summaryrefslogtreecommitdiff
path: root/arch/arm64/configs
AgeCommit message (Collapse)AuthorFilesLines
2025-06-03Merge tag 'mfd-next-6.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Samsung Exynos ACPM: - Populate child platform devices from device tree data - Introduce a new API, 'devm_acpm_get_by_node()', for child devices to get the ACPM handle ROHM PMICs: - Add support for the ROHM BD96802 scalable companion PMIC to the BD96801 core driver - Add support for controlling the BD96802 using the BD96801 regulator driver - Add support to the BD96805, which is almost identical to the BD96801 - Add support to the BD96806, which is similar to the BD96802 Maxim MAX77759: - Add a core driver for the MAX77759 companion PMIC - Add a GPIO driver for the expander functions on the MAX77759 - Add an NVMEM driver to expose the non-volatile memory on the MAX77759 STMicroelectronics STM32MP25: - Add support for the STM32MP25 SoC to the stm32-lptimer - Add support for the STM32MP25 to the clocksource driver, handling new register access requirements - Add support for the STM32MP25 to the PWM driver, enabling up to two PWM outputs Broadcom BCM590xx: - Add support for the BCM59054 PMU - Parse the PMU ID and revision to support behavioral differences between chip revisions - Add regulator support for the BCM59054 Samsung S2MPG10: - Add support for the S2MPG10 PMIC, which communicates via the Samsung ACPM firmware instead of I2C Exynos ACPM: - Improve timeout detection reliability by using ktime APIs instead of a loop counter assumption - Allow PMIC access during late system shutdown by switching to 'udelay()' instead of a sleeping function - Fix an issue where reading command results longer than 8 bytes would fail - Silence non-error '-EPROBE_DEFER' messages during boot to clean up logs Exynos LPASS: - Fix an error handling path by switching to 'devm_regmap_init_mmio()' to prevent resource leaks - Fix a bug where 'exynos_lpass_disable()' was called twice in the remove function - Fix another resource leak in the probe's error path by using 'devm_add_action_or_reset()' Samsung SEC: - Handle the s2dos05, which does not have IRQ support, explicitly to prevent warnings - Fix the core driver to correctly handle errors from 'sec_irq_init()' instead of ignoring them STMPE-SPI: - Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro MAINTAINERS: - Adjust a file path for the Siemens IPC LED drivers entry to fix a broken reference Maxim Drivers: - Correct the spelling of "Electronics" in Samsung copyright headers across multiple files General: - Fix wakeup source memory leaks on device unbind for 88pm886, as3722, max14577, max77541, max77705, max8925, rt5033, and sprd-sc27xx drivers Samsung SEC Drivers: - Split the driver into a transport-agnostic core ('sec-core') and transport-specific ('sec-i2c', 'sec-acpm') modules to support non-I2C devices - Merge the 'sec-core' and 'sec-irq' modules to reduce memory consumption - Move internal APIs to a private header to clean up the public API - Improve code style by sorting includes, cleaning up headers, sorting device tables, and using helper macros like 'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG' - Make regmap configuration for s2dos05/s2mpu05 explicit to improve clarity - Rework platform data and regmap instantiation to use OF match data instead of a large switch statement ROHM BD96801/2: - Prepare the driver for new models by separating chip-specific data into its own structure - Drop IC name prefix from IRQ resource names in both the MFD and regulator drivers for simplification Broadcom BCM590xx: - Refactor the regulator driver to store descriptions in a table to ease support for new chips - Rename BCM59056-specific data to prepare for the addition of other regulators - Use 'dev_err_probe()' for cleaner error handling Exynos ACPM: - Correct kerneldoc warnings and use the conventional 'np' argument name General MFD: - Convert 'aat2870' and 'tps65010' to use the per-client debugfs directory provided by the I2C core - Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line value setter callbacks - Constify 'regmap_irq_chip' and other structures in '88pm886' to move data to read-only sections BCM590xx: - Drop the unused "id" member from the 'bcm590xx' struct in preparation for a replacement Samsung SEC Core: - Remove forward declarations for functions that no longer exist SM501: - Remove the unused 'sm501_find_clock()' function New Compatibles: - Google: Add a PMIC child node to the 'google,gs101-acpm-ipc' binding - ROHM: Add new bindings for 'rohm,bd96802-regulator' and 'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806 - Maxim: Add new bindings for 'maxim,max77759-gpio', 'maxim,max77759-nvmem', and the top-level 'maxim,max77759' - STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding - Broadcom: Add 'bcm59054' compatible - Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and 'microchip,sama7d65-secumod' compatibles - Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD binding - MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc', and 'mt8365-infracfg-nao' - Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic' syscon compatibles Refactoring & Cleanup: - Convert Broadcom BCM59056 devicetree bindings to YAML and split them into MFD and regulator parts - Convert the Microchip AT91 secumod binding to YAML - Drop unrelated consumer nodes from binding examples to reduce bloat - Correct indentation and style in various DTS examples" * tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits) mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers mfd: maxim: Correct Samsung "Electronics" spelling in headers mfd: sm501: Remove unused sm501_find_clock mfd: 88pm886: Constify struct regmap_irq_chip and some other structures dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind mfd: rt5033: Fix wakeup source leaks on device unbind mfd: max8925: Fix wakeup source leaks on device unbind mfd: max77705: Fix wakeup source leaks on device unbind mfd: max77541: Fix wakeup source leaks on device unbind mfd: max14577: Fix wakeup source leaks on device unbind mfd: as3722: Fix wakeup source leaks on device unbind mfd: 88pm886: Fix wakeup source leaks on device unbind dt-bindings: mfd: Correct indentation and style in DTS example dt-bindings: mfd: Drop unrelated nodes from DTS example dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE dt-bindings: mfd: syscon: Add mt7988-topmisc mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe() ...
