| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While setting up the FDT for kexec, CPU nodes that are added after the
system boots and reserved memory ranges are incorporated into the
initial_boot_params (base FDT).
However, they are not taken into account when determining the additional
size needed for the kexec FDT. As a result, kexec fails to load,
generating the following error:
[1116.774451] Error updating memory reserve map: FDT_ERR_NOSPACE
kexec_file_load failed: No such process
Therefore, consider the extra size for CPU nodes added post-system boot
and reserved memory ranges while preparing the kexec FDT.
While adding a new parameter to the setup_new_fdt_ppc64 function, it was
noticed that there were a couple of unused parameters, so they were
removed.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240510102235.2269496-2-sourabhjain@linux.ibm.com
|
|
Extend the arch crash hotplug handler, as introduced by the patch title
("powerpc: add crash CPU hotplug support"), to also support memory
add/remove events.
Elfcorehdr describes the memory of the crash kernel to capture the
kernel; hence, it needs to be updated if memory resources change due to
memory add/remove events. Therefore, arch_crash_handle_hotplug_event()
is updated to recreate the elfcorehdr and replace it with the previous
one on memory add/remove events.
The memblock list is used to prepare the elfcorehdr. In the case of
memory hot remove, the memblock list is updated after the arch crash
hotplug handler is triggered, as depicted in Figure 1. Thus, the
hot-removed memory is explicitly removed from the crash memory ranges
to ensure that the memory ranges added to elfcorehdr do not include the
hot-removed memory.
Memory remove
|
v
Offline pages
|
v
Initiate memory notify call <----> crash hotplug handler
chain for MEM_OFFLINE event
|
v
Update memblock list
Figure 1
There are two system calls, `kexec_file_load` and `kexec_load`, used to
load the kdump image. A few changes have been made to ensure that the
kernel can safely update the elfcorehdr component of the kdump image for
both system calls.
For the kexec_file_load syscall, kdump image is prepared in the kernel.
To support an increasing number of memory regions, the elfcorehdr is
built with extra buffer space to ensure that it can accommodate
additional memory ranges in future.
For the kexec_load syscall, the elfcorehdr is updated only if the
KEXEC_CRASH_HOTPLUG_SUPPORT kexec flag is passed to the kernel by the
kexec tool. Passing this flag to the kernel indicates that the
elfcorehdr is built to accommodate additional memory ranges and the
elfcorehdr segment is not considered for SHA calculation, making it safe
to update.
The changes related to this feature are kept under the CRASH_HOTPLUG
config, and it is enabled by default.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-7-sourabhjain@linux.ibm.com
|
|
Due to CPU/Memory hotplug or online/offline events, the elfcorehdr
(which describes the CPUs and memory of the crashed kernel) and FDT
(Flattened Device Tree) of kdump image becomes outdated. Consequently,
attempting dump collection with an outdated elfcorehdr or FDT can lead
to failed or inaccurate dump collection.
Going forward, CPU hotplug or online/offline events are referred as
CPU/Memory add/remove events.
The current solution to address the above issue involves monitoring the
CPU/Memory add/remove events in userspace using udev rules and whenever
there are changes in CPU and memory resources, the entire kdump image
is loaded again. The kdump image includes kernel, initrd, elfcorehdr,
FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to
CPU/Memory add/remove events, reloading the entire kdump image is
inefficient. More importantly, kdump remains inactive for a substantial
amount of time until the kdump reload completes.
To address the aforementioned issue, commit 247262756121 ("crash: add
generic infrastructure for crash hotplug support") added a generic
infrastructure that allows architectures to selectively update the kdump
image component during CPU or memory add/remove events within the kernel
itself.
In the event of a CPU or memory add/remove events, the generic crash
hotplug event handler, `crash_handle_hotplug_event()`, is triggered. It
then acquires the necessary locks to update the kdump image and invokes
the architecture-specific crash hotplug handler,
`arch_crash_handle_hotplug_event()`, to update the required kdump image
components.
This patch adds crash hotplug handler for PowerPC and enable support to
update the kdump image on CPU add/remove events. Support for memory
add/remove events is added in a subsequent patch with the title
"powerpc: add crash memory hotplug support"
As mentioned earlier, only the elfcorehdr and FDT kdump image components
need to be updated in the event of CPU or memory add/remove events.
