summaryrefslogtreecommitdiff
path: root/arch/m68k
AgeCommit message (Collapse)AuthorFilesLines
2024-09-24Merge tag 'm68knommu-for-v6.12' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fixlet from Greg Ungerer: "Only a single change, cleaning up white space in debug message" * tag 'm68knommu-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: remove trailing space after \n newline
2024-09-17Merge tag 'm68k-for-v6.12-tag1' of ↵Linus Torvalds14-35/+6
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Use swap() helper for __arch_xchg() - Fix kernel_clone_args.flags in m68k_clone() - defconfig updates * tag 'm68k-for-v6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: defconfig: Update defconfigs for v6.11-rc1 m68k: Fix kernel_clone_args.flags in m68k_clone() m68k: cmpxchg: Use swap() to improve code
2024-09-09m68k: remove trailing space after \n newlineColin Ian King1-1/+1
There is a extraneous space after a newline in a pr_debug message. Remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2024-09-08treewide: Fix wrong singular form of jiffies in commentsAnna-Maria Behnsen1-1/+1
There are several comments all over the place, which uses a wrong singular form of jiffies. Replace 'jiffie' by 'jiffy'. No functional change. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
2024-08-26m68k: defconfig: Update defconfigs for v6.11-rc1Geert Uytterhoeven12-24/+0
- Drop CONFIG_CRYPTO_SM2=m (removed in commit 46b3ff73afc815f1 ("crypto: sm2 - Remove sm2 algorithm")), - Drop CONFIG_TEST_USER_COPY=m (replaced by auto-modular CONFIG_USERCOPY_KUNIT_TEST in commit cf6219ee889fb304 ("usercopy: Convert test_user_copy to KUnit test")). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/bfe0530e290cee9d350f89c4d41436f3de7cb2a5.1722248695.git.geert@linux-m68k.org
2024-08-26m68k: Fix kernel_clone_args.flags in m68k_clone()Finn Thain1-1/+1
Stan Johnson recently reported a failure from the 'dump' command: DUMP: Date of this level 0 dump: Fri Aug 9 23:37:15 2024 DUMP: Dumping /dev/sda (an unlisted file system) to /dev/null DUMP: Label: none DUMP: Writing 10 Kilobyte records DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 3595695 blocks. DUMP: Context save fork fails in parent 671 The dump program uses the clone syscall with the CLONE_IO flag, that is, flags == 0x80000000. When that value is promoted from long int to u64 by m68k_clone(), it undergoes sign-extension. The new value includes CLONE_INTO_CGROUP so the validation in cgroup_css_set_fork() fails and the syscall returns -EBADF. Avoid sign-extension by casting to u32. Reported-by: Stan Johnson <userm57@yahoo.com> Closes: https://lists.debian.org/debian-68k/2024/08/msg00000.html Fixes: 6aabc1facdb2 ("m68k: Implement copy_thread_tls()") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/3463f1e5d4e95468dc9f3368f2b78ffa7b72199b.1723335149.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-08-26m68k: cmpxchg: Use swap() to improve codeThorsten Blum1-10/+5
Remove the local variable tmp and use the swap() macro instead. Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20240730234506.492743-2-thorsten.blum@toblux.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-07-24Merge tag 'kbuild-v6.11' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove tristate choice support from Kconfig - Stop using the PROVIDE() directive in the linker script - Reduce the number of links for the combination of CONFIG_KALLSYMS and CONFIG_DEBUG_INFO_BTF - Enable the warning for symbol reference to .exit.* sections by default - Fix warnings in RPM package builds - Improve scripts/make_fit.py to generate a FIT image with separate base DTB and overlays - Improve choice value calculation in Kconfig - Fix conditional prompt behavior in choice in Kconfig - Remove support for the uncommon EMAIL environment variable in Debian package builds - Remove support for the uncommon "name <email>" form for the DEBEMAIL environment variable - Raise the minimum supported GNU Make version to 4.0 - Remove stale code for the absolute kallsyms - Move header files commonly used for host programs to scripts/include/ - Introduce the pacman-pkg target to generate a pacman package used in Arch Linux - Clean up Kconfig * tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits) kbuild: doc: gcc to CC change kallsyms: change sym_entry::percpu_absolute to bool type kallsyms: unify seq and start_pos fields of struct sym_entry kallsyms: add more original symbol type/name in comment lines kallsyms: use \t instead of a tab in printf() kallsyms: avoid repeated calculation of array size for markers kbuild: add script and target to generate pacman package modpost: use generic macros for hash table implementation kbuild: move some helper headers from scripts/kconfig/ to scripts/include/ Makefile: add comment to discourage tools/* addition for kernel builds kbuild: clean up scripts/remove-stale-files kconfig: recursive checks drop file/lineno kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec kallsyms: get rid of code for absolute kallsyms kbuild: Create INSTALL_PATH directory if it does not exist kbuild: Abort make on install failures kconfig: remove 'e1' and 'e2' macros from expression deduplication kconfig: remove SYMBOL_CHOICEVAL flag kconfig: add const qualifiers to several function arguments kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups() ...