2025-05-31Merge tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+2
Pull SoC devicetree updates from Arnd Bergmann: "There are 11 newly supported SoCs, but these are all either new variants of existing designs, or straight reuses of the existing chip in a new package: - RK3562 is a new chip based on the old Cortex-A53 core, apparently a low-cost version of the Cortex-A55 based RK3568/RK3566. - NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different set of on-chip peripherals. - Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2 family - Amlogic S6/S7/S7D - Samsung Exynos7870 is an older chip similar to Exynos7885 - WonderMedia wm8950 is a minor variation on the wm8850 chip - Amlogic s805y is almost idential to s805x - Allwinner A523 is similar to A527 and T527 - Qualcomm MSM8926 is a variant of MSM8226 - Qualcomm Snapdragon X1P42100 is related to R1E80100 There are also 65 boards, including reference designs for the chips above, this includes - 12 new boards based on TI K3 series chips, most of them from Toradex - 10 devices using Rockchips RK35xx and PX30 chips - 2 phones and 2 laptops based on Qualcomm Snapdragon designs - 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses - 3 Samsung Galaxy phones based on Exynos7870 - 5 Allwinner based boards using a variety of ARMv8 chips - 9 32-bit machines, each based on a different SoC family Aside from the new hardware, there is the usual set of cleanups and newly added hardware support on existing machines, for a total of 965 devicetree changesets" * tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits) MAINTAINERS, mailmap: update Sven Peter's email address arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency arm64: dts: nuvoton: Add pinctrl ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings arm64: dts: blaize-blzp1600: Enable GPIO support dt-bindings: clock: socfpga: convert to yaml arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3562 pcie unit addresses arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3576 pcie unit addresses arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588 arm64: dts: rockchip: Add missing SFC power-domains to rk3576 Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0" arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes arm64: dts: mt6359: Rename RTC node to match binding expectations arm64: dts: mt8365-evk: Add goodix touchscreen support arm64: dts: mediatek: mt8188: Add missing #reset-cells property arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board ...
2025-05-31Merge tag 'soc-defconfig-6.16' of ↵Linus Torvalds1-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "The usual defconfig updates enable configuration options for drivers that got added. A few SoC specific options are enabled in Kconfig files instead, in place of the defconfig files" * tag 'soc-defconfig-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: defconfig: enable ACPM protocol and Exynos mailbox arm64: defconfig: Enable configs for MediaTek Genio EVK boards arm64: defconfig: mediatek: enable PHY drivers arm64: defconfig: Enable Rockchip SAI and ES8328 arm64: defconfig: Add Toradex Embedded Controller config arm64: defconfig: Enable TPIC2810 GPIO expander riscv: defconfig: spacemit: enable clock controller driver for SpacemiT K1 arm64: defconfig: Enable TMP102 as module arm64: defconfig: Enable hwspinlock and eQEP for K3 arm64: defconfig: Add CDNS_DSI and CDNS_PHY config riscv: defconfig: spacemit: enable gpio support for K1 SoC arm64: defconfig: Enable IPQ5424 RDP466 base configs riscv: Enable PM_GENERIC_DOMAINS for T-Head SoCs
2025-05-28Merge tag 'pwm/for-6.16-rc1' of ↵Linus Torvalds1-25/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "This time around the pwm changes for the next release contain three new drivers (loongson, mc33xs2410 and rzg2l-gpt) and the usual collection of cleanups in both the core and drivers, support for new variants in existing drivers, conversion of dt bindings to yaml and documentation updates. Thanks for contributions and reviews go to Alexey Charkov, AngeloGioacchino Del Regno, Bartosz Golaszewski, Biju Das, Binbin Zhou, Dan Carpenter, Dimitri Fedrau, Geert Uytterhoeven, George Stark, Huacai Chen, Juxin Gao, Krzysztof Kozlowski, Kuninori Morimoto, Laurent Pinchart, Neil Armstrong, Nuno Sá, Rob Herring, and Trevor Gamblin" * tag 'pwm/for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (39 commits) dt-bindings: timer: renesas,tpu: remove binding documentation pwm: adp5585: make sure to include mod_devicetable.h pwm: Tidyup PWM menu for Renesas pwm: Restore alphabetic ordering in Kconfig and Makefile pwm: Formally describe the procedure used to pick a hardware waveform setting pwm: Let pwm_set_waveform_might_sleep() return 0 instead of 1 after rounding up pwm: Let pwm_set_waveform_might_sleep() fail for exact but impossible requests ARM: shmobile: defconfig: Enable more support for RZN1D-DB/EB arm64: defconfig: Add Renesas MSIOF sound support arm64: defconfig: Enable Renesas RZ/G2L GPT config pwm: add support for NXPs high-side switch MC33XS2410 dt-bindings: pwm: add support for MC33XS2410 pwm: rzg2l-gpt: Accept requests for too high period length dt-bindings: pwm: vt8500-pwm: Convert to YAML dt-bindings: pwm: mediatek,pwm-disp: Add compatible for MT6893 pwm: Fix various formatting issues in kernel-doc pwm: Add support for RZ/G2L GPT dt-bindings: pwm: Add RZ/G2L GPT binding pwm: Better document return value of pwm_round_waveform_might_sleep() pwm: loongson: Fix an error code in probe() ...
