summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/faraday
AgeCommit message (Collapse)AuthorFilesLines
2024-10-10net: ftgmac100: fixed not check status from fixed phyJacky Chou1-1/+6
Add error handling from calling fixed_phy_register. It may return some error, therefore, need to check the status. And fixed_phy_register needs to bind a device node for mdio. Add the mac device node for fixed_phy_register function. This is a reference to this function, of_phy_register_fixed_link(). Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com> Link: https://patch.msgid.link/20241007032435.787892-1-jacky_chou@aspeedtech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: ftgmac100: Enable TX interrupt to avoid TX timeoutJacky Chou1-1/+1
Currently, the driver only enables RX interrupt to handle RX packets and TX resources. Sometimes there is not RX traffic, so the TX resource needs to wait for RX interrupt to free. This situation will toggle the TX timeout watchdog when the MAC TX ring has no more resources to transmit packets. Therefore, enable TX interrupt to release TX resources at any time. When I am verifying iperf3 over UDP, the network hangs. Like the log below. root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0 Connecting to host 192.168.100.100, port 5201 [ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201 [ ID] Interval Transfer Bandwidth Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%) [ 4] Sent 20 datagrams iperf3: error - the server has terminated The network topology is FTGMAC connects directly to a PC. UDP does not need to wait for ACK, unlike TCP. Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead of waiting for the RX interrupt. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com> Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+18
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/faraday/ftgmac100.c 4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible") e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") https://lore.kernel.org/0b851ec5-f91d-4dd3-99da-e81b98c9ed28@kernel.org net/ipv4/tcp.c bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort") edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset") https://lore.kernel.org/20240828112207.5c199d41@canb.auug.org.au No adjacent changes. Link: https://patch.msgid.link/20240829130829.39148-1-pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-29net: ftgmac100: Get link speed and duplex for NC-SIJacky Chou1-2/+26
The ethtool of this driver uses the phy API of ethtool to get the link information from PHY driver. Because the NC-SI is forced on 100Mbps and full duplex, the driver connect a fixed-link phy driver for NC-SI. The ethtool will get the link information from the fixed-link phy driver. Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240827030513.481469-1-jacky_chou@aspeedtech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-26net: ftgmac100: Ensure tx descriptor updates are visibleJacky Chou1-8/+18
The driver must ensure TX descriptor updates are visible before updating TX pointer and TX clear pointer. This resolves TX hangs observed on AST2600 when running iperf3. Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-08net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet1-1/+1
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-20net: ethernet: faraday: Convert to platform remove callback returning voidUwe Kleine-König2-6/+4
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11net: ftmac100: add multicast filtering possibilitySergei Antonov1-5/+45
If netdev_mc_count() is not zero and not IFF_ALLMULTI, filter incoming multicast packets. The chip has a Multicast Address Hash Table for allowed multicast addresses, so we fill it. Implement .ndo_set_rx_mode and recalculate multicast hash table. Also observe change of IFF_PROMISC and IFF_ALLMULTI netdev flags. Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-18net: ftgmac100: support getting MAC address from NVMEMPaul Fertser1-4/+12
Make use of of_get_ethdev_address() to support reading MAC address not only from the usual DT nodes but also from an NVMEM provider (e.g. using a dedicated area in an FRU EEPROM). Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20230713095743.30517-1-fercerpav@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-18net: ftmac100: handle netdev flags IFF_PROMISC and IFF_ALLMULTISergei Antonov1-0/+6
When netdev->flags has IFF_PROMISC or IFF_ALLMULTI, set the corresponding bits in the MAC Control Register (MACCR). This change is based on code from the ftgmac100 driver, see ftgmac100_start_hw() in ftgmac100.c Signed-off-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-01net: ftmac100: allow increasing MTU to make most use of single-segment buffersSergei Antonov1-2/+31
If the FTMAC100 is used as a DSA master, then it is expected that frames which are MTU sized on the wire facing the external switch port (1500 octets in L2 payload, plus L2 header) also get a DSA tag when seen by the host port. This extra tag increases the length of the packet as the host port sees it, and the FTMAC100 is not prepared to handle frames whose length exceeds 1518 octets (including FCS) at all. Only a minimal rework is needed to support this configuration. Since MTU-sized DSA-tagged frames still fit within a single buffer (RX_BUF_SIZE), we just need to optimize the resource management rather than implement multi buffer RX. In ndo_change_mtu(), we toggle the FTMAC100_MACCR_RX_FTL bit to tell the hardware to drop (or not) frames with an L2 payload length larger than 1500. We need to replicate the MACCR configuration in ftmac100_start_hw() as well, since there is a hardware reset there which clears previous settings. The advantage of dynamically changing FTMAC100_MACCR_RX_FTL is that when dev->mtu is at the default value of 1500, large frames are automatically dropped in hardware and we do not spend CPU cycles dropping them. Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20221028183220.155948-3-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-01net: ftmac100: report the correct maximum MTU of 1500Vladimir Oltean1-1/+2