However, on PowerPC architecture crash hotplug handler only updates the
FDT to enable crash hotplug support for CPU add/remove events. Here's
why.
The elfcorehdr on PowerPC is built with possible CPUs, and thus, it does
not need an update on CPU add/remove events. On the other hand, the FDT
needs to be updated on CPU add events to include the newly added CPU. If
the FDT is not updated and the kernel crashes on a newly added CPU, the
kdump kernel will fail to boot due to the unavailability of the crashing
CPU in the FDT. During the early boot, it is expected that the boot CPU
must be a part of the FDT; otherwise, the kernel will raise a BUG and
fail to boot. For more information, refer to commit 36ae37e3436b0
("powerpc: Make boot_cpuid common between 32 and 64-bit"). Since it is
okay to have an offline CPU in the kdump FDT, no action is taken in case
of CPU removal.
There are two system calls, `kexec_file_load` and `kexec_load`, used to
load the kdump image. Few changes have been made to ensure kernel can
safely update the FDT of kdump image loaded using both system calls.
For kexec_file_load syscall the kdump image is prepared in kernel. So to
support an increasing number of CPUs, the FDT is constructed with extra
buffer space to ensure it can accommodate a possible number of CPU
nodes. Additionally, a call to fdt_pack (which trims the unused space
once the FDT is prepared) is avoided if this feature is enabled.
For the kexec_load syscall, the FDT is updated only if the
KEXEC_CRASH_HOTPLUG_SUPPORT kexec flag is passed to the kernel by
userspace (kexec tools). When userspace passes this flag to the kernel,
it indicates that the FDT is built to accommodate possible CPUs, and the
FDT segment is excluded from SHA calculation, making it safe to update.
The changes related to this feature are kept under the CRASH_HOTPLUG
config, and it is enabled by default.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-6-sourabhjain@linux.ibm.com
|
|
Move the update_cpus_node() from kexec/{file_load_64.c => core_64.c}
to allow other kexec components to use it.
Later in the series, this function is used for in-kernel updates
to the kdump image during CPU/memory hotplug or online/offline events for
both kexec_load and kexec_file_load syscalls.
No functional changes are intended.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-5-sourabhjain@linux.ibm.com
|
|
Remove CONFIG_CRASH_DUMP dependency on CONFIG_KEXEC. CONFIG_KEXEC_CORE
was used at places where CONFIG_CRASH_DUMP or CONFIG_CRASH_RESERVE was
appropriate. Replace with appropriate #ifdefs to support CONFIG_KEXEC
and !CONFIG_CRASH_DUMP configuration option. Also, make CONFIG_FA_DUMP
dependent on CONFIG_CRASH_DUMP to avoid unmet dependencies for FA_DUMP
with !CONFIG_KEXEC_CORE configuration option.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240226103010.589537-4-hbathini@linux.ibm.com
|
|
Currently, is_kdump_kernel() returns true in crash dump capture kernel
for both kdump and fadump crash dump capturing methods, as both these
methods set elfcorehdr_addr. Some restrictions enforced for crash dump
capture kernel, based on is_kdump_kernel(), are specifically meant for
kdump case and not desirable for fadump - eg. IO queues restriction in
device drivers. So, define is_kdump_kernel() to return false when f/w
assisted dump is active.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230912082950.856977-2-hbathini@linux.ibm.com
|
|
PPC_85xx is PPC32 only.
PPC_85xx always selects E500 and is the only PPC32 that
selects E500.
FSL_BOOKE is selected when E500 and PPC32 are selected.
So FSL_BOOKE is redundant with PPC_85xx.
Remove FSL_BOOKE.
And rename four files accordingly.
cpu_setup_fsl_booke.S is not renamed because it is linked to
PPC_FSL_BOOK3E and not to FSL_BOOKE as suggested by its name.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/08e3e15594e66d63b9e89c5b4f9c35153913c28f.1663606875.git.christophe.leroy@csgroup.eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
|
|
During kdump, two set of NMI IPIs are sent to secondary CPUs, if
'crash_kexec_post_notifiers' option is set. The first set of NMI IPIs
to stop the CPUs and the other set to collect register data. Instead,
capture register data for secondary CPUs while stopping them itself.
