summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/inc
AgeCommit message (Collapse)AuthorFilesLines
2018-10-10drm/amd/display: clean up encoding checksEric Yang1-1/+0
[Why] All ASICS we support has YCbCr support, so the check is unnecessary, the currently logic in validate output also returns true all the time, so the unneccessary logic is removed Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-10drm/amd/display: Calculate swizzle mode using bpp during validationSu Sung Chung2-0/+6
[Why] Previously bandwidth validation was failing because swizzle mode was not initialized during plane_state allocation. The swizzle mode was calculated using pixed format which is how swizzle mode is initially calculated in addrlib. [How] * Set default swizzle mode for validation to DC_SW_UNKNOWN * Created new function in dcn10_assign_swizzle_mode which sets the plane swizzle mode based on selected pixed format * Added the call of assign_swizzle_mode into dc_validate_global_state * Set failsafe swizzle mode back to DC_SW_LINEAR Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-27drm/amd/display: program v_update and v_ready with proper fieldSu Sung Chung1-3/+3
[WHY] There are two different variables used to calculate v_update and v_ready, one for validation and the other for performance parameter calculation. Before the variable for validation was used which caused underflow on 1080edp with vsr enabled [HOW] program v_update and v_ready with the variables for performance parameter calculation Signed-off-by: Su Sung Chung <su.chung@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-11drm/amd/display: Reorder resource_pool to put i2c with auxDavid Francis1-1/+1
[Why] The i2c and aux engines are similar, and should be placed next to eachother for readability [How] Reorder the elements of the resource_pool struct Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-11drm/amd/display: num of sw i2c/aux engines less than num of connectorsHersen Wu1-0/+1
[why] AMD Stoney reference board, there are only 2 pipes (not include underlay), and 3 connectors. resource creation, only 2 I2C/AUX engines are created. Within dc_link_aux_transfer, when pin_data_en =2, refer to enengines[ddc_pin->pin_data->en] = NULL. NULL point is referred later causing system crash. [how] each asic design has fixed number of ddc engines at hw side. for each ddc engine, create its i2x/aux engine at sw side. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-11drm/amd/display: remove unused clk_src codeDmytro Laktyushkin1-4/+0
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Support reading hw state from debugfs fileNicholas Kazlauskas1-1/+2
[Why] Logging hardware state can be done by triggering a write to the debugfs file. It would also be useful to be able to read the hardware state from the debugfs file to be able to generate a clean log without timestamps. [How] Usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log Threading is an obvious concern when dealing with multiple debugfs operations and blocking on global state in dm or dc seems unfavorable. Adding an extra parameter for the debugfs log context state is the implementation done here. Existing code that made use of DTN_INFO and its associated macros needed to be refactored to support this. We don't know the size of the log in advance so it reallocates the log string dynamically. Once the log has been generated it's copied into the user supplied buffer for the debugfs. This allows for seeking support but it's worth nothing that unlike triggering output via dmesg the hardware state might change in-between reads if your buffer size is too small. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amdgpu/display: add support for LVDS (v5)Alex Deucher2-0/+7
This adds support for LVDS displays. v2: add support for spread spectrum, sink detect v3: clean up enable_lvds_output v4: fix up link_detect v5: remove assert on 888 format Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105880 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: implement DPMS DTN test v2Jun Lei1-0/+1
[why] Existing DTN infrastructure in driver is hacky. It uses implicit log names, and also incorrect escape ID. [how] - Implement using generic DTN escape ID. - Move file logging functionality from driver to to script; driver now outputs to string/buffer - Move HWSS debug functionality to separate c file - Add debug functionalty for per-block logging as CSV - Add pretty print in python Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Create new i2c resourceDavid Francis1-0/+3
[Why] I2C code did not match dc resource model and was generally unpleasant [How] Move code into new svelte dce_i2c files, replacing various i2c objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split sw and hw code paths. Remove all redundant declarations. Use address lists to distinguish between versions. Change dce80 code to newer register access macros. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: fix PIP bugs on Dal3Gloria Li1-1/+2
[Why] There are outstanding bugs for PIP in Dal3: -Crash when toggling PIP visibility -Global Alpha is not working, Adjusting global alpha doesn’t have an effect -Cursor is not working with pip plane and pipe splits -One flash occurs when cursor enters PIP plane from top/bottom -Crash when moving PIP plane off the screen [How] Resolve divide by 0 error Implement global alpha Program cursor on all pipes Add dst rects' x and y offests into cursor position Disable cursor when it is beyond bottom/top edge Signed-off-by: Gloria Li <geling.li@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Print DPP DTN log info only for enabled pipesNikola Cornij1-0/+1