2025-05-26Merge tag 'v6.16-p1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Fix memcpy_sglist to handle partially overlapping SG lists - Use memcpy_sglist to replace null skcipher - Rename CRYPTO_TESTS to CRYPTO_BENCHMARK - Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS - Hide CRYPTO_MANAGER - Add delayed freeing of driver crypto_alg structures Compression: - Allocate large buffers on first use instead of initialisation in scomp - Drop destination linearisation buffer in scomp - Move scomp stream allocation into acomp - Add acomp scatter-gather walker - Remove request chaining - Add optional async request allocation Hashing: - Remove request chaining - Add optional async request allocation - Move partial block handling into API - Add ahash support to hmac - Fix shash documentation to disallow usage in hard IRQs Algorithms: - Remove unnecessary SIMD fallback code on x86 and arm/arm64 - Drop avx10_256 xts(aes)/ctr(aes) on x86 - Improve avx-512 optimisations for xts(aes) - Move chacha arch implementations into lib/crypto - Move poly1305 into lib/crypto and drop unused Crypto API algorithm - Disable powerpc/poly1305 as it has no SIMD fallback - Move sha256 arch implementations into lib/crypto - Convert deflate to acomp - Set block size correctly in cbcmac Drivers: - Do not use sg_dma_len before mapping in sun8i-ss - Fix warm-reboot failure by making shutdown do more work in qat - Add locking in zynqmp-sha - Remove cavium/zip - Add support for PCI device 0x17D8 to ccp - Add qat_6xxx support in qat - Add support for RK3576 in rockchip-rng - Add support for i.MX8QM in caam Others: - Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up - Add new SEV/SNP platform shutdown API in ccp" * tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits) x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining crypto: qat - add missing header inclusion crypto: api - Redo lookup on EEXIST Revert "crypto: testmgr - Add hash export format testing" crypto: marvell/cesa - Do not chain submitted requests crypto: powerpc/poly1305 - add depends on BROKEN for now Revert "crypto: powerpc/poly1305 - Add SIMD fallback" crypto: ccp - Add missing tee info reg for teev2 crypto: ccp - Add missing bootloader info reg for pspv5 crypto: sun8i-ce - move fallback ahash_request to the end of the struct crypto: octeontx2 - Use dynamic allocated memory region for lmtst crypto: octeontx2 - Initialize cptlfs device info once crypto: xts - Only add ecb if it is not already there crypto: lrw - Only add ecb if it is not already there crypto: testmgr - Add hash export format testing crypto: testmgr - Use ahash for generic tfm crypto: hmac - Add ahash support crypto: testmgr - Ignore EEXIST on shash allocation crypto: algapi - Add driver template support to crypto_inst_setname crypto: shash - Set reqsize in shash_alg ...