Also, fallback to smp_send_stop() in case the function gets called
without kdump configured.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630064942.192283-1-hbathini@linux.ibm.com
|
|
Drop __weak attribute from functions in kexec_core.c:
- machine_kexec_post_load()
- arch_kexec_protect_crashkres()
- arch_kexec_unprotect_crashkres()
- crash_free_reserved_phys_range()
Link: https://lkml.kernel.org/r/c0f6219e03cb399d166d518ab505095218a902dd.1656659357.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
As requested
(http://lkml.kernel.org/r/87ee0q7b92.fsf@email.froward.int.ebiederm.org),
this series converts weak functions in kexec to use the #ifdef approach.
Quoting the 3e35142ef99fe ("kexec_file: drop weak attribute from
arch_kexec_apply_relocations[_add]") changelog:
: Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols")
: [1], binutils (v2.36+) started dropping section symbols that it thought
: were unused. This isn't an issue in general, but with kexec_file.c, gcc
: is placing kexec_arch_apply_relocations[_add] into a separate
: .text.unlikely section and the section symbol ".text.unlikely" is being
: dropped. Due to this, recordmcount is unable to find a non-weak symbol in
: .text.unlikely to generate a relocation record against.
This patch (of 2);
Drop __weak attribute from functions in kexec_file.c:
- arch_kexec_kernel_image_probe()
- arch_kimage_file_post_load_cleanup()
- arch_kexec_kernel_image_load()
- arch_kexec_locate_mem_hole()
- arch_kexec_kernel_verify_sig()
arch_kexec_kernel_image_load() calls into kexec_image_load_default(), so
drop the static attribute for the latter.
arch_kexec_kernel_verify_sig() is not overridden by any architecture, so
drop the __weak attribute.
Link: https://lkml.kernel.org/r/cover.1656659357.git.naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/2cd7ca1fe4d6bb6ca38e3283c717878388ed6788.1656659357.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
We originally added asm-prototypes.h in commit 42f5b4cacd78 ("powerpc:
Introduce asm-prototypes.h"). It's purpose was for prototypes of C
functions that are only called from asm, in order to fix sparse
warnings about missing prototypes.
A few months later Nick added a different use case in
commit 4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm")
for C prototypes for exported asm functions. This is basically the
inverse of our original usage.
Since then we've added various prototypes to asm-prototypes.h for both
reasons, meaning we now need to unstitch it all.
Dispatch prototypes of C functions into relevant headers and keep
only the prototypes for functions defined in assembly.
For the time being, leave prom_init() there because moving it
into asm/prom.h or asm/setup.h conflicts with
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o
This will be fixed later by untaggling asm/pci.h and asm/prom.h
or by renaming the function in shadowrom.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62d46904eca74042097acf4cb12c175e3067f3d1.1646413435.git.christophe.leroy@csgroup.eu
|
|
Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/
kexec`) are deserving of an `__init` macro attribute. These functions are
only called by other initialization functions and therefore should inherit
the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-2-nick.child@ibm.com
|
|
ppc_md.iommu_save() is not set anymore by any platform after
commit c40785ad305b ("powerpc/dart: Use a cachable DART").
So iommu_save() has become a nop and can be removed.
ppc_md.show_percpuinfo() is not set anymore by any platform after
commit 4350147a816b ("[PATCH] ppc64: SMU based macs cpufreq support").
Last users of ppc_md.rtc_read_val() and ppc_md.rtc_write_val() were
removed by commit 0f03a43b8f0f ("[POWERPC] Remove todc code from
ARCH=powerpc")
Last user of kgdb_map_scc() was removed by commit 17ce452f7ea3 ("kgdb,
powerpc: arch specific powerpc kgdb support").
ppc.machine_kexec_prepare() has not been used since
commit 8ee3e0d69623 ("powerpc: Remove the main legacy iSerie platform
code"). This allows the removal of machine_kexec_prepare() and the
rename of default_machine_kexec_prepare() into machine_kexec_prepare()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
[mpe: Drop prototype for default_machine_kexec_prepare() as noted by dja]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24d4ca0ada683c9436a5f812a7aeb0a1362afa2b.1630398606.git.christophe.leroy@csgroup.eu
|
|
kexec_fdt_totalsize_ppc64() includes the base FDT size in its size
calculation, but commit 3c985d31ad66 ("powerpc: Use common
of_kexec_alloc_and_setup_fdt()") changed the kexec code to use the
generic function of_kexec_alloc_and_setup_fdt() which already includes
the base FDT size. That change made the code overestimate the size a bit
by counting twice the space required for the kernel command line and
/chosen properties.