2024-07-20kbuild: Abort make on install failuresZhang Bingwu1-0/+2
Setting '-e' flag tells shells to exit with error exit code immediately after any of commands fails, and causes make(1) to regard recipes as failed. Before this, make will still continue to succeed even after the installation failed, for example, for insufficient permission or directory does not exist. Signed-off-by: Zhang Bingwu <xtexchooser@duck.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-07-16Merge tag 'asm-generic-6.11' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix" * tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: vmlinux.lds.h: catch .bss..L* sections into BSS") fixmap: Remove unused set_fixmap_offset_io() riscv: convert to generic syscall table openrisc: convert to generic syscall table nios2: convert to generic syscall table loongarch: convert to generic syscall table hexagon: use new system call table csky: convert to generic syscall table arm64: rework compat syscall macros arm64: generate 64-bit syscall.tbl arm64: convert unistd_32.h to syscall.tbl format arc: convert to generic syscall table clone3: drop __ARCH_WANT_SYS_CLONE3 macro kbuild: add syscall table generation to scripts/Makefile.asm-headers kbuild: verify asm-generic header list loongarch: avoid generating extra header files um: don't generate asm/bpf_perf_event.h csky: drop asm/gpio.h wrapper syscalls: add generic scripts/syscall.tbl
2024-07-16Merge tag 'm68k-for-v6.11-tag1' of ↵Linus Torvalds17-6/+25
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Fix bootup lock-ups on Warp1260, Atari TT, and MegaSTe - Miscellaneous fixes and improvements - defconfig updates * tag 'm68k-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: cmpxchg: Fix return value for default case in __arch_xchg() m68k: defconfig: Update defconfigs for v6.10-rc1 m68k: atari: Fix TT bootup freeze / unexpected (SCU) interrupt messages zorro: Use str_plural() in amiga_zorro_probe() m68k: emu: Add missing MODULE_DESCRIPTION() macros m68k: amiga: Turn off Warp1260 interrupts during boot
2024-07-10clone3: drop __ARCH_WANT_SYS_CLONE3 macroArnd Bergmann1-1/+0
When clone3() was introduced, it was not obvious how each architecture deals with setting up the stack and keeping the register contents in a fork()-like system call, so this was left for the architecture maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those that already implement it. Five years later, we still have a few architectures left that are missing clone3(), and the macro keeps getting in the way as it's fundamentally different from all the other __ARCH_WANT_SYS_* macros that are meant to provide backwards-compatibility with applications using older syscalls that are no longer provided by default. Address this by reversing the polarity of the macro, adding an __ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3 from all the other ones. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09m68k: cmpxchg: Fix return value for default case in __arch_xchg()Thorsten Blum1-1/+1
The return value of __invalid_xchg_size() is assigned to tmp instead of the return variable x. Assign it to x instead. Fixes: 2501cf768e4009a0 ("m68k: Fix xchg/cmpxchg to fail to link if given an inappropriate pointer") Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20240702034116.140234-2-thorsten.blum@toblux.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-07-08block: add a bvec_phys helperChristoph Hellwig1-1/+1
Get callers out of poking into bvec internals a bit more. Not a huge win right now, but with the proposed new DMA mapping API we might end up with a lot more of this otherwise. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20240706075228.2350978-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-07-01m68k: defconfig: Update defconfigs for v6.10-rc1Geert Uytterhoeven12-0/+12
- Enable modular build of the new Packet Forwarding Control Protocol (PFCP). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/442176a8cd763e366ab9199b297919486c7f75f4.1716805119.git.geert@linux-m68k.org
2024-07-01m68k: atari: Fix TT bootup freeze / unexpected (SCU) interrupt messagesEero Tamminen1-5/+1
Avoid freeze on Atari TT / MegaSTe boot with continuous messages of: unexpected interrupt from 112 Which was due to VBL interrupt being enabled in SCU sys mask, but there being no handler for that any more. (Bug and fix were first verified on real Atari TT HW by Christian, this patch later on in Hatari emulator.) Fixes: 1fa0b29f3a43f9dd ("fbdev: Kill Atari vblank cursor blinking") Reported-by: Nicolas Pomarède <npomarede@corp.free.fr> Closes: https://listengine.tuxfamily.org/lists.tuxfamily.org/hatari-devel/2024/06/msg00016.html Closes: https://lore.kernel.org/all/9aa793d7-82ed-4fbd-bce5-60810d8a9119@helsinkinet.fi Tested-by: Christian Zietz <czietz@gmx.net> Signed-off-by: Eero Tamminen <oak@helsinkinet.fi> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/20240624144901.5236-1-oak@helsinkinet.fi Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-06-24m68k: emu: Add missing MODULE_DESCRIPTION() macrosJeff Johnson2-0/+2
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in arch/m68k/emu/nfblock.o WARNING: modpost: missing MODULE_DESCRIPTION() in arch/m68k/emu/nfcon.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240617-md-m68k-arch-m68k-v1-1-57d38beaeb13@quicinc.com [geert: s/ARAnyM/Atari NatFeat/] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-06-19block: move the nonrot flag to queue_limitsChristoph Hellwig1-0/+1
Move the nonrot flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Use the chance to switch to defaulting to non-rotational and require the driver to opt into rotational, which matches the polarity of the sysfs interface. For the z2ram, ps3vram, 2x memstick, ubiblock and dcssblk the new rotational flag is not set as they clearly are not rotational despite this being a behavior change. There are some other drivers that unconditionally set the rotational flag to keep the existing behavior as they arguably can be used on rotational devices even if that is probably not their main use today (e.g. virtio_blk and drbd). The flag is automatically inherited in blk_stack_limits matching the existing behavior in dm and md. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240617060532.127975-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-04m68k: amiga: Turn off Warp1260 interrupts during bootPaolo Pisati1-0/+9
On an Amiga 1200 equipped with a Warp1260 accelerator, an interrupt storm coming from the accelerator board causes the machine to crash in local_irq_enable() or auto_irq_enable(). Disabling interrupts for the Warp1260 in amiga_parse_bootinfo() fixes the problem. Link: https://lore.kernel.org/r/ZkjwzVwYeQtyAPrL@amaterasu.local Cc: stable <stable@kernel.org> Signed-off-by: Paolo Pisati <p.pisati@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20240601153254.186225-1-p.pisati@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-05-24mseal: wire up mseal syscallJeff Xu1-0/+1
