| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Allow BATCH operations to be submitted and the capability to be
exposed for DSA version 2 (or later) devices.
DSA version 2 devices allow safe submission of BATCH operations.
Signed-off-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Yi Sun <yi.sun@intel.com>
Tested-by: Yi Sun <yi.sun@intel.com>
Link: https://lore.kernel.org/r/20250312221511.277954-1-vinicius.gomes@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
idxd_register_bus_type() and idxd_unregister_bus_type() have been unused
since 2021's
commit d9e5481fca74 ("dmaengine: dsa: move dsa_bus_type out of idxd driver
to standalone")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20241221141635.69412-1-linux@treblig.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
After the patch to restrict the use of mmap() to CAP_SYS_RAWIO for
the currently existing devices, most applications can no longer make
use of the accelerators as in production "you don't run things as root".
To keep the DSA and IAA accelerators usable, hook up a write() method
so that applications can still submit work. In the write method,
sufficient input validation is performed to avoid the security issue
that required the mmap CAP_SYS_RAWIO check.
One complication is that the DSA device allows for indirect ("batched")
descriptors. There is no reasonable way to do the input validation
on these indirect descriptors so the write() method will not allow these
to be submitted to the hardware on affected hardware, and the sysfs
enumeration of support for the opcode is also removed.
Early performance data shows that the performance delta for most common
cases is within the noise.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
dsa_device_type, iax_device_type, idxd_wq_device_type, idxd_cdev_file_type,
idxd_cdev_device_type and idxd_group_device_type variables to be constant
structures as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240219-device_cleanup-dmaengine-v1-1-9f72f3cf3587@marliere.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
With the possibility of multiple wq drivers that can be bound to the wq,
the user config tool accel-config needs a way to know which wq driver to
bind to the wq. Introduce per wq driver_name sysfs attribute where the user
can indicate the driver to be bound to the wq. This allows accel-config to
just bind to the driver using wq->driver_name.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230908201045.4115614-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New controller support and updates to drivers.
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding"
* tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits)
dmaengine: fsl-edma: integrate v3 support
dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
dmaengine: fsl-edma: refactor chan_name setup and safety
dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
dmaengine: fsl-edma: refactor using devm_clk_get_enabled
dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
dmaengine: fsl-edma: move common IRQ handler to common.c
dmaengine: fsl-edma: Remove enum edma_version
dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
dmaengine: fsl-edma: fix build error when arch is s390
dmaengine: idxd: Fix issues with PRS disable sysfs knob
dmaengine: idxd: Allow ATS disable update only for configurable devices
dmaengine: xilinx_dma: Program interrupt delay timeout
dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
...
|
|
There are two issues in the current PRS disable sysfs store function
wq_prs_disable_store():
1. Since PRS disable knob is invisible if PRS disable is not supported
in WQ, it's redundant to check PRS support again in the store function
again. Remove the redundant PRS support check.
2. Since PRS disable is read-only when the device is not configurable,
PRS disable cannot be changed on the device. Add device configurable
check in the store function.
Fixes: f2dc327131b5 ("dmaengine: idxd: add per wq PRS disable")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230811012635.535413-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
ATS disable status in a WQ is read-only if the device is not configurable.
This change ensures that the ATS disable attribute can be modified via
sysfs only on configurable devices.
Fixes: 92de5fa2dc39 ("dmaengine: idxd: add ATS disable knob for work queues")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230811012635.535413-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Kernel workqueues were disabled due to flawed use of kernel VA and SVA
API. Now that we have the support for attaching PASID to the device's
default domain and the ability to reserve global PASIDs from SVA APIs,
we can re-enable the kernel work queues and use them under DMA API.
We also use non-privileged access for in-kernel DMA to be consistent
with the IOMMU settings. Consequently, interrupt for user privilege is
enabled for work completion IRQs.
Link: https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
Tested-by: Tony Zhu <tony.zhu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-9-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
WQ Advanced Translation Service (ATS) can be controlled only when
WQ ATS is supported. The sysfs ATS disable knob should be visible only
when the features is supported.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230712174436.3435088-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The functions that check if WQ attributes are invisible are almost
duplicate. Define a helper to simplify these functions and future
WQ attribute visibility checks as well.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230712174436.3435088-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Kernel PASID and user PASID are separately enabled. User needs to know the
user PASID enabling status to decide how to use IDXD device in user space.
This is done via the attribute /sys/bus/dsa/devices/dsa0/pasid_enabled.
It's unnecessary for user to know the kernel PASID enabling status because
user won't use the kernel PASID. But instead of showing the user PASID
enabling status, the attribute shows the kernel PASID enabling status. Fix
the issue by showing the user PASID enabling status in the attribute.