2025-05-23mfd: sec: Split into core and transport (i2c) driversAndré Draszik1-1/+1
As a preparation for adding support for Samsung's S2MPG10, which is connected via SPEEDY / ACPM rather than I2C, split out (move) all I2C-specific driver code into its own kernel module, sec-i2c, and make the existing sec-core module be just the transport-agnostic core driver kernel module. At the same time, update all defconfigs that reference the old kconfig symbol name. While at it, also update file header comments and module description(s) to drop references to 'mfd', and update comments to be C-style, not C++. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-8-d66d5f39b6bf@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-05-22Merge tag 'v6.16-rockchip-defconfig64-1' of ↵Arnd Bergmann1-0/+3
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/defconfig Enable Rockchip SAI and ES8328 modules. * tag 'v6.16-rockchip-defconfig64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: defconfig: Enable Rockchip SAI and ES8328 Link: https://lore.kernel.org/r/4060740.R56niFO833@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'mtk-defconfig-for-v6.16' of ↵Arnd Bergmann1-0/+12
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig MediaTek ARM64 defconfig updates for v6.16 This enables some drivers as modules to enable fully booting some of the supported MediaTek boards; In particular, this enables the following drivers as module: - PHYs for PCIe, HDMI, DSI and DisplayPort for all boards - MediaTek UART DMA Controller, also for all boards - MDP3 driver for MT8186/88/95 (Chromebooks and Genio variants) - Auxiliary ADC for the MT6357/58/59 PMICs found on both Genio EVK and Chromebooks based on designs with MT8183/86/88/92/95 SoCs - iTE IT5205 Type-C USB Alternate Mode Passive MUX, found on both Chromebooks and Genio EVKs with MT8188/95 - Richtek RT1715 Type-C PD Controller, found on all Genio boards - Himax HX8279 DSI panel DriverIC and KD070FHFID015 panel, found on various revisions of the Genio Evaluation Kit boards. * tag 'mtk-defconfig-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: arm64: defconfig: Enable configs for MediaTek Genio EVK boards arm64: defconfig: mediatek: enable PHY drivers Link: https://lore.kernel.org/r/20250520114356.1194450-2-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'qcom-arm64-defconfig-for-6.16-2' of ↵Arnd Bergmann1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig One more Qualcomm Arm64 defconfig update for v6.16 Enable global clock controller and TLMM pinctrl drivers for IPQ5424 to make this boot. * tag 'qcom-arm64-defconfig-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable IPQ5424 RDP466 base configs Link: https://lore.kernel.org/r/20250520025119.40021-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selectedFabio Estevam1-1/+1
Since commit 17ec3e71ba79 ("crypto: lib/Kconfig - Hide arch options from user"), the CRYPTO_CHACHA20_NEON option is no longer selected by default due to changes in how crypto library options are exposed and selected. To restore the previous behavior and ensure CRYPTO_CHACHA20_NEON is enabled, explicitly select CONFIG_CRYPTO_CHACHA20 in the defconfig. This pulls in CRYPTO_LIB_CHACHA_INTERNAL and allows CRYPTO_CHACHA20_NEON to be selected automatically as before. Fixes: 17ec3e71ba79 ("crypto: lib/Kconfig - Hide arch options from user") Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21arm64: defconfig: enable ACPM protocol and Exynos mailboxTudor Ambarus1-0/+2
Enable the Samsung Exynos ACPM protocol and its transport layer, the Exynos mailbox driver. Samsung Exynos platforms implement ACPM to provide support for PMIC, clock frequency scaling, clock configuration and temperature sensors. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20250207-gs101-acpm-dt-v4-4-230ba8663a2d@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250513101754.23158-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'ti-k3-config-for-v6.16' of ↵Arnd Bergmann1-0/+6
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig TI K3 defconfig updates for v6.16 - Enable Cadence DSI and PHY driver support for DSI support on BeagleBone-AI64, BeaglePlay, BeagleY-AI, All TI EVMs etc. - Enable hardware spinlock and Quadrature Encoder Pulse (QEP) support for AM64-SK and other boards. - Enable TMP102 driver to support Phytec phyCORE-AM68x/TDA4x and the phyGATE-Tauri-L-iMX8MM - Enable TPIC2810 for AM64-SK LED GPIO control. * tag 'ti-k3-config-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: defconfig: Enable TPIC2810 GPIO expander arm64: defconfig: Enable TMP102 as module arm64: defconfig: Enable hwspinlock and eQEP for K3 arm64: defconfig: Add CDNS_DSI and CDNS_PHY config Link: https://lore.kernel.org/r/20250512144738.dv63fd4fyuly3s44@diocese Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-14arm64: defconfig: Enable configs for MediaTek Genio EVK boardsNícolas F. R. A. Prado1-0/+9
Enable the missing configs to get all devices on the MediaTek Genio 1200, 700, 510 and 350 EVK boards probing, as indicated by the DT kselftest. This includes support for: Genio 1200/700/510/350: * MT6359/MT6357 PMICs Auxiliary ADC Genio 1200/700/510: * MDP3 (video scaling and color space conversion IP block) * ITE IT5205 Type-C USB Alternate Mode Passive MUX * Himax HX8279 controller based KD070FHFID078 DSI panel Genio 700/510: * Richtek RT1715 USB Type-C PD Controller Genio 1200: * MediaTek PCIe PHY * Mediatek MT6360 USB Type-C Port Controller Genio 350: * STARTEK KD070FHFID015 DSI panel * MediaTek UART DMA controller (APDMA) Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250513-genio-defconfig-v1-1-c3862f91b6b2@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-14arm64: defconfig: mediatek: enable PHY driversVignesh Raman1-0/+3