Patch series "Introduce mseal", v10. This patchset proposes a new mseal() syscall for the Linux kernel. In a nutshell, mseal() protects the VMAs of a given virtual memory range against modifications, such as changes to their permission bits. Modern CPUs support memory permissions, such as the read/write (RW) and no-execute (NX) bits. Linux has supported NX since the release of kernel version 2.6.8 in August 2004 [1]. The memory permission feature improves the security stance on memory corruption bugs, as an attacker cannot simply write to arbitrary memory and point the code to it. The memory must be marked with the X bit, or else an exception will occur. Internally, the kernel maintains the memory permissions in a data structure called VMA (vm_area_struct). mseal() additionally protects the VMA itself against modifications of the selected seal type. Memory sealing is useful to mitigate memory corruption issues where a corrupted pointer is passed to a memory management system. For example, such an attacker primitive can break control-flow integrity guarantees since read-only memory that is supposed to be trusted can become writable or .text pages can get remapped. Memory sealing can automatically be applied by the runtime loader to seal .text and .rodata pages and applications can additionally seal security critical data at runtime. A similar feature already exists in the XNU kernel with the VM_FLAGS_PERMANENT [3] flag and on OpenBSD with the mimmutable syscall [4]. Also, Chrome wants to adopt this feature for their CFI work [2] and this patchset has been designed to be compatible with the Chrome use case. Two system calls are involved in sealing the map: mmap() and mseal(). The new mseal() is an syscall on 64 bit CPU, and with following signature: int mseal(void addr, size_t len, unsigned long flags) addr/len: memory range. flags: reserved. mseal() blocks following operations for the given memory range. 1> Unmapping, moving to another location, and shrinking the size, via munmap() and mremap(), can leave an empty space, therefore can be replaced with a VMA with a new set of attributes. 2> Moving or expanding a different VMA into the current location, via mremap(). 3> Modifying a VMA via mmap(MAP_FIXED). 4> Size expansion, via mremap(), does not appear to pose any specific risks to sealed VMAs. It is included anyway because the use case is unclear. In any case, users can rely on merging to expand a sealed VMA. 5> mprotect() and pkey_mprotect(). 6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous memory, when users don't have write permission to the memory. Those behaviors can alter region contents by discarding pages, effectively a memset(0) for anonymous memory. The idea that inspired this patch comes from Stephen Röttger’s work in V8 CFI [5]. Chrome browser in ChromeOS will be the first user of this API. Indeed, the Chrome browser has very specific requirements for sealing, which are distinct from those of most applications. For example, in the case of libc, sealing is only applied to read-only (RO) or read-execute (RX) memory segments (such as .text and .RELRO) to prevent them from becoming writable, the lifetime of those mappings are tied to the lifetime of the process. Chrome wants to seal two large address space reservations that are managed by different allocators. The memory is mapped RW- and RWX respectively but write access to it is restricted using pkeys (or in the future ARM permission overlay extensions). The lifetime of those mappings are not tied to the lifetime of the process, therefore, while the memory is sealed, the allocators still need to free or discard the unused memory. For example, with madvise(DONTNEED). However, always allowing madvise(DONTNEED) on this range poses a security risk. For example if a jump instruction crosses a page boundary and the second page gets discarded, it will overwrite the target bytes with zeros and change the control flow. Checking write-permission before the discard operation allows us to control when the operation is valid. In this case, the madvise will only succeed if the executing thread has PKEY write permissions and PKRU changes are protected in software by control-flow integrity. Although the initial version of this patch series is targeting the Chrome browser as its first user, it became evident during upstream discussions that we would also want to ensure that the patch set eventually is a complete solution for memory sealing and compatible with other use cases. The specific scenario currently in mind is glibc's use case of loading and sealing ELF executables. To this end, Stephen is working on a change to glibc to add sealing support to the dynamic linker, which will seal all non-writable segments at startup. Once this work is completed, all applications will be able to automatically benefit from these new protections. In closing, I would like to formally acknowledge the valuable contributions received during the RFC process, which were instrumental in shaping this patch: Jann Horn: raising awareness and providing valuable insights on the destructive madvise operations. Liam R. Howlett: perf optimization. Linus Torvalds: assisting in defining system call signature and scope. Theo de Raadt: sharing the experiences and insight gained from implementing mimmutable() in OpenBSD. MM perf benchmarks ================== This patch adds a loop in the mprotect/munmap/madvise(DONTNEED) to check the VMAs’ sealing flag, so that no partial update can be made, when any segment within the given memory range is sealed. To measure the performance impact of this loop, two tests are developed. [8] The first is measuring the time taken for a particular system call, by using clock_gettime(CLOCK_MONOTONIC). The second is using PERF_COUNT_HW_REF_CPU_CYCLES (exclude user space). Both tests have similar results. The tests have roughly below sequence: for (i = 0; i < 1000, i++) create 1000 mappings (1 page per VMA) start the sampling for (j = 0; j < 1000, j++) mprotect one mapping stop and save the sample delete 1000 mappings calculates all samples. Below tests are performed on Intel(R) Pentium(R) Gold 7505 @ 2.00GHz, 4G memory, Chromebook. Based on the latest upstream code: The first test (measuring time) syscall__ vmas t t_mseal delta_ns per_vma % munmap__ 1 909 944 35 35 104% munmap__ 2 1398 1502 104 52 107% munmap__ 4 2444 2594 149 37 106% munmap__ 8 4029 4323 293 37 107% munmap__ 16 6647 6935 288 18 104% munmap__ 32 11811 12398 587 18 105% mprotect 1 439 465 26 26 106% mprotect 2 1659 1745 86 43 105% mprotect 4 3747 3889 142 36 104% mprotect 