Therefore change kexec_fdt_totalsize_ppc64() to calculate just the extra
space needed by the kdump kernel, and change the function name so that it
better reflects what the function is now doing.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
[robh: reword commit msg as no longer a fix from merging to branches]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210220005204.1417200-1-bauerman@linux.ibm.com
|
|
delete_fdt_mem_rsv() defined in "arch/powerpc/kexec/file_load.c"
has been renamed to fdt_find_and_del_mem_rsv(), and moved to
"drivers/of/kexec.c".
Remove delete_fdt_mem_rsv() in "arch/powerpc/kexec/file_load.c".
Co-developed-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-13-nramas@linux.microsoft.com
|
|
The functions defined in "arch/powerpc/kexec/ima.c" handle setting up
and freeing the resources required to carry over the IMA measurement
list from the current kernel to the next kernel across kexec system call.
These functions do not have architecture specific code, but are
currently limited to powerpc.
Move remove_ima_buffer() and setup_ima_buffer() calls into
of_kexec_alloc_and_setup_fdt() defined in "drivers/of/kexec.c".
Move the remaining architecture independent functions from
"arch/powerpc/kexec/ima.c" to "drivers/of/kexec.c".
Delete "arch/powerpc/kexec/ima.c" and "arch/powerpc/include/asm/ima.h".
Remove references to the deleted files and functions in powerpc and
in ima.
Co-developed-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-11-nramas@linux.microsoft.com
|
|
The fields ima_buffer_addr and ima_buffer_size in "struct kimage_arch"
for powerpc are used to carry forward the IMA measurement list across
kexec system call. These fields are not architecture specific, but are
currently limited to powerpc.
arch_ima_add_kexec_buffer() defined in "arch/powerpc/kexec/ima.c"
sets ima_buffer_addr and ima_buffer_size for the kexec system call.
This function does not have architecture specific code, but is
currently limited to powerpc.
Move ima_buffer_addr and ima_buffer_size to "struct kimage".
Set ima_buffer_addr and ima_buffer_size in ima_add_kexec_buffer()
in security/integrity/ima/ima_kexec.c.
Co-developed-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Will Deacon <will@kernel.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-9-nramas@linux.microsoft.com
|
|
The code for setting up the /chosen node in the device tree
and updating the memory reservation for the next kernel has been
moved to of_kexec_alloc_and_setup_fdt() defined in "drivers/of/kexec.c".
Use the common of_kexec_alloc_and_setup_fdt() to setup the device tree
and update the memory reservation for kexec for powerpc.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-8-nramas@linux.microsoft.com
|
|
ELF related fields elf_headers, elf_headers_sz, and elfcorehdr_addr
have been moved from 'struct kimage_arch' to 'struct kimage' as
elf_headers, elf_headers_sz, and elf_load_addr respectively.
Use the ELF fields defined in 'struct kimage'.
Suggested-by: Rob Herring <robh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-4-nramas@linux.microsoft.com
|
|
On systems with large amount of memory, loading kdump kernel through
kexec_file_load syscall may fail with the below error:
"Failed to update fdt with linux,drconf-usable-memory property"
This happens because the size estimation for kdump kernel's FDT does
not account for the additional space needed to setup usable memory
properties. Fix it by accounting for the space needed to include
linux,usable-memory & linux,drconf-usable-memory properties while
estimating kdump kernel's FDT size.