Fixes: 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230614062706.1743078-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add sysfs knob for per wq Page Request Service disable. This knob
disables PRS support for the specific wq. When this bit is set,
it also overrides the wq's block on fault enabling.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-17-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
page fault handling
Define idxd_copy_cr() to copy completion record to fault address in
user address that is found by work queue (wq) and PASID.
It will be used to write the user's completion record that the hardware
device is not able to write due to user completion record page fault.
An xarray is added to associate the PASID and mm with the
struct idxd_user_context so mm can be found by PASID and wq.
It is called when handling the completion record fault in a kernel thread
context. Switch to the mm using kthread_use_vm() and copy the
completion record to the mm via copy_to_user(). Once the copy is
completed, switch back to the current mm using kthread_unuse_mm().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-9-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a kmem cache per device for allocating event log fault context. The
context allows an event log entry to be copied and passed to a software
workqueue to be processed. Due to each device can have different sized
event log entry depending on device type, it's not possible to have a
global kmem cache.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-8-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add setup of event log feature for supported device. Event log addresses
error reporting that was lacking in gen 1 DSA devices where a second error
event does not get reported when a first event is pending software
handling. The event log allows a circular buffer that the device can push
error events to. It is up to the user to create a large enough event log
ring in order to capture the expected events. The evl size can be set in
the device sysfs attribute. By default 64 entries are supported as minimal
when event log is enabled.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-4-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for changing of the event log size. Event log is a
feature added to DSA 2.0 hardware to improve error reporting.
It supersedes the SWERROR register on DSA 1.0 hardware and hope
to prevent loss of reported errors.
The error log size determines how many error entries supported for
the device. It can be configured by the user via sysfs attribute.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add IAA (IAX) capability mask sysfs attribute to expose to applications.
The mask provides application knowledge of what capabilities this IAA
device supports. This mask is available for IAA 2.0 device or later.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230303213732.3357494-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
SWERROR register is 4 64bit wide registers. Currently the sysfs attribute
just outputs 4 64bit hex integers. Convert to output with %*pb format
specifier.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230303213732.3357494-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On DSA/IAX 1.0, TC-A and TC-B in GRPCFG are set as 1 to have best
performance and cannot be changed through sysfs knobs unless override
option is given.
The same values should be set on DSA 2.0 as well.
Fixes: ea7c8f598c32 ("dmaengine: idxd: restore traffic class defaults after wq reset")
Fixes: ade8a86b512c ("dmaengine: idxd: Set defaults for GRPCFG traffic class")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221209172141.562648-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Merge due to at_hdmac driver dependency
|
|
>From Intel IAA spec [1], Intel IAA does not support batch processing.
Two batch related default values for IAA are incorrect in current code:
(1) The max batch size of device is set during device initialization,
that indicates batch is supported. It should be always 0 on IAA.
(2) The max batch size of work queue is set to WQ_DEFAULT_MAX_BATCH (32)
as the default value regardless of Intel DSA or IAA device during
work queue setup and cleanup. It should be always 0 on IAA.
Fix the issues by setting the max batch size of device and max batch
size of work queue to 0 on IAA device, that means batch is not
supported.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: 23084545dbb0 ("dmaengine: idxd: set max_xfer and max_batch for RO device")
Fixes: 92452a72ebdf ("dmaengine: idxd: set defaults for wq configs")
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930201528.18621-2-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In current code, the following sysfs attributes are exposed to user to
show or update the values:
max_read_buffers (max_tokens)
read_buffer_limit (token_limit)
group/read_buffers_allowed (group/tokens_allowed)
group/read_buffers_reserved (group/tokens_reserved)
group/use_read_buffer_limit (group/use_token_limit)
>From Intel IAA spec [1], Intel IAA does not support Read Buffer
allocation control. So these sysfs attributes should not be supported on
IAA device.
Fix this issue by making these sysfs attributes invisible through
is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that these
attributes are not visible when the device does not support Read Buffer
allocation control.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: fde212e44f45 ("dmaengine: idxd: deprecate token sysfs attributes for read buffers")
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221022074949.11719-1-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In current code, dev.max_batch_size and wq.max_batch_size attributes in
sysfs are exposed to user to show or update the values.
>From Intel IAA spec [1], Intel IAA does not support batch processing. So
these sysfs attributes should not be supported on IAA device.
Fix this issue by making the attributes of max_batch_size invisible in
sysfs through is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that the attributes
are not visible when the device does not support batch.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size")
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930201528.18621-3-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add sysfs knob to allow control of the number of batch descriptors that can
be concurrently processed by an engine in the group as a fraction of the
Maximum Work Descriptors in Progress value specfied in ENGCAP register.
