| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
hsr_get_port_ndev calls hsr_for_each_port, which need to hold rcu lock.
On the other hand, before return the port device, we need to hold the
device reference to avoid UaF in the caller function.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 9c10dd8eed74 ("net: hsr: Create and export hsr_get_port_ndev()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the TX completion packet stage of TI SoCs with CPSW2G instance, which
has single external ethernet port, ndev is accessed without being
initialized if no TX packets have been processed. It results into null
pointer dereference, causing kernel to crash. Fix this by having a check
on the number of TX packets which have been processed.
Fixes: 9a369ae3d143 ("net: ethernet: ti: am65-cpsw: remove am65_cpsw_nuss_tx_compl_packets_2g()")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250829121051.2031832-1-c-vankar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
reload.
To enable HSR / Switch offload, certain configurations are needed.
Currently they are done inside icssg_change_mode(). This function only
gets called if we move from one mode to another without bringing the
links up / down.
Once in HSR / Switch mode, if we bring the links down and bring it back
up again. The callback sequence is,
- emac_ndo_stop()
Firmwares are stopped
- emac_ndo_open()
Firmwares are loaded
In this path icssg_change_mode() doesn't get called and as a result the
configurations needed for HSR / Switch is not done.
To fix this, put all these configurations in a separate function
icssg_enable_fw_offload() and call this from both icssg_change_mode()
and emac_ndo_open()
Fixes: 56375086d093 ("net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20250814105106.1491871-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The variable ret in icss_iep_extts_enable() was incorrectly declared
as u32, while the function returns int and may return negative error
codes. This will cause sign extension issues and incorrect error
propagation. Update ret to be int to fix error handling.
This change corrects the declaration to avoid potential type mismatch.
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250805142323.1949406-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When link settings are changed emac->speed is populated by
emac_adjust_link(). The link speed and other settings are then written into
the DRAM. However if both ports are brought down after this and brought up
again or if the operating mode is changed and a firmware reload is needed,
the DRAM is cleared by icssg_config(). As a result the link settings are
lost.
Fix this by calling emac_adjust_link() after icssg_config(). This re
populates the settings in the DRAM after a new firmware load.
Fixes: 9facce84f406 ("net: ti: icssg-prueth: Fix firmware load sequence.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <20250805173812.2183161-1-danishanwar@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
emac_rx_packet() is a common function for handling traffic
for both xdp and non-xdp use cases. Use common logic for
handling skb with or without xdp to prevent any incorrect
packet processing. This patch fixes ping working with
XDP_PASS for icssg driver.
Fixes: 62aa3246f4623 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250803180216.3569139-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure to drop the references to the IEP OF node and device taken by
of_parse_phandle() and of_find_device_by_node() when looking up IEP
devices during probe.
Drop the bogus additional reference taken on successful lookup so that
the device is released correctly by icss_iep_put().
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
Cc: stable@vger.kernel.org # 6.6
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide cleanup of struct cycle_counter const annotations.
The initial idea of making them const was correct as they were
seperate instances. When they got embedded into larger data
structures, which are even modified by the callback this got moot. The
only reason why this went unnoticed is that the required
container_of() casts the const attribute forcefully away.
Stop pretending that it is const"
* tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/timecounter: Fix the lie that struct cyclecounter is const
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc8).
Conflicts:
drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make icssg-prueth access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-12-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes overlapping buffer allocation for ICSSG peripheral
used for storing packets to be received/transmitted.
There are 3 buffers:
1. Buffer for Locally Injected Packets
2. Buffer for Forwarding Packets
3. Buffer for Host Egress Packets
In existing allocation buffers for 2. and 3. are overlapping causing
packet corruption.
Packet corruption observations:
During tcp iperf testing, due to overlapping buffers the received ack
packet overwrites the packet to be transmitted. So, we see packets on
wire with the ack packet content inside the content of next TCP packet
from sender device.