[why] There is currently a dependency on the order in which tests are executed. This is because the non-relevant state info is being printed, which results in the output based on the state from the previous test. [how] Print DPP DTN log only if the pipe is enabled. In addition to the affected per-submission DTN golden logs, included in this change is also DTN golden log update for pre-submission tests. The other DTN golden logs affected by this change will be updated upon nightly test run (which will generate the updated DTN logs). Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Add support for toggling DFS bypassNicholas Kazlauskas1-0/+5
[Why] If the hardware supports DFS bypass it will always be enabled after creation of the DCCG. DFS bypass should only be enabled when the current stream consists of a single embedded panel and the minimum display clock is below the DFS bypass threshold. [How] Add a function to the DCCG table that updates the DFS bypass state when setting the bandwidth. If the DFS bypass state is changed, the clock needs to be reprogrammed to reflect this before the DPREFCLK is updated for audio endpoints. The existing display clock value is used as the target display clock value when reprogramming since the resulting change will be equal or larger to the current value. These changes only specifically target dce110 but do offer a framework for support on other applicable targets. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: pass compat_level to hubpCharlene Liu1-1/+2
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86"Leo (Sunpeng) Li1-3/+3
This reverts commit 8624c3c4dbfe24fc6740687236a2e196f5f4bfb0. We need CONFIG_DRM_AMD_DC_DCN1_0 to guard code that is using fp math. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-21drm/amd/display: make dp_ss_off optionalDmytro Laktyushkin1-0/+1
dp_ss_off flag doesn't need to be set, so we create a link_init function if it is needed by an asic Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-14drm/amd/display: Check if clock source in use before disablingMikita Lipski1-0/+5
[why] We are disabling clock source while other pipes are still using it, because we don't verify the number of pipes that share it. [how] - Adding a function in resources to return the number of pipes sharing the clock source. - Checking that no one is sharing the clock source before disabling Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-07-27drm/amd/display: Prevent PSR from being enabled if initialization failsAnthony Koo1-1/+1
[Why] PSR_SET command is sent to the microcontroller in order to initialize parameters needed for PSR feature, such as telling the microcontroller which pipe is driving the PSR supported panel. When this command is skipped or fails, the microcontroller may program the wrong thing if driver tries to enable PSR. [How] If PSR_SET fails, do not set psr_enable flag to indicate the feature is not yet initialized. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: flatten aux_engine and engineBhawanpreet Lakha3-137/+98
[Why] engine and aux_engine are unnecessary layers we want to remove this layer. [How] flatten engine and aux engine structs into one struct called aux_engine and remove all references to the engine struct. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-27drm/amd/display: Retry link training againBhawanpreet Lakha1-1/+2
[Why] Some receivers seem to fail the first link training but are good on subsequent tries. We want to retry link training again. This fixes HTC vive pro not lighting up after being disabled. [How] Check if the link training passed without fall back if this is not the case then we retry link training. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: Decouple aux from i2cBhawanpreet Lakha3-1/+220
[Why] Aux engine is created from i2caux layer. We want to remove this layer and use the engine directly. [How] Decouple aux engine from i2caux. Move aux engine related code to dce folder and use dc resource pool to manage the engine. And use the engine functions directly Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: allow diags to skip initial link trainingTony Cheng1-1/+1
[why] diag specify what the full config and is only concerned about pass/fail at the end having inter-op code like verifiying we can actually train at reported link rate slows down diag test and add complexity we don't need [how] add dc_debug option to skip capability link trianing also remove hbr in function name as verify is not specific to hbr Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Ken Chalmers <ken.chalmers@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-19drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86Michel Dänzer1-3/+3
Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an opportunity for display with Raven Ridge accidentally not working. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-17drm/amd/display: Move address tracking out of HUBPTony Cheng1-1/+0
[Why] We sometime require remapping of FB address space to UMA [How] Move address tracking up a layer before we apply address translation Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-17drm/amd/display: Refactor SDR cursor boosting in HDR modeKrunoslav Kovac2-0/+4
[Why] Cursor boosting is done via CNVC_CUR register which is DPP, not HUBP Previous commit was implementing it in HUBP functions, and also breaking diags tests. [How] 1. Undo original commit as well as Eric's diags test fix, almost completely 2. Move programming to DPP and call via new dc_stream function 3. Also removing cur_rom_en from dpp_cursor_attributes and programming as part of normal cursor attributes as it depends on cursor color format Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Expose bunch of functions from dcn10_hw_sequencerEric Bernstein1-0/+8