Fixes: 6ecd0163d360 ("powerpc/kexec_file: Add appropriate regions for memory reserve map")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161243826811.119001.14083048209224609814.stgit@hbathini
|
|
Prepare elf headers for the crashing kernel's core file using
crash_prepare_elf64_headers() and pass on this info to kdump kernel by
updating its command line with elfcorehdr parameter. Also, add
elfcorehdr location to reserve map to avoid it from being stomped on
while booting.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Ensure cmdline is nul terminated]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602298855.575379.15819225623219909517.stgit@hbathini
|
|
Though kdump kernel boots from loaded address, the first 64KB of it is
copied down to real 0. So, setup a backup region and let purgatory
copy the first 64KB of crashed kernel into this backup region before
booting into kdump kernel. Update reserve map with backup region and
crashed kernel's memory to avoid kdump kernel from accidentially using
that memory.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602294718.575379.16216507537038008623.stgit@hbathini
|
|
crashkernel region could have an overlap with special memory regions
like OPAL, RTAS, TCE table & such. These regions are referred to as
excluded memory ranges. Setup these ranges during image probe in order
to avoid them while finding the buffer for different kdump segments.
Override arch_kexec_locate_mem_hole() to locate a memory hole taking
these ranges into account.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602281047.575379.6636807148335160795.stgit@hbathini
|
|
Some of the kexec_file_load code isn't PPC64 specific. Move PPC64
specific code from kexec/file_load.c to kexec/file_load_64.c. Also,
rename purgatory/trampoline.S to purgatory/trampoline_64.S in the same
spirit. No functional changes.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159602276920.575379.10390965946438306388.stgit@hbathini
|
|
As we kexec across kernels that use AMR/IAMR for different purposes
we need to ensure that new kernels get kexec'd with a reset value
of AMR/IAMR. For ex: the new kernel can use key 0 for kernel mapping and the old
AMR value prevents access to key 0.
This patch also removes reset if IAMR and AMOR in kexec_sequence. Reset of AMOR
is not needed and the IAMR reset is partial (it doesn't do the reset
on secondary cpus) and is redundant with this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-19-aneesh.kumar@linux.ibm.com
|
|
In the old days, _PAGE_EXEC didn't exist on 6xx aka book3s/32.
Therefore, allthough __mapin_ram_chunk() was already mapping kernel
text with PAGE_KERNEL_TEXT and the rest with PAGE_KERNEL, the entire
memory was executable. Part of the memory (first 512kbytes) was
mapped with BATs instead of page table, but it was also entirely
mapped as executable.
In commit 385e89d5b20f ("powerpc/mm: add exec protection on
powerpc 603"), we started adding exec protection to some 6xx, namely
the 603, for pages mapped via pagetables.
Then, in commit 63b2bc619565 ("powerpc/mm/32s: Use BATs for
STRICT_KERNEL_RWX"), the exec protection was extended to BAT mapped
memory, so that really only the kernel text could be executed.
The problem here is that kexec is based on copying some code into
upper part of memory then executing it from there in order to install
a fresh new kernel at its definitive location.
However, the code is position independant and first part of it is
just there to deactivate the MMU and jump to the second part. So it
is possible to run this first part inplace instead of running the
copy. Once the MMU is off, there is no protection anymore and the
second part of the code will just run as before.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Fixes: 63b2bc619565 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
As arch_kexec_kernel_image_{probe,load}(),
arch_kimage_file_post_load_cleanup() and arch_kexec_kernel_verify_sig()
are almost duplicated among architectures, they can be commonalized with
an architecture-defined kexec_file_ops array. So let's factor them out.
Link: http://lkml.kernel.org/r/20180306102303.9063-3-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Dave Young <dyoung@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If KEXEC_CORE is not enabled, powernv builds fail as follows.
arch/powerpc/platforms/powernv/smp.c: In function 'pnv_smp_cpu_kill_self':
arch/powerpc/platforms/powernv/smp.c:236:4: error:
implicit declaration of function 'crash_ipi_callback'
Add dummy function calls, similar to kdump_in_progress(), to solve the
problem.
Fixes: 4145f358644b ("powernv/kdump: Fix cases where the kdump kernel can get HMI's")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Certain HMI's such as malfunction error propagate through
all threads/core on the system. If a thread was offline
prior to us crashing the system and jumping to the kdump
kernel, bad things happen when it wakes up due to an HMI
in the kdump kernel.
There are several possible ways to solve this problem
1. Put the offline cores in a state such that they are
not woken up for machine check and HMI errors. This
does not work, since we might need to wake up offline
threads to handle TB errors
2. Ignore HMI errors, setup HMEER to mask HMI errors,
but this still leads the window open for any MCEs
and masking them for the duration of the dump might
be a concern
3. Wake up offline CPUs, as in send them to
crash_ipi_callback (not wake them up as in mark them
online as seen by the hotplug). kexec does a
wake_online_cpus() call, this patch does something
similar, but instead sends an IPI and forces them to
crash_ipi_callback()
This patch takes approach #3.