The driver uses the MAX_PKT_SIZE (1518) for both MTU reporting and for TX. However, the 2 places do not measure the same thing. On TX, skb->len measures the entire L2 packet length (without FCS, which software does not possess). So the comparison against 1518 there is correct. What is not correct is the reporting of dev->max_mtu as 1518. Since MTU measures L2 *payload* length (excluding L2 overhead) and not total L2 packet length, it means that the correct max_mtu supported by this device is the standard 1500. Anything higher than that will be dropped on RX currently. To fix this, subtract VLAN_ETH_HLEN from MAX_PKT_SIZE when reporting the max_mtu, since that is the difference between L2 payload length and total L2 length as seen by software. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20221028183220.155948-2-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-01net: ftmac100: prepare data path for receiving single segment packets > 1514Vladimir Oltean1-17/+12
Eliminate one check in the data path and move it elsewhere, to where our real limitation is. We'll want to start processing "too long" frames in the driver (currently there is a hardware MAC setting which drops theses). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20221028183220.155948-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29net: drop the weight argument from netif_napi_addJakub Kicinski2-2/+2
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15net: ftgmac100: support fixed linkTao Ren1-0/+24
Support fixed link in ftgmac100 driver. Fixed link is used on several Meta OpenBMC platforms, such as Elbert (AST2620) and Wedge400 (AST2520). Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06net: ftmac100: fix endianness-related issues from 'sparse'Sergei Antonov1-6/+6
Sparse found a number of endianness-related issues of these kinds: .../ftmac100.c:192:32: warning: restricted __le32 degrades to integer .../ftmac100.c:208:23: warning: incorrect type in assignment (different base types) .../ftmac100.c:208:23: expected unsigned int rxdes0 .../ftmac100.c:208:23: got restricted __le32 [usertype] .../ftmac100.c:249:23: warning: invalid assignment: &= .../ftmac100.c:249:23: left side has type unsigned int .../ftmac100.c:249:23: right side has type restricted __le32 .../ftmac100.c:527:16: warning: cast to restricted __le32 Change type of some fields from 'unsigned int' to '__le32' to fix it. Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220902113749.1408562-1-saproj@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-01net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang2-4/+4
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-27net: ftmac100: add an opportunity to get ethaddr from the platformSergei Antonov1-0/+5
This driver always generated a random ethernet address. Leave it as a fallback solution, but add a call to platform_get_ethdev_address(). Handle EPROBE_DEFER returned from platform_get_ethdev_address() to retry when EEPROM is ready. Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220824151724.2698107-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24net: ftmac100: set max_mtu to allow DSA overhead settingSergei Antonov1-0/+1
In case ftmac100 is used with a DSA switch, Linux wants to set MTU to 1504 to accommodate for DSA overhead. With the default max_mtu it leads to the error message: ftmac100 92000000.mac eth0: error -22 setting MTU to 1504 to include DSA overhead ftmac100 supports packet length 1518 (MAX_PKT_SIZE constant), so it is safe to report it in max_mtu. Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220821160844.474277-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-13net: ftgmac100: Hold reference returned by of_get_child_by_name()Liang He1-1/+14
In ftgmac100_probe(), we should hold the refernece returned by of_get_child_by_name() and use it to call of_node_put() for reference balance. Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18net: ftgmac100: Disable hardware checksum on AST2600Joel Stanley1-0/+5
The AST2600 when using the i210 NIC over NC-SI has been observed to produce incorrect checksum results with specific MTU values. This was first observed when sending data across a long distance set of networks. On a local network, the following test was performed using a 1MB file of random data. On the receiver run this script: #!/bin/bash while [ 1 ]; do # Zero the stats nstat -r > /dev/null nc -l 9899 > test-file # Check for checksum errors TcpInCsumErrors=$(nstat | grep TcpInCsumErrors) if [ -z "$TcpInCsumErrors" ]; then echo No TcpInCsumErrors else echo TcpInCsumErrors = $TcpInCsumErrors fi done On an AST2600 system: # nc <IP of receiver host> 9899 < test-file The test was repeated with various MTU values: # ip link set mtu 1410 dev eth0 The observed results: 1500 - good 1434 - bad 1400 - good 1410 - bad 1420 - good The test was repeated after disabling tx checksumming: # ethtool -K eth0 tx-checksumming off And all MTU values tested resulted in transfers without error. An issue with the driver cannot be ruled out, however there has been no bug discovered so far. David has done the work to take the original bug report of slow data transfer between long distance connections and triaged it down to this test case. The vendor suspects this this is a hardware issue when using NC-SI. The fixes line refers to the patch that introduced AST2600 support. Reported-by: David Wilder <wilder@us.ibm.com> Reviewed-by: Dylan Hung <dylan_hung@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: ftgmac100: access hardware register after clock readyDylan Hung1-5/+5
