summaryrefslogtreecommitdiff
path: root/drivers/clk/at91/dt-compat.c
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21clk: at91: clk-utmi: add support for parent_hwClaudiu Beznea1-1/+1
Add support for parent_hw in utmi clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-utmi were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-8-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-system: add support for parent_hwClaudiu Beznea1-2/+2
Add support for parent_hw in system clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-system were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-7-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-programmable: add support for parent_hwClaudiu Beznea1-1/+1
Add support for parent_hw in programmable clock driver. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-programmable were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-6-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-peripheral: add support for parent_hwClaudiu Beznea1-1/+2
Add support for parent_hw in peripheral clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-peripheral were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-5-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-master: add support for parent_hwClaudiu Beznea1-2/+2
Add support for parent_hw in master clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-master were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-4-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-generated: add support for parent_hwClaudiu Beznea1-1/+1
Add support for parent_hw in generic clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-generated were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-3-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-main: add support for parent_data/parent_hwClaudiu Beznea1-3/+3
Add support for parent_data and parent_hw in main oscillator clock drivers. With this parent-child relations are described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-main were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-2-claudiu.beznea@microchip.com
2023-01-09clk: at91: mark ddr clocks as criticalClaudiu Beznea1-2/+23
Mark DDR clocks as critical for AT91 devices. These clocks are enabled by bootloader when initializing DDR and needs to stay enabled. Up to this patch the DDR clocks were requested from drivers/memory/atmel-sdramc.c which does only clock request and enable. There is no need to have a separate driver just for this, thus the atmel-sdramc.c will be deleted in a subsequent patch. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221208114515.35179-2-claudiu.beznea@microchip.com
2022-08-20clk: at91: dt-compat: Hold reference returned by of_get_parent()Liang He1-24/+84
We need to hold the reference returned by of_get_parent() and use it to call of_node_put() for refcount balance. Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220630143949.218922-1-windhl@126.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-08clk: at91: clk-master: remove dead codeClaudiu Beznea1-2/+1
Commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master clock") removed the master clock's prescaler from clock tree of SAMA7G5 as it has been discovered that there is a hardware bug when trying to change it at run-time (bug is described in description of commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master clock")). This was previously changed at CPUFreq driver request. Thus, with commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master clock") there is no need of code that handles run-time changes of master clock's prescaler, thus remove this code. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220203110202.18329-1-claudiu.beznea@microchip.com
2021-10-27clk: at91: clk-master: add notifier for dividerClaudiu Beznea1-1/+1
SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same parent with cpuck as seen in the following clock tree: +----------> cpuck | FRAC PLL ---> DIV PLL -+-> DIV ---> mck0 mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking while changing FRAC PLL or DIV PLL the commit implements a notifier for mck0 which applies a safe divider to register (maximum value of the divider which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE events. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-13-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: re-factor master clockClaudiu Beznea1-3/+12
Re-factor master clock driver by splitting it into 2 clocks: prescaller and divider clocks. Based on registered clock flags the prescaler's rate could be changed at runtime. This is necessary for platforms supporting DVFS (e.g. SAMA7G5) where master clock could be changed at run-time. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-programmable: add mux_table optionClaudiu Beznea1-5/+6
Add mux table option. This is necessary for IP versions that has gaps in the range of available clock sources (e.g. SAMA7G5). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-15-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-peripheral: add support for changeable parent rateClaudiu Beznea1-1/+2
Some peripheral clocks on SAMA7G5 supports requesting parent to change its rate (image related clocks: csi, csi2dc, isc). Add support so that if registered with this option the clock rate to be requested from parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-14-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: add mux_table optionClaudiu Beznea1-2/+3
Add mux table option. This is necessary for IP versions that has gaps in the range of available clock sources (e.g. SAMA7G5). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: pass the id of changeable parent at registrationClaudiu Beznea1-3/+5
Pass the ID of changeable parent at registration. This will allow the scalability of this clock driver with regards to the changeable parent ID for versions of this IP where changeable parent is not the last one in the parents list (e.g. SAMA7G5). With this the clock flags are set to zero in case we have no changeable parent. Also in clk_generated_best_diff() the *best_diff variable is check against tmp_diff variable using ">=" operator instead of ">" so that in case the requested frequency could be obtained using fix parents + gck dividers but the clock also supports changeable parent to be able to force the usage of the changeable parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: allow configuring generated PCR layoutAlexandre Belloni1-1/+2
The PCR register layout for GCLKCSS is changing for the future SoCs, allow configuring it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: allow configuring peripheral PCR layoutAlexandre Belloni1-0/+9
The PCR register actually changed layout for each SoC. By chance, this didn't have impact on sama5d[2-4] support but since sama5d3, PID is seven bits wide and sama5d4 and sama5d2 don't have DIV. For the DT backward compatibility, keep the layout as is. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: move DT compatibility code to its own fileAlexandre Belloni1-0/+961
Move all the DT backward compatibility code to its own file so it can be deleted later. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 07:22:45 +0300