v2: Remove spurious newline changes Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: remove dentist_vco_freq from resource_poolDmytro Laktyushkin1-1/+0
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Return aux replies directly to DRMHarry Wentland1-15/+7
Currently we still go through DC code that does error checking, retries, etc. There's no need for that since DRM already does that for us. This simplifies the code a bit and makes it easier to debug. This also ensures we correctly tell DRM how many bytes have actually been read, as we should. This allows DRM to correctly read the EDID on the Chamelium DP port. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: generic indirect register accessTony Cheng1-0/+46
add generic indirect register access following our register access pattern this will make it easier to review code and programming sequence, with all the complexity hidden in macro Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13Revert "drm/amd/display: make dm_dp_aux_transfer return payload bytes ↵Harry Wentland1-1/+1
instead of size" This reverts commit cc195141133ac3e767d930bedd8294ceebf1f10b. This commit was problematic on other OSes. The real solution is to leave all the error checking to DRM and don't do it in DC, which is addressed by "Return aux replies directly to DRM" later in this patchset. v2: Add reason for revert. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13Revert "drm/amd/display: Don't return ddc result and read_bytes in same ↵Harry Wentland1-3/+2
return value" This reverts commit 8a61bc085ffab3071c59efcbeff4044c034e7490. Need to revert "make dm_dp_aux_transfer return payload bytes instead of size", which this commit is based on. That commit was problematic on other OSes. The real solution is to leave all the error checking to DRM and don't do it in DC, which is addressed by "Return aux replies directly to DRM" later in this patchset. v2: Add reason for revert. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-10drm/amd/display: Make function pointer structs constHarry Wentland1-1/+1
const to avoid hard-to-find bugs where some function overrides a function pointer. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-10drm/amd/display: make function tables constChristian König1-1/+1
It is good practice to make global function tables const to avoid accidental override. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-06drm/amd/display: move dcn watermark programming to set_bandwidthDmytro Laktyushkin1-1/+1
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-06drm/amd/display: separate out wm change request dcn workaroundDmytro Laktyushkin1-0/+1
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-06drm/amd/display: get rid of cur_clks from dcn_bw_outputDmytro Laktyushkin1-2/+1
Cleans up dcn_bw_output to only contain calculated info, actual programmed values will now be stored in respective blocks. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-06drm/amd/display: rename display clock block to dccgDmytro Laktyushkin2-6/+6
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-06drm/amd/display: redesign dce/dcn clock voltage update requestDmytro Laktyushkin1-17/+4
The goal of this change is to move clock programming and voltage requests to a single function. As of this change only dce is affected. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-06drm/amd/display: replace clocks_value struct with dc_clocksDmytro Laktyushkin2-19/+5
This will avoid structs with duplicate information. Also removes pixel clock voltage request. This has no effect since pixel clock does not affect dcn voltage and this function only matters for dcn. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-15drm/amd/display: Add num_opp to resource_capsEric Bernstein1-0/+1
Number of OPPs to be instantiated is based on number of timing generators, not number of pipes. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-15drm/amd/display: add dentist frequency to resource poolDmytro Laktyushkin1-0/+1
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-15drm/amd/display: Refactor audio programmingAnthony Koo1-0/+5
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-15drm/amd/display: Add function to get optc active sizeEric Bernstein1-0/+3
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-15drm/amd/display: pass pipe_ctx straight to blank_pixel_dataEric Bernstein1-2/+1
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-19drm/amd/display: underflow/blankscreen recoveryCharlene Liu1-0/+2
[Description] for any reason, if driver detects HUBP underflow, if a debug option enabled to enable recovery. it will kick in a sequence of recovery. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-19drm/amd/display: Cleanup unused SetPlaneConfigAnthony Koo1-5/+0
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-19drm/amdgpu/display: remove VEGAM config optionAlex Deucher1-2/+0
Leftover from bringup. No need to keep it around for upstream. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/display: Don't return ddc result and read_bytes in same return valueHarry Wentland1-2/+3
The two ranges overlap. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/display: compact the rq/dlg/ttu logDmytro Laktyushkin1-21/+1
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/display: add some DTN logs for input and output tfAnthony Koo1-0/+16
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>