Care is taken to enable this only for powenv platforms
via crash_wake_offline (a global value set at setup
time). The crash code sends out IPI's to all CPU's
which then move to crash_ipi_callback and kexec_smp_wait().
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The IMA kexec buffer allows the currently running kernel to pass the
measurement list via a kexec segment to the kernel that will be kexec'd.
This is the architecture-specific part of setting up the IMA kexec
buffer for the next kernel. It will be used in the next patch.
Link: http://lkml.kernel.org/r/1480554346-29071-6-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "ima: carry the measurement list across kexec", v8.
The TPM PCRs are only reset on a hard reboot. In order to validate a
TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement
list of the running kernel must be saved and then restored on the
subsequent boot, possibly of a different architecture.
The existing securityfs binary_runtime_measurements file conveniently
provides a serialized format of the IMA measurement list. This patch
set serializes the measurement list in this format and restores it.
Up to now, the binary_runtime_measurements was defined as architecture
native format. The assumption being that userspace could and would
handle any architecture conversions. With the ability of carrying the
measurement list across kexec, possibly from one architecture to a
different one, the per boot architecture information is lost and with it
the ability of recalculating the template digest hash. To resolve this
problem, without breaking the existing ABI, this patch set introduces
the boot command line option "ima_canonical_fmt", which is arbitrarily
defined as little endian.
The need for this boot command line option will be limited to the
existing version 1 format of the binary_runtime_measurements.
Subsequent formats will be defined as canonical format (eg. TPM 2.0
support for larger digests).
A simplified method of Thiago Bauermann's "kexec buffer handover" patch
series for carrying the IMA measurement list across kexec is included in
this patch set. The simplified method requires all file measurements be
taken prior to executing the kexec load, as subsequent measurements will
not be carried across the kexec and restored.
This patch (of 10):
The IMA kexec buffer allows the currently running kernel to pass the
measurement list via a kexec segment to the kernel that will be kexec'd.
The second kernel can check whether the previous kernel sent the buffer
and retrieve it.
This is the architecture-specific part which enables IMA to receive the
measurement list passed by the previous kernel. It will be used in the
next patch.
The change in machine_kexec_64.c is to factor out the logic of removing
an FDT memory reservation so that it can be used by remove_ima_buffer.
Link: http://lkml.kernel.org/r/1480554346-29071-2-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds the support code needed for implementing
kexec_file_load() on powerpc.
This consists of functions to load the ELF kernel, either big or little
endian, and setup the purgatory enviroment which switches from the first
kernel to the second kernel.
None of this code is built yet, as it depends on CONFIG_KEXEC_FILE which
we have not yet defined. Although we could define CONFIG_KEXEC_FILE in
this patch, we'd then have a window in history where the kconfig symbol
is present but the syscall is not, which would be awkward.
Signed-off-by: Josh Sklar <sklar@linux.vnet.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 2965faa5e03d ("kexec: split kexec_load syscall from kexec core
code") introduced CONFIG_KEXEC_CORE so that CONFIG_KEXEC means whether
the kexec_load system call should be compiled-in and CONFIG_KEXEC_FILE
means whether the kexec_file_load system call should be compiled-in.
These options can be set independently from each other.
Since until now powerpc only supported kexec_load, CONFIG_KEXEC and
CONFIG_KEXEC_CORE were synonyms. That is not the case anymore, so we
need to make a distinction. Almost all places where CONFIG_KEXEC was
being used should be using CONFIG_KEXEC_CORE instead, since
kexec_file_load also needs that code compiled in.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In LE kernel, we currently have a hack for kexec that resets the exception
endian before starting a new kernel as the kernel that is loaded could be a
big endian or a little endian kernel. In kdump case, resetting exception
endian fails when one or more cpus is disabled. But we can ignore the failure
and still go ahead, as in most cases crashkernel will be of same endianess
as primary kernel and reseting endianess is not even needed in those cases.