8 6755 6969 215 27 103% mprotect 16 13748 14144 396 25 103% mprotect 32 27827 28969 1142 36 104% madvise_ 1 240 262 22 22 109% madvise_ 2 366 442 76 38 121% madvise_ 4 623 751 128 32 121% madvise_ 8 1110 1324 215 27 119% madvise_ 16 2127 2451 324 20 115% madvise_ 32 4109 4642 534 17 113% The second test (measuring cpu cycle) syscall__ vmas cpu cmseal delta_cpu per_vma % munmap__ 1 1790 1890 100 100 106% munmap__ 2 2819 3033 214 107 108% munmap__ 4 4959 5271 312 78 106% munmap__ 8 8262 8745 483 60 106% munmap__ 16 13099 14116 1017 64 108% munmap__ 32 23221 24785 1565 49 107% mprotect 1 906 967 62 62 107% mprotect 2 3019 3203 184 92 106% mprotect 4 6149 6569 420 105 107% mprotect 8 9978 10524 545 68 105% mprotect 16 20448 21427 979 61 105% mprotect 32 40972 42935 1963 61 105% madvise_ 1 434 497 63 63 115% madvise_ 2 752 899 147 74 120% madvise_ 4 1313 1513 200 50 115% madvise_ 8 2271 2627 356 44 116% madvise_ 16 4312 4883 571 36 113% madvise_ 32 8376 9319 943 29 111% Based on the result, for 6.8 kernel, sealing check adds 20-40 nano seconds, or around 50-100 CPU cycles, per VMA. In addition, I applied the sealing to 5.10 kernel: The first test (measuring time) syscall__ vmas t tmseal delta_ns per_vma % munmap__ 1 357 390 33 33 109% munmap__ 2 442 463 21 11 105% munmap__ 4 614 634 20 5 103% munmap__ 8 1017 1137 120 15 112% munmap__ 16 1889 2153 263 16 114% munmap__ 32 4109 4088 -21 -1 99% mprotect 1 235 227 -7 -7 97% mprotect 2 495 464 -30 -15 94% mprotect 4 741 764 24 6 103% mprotect 8 1434 1437 2 0 100% mprotect 16 2958 2991 33 2 101% mprotect 32 6431 6608 177 6 103% madvise_ 1 191 208 16 16 109% madvise_ 2 300 324 24 12 108% madvise_ 4 450 473 23 6 105% madvise_ 8 753 806 53 7 107% madvise_ 16 1467 1592 125 8 108% madvise_ 32 2795 3405 610 19 122% The second test (measuring cpu cycle) syscall__ nbr_vma cpu cmseal delta_cpu per_vma % munmap__ 1 684 715 31 31 105% munmap__ 2 861 898 38 19 104% munmap__ 4 1183 1235 51 13 104% munmap__ 8 1999 2045 46 6 102% munmap__ 16 3839 3816 -23 -1 99% munmap__ 32 7672 7887 216 7 103% mprotect 1 397 443 46 46 112% mprotect 2 738 788 50 25 107% mprotect 4 1221 1256 35 9 103% mprotect 8 2356 2429 72 9 103% mprotect 16 4961 4935 -26 -2 99% mprotect 32 9882 10172 291 9 103% madvise_ 1 351 380 29 29 108% madvise_ 2 565 615 49 25 109% madvise_ 4 872 933 61 15 107% madvise_ 8 1508 1640 132 16 109% madvise_ 16 3078 3323 245 15 108% madvise_ 32 5893 6704 811 25 114% For 5.10 kernel, sealing check adds 0-15 ns in time, or 10-30 CPU cycles, there is even decrease in some cases. It might be interesting to compare 5.10 and 6.8 kernel The first test (measuring time) syscall__ vmas t_5_10 t_6_8 delta_ns per_vma % munmap__ 1 357 909 552 552 254% munmap__ 2 442 1398 956 478 316% munmap__ 4 614 2444 1830 458 398% munmap__ 8 1017 4029 3012 377 396% munmap__ 16 1889 6647 4758 297 352% munmap__ 32 4109 11811 7702 241 287% mprotect 1 235 439 204 204 187% mprotect 2 495 1659 1164 582 335% mprotect 4 741 3747 3006 752 506% mprotect 8 1434 6755 5320 665 471% mprotect 16 2958 13748 10790 674 465% mprotect 32 6431 27827 21397 669 433% madvise_ 1 191 240 49 49 125% madvise_ 2 300 366 67 33 122% madvise_ 4 450 623 173 43 138% madvise_ 8 753 1110 357 45 147% madvise_ 16 1467 2127 660 41 145% madvise_ 32 2795 4109 1314 41 147% The second test (measuring cpu cycle) syscall__ vmas cpu_5_10 c_6_8 delta_cpu per_vma % munmap__ 1 684 1790 1106 1106 262% munmap__ 2 861 2819 1958 979 327% munmap__ 4 1183 4959 3776 944 419% munmap__ 8 1999 8262 6263 783 413% munmap__ 16 3839 13099 9260 579 341% munmap__ 32 7672 23221 15549 486 303% mprotect 1 397 906 509 509 228% mprotect 2 738 3019 2281 1140 409% mprotect 4 1221 6149 4929 1232 504% mprotect 8 2356 9978 7622 953 423% mprotect 16 4961 20448 15487 968 412% mprotect 32 9882 40972 31091 972 415% madvise_ 1 351 434 82 82 123% madvise_ 2 565 752 186 93 133% madvise_ 4 872 1313 442 110 151% madvise_ 8 1508 2271 763 95 151% madvise_ 16 3078 4312 1234 77 140% madvise_ 32 5893 8376 2483 78 142% From 5.10 to 6.8 munmap: added 250-550 ns in time, or 500-1100 in cpu cycle, per vma. mprotect: added 200-750 ns in time, or 500-1200 in cpu cycle, per vma. madvise: added 33-50 ns in time, or 70-110 in cpu cycle, per vma. In comparison to mseal, which adds 20-40 ns or 50-100 CPU cycles, the increase from 5.10 to 6.8 is significantly larger, approximately ten times greater for munmap and mprotect. When I discuss the mm performance with Brian Makin, an engineer who worked on performance, it was brought to my attention that such performance benchmarks, which measuring millions of mm syscall in a tight loop, may not accurately reflect real-world scenarios, such as that of a database service. Also this is tested using a single HW and ChromeOS, the data from another HW or distribution might be different. It might be best to take this data with a grain of salt. This patch (of 5): Wire up mseal syscall for all architectures. Link: https://lkml.kernel.org/r/20240415163527.626541-1-jeffxu@chromium.org Link: https://lkml.kernel.org/r/20240415163527.626541-2-jeffxu@chromium.org Signed-off-by: Jeff Xu <jeffxu@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jann Horn <jannh@google.com> [Bug #2] Cc: Jeff Xu <jeffxu@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jorge Lucangeli Obes <jorgelo@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: Stephen Röttger <sroettger@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Amer Al Shanawany <amer.shanawany@gmail.com> Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-21Merge tag 'm68knommu-for-v6.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu update from Greg Ungerer: . remove use of kernel config option from uapi header * tag 'm68knommu-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Avoid CONFIG_COLDFIRE switch in uapi header
2024-05-21Merge tag 'asm-generic-6.10' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "These are a few cross-architecture cleanup patches: - separate out fbdev support from the asm/video.h contents that may be used by either the old fbdev drivers or the newer drm display code (Thomas Zimmermann) - cleanups for the generic bitops code and asm-generic/bug.h (Thorsten Blum) - remove the orphaned include/asm-generic/page.h header that used to be included by long-removed mmu-less architectures (me)" * tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: Fix name collision with ACPI's video.o bug: Improve comment asm-generic: remove unused asm-generic/page.h arch: Rename fbdev header and source files arch: Remove struct fb_info from video helpers arch: Select fbdev helpers with CONFIG_VIDEO bitops: Change function return types from long to int
2024-05-15Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds1-0/+2
Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ...
