| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Implement cleanup of descriptors in the TSO error path of
fec_enet_txq_submit_tso(). The cleanup
- Unmaps DMA buffers for data descriptors skipping TSO header
- Clears all buffer descriptors
- Handles extended descriptors by clearing cbd_esc when enabled
Fixes: 79f339125ea3 ("net: fec: Add software TSO support")
Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250120085430.99318-1-dheeraj.linuxdev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc8).
Conflicts:
drivers/net/ethernet/realtek/r8169_main.c
1f691a1fc4be ("r8169: remove redundant hwmon support")
152d00a91396 ("r8169: simplify setting hwmon attribute visibility")
https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command")
f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref")
drivers/net/ethernet/intel/ice/ice_type.h
50327223a8bb ("ice: add lock to protect low latency interface")
dc26548d729e ("ice: Fix quad registers read on E825")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current neg_mode into phylink_mii_c22_pcs_get_state() and
phylink_mii_c22_pcs_decode_state(). Update all users of phylink PCS
that use these functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeY-000Et9-8g@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current neg_mode into the .pcs_get_state() method. Update all
users of phylink PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeT-000Et3-4L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did
not handle the case when it returned NULL. There was a WARN_ON(!new_page)
but it would still proceed to use the NULL pointer and then crash.
This case does seem somewhat rare but when the system is under memory
pressure it can happen. One case where I can duplicate this with some
frequency is when writing over a smbd share to a SATA HDD attached to an
imx6q.
Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve
the problem for my test case. But it still seems wrong that the fec driver
ignores the memory allocation error and can crash.
This commit handles the allocation error by dropping the current packet.
Fixes: 95698ff6177b5 ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit d7811e623dd4 ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set NETIF_F_GSO_UDP_L4 bit of hw_features and features because i.MX95
enetc and LS1028A driver implements UDP segmentation.
- i.MX95 ENETC supports UDP segmentation via LSO.
- LS1028A ENETC supports UDP segmentation since the commit 3d5b459ba0e3
("net: tso: add UDP segmentation support").
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241219054755.1615626-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENETC rev 4.1 supports large send offload (LSO), segmenting large TCP
and UDP transmit units into multiple Ethernet frames. To support LSO,
software needs to fill some auxiliary information in Tx BD, such as LSO
header length, frame length, LSO maximum segment size, etc.
At 1Gbps link rate, TCP segmentation was tested using iperf3, and the
CPU performance before and after applying the patch was compared through
the top command. It can be seen that LSO saves a significant amount of
CPU cycles compared to software TSO.
Before applying the patch:
%Cpu(s): 0.1 us, 4.1 sy, 0.0 ni, 85.7 id, 0.0 wa, 0.5 hi, 9.7 si
After applying the patch:
%Cpu(s): 0.1 us, 2.3 sy, 0.0 ni, 94.5 id, 0.0 wa, 0.4 hi, 2.6 si
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20241219054755.1615626-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The max chained Tx BDs of latest ENETC (i.MX95 ENETC, rev 4.1) has been
increased to 63, but since the range of MAX_SKB_FRAGS is 17~45, so for
i.MX95 ENETC and later revision, it is better to set ENETC4_MAX_SKB_FRAGS
to MAX_SKB_FRAGS.
In addition, add max_frags in struct enetc_drvdata to indicate the max
chained BDs supported by device. Because the max number of chained BDs
supported by LS1028A and i.MX95 ENETC is different.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241219054755.1615626-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In addition to supporting Rx checksum offload, i.MX95 ENETC also supports
Tx checksum offload. The transmit checksum offload is implemented through
the Tx BD. To support Tx checksum offload, software needs to fill some
auxiliary information in Tx BD, such as IP version, IP header offset and
size, whether L4 is UDP or TCP, etc.
Same as Rx checksum offload, Tx checksum offload capability isn't defined
in register, so tx_csum bit is added to struct enetc_drvdata to indicate
whether the device supports Tx checksum offload.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20241219054755.1615626-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initially, xdp_frame::mem.id was used to search for the corresponding
&page_pool to return the page correctly.
However, after that struct page was extended to have a direct pointer
to its PP (netmem has it as well), further keeping of this field makes
no sense. xdp_return_frame_bulk() still used it to do a lookup, and
this leftover is now removed.
Remove xdp_frame::mem and replace it with ::mem_type, as only memory
type still matters and we need to know it to be able to free the frame
correctly.
As a cute side effect, we can now make every scalar field in &xdp_frame
of 4 byte width, speeding up accesses to them.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than maintaining a private copy of the LPI timer, make use of
the LPI timer maintained by phylib. In any case, phylib overwrites the
value of tx_lpi_timer set by the driver in phy_ethtool_get_eee().