This control knob is part of toggle for QoS control.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-6-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add sysfs knob to allow control of the number of work descriptors that can
be concurrently processed by an engine in the group as a fraction of the
Maximum Work Descriptors in Progress value specified in ENGCAP register.
This control knob is part of toggle for QoS control.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-5-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DSA 2.0 add the capability of configuring DMA ops on a per workqueue basis.
This means that certain ops can be disabled by the system administrator for
certain wq. By default, all ops are available. A bitmap is used to store
the ops due to total op size of 256 bits and it is more convenient to use a
range list to specify which bits are enabled.
One of the usage to support this is for VM migration between different
iteration of devices. The newer ops are disabled in order to allow guest to
migrate to a host that only support older ops. Another usage is to
restrict the WQ to certain operations for QoS of performance.
A sysfs of ops_config attribute is added per wq. It is only usable when the
ops_config bit is set under WQ_CAP register. This means that this attribute
will return -EOPNOTSUPP on DSA 1.x devices. The expected input is a range
list for the bits per operation the WQ supports.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-4-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
To make input and output consistent and prepping for the per WQ operation
configuration support, change the output of opcap display to match the
input that is expected by bitmap_parse() helper function. The output will
be a bitmap with field width as the number of bits using the %*pb format
specifier for printk() family.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make wq attributes access consistent. Convert ats_dis to wq flag
WQ_FLAG_ATS_DISABLE.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Now that idxd_wq_disable_cleanup() sets the workqueue state to
IDXD_WQ_DISABLED, use a bitmap to track which workqueues have been
enabled. This will then be used to determine which workqueues
should be re-enabled when attempting a software reset to recover
from a device halt state.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20220928154856.623545-3-jsnitsel@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Nothing special, this includes a couple of new device support and new
driver support and bunch of driver updates.
New support:
- Tegra gpcdma driver support
- Qualcomm SM8350, Sm8450 and SC7280 device support
- Renesas RZN1 dma and platform support
Updates:
- stm32 device pause/resume support and updates
- DMA memset ops Documentation and usage clarification
- deprecate '#dma-channels' & '#dma-requests' bindings
- driver updates for stm32, ptdma idsx etc"
* tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits)
dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled
dmaengine: sun6i: Add support for the D1 variant
dmaengine: sun6i: Add support for 34-bit physical addresses
dmaengine: sun6i: Do not use virt_to_phys
dt-bindings: dma: sun50i-a64: Add compatible for D1
dmaengine: tegra: Remove unused switch case
dmaengine: tegra: Fix uninitialized variable usage
dmaengine: stm32-dma: add device_pause/device_resume support
dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction
dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()
dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg
dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor
dmaengine: qcom: gpi: Add support for sc7280
dt-bindings: dma: pl330: Add power-domains
dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it
dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
dmaengine: stm32-mdma: remove GISR1 register
dmaengine: ti: deprecate '#dma-channels'
dmaengine: mmp: deprecate '#dma-channels'
dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'
...
|
|
The idxd driver always gated the pasid enabling under a single knob and
this assumption is incorrect. The pasid used for kernel operation can be
independently toggled and has no dependency on the user pasid (and vice
versa). Split the two so they are independent "enabled" flags.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/165231431746.986466.5666862038354800551.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Block wq_max_transfer_size_store() when the device is configured as
read-only and not configurable.
Fixes: d7aad5550eca ("dmaengine: idxd: add support for configurable max wq xfer size")
Reported-by: Bernice Zhang <bernice.zhang@intel.com>
Tested-by: Bernice Zhang <bernice.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971488154.2200913.10706665404118545941.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Block wq_max_batch_size_store() when the device is configured as read-only
and not configurable.
Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size")
Reported-by: Bernice Zhang <bernice.zhang@intel.com>
Tested-by: Bernice Zhang <bernice.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971493551.2201159.1942042593642155209.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add string processing with strim() in order to remove trailing white spaces
that may be input by user for the wq->name.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164789525123.2799661.13795829125221129132.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The following sysfs attributes will be obsolete due to the name change of
tokens to read buffers:
max_tokens
token_limit
group/tokens_allowed
group/tokens_reserved
group/use_token_limit
Create new entries and have old entry print warning of deprecation.
