summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/inc
AgeCommit message (Collapse)AuthorFilesLines
2025-01-24drm/amd/display: Add hubp cache reset when powergatingAric Cyr1-0/+2
[Why] When HUBP is power gated, the SW state can get out of sync with the hardware state causing cursor to not be programmed correctly. [How] Similar to DPP, add a HUBP reset function which is called wherever HUBP is initialized or powergated. This function will clear the cursor position and attribute cache allowing for proper programming when the HUBP is brought back up. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sung Lee <sung.lee@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add support to configure CRC window on specific CRC instanceWayne Lin1-0/+3
[Why] Have the need to specify the CRC window on specific CRC engine. dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always resets CRC engine at first. [How] Add index parameter to dc_stream_configure_crc() for selecting the desired crc engine. Additionally, add another parameter to specify whether to skip the default reset of crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: DML2.1 Post-Si CleanupRafal Ostrowski2-0/+13
[Why] There are a few cleanup and refactoring tasks that need to be done with the DML2.1 wrapper and DC interface to remove dependencies on legacy structures and N-1 prototypes. [How] Implemented pipe_ctx->global_sync. Implemented new functions to use pipe_ctx->hubp_regs and pipe_ctx->global_sync: - hubp_setup2 - hubp_setup_interdependent2 - Several other new functions for DCN 4.01 to support newer structures Removed dml21_update_pipe_ctx_dchub_regs Removed dml21_extract_legacy_watermark_set Removed dml21_populate_pipe_ctx_dlg_param Removed outdated dcn references in DML2.1 wrapper. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rostrows@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Log Hard Min Clocks and Phantom Pipe StatusSung Lee1-0/+3
[WHY] On entering/exiting idle power, certain parameters would be very useful to know for power profiling purposes. [HOW] This commit adds certain hard min clocks and pipe types to log output on idle optimization enter/exit. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Update dc_tiling_info union to structureKarthi Kandasamy2-4/+4
[WHY] The `dc_tiling_info` union previously did not have a field to specify the active GFX format, assuming only one format would be used per DCN version. from DCN4+, support for switching between different GFX formats is introduced, requiring a way to track which format is currently in use. [HOW] Updated the `dc_tiling_info` union to include a new field that explicitly indicates the currently used GFX format. This allows the system to determine the active GFX format and take the correct programming path accordingly. [Description] The union `dc_tiling_info` has been updated to support multiple GFX formats by adding a new field for identifying the active format. This update ensures that the correct programming path is followed based on the selected format. All references to `dc_tiling_info` in the codebase have been updated to reflect the new structure. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: have pretrain for dpiaPeichen Huang1-0/+8
[WHY] We like to have pretrain for dpia link so that dp and dp tunneling have aligned behavior. The Main difficult for dpia pretrain is that encoder can not get corresponded dpia port when link detection in current implementation. [HOW] 1. create enable/disable dpia output functions for dcn35 encoder and have dpia_id and other necessary info as inputs. 2. dcn35 dpia use the new functions to enable/disable output. 3. have a option to enable/disable the change. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Extend dc_stream_get_crc to support 2nd crc engineWayne Lin2-2/+2
[Why & How] Since now we can set multiple crc windows for secure display, add a new input parameter for dc_stream_get_crc to indicate to fetch crc from which crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add DP required HBlank size calc to link interfaceGeorge Shen1-0/+4
[Why] Some features, such as HBlank expansion/reduction, needs to know how much HBlank is required to support basic audio. [How] Add interface to link to calculate required HBlank size for a given link + timing combination to support basic audio (i.e. 2-channel 48KHz). Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Add support for FAMS2+ interface versionsDillon Varone1-2/+2
Current driver interface does not allow for flexibility in coexistence of multiple interface versions, so add support for checking minor interface revisions and providing appropriate programming. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Update FAMS2 config cmdAlvin Lee1-0/+1