AST2600 MAC register 0x58 is writable only when the MAC clock is enabled. Usually, the MAC clock is enabled by the bootloader so register 0x58 is set normally when the bootloader is involved. To make ast2600 ftgmac100 work without the bootloader, postpone the register write until the clock is ready. Fixes: 137d23cea1c0 ("net: ftgmac100: Fix Aspeed ast2600 TX hang issue") Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-24Merge tag 'asm-generic-5.18' of ↵Linus Torvalds1-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three sets of updates for 5.18 in the asm-generic tree: - The set_fs()/get_fs() infrastructure gets removed for good. This was already gone from all major architectures, but now we can finally remove it everywhere, which loses some particularly tricky and error-prone code. There is a small merge conflict against a parisc cleanup, the solution is to use their new version. - The nds32 architecture ends its tenure in the Linux kernel. The hardware is still used and the code is in reasonable shape, but the mainline port is not actively maintained any more, as all remaining users are thought to run vendor kernels that would never be updated to a future release. - A series from Masahiro Yamada cleans up some of the uapi header files to pass the compile-time checks" * tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits) nds32: Remove the architecture uaccess: remove CONFIG_SET_FS ia64: remove CONFIG_SET_FS support sh: remove CONFIG_SET_FS support sparc64: remove CONFIG_SET_FS support lib/test_lockup: fix kernel pointer check for separate address spaces uaccess: generalize access_ok() uaccess: fix type mismatch warnings from access_ok() arm64: simplify access_ok() m68k: fix access_ok for coldfire MIPS: use simpler access_ok() MIPS: Handle address errors for accesses above CPU max virtual user address uaccess: add generic __{get,put}_kernel_nofault nios2: drop access_ok() check from __put_user() x86: use more conventional access_ok() definition x86: remove __range_not_ok() sparc64: add __{get,put}_kernel_nofault() nds32: fix access_ok() checks in get/put_user uaccess: fix nios2 and microblaze get_user_8() sparc64: fix building assembly files ...
2022-03-07nds32: Remove the architectureAlan Kao1-7/+5
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit RISC target designed by Andes Technologies. Support was added to the kernel in 2016 as the replacement RISC-V based V5 processors were already announced, and maintained by (current or former) Andes employees. As explained by Alan Kao, new customers are now all using RISC-V, and all known nds32 users are already on longterm stable kernels provided by Andes, with no development work going into mainline support any more. While the port is still in a reasonably good shape, it only gets worse over time without active maintainers, so it seems best to remove it before it becomes unusable. As always, if it turns out that there are mainline users after all, and they volunteer to maintain the port in the future, the removal can be reverted. Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/ Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/ Link: https://www.andestech.com/en/products-solutions/andestar-architecture/ Signed-off-by: Alan Kao <alankao@andestech.com> [arnd: rewrite changelog to provide more background] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-23drivers/net/ftgmac100: fix DHCP potential failure with systemdHeyi Guo1-2/+11
DHCP failures were observed with systemd 247.6. The issue could be reproduced by rebooting Aspeed 2600 and then running ifconfig ethX down/up. It is caused by below procedures in the driver: 1. ftgmac100_open() enables net interface and call phy_start() 2. When PHY is link up, it calls netif_carrier_on() and then adjust_link callback 3. ftgmac100_adjust_link() will schedule the reset task 4. ftgmac100_reset_task() will then reset the MAC in another schedule After step 2, systemd will be notified to send DHCP discover packet, while the packet might be corrupted by MAC reset operation in step 4. Call ftgmac100_reset() directly instead of scheduling task to fix the issue. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drivers/net/ftgmac100: adjust code place for function call dependencyHeyi Guo1-111/+111
This is to prepare for ftgmac100_adjust_link() to call ftgmac100_reset() directly. Only code places are changed. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drivers/net/ftgmac100: refactor ftgmac100_reset_task to enable direct ↵Heyi Guo1-3/+9
function call This is to prepare for ftgmac100_adjust_link() to call reset function directly, instead of task schedule. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-4/+10
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07ethernet: make more use of device_get_ethdev_address()Jakub Kicinski1-3/+2
Convert a few drivers to device_get_ethdev_address(), saving a few LoC. The check if addr is valid in netsec is superfluous, device_get_ethdev_addr() already checks that (in fwnode_get_mac_addr()). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: remove the addr len from mac helpersJakub Kicinski1-1/+1
All callers pass in ETH_ALEN and the function itself will return -EINVAL for any other address length. Just assume it's ETH_ALEN like all other mac address helpers (nvm, of, platform). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: change the return type of mac address helpersJakub Kicinski1-3/+1
fwnode_get_mac_address() and device_get_mac_address() return a pointer to the buffer that was passed to them on success or NULL on failure. None of the callers care about the actual value, only if it's NULL or not. These semantics differ from of_get_mac_address() which returns an int so to avoid confusion make the device helpers return an errno. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski1-2/+2