2024-05-08m68k: defconfig: Update defconfigs for v6.9-rc1Geert Uytterhoeven12-36/+12
- Enable trimming of unused exported kernel symbols, - Drop CONFIG_IP_NF_ARPTABLES=m (auto-enabled since commit 4654467dc7e111e8 ("netfilter: arptables: allow xtables-nft only builds")), - Drop CONFIG_STRING_SELFTEST=m (replaced by auto-modular CONFIG_STRING_KUNIT_TEST in commit 29d8568849fe5937 ("string: Convert selftest to KUnit")), - Drop CONFIG_TEST_STRING_HELPERS=m (replaced by auto-modular CONFIG_STRING_HELPERS_KUNIT_TEST in commit fb57550fcbd86839 ("string: Convert helpers selftest to KUnit")). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/e17b3ac60832a3ff92d25d1a05bf814e8f15d0c5.1711475325.git.geert@linux-m68k.org
2024-05-08m68k: Move ARCH_HAS_CPU_CACHE_ALIASINGGeert Uytterhoeven1-1/+1
Move the recently added ARCH_HAS_CPU_CACHE_ALIASING to restore alphabetical sort order. Fixes: 8690bbcf3b7010b3 ("Introduce cpu_dcache_is_aliasing() across all architectures") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/r/4574ad6cc1117e4b5d29812c165bf7f6e5b60773.1714978406.git.geert@linux-m68k.org
2024-05-08m68k: mac: Fix reboot hang on Mac IIciFinn Thain1-18/+18
Calling mac_reset() on a Mac IIci does reset the system, but what follows is a POST failure that requires a manual reset to resolve. Avoid that by using the 68030 asm implementation instead of the C implementation. Apparently the SE/30 has a similar problem as it has used the asm implementation since before git. This patch extends that solution to other systems with a similar ROM. After this patch, the only systems still using the C implementation are 68040 systems where adb_type is either MAC_ADB_IOP or MAC_ADB_II. This implies a 1 MiB Quadra ROM. This now includes the Quadra 900/950, which previously fell through to the "should never get here" catch-all. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/480ebd1249d229c6dc1f3f1c6d599b8505483fd8.1714797072.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-05-08m68k: Fix spinlock race in kernel thread creationMichael Schmitz1-1/+3
Context switching does take care to retain the correct lock owner across the switch from 'prev' to 'next' tasks. This does rely on interrupts remaining disabled for the entire duration of the switch. This condition is guaranteed for normal process creation and context switching between already running processes, because both 'prev' and 'next' already have interrupts disabled in their saved copies of the status register. The situation is different for newly created kernel threads. The status register is set to PS_S in copy_thread(), which does leave the IPL at 0. Upon restoring the 'next' thread's status register in switch_to() aka resume(), interrupts then become enabled prematurely. resume() then returns via ret_from_kernel_thread() and schedule_tail() where run queue lock is released (see finish_task_switch() and finish_lock_switch()). A timer interrupt calling scheduler_tick() before the lock is released in finish_task_switch() will find the lock already taken, with the current task as lock owner. This causes a spinlock recursion warning as reported by Guenter Roeck. As far as I can ascertain, this race has been opened in commit 533e6903bea0 ("m68k: split ret_from_fork(), simplify kernel_thread()") but I haven't done a detailed study of kernel history so it may well predate that commit. Interrupts cannot be disabled in the saved status register copy for kernel threads (init will complain about interrupts disabled when finally starting user space). Disable interrupts temporarily when switching the tasks' register sets in resume(). Note that a simple oriw 0x700,%sr after restoring sr is not enough here - this leaves enough of a race for the 'spinlock recursion' warning to still be observed. Tested on ARAnyM and qemu (Quadra 800 emulation). Fixes: 533e6903bea0 ("m68k: split ret_from_fork(), simplify kernel_thread()") Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/all/07811b26-677c-4d05-aeb4-996cd880b789@roeck-us.net Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20240411033631.16335-1-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-05-08m68k: Let GENERIC_IOMAP depend on HAS_IOPORTNiklas Schnelle1-1/+1
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. With that choosing dynamically between I/O port and MMIO access via GNERIC_IOMAP will not work. So only select GENERIC_IOMAP when HAS_IOPORT is selected. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20240403122851.38808-2-schnelle@linux.ibm.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-05-07m68k: Avoid CONFIG_COLDFIRE switch in uapi headerThomas Huth1-1/+1
We should not use any CONFIG switches in uapi headers since these only work during kernel compilation. They are not defined for userspace. Let's use the __mcoldfire__ switch from the compiler here instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2024-05-03arch: Rename fbdev header and source filesThomas Zimmermann1-4/+4
The per-architecture fbdev code has no dependencies on fbdev and can be used for any video-related subsystem. Rename the files to 'video'. Use video-sti.c on parisc as the source file depends on CONFIG_STI_CORE. On arc, arm, arm64, sh, and um the asm header file is an empty wrapper around the file in asm-generic. Let Kbuild generate the file. The build system does this automatically. Only um needs to generate video.h explicitly, so that it overrides the host architecture's header. The latter would otherwise interfere with the build. Further update all includes statements, include guards, and Makefiles. Also update a few strings and comments to refer to video instead of fbdev. v3: - arc, arm, arm64, sh: generate asm header via build system (Sam, Helge, Arnd) - um: rename fb.h to video.h - fix typo in commit message (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-04-29m68k: amiga: Use str_plural() to fix Coccinelle warningThorsten Blum1-1/+1
Fixes the following Coccinelle/coccicheck warning reported by string_choices.cocci: opportunity for str_plural(zorro_num_autocon) Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20240412215704.204403-4-thorsten.blum@toblux.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-04-05Merge tag 'drm-misc-next-2024-03-28' of ↵Dave Airlie1-0/+2
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Two misc-next in one. drm-misc-next for v6.10-rc1: The deal of a lifetime! You get ALL of the previous drm-misc-next-2024-03-21-1 tag!! But WAIT, there's MORE! Cross-subsystem Changes: - Assorted DT binding updates. Core Changes: - Clarify how optional wait_hpd_asserted is. - Shuffle Kconfig names around. Driver Changes: - Assorted build fixes for panthor, imagination, - Add AUO B120XAN01.0 panels. - Assorted small fixes to panthor, panfrost. drm-misc-next for v6.10: UAPI Changes: - Move some nouveau magic constants to uapi. Cross-subsystem Changes: - Move drm-misc to gitlab and freedesktop hosting. - Add entries for panfrost. Core Changes: - Improve placement for TTM bo's in idle/busy handling. - Improve drm/bridge init ordering. - Add CONFIG_DRM_WERROR, and use W=1 for drm. - Assorted documentation updates. - Make more (drm and driver) headers self-contained and add header guards. - Grab reservation lock in pin/unpin callbacks. - Fix reservation lock handling for vmap. - Add edp and edid panel matching, use it to fix a nearly identical panel. Driver Changes: - Add drm/panthor driver and assorted fixes. - Assorted small fixes to xlnx, panel-edp, tidss, ci, nouveau, panel and bridge drivers. - Add Samsung s6e3fa7, BOE NT116WHM-N44, CMN N116BCA-EA1, CrystalClear CMT430B19N00, Startek KD050HDFIA020-C020A, powertip PH128800T006-ZHC01 panels. - Fix console for omapdrm. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bea310a6-6ff6-477e-9363-f9f053cfd12a@linux.intel.com
2024-04-02m68k: Calculate THREAD_SIZE from THREAD_SIZE_ORDERDawei Li1-4/+5
Current THREAD_SIZE_ORDER implementation is not generic. Improve it by: - Defining THREAD_SIZE_ORDER based on the specific platform config, - Calculating THREAD_SIZE from THREAD_SIZE_ORDER. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dawei Li <dawei.li@shingroup.cn> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20240304085455.125063-1-dawei.li@shingroup.cn Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2024-03-21Merge tag 'tty-6.9-rc1' of ↵Linus Torvalds2-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY/Serial driver updates and cleanups for 6.9-rc1. Included in here are: - more tty cleanups from Jiri - loads of 8250 driver cleanups from Andy - max310x driver updates - samsung serial driver updates - uart_prepare_sysrq_char() updates for many drivers - platform driver remove callback void cleanups - stm32 driver updates - other small tty/serial driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) dt-bindings: serial: stm32: add power-domains property serial: 8250_dw: Replace ACPI device check by a quirk serial: Lock console when calling into driver before registration serial: 8250_uniphier: Switch to use uart_read_port_properties() serial: 8250_tegra: Switch to use uart_read_port_properties() serial: 8250_pxa: Switch to use uart_read_port_properties() serial: 8250_omap: Switch to use uart_read_port_properties() serial: 8250_of: Switch to use uart_read_port_properties() serial: 8250_lpc18xx: Switch to use uart_read_port_properties() serial: 8250_ingenic: Switch to use uart_read_port_properties() serial: 8250_dw: Switch to use uart_read_port_properties() serial: 8250_bcm7271: Switch to use uart_read_port_properties() serial: 8250_bcm2835aux: Switch to use uart_read_port_properties() serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties() serial: port: Introduce a common helper to read properties serial: core: Add UPIO_UNKNOWN constant for unknown port type serial: core: Move struct uart_port::quirks closer to possible values serial: sh-sci: Call sci_serial_{in,out}() directly serial: core: only stop transmit when HW fifo is empty serial: pch: Use uart_prepare_sysrq_char(). ...