Note that feb->eee.tx_lpi_timer is initialised to zero, which is just
the same with phylib's copy, so there should be no functional change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/E1tKzVS-006c67-IJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rtnl_fdb_dump() and various ndo_fdb_dump() helpers share
a hidden layout of cb->ctx.
Before switching rtnl_fdb_dump() to for_each_netdev_dump()
in the following patch, make this more explicit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241209100747.2269613-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
get resource + request_mem_region + ioremap can all be done by a single
function.
Replace them with devm_platform_get_and_ioremap_resource or\
devm_platform_ioremap_resource where res is not used.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> # sja1000_platform.c
Link: https://patch.msgid.link/20241203231337.182391-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ucc_geth is quite capable in terms of supported interfaces, and even
includes an externally controlled PCS (well, TBI). Port that driver to
phylink.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A number of parallel MII interfaces also exist in a "Reduced" mode,
usually with higher clock rates and fewer data lines, to ease the
hardware design. This is what the 'R' stands for in RGMII, RMII, RTBI,
RXAUI, etc.
The UCC Geth controller has a special configuration bit that needs to be
set when the MII mode is one of the supported reduced modes.
Add a local helper for that.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The uec_configure_serdes() function deals with serialized linkmodes
settings. It's used during the link bringup sequence. It is planned to
be used during the phylink conversion for mac configuration, but it
needs to me moved around in the process. To make the phylink port
clearer, this commit moves the function without any feature change.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The preamble length can be configured in ucc_geth, however it just
ends-up always being configured to 7 bytes, as nothing ever changes the
default value of 7.
Make that value the default value when the MACCFG2 register gets
initialized, and remove the code to configure that value altogether.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The frame length check is configured when the phy interface is setup.
However, it's configured according to an internal flag that is always
false. So, just make so that we disable the relevant bit in the MACCFG2
register upon accessing it for other MAC configuration operations.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The WoL opts are represented through a bitmask stored in a u32. As this
mask is copied as-is in the driver, make sure we use the exact same type
to store them internally.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The get/set_wol ethtool ops rely on querying the PHY for its WoL
capabilities, checking for the presence of a PHY and a PHY interrupts
isn't enough. Address that by cleaning up the WoL configuration
sequence.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As this driver pre-dates phylib, it uses a private pointer to get a
reference to the attached phy_device. Drop that pointer and use the
netdev's pointer instead.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Preparing the phylink conversion, split the adjust_link callbaclk, by
clearly separating the mac configuration, link_up and link_down phases.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In april 2007, ucc_geth was converted to phylib with :
commit 728de4c927a3 ("ucc_geth: migrate ucc_geth to phylib").
In that commit, the device-tree property "interface", that could be used to
retrieve the PHY interface mode was deprecated.
DTS files that still used that property were converted along the way, in
the following commit, also dating from april 2007 :
commit 0fd8c47cccb1 ("[POWERPC] Replace undocumented interface properties in dts files")
17 years later, there's no users of that property left and I hope it's
safe to say we can remove support from that in the ucc_geth driver,
making the probe() function a bit simpler.
Should there be any users that have a DT that was generated when 2.6.21 was
cutting-edge, print an error message with hints on how to convert the
devicetree if the 'interface' property is found.
With that property gone, we can greatly simplify the parsing of the
phy-interface-mode from the devicetree by using of_get_phy_mode(),
allowing the removal of the open-coded parsing in the driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure
MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs()
to configure preemptible TCs. However, only PF is able to configure
preemptible TCs. Because only PF has related registers, while VF does not
have these registers. So for VF, its hw->port pointer is NULL. Therefore,
VF will access an invalid pointer when accessing a non-existent register,
which will cause a crash issue. The simplified log is as follows.
root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \
mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1
[ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00
[ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400
[ 187.511140] Call trace:
[ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.518918] enetc_setup_tc_mqprio+0x180/0x214
[ 187.523374] enetc_vf_setup_tc+0x1c/0x30
[ 187.527306] mqprio_enable_offload+0x144/0x178
[ 187.531766] mqprio_init+0x3ec/0x668
[ 187.535351] qdisc_create+0x15c/0x488
[ 187.539023] tc_modify_qdisc+0x398/0x73c
[ 187.542958] rtnetlink_rcv_msg+0x128/0x378
[ 187.547064] netlink_rcv_skb+0x60/0x130
[ 187.550910] rtnetlink_rcv+0x18/0x24
[ 187.554492] netlink_unicast+0x300/0x36c
[ 187.558425] netlink_sendmsg+0x1a8/0x420
[ 187.606759] ---[ end trace 0000000000000000 ]---
In addition, some PFs also do not support configuring preemptible TCs,
such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs,
but we should prevent these PFs from accessing these unimplemented
registers.