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann2-2/+2
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: ftgmac100: add missing error return code in ftgmac100_probe()Yang Yingliang1-1/+5
The variables will be free on path err_phy_connect, it should return error code, or it will cause double free when calling ftgmac100_remove(). Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode") Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Simplify the code by using module_platform_driver macroZhichao Cai1-12/+1
for ftmac100 Signed-off-by: Zhichao Cai <caizhichao@yulong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-13ftgmac100: Restart MAC HW onceDylan Hung1-0/+1
The interrupt handler may set the flag to reset the mac in the future, but that flag is not cleared once the reset has occurred. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05ethernet: select CONFIG_CRC32 as neededArnd Bergmann1-0/+1
A number of ethernet drivers require crc32 functionality to be avaialable in the kernel, causing a link error otherwise: arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast': et131x.c:(.text+0x5918): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit': macb_main.c:(.text+0x4b88): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode': ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list': fec_main.c:(.text+0x6120): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address': fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read': nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire': nfp_resource.c:(.text+0x144): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list': lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do': rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del': rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb': arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index': dr_ste.c:(.text+0x354): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast': lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le' Add the missing 'select CRC32' entries in Kconfig for each of them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Acked-by: Mark Einon <mark.einon@gmail.com> Acked-by: Simon Horman <simon.horman@netronome.com> Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: ftgmac100: Fix crash when removing driverJoel Stanley1-0/+4
When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific)) in net/core/dev.c due to still having the NC-SI packet handler registered. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind ------------[ cut here ]------------ kernel BUG at net/core/dev.c:10254! Internal error: Oops - BUG: 0 [#1] SMP ARM CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46 Hardware name: Generic DT based system PC is at netdev_run_todo+0x314/0x394 LR is at cpumask_next+0x20/0x24 pc : [<806f5830>] lr : [<80863cb0>] psr: 80000153 sp : 855bbd58 ip : 00000001 fp : 855bbdac r10: 80c03d00 r9 : 80c06228 r8 : 81158c54 r7 : 00000000 r6 : 80c05dec r5 : 80c05d18 r4 : 813b9280 r3 : 813b9054 r2 : 8122c470 r1 : 00000002 r0 : 00000002 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85514008 DAC: 00000051 Process sh (pid: 115, stack limit = 0x7cb5703d) ... Backtrace: [<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c) r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410 r4:813b9000 [<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30) [<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8) r5:8115b410 r4:813b9000 [<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c) Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode") Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201117024448.1170761-1-joel@jms.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500Ivan Mikhaylov1-2/+18
phy-handle can't be handled well for ast2400/2500 which has an embedded MDIO controller. Add ftgmac100_mdio_setup for ast2400/2500 and initialize PHYs from mdio child node with of_mdiobus_register. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03net: ftgmac100: move phy connect out from ftgmac100_setup_mdioIvan Mikhaylov1-50/+54
Split MDIO registration and PHY connect into ftgmac100_setup_mdio and ftgmac100_mii_probe. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-17net: ftgmac100: Fix Aspeed ast2600 TX hang issueDylan Hung2-0/+13
The new HW arbitration feature on Aspeed ast2600 will cause MAC TX to hang when handling scatter-gather DMA. Disable the problematic feature by setting MAC register 0x58 bit28 and bit27. Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property") Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-3/+3
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-30net/faraday: Fix unnecessary check in ftmac100_probe()Tang Bin1-3/+0
The function ftmac100_probe() is only called with an openfirmware platform device. Therefore there is no need to check that the passed in device is NULL. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-01net/faraday: fix grammar in function ftgmac100_setup_clk() in ftgmac100.cHu Haowen1-1/+1
"its not" is wrong. The words should be "it's not". Signed-off-by: Hu Haowen <xianfengting221@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11ftgmac100: Remove redundant judgementtangbin1-3/+0
In this function, ftgmac100_probe() can be triggered only if the platform_device and platform_driver matches, so the judgement at the beginning is redundant. Signed-off-by: tangbin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/faraday: Delete driver version from the driversLeon Romanovsky2-5/+0
Use general linux kernel version instead of static driver version. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-05 16:39:48 +0300