The mediatek display driver fails to probe on mt8173-elm-hana and mt8183-kukui-jacuzzi-juniper-sku16 in v6.14-rc4 due to missing PHY configurations. Commit 924d66011f24 ("drm/mediatek: stop selecting foreign drivers") stopped selecting the MediaTek PHY drivers, requiring them to be explicitly enabled in defconfig. Enable the following PHY drivers for MediaTek platforms: CONFIG_PHY_MTK_HDMI=m for HDMI display CONFIG_PHY_MTK_MIPI_DSI=m for DSI display CONFIG_PHY_MTK_DP=m for DP display Fixes: 924d66011f24 ("drm/mediatek: stop selecting foreign drivers") Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Link: https://lore.kernel.org/r/20250512131933.1247830-1-vignesh.raman@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-14arm64: defconfig: enable STM32 LP timer clockevent driverFabrice Gasnier1-0/+2
Enable the STM32 LP timer MFD core and clockevent drivers used on STM32MP257F-EV1 board, for PSCI OSI. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20250429125133.1574167-6-fabrice.gasnier@foss.st.com Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-05-14pwm: Tidyup PWM menu for RenesasKuninori Morimoto1-3/+3
Because current PWM Kconfig is sorting by symbol name, it looks strange ordering in menuconfig. => [ ] Renesas R-Car PWM support => [ ] Renesas TPU PWM support [ ] Rockchip PWM support => [ ] Renesas RZ/G2L General PWM Timer support => [ ] Renesas RZ/G2L MTU3a PWM Timer support Let's use common CONFIG_PWM_RENESAS_xxx symbol name for Renesas, and sort it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/877c2mxrrr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2025-05-12Merge tag 'imx-defconfig-6.16' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig i.MX defconfig change for 6.16: - Enable Toradex Embedded Controller driver as module in arm64 defconfig * tag 'imx-defconfig-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Add Toradex Embedded Controller config Link: https://lore.kernel.org/r/20250512103858.50501-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-12crypto: tcrypt - rename CRYPTO_TEST to CRYPTO_BENCHMARKEric Biggers1-1/+1
tcrypt is actually a benchmarking module and not the actual tests. This regularly causes confusion. Update the kconfig option name and help text accordingly. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-05-09arm64: defconfig: Enable Rockchip SAI and ES8328Nicolas Frattaroli1-0/+3
The RK3576 uses Rockchip SAI for audio output. Meanwhile, the Sige5 board, which uses the RK3576 and is supported by mainline, uses an ES8388 codec over I2C with the ES8328 driver implementing support for this codec. Enable both in the defconfig. Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Link: https://lore.kernel.org/r/20250506-rk3576-sai-v4-5-a8b5f5733ceb@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-09arm64: defconfig: Add Toradex Embedded Controller configFrancesco Dolcini1-0/+1
Enable config for Toradex SMARC Embedded Controller, this is required for proper reset and power-off functionalities on Toradex SMARC iMX8M Plus. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-05-05crypto: arm64/sha256 - implement library instead of shashEric Biggers1-1/+0
Instead of providing crypto_shash algorithms for the arch-optimized SHA-256 code, instead implement the SHA-256 library. This is much simpler, it makes the SHA-256 library functions be arch-optimized, and it fixes the longstanding issue where the arch-optimized SHA-256 was disabled by default. SHA-256 still remains available through crypto_shash, but individual architectures no longer need to handle it. Remove support for SHA-256 finalization from the ARMv8 CE assembly code, since the library does not yet support architecture-specific overrides of the finalization. (Support for that has been omitted for now, for simplicity and because usually it isn't performance-critical.) To match sha256_blocks_arch(), change the type of the nblocks parameter of the assembly functions from int or 'unsigned int' to size_t. Update the ARMv8 CE assembly function accordingly. The scalar and NEON assembly functions actually already treated it as size_t. While renaming the assembly files, also fix the naming quirks where "sha2" meant sha256, and "sha512" meant both sha256 and sha512. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-05-05arm64: defconfig: Add Renesas MSIOF sound supportKuninori Morimoto1-0/+1
Renesas V4H Sparrow Hawk board needs MSIOF Sound driver. Support it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/87o6wu2wzm.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-05-05arm64: defconfig: Enable Renesas RZ/G2L GPT configBiju Das1-0/+1
Enable PWM config for Renesas RZ/G2L GPT as it is populated on the RZ/G2L and RZ/V2L SMARC EVKs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250424054050.28310-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-05-02arm64: defconfig: Enable TPIC2810 GPIO expanderNishanth Menon1-0/+1
AM642-SK uses TPIC2810 I2C GPIO expander for LEDs. Link: https://lore.kernel.org/r/20250421143926.2009535-1-nm@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2025-04-25arm64: defconfig: Enable TMP102 as moduleDominik Haller1-0/+1