Fixes: 827145392a4a ("net: enetc: only commit preemptible TCs to hardware when MM TX is active")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Configuring TSN (Qbv, Qbu, PSFP) capabilities requires access to port
registers, which are available to the PSI but not the VSI.
Yet, the SI port capability register 0 (PSICAPR0), exposed to both PSIs
and VSIs, presents the same capabilities to the VF as to the PF, thus
leading the VF driver into thinking it can configure these features.
In the case of ENETC_SI_F_QBU, having it set in the VF leads to a crash:
root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \
mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1
[ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00
[ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400
[ 187.511140] Call trace:
[ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.518918] enetc_setup_tc_mqprio+0x180/0x214
[ 187.523374] enetc_vf_setup_tc+0x1c/0x30
[ 187.527306] mqprio_enable_offload+0x144/0x178
[ 187.531766] mqprio_init+0x3ec/0x668
[ 187.535351] qdisc_create+0x15c/0x488
[ 187.539023] tc_modify_qdisc+0x398/0x73c
[ 187.542958] rtnetlink_rcv_msg+0x128/0x378
[ 187.547064] netlink_rcv_skb+0x60/0x130
[ 187.550910] rtnetlink_rcv+0x18/0x24
[ 187.554492] netlink_unicast+0x300/0x36c
[ 187.558425] netlink_sendmsg+0x1a8/0x420
[ 187.606759] ---[ end trace 0000000000000000 ]---
while the other TSN features in the VF are harmless, because the
net_device_ops used for the VF driver do not expose entry points for
these other features.
These capability bits are in the process of being defeatured from the SI
registers. We should read them from the port capability register, where
they are also present, and which is naturally only exposed to the PF.
The change to blame (relevant for stable backports) is the one where
this started being a problem, aka when the kernel started to crash due
to the wrong capability seen by the VF driver.
Fixes: 827145392a4a ("net: enetc: only commit preemptible TCs to hardware when MM TX is active")
Reported-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We recently added this error path. We need to call enetc_pci_remove()
before returning. It cleans up the resources from enetc_pci_probe().
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/93888efa-c838-4682-a7e5-e6bf318e844e@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When nvmem is not ready, of_get_ethdev_address returns -EPROBE_DEFER. In
such a case, return -EPROBE_DEFER to avoid not having a proper MAC
address.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241104210127.307420-5-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoids having to unregister manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241104210127.307420-4-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoids manual frees. Removes one goto.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241104210127.307420-3-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoids manual frees for it. Funny enough the free in _remove should be
the last thing done.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241104210127.307420-2-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20241105093125.1087202-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sparse provides the following output:
warning: cast to restricted __be32
This is a harmless warning due to the fact that we dereference the hash
stored in the FD using an incorrect type annotation. Suppress the
warning by using the correct __be32 type instead of u32. No functional
change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20241029164317.50182-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multi-buffer frame descriptors (FDs) point to a buffer holding a
scatter/gather table (SGT), which is a finite array of fixed-size
entries, the last of which has qm_sg_entry_is_final(&sgt[i]) == true.
Each SGT entry points to a buffer holding pieces of the frame.
DPAARM.pdf explains in the figure called "Internal and External Margins,
Scatter/Gather Frame Format" that the SGT table is located within its
buffer at the same offset as the frame data start is located within the
first packet buffer.
+------------------------+
Scatter/Gather Buffer | First Buffer | Last Buffer
^ +------------+ ^ +-|---->^ +------------+ +->+------------+
| | | | ICEOF | | | | | |////////////|
| +------------+ v | | | | | |////////////|
BSM | |/ part of //| | |BSM | | | |////////////|
| |/ Internal /| | | | | | |////////////|
| |/ Context //| | | | | | |// Frame ///|
| +------------+ | | | | | ... |/ content //|
| | | | | | | | |////////////|
| | | | | | | | |////////////|
v +------------+ | | v +------------+ |////////////|
| Scatter/ //| sgt[0]--+ | |// Frame ///| |////////////|
| Gather List| ... | |/ content //| +------------+ ^
|////////////| sgt[N]----+ |////////////| | | | BEM
|////////////| |////////////| | | |
+------------+ +------------+ +------------+ v
BSM = Buffer Start Margin, BEM = Buffer End Margin, both are configured
by dpaa_eth_init_rx_port() for the RX FMan port relevant here.
sg_fd_to_skb() runs in the calling context of rx_default_dqrr() -
the NAPI receive callback - which only expects to receive contiguous
(qm_fd_contig) or scatter/gather (qm_fd_sg) frame descriptors.
