summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2025-09-23bnxt_en: correct offset handling for IPv6 destination addressAlok Tiwari1-1/+1
In bnxt_tc_parse_pedit(), the code incorrectly writes IPv6 destination values to the source address field (saddr) when processing pedit offsets within the destination address range. This patch corrects the assignment to use daddr instead of saddr, ensuring that pedit operations on IPv6 destination addresses are applied correctly. Fixes: 9b9eb518e338 ("bnxt_en: Add support for NAT(L3/L4 rewrite)") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250920121157.351921-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-18cnic: Fix use-after-free bugs in cnic_delete_taskDuoming Zhou1-2/+1
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(), which does not guarantee that the delayed work item 'delete_task' has fully completed if it was already running. Additionally, the delayed work item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after the cyclic work items have finished executing, a delayed work item may still exist in the workqueue. This leads to use-after-free scenarios where the cnic_dev is deallocated by cnic_free_dev(), while delete_task remains active and attempt to dereference cnic_dev in cnic_delete_task(). A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) cnic_netdev_event() | cnic_stop_hw() | cnic_delete_task() cnic_cm_stop_bnx2x_hw() | ... cancel_delayed_work() | /* the queue_delayed_work() flush_workqueue() | executes after flush_workqueue()*/ | queue_delayed_work() cnic_free_dev(dev)//free | cnic_delete_task() //new instance | dev = cp->dev; //use Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the cyclic delayed work item is properly canceled and that any ongoing execution of the work item completes before the cnic_dev is deallocated. Furthermore, since cancel_delayed_work_sync() uses __flush_work(work, true) to synchronously wait for any currently executing instance of the work item to finish, the flush_workqueue() becomes redundant and should be removed. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated the cnic PCI device in QEMU and introduced intentional delays — such as inserting calls to ssleep() within the cnic_delete_task() function — to increase the likelihood of triggering the bug. Fixes: fdf24086f475 ("cnic: Defer iscsi connection cleanup") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-01bnxt_en: fix incorrect page count in RX aggr ring logAlok Tiwari1-1/+1
The warning in bnxt_alloc_one_rx_ring_netmem() reports the number of pages allocated for the RX aggregation ring. However, it mistakenly used bp->rx_ring_size instead of bp->rx_agg_ring_size, leading to confusing or misleading log output. Use the correct bp->rx_agg_ring_size value to fix this. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250830062331.783783-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-27bnxt_en: Fix stats context reservation logicMichael Chan1-1/+2
The HW resource reservation logic allows the L2 driver to use the RoCE resources if the RoCE driver is not registered. When calculating the stats contexts available for L2, we should not blindly subtract the stats contexts reserved for RoCE unless the RoCE driver is registered. This bug may cause the L2 rings to be less than the number requested when we are close to running out of stats contexts. Fixes: 2e4592dc9bee ("bnxt_en: Change MSIX/NQs allocation policy") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250825175927.459987-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-27bnxt_en: Adjust TX rings if reservation is less than requestedMichael Chan1-0/+12
Before we accept an ethtool request to increase a resource (such as rings), we call the FW to check that the requested resource is likely available first before we commit. But it is still possible that the actual reservation or allocation can fail. The existing code is missing the logic to adjust the TX rings in case the reserved TX rings are less than requested. Add a warning message (a similar message for RX rings already exists) and add the logic to adjust the TX rings. Without this fix, the number of TX rings reported to the stack can exceed the actual TX rings and ethtool -l will report more than the actual TX rings. Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250825175927.459987-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-27bnxt_en: Fix memory corruption when FW resources change during ifdownSreekanth Reddy1-5/+16