Enable the driver for the TI TMP102 temperature sensors used on the Phytec phyCORE-AM68x/TDA4x and the phyGATE-Tauri-L-iMX8MM. Signed-off-by: Dominik Haller <d.haller@phytec.de> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20250423133635.29897-3-d.haller@phytec.de Signed-off-by: Nishanth Menon <nm@ti.com>
2025-04-25arm64: defconfig: Enable hwspinlock and eQEP for K3Judith Mendez1-0/+2
Enable CONFIG_HWSPINLOCK_OMAP to allow usage of these devices across K3 SoC's. Also enable CONFIG_TI_EQEP which is enabled by default on am64x SK board. Signed-off-by: Judith Mendez <jm@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250421201055.3889680-1-jm@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2025-04-25arm64: defconfig: Add CDNS_DSI and CDNS_PHY configJayesh Choudhary1-0/+2
Enable configs for cdns-dsi and cdns-dphy drivers required for DSI display on the following platforms: J721E-EVM, J721E-BeagleBone-AI64, J721S2-EVM, AM68-SK, J722S-EVM, BeagleY-AI, AM62P5-SK, J784S4-EVM and J742S2-EVM The DSI wrapper driver used by all the above mentioned platforms, cdns-dsi-j721e is enabled by default if cdns-dsi config is enabled. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Reviewed-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20250416182930.32132-1-j-choudhary@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2025-04-16arm64: defconfig: Enable IPQ5424 RDP466 base configsSricharan Ramabadhran1-0/+2
Enable GCC, Pinctrl for Qualcomm's IPQ5424 SoC which is required to boot IPQ5424-RDP466 boards to a console shell. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/20241028060506.246606-7-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-04-09arm64: defconfig: Remove individual Renesas SoC entriesLad Prabhakar1-23/+0
Remove explicit entries for individual Renesas SoCs from the defconfig file. Since all Renesas SoCs are enabled by default when ARCH_RENESAS is selected, and ARCH_RENESAS is already enabled in the defconfig, listing them separately is redundant. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250401090133.68146-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-03-20Merge tag 'qcom-arm64-defconfig-for-6.15' of ↵Arnd Bergmann1-0/+7
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig Qualcomm Arm64 defconfig updates for v6.15 Explicitly enable the DRM_DISPLAY_CONNECTOR module, as this is used by a variety of boards. Enable retimer and redriver drivers used in the USB configuration of a variety of Qualcomm X Elite-based devices. Enable the NSS clock controller driver for IPQ9574, the new Iris video encoder/decoder driver and it's clock controller, as well as the QCM2290 GPU clocck ontroller. * tag 'qcom-arm64-defconfig-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable USB retimer and redriver arm64: defconfig: Build NSS Clock Controller driver for IPQ9574 arm64: defconfig: enable Qualcomm IRIS & VIDEOCC_8550 as module arm64: defconfig: enable DRM_DISPLAY_CONNECTOR as a module arm64: defconfig: Enable Qualcomm QCM2290 GPU clock controller Link: https://lore.kernel.org/r/20250319144354.2281720-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-20Merge tag 'ti-k3-config-for-v6.15' of ↵Arnd Bergmann1-0/+6
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig TI K3 defconfig updates for v6.15 - Enable Support for SPI NAND flashes on AM62Ax/J721s2 and other boards - HSR protocol support for AM65/AM64 ICSSG based multi-port ethernet - Greybus modules to support CC1352P7 chips on BeaglePlay * tag 'ti-k3-config-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: defconfig: Enable SPI NAND flashes arm64: defconfig: Enable HSR protocol driver arm64: defconfig: Enable gb_beagleplay arm64: defconfig: Enable TISCI Interrupt Router and Aggregator Link: https://lore.kernel.org/r/dec6ccc4-76df-47c3-8622-2c08035eff3e@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19arm64: defconfig: Enable USB retimer and redriverBjorn Andersson1-0/+2
Several boards based on the Qualcomm X Elite platform uses the NXP PTN3222 USB redriver and the Parade PS883x USB Type-C retimer. Without these USB, and in some cases display, doesn't probe successfully, so enable them. Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250318-xelite-retimer-redriver-v1-1-b3e85a37d294@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-17arm64: defconfig: Build NSS Clock Controller driver for IPQ9574Devi Priya1-0/+1
NSSCC driver is needed to enable the ethernet interfaces present in RDP433 based on IPQ9574. Since this is not necessary for bootup enabling it as a module. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Link: https://lore.kernel.org/r/20250313110359.242491-7-quic_mmanikan@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-07arm64: defconfig: Enable SPI NAND flashesSanthosh Kumar K1-0/+1
Add support for SPI NAND flashes on ARM64 boards/EVMs such as: 1. W35N01JW on AM62x LP SK, AM62A7 SK, J721S2 EVM, J784S4 EVM, J722S EVM, J742S2 EVM 2. W25N01JW on AM62Lx EVM by enabling the MTD_SPI_NAND config as a module. Signed-off-by: Santhosh Kumar K <s-k6@ti.com> Link: https://lore.kernel.org/r/20250116035145.370734-1-s-k6@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2025-03-06arm64: defconfig: Enable Synopsys HDMI receiverSebastian Reichel1-0/+2
The Rockchip RK3588 has a built-in HDMI receiver block from Synopsys. Let's enable the driver for it. Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20250306072842.287142-4-dmitry.osipenko@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06arm64: defconfig: Enable Rockchip UFS host driverShawn Lin1-0/+1