The FAMS2 stream and sub-state have been separated into 2 different commands. Update the cmd function to send one command each for the stream and sub-state. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: add clear_tiling mi callbacksAlex Deucher1-0/+2
This adds clear_tiling callbacks to the mi structure that will be used for drm panic support to clear the tiling on a display. Mem input (mi) is used on DCE based display IPs. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
2024-12-18drm/amd/display: add clear_tiling hubp callbacksAlex Deucher1-0/+1
This adds clear_tiling callbacks to the hubp structure that will be used for drm panic support to clear the tiling on a display. hubp3 support from Jocelyn's original patch and the rest from me. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
2024-12-10drm/amd/display: Remove unused dcn_find_dcfclk_suits_allDr. David Alan Gilbert1-4/+0
dcn_find_dcfclk_suits_all() last use was removed by 2018's commit 4fd994c448a3 ("drm/amd/display: Start using the new pp_smu interface") Remove it, and the dcn_find_normalized_clock_vdd_Level helper it used. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Remove unused enable_surface_flip_reportingDr. David Alan Gilbert1-3/+0
enable_surface_flip_reporting() has been unused since it was added by commit 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: update dcn351 used clock offsetCharlene Liu1-0/+59
[why] hw register offset delta Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amd/display: Add hblank borrowing supportChris Park1-0/+2
[WHY] Some DSC timing failed at bandwidth validation due to hactive can't be evenly divided on each ODM segment. [HOW] Borrow from hblank to increase hactive to support these timing. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amd/display: Add option to retrieve detile buffer sizeSung Lee1-0/+1
[WHY] For better power profiling knowing the detile buffer size at a given point in time would be useful. [HOW] Add interface to retrieve detile buffer from dc state. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Enable Request rate limiter during C-State on dcn401Dillon Varone1-1/+1
[WHY] When C-State entry is requested, the rate limiter will be disabled which can result in high contention in the DCHUB return path. [HOW] Enable the rate limiter during C-state requests to prevent contention. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Prune Invalid Modes For HDMI OutputFangzhi Zuo1-0/+2
[Why] 1. HDMI does not have 6 bpc support. Having 6 bpc pass validation does not comply with spec. 2. Validate 420 only for native HDMI, but not apply to pcon use case. 3. Current mode validation log is not readable. [how] 1. Cap 8 bpc for dp-hdmi converter. 2. Validate yuv420 for pcon use case as well, if rgb/yuv444 8bpc cannot fit into pcon bw limitation of the link from the converter to HDMI sink. 3. Add readable pixel_format and color_depth into debug log. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Implement new backlight_level_params structureKaitlyn Tse1-2/+1
[Why] Implement the new backlight_level_params structure as part of the VBAC framework, the information in this structure is needed to be passed down to the DMCUB to identify the backlight control type, to adjust the backlight of the panel and to perform any required conversions from PWM to nits or vice versa. [How] Modified existing functions to include the new backlight_level_params structure. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Add P-State Stall Timeout Recovery Support for dcn401Dillon Varone1-0/+1
[WHY&HOW] Adds support for P-State stall timeout detection in DCHUBBUB. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: Add 3DLUT FL HW bug workaroundIlya Bakoulin1-0/+2
[Why] There is a known HW bug that causes the internal 3DLUT fetch signal to be lost at VREADY, regardless of whether the OTG lock is being held or not. A workaround is necessary to make sure that this internal signal stays up after OTG unlock. [How] Set the 3DLUT_ENABLE bit immediately before and after the unlock. Also use VUPDATE_KEEPOUT to prevent lock transition in the region between VSTARTUP and VREADY, which could cause issues with this WA sequence. Also including misc. 3DLUT DMA-related sequence fixes to address a few regressions causing corruption. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Update Interface to Check UCLK DPMAustin Zheng1-0/+4
[Why] Videos using YUV420 format may result in high power being used. Disabling MPO may result in lower power usage. Update interface that can be used to check power profile of a dc_state. [How] Add helper functions that can be used to determine power level: - get power profile after a dc_state has undergone full validation Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Revert commit Update Interface to Check UCLK DPMAustin Zheng1-4/+0