This patch adds a new inline function to say if this is kdump path. This
function is used at places where such a check is needed.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
[mpe: Rename to kdump_in_progress(), use bool, and edit comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
There were a number of prototypes for functions that no longer
exist. Remove them.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Remove some unnecessary defines and fix some spelling mistakes.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
We have a lot of complicated logic that handles possible recursion between
kdump and a system reset exception. We can solve this in a much simpler
way using the same setjmp/longjmp tricks xmon does.
As a first step, this patch removes the old system reset code.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
This patch adds kexec support for PPC440 based chipsets. This work is based
on the KEXEC patches for FSL BookE.
The FSL BookE patch and the code flow could be found at the link below:
http://patchwork.ozlabs.org/patch/49359/
Steps:
1) Invalidate all the TLB entries except the one this code is run from
2) Create a tmp mapping for our code in the other address space and jump to it
3) Invalidate the entry we used
4) Create a 1:1 mapping for 0-2GiB in blocks of 256M
5) Jump to the new 1:1 mapping and invalidate the tmp mapping
I have tested this patches on Ebony, Sequoia boards and Virtex on QEMU.
You need kexec-tools commit e8b7939b1e or newer for ppc440x support,
available at:
git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
|
|
Adapt new API.
Almost change is trivial. Most important change is the below line
because we plan to change task->cpus_allowed implementation.
- ctx->cpus_allowed = current->cpus_allowed;
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
Right now just the kexec crash pathway turns turns off the interrupts.
Pull that out and make a generic version for use elsewhere
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
The KEXEC_*_MEMORY_LIMITs are inclusive addresses. We define them as
2Gs as that is what we allow mapping via TLBs. However, this should be
2G - 1 to be inclusive, otherwise if we have >2G of memory in a system
we fail to boot properly via kexec.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
This adds support kexec on FSL-BookE where the MMU can not be simply
switched off. The code borrows the initial MMU-setup code to create the
identical mapping mapping. The only difference to the original boot code
is the size of the mapping(s) and the executeable address.
The kexec code maps the first 2 GiB of memory in 256 MiB steps. This
should work also on e500v1 boxes.
SMP support is still not available.
(Kumar: Added minor change to build to ifdef CONFIG_PPC_STD_MMU_64 some
code that was PPC64 specific)
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
In kexec_prepare_cpus, the primary CPU IPIs the secondary CPUs to
kexec_smp_down(). kexec_smp_down() calls kexec_smp_wait() which sets
the hw_cpu_id() to -1. The primary does this while leaving IRQs on
which means the primary can take a timer interrupt which can lead to
the IPIing one of the secondary CPUs (say, for a scheduler re-balance)
but since the secondary CPU now has a hw_cpu_id = -1, we IPI CPU
-1... Kaboom!
We are hitting this case regularly on POWER7 machines.
There is also a second race, where the primary will tear down the MMU
mappings before knowing the secondaries have entered real mode.
Also, the secondaries are clearing out any pending IPIs before
guaranteeing that no more will be received.
This changes kexec_prepare_cpus() so that we turn off IRQs in the
primary CPU much earlier. It adds a paca flag to say that the
secondaries have entered the kexec_smp_down() IPI and turned off IRQs,
rather than overloading hw_cpu_id with -1. This new paca flag is
again used to in indicate when the secondaries has entered real mode.
It also ensures that all CPUs have their IRQs off before we clear out
any pending IPI requests (in kexec_cpu_down()) to ensure there are no
trailing IPIs left unacknowledged.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The patch replaces internal registers dump implementation with
ppc_save_regs(). From now on PPC64 and PPC32 are using the same
code for crash_setup_regs().
NOTE: The old regs dump implementation was capturing SP (r1) directly
as is, so you could see crash_kexec() function on top of the back-trace.
But ppc_save_regs() goes up one stack frame, so you'll not see it
anymore, at the top-level you'll see who actually triggered the crash
dump instead.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
This replaces the dummy crash_setup_regs function with full-fledged
crash_setup_regs implementation. On PPC32 we simply use the new
ppc_save_regs function to dump the registers.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZE, because control
page is used for not only code on some platform. For example in kexec
jump, it is used for data and stack too.
[akpm@linux-foundation.org: unbreak powerpc and arm, finish conversion]
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
from include/asm-powerpc. This is the result of a
mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm
Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly. Of the latter only
one was outside the arch code and it is a driver only built for powerpc.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