Enable Rockchip UFS host driver. This driver is first introduced on Rockchip RK3576 SoC, and will be used for more SoCs in near future, so add it to defconfig will make these platforms work better. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/1741161252-138526-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-05arm64: defconfig: enable Qualcomm IRIS & VIDEOCC_8550 as moduleNeil Armstrong1-0/+2
In order to support the Qualcomm IRIS driver on the Qualcomm SM8550 platform, enable the IRIS and the VIDEOCC_8550 dependency as modules. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250227-topic-sm8x50-upstream-iris-defconfig-v2-1-13b490a4f402@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-28arm64: defconfig: Enable HSR protocol driverRavi Gunasekaran1-0/+1
High-availability Seamless Redundancy (HSR) protocol can be realized with any two port ethernet controller. Many of TI's K3 SoCs, such as AM64x and AM65x, support multi-port ethernet controller like those seen on AM654x-EVM and AM64xx-EVM platforms. So, enable the HSR driver to support this protocol. Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/20250227111828.1963918-1-m-malladi@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2025-02-26arm64: defconfig: Enable gb_beagleplayAyush Singh1-0/+2
Enable greybus driver used by TI K3 AM625 BeaglePlay. The driver communicates with TI CC1352P7 co-processor which acts as Greybus SVC. Additionally, it also provides firmware upload API support for TI CC1352P7 over UART. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Ayush Singh <ayush@beagleboard.org> Link: https://lore.kernel.org/r/20250131-defconfig-beagleplay-v3-1-f556b851ff96@beagleboard.org Signed-off-by: Nishanth Menon <nm@ti.com>
2025-02-15arm64: defconfig: enable DRM_DISPLAY_CONNECTOR as a moduleDmitry Baryshkov1-0/+1
The display connector family of bridges is used on a plenty of ARM64 platforms (including, but not being limited to several Qualcomm Robotics and Dragonboard platforms). It doesn't make sense for the DRM drivers to select the driver, so select it via the defconfig. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250214-arm64-display-connector-v1-1-306bca76316e@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-15arm64: defconfig: Enable Qualcomm QCM2290 GPU clock controllerDmitry Baryshkov1-0/+1
Enable GPU clock controller for the Qualcomm QCM2290 SoC. This chip is used e.g. on the Qualcomm Robotics RB1 platform. The clock controller is required for the GPU and GPU IOMMU to work on that device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250214-rb1-enable-gpucc-v1-1-346b5b579fca@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-06arm64: defconfig: Enable TISCI Interrupt Router and AggregatorVaishnav Achath1-0/+2
Enable TISCI Interrupt Router and Interrupt Aggregator drivers. These IPs are found in all TI K3 SoCs like J721E, AM62X and is required for core functionality like DMA, GPIO Interrupts which is necessary during boot, thus make them built-in. bloat-o-meter summary on vmlinux: add/remove: 460/1 grow/shrink: 4/0 up/down: 162483/-8 (162475) ... Total: Before=31615984, After=31778459, chg +0.51% These configs were previously selected for ARCH_K3 in respective Kconfigs till commit b8b26ae398c4 ("irqchip/ti-sci-inta : Add module build support") and commit 2d95ffaecbc2 ("irqchip/ti-sci-intr: Add module build support") dropped them and few driver configs (TI_K3_UDMA, TI_K3_RINGACC) dependent on these also got disabled due to this. While re-enabling the TI_SCI_INT_*_IRQCHIP configs, these configs with missing dependencies (which are already part of arm64 defconfig) also get re-enabled which explains the slightly larger size increase from the bloat-o-meter summary. Fixes: 2d95ffaecbc2 ("irqchip/ti-sci-intr: Add module build support") Fixes: b8b26ae398c4 ("irqchip/ti-sci-inta : Add module build support") Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Tested-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20250205062229.3869081-1-vaishnav.a@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2025-01-25Merge tag 'soc-defconfig-6.14' of ↵Linus Torvalds1-1/+30
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "As usual, a number of new drivers get added to the defconfig to support additional hardware. The stm32 defconfig also turns off a few options to optimize for size" * tag 'soc-defconfig-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits) dt-bindings: soc: samsung: exynos-pmu: Add exynos990-pmu compatible arm64: defconfig: enable Maxim TCPCI driver ARM: configs: stm32: Remove useless flags in STM32 defconfig ARM: configs: stm32: Remove CRYPTO in STM32 defconfig ARM: configs: stm32: Clean STM32 defconfig ARM: configs: stm32: Remove FLASH_MEM_BASE and FLASH_SIZE in STM32 defconfig arm64: defconfig: Enable pinctrl-based I2C mux arm64: defconfig: Enable Rockchip extensions for Synopsys DW HDMI QP arm64: defconfig: Enable RFKILL GPIO arm64: defconfig: Enable TI K3 M4 remoteproc driver arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller arm64: defconfig: Enable basic Qualcomm SM8750 SoC drivers arm64: defconfig: remove obsolete CONFIG_SM_DISPCC_8650 arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300 arm64: defconfig: Enable sa8775p clock controllers arm64: defconfig: Enable MediaTek DWMAC arm64: defconfig: Enable sound for MT8188 arm64: defconfig: Enable MediaTek STAR Ethernet MAC riscv: defconfig: enable pinctrl and dwmac support for TH1520 arm64: defconfig: Enable Amazon Elastic Network Adaptor ...