This reverts commit b8d046985c2dc41a0e264a391da4606099f8d44f. Reverting as regression discovered on certain systems and golden values need to updated. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Update Interface to Check UCLK DPMAustin Zheng1-0/+4
[Why] Videos using YUV420 format may result in high power being used. Disabling MPO may result in lower power usage. Update interface that can be used to check power profile of a dc_state. [How] Allow pstate switching in VBlank as last entry in strategy candidates. Add helper functions that can be used to determine power level: -get power profile after a dc_state has undergone full validation Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-02drm/amd/display: Wait for all pending cleared before full updateAlvin Lee1-1/+3
[Description] Before every full update we must wait for all pending updates to be cleared - this is particularly important for minimal transitions because if we don't wait for pending cleared, it will be as if there was no minimal transition at all. In OTG we must read 3 different status registers for pending cleared, one specifically for OTG updates, one specifically for OPTC updates, and the last for surface related updates. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-07drm/amd/display: fix dccg root clock optimization related hangQili Lu1-0/+1
[Why] enable dpp rcg before we disable dppclk in hw_init cause system hang/reboot [How] we remove dccg rcg related code from init into a separate function and call it after we init pipe Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Qili Lu <qili.lu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02Revert "drm/amd/display: Wait for all pending cleared before full update"Dillon Varone1-3/+1
This reverts commit f0b7dcf25834afd17df316367dfe5d4c890c713c. It is causing graphics hangs. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-28drm/amd/display: Wait for all pending cleared before full updateAlvin Lee1-1/+3
[Description] Before every full update we must wait for all pending updates to be cleared - this is particularly important for minimal transitions because if we don't wait for pending cleared, it will be as if there was no minimal transition at all. In OTG we must read 3 different status registers for pending cleared, one specifically for OTG updates, one specifically for OPTC updates, and the last for surface related updates Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-21drm/amd/display: Update HPO I/O When Handling Link Retrain Automation RequestMichael Strauss1-0/+2
[WHY] Previous multi-display HPO fix moved where HPO I/O enable/disable is performed. The codepath now taken to enable/disable HPO I/O is not used for compliance test automation, meaning that if a compliance box being driven at a DP1 rate requests retrain at UHBR, HPO I/O will remain off if it was previously off. [HOW] Explicitly update HPO I/O after allocating encoders for test request. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Unlock Pipes Based On DET AllocationAustin Zheng2-0/+6
[Why] DML21 does not allocate DET evenly between pipes. May result in underflow when unlocking the pipes as DET could be overallocated. [How] 1. Unlock pipes that have a decreased amount of DET allocation 2. Wait for the double buffer to be updated. 3. Unlock the remaining pipes. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Remove unused codeRodrigo Siqueira1-10/+0
Remove function pointers that were never used. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Remove duplicated codeRodrigo Siqueira1-3/+0
DCN_MINIMUM_DISPCLK_Khz and DCN_MINIMUM_DPPCLK_Khz is declared twice. This commit removes that duplication. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-28drm/amd/display: Add seamless boot support for more DIG operation modesNicholas Kazlauskas1-0/+1
[Why] When pre-OS firmware enables display support for displays that operate the DIG in 2 pixels per cycle processing modes the inferred pixel rate from get_pixel_clk_frequency_100hz does not account for the true pixel rate since we're outputting 2 per cycle past the stream encoder. This causes seamless boot validation to abort early. [How] Add a new stream encoder function for getting pixels per cycle from the stream encoder. If the pixels per cycle is greater than 1 and the driver policy is to enable 2 pixels per cycle for post-OS then allow seamless boot to continue. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: rename dcn3/dcn4 to more sound termsAurabindo Pillai1-1/+1
Use more accurate names to refer to the asic architecture. dcn3 in DML actually refers to DCN32 and DCN321, so rename it to dcn32x dcn4 refers to any DCN4x soc., and hence rename dcn4 to dcn4x Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Export additional FAMS2 global configuration options from DMLDillon Varone1-1/+1