Details for AM64x switch mode:
-> Allocation by existing driver:
+---------+-------------------------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------+--------------+--------+------+--------------+--------+
| | Slot | Base Address | Size | Slot | Base Address | Size |
|---------+------+--------------+--------+------+--------------+--------+
| | 0 | 70000000 | 0x2000 | 0 | 70010000 | 0x2000 |
| | 1 | 70002000 | 0x2000 | 1 | 70012000 | 0x2000 |
| | 2 | 70004000 | 0x2000 | 2 | 70014000 | 0x2000 |
| FWD | 3 | 70006000 | 0x2000 | 3 | 70016000 | 0x2000 |
| Buffers | 4 | 70008000 | 0x2000 | 4 | 70018000 | 0x2000 |
| | 5 | 7000A000 | 0x2000 | 5 | 7001A000 | 0x2000 |
| | 6 | 7000C000 | 0x2000 | 6 | 7001C000 | 0x2000 |
| | 7 | 7000E000 | 0x2000 | 7 | 7001E000 | 0x2000 |
+---------+------+--------------+--------+------+--------------+--------+
| | 8 | 70020000 | 0x1000 | 8 | 70028000 | 0x1000 |
| | 9 | 70021000 | 0x1000 | 9 | 70029000 | 0x1000 |
| | 10 | 70022000 | 0x1000 | 10 | 7002A000 | 0x1000 |
| Our | 11 | 70023000 | 0x1000 | 11 | 7002B000 | 0x1000 |
| LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 |
| Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 |
| | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 |
| | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
| | 16 | 70024000 | 0x1000 | 16 | 7002C000 | 0x1000 |
| | 17 | 70025000 | 0x1000 | 17 | 7002D000 | 0x1000 |
| | 18 | 70026000 | 0x1000 | 18 | 7002E000 | 0x1000 |
| Their | 19 | 70027000 | 0x1000 | 19 | 7002F000 | 0x1000 |
| LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 |
| Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 |
| | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 |
| | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
--> here 16, 17, 18, 19 overlapping with below express buffer
+-----+-----------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------------+----------+------------+----------+
| | Start addr | End addr | Start addr | End addr |
+-----+------------+----------+------------+----------+
| EXP | 70024000 | 70028000 | 7002C000 | 70030000 | <-- Overlapping
| PRE | 70030000 | 70033800 | 70034000 | 70037800 |
+-----+------------+----------+------------+----------+
+---------------------+----------+----------+
| | SLICE 0 | SLICE 1 |
+---------------------+----------+----------+
| Default Drop Offset | 00000000 | 00000000 | <-- Field not configured
+---------------------+----------+----------+
-> Allocation this patch brings:
+---------+-------------------------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------+--------------+--------+------+--------------+--------+
| | Slot | Base Address | Size | Slot | Base Address | Size |
|---------+------+--------------+--------+------+--------------+--------+
| | 0 | 70000000 | 0x2000 | 0 | 70040000 | 0x2000 |
| | 1 | 70002000 | 0x2000 | 1 | 70042000 | 0x2000 |
| | 2 | 70004000 | 0x2000 | 2 | 70044000 | 0x2000 |
| FWD | 3 | 70006000 | 0x2000 | 3 | 70046000 | 0x2000 |
| Buffers | 4 | 70008000 | 0x2000 | 4 | 70048000 | 0x2000 |
| | 5 | 7000A000 | 0x2000 | 5 | 7004A000 | 0x2000 |
| | 6 | 7000C000 | 0x2000 | 6 | 7004C000 | 0x2000 |
| | 7 | 7000E000 | 0x2000 | 7 | 7004E000 | 0x2000 |
+---------+------+--------------+--------+------+--------------+--------+
| | 8 | 70010000 | 0x1000 | 8 | 70050000 | 0x1000 |
| | 9 | 70011000 | 0x1000 | 9 | 70051000 | 0x1000 |
| | 10 | 70012000 | 0x1000 | 10 | 70052000 | 0x1000 |
| Our | 11 | 70013000 | 0x1000 | 11 | 70053000 | 0x1000 |
| LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 |
| Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 |
| | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 |
| | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
| | 16 | 70014000 | 0x1000 | 16 | 70054000 | 0x1000 |
| | 17 | 70015000 | 0x1000 | 17 | 70055000 | 0x1000 |
| | 18 | 70016000 | 0x1000 | 18 | 70056000 | 0x1000 |
| Their | 19 | 70017000 | 0x1000 | 19 | 70057000 | 0x1000 |
| LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 |
| Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 |
| | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 |
| | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 |
+---------+------+--------------+--------+------+--------------+--------+
+-----+-----------------------------------------------+
| | SLICE 0 | SLICE 1 |
| +------------+----------+------------+----------+
| | Start addr | End addr | Start addr | End addr |
+-----+------------+----------+------------+----------+
| EXP | 70018000 | 7001C000 | 70058000 | 7005C000 |
| PRE | 7001C000 | 7001F800 | 7005C000 | 7005F800 |
+-----+------------+----------+------------+----------+
+---------------------+----------+----------+
| | SLICE 0 | SLICE 1 |
+---------------------+----------+----------+
| Default Drop Offset | 7001F800 | 7005F800 |
+---------------------+----------+----------+
Rootcause: missing buffer configuration for Express frames in
function: prueth_fw_offload_buffer_setup()
Details:
Driver implements two distinct buffer configuration functions that are
invoked based on the driver state and ICSSG firmware:-
- prueth_fw_offload_buffer_setup()
- prueth_emac_buffer_setup()
During initialization, driver creates standard network interfaces
(netdevs) and configures buffers via prueth_emac_buffer_setup().