2024-03-15Merge tag 'mm-stable-2024-03-13-20-04' of ↵Linus Torvalds2-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames from hotplugged memory rather than only from main memory. Series "implement "memmap on memory" feature on s390". - More folio conversions from Matthew Wilcox in the series "Convert memcontrol charge moving to use folios" "mm: convert mm counter to take a folio" - Chengming Zhou has optimized zswap's rbtree locking, providing significant reductions in system time and modest but measurable reductions in overall runtimes. The series is "mm/zswap: optimize the scalability of zswap rb-tree". - Chengming Zhou has also provided the series "mm/zswap: optimize zswap lru list" which provides measurable runtime benefits in some swap-intensive situations. - And Chengming Zhou further optimizes zswap in the series "mm/zswap: optimize for dynamic zswap_pools". Measured improvements are modest. - zswap cleanups and simplifications from Yosry Ahmed in the series "mm: zswap: simplify zswap_swapoff()". - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has contributed several DAX cleanups as well as adding a sysfs tunable to control the memmap_on_memory setting when the dax device is hotplugged as system memory. - Johannes Weiner has added the large series "mm: zswap: cleanups", which does that. - More DAMON work from SeongJae Park in the series "mm/damon: make DAMON debugfs interface deprecation unignorable" "selftests/damon: add more tests for core functionalities and corner cases" "Docs/mm/damon: misc readability improvements" "mm/damon: let DAMOS feeds and tame/auto-tune itself" - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs extension" Rakie Kim has developed a new mempolicy interleaving policy wherein we allocate memory across nodes in a weighted fashion rather than uniformly. This is beneficial in heterogeneous memory environments appearing with CXL. - Christophe Leroy has contributed some cleanup and consolidation work against the ARM pagetable dumping code in the series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute". - Luis Chamberlain has added some additional xarray selftesting in the series "test_xarray: advanced API multi-index tests". - Muhammad Usama Anjum has reworked the selftest code to make its human-readable output conform to the TAP ("Test Anything Protocol") format. Amongst other things, this opens up the use of third-party tools to parse and process out selftesting results. - Ryan Roberts has added fork()-time PTE batching of THP ptes in the series "mm/memory: optimize fork() with PTE-mapped THP". Mainly targeted at arm64, this significantly speeds up fork() when the process has a large number of pte-mapped folios. - David Hildenbrand also gets in on the THP pte batching game in his series "mm/memory: optimize unmap/zap with PTE-mapped THP". It implements batching during munmap() and other pte teardown situations. The microbenchmark improvements are nice. - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte mappings"). Kernel build times on arm64 improved nicely. Ryan's series "Address some contpte nits" provides some followup work. - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has fixed an obscure hugetlb race which was causing unnecessary page faults. He has also added a reproducer under the selftest code. - In the series "selftests/mm: Output cleanups for the compaction test", Mark Brown did what the title claims. - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring". - Even more zswap material from Nhat Pham. The series "fix and extend zswap kselftests" does as claimed. - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in our handling of DAX on archiecctures which have virtually aliasing data caches. The arm architecture is the main beneficiary. - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic improvements in worst-case mmap_lock hold times during certain userfaultfd operations. - Some page_owner enhancements and maintenance work from Oscar Salvador in his series "page_owner: print stacks and their outstanding allocations" "page_owner: Fixup and cleanup" - Uladzislau Rezki has contributed some vmalloc scalability improvements in his series "Mitigate a vmap lock contention". It realizes a 12x improvement for a certain microbenchmark. - Some kexec/crash cleanup work from Baoquan He in the series "Split crash out from kexec and clean up related config items". - Some zsmalloc maintenance work from Chengming Zhou in the series "mm/zsmalloc: fix and optimize objects/page migration" "mm/zsmalloc: some cleanup for get/set_zspage_mapping()" - Zi Yan has taught the MM to perform compaction on folios larger than order=0. This a step along the path to implementaton of the merging of large anonymous folios. The series is named "Enable >0 order folio memory compaction". - Christoph Hellwig has done quite a lot of cleanup work in the pagecache writeback code in his series "convert write_cache_pages() to an iterator". - Some modest hugetlb cleanups and speedups in Vishal Moola's series "Handle hugetlb faults under the VMA lock". - Zi Yan has changed the page splitting code so we can split huge pages into sizes other than order-0 to better utilize large folios. The series is named "Split a folio to any lower order folios". - David Hildenbrand has contributed the series "mm: remove total_mapcount()", a cleanup. - Matthew Wilcox has sought to improve the performance of bulk memory freeing in his series "Rearrange batched folio freeing". - Gang Li's series "hugetlb: parallelize hugetlb page init on boot" provides large improvements in bootup times on large machines which are configured to use large numbers of hugetlb pages. - Matthew Wilcox's series "PageFlags cleanups" does that. - Qi Zheng's series "minor fixes and supplement for ptdesc" does that also. S390 is affected. - Cleanups to our pagemap utility functions from Peter Xu in his series "mm/treewide: Replace pXd_large() with pXd_leaf()". - Nico Pache has fixed a few things with our hugepage selftests in his series "selftests/mm: Improve Hugepage Test Handling in MM Selftests". - Also, of course, many singleton patches to many things. Please see the individual changelogs for details. * tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits) mm/zswap: remove the memcpy if acomp is not sleepable crypto: introduce: acomp_is_async to expose if comp drivers might sleep memtest: use {READ,WRITE}_ONCE in memory scanning mm: prohibit the last subpage from reusing the entire large folio mm: recover pud_leaf() definitions in nopmd case selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements selftests/mm: skip uffd hugetlb tests with insufficient hugepages selftests/mm: dont fail testsuite due to a lack of hugepages mm/huge_memory: skip invalid debugfs new_order input for folio split mm/huge_memory: check new folio order when split a folio mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure mm: add an explicit smp_wmb() to UFFDIO_CONTINUE mm: fix list corruption in put_pages_list mm: remove folio from deferred split list before uncharging it filemap: avoid unnecessary major faults in filemap_fault() mm,page_owner: drop unnecessary check mm,page_owner: check for null stack_record before bumping its refcount mm: swap: fix race between free_swap_and_cache() and swapoff() mm/treewide: align up pXd_leaf() retval across archs mm/treewide: drop pXd_large() ...