[WHY&HOW] Some global configuration options were previously hardcoded in DC, now they are exported by DML and sent to FW. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Add P-State Keepout to dcn401 Global SyncDillon Varone2-2/+7
[WHY&HOW] OTG has new functionality to allow P-State relative to VStartup. Keepout region for this should be configured based on DML outputs same as other global sync params. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: avoid disable otg when dig was disabledJingwen Zhu1-0/+1
[Why] This is a workaround for an dcn3.1 hang that happens if otg dispclk is ramped while otg is on and stream enc is off. But this w/a should not trigger when we have a dig active. [How] Avoid disable otg when dig FE/BE FIFO was not switched. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Implement bias and scale pre sclRelja Vojvodic1-6/+7
why: New scaler needs the input to be full range color space. This will also fix issues that come up due to not having a predefined limited color space matrix for certain color spaces how: Use bias and scale HW to expand the range of limited color spaces to full before the scaler Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: fix dscclk programming sequence on DCN401Wenjing Liu1-4/+1
[why] The mux to switch between refclk and dto_dsc_clk is non double buffered. However dto dsc clk's phase and modulo divider registers are currently configured as double buffered update. This causes a problem when we switch to use dto dsc clk and program phase and modulo in the same sequence. In this sequence dsc clk is switched to dto but the clock divider programming doesn't take effect until next frame. When we try to program DSCC registers, SMN bus will hang because dto dsc clk divider phase is set to 0. [how] Configure phase and modulo to take effect immediately. Always switch to dto dsc clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Added logging for automated DPM testingRyan Seto2-1/+4
[Why] Added clock logs to automate DPM testing [How] Added logs and helper functions to output clocks Co-authored-by: Ryan Seto <ryanseto@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-24drm/amd/display: Disable HBR audio for DP2 for certain ASICsAlvin Lee1-0/+2
[Description] Due to a HW bug, HBR audio is not supported for DP2 encoders for certain ASICs. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd/display: Add simple struct doc to remove doc build warningRodrigo Siqueira2-5/+32
This commit is a part of a series that addresses the following build warning for opp: ./drivers/gpu/drm/amd/display/dc/inc/hw/opp.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/inc/hw/dpp.h:1: warning: no structured comments found This commit fixes this issue by adding a simple kernel-doc to a struct in the opp.h and the dpp.h files. Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd/display: Add doc entry for program_3dlut_sizeAlex Hung1-0/+14
Fixes the warning: Function parameter or struct member 'program_3dlut_size' not described in 'mpc_funcs' Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/dri-devel/20240715090445.7e9387ec@canb.auug.org.au/ Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-28drm/amd/display: Enable DCC on DCN401Aurabindo Pillai3-0/+8
[WHAT] Add registers and entry points to enable DCC on DCN4x Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-28drm/amd/display: Wait for double buffer update on ODM changesAlvin Lee1-0/+1
[WHAT & HOW] We must wait for ODM double buffer updates to complete before exiting the pipe update sequence or we may reduce DISPCLK and hit some transient underflow (pixel rate is reduced before the pipes have ODM enabled). Reviewed-by: Samson Tam <samson.tam@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Increase MAX_LINKS by 2Alex Hung1-1/+1
Two additional virtual links are created and thus increasing size for dc->links by two. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Extend PSRSU residency modeJack Chang1-1/+1
1. To support multiple PSRSU residency measurement mode Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Support new VA page table block sizeChris Park1-1/+8
[Why] Page table definition increased up to 2MB. [How] Define new use case of page table for VA. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: turn on symclk for dio virtual stream in dpms sequenceWenjing Liu1-1/+1
[why] In order to support glitchless display clock ramping for virtual stream, we must turn on symclk for stream encoder. The code will power on phy and enable symclk for dio encoder during virtual stream dpms sequence. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-05-07 03:26:40 +0300