This function properly allocates and configures all required memory
regions including:
- LI buffers
- Express packet buffers
- Preemptible packet buffers
However, when the driver transitions to an offload mode (switch/HSR/PRP),
buffer reconfiguration is handled by prueth_fw_offload_buffer_setup().
This function does not reconfigure the buffer regions required for
Express packets, leading to incorrect buffer allocation.
Fixes: abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
Signed-off-by: Himanshu Mittal <h-mittal1@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717094220.546388-1-h-mittal1@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc6).
No conflicts.
Adjacent changes:
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible")
b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_shared_info
While transitioning from netdev_alloc_ip_align() to build_skb(), memory
for the "skb_shared_info" member of an "skb" was not allocated. Fix this
by allocating "PAGE_SIZE" as the skb length, accounting for the packet
length, headroom and tailroom, thereby including the required memory space
for skb_shared_info.
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://patch.msgid.link/20250707085201.1898818-1-c-vankar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In both the read callback for struct cyclecounter, and in struct
timecounter, struct cyclecounter is declared as a const pointer.
Unfortunatly, a number of users of this pointer treat it as a non-const
pointer as it is burried in a larger structure that is heavily modified by
the callback function when accessed. This lie had been hidden by the fact
that container_of() "casts away" a const attribute of a pointer without any
compiler warning happening at all.
Fix this all up by removing the const attribute in the needed places so
that everyone can see that the structure really isn't const, but can,
and is, modified by the users of it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
|
|
All am65-cpsw controllers have a fixed TX delay, so the PHY interface
mode must be fixed up to account for this.
Modes that claim to a delay on the PCB can't actually work. Warn people
to update their Device Trees if one of the unsupported modes is specified.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/9b3fb1fbf719bef30702192155c6413cd5de5dcf.1750756583.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for ICSSG PRP mode which supports offloading of:
- Packet duplication and PRP trailer insertion
- Packet duplicate discard and PRP trailer removal
Signed-off-by: Himanshu Mittal <h-mittal1@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618175536.430568-1-h-mittal1@ti.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While transmitting XDP frames for XDP_TX, page_pool is
used to get the DMA buffers (already mapped to the pages)
and need to be freed/reycled once the transmission is complete.
This need not be explicitly done by the driver as this is handled
more gracefully by the xdp driver while returning the xdp frame.
__xdp_return() frees the XDP memory based on its memory type,
under which page_pool memory is also handled. This change fixes
the transmit queue timeout while running XDP_TX.
logs:
[ 309.069682] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 45860 ms
[ 313.933780] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 50724 ms
[ 319.053656] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 55844 ms
...
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250616063319.3347541-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the way firmware names are handled for the ICSSG PRUETH driver.
Instead of using hardcoded firmware name arrays for different modes (EMAC,
SWITCH, HSR), the driver now reads the firmware names from the device tree
property "firmware-name". Only the EMAC firmware names are specified in the
device tree property. The firmware names for all other supported modes are
generated dynamically based on the EMAC firmware names by replacing
substrings (e.g., "eth" with "sw" or "hsr") as appropriate.
Example: Below are the firmwares used currently for PRU0 core
EMAC: ti-pruss/am65x-sr2-pru0-prueth-fw.elf
SW : ti-pruss/am65x-sr2-pru0-prusw-fw.elf
HSR : ti-pruss/am65x-sr2-pru0-pruhsr-fw.elf
All three firmware names are same except for the operating mode.
In general for PRU0 core, firmware name is,
ti-pruss/am65x-sr2-pru0-pru<mode>-fw.elf
Since the EMAC firmware names are defined in DT, driver will read those
directly and for other modes swap the mode name. i.e. eth -> sw or
eth -> hsr.
