for TDLS and IBSS (conditional on drivers though) * first TX performance improvements (the biggest will come later) * many suspend/resume (race) fixes * name_assign_type support from Tom Gundersen ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-30cfg80211: pass name_assign_type to rdev_add_virtual_intf()Tom Gundersen1-0/+1
This will expose in /sys whether the ifname of a device is set by userspace or generated by the kernel. The latter kind (wlanX, etc) is not deterministic, so userspace needs to rename these devices to names that are guaranteed to stay the same between reboots. The former, however should never be renamed, so userspace needs to be able to reliably tell the difference. Similar functionality was introduced for the rtnetlink core in commit 5517750f058e ("net: rtnetlink - make create_link take name_assign_type") Signed-off-by: Tom Gundersen <teg@jklm.no> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: Johannes Berg <johannes@sipsolutions.net> [reformat changelog to fit 72 cols] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mwifiex: Fix issue in the SDIO reset path of mwifiex.Maithili Hinge1-2/+0
SDIO reset was not happening properly on mwifiex as cancel_work_sync in mwifiex_sdio_remove used to kill the calling work function itself. Due to this, the interface was not getting removed and card was not getting added again. Reset work function has been made independent of adapter variable and cancel_work_sync has been moved to cleanup function. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: add SDIO rx single port aggregationZhaoyang Liu1-0/+4
This patch brings in support for SDIO single port rx aggregation to mwifiex. Maximum read size support by SDIO cmd53 is 64K. Based on multi port aggregation which is already part of mwifiex, idea here is multiple packets received in FW can be aggregated into single buffer. A separate upload type is defined for such packet aggregated to single port. Packets from this single buffer are later deaggregated into individual packets. This way, driver can receive more packets each time through single SDIO cmd53; thereby reducing no of times MMC bus is accessed. SDIO SP aggregation support is advertised by FW during load time and driver would get FW block size in command response of HostCmd_CMD_SDIO_SP_RX_AGGR_CFG. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: preprocess packets from TX queueZhaoyang Liu1-0/+6
During profiling, we discovered that driver remains idle for time when pakcet is downloaded to FW but no TX_DONE has been received i.e. while data_sent is true. This patch adds enhancement to TX routine where we preprocess packets from TX queue, make them ready for TX and add them to separate TX queue. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Chin-ran Lo <crlo@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: get rid of BA setup helper functionsZhaoyang Liu1-5/+8
This patch removes BA setup helper routines mwifiex_is_bastream_setup and mwifiex_is_amsdu_in_ampdu_allowed. Current code will use two functions to check bastream setup and amsdu in ampdu. This patch change these functions to flags, thus avoiding redundant spin_lock check while dequeuing TX packets. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: avoid queue_work while work is ongoingShengzhen Li1-0/+1
Current code does not check whether main_work_queue or rx_work_queue is running when preparing to do queue_work, this code fix add check before calling queue_work, reducing unnecessary queue_work switch. This change instead sets more_task flag to ensure we run main_process superloop once again. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: rename alloc_rx_buf to alloc_dma_aligned_bufAvinash Patil1-1/+1
Rename this function to reflect its purpose correctly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: lock main process till reinitialization of vif is overAvinash Patil1-0/+1
A crash was detected while changing virtual interface type is in progress. This was tracked to race condition in accessing bss_priority table while change is in progress. This patch ensures that main_process and rx_process works are locked while we change virtual interface. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: Add support for auto ARP in mwifiex.Maithili Hinge1-0/+1
This patch adds support for auto ARP feature in mwifiex. The device will respond to ARP requests from the network with ARP response in suspended state without waking up the host. This feature is enabled in the driver by default. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27mwifiex: DMA alignment for RX packetsAvinash Patil1-0/+4
This patch adds support for DMA alignment of sk_buffs allocated for RX. Patch also adds support to modify skb allocation flags. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27mwifiex: more_task flag for main_processShengzhen Li1-0/+1
This patch handles a corner case where TX packet would remain in driver queue till next packet comes in. Here is sequence: 1. TX packet is queued via hard_start_xmit and main_work is queued 2. SDIO interrupt comes in which directly call mwifiex_main_process. This starts executing main superloop. 3. Now work from step1 is scheduled but at first check itself it sees mwifiex_processing is set and exits. 4. Now if superloop from step2 has passed TX processing part of superloop this packet would remain in queue until next packet/command/SDIO interrupt arrives and queues main_work. This patch fixes this corner case by defining more_task flag which is set when mwifiex_processing is found to be true. At end of superloop we again check if more_task flag is set and if set, execute superloop again. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: 11h handling for AP interfaceAvinash Patil1-0/+5
This patch enables 11h extensions in FW upon detecting DFS channel in start radar detection/channel switch handlers. Patch also takes care of disabling 11h when non DFS channels are to be set during start_ap handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: channel switch support for mwifiexAvinash Patil1-0/+5
This patch adds cfg80211 channel_switch support for mwifiex. Upon receiving channel switch request, driver would parse channel switch announcement IE from beacon_data. If TX is blocked, netdev queues are stopped. IEs from csa_beacon are then parsed and set to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: handle radar detect event from FWAvinash Patil1-0/+2
This patch adds support for radar_detected event from FW. Driver in turn would stop netdev queues to stop TX traffic and issue RADAR_DETECT event to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: support for channel report for radar detectionAvinash Patil1-0/+2
This patch adds support for channel report enabling. Channel report event happens if radar is detected on specified channel after driver has issued radar detect command within CAC time. Driver in turn sends RADAR_DETECTED event to cfg80211 to tell radar was detected within CAC time. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: add cfg80211 start_radar_detection handlerAvinash Patil1-0/+10
This patch adds support for cfg80211 start_radar_detection handler. Upon reception of start_radar_detection, driver prepares radar detect command to FW. Delayed work is queued for CAC time which sends radar detection finished event to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: separate function for parsing head and tail IEsAvinash Patil1-1/+1
Head & Tail IEs are supposed to be added to beacon and probe response. This patch adds separate function for parsing head and tail IEs from cfg80211_beacon_data and sets them to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: refactor start_ap handlerAvinash Patil1-0/+4
Refactor mwifiex_cfg80211_start_ap by creating separate function to set AP channel and another for configuring other AP parameters and starting AP. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: store AP configuration in private structureAvinash Patil1-0/+1
Store AP configuration in private structure so that we know current AP configuration. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: support conversion to any virtual interface typeAvinash Patil1-2/+0
Currently, we support virtual interface type change from station<=>adhoc or station <=> p2p client/GO. This patch adds support to change virtual interface type to any of the type advertised in interface combinations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: manage virtual interface limits efficientlyAvinash Patil1-0/+21
Currently interface limits are checked by seeing if bss_mode for particular priv is set. If bss_mode is not set, interface creation is allowed. This patch adds framework to initializes maximum virtual interfaces supported during load time and check current number of interfaces created agains allowed interface limit during new virtual interface creation. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>