bnxt_set_dflt_rings() assumes that it is always called before any TC has been created. So it doesn't take bp->num_tc into account and assumes that it is always 0 or 1. In the FW resource or capability change scenario, the FW will return flags in bnxt_hwrm_if_change() that will cause the driver to reinitialize and call bnxt_cancel_reservations(). This will lead to bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc may be greater than 1. This will cause bp->tx_ring[] to be sized too small and cause memory corruption in bnxt_alloc_cp_rings(). Fix it by properly scaling the TX rings by bp->num_tc in the code paths mentioned above. Add 2 helper functions to determine bp->tx_nr_rings and bp->tx_nr_rings_per_tc. Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250825175927.459987-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19bnxt_en: Fix lockdep warning during rmmodMichael Chan1-1/+1
The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-14bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZEDavid Wei1-3/+9
The data page pool always fills the HW rx ring with pages. On arm64 with 64K pages, this will waste _at least_ 32K of memory per entry in the rx ring. Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This makes the data page pool the same as the header pool. Tested with iperf3 with a small (64 entries) rx ring to encourage buffer circulation. Fixes: cd1fafe7da1f ("eth: bnxt: add support rx side device memory TCP") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-08net: page_pool: allow enabling recycling late, fix false positive warningJakub Kicinski1-1/+8
Page pool can have pages "directly" (locklessly) recycled to it, if the NAPI that owns the page pool is scheduled to run on the same CPU. To make this safe we check that the NAPI is disabled while we destroy the page pool. In most cases NAPI and page pool lifetimes are tied together so this happens naturally. The queue API expects the following order of calls: -> mem_alloc alloc new pp -> stop napi_disable -> start napi_enable -> mem_free free old pp Here we allocate the page pool in ->mem_alloc and free in ->mem_free. But the NAPIs are only stopped between ->stop and ->start. We created page_pool_disable_direct_recycling() to safely shut down the recycling in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't have to worry about recycling any more. Unfortunately, the page_pool_disable_direct_recycling() is not enough to deal with failures which necessitate freeing the _new_ page pool. If we hit a failure in ->mem_alloc or ->stop the new page pool has to be freed while the NAPI is active (assuming driver attaches the page pool to an existing NAPI instance and doesn't reallocate NAPIs). Freeing the new page pool is technically safe because it hasn't been used for any packets, yet, so there can be no recycling. But the check in napi_assert_will_not_race() has no way of knowing that. We could check if page pool is empty but that'd make the check much less likely to trigger during development. Add page_pool_enable_direct_recycling(), pairing with page_pool_disable_direct_recycling(). It will allow us to create the new page pools in "disabled" state and only enable recycling when we know the reconfig operation will not fail. Coincidentally it will also let us re-enable the recycling for the old pool, if the reconfig failed: -> mem_alloc (new) -> stop (old) # disables direct recycling for old -> start (new) # fail!! -> start (old) # go back to old pp but direct recycling is lost :( -> mem_free (new) The new helper is idempotent to make the life easier for drivers, which can operate in HDS mode and support zero-copy Rx. The driver can call the helper twice whether there are two pools or it has multiple references to a single pool. Fixes: 40eca00ae605 ("bnxt_en: unlink page pool when stopping Rx queue") Tested-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-30Merge tag 'net-next-6.17' of ↵Linus Torvalds49-11041/+4254
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
2025-07-30Merge tag 'timers-cleanups-2025-07-27' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide cleanup of struct cycle_counter const annotations. The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const" * tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/timecounter: Fix the lie that struct cyclecounter is const
2025-07-25net: Fix typosBjorn Helgaas9-10/+10
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
Cross-merge networking fixes after downstream PR (net-6.16-rc8). Conflicts: drivers/net/ethernet/microsoft/mana/gdma_main.c 9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion") 755391121038 ("net: mana: Allocate MSI-X vectors dynamically") https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au Adjacent changes: drivers/net/ethernet/ti/icssg/icssg_prueth.h 6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG") ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22net: bcmasp: Restore programming of TX map vector registerFlorian Fainelli1-0/+3