This preserves backwards compatibility as ICSSG driver is supported only
by AM65x and AM64x. Both of these have "firmware-name" property
populated in their device tree.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613064547.44394-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
In MII mode, Tx lines are swapped for port0 and port1, which means
Tx port0 receives data from PRU1 and the Tx port1 receives data from
PRU0. This is an expected hardware behavior and reading the Tx stats
needs to be handled accordingly in the driver. Update the driver to
read Tx stats from the PRU1 for port0 and PRU0 for port1.
Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250603052904.431203-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939a5 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using random mac address is not an error since the driver continues to
function, it should be informative that the system has not assigned
a MAC address. This is inline with other drivers such as ax88796c,
dm9051 etc. Drop the error level to info level.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cpsw->slaves[slave_no].phy should be equal to netdev->phydev, because it
is assigned from phy_attach_direct(). The latter is indirectly called
from the two identically named cpsw_slave_open() functions, one in
cpsw.c and another in cpsw_new.c.
Thus, the driver should not need custom logic to find the PHY, the core
can find it, and phy_do_ioctl_running() achieves exactly that.
However, that is only the case for cpsw_new and for the cpsw driver in
dual EMAC mode. This is explained in more detail in the previous commit.
Thus, allow the simpler core logic to execute for cpsw_new, and move
cpsw_ndo_ioctl() to cpsw.c.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250512114422.4176010-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the two cpsw drivers to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
The cpsw_hwtstamp_get() and cpsw_hwtstamp_set() methods (and their shim
definitions, for the case where CONFIG_TI_CPTS is not enabled) must have
their prototypes adjusted.
These methods are used by two drivers (cpsw and cpsw_new), with vastly
different configurations:
- cpsw has two operating modes:
- "dual EMAC" - enabled through the "dual_emac" device tree property -
creates one net_device per EMAC / slave interface (but there is no
bridging offload)
- "switch mode" - default - there is a single net_device, with two
EMACs/slaves behind it (and switching between them happens
unbeknownst to the network stack).
- cpsw_new always registers one net_device for each EMAC which doesn't
have status = "disabled". In terms of switching, it has two modes:
- "dual EMAC": default, no switching between ports, no switchdev
offload.
- "switch mode": enabled through the "switch_mode" devlink parameter,
offloads the Linux bridge through switchdev
Essentially, in 3 out of 4 operating modes, there is a bijective
relation between the net_device and the slave. Timestamping can thus be
configured on individual slaves. But in the "switch mode" of the cpsw
driver, ndo_eth_ioctl() targets a single slave, designated using the
"active_slave" device tree property.
To deal with these different cases, the common portion of the drivers,
cpsw_priv.c, has the cpsw_slave_index() function pointer, set to
separate, identically named cpsw_slave_index_priv() by the 2 drivers.
This is all relevant because cpsw_ndo_ioctl() has the old-style
phy_has_hwtstamp() logic which lets the PHY handle the timestamping
ioctls. Normally, that logic should be obsoleted by the more complex
logic in the core, which permits dynamically selecting the timestamp
provider - see dev_set_hwtstamp_phylib().
But I have doubts as to how this works for the "switch mode" of the dual
EMAC driver, because the core logic only engages if the PHY is visible
through ndev->phydev (this is set by phy_attach_direct()).
In cpsw.c, we have:
cpsw_ndo_open()
-> for_each_slave(priv, cpsw_slave_open, priv); // continues on errors
-> of_phy_connect()
-> phy_connect_direct()
-> phy_attach_direct()
OR
-> phy_connect()
-> phy_connect_direct()
-> phy_attach_direct()
The problem for "switch mode" is that the behavior of phy_attach_direct()
called twice in a row for the same net_device (once for each slave) is
probably undefined.
For sure it will overwrite dev->phydev. I don't see any explicit error
checks for this case, and even if there were, the for_each_slave() call
makes them non-fatal to cpsw_ndo_open() anyway.
I have no idea what is the extent to which this provides a usable
result, but the point is: only the last attached PHY will be visible
in dev->phydev, and this may well be a different PHY than
cpsw->slaves[slave_no].phy for the "active_slave".
In dual EMAC mode, as well as in cpsw_new, this should not be a problem.
I don't know whether PHY timestamping is a use case for the cpsw "switch
mode" as well, and I hope that there isn't, because for the sake of
simplicity, I've decided to deliberately break that functionality, by
refusing all PHY timestamping. Keeping it would mean blocking the old
API from ever being removed. In the new dev_set_hwtstamp_phylib() API,
it is not possible to operate on a phylib PHY other than dev->phydev,
and I would very much prefer not adding that much complexity for bizarre
driver decisions.