Everything else is irrelevant codewise.
The processing done by sg_fd_to_skb() is weird because it does not
conform to the expectations laid out by the aforementioned figure.
Namely, it parses the OFFSET field only for SGT entries with i != 0
(codewise, skb != NULL). In those cases, OFFSET should always be 0.
Also, it does not parse the OFFSET field for the sgt[0] case, the only
case where the buffer offset is meaningful in this context. There, it
uses the fd_off, aka the offset to the Scatter/Gather List in the
Scatter/Gather Buffer from the figure. By equivalence, they should both
be equal to the BSM (in turn, equal to priv->rx_headroom).
This can actually be explained due to the bug which we had in
qm_sg_entry_get_off() until the previous change:
- qm_sg_entry_get_off() did not actually _work_ for sgt[0]. It returned
zero even with a non-zero offset, so fd_off had to be used as a fill-in.
- qm_sg_entry_get_off() always returned zero for sgt[i>0], and that
resulted in no user-visible bug, because the buffer offset _was
supposed_ to be zero for those buffers. So remove it from calculations.
Add assertions about the OFFSET field in both cases (first or subsequent
SGT entries) to make it absolutely obvious when something is not well
handled.
Similar logic can be seen in the driver for the architecturally similar
DPAA2, where dpaa2_eth_build_frag_skb() calls dpaa2_sg_get_offset() only
for i == 0. For the rest, there is even a comment stating the same thing:
* Data in subsequent SG entries is stored from the
* beginning of the buffer, so we don't need to add the
* sg_offset.
Tested on LS1046A.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20241029164317.50182-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The i.MX95 ENETC has been upgraded to revision 4.1, which is different
from the LS1028A ENETC (revision 1.0) except for the SI part. Therefore,
the fsl-enetc driver is incompatible with i.MX95 ENETC PF. So add new
nxp-enetc4 driver to support i.MX95 ENETC PF, and this driver will be
used to support the ENETC PF with major revision 4 for other SoCs in the
future.
Currently, the nxp-enetc4 driver only supports basic transmission feature
for i.MX95 ENETC PF, the more basic and advanced features will be added
in the subsequent patches. In addition, PCS support has not been added
yet, so 10G ENETC (ENETC instance 2) is not supported now.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a situation where num_tx_rings cannot be divided by bdr_int_num.
For example, num_tx_rings is 8 and bdr_int_num is 3. According to the
previous logic, this results in two tx_bdr corresponding memories not
being allocated, so when sending packets to tx ring 6 or 7, wild pointers
will be accessed. Of course, this issue doesn't exist on LS1028A, because
its num_tx_rings is 8, and bdr_int_num is either 1 or 2. However, there
is a risk for the upcoming i.MX95. Therefore, it is necessary to ensure
that each tx_bdr can be allocated to the corresponding memory.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract enetc_int_vector_init() and enetc_int_vector_destroy() from
enetc_alloc_msix() so that the code is more concise and readable.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The verdor ID and device ID of i.MX95 EMDIO are different from LS1028A
EMDIO, so add new vendor ID and device ID to pci_device_id table to
support i.MX95 EMDIO.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ERR050089 workaround causes performance degradation and potential
functional issues (e.g., RCU stalls) under certain workloads. Since
new SoCs like i.MX95 do not require this workaround, use a static key
to compile out enetc_lock_mdio() and enetc_unlock_mdio() at runtime,
improving performance and avoiding unnecessary logic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Compile enetc_pf_common.c as a standalone module to allow shared usage
between ENETC v1 and v4 PF drivers. Add struct enetc_pf_ops to register
different hardware operation interfaces for both ENETC v1 and v4 PF
drivers.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ENETC PF driver of LS1028A (rev 1.0) is incompatible with the version
used on the i.MX95 platform (rev 4.1), except for the station interface
(SI) part. To reduce code redundancy and prepare for a new driver for rev
4.1 and later, extract shared interfaces from enetc_pf.c and move them to
enetc_pf_common.c. This refactoring lays the groundwork for compiling
enetc_pf_common.c into a shared driver for both platforms' PF drivers.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The netc-blk-ctrl driver is used to configure Integrated Endpoint
Register Block (IERB) and Privileged Register Block (PRB) of NETC.
For i.MX platforms, it is also used to configure the NETCMIX block.