On ASP versions v2.x we need to program the TX map vector register to properly exercise end-to-end flow control, otherwise the TX engine can either lock-up, or cause the hardware calculated checksum to be wrong/corrupted when multiple back to back packets are being submitted for transmission. This register defaults to 0, which means no flow control being applied. Fixes: e9f31435ee7d ("net: bcmasp: Add support for asp-v3.0") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250718212242.3447751-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: bcmasp: Add support for re-starting auto-negotiationFlorian Fainelli1-0/+1
Wire-up ethtool_ops::nway_reset to phy_ethtool_nway_reset in order to support re-starting auto-negotiation. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250717180915.2611890-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-16bnxt: move bnxt_hsi.h to include/linux/bnxt/hsi.hAndy Gospodarek23-10936/+22
This moves bnxt_hsi.h contents to a common location so it can be properly referenced by bnxt_en, bnxt_re, and bnge. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250714170202.39688-1-gospo@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-8/+14
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2). No conflicts. Adjacent changes: drivers/net/wireless/mediatek/mt76/mt7925/mcu.c c701574c5412 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan") b3a431fe2e39 ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()") drivers/net/wireless/mediatek/mt76/mt7996/mac.c 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()") dc66a129adf1 ("wifi: mt76: add a wrapper for wcid access with validation") drivers/net/wireless/mediatek/mt76/mt7996/main.c 3dd6f67c669c ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()") 8989d8e90f5f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()") net/mac80211/cfg.c 58fcb1b4287c ("wifi: mac80211: reject VHT opmode for unsupported channel widths") 037dc18ac3fb ("wifi: mac80211: add support for storing station S1G capabilities") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11bnxt_en: Set DMA unmap len correctly for XDP_REDIRECTSomnath Kotur1-1/+1
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11bnxt_en: Flush FW trace before copying to the coredumpShruti Parab1-7/+11
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush() to flush the FW trace buffer. This needs to be done before we call bnxt_copy_ctx_mem() to copy the trace data. Without this fix, the coredump may not contain all the FW traces. Fixes: 3c2179e66355 ("bnxt_en: Add FW trace coredump segments to the coredump") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11bnxt_en: Fix DCB ETS validationShravya KN1-0/+2
In bnxt_ets_validate(), the code incorrectly loops over all possible traffic classes to check and add the ETS settings. Fix it to loop over the configured traffic classes only. The unconfigured traffic classes will default to TSA_ETS with 0 bandwidth. Looping over these unconfigured traffic classes may cause the validation to fail and trigger this error message: "rejecting ETS config starving a TC\n" The .ieee_setets() will then fail. Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-6/+10
Cross-merge networking fixes after downstream PR (net-6.16-rc6). No conflicts. Adjacent changes: Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml 0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible") b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Add a network deviceVikas Gupta8-1/+543
Add a network device with netdev features enabled. Some features are enabled based on the capabilities advertised by the firmware. Add the skeleton of minimal netdev operations. Additionally, initialize the parameters for rings (TX/RX/Completion). Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-11-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Initialize default configurationVikas Gupta6-0/+403
Query resources from the firmware and, based on the availability of resources, initialize the default settings. The default settings include: 1. Rings and other resource reservations with the firmware. This ensures that resources are reserved before network and auxiliary devices are created. 2. Mapping the BAR, which helps access doorbells since its size is known after querying the firmware. 3. Retrieving the TCs and hardware CoS queue mappings. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-10-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Add irq allocation supportVikas Gupta3-0/+85
Add irq allocation functions. This will help to allocate IRQs to both netdev and RoCE aux devices. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-9-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Add resource management supportVikas Gupta8-2/+761
Get the resources and capabilities from the firmware. Add functions to manage the resources with the firmware. These functions will help netdev reserve the resources with the firmware before registering the device in future patches. The resources and their information, such as the maximum available and reserved, are part of the members present in the bnge_hw_resc struct. The bnge_reserve_rings() function also populates the RSS table entries once the RX rings are reserved with the firmware. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-8-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Add backing store supportVikas Gupta5-0/+680