Final point about the cpsw_hwtstamp_get() conversion: we don't need to
propagate the unnecessary "config.flags = 0;", because dev_get_hwtstamp()
provides a zero-initialized struct kernel_hwtstamp_config.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250512114422.4176010-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc6).
No conflicts.
Adjacent changes:
net/core/dev.c:
08e9f2d584c4 ("net: Lock netdevices during dev_shutdown")
a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending out any kind of traffic, it is essential that the driver
keeps reporting BQL of the number of bytes that have been sent so that
BQL can track the amount of data in the queue and prevents it from
overflowing. If BQL is not reported, the driver may continue sending
packets even when the queue is full, leading to packet loss, congestion
and decreased network performance. Currently this is missing in
emac_xmit_xdp_frame() and this patch fixes it.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-4-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add __netif_tx_lock() to ensure that only one packet is being
transmitted at a time to avoid race conditions in the netif_txq
struct and prevent packet data corruption. Failing to do so causes
kernel panic with the following error:
[ 2184.746764] ------------[ cut here ]------------
[ 2184.751412] kernel BUG at lib/dynamic_queue_limits.c:99!
[ 2184.756728] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
logs: https://gist.github.com/MeghanaMalladiTI/9c7aa5fc3b7fb03f87c74aad487956e9
The lock is acquired before calling emac_xmit_xdp_frame() and released after the
call returns. This ensures that the TX queue is protected from concurrent access
during the transmission of XDP frames.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-3-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xdp_features demonstrates what all XDP capabilities are supported
on a given network device. The driver needs to set these xdp_features
flag to let the network stack know what XDP features a given driver
is supporting. These flags need to be set for a given ndev irrespective
of any XDP program being loaded or not.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-2-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ICSSG firmware maintains set of stats called PA_STATS.
Currently the driver only dumps 4 stats. Add support for dumping more
stats.
The offset for different stats are defined as MACROs in icssg_switch_map.h
file. All the offsets are for Slice0. Slice1 offsets are slice0 + 4.
The offset calculation is taken care while reading the stats in
emac_update_hardware_stats().
The statistics are documented in
Documentation/networking/device_drivers/icssg_prueth.rst
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20250424095316.2643573-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc3).
No conflicts. Adjacent changes:
tools/net/ynl/pyynl/ynl_gen_c.py
4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place")
7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case.
Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
emac_xmit_xdp_frame()
There is an error check inside emac_xmit_xdp_frame() function which
is called when the driver wants to transmit XDP frame, to check if
the allocated tx descriptor is NULL, if true to exit and return
ICSSG_XDP_CONSUMED implying failure in transmission.
In this case trying to free a descriptor which is NULL will result
in kernel crash due to NULL pointer dereference. Fix this error handling
and increase netdev tx_dropped stats in the caller of this function
if the function returns ICSSG_XDP_CONSUMED.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During network interface initialization, the NIC driver needs to register
its Rx queue with the XDP, to ensure the incoming XDP buffer carries a
pointer reference to this info and is stored inside xdp_rxq_info.
While this struct isn't tied to XDP prog, if there are any changes in
Rx queue, the NIC driver needs to stop the Rx queue by unregistering
with XDP before purging and reallocating memory. Drop page_pool destroy
during Rx channel reset as this is already handled by XDP during
xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the
following warning:
warning logs: https://gist.github.com/MeghanaMalladiTI/eb627e5dc8de24e42d7d46572c13e576
Fixes: 46eeb90f03e0 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
of_get_mac_address() might fetch the MAC address from NVMEM and that
driver might not have been loaded. In that case, -EPROBE_DEFER is
returned. Right now, this will trigger an immediate fallback to
am65_cpsw_am654_get_efuse_macid() possibly resulting in a random MAC
address although the MAC address is stored in the referenced NVMEM.
Fix it by handling the -EPROBE_DEFER return code correctly. This also
means that the creation of the MDIO device has to be moved to a later
stage as -EPROBE_DEFER must not be returned after child devices are
created.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250414084336.4017237-3-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fwnode needs to be set for a device for fw_devlink to be able to
track/enforce its dependencies correctly. Without this, you'll see error
messages like this when the supplier has probed and tries to make sure
all its fwnode consumers are linked to it using device links:
am65-cpsw-nuss 8000000.ethernet: Failed to create device link (0x180) with supplier ..
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20250414084336.4017237-2-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A reference to the device tree node is stored in a private struct, thus
the reference count has to be incremented. Also, decrement the count on
device removal and in the error path.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250414083942.4015060-1-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc2).
