summaryrefslogtreecommitdiff
path: root/drivers/hwmon/peci
AgeCommit message (Collapse)AuthorFilesLines
2024-06-17peci, hwmon: Switch to new Intel CPU model definesTony Luck1-4/+4
Update peci subsystem to use the same vendor-family-model combined definition that core x86 code uses. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20240529171920.62571-1-tony.luck@intel.com Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
2023-12-11hwmon: (peci/dimmtemp) Bump timeoutPatrick Rudolph1-1/+1
The PECI CPU sensors are available as soon as the CPU is powered, however the PECI DIMM sensors are available after DRAM has been trained and thresholds have been written by host firmware. The default timeout of 30 seconds isn't enough for modern multisocket platforms utilizing DDR5 memory to bring up the memory and enable PECI sensor data. Bump the default timeout to 10 minutes in case the system starts without cached DDR5 training data. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20231130090422.2535542-1-patrick.rudolph@9elements.com [groeck: List affected driver in patch subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-09-01Merge tag 'char-misc-6.6-rc1' of ↵Linus Torvalds2-0/+68
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits) nvmem: core: Notify when a new layout is registered nvmem: core: Do not open-code existing functions nvmem: core: Return NULL when no nvmem layout is found nvmem: core: Create all cells before adding the nvmem device nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper nvmem: sec-qfprom: Add Qualcomm secure QFPROM support dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom dt-bindings: nvmem: Add compatible for QCM2290 nvmem: Kconfig: Fix typo "drive" -> "driver" nvmem: Explicitly include correct DT includes nvmem: add new NXP QorIQ eFuse driver dt-bindings: nvmem: Add t1023-sfp efuse support dt-bindings: nvmem: qfprom: Add compatible for MSM8226 nvmem: uniphier: Use devm_platform_get_and_ioremap_resource() nvmem: qfprom: do some cleanup nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource() nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource() nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource() nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource() nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource() ...
2023-08-21hwmon: (dimmtemp) Support more than 32 DIMMsPatrick Rudolph1-11/+15
This patch introduces support for handling more than 32 DIMMs by utilizing bitmap operations. The changes ensure that the driver can handle a higher number of DIMMs efficiently. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20230711152144.755177-1-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-08-07hwmon: (peci/dimmtemp) Add Sapphire Rapids supportPatrick Rudolph1-0/+50
Extend the functionality of hwmon (peci/dimmtemp) for Sapphire Rapids platform. Add the corresponding Sapphire Rapids ID and threshold code. The patch has been tested on a 4S system with 64 DIMMs installed. Verified read of DIMM temperature thresholds & temperature. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20230725104354.33920-3-Naresh.Solanki@9elements.com
2023-08-07hwmon: (peci/cputemp) Add Intel Sapphire Rapids supportPatrick Rudolph1-0/+18
Add support to read DTS for reading Intel Sapphire Rapids platform. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20230725104354.33920-2-Naresh.Solanki@9elements.com
2023-04-19hwmon: peci: constify pointers to hwmon_channel_infoKrzysztof Kozlowski2-2/+2
Statically allocated array of pointed to hwmon_channel_info can be made const for safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-03-21hwmon: (peci/cputemp) Fix miscalculated DTS for SKXIwona Winiarska1-1/+7
For Skylake, DTS temperature of the CPU is reported in S10.6 format instead of S8.8. Reported-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/lkml/ZBhHS7v+98NK56is@home.paul.comp/ Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20230321090410.866766-1-iwona.winiarska@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-03hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocationZev Weiss1-1/+1
The find_last_bit() call produces the index of the highest-numbered core in core_mask; because cores are numbered from zero, the number of elements we need to allocate is one more than that. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: stable@kernel.org # v5.18 Fixes: bf3608f338e9 ("hwmon: peci: Add cputemp driver") Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20230202021825.21486-1-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (dimmtemp) Fix bitmap handlingGuenter Roeck1-3/+3
Building arm:allmodconfig may fail with the following error. In function 'fortify_memcpy_chk', inlined from 'bitmap_copy' at include/linux/bitmap.h:261:2, inlined from 'bitmap_copy_clear_tail' at include/linux/bitmap.h:270:2, inlined from 'bitmap_from_u64' at include/linux/bitmap.h:622:2, inlined from 'check_populated_dimms' at drivers/hwmon/peci/dimmtemp.c:284:2: include/linux/fortify-string.h:344:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter) The problematic code is bitmap_from_u64(priv->dimm_mask, dimm_mask); dimm_mask is declared as u64, but the bitmap in priv->dimm_mask is only 24 bit wide. On 32-bit systems, this results in writes over the end of the bitmap. Fix the problem by using u32 instead of u64 for dimm_mask. This is currently sufficient, and a compile time check to ensure that the number of dimms does not exceed the bit map size is already in place. Fixes: 73bc1b885dae ("hwmon: peci: Add dimmtemp driver") Cc: Iwona Winiarska <iwona.winiarska@intel.com> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (peci/dimmtemp) Use HWMON_CHANNEL_INFO macroGuenter Roeck1-11/+3
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @s@ identifier i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @r@ initializer list elements; identifier s.i; @@ -u32 i[] = { - elements, - 0 -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the coccinelle script. Cc: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (peci/cputemp) Use HWMON_CHANNEL_INFO macroGuenter Roeck1-22/+16
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @s@ identifier i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @r@ initializer list elements; identifier s.i; @@ -u32 i[] = { - elements, - 0 -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the coccinelle script. Cc: Iwona Winiarska <iwona.winiarska@intel.com> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-17hwmon: (peci) Use devm_delayed_work_autocancel() to simplify codeChristophe JAILLET1-10/+3
Use devm_delayed_work_autocancel() instead of hand writing it. This is less verbose and saves a few lines of code. devm_delayed_work_autocancel() uses devm_add_action() instead of devm_add_action_or_reset(). This is fine, because if the underlying memory allocation fails, no work has been scheduled yet. So there is nothing to undo. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/fd277a708ede3882d7df6831f02d2e3c0cb813b8.1644781718.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-09hwmon: peci: Add dimmtemp driverIwona Winiarska3-0/+645
Add peci-dimmtemp driver for Temperature Sensor on DIMM readings that are accessible via the processor PECI interface. The main use case for the driver (and PECI interface) is out-of-band management, where we're able to obtain thermal readings from an external entity connected with PECI, e.g. BMC on server platforms. Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-12-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09hwmon: peci: Add cputemp driverIwona Winiarska4-0/+673
Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal readings of the processor package and processor cores that are accessible via the PECI interface. The main use case for the driver (and PECI interface) is out-of-band management, where we're able to obtain the DTS readings from an external entity connected with PECI, e.g. BMC on server platforms. Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-11-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 20:31:14 +0300