2025-01-25Merge tag 'soc-new-6.14' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new SoC support from Arnd Bergmann: "Two new SoC families are added here, with devicetree files and a little bit of infrastructure to allow booting: - Blaize BLZP1600 is an AI chip using custom GSP (Graph Streaming Processor) cores for computation, and two small Cortex-A53 cores that run the operating system. - SpacemiT K1 is a 64-bit RISC-V chip, using eight custom RVA22 compatible CPU cores with vector support. Also marketed at AI applications, it has a much slower NPU compared to BLZP1600, but in turn focuses on the CPU performance" * tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: riscv: dts: spacemit: move aliases to board dts riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3 riscv: defconfig: enable SpacemiT SoC riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree riscv: dts: add initial SpacemiT K1 SoC device tree riscv: add SpacemiT SoC family Kconfig support dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC dt-bindings: timer: Add SpacemiT K1 CLINT dt-bindings: riscv: add SpacemiT K1 bindings dt-bindings: riscv: Add SpacemiT X60 compatibles MAINTAINERS: setup support for SpacemiT SoC tree MAINTAINER: Add entry for Blaize SoC arm64: defconfig: Enable Blaize BLZP1600 platform arm64: dts: Add initial support for Blaize BLZP1600 CB2 arm64: Add Blaize BLZP1600 SoC family dt-bindings: arm: blaize: Add Blaize BLZP1600 SoC dt-bindings: Add Blaize vendor prefix
2025-01-24Merge tag 'arm-soc/for-6.14/defconfig-arm64' of ↵Arnd Bergmann1-0/+1
https://github.com/Broadcom/stblinux into soc/defconfig This pull request contains Broadcom ARM64-based SoCs defconfig updates for 6.14, please pull the following: - Stefan enables the pinctrl-based I2C mux driver which is used on Raspberry Pi 4 based systems since we switched the Device Tree files to use the i2c mux representation * tag 'arm-soc/for-6.14/defconfig-arm64' of https://github.com/Broadcom/stblinux: arm64: defconfig: Enable pinctrl-based I2C mux Link: https://lore.kernel.org/r/20250123203302.1491843-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'qcom-arm64-defconfig-for-6.14' of ↵Arnd Bergmann1-1/+15
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig Qualcomm Arm64 defconfig updates for v6.14 Enable core drivers for SM8750, QCS8300, SA8775P, and QCS615. Enable the IPQ CMD PLL driver. Drop the 8650 display clock option, now that the driver has been consolidated with 8550. * tag 'qcom-arm64-defconfig-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller arm64: defconfig: Enable basic Qualcomm SM8750 SoC drivers arm64: defconfig: remove obsolete CONFIG_SM_DISPCC_8650 arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300 arm64: defconfig: Enable sa8775p clock controllers arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS615 Link: https://lore.kernel.org/r/20250111173306.392204-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'v6.14-rockchip-defconfig64-1' of ↵Arnd Bergmann1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/defconfig Rockchip DRM extension for the DW-HDMI-QP controller and rfkill-gpio. * tag 'v6.14-rockchip-defconfig64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: defconfig: Enable Rockchip extensions for Synopsys DW HDMI QP arm64: defconfig: Enable RFKILL GPIO Link: https://lore.kernel.org/r/3095859.687JKscXgg@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'ti-k3-config-for-v6.14' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig TI K3 defconfig updates for v6.14 - Enable M4F remote proc support for AM62x based platforms such as BeaglePlay, phyboard, verdin, SK etc. * tag 'ti-k3-config-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: defconfig: Enable TI K3 M4 remoteproc driver Link: https://lore.kernel.org/r/20250110210759.fd6a3ed7q52zkpnw@rogue Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'mtk-defconfig-for-v6.14' of ↵Arnd Bergmann1-0/+6
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig MediaTek soc defcofnig updates for v6.14 This enables building modules for the integrated Ethernet controllers (MediaTek STAR and MediaTek DWMAC Glue layer) found on various MediaTek SoCs, and building modules for enabling the sound card on MT8188 and DSP on MT8186. * tag 'mtk-defconfig-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: arm64: defconfig: Enable MediaTek DWMAC arm64: defconfig: Enable sound for MT8188 arm64: defconfig: Enable MediaTek STAR Ethernet MAC Link: https://lore.kernel.org/r/20250108100826.32458-3-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15arm64: defconfig: enable Maxim TCPCI driverAndré Draszik1-0/+1
Enable the Maxim max33359 as this is used by the gs101-oriole (Google Pixel 6) board. Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20241203-gs101-phy-lanes-orientation-dts-v2-1-1412783a6b01@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241231131742.134329-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-26 01:12:33 +0300