2024-03-12Merge tag 'asm-generic-6.9' of ↵Linus Torvalds3-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Just two small updates this time: - A series I did to unify the definition of PAGE_SIZE through Kconfig, intended to help with a vdso rework that needs the constant but cannot include the normal kernel headers when building the compat VDSO on arm64 and potentially others - a patch from Yan Zhao to remove the pfn_to_virt() definitions from a couple of architectures after finding they were both incorrect and entirely unused" * tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: define CONFIG_PAGE_SIZE_*KB on all architectures arch: simplify architecture specific page size configuration arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
2024-03-12Merge tag 'm68k-for-v6.9-tag1' of ↵Linus Torvalds12-36/+0
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Make the Zorro bus type constant - defconfig updates * tag 'm68k-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: defconfig: Update defconfigs for v6.8-rc1 zorro: Make zorro_bus_type const
2024-03-11Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linuxLinus Torvalds1-3/+7
Pull block updates from Jens Axboe: - MD pull requests via Song: - Cleanup redundant checks (Yu Kuai) - Remove deprecated headers (Marc Zyngier, Song Liu) - Concurrency fixes (Li Lingfeng) - Memory leak fix (Li Nan) - Refactor raid1 read_balance (Yu Kuai, Paul Luse) - Clean up and fix for md_ioctl (Li Nan) - Other small fixes (Gui-Dong Han, Heming Zhao) - MD atomic limits (Christoph) - NVMe pull request via Keith: - RDMA target enhancements (Max) - Fabrics fixes (Max, Guixin, Hannes) - Atomic queue_limits usage (Christoph) - Const use for class_register (Ricardo) - Identification error handling fixes (Shin'ichiro, Keith) - Improvement and cleanup for cached request handling (Christoph) - Moving towards atomic queue limits. Core changes and driver bits so far (Christoph) - Fix UAF issues in aoeblk (Chun-Yi) - Zoned fix and cleanups (Damien) - s390 dasd cleanups and fixes (Jan, Miroslav) - Block issue timestamp caching (me) - noio scope guarding for zoned IO (Johannes) - block/nvme PI improvements (Kanchan) - Ability to terminate long running discard loop (Keith) - bdev revalidation fix (Li) - Get rid of old nr_queues hack for kdump kernels (Ming) - Support for async deletion of ublk (Ming) - Improve IRQ bio recycling (Pavel) - Factor in CPU capacity for remote vs local completion (Qais) - Add shared_tags configfs entry for null_blk (Shin'ichiro - Fix for a regression in page refcounts introduced by the folio unification (Tony) - Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid, Ricardo, Roman, Tang, Uwe) * tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits) block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC block/swim: Convert to platform remove callback returning void cdrom: gdrom: Convert to platform remove callback returning void block: remove disk_stack_limits md: remove mddev->queue md: don't initialize queue limits md/raid10: use the atomic queue limit update APIs md/raid5: use the atomic queue limit update APIs md/raid1: use the atomic queue limit update APIs md/raid0: use the atomic queue limit update APIs md: add queue limit helpers md: add a mddev_is_dm helper md: add a mddev_add_trace_msg helper md: add a mddev_trace_remap helper bcache: move calculation of stripe_size and io_opt into bcache_device_init virtio_blk: Do not use disk_set_max_open/active_zones() aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts block: move capacity validation to blkpg_do_ioctl() block: prevent division by zero in blk_rq_stat_sum() drbd: atomically update queue limits in drbd_reconsider_queue_parameters ...