The IERB contains registers that are used for pre-boot initialization,
debug, and non-customer configuration. The PRB controls global reset
and global error handling for NETC. The NETCMIX block is mainly used
to set MII protocol and PCS protocol of the links, it also contains
settings for some other functions.
Note the IERB configuration registers can only be written after being
unlocked by PRB, otherwise, all write operations are inhibited. A warm
reset is performed when the IERB is unlocked, and it results in an FLR
to all NETC devices. Therefore, all NETC device drivers must be probed
or initialized after the warm reset is finished.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the previous implementation, vf_state is allocated memory only when VF
is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before
VF is enabled to configure the MAC address of VF. If this is the case,
enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null
pointer. The simplified error log is as follows.
root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89
[ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy
[ 173.641973] lr : do_setlink+0x4a8/0xec8
[ 173.732292] Call trace:
[ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80
[ 173.738847] __rtnl_newlink+0x530/0x89c
[ 173.742692] rtnl_newlink+0x50/0x7c
[ 173.746189] rtnetlink_rcv_msg+0x128/0x390
[ 173.750298] netlink_rcv_skb+0x60/0x130
[ 173.754145] rtnetlink_rcv+0x18/0x24
[ 173.757731] netlink_unicast+0x318/0x380
[ 173.761665] netlink_sendmsg+0x17c/0x3c8
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241031060247.1290941-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net_dim() is currently passed a struct dim_sample argument by value.
struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64
passes it on the stack. All callers have already initialized dim_sample
on the stack, so passing it by value requires pushing a duplicated copy
to the stack. Either witing to the stack and immediately reading it, or
perhaps dereferencing addresses relative to the stack pointer in a chain
of push instructions, seems to perform quite poorly.
In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time,
94% of which is attributed to the first push instruction to copy
dim_sample on the stack for the call to net_dim():
// Call ktime_get()
0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47>
// Pass the address of struct dim in %rdi
|4ead7: lea 0x3d0(%rbx),%rdi
// Set dim_sample.pkt_ctr
|4eade: mov %r13d,0x8(%rsp)
// Set dim_sample.byte_ctr
|4eae3: mov %r12d,0xc(%rsp)
// Set dim_sample.event_ctr
0.15 |4eae8: mov %bp,0x10(%rsp)
// Duplicate dim_sample on the stack
94.16 |4eaed: push 0x10(%rsp)
2.79 |4eaf1: push 0x10(%rsp)
0.07 |4eaf5: push %rax
// Call net_dim()
0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b>
To allow the caller to reuse the struct dim_sample already on the stack,
pass the struct dim_sample by reference to net_dim().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sparse warns:
note: in included file (through ../include/trace/trace_events.h,
../include/trace/define_trace.h,
../drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h):
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] fd_status
got restricted __be32 const [usertype] status
We take struct qm_fd :: status, store it and print it as an u32,
though it is a big endian field. We should print the FD status in
CPU endianness for ease of debug and consistency between PowerPC and
Arm systems.
Though it is a not often used debug feature, it is best to treat it as
a bug and backport the format change to all supported stable kernels,
for consistency.
Fixes: eb11ddf36eb8 ("dpaa_eth: add trace points")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20241029163105.44135-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MAC address of VF can be configured through the mailbox mechanism of
ENETC, but the previous implementation forgot to set the MAC address in
net_device, resulting in the SMAC of the sent frames still being the old
MAC address. Since the MAC address in the hardware has been changed, Rx
cannot receive frames with the DMAC address as the new MAC address. The
most obvious phenomenon is that after changing the MAC address, we can
see that the MAC address of eno0vf0 has not changed through the "ifconfig
eno0vf0" command and the IP address cannot be obtained .
root@ls1028ardb:~# ifconfig eno0vf0 down
root@ls1028ardb:~# ifconfig eno0vf0 hw ether 00:04:9f:3a:4d:56 up
root@ls1028ardb:~# ifconfig eno0vf0
eno0vf0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 66:36:2c:3b:87:76 txqueuelen 1000 (Ethernet)
RX packets 794 bytes 69239 (69.2 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 11 bytes 2226 (2.2 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20241029090406.841836-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cell-index value is obtained from Device Tree and then used to calculate
the index for accessing arrays port_mfl[], mac_mfl[] and intr_mng[].
In case of broken DT due to any error cell-index can contain any value
and it is possible to go beyond the array boundaries which can lead
at least to memory corruption.
Validate cell-index value obtained from Device Tree.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://patch.msgid.link/20241028065824.15452-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Lee Trager <lee@trager.us>
Link: https://patch.msgid.link/20241025203757.288367-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts and no adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