Backing store or context memory on the host helps the device to manage rings, stats and other resources. Context memory is allocated with the help of ring alloc/free functions. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-7-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Add ring memory allocation supportVikas Gupta3-1/+138
Add ring allocation/free mechanism which help to allocate rings (TX/RX/Completion) and backing stores memory on the host for the device. Future patches will use these functions. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-6-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Add initial interaction with firmwareVikas Gupta7-1/+522
Query firmware with the help of basic firmware commands and cache the capabilities. With the help of basic commands start the initialization process of the driver with the firmware. Since basic information is available from the firmware, register with devlink. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-5-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Add firmware communication mechanismVikas Gupta4-1/+634
Add support to communicate with the firmware. Future patches will use these functions to send the messages to the firmware. Functions support allocating request/response buffers to send a particular command. Each command has certain timeout value to which the driver waits for response from the firmware. In error case, commands may be either timed out waiting on response from the firmware or may return a specific error code. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-4-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Add devlink interfaceVikas Gupta6-1/+211
Allocate a base device and devlink interface with minimal devlink ops. Add dsn and board related information. Map PCIe BAR (bar0), which helps to communicate with the firmware. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-3-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08bng_en: Add PCI interfaceVikas Gupta5-0/+171
Add basic pci interface to the driver which supports the BCM5770X NIC family. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Link: https://patch.msgid.link/20250701143511.280702-2-vikas.gupta@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08net: bcmgenet: Initialize u64 stats seq counterRyo Takakura1-0/+6
Initialize u64 stats as it uses seq counter on 32bit machines as suggested by lockdep below. [ 1.830953][ T1] INFO: trying to register non-static key. [ 1.830993][ T1] The code is fine but needs lockdep annotation, or maybe [ 1.831027][ T1] you didn't initialize this object before use? [ 1.831057][ T1] turning off the locking correctness validator. [ 1.831090][ T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc2-v7l+ #1 PREEMPT [ 1.831097][ T1] Tainted: [W]=WARN [ 1.831099][ T1] Hardware name: BCM2711 [ 1.831101][ T1] Call trace: [ 1.831104][ T1] unwind_backtrace from show_stack+0x18/0x1c [ 1.831120][ T1] show_stack from dump_stack_lvl+0x8c/0xcc [ 1.831129][ T1] dump_stack_lvl from register_lock_class+0x9e8/0x9fc [ 1.831141][ T1] register_lock_class from __lock_acquire+0x420/0x22c0 [ 1.831154][ T1] __lock_acquire from lock_acquire+0x130/0x3f8 [ 1.831166][ T1] lock_acquire from bcmgenet_get_stats64+0x4a4/0x4c8 [ 1.831176][ T1] bcmgenet_get_stats64 from dev_get_stats+0x4c/0x408 [ 1.831184][ T1] dev_get_stats from rtnl_fill_stats+0x38/0x120 [ 1.831193][ T1] rtnl_fill_stats from rtnl_fill_ifinfo+0x7f8/0x1890 [ 1.831203][ T1] rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xd0/0x138 [ 1.831214][ T1] rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x48/0x8c [ 1.831225][ T1] rtmsg_ifinfo from register_netdevice+0x8c0/0x95c [ 1.831237][ T1] register_netdevice from register_netdev+0x28/0x40 [ 1.831247][ T1] register_netdev from bcmgenet_probe+0x690/0x6bc [ 1.831255][ T1] bcmgenet_probe from platform_probe+0x64/0xbc [ 1.831263][ T1] platform_probe from really_probe+0xd0/0x2d4 [ 1.831269][ T1] really_probe from __driver_probe_device+0x90/0x1a4 [ 1.831273][ T1] __driver_probe_device from driver_probe_device+0x38/0x11c [ 1.831278][ T1] driver_probe_device from __driver_attach+0x9c/0x18c [ 1.831282][ T1] __driver_attach from bus_for_each_dev+0x84/0xd4 [ 1.831291][ T1] bus_for_each_dev from bus_add_driver+0xd4/0x1f4 [ 1.831303][ T1] bus_add_driver from driver_register+0x88/0x120 [ 1.831312][ T1] driver_register from do_one_initcall+0x78/0x360 [ 1.831320][ T1] do_one_initcall from kernel_init_freeable+0x2bc/0x314 [ 1.831331][ T1] kernel_init_freeable from kernel_init+0x1c/0x144 [ 1.831339][ T1] kernel_init from ret_from_fork+0x14/0x20 [ 1.831344][ T1] Exception stack(0xf082dfb0 to 0xf082dff8) [ 1.831349][ T1] dfa0: 00000000 00000000 00000000 00000000 [ 1.831353][ T1] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.831356][ T1] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 Fixes: 59aa6e3072aa ("net: bcmgenet: switch to use 64bit statistics") Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250702092417.46486-1-ryotkkr98@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-04bnxt_en: eliminate the compile warning in bnxt_request_irq due to ↵Jason Xing1-6/+4