2024-03-11m68k: pgtable: Add missing #include <asm/page.h>Geert Uytterhoeven1-0/+2
When just including <linux/pgtable.h>: include/asm-generic/pgtable-nop4d.h:9:18: error: unknown type name ‘pgd_t’ 9 | typedef struct { pgd_t pgd; } p4d_t; | ^~~~~ Make <asm/pgtable.h> self-contained by including <asm/page.h>. Reported-by: Jani Nikula <jani.nikula@intel.com> Closes: https://lore.kernel.org/r/878r2uxwha.fsf@intel.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/af9e22b878f59223adb593f5bbd5b61432120010.1709898638.git.jani.nikula@intel.com
2024-03-06arch: define CONFIG_PAGE_SIZE_*KB on all architecturesArnd Bergmann3-5/+6
Most architectures only support a single hardcoded page size. In order to ensure that each one of these sets the corresponding Kconfig symbols, change over the PAGE_SHIFT definition to the common one and allow only the hardware page size to be selected. Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Stafford Horne <shorne@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-23Introduce cpu_dcache_is_aliasing() across all architecturesMathieu Desnoyers2-0/+10
Introduce a generic way to query whether the data cache is virtually aliased on all architectures. Its purpose is to ensure that subsystems which are incompatible with virtually aliased data caches (e.g. FS_DAX) can reliably query this. For data cache aliasing, there are three scenarios dependending on the architecture. Here is a breakdown based on my understanding: A) The data cache is always aliasing: * arc * csky * m68k (note: shared memory mappings are incoherent ? SHMLBA is missing there.) * sh * parisc B) The data cache aliasing is statically known or depends on querying CPU state at runtime: * arm (cache_is_vivt() || cache_is_vipt_aliasing()) * mips (cpu_has_dc_aliases) * nios2 (NIOS2_DCACHE_SIZE > PAGE_SIZE) * sparc32 (vac_cache_size > PAGE_SIZE) * sparc64 (L1DCACHE_SIZE > PAGE_SIZE) * xtensa (DCACHE_WAY_SIZE > PAGE_SIZE) C) The data cache is never aliasing: * alpha * arm64 (aarch64) * hexagon * loongarch (but with incoherent write buffers, which are disabled since commit d23b7795 ("LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE")) * microblaze * openrisc * powerpc * riscv * s390 * um * x86 Require architectures in A) and B) to select ARCH_HAS_CPU_CACHE_ALIASING and implement "cpu_dcache_is_aliasing()". Architectures in C) don't select ARCH_HAS_CPU_CACHE_ALIASING, and thus cpu_dcache_is_aliasing() simply evaluates to "false". Note that this leaves "cpu_icache_is_aliasing()" to be implemented as future work. This would be useful to gate features like XIP on architectures which have aliasing CPU dcache-icache but not CPU dcache-dcache. Use "cpu_dcache" and "cpu_cache" rather than just "dcache" and "cache" to clarify that we really mean "CPU data cache" and "CPU cache" to eliminate any possible confusion with VFS "dentry cache" and "page cache". Link: https://lore.kernel.org/lkml/20030910210416.GA24258@mail.jlokier.co.uk/ Link: https://lkml.kernel.org/r/20240215144633.96437-9-mathieu.desnoyers@efficios.com Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@armlinux.org.uk> Cc: Alasdair Kergon <agk@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: kernel test robot <lkp@intel.com> Cc: Michael Sclafani <dm-devel@lists.linux.dev> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-20nfblock: pass queue_limits to blk_mq_alloc_diskChristoph Hellwig1-2/+4
Pass the queue limits directly to blk_alloc_disk instead of setting them one at a time. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20240215071055.2201424-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-20block: pass a queue_limits argument to blk_alloc_diskChristoph Hellwig1-2/+4
Pass a queue_limits to blk_alloc_disk and apply it if non-NULL. This will allow allocating queues with valid queue limits instead of setting the values one at a time later. Also change blk_alloc_disk to return an ERR_PTR instead of just NULL which can't distinguish errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20240215071055.2201424-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-19m68k: defconfig: Update defconfigs for v6.8-rc1Geert Uytterhoeven12-36/+0
- Drop CONFIG_MD_LINEAR=m (removed in commit 849d18e27be9a125 ("md: Remove deprecated CONFIG_MD_LINEAR")), - Drop CONFIG_CRYPTO_CFB=m and CONFIG_CRYPTO_OFB=m (removed in commit 412ac51ce0b8c558 ("crypto: cfb,ofb - Remove cfb and ofb")). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/902a6cfd5f0c5b67470658dd6dffdd1bac1948b5.1706272008.git.geert@linux-m68k.org
2024-02-19Merge 6.8-rc5 into tty-nextGreg Kroah-Hartman1-2/+2
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-15kbuild: use 4-space indentation when followed by conditionalsMasahiro Yamada1-2/+2
GNU Make manual [1] clearly forbids a tab at the beginning of the conditional directive line: "Extra spaces are allowed and ignored at the beginning of the conditional directive line, but a tab is not allowed." This will not work for the next release of GNU Make, hence commit 82175d1f9430 ("kbuild: Replace tabs with spaces when followed by conditionals") replaced the inappropriate tabs with 8 spaces. However, the 8-space indentation cannot be visually distinguished. Linus suggested 2-4 spaces for those nested if-statements. [2] This commit redoes the replacement with 4 spaces. [1]: https://www.gnu.org/software/make/manual/make.html#Conditional-Syntax [2]: https://lore.kernel.org/all/CAHk-=whJKZNZWsa-VNDKafS_VfY4a5dAjG-r8BZgWk_a-xSepw@mail.gmail.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-02-04Merge 6.8-rc3 into tty-nextGreg Kroah-Hartman1-2/+2
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-31kbuild: Replace tabs with spaces when followed by conditionalsDmitry Goncharov1-2/+2
This is needed for the future (post make-4.4.1) versions of gnu make. Starting from https://git.savannah.gnu.org/cgit/make.git/commit/?id=07fcee35f058a876447c8a021f9eb1943f902534 gnu make won't allow conditionals to follow recipe prefix. For example there is a tab followed by ifeq on line 324 in the root Makefile. With the new make this conditional causes the following $ make cpu.o /home/dgoncharov/src/linux-kbuild/Makefile:2063: *** missing 'endif'. Stop. make: *** [Makefile:240: __sub-make] Error 2 This patch replaces tabs followed by conditionals with 8 spaces. See https://savannah.gnu.org/bugs/?64185 and https://savannah.gnu.org/bugs/?64259 for details. Signed-off-by: Dmitry Goncharov <dgoncharov@users.sf.net> Reported-by: Martin Dorey <martin.dorey@hitachivantara.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-01-28vt: remove superfluous CONFIG_HW_CONSOLELukas Bulwahn1-1/+1
The config HW_CONSOLE is always identical to the config VT and is not visible in the kernel's build menuconfig. So, CONFIG_HW_CONSOLE is redundant. Replace all references to CONFIG_HW_CONSOLE with CONFIG_VT and remove CONFIG_HW_CONSOLE. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20240108134102.601-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-28serial: 8250: Move hp300_setup_serial_console() to <linux/serial_8250.h>Geert Uytterhoeven1-5/+1
If CONFIG_SERIAL_8250_HP300=y and CONFIG_SERIAL_8250_CONSOLE=y (e.g. m68k/allyesconfig): drivers/tty/serial/8250/8250_hp300.c:91:12: error: no previous prototype for ‘hp300_setup_serial_console’ [-Werror=missing-prototypes] 91 | int __init hp300_setup_serial_console(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by moving the existing prototype in arch/m68k/hp300/config.c to <linux/serial_8250.h>, so it is visible to both caller and implementor. While at it, provide a dummy in case CONFIG_SERIAL_8250_CONSOLE is not enabled, to reduce #ifdef clutter in the caller. Exposed by commit 0fcb70851fbfea17 ("Makefile.extrawarn: turn on missing-prototypes globally"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/c17469f8e47b2ef49234a85a7a14882ddf374e41.1704892597.git.geert@linux-m68k.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 15:56:50 +0300