New attributes to replace the token ones:
max_read_buffers
read_buffer_limit
group/read_buffers_allowed
group/read_buffers_reserved
group/use_read_buffer_limit
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951339488.2988321.2424012059911316373.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DSA spec v1.2 has changed the term of "bandwidth tokens" to "read buffers"
in order to make the concept clearer. Deprecate bandwidth token
naming in the driver and convert to read buffers in order to match with
the spec and reduce confusion when reading the spec.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951338932.2988321.6162640806935567317.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
With irq_entry already being associated with the wq in a 1:1 relationship,
embed the irq_entry in the idxd_wq struct and remove back pointers for
idxe_wq and idxd_device. In the process of this work, clean up the interrupt
handle assignment so that there's no decision to be made during submit
call on where interrupt handle value comes from. Set the interrupt handle
during irq request initialization time.
irq_entry 0 is designated as special and is tied to the device itself.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163942148362.2412839.12055447853311267866.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a sysfs knob to allow tuning of retries for the kernel ENQCMDS
descriptor submission. While on host, it is not as likely that ENQCMDS
return busy during normal operations due to the driver controlling the
number of descriptors allocated for submission. However, when the driver is
operating as a guest driver, the chance of retry goes up significantly due
to sharing a wq with multiple VMs. A default value is provided with the
system admin being able to tune the value on a per WQ basis.
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163820629464.2702134.7577370098568297574.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Attach int_handle to irq_entry. This removes the separate management of int
handles and reduces the confusion of interating through int handles that is
off by 1 count.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528417065.3925689.11505755433684476288.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The spinlock is not being used in hard interrupt context. There is no need
to disable irq when acquiring the lock. The interrupt thread handler also
is not in bottom half context, therefore we can also remove disabling of
the bh. Convert all dev_lock acquisition to plain spin_lock() calls.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162984026772.1939166.11504067782824765879.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The device general capability has a bit that indicate whether 'block on
fault' is supported. Add check to wq sysfs knob to check if cap exists
before allowing user to toggle.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162802992615.3084999.12539468940404102898.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Enabling device and wq returns standard errno and that does not provide
enough details to indicate what exactly failed. The hardware command status
is only 8bits. Expand the command status to 32bits and use the upper 16
bits to define software errors to provide more details on the exact
failure. Bit 31 will be used to indicate the error is software set as the
driver is using some of the spec defined hardware error as well.
Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373579.1968485.5891788397526827892.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Set GRPCFG traffic class to value of 1 for best performance on current
generation of accelerators. Also add override option to allow experimentation.
Sysfs knobs are disabled for DSA/IAX gen1 devices.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373005.1968485.3761065664382799202.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The original architecture of /sys/bus/dsa invented a scheme whereby
a single entry in the list of bus drivers, /sys/bus/drivers/dsa,
handled all device types and internally routed them to different
different drivers. Those internal drivers were invisible to
userspace.
With the idxd driver transitioned to a proper bus device-driver model,
the legacy behavior needs to be preserved due to it being exposed to
user space via sysfs. Create a compat driver to provide the legacy
behavior for /sys/bus/dsa/drivers/dsa. This should satisfy user
tool accel-config v3.2 or ealier where this behavior is expected.
If the distro has a newer accel-config then the legacy mode does
not need to be enabled.
When the compat driver binds the device (i.e. dsa0) to the dsa driver,
it will be bound to the new idxd_drv. The wq device (i.e. wq0.0) will
be bound to either the dmaengine_drv or the user_drv. The dsa_drv
becomes a routing mechansim for the new drivers. It will not support
additional external drivers that are implemented later.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468705.744545.4399080971745974435.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation for dsa_drv compat support to be built-in, move the bus
code to its own compilation unit. A follow-on patch adds the compat
implementation. Recall that the compat implementation allows for the
deprecated / omnibus dsa_drv binding scheme rather than the idiomatic
organization of a full fledged bus driver per driver type.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468142.744545.2811632736881720857.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add an array of support device types to the idxd_device_driver
definition in order to enable simple matching of device type to a
given driver. The deprecated / omnibus dsa_drv driver specifies
IDXD_DEV_NONE as its only role is to service legacy userspace (old
accel-config) directed bind requests and route them to them the proper
driver. It need not attach to a device when the bus is autoprobed. The
accel-config tooling is being updated to drop its dependency on this
deprecated bind scheme.
Reviewed-by: Dan Willliams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637465882.744545.17456174666211577867.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Don't need a wrapper to register the driver. Just do it directly.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637465319.744545.16325178432532362906.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the code related to a ->remove() function for the idxd
'struct device' to device.c to prep for the idxd device
sub-driver in device.c.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637464768.744545.15797285510999151668.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the code related to a ->probe() function for the idxd
'struct device' to device.c to prep for the idxd device
sub-driver in device.c.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637464189.744545.17423830646786162194.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