CONFIG_RFS_ACCEL I received a kernel-test-bot report[1] that shows the [-Wunused-but-set-variable] warning. Since the previous commit I made, as the 'Fixes' tag shows, gives users an option to turn on and off the CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with GCC specifically. Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer bugs. [1] All warnings (new ones prefixed by >>): drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq': >> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable] 10703 | int i, j, rc = 0; | ^ Fixes: 9b6a30febddf ("net: allow rps/rfs related configs to be switched") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/ Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-01time/timecounter: Fix the lie that struct cyclecounter is constGreg Kroah-Hartman2-2/+2
In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
2025-06-28eth: bnxt: take page size into account for page pool recycling ringsJakub Kicinski1-3/+5
The Rx rings are filled with Rx buffers. Which are supposed to fit packet headers (or MTU if HW-GRO is disabled). The aggregation buffers are filled with "device pages". Adjust the sizes of the page pool recycling ring appropriately, based on ratio of the size of the buffer on given ring vs system page size. Otherwise on a system with 64kB pages we end up with >700MB of memory sitting in every single page pool cache. Correct the size calculation for the head_pool. Since the buffers there are always small I'm pretty sure I meant to cap the size at 1k, rather than make it the lowest possible size. With 64k pages 1k cache with a 1k ring is 64x larger than we need. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250626165441.4125047-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27tg3: spelling correctionsSimon Horman2-3/+3
Correct spelling as flagged by codespell. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+4
Cross-merge networking fixes after downstream PR (net-6.16-rc4). Conflicts: Documentation/netlink/specs/mptcp_pm.yaml 9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names") ec362192aa9e ("netlink: specs: fix up indentation errors") https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au Adjacent changes: Documentation/netlink/specs/fou.yaml 791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names") 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-25bnxt: properly flush XDP redirect listsYan Zhai1-1/+4
We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456] cpu_startup_entry+0x29/0x30 [56252.173248] start_secondary+0xf7/0x100 [56252.179941] common_startup_64+0x13e/0x141 [56252.186886] </TASK> From the crash dump, we found that the cpu_map_flush_list inside redirect info is partially corrupted: its list_head->next points to itself, but list_head->prev points to a valid list of unflushed bq entries. This turned out to be a result of missed XDP flush on redirect lists. By digging in the actual source code, we found that commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX ring structures") incorrectly overwrites the event mask for XDP_REDIRECT in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX and XDP_REDIRECT randomly for incoming packets in a naive XDP program. Properly propagate the XDP_REDIRECT events back fixes the crash. Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-21eth: bnxt: add netmem TX supportTaehee Yoo1-16/+24
Use netmem_dma_*() helpers and declare netmem_tx to support netmem TX. By this change, all bnxt devices will support the netmem TX. Unreadable skbs are not going to be handled by the TX push logic. So, it checks whether a skb is readable or not before the TX push logic. netmem TX can be tested with ncdevmem.c Acked-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250619144058.147051-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-27/+84
Cross-merge networking fixes after downstream PR (net-6.16-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Revert "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"Stanislav Fomichev1-29/+7
This reverts commit 325eb217e41fa14f307c7cc702bd18d0bb38fe84. udp_tunnel infra doesn't need RTNL, should be safe to get back to only netdev instance lock. Cc: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com> Link: https://patch.msgid.link/20250616162117.287806-7-stfomichev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19udp_tunnel: remove rtnl_lock dependencyStanislav Fomichev2-6/+3