Conflict:
Documentation/networking/netdevices.rst
net/core/lock_debug.c
04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE")
03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
txq_trans_update() currently uses txq->xmit_lock_owner
to conditionally update txq->trans_start.
For regular devices, txq->xmit_lock_owner is updated
from HARD_TX_LOCK() and HARD_TX_UNLOCK(), and this apparently
causes cpu stalls.
Using dev->lltx, which sits in a read-mostly cache-line,
and already used in HARD_TX_LOCK() and HARD_TX_UNLOCK()
helps cpu prediction.
On an AMD EPYC 7B12 dual socket server, tcp_rr with 128 threads
and 30,000 flows gets a 5 % increase in throughput.
As explained in commit 95ecba62e2fd ("net: fix races in
netdev_tx_sent_queue()/dev_watchdog()") I am planning
to no longer update txq->trans_start in the fast path
in a followup patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250408202742.2145516-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"The dmaengine subsystem updates for this cycle consist of a new driver
(Microchip) along with couple of yaml binding conversions, core api
updates and bunch of driver updates etc.
New HW support:
- Microchip sama7d65 dma controller
- Yaml conversion of atmel dma binding and Freescale Elo DMA
Controller binding
Core:
- Remove device_prep_dma_imm_data() API as users are removed
- Reduce scope of some less frequently used DMA request channel APIs
with aim to cleanup these in future
Updates:
- Drop Fenghua Yu from idxd maintainers, as he changed jobs
- AMD ptdma support for multiqueue and ae4dma deprecated PCI IDs
removal"
* tag 'dmaengine-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (29 commits)
dmaengine: ptdma: Utilize the AE4DMA engine's multi-queue functionality
dmaengine: ae4dma: Use the MSI count and its corresponding IRQ number
dmaengine: ae4dma: Remove deprecated PCI IDs
dmaengine: Remove device_prep_dma_imm_data from struct dma_device
dmaengine: ti: edma: support sw triggered chans in of_edma_xlate()
dmaengine: ti: k3-udma: Enable second resource range for BCDMA and PKTDMA
dmaengine: fsl-edma: free irq correctly in remove path
dmaengine: fsl-edma: cleanup chan after dma_async_device_unregister
dt-bindings: dma: snps,dw-axi-dmac: Allow devices to be marked as noncoherent
dmaengine: dmatest: Fix dmatest waiting less when interrupted
dt-bindings: dma: Convert fsl,elo*-dma to YAML
dt-bindings: dma: fsl-mxs-dma: Add compatible string for i.MX8 chips
dmaengine: Fix typo in comment
dmaengine: ti: k3-udma-glue: Drop skip_fdq argument from k3_udma_glue_reset_rx_chn
dmaengine: bcm2835-dma: fix warning when CONFIG_PM=n
dt-bindings: dma: fsl,edma: Add i.MX94 support
dt-bindings: dma: atmel: add microchip,sama7d65-dma
dmaengine: img-mdc: remove incorrect of_match_ptr annotation
dmaengine: idxd: Delete unnecessary NULL check
dmaengine: pxa: Enable compile test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
Set metadata size building the skb from xdp_buff in cpsw/cpsw_new
drivers. ti cpsw and cpsw_new drivers set xdp headroom at least to
CPSW_HEADROOM_NA:
CPSW_HEADROOM_NA max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + NET_IP_ALIGN
so the headroom is large enough to contain xdp_frame and xdp metadata.
Please note this patch is just compiled tested.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250318-mvneta-xdp-meta-v2-7-b6075778f61f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad761 ("selftest: net: add proc_net_pktgen")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711acb8 ("selftests: net: Add test cases for link and peer netns")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the API emac_update_hardware_stats() reads different ICSSG
stats without any lock protection.
This API gets called by .ndo_get_stats64() which is only under RCU
protection and nothing else. Add lock to this API so that the reading of
statistics happens during lock.
Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314102721.1394366-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Registering the interrupts for TX or RX DMA Channels prior to registering
their respective NAPI callbacks can result in a NULL pointer dereference.
This is seen in practice as a random occurrence since it depends on the
randomness associated with the generation of traffic by Linux and the
reception of traffic from the wire.
Fixes: 681eb2beb3ef ("net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Co-developed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250311154259.102865-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add native XDP support. We do not support zero copy yet.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We have different cases for SWDATA (skb, page, cmd, etc)
so it is better to have a dedicated data structure for that.
We can embed the type field inside the struct and use it
to interpret the data in completion handlers.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