Drivers that are using ops lock and don't depend on RTNL lock still need to manage it because udp_tunnel's RTNL dependency. Introduce new udp_tunnel_nic_lock and use it instead of rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to grab udp_tunnel_nic_lock mutex and might sleep). Cover more places in v4: - netlink - udp_tunnel_notify_add_rx_port (ndo_open) - triggers udp_tunnel_nic_device_sync_work - udp_tunnel_notify_del_rx_port (ndo_stop) - triggers udp_tunnel_nic_device_sync_work - udp_tunnel_get_rx_info (__netdev_update_features) - triggers NETDEV_UDP_TUNNEL_PUSH_INFO - udp_tunnel_drop_rx_info (__netdev_update_features) - triggers NETDEV_UDP_TUNNEL_DROP_INFO - udp_tunnel_nic_reset_ntf (ndo_open) - notifiers - udp_tunnel_nic_netdevice_event, depending on the event: - triggers NETDEV_UDP_TUNNEL_PUSH_INFO - triggers NETDEV_UDP_TUNNEL_DROP_INFO - ethnl_tunnel_info_reply_size - udp_tunnel_nic_set_port_priv (two intel drivers) Cc: Michael Chan <michael.chan@broadcom.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com> Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18eth: bnxt: migrate to new RXFH callbacksJakub Kicinski1-11/+13
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250617014555.434790-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18eth: bnx2x: migrate to new RXFH callbacksJakub Kicinski1-20/+13
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). The driver has no other RXNFC functionality so the SET callback can be now removed. Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/20250617014555.434790-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: bcmgenet: update PHY power downDoug Berger1-1/+6
The disable sequence in bcmgenet_phy_power_set() is updated to match the inverse sequence and timing (and spacing) of the enable sequence. This ensures that LEDs driven by the GENET IP are disabled when the GPHY is powered down. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250614025817.3808354-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18bnxt_en: Improve comment wording and error return codeAlok Tiwari3-5/+5
Improved wording and grammar in several comments for clarity. "the must belongs" -> "it must belong" "mininum" -> "minimum" "fileds" -> "fields" Replaced return -1 with -EINVAL in hwrm_ring_alloc_send_msg() to return a proper error code. These changes enhance code readability and consistent error handling. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250615154051.1365631-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18bnxt_en: Update MRU and RSS table of RSS contexts on queue resetPavan Chebbi1-5/+51
The commit under the Fixes tag below which updates the VNICs' RSS and MRU during .ndo_queue_start(), needs to be extended to cover any non-default RSS contexts which have their own VNICs. Without this step, packets that are destined to a non-default RSS context may be dropped after .ndo_queue_start(). We further optimize this scheme by updating the VNIC only if the RX ring being restarted is in the RSS table of the VNIC. Updating the VNIC (in particular setting the MRU to 0) will momentarily stop all traffic to all rings in the RSS table. Any VNIC that has the RX ring excluded from the RSS table can skip this step and avoid the traffic disruption. Note that this scheme is just an improvement. A VNIC with multiple rings in the RSS table will still see traffic disruptions to all rings in the RSS table when one of the rings is being restarted. We are working on a FW scheme that will improve upon this further. Fixes: 5ac066b7b062 ("bnxt_en: Fix queue start to update vnic RSS table") Reported-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18bnxt_en: Add a helper function to configure MRU and RSSPavan Chebbi1-11/+26
Add a new helper function that will configure MRU and RSS table of a VNIC. This will be useful when we configure both on a VNIC when resetting an RX ring. This function will be used again in the next bug fix patch where we have to reconfigure VNICs for RSS contexts. Suggested-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()Kalesh AP1-14/+10
Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set. Fixes: 3c163f35bd50 ("bnxt_en: Optimize recovery path ULP locking in the driver") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Co-developed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250613231841.377988-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-13net: bcmasp: enable GRO software interrupt coalescing by defaultFlorian Fainelli1-0/+2
Utilize netdev_sw_irq_coalesce_default_on() to provide conservative default settings for GRO software interrupt coalescing. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250611212730.252342-3-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 